Search Results

Search found 1786 results on 72 pages for 'jack brown'.

Page 70/72 | < Previous Page | 66 67 68 69 70 71 72  | Next Page >

• Sound issues after trying everything

  - by Lerp

  I cannot get my sound working properly, no matter what I do, there's always some problem. It's very annoying as it's the only thing preventing me from making Ubuntu my main OS. At the moment my sound always plays through both my speakers and my headphones regardless except the sound through the headphones is crackly. It is also a bit quiet even though everything is maxed. I've managed to improve the situation to a point where the sound out of my speakers is perfect but I have none at all from my headphones. I do have two connectors listed in the sound settings but regardless of which one is selected it always plays through the speakers. I think this might have something to do with the fact that my speakers are plugging into the front of my computer, typically the headphone jack, and my headphones are plugging into the back but when I try disconnecting the speakers from the front there is still no sound from the headphones. I fixed the speaker sound by going through the sound settings and making sure they were all set to 100% then rebooting. Things I have tried: Maxing everything and unmuting everything in alsamixer Uninstalling pulseaudio Making gstreamer use only alsa via gstreamer-properties. This worked with the sound test button including independent sound between headphones and speakers but when I reset the computer it no longer worked. So I tried setting it manually in gconf-editor which didn't work either. Reinstalling alsa and pulseaudio Setting the model in /etc/modprobe.d/alsa-base.conf to 6stack and 6stack-dig neither worked. Upgrading to 12.10 Here's some command output to help you diagnose my problem. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD198x Headphone [AD198x Headphone] Subdevices: 1/1 Subdevice #0: subdevice #0 sudo lshw -C sound *-multimedia description: Audio device product: 82801JI (ICH10 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:70 memory:f7ff8000-f7ffbfff cat /proc/asound/card*/codec* | grep "Codec" Codec: Analog Devices AD1989B cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 options snd-hda-intel model=6stack

  Read the article

• How do I resolve this exercise on C++? [closed]

  - by user40630

  (Card Shuffling and Dealing) Create a program to shuffle and deal a deck of cards. The program should consist of class Card, class DeckOfCards and a driver program. Class Card should provide: a) Data members face and suit of type int. b) A constructor that receives two ints representing the face and suit and uses them to initialize the data members. c) Two static arrays of strings representing the faces and suits. d) A toString function that returns the Card as a string in the form “face of suit.” You can use the + operator to concatenate strings. Class DeckOfCards should contain: a) A vector of Cards named deck to store the Cards. b) An integer currentCard representing the next card to deal. c) A default constructor that initializes the Cards in the deck. The constructor should use vector function push_back to add each Card to the end of the vector after the Card is created and initialized. This should be done for each of the 52 Cards in the deck. d) A shuffle function that shuffles the Cards in the deck. The shuffle algorithm should iterate through the vector of Cards. For each Card, randomly select another Card in the deck and swap the two Cards. e) A dealCard function that returns the next Card object from the deck. f) A moreCards function that returns a bool value indicating whether there are more Cards to deal. The driver program should create a DeckOfCards object, shuffle the cards, then deal the 52 cards. This above is the exercise I'm trying to solve. I'd be very much appreciated if someone could solve it and explain it to me. The main idea of the program is quite simple. What I don't get is how to build the constructor for the class DeckOfCards and how to generate the 52 cards of the deck with different suits and faces. Untill now I've managed to do this: #include <iostream> #include <vector> using namespace std; /* * */ /* a) Data members face and suit of type int. b) A constructor that receives two ints representing the face and suit and uses them to initialize the data members. c) Two static arrays of strings representing the faces and suits. d) A toString function that returns the Card as a string in the form “face of suit.” You can use the + operator to concatenate strings. */ class Card { public: Card(int, int); string toString(); private: int suit, face; static string faceNames[13]; static string suitNames[4]; }; string Card::faceNames[13] = {"Ace","Two","Three","Four","Five","Six","Seven","Eight","Nine","Ten","Queen","Jack","King"}; string Card::suitNames[4] = {"Diamonds","Clubs","Hearts","Spades"}; string Card::toString() { return faceNames[face]+" of "+suitNames[suit]; } Card::Card(int f, int s) :face(f), suit(s) { } /* Class DeckOfCards should contain: a) A vector of Cards named deck to store the Cards. b) An integer currentCard representing the next card to deal. c) A default constructor that initializes the Cards in the deck. The constructor should use vector function push_back to add each Card to the end of the vector after the Card is created and initialized. This should be done for each of the 52 Cards in the deck. d) A shuffle function that shuffles the Cards in the deck. The shuffle algorithm should iterate through the vector of Cards. For each Card, randomly select another Card in the deck and swap the two Cards. e) A dealCard function that returns the next Card object from the deck. f) A moreCards function that returns a bool value indicating whether there are more Cards to deal. */ class DeckOfCards { public: DeckOfCards(); void shuffleCards(); Card dealCard(); bool moreCards(); private: vector<Card> deck(52); int currentCard; }; int main(int argc, char** argv) { return 0; } DeckOfCards::DeckOfCards() { //I'm stuck here I have no idea of what to take out of here. //I still don't fully get the idea of class inside class and that's turning out as a problem. I try to find a way to set the suits and faces members of the class Card but I can't figure out how. for(int i=0; i<deck.size(); i++) { deck[i]//....There is no function to set them. They must be set when initialized. But how?? } } For easier reading: http://pastebin.com/pJeXMH0f

  Read the article

• How to Organize a Programming Language Club

  - by Ben Griswold

  I previously noted that we started a language club at work.  You know, I searched around but I couldn’t find a copy of the How to Organize a Programming Language Club Handbook. Maybe it’s sold out?  Yes, Stack Overflow has quite a bit of information on how to learn and teach new languages and there’s also a good number of online tutorials which provide language introductions but I was interested in group learning.  After   two months of meetings, I present to you the Unofficial How to Organize a Programming Language Club Handbook.  1. Gauge interest. Start by surveying prospects. “Excuse me, smart-developer-whom-I-work-with-and-I-think-might-be-interested-in-learning-a-new-coding-language-with-me. Are you interested in learning a new language with me?” If you’re lucky, you work with a bunch of really smart folks who aren’t shy about teaching/learning in a group setting and you’ll have a collective interest in no time.  Simply suggesting the idea is the only effort required.  If you don’t work in this type of environment, maybe you should consider a new place of employment.  2. Make it official. Send out a “Welcome to the Club” email: There’s been talk of folks itching to learn new languages – Python, Scala, F# and Haskell to name a few.  Rather than taking on new languages alone, let’s learn in the open.  That’s right.  Let’s start a languages club.  We’ll have everything a real club needs – secret handshake, goofy motto and a high-and-mighty sense that we’re better than everybody else. T-shirts?  Hell YES!  Anyway, I’ve thrown this idea around the office and no one has laughed at me yet so please consider this your very official invitation to be in THE club. [Insert your ideas about how the club might be run, solicit feedback and suggestions, ask what other folks would like to get out the club, comment about club hazing practices and talk up the T-shirts even more. Finally, call out the languages you are interested in learning and ask the group for their list.] 3.  Send out invitations to the first meeting.  Don’t skimp!  Hallmark greeting cards for everyone.  Personalized.  Hearts over the I’s and everything.  Oh, and be sure to include the list of suggested languages with vote count.  Here the list of languages we are interested in: Python 5 Ruby 4 Objective-C 3 F# 2 Haskell 2 Scala 2 Ada 1 Boo 1 C# 1 Clojure 1 Erlang 1 Go 1 Pi 1 Prolog 1 Qt 1 4.  At the first meeting, there must be cake.  Lots of cake. And you should tackle some very important questions: Which language should we start with?  You can immediately go with the top vote getter or you could do as we did and designate each person to provide a high-level review of each of the proposed languages over the next two weeks.  After all presentations are completed, vote on the language. Our high-level review consisted of answers to a series of questions. Decide how often and where the group will meet.  We, for example, meet for a brown bag lunch every Wednesday.  Decide how you’re going to learn.  We determined that the best way to learn is to just dive in and write code.  After choosing our first language (Python), we talked about building an application, or performing coding katas, but we ultimately choose to complete a series of Project Euler problems.  We kept it simple – each member works out the same two problems each week in preparation of a code review the following Wednesday. 5.  Code, Review, Learn.  Prior to the weekly meeting, everyone uploads their solutions to our internal wiki.  Each Project Euler problem has a dedicated page.  In the meeting, we use a really fancy HD projector to show off each member’s solution.  It is very important to use an HD projector.  Again, don’t skimp!  Each code author speaks to their solution, everyone else comments, applauds, points fingers and laughs, etc.  As much as I’ve learned from solving the problems on my own, I’ve learned at least twice as much at the group code review.  6.  Rinse. Lather. Repeat.  We’ve hosted the language club for 7 weeks now.  The first meeting just set the stage.  The next two meetings provided a review of the languages followed by a first language selection.  The remaining meetings focused on Python and Project Euler problems.  Today we took a vote as to whether or not we’re ready to switch to another language and/or another problem set.  Pretty much everyone wants to stay the course for a few more weeks at least.  Until then, we’ll continue to code the next two solutions, review and learn. Again, we’ve been having a good time with the programming language club.  I’m glad it got off the ground.  What do you think?  Would you be interested in a language club?  Any suggestions on what we might do better?

  Read the article

• CEN/CENELEC Lacks Perspective

  - by trond-arne.undheim

  Over the last few months, two of the European Standardization Organizations (ESOs), CEN and CENELEC have circulated an unfortunate position statement distorting the facts around fora and consortia. For the benefit of outsiders to this debate, let's just say that this debate regards whether and how the EU should recognize standards and specifications from certain fora and consortia based on a process evaluating the openness and transparency of such deliverables. The topic is complex, and somewhat confusing even to insiders, but nevertheless crucial to the European economy. As far as I can judge, their positions are not based on facts. This is unfortunate. For the benefit of clarity, here are some of the observations they make: a)"Most consortia are in essence driven by technology companies making hardware and software solutions, by definition very few of the largest ones are European-based". b) "Most consortia lack a European presence, relevant Committees, even those that are often cited as having stronger links with Europe, seem to lack an overall, inclusive set of participants". c) "Recognising specific consortia specifications will not resolve any concrete problems of interoperability for public authorities; interoperability depends on stringing together a range of specifications (from formal global bodies or consortia alike)". d) "Consortia already have the option to have their specifications adopted by the international formal standards bodies and many more exercise this than the two that seem to be campaigning for European recognition. Such specifications can then also be adopted as European standards." e) "Consortium specifications completely lack any process to take due and balanced account of requirements at national level - this is not important for technologies but can be a critical issue when discussing cross-border issues within the EU such as eGovernment, eHealth and so on". f) "The proposed recognition will not lead to standstill on national or European activities, nor to the adoption of the specifications as national standards in the CEN and CENELEC members (usually in their official national languages), nor to withdrawal of conflicting national standards. A big asset of the European standardization system is its coherence and lack of fragmentation." g) "We always miss concrete and specific examples of where consortia referencing are supposed to be helpful." First of all, note that ETSI, the third ESO, did not join the position. The reason is, of course, that ETSI beyond being an ESO, also has a global perspective and, moreover, does consider reality. Secondly, having produced arguments a) to g), CEN/CENELEC has the audacity to call a meeting on Friday 25 February entitled "ICT standardization - improving collaboration in Europe". This sounds very nice, but they have not set the stage for constructive debate. Rather, they demonstrate a striking lack of vision and lack of perspective. I will back this up by three facts, and leave it there. 1. Since the 1980s, global industry fora and consortia, such as IETF, W3C and OASIS have emerged as world-leading ICT standards development organizations with excellent procedures for openness and transparency in all phases of standards development, ex post and ex ante. - Practically no ICT system can be built without using fora and consortia standards (FCS). - Without using FCS, neither the Internet, upon which the EU economy depends, nor EU institutions would operate. - FCS are of high relevance for achieving and promoting interoperability and driving innovation. 2. FCS are complementary to the formally recognized standards organizations including the ESOs. - No work will be taken away from the ESOs should the EU recognize certain FCS. - Each FCS would be evaluated on its merit and on the openness of the process that produced it. ESOs would, with other stakeholders, have a say. - ESOs could potentially educate and assist European stakeholders to engage more actively and constructively with FCS. - ETSI, also an ESO, seems to clearly recognize these facts. 3. Europe and its Member States have a strong voice in several of the most relevant global industry fora and consortia. - W3C: W3C was founded in 1994 by an Englishman, Sir Tim Berners-Lee, in collaboration with CERN, the European research lab. In April 1995, INRIA (Institut National de Recherche en Informatique et Automatique) in France became the first European W3C host and in 2003, ERCIM (European Research Consortium in Informatics and Mathematics), also based in France, took over the role of European W3C host from INRIA. Today, W3C has 326 Members, 40% of which are European. Government participation is also strong, and it could be increased - a development that is very much desired by W3C. Current members of the W3C Advisory Board includes Ora Lassila (Nokia) and Charles McCathie Nevile (Opera). Nokia is Finnish company, Opera is a Norwegian company. SAP's Claus von Riegen is an alumni of the same Advisory Board. - OASIS: its membership - 30% of which is European - represents the marketplace, reflecting a balance of providers, user companies, government agencies, and non-profit organizations. In particular, about 15% of OASIS members are governments or universities. Frederick Hirsch from Nokia, Claus von Riegen from SAP AG and Charles-H. Schulz from Ars Aperta are on the Board of Directors. Nokia is a Finnish company, SAP is a German company and Ars Aperta is a French company. The Chairman of the Board is Peter Brown, who is an Independent Consultant, an Austrian citizen AND an official of the European Parliament currently on long-term leave. - IETF: The oversight of its activities is by the Internet Architecture Board (IAB), since 2007 chaired by Olaf Kolkman, a Dutch national who lives in Uithoorn, NL. Kolkman is director of NLnet Labs, a foundation chartered to develop open source software and open source standards for the Internet. Other IAB members include Marcelo Bagnulo whose affiliation is the University Carlos III of Madrid, Spain as well as Hannes Tschofenig from Nokia Siemens Networks. Nokia is a Finnish company. Siemens is a German company. Nokia Siemens is a European joint venture. - Member States: At least 17 European Member States have developed Interoperability Frameworks that include FCS, according to the EU-funded National Interoperability Framework Observatory (see list and NIFO web site on IDABC). This also means they actively procure solutions using FCS, reference FCS in their policies and even in laws. Member State reps are free to engage in FCS, and many do. It would be nice if the EU adjusted to this reality. - A huge number of European nationals work in the global IT industry, on European soil or elsewhere, whether in EU registered companies or not. CEN/CENELEC lacks perspective and has engaged in an effort to twist facts that is quite striking from a publicly funded organization. I wish them all possible success with Friday's meeting but I fear all of the most important stakeholders will not be at the table. Not because they do not wish to collaborate, but because they just have been insulted. If they do show up, it would be a gracious move, almost beyond comprehension. While I do not expect CEN/CENELEC to line up perfectly in favor of fora and consortia, I think it would be to their benefit to stick to more palatable observations. Actually, I would suggest an apology, straightening out the facts. This works among friends and it works in an organizational context. Then, we can all move on. Standardization is important. Too important to ignore. Too important to distort. The European economy depends on it. We need CEN/CENELEC. It is an important organization. But CEN/CENELEC needs fora and consortia, too.

  Read the article

• Refactoring Part 1 : Intuitive Investments

  - by Wes McClure

  Fear, it’s what turns maintaining applications into a nightmare.  Technology moves on, teams move on, someone is left to operate the application, what was green is now perceived brown.  Eventually the business will evolve and changes will need to be made.  The approach to those changes often dictates the long term viability of the application.  Fear of change, lack of passion and a lack of interest in understanding the domain often leads to a paranoia to do anything that doesn’t involve duct tape and bailing twine.  Don’t get me wrong, those have a place in the short term viability of a project but they don’t have a place in the long term.  Add to it “us versus them” in regards to the original team and those that maintain it, internal politics and other factors and you have a recipe for disaster.  This results in code that quickly becomes unmanageable.  Even the most clever of designs will eventually become sub optimal and debt will amount that exponentially makes changes difficult.  This is where refactoring comes in, and it’s something I’m very passionate about.  Refactoring is about improving the process whereby we make change, it’s an exponential investment in the process of change. Without it we will incur exponential complexity that halts productivity. Investments, especially in the long term, require intuition and reflection.  How can we tackle new development effectively via evolving the original design and paying off debt that has been incurred? The longer we wait to ask and answer this question, the more it will cost us.  Small requests don’t warrant big changes, but realizing when changes now will pay off in the long term, and especially in the short term, is valuable. I have done my fair share of maintaining applications and continuously refactoring as needed, but recently I’ve begun work on a project that hasn’t had much debt, if any, paid down in years.  This is the first in a series of blog posts to try to capture the process which is largely driven by intuition of smaller refactorings from other projects. Signs that refactoring could help: Testability How can decreasing test time not pay dividends? One of the first things I found was that a very important piece often takes 30+ minutes to test.  I can only imagine how much time this has cost historically, but more importantly the time it might cost in the coming weeks: I estimate at least 10-20 hours per person!  This is simply unacceptable for almost any situation.  As it turns out, about 6 hours of working with this part of the application and I was able to cut the time down to under 30 seconds!  In less than the lost time of one week, I was able to fix the problem for all future weeks! If we can’t test fast then we can’t change fast, nor with confidence. Code is used by end users and it’s also used by developers, consider your own needs in terms of the code base.  Adding logic to enable/disable features during testing can help decouple parts of an application and lead to massive improvements.  What exactly is so wrong about test code in real code?  Often, these become features for operators and sometimes end users.  If you cannot run an integration test within a test runner in your IDE, it’s time to refactor. Readability Are variables named meaningfully via a ubiquitous language? Is the code segmented functionally or behaviorally so as to minimize the complexity of any one area? Are aspects properly segmented to avoid confusion (security, logging, transactions, translations, dependency management etc) Is the code declarative (what) or imperative (how)?  What matters, not how.  LINQ is a great abstraction of the what, not how, of collection manipulation.  The Reactive framework is a great example of the what, not how, of managing streams of data. Are constants abstracted and named, or are they just inline? Do people constantly bitch about the code/design? If the code is hard to understand, it will be hard to change with confidence.  It’s a large undertaking if the original designers didn’t pay much attention to readability and as such will never be done to “completion.”  Make sure not to go over board, instead use this as you change an application, not in lieu of changes (like with testability). Complexity Simplicity will never be achieved, it’s highly subjective.  That said, a lot of code can be significantly simplified, tidy it up as you go.  Refactoring will often converge upon a simplification step after enough time, keep an eye out for this. Understandability In the process of changing code, one often gains a better understanding of it.  Refactoring code is a good way to learn how it works.  However, it’s usually best in combination with other reasons, in effect killing two birds with one stone.  Often this is done when readability is poor, in which case understandability is usually poor as well.  In the large undertaking we are making with this legacy application, we will be replacing it.  Therefore, understanding all of its features is important and this refactoring technique will come in very handy. Unused code How can deleting things not help? This is a freebie in refactoring, it’s very easy to detect with modern tools, especially in statically typed languages.  We have VCS for a reason, if in doubt, delete it out (ok that was cheesy)! If you don’t know where to start when refactoring, this is an excellent starting point! Duplication Do not pray and sacrifice to the anti-duplication gods, there are excellent examples where consolidated code is a horrible idea, usually with divergent domains.  That said, mediocre developers live by copy/paste.  Other times features converge and aren’t combined.  Tools for finding similar code are great in the example of copy/paste problems.  Knowledge of the domain helps identify convergent concepts that often lead to convergent solutions and will give intuition for where to look for conceptual repetition. 80/20 and the Boy Scouts It’s often said that 80% of the time 20% of the application is used most.  These tend to be the parts that are changed.  There are also parts of the code where 80% of the time is spent changing 20% (probably for all the refactoring smells above).  I focus on these areas any time I make a change and follow the philosophy of the Boy Scout in cleaning up more than I messed up.  If I spend 2 hours changing an application, in the 20%, I’ll always spend at least 15 minutes cleaning it or nearby areas. This gives a huge productivity edge on developers that don’t. Ironically after a short period of time the 20% shrinks enough that we don’t have to spend 80% of our time there and can move on to other areas.   Refactoring is highly subjective, never attempt to refactor to completion!  Learn to be comfortable with leaving one part of the application in a better state than others.  It’s an evolution, not a revolution.  These are some simple areas to look into when making changes and can help get one started in the process.  I’ve often found that refactoring is a convergent process towards simplicity that sometimes spans a few hours but often can lead to massive simplifications over the timespan of weeks and months of regular development.

  Read the article

• Book Review: Brownfield Application Development in .NET

  - by DotNetBlues

  I recently finished reading the book Brownfield Application Development in .NET by Kyle Baley and Donald Belcham.  The book is available from Manning.  First off, let me say that I'm a huge fan of Manning as a publisher.  I've found their books to be top-quality, over all.  As a Kindle owner, I also appreciate getting an ebook copy along with the dead tree copy.  I find ebooks to be much more convenient to read, but hard-copies are easier to reference. The book covers, surprisingly enough, working with brownfield applications.  Which is well and good, if that term has meaning to you.  It didn't for me.  Without retreading a chunk of the first chapter, the authors break code bases into three broad categories: greenfield, brownfield, and legacy.  Greenfield is, essentially, new development that hasn't had time to rust and is (hopefully) being approached with some discipline.  Legacy applications are those that are more or less stable and functional, that do not expect to see a lot of work done to them, and are more likely to be replaced than reworked. Brownfield code is the gray (brown?) area between the two and the authors argue, quite effectively, that it is the most likely state for an application to be in.  Brownfield code has, in some way, been allowed to tarnish around the edges and can be difficult to work with.  Although I hadn't realized it, most of the code I've worked on has been brownfield.  Sometimes, there's talk of scrapping and starting over.  Sometimes, the team dismisses increased discipline as ivory tower nonsense.  And, sometimes, I've been the ignorant culprit vexing my future self. The book is broken into two major sections, plus an introduction chapter and an appendix.  The first section covers what the authors refer to as "The Ecosystem" which consists of version control, build and integration, testing, metrics, and defect management.  The second section is on actually writing code for brownfield applications and discusses object-oriented principles, architecture, external dependencies, and, of course, how to deal with these when coming into an existing code base. The ecosystem section is just shy of 140 pages long and brings some real meat to the matter.  The focus on "pain points" immediately sets the tone as problem-solution, rather than academic.  The authors also approach some of the topics from a different angle than some essays I've read on similar topics.  For example, the chapter on automated testing is on just that -- automated testing.  It's all well and good to criticize a project as conflating integration tests with unit tests, but it really doesn't make anyone's life better.  The discussion on testing is more focused on the "right" level of testing for existing projects.  Sometimes, an integration test is the best you can do without gutting a section of functional code.  Even if you can sell other developers and/or management on doing so, it doesn't actually provide benefit to your customers to rewrite code that works.  This isn't to say the authors encourage sloppy coding.  Far from it.  Just that they point out the wisdom of ignoring the sleeping bear until after you deal with the snarling wolf. The other sections take a similarly real-world, workable approach to the pain points they address.  As the section moves from technical solutions like version control and continuous integration (CI) to the softer, process issues of metrics and defect tracking, the authors begin to gently suggest moving toward a zero defect count.  While that really sounds like an unreasonable goal for a lot of ongoing projects, it's quite apparent that the authors have first-hand experience with taming some gruesome projects.  The suggestions are grounded and workable, and the difficulty of some situations is explicitly acknowledged. I have to admit that I started getting bored by the end of the ecosystem section.  No matter how valuable I think a good project manager or business analyst is to a successful ALM, at the end of the day, I'm a gear-head.  Also, while I agreed with a lot of the ecosystem ideas, in theory, I didn't necessarily feel that a lot of the single-developer projects that I'm often involved in really needed that level of rigor.  It's only after reading the sidebars and commentary in the coding section that I had the context for the arguments made in favor of a strong ecosystem supporting the development process.  That isn't to say that I didn't support good product management -- indeed, I've probably pushed too hard, on occasion, for a strong ALM outside of just development.  This book gave me deeper insight into why some corners shouldn't be cut and how damaging certain sins of omission can be. The code section, though, kept me engaged for its entirety.  Many technical books can be used as reference material from day one.  The authors were clear, however, that this book is not one of these.  The first chapter of the section (chapter seven, over all) addresses object oriented (OO) practices.  I've read any number of definitions, discussions, and treatises on OO.  None of the chapter was new to me, but it was a good review, and I'm of the opinion that it's good to review the foundations of what you do, from time to time, so I didn't mind. The remainder of the book is really just about how to apply OOP to existing code -- and, just because all your code exists in classes does not mean that it's object oriented.  That topic has the potential to be extremely condescending, but the authors miraculously managed to never once make me feel like a dolt or that they were wagging their finger at me for my prior sins.  Instead, they continue the "pain points" and problem-solution presentation to give concrete examples of how to apply some pretty academic-sounding ideas.  That's a point worth emphasizing, as my experience with most OO discussions is that they stay in the academic realm.  This book gives some very, very good explanations of why things like the Liskov Substitution Principle exist and why a corporate programmer should even care.  Even if you know, with absolute certainty, that you'll never have to work on an existing code-base, I would recommend this book just for the clarity it provides on OOP. This book goes beyond just theory, or even real-world application.  It presents some methods for fixing problems that any developer can, and probably will, encounter in the wild.  First, the authors address refactoring application layers and internal dependencies.  Then, they take you through those layers from the UI to the data access layer and external dependencies.  Finally, they come full circle to tie it all back to the overall process.  By the time the book is done, you're left with a lot of ideas, but also a reasonable plan to begin to improve an existing project structure. Throughout the book, it's apparent that the authors have their own preferred methodology (TDD and domain-driven design), as well as some preferred tools.  The "Our .NET Toolbox" is something of a neon sign pointing to that latter point.  They do not beat the reader over the head with anything resembling a "One True Way" mentality.  Even for the most emphatic points, the tone is quite congenial and helpful.  With some of the near-theological divides that exist within the tech community, I found this to be one of the more remarkable characteristics of the book.  Although the authors favor tools that might be considered Alt.NET, there is no reason the advice and techniques given couldn't be quite successful in a pure Microsoft shop with Team Foundation Server.  For that matter, even though the book specifically addresses .NET, it could be applied to a Java and Oracle shop, as well.

  Read the article

• Linq to List and IEnumerable issues

  - by Otaku

  I am querying an HTML file with Linq. It looks something like this: <html> <body> <div class="Players"> <div class="role">Goalies</div> <div class="name">John Smith</div> <div class="name">Shawn Xie</div> <div class="role">Right Wings</div> <div class="name">Jack Davis</div> <div class="name">Carl Yuns</div> <div class="name">Wayne Gortonia</div> <div class="role">Centers</div> <div class="name">Lutz Gaspy</div> <div class="name">John Jacobs</div> </div </html> </body> What I'm trying to do is create a list of these folks like in a list of a structure called Players: Structure Players Public Name As String Public Position As String End Structure But I've quickly found out I don't really know what I'm doing when it comes to Linq. I've got this far my my queries: Dim goalieList = From d In player.Elements _ Where d.Value = "Goalies" _ Select From g In d.ElementsAfterSelf _ Take While (g.@class <> "role") _ Select New Players With {.Position = "Goalie", _ .Name = g.Value} Dim centersList = From d In player.Elements _ Where d.Value = "Centers" _ Select From g In d.ElementsAfterSelf _ Take While (g.@class <> "role") _ Select New Players With {.Position = "Centers", _ .Name = g.Value} Which gets me down to the the players by position, but then I can't do much with this afterwards the result type is System.Collections.Generic.IEnumerable(Of System.Collections.Generic.IEnumerable(Of Player)) What I want to do is add these two results to a new list, like: Dim playersList As List(Of Players) = Nothing playersList.AddRange(centersList) playersList.AddRange(goalieList) So that I can then query the list and use it. But it kicks the error: Unable to cast object of type 'WhereSelectEnumerableIterator2[System.Xml.Linq.XElement,System.Collections.Generic.IEnumerable1[Players]]' to type 'System.Collections.Generic.IEnumerable`1[Players]' As you can see, I may really have no idea how to work with all these objects/classes. Does anyone have any insight on what I may be doing wrong and how I can resolve it? RESOLVED: The Linq query needs to return a single iEnumerable, like this: Dim goalieList = From l In _ (From d In players.Elements _ Where d.Value = "Goalies" _ Select d.ElementsAfterSelf.TakeWhile(Function(f) f.@class <> "role")) _ Select New Players With {.Position = "Goalie", .Name = l.Value} and then use goalieList.ToList

  Read the article

• Mouse scroll not working in a scroll viewer with a wpf datagrid and additional UI elements

  - by paladugu457

  I am trying to figure out how to get the mouse scroll working on a wpf window with a scrollviewer and a datagrid within it. The WPF and C# code is below <ScrollViewer HorizontalScrollBarVisibility="Disabled" VerticalScrollBarVisibility="Auto"> <Grid> <Grid.RowDefinitions> <RowDefinition/> <RowDefinition/> </Grid.RowDefinitions> <Grid Grid.Row="0"> <Border Name="DataGridBorder" BorderThickness="2" Margin="1" CornerRadius="4" BorderBrush="#FF080757"> <dg:DataGrid AutoGenerateColumns="False" Name="ValuesDataGrid" BorderThickness="0" CanUserResizeColumns="True" FontWeight="Bold" HorizontalScrollBarVisibility="Auto" CanUserReorderColumns="False" IsReadOnly="True" IsTextSearchEnabled="True" AlternationCount="2" SelectionMode="Extended" GridLinesVisibility="All" HeadersVisibility="Column" CanUserAddRows="False" CanUserDeleteRows="False" CanUserResizeRows="False" CanUserSortColumns="False" RowDetailsVisibilityMode="Collapsed" SelectedIndex="0" RowStyle="{StaticResource CognitiDataGridRowStyle}" > <dg:DataGrid.Columns> <dg:DataGridTemplateColumn Header="Title" > <dg:DataGridTemplateColumn.CellTemplate> <DataTemplate> <StackPanel Orientation="Horizontal" > <TextBlock HorizontalAlignment="Left" VerticalAlignment="Center" Text="{Binding Path=Name}" FontWeight="Normal" /> </StackPanel> </DataTemplate> </dg:DataGridTemplateColumn.CellTemplate> </dg:DataGridTemplateColumn> </dg:DataGrid.Columns> </dg:DataGrid> </Border> </Grid> <Button Grid.Row="1" Height="90" >hello world</Button> </Grid> </ScrollViewer> and the C# code is as follows public partial class Window1 : Window { public Window1() { InitializeComponent(); initialize(); } public void initialize() { ObservableCollection<MyObject> testList = new ObservableCollection<MyObject>(); for (int i = 0; i < 20; i++) { MyObject my = new MyObject("jack " + i); testList.Add(my); } ValuesDataGrid.ItemsSource = testList; } } public class MyObject { public string Name { get; set; } public MyObject(string name) { Name = name; } } The problem i am facing is that when using the mouse to scroll, it works fine when it is over the button but as soon as i move the mouse pointer over the grid and try to scroll, nothing happens. I am able to move the scrollbar of the scrollviewer directly though. I am still a wpf novice so any help on how to get the mouse scroll to work over the datagrid would be appreciated. I am guessing there should be a pretty easy solution for this but I havent been able to figure it out

  Read the article

• How to interpolate hue values in HSV colour space?

  - by nick

  Hi, I'm trying to interpolate between two colours in HSV colour space to produce a smooth colour gradient. I'm using a linear interpolation, eg: h = (1 - p) * h1 + p * h2 s = (1 - p) * s1 + p * s2 v = (1 - p) * v1 + p * v2 (where p is the percentage, and h1, h2, s1, s2, v1, v2 are the hue, saturation and value components of the two colours) This produces a good result for s and v but not for h. As the hue component is an angle, the calculation needs to work out the shortest distance between h1 and h2 and then do the interpolation in the right direction (either clockwise or anti-clockwise). What formula or algorithm should I use? EDIT: By following Jack's suggestions I modified my JavaScript gradient function and it works well. For anyone interested, here's what I ended up with: // create gradient from yellow to red to black with 100 steps var gradient = hsbGradient(100, [{h:0.14, s:0.5, b:1}, {h:0, s:1, b:1}, {h:0, s:1, b:0}]); function hsbGradient(steps, colours) { var parts = colours.length - 1; var gradient = new Array(steps); var gradientIndex = 0; var partSteps = Math.floor(steps / parts); var remainder = steps - (partSteps * parts); for (var col = 0; col < parts; col++) { // get colours var c1 = colours[col], c2 = colours[col + 1]; // determine clockwise and counter-clockwise distance between hues var distCCW = (c1.h >= c2.h) ? c1.h - c2.h : 1 + c1.h - c2.h; distCW = (c1.h >= c2.h) ? 1 + c2.h - c1.h : c2.h - c1.h; // ensure we get the right number of steps by adding remainder to final part if (col == parts - 1) partSteps += remainder; // make gradient for this part for (var step = 0; step < partSteps; step ++) { var p = step / partSteps; // interpolate h var h = (distCW <= distCCW) ? c1.h + (distCW * p) : c1.h - (distCCW * p); if (h < 0) h = 1 + h; if (h > 1) h = h - 1; // interpolate s, b var s = (1 - p) * c1.s + p * c2.s; var b = (1 - p) * c1.b + p * c2.b; // add to gradient array gradient[gradientIndex] = {h:h, s:s, b:b}; gradientIndex ++; } } return gradient; }

  Read the article

• creating executable jar file for my java application

  - by Manu

  public class createExcel { public void write() throws IOException, WriteException { WorkbookSettings wbSettings = new WorkbookSettings(); wbSettings.setLocale(new Locale("en", "EN")); WritableWorkbook workbook1 =Workbook.createWorkbook(new File(file), wbSettings); workbook1.createSheet("Niru ", 0); WritableSheet excelSheet = workbook1.getSheet(0); createLabel(excelSheet); createContent(excelSheet,list); workbook1.write(); workbook1.close(); } public void createLabel(WritableSheet sheet)throws WriteException { WritableFont times10pt = new WritableFont(WritableFont.createFont("D:\font\trebuct"),8); // Define the cell format times = new WritableCellFormat(times10pt); // Lets automatically wrap the cells times.setWrap(false); WritableFont times10ptBoldUnderline = new WritableFont( WritableFont.createFont("D:\font\trebuct"), 9, WritableFont.BOLD, false, UnderlineStyle.NO_UNDERLINE); timesBoldUnderline = new WritableCellFormat(times10ptBoldUnderline); sheet.setColumnView(0,15); sheet.setColumnView(1,13); // Write a few headers addCaption(sheet, 0, 0, "Business Date"); addCaption(sheet, 1, 0, "Dealer ID"); } private void createContent(WritableSheet sheet, ArrayList list) throws WriteException,RowsExceededException { // Write a few number for (int i = 1; i < 11; i++) { for(int j=0;j<11;j++){ // First column addNumber(sheet, i, j,1); // Second column addNumber(sheet, 1, i, i * i); } } } private void addCaption(WritableSheet sheet, int column, int row, String s) throws RowsExceededException, WriteException { Label label; label = new Label(column, row, s, timesBoldUnderline); sheet.addCell(label); } private void addNumber(WritableSheet sheet, int row,int column, Integer integer) throws WriteException, RowsExceededException { Number number; number = new Number(column,row, integer, times); sheet.addCell(number); } public static void main(String[] args) { JButton myButton0 = new JButton("Advice_Report"); JButton myButton1 = new JButton("Position_Report"); JPanel bottomPanel = new JPanel(); bottomPanel.add(myButton0); bottomPanel.add(myButton1); myButton0.addActionListener(this); myButton1.addActionListener(this); createExcel obj=new createExcel(); obj.setOutputFile("c;\\temp\\swings\\jack.xls"); try{ obj.write(); }catch(Exception e){} } and so on. it working fine. i have jxl.jar and ojdbc14.jar files(need this jar file for Excelsheet creation and DB connection )and createExcel.class(.class file) file. how to make this code as executable jar file.

  Read the article

• Fread binary file dynamic size string [C]

  - by Blackbinary

  I've been working on this assignment, where I need to read in "records" and write them to a file, and then have the ability to read/find them later. On each run of the program, the user can decide to write a new record, or read an old record (either by Name or #) The file is binary, here is its definition: typedef struct{ char * name; char * address; short addressLength, nameLength; int phoneNumber; }employeeRecord; employeeRecord record; The way the program works, it will store the structure, then the name, then the address. Name and address are dynamically allocated, which is why it is necessary to read the structure first to find the size of the name and address, allocate memory for them, then read them into that memory. For debugging purposes I have two programs at the moment. I have my file writing program, and file reading. My actual problem is this, when I read a file I have written, i read in the structure, print out the phone # to make sure it works (which works fine), and then fread the name (now being able to use record.nameLength which reports the proper value too). Fread however, does not return a usable name, it returns blank. I see two problems, either I haven't written the name to the file correctly, or I haven't read it in correctly. Here is how i write to the file: where fp is the file pointer. record.name is a proper value, so is record.nameLength. Also i am writing the name including the null terminator. (e.g. 'Jack\0') fwrite(&record,sizeof record,1,fp); fwrite(record.name,sizeof(char),record.nameLength,fp); fwrite(record.address,sizeof(char),record.addressLength,fp); And i then close the file. here is how i read the file: fp = fopen("employeeRecord","r"); fread(&record,sizeof record,1,fp); printf("Number: %d\n",record.phoneNumber); char *nameString = malloc(sizeof(char)*record.nameLength); printf("\nName Length: %d",record.nameLength); fread(nameString,sizeof(char),record.nameLength,fp); printf("\nName: %s",nameString); Notice there is some debug stuff in there (name length and number, both of which are correct). So i know the file opened properly, and I can use the name length fine. Why then is my output blank, or a newline, or something like that? (The output is just Name: with nothing after it, and program finishes just fine) Thanks for the help.

  Read the article

• :contains for multiple words

  - by Emin

  I am using the following jQuery var etag='kate' if (etag.length > 0) { $('div').each(function () { $(this).find('ul:not(:contains(' + etag + '))').hide(); $(this).find('ul:contains(' + etag + ')').show(); }); }? towards the following HTML <div id="2"> <ul> <li>john</li> <li>jack</li> </ul> <ul> <li>kate</li> <li>clair</li> </ul> <ul> <li>hugo</li> <li>desmond</li> </ul> <ul> <li>said</li> <li>jacob</li> </ul> </div> <div id="3"> <ul> <li>jacob</li> <li>me</li> </ul> <ul> <li>desmond</li> <li>george</li> </ul> <ul> <li>allen</li> <li>kate</li> </ul> <ul> <li>salkldf</li> <li>3kl44</li> </ul> </div> basically, as long as etag has one word, the code works perfectly and hides those elements who do not contain etag. My problem is, when etag is multiple words (and I don't have control over it. Its coming from a database and could be combination of multiple words seperated with space char) then the code does not work.. is there any way to achieve this?

  Read the article

• onListItemClick with Mulitple Value/Retrieving Value

  - by JuniorFlip

  Hello, I am trying to retrieve the value from a Arraylist/ArrayAdapter that I have populated. I believe my issue is at the Onitemclick event. What I would like to accomplished is that when I click on Yasmin, I can return the value of 8. Please let me know if I am on the right track import java.util.ArrayList; import android.app.Activity; import android.os.Bundle; import android.view.View; import android.widget.AdapterView; import android.widget.ArrayAdapter; import android.widget.ListView; import android.widget.TextView; import android.widget.AdapterView.OnItemClickListener; public class lister extends Activity { /** Called when the activity is first created. */ TextView txHomeTeam; protected ListView mFavlist; protected ArrayList fakeFavs = new ArrayList(); @Override public void onCreate(Bundle icicle) { super.onCreate(icicle); this.setContentView(R.layout.main); this.txHomeTeam = (TextView)this.findViewById(R.id.title); fakeFavs.add(new Favorite("John", "1")); fakeFavs.add(new Favorite("Yasmin", "8")); fakeFavs.add(new Favorite("Jack", "10")); //this.mFavlist = (ListView) this.findViewById(R.id.list_favorites); this.mFavlist = (ListView) this.findViewById(R.id.list_favorites); initListView(); mFavlist.setTextFilterEnabled(true); mFavlist.setOnItemClickListener(new OnItemClickListener() { @Override public void onItemClick(AdapterView arg0, View view, int position, long id) { // user clicked a list item, //and read the value from <Favorite>.value //txHomeTeam.setText=???? } }); } public void refreshFavListItems() { mFavlist.setAdapter(new ArrayAdapter(this, android.R.layout.simple_list_item_1, fakeFavs)); } public void initListView() { /* Loads the items to the ListView. */ refreshFavListItems(); } protected class Favorite { protected String Detail; protected String value; protected Favorite(String Detail, String value) { this.Detail = Detail; this.value = value; } public String toString() { return Detail; } } }

  Read the article

• Why does the following Java Script fail to load XML?

  - by Pavitar

  I have taken an example taught to us in class,wherein a javascript is used to retrieve data from the XML,but it doesn't work.Please help I have also added the XML file below. <html> <head> <title>Customer Info</title> <script language="javascript"> var xmlDoc = 0; var xmlObj = 0; function loadCustomers(){ xmlDoc = new ActiveXObject("Microsoft.XMLDOM"); xmlDoc.async = "false"; xmlDoc.onreadystatechange = displayCustomers; xmlDoc.load("customers.xml"); } function displayCustomers(){ if(xmlDoc.readyState == 4){ xmlObj = xmlDoc.documentElement; var len = xmlObj.childNodes.length; for(i = 0; i < len; i++){ var nodeElement = xmlObj.childNodes[i]; document.write(nodeElement.attributes[0].value); for(j = 0; j < nodeElement.childNodes.length; j++){ document.write(" " + nodeElement.childNodes[j].firstChild.nodeValue); } document.write("<br/>"); } } } </script> </head> <body> <form> <input type="button" value="Load XML" onClick="loadCustomers()"> </form> </body> </html> XML(customers.xml) <?xml version="1.0" encoding="UTF-8"?> <customers> <customer custid="CU101"> <pwd>PW101</pwd> <email>[email protected]</email> </customer> <customer custid="CU102"> <pwd>PW102</pwd> <email>[email protected]</email> </customer> <customer custid="CU103"> <pwd>PW103</pwd> <email>[email protected]</email> </customer> <customer custid="CU104"> <pwd>PW104</pwd> <email>[email protected]</email> </customer> </customers>

  Read the article

• Learn C# now or finish up with Java and then learn C#?

  - by Sahat

  Ok here is my situation. I've studied Java in my college for 2 semesters. But you know they teach you jack in there, just the basics. We skipped half of our textbook and even then our professors don't teach from section to section of each chapter. I don't blame them. It's hard as it is for new students to understand even the basic concepts of programming. Now this is a community college we are talking about and not Stanford, MIT or Berkeley. So like I said I've done 2 semester of Java. I really like our textbook because it has some challenging projects to do at the end of each chapter. This textbook is pretty clear and i have no problem understanding it (although 2-D and 3-D Arrays have given me some trouble). I have tried reading a few C# books such as Pro C# 2008 and .NET 3.5 and C# 4.0 in a Nutshell. I found these books to be dry and overloaded with information that put me to sleep (No offense to the authors of those 2 wonderful, according to amazon ratings, books). Would you suggest I finish my Java textbook, brush up my knowledge of Arrays, Polymorphism, and etc that are universal to most programming languages. And then switch to C#, plus the syntax is very similar so it should be easy to switch. Or should I just start learning C# right now from the very beginning? If it's the latter then could you recommend some free online resources that will keep me engaged and at the same time teach me everything I need to know about C#. Someone has recommended me to learn .NET first, but I found it to be not the brightest idea. .NET is just a big monster full of libraries. How am I going to apply it if I don't even know the C# or VB!? Anyway back to my question: Master Java and switch to C# or just go with C#? DISCLAIMER: I don't want to start .NET vs J2EE or C# vs Java flame war. I am going with C#. I've decided that I want to work in a Microsoft shop in the future. .NET is what I want to learn. Thanks! Will be waiting for the answers.

  Read the article

• My form submit button is not showing correctly

  - by JackR

  I have created an form that submits the contents to email. I have used the exact same coding in many other websites, but for my new website http://www.peterevansfuneraldirectors.co.uk/contact-us.html the submit button is just a grey square with text, rather than the usual button. Also the hand doesn't come up on hover. My form code is... <form action="php/FormToEmail.php" method="post" name="ContactForm" id="ContactForm" onsubmit="MM_validateForm('name','','R','email','','RisEmail','message subject','','R','message','','R');return document.MM_returnValue" > <div class="form-text"> <b>Name<span class="purple">*</span></b><br /> <input name="name" type="text" id="name" size="35" style="height:23px; background-color:#FFF; color:#000; border: 1px solid #CCC;" /> </div><br /> <div class="form-text"> <b>Email<span class="purple">*</span></b><br /> <input name="email" type="text" id="email" size="35" style="height:23px; background-color:#FFF; color:#000; border: 1px solid #CCC;" /> </div><br /> <div class="form-text"> <b>Message Subject<span class="purple">*</span></b><br /> <input name="message subject" type="text" id="message subject" size="35" style="height:23px; background-color:#FFF; color:#000; border: 1px solid #CCC;" /> </div><br /> <div class="form-text"> <b>Message<span class="purple">*</span></b><br /> <textarea name="message" type="text" id="message" rows="8" cols="55" style="background-color:#FFF; color:#000; border: 1px solid #CCC;" ></textarea> </div><br /> <div class="submit-button"> <input type="submit" name="submit" value="Submit" /> </div> </form> Thanks in advance! Jack.

  Read the article

• extracting multiple tags from xml using PHP

  - by user1479431

  Here is my address.xml <?xml version="1.0" ?> <!--Sample XML document --> <AddressBook> <Addressentry> <firstName>jack</firstName> <lastName>S</lastName> <Address>2899,Ray Road</Address> <Email>[email protected]</Email> </Addressentry> <Addressentry> <firstName>Sid</firstName> <lastName>K</lastName> <Address>238,Baseline Road,TX</Address> <Email>[email protected]</Email> <Email>[email protected]</Email> </Addressentry> <Addressentry> <firstName>Satya</firstName> <lastName>Yar</lastName> <Address>6,Rural Road,Tempe,AZ</Address> <Email>[email protected]</Email> <Email>[email protected]</Email> <Email>[email protected]</Email> </Addressentry> </AddressBook> I am trying to load all the entries using PHP code as below. Each addressentry can have one or more tags. Right now from the code below I am able to extract only one tag. My question is how do I extract all tags associated with particular Addressentry. that is I want to print all emails on the same line. <?php $theData = simplexml_load_File("address.xml"); foreach($theData->Addressentry as $theAddress) { $theFirstName = $theAddress->firstName; $theLastName = $theAddress->lastName; $theAdd = $theAddress->Address; echo "<p>".$theFirstName." ".$theLastName."<br/> ".$theAdd."<br/> ".$theAddress->Email."<br/> </p>"; unset($theFirstName); unset($theLastName); unset($theAdd); unset($theEmail); } ?> Any help would be appreciated

  Read the article

• How to use BCDEdit to dual boot Windows installations?

  - by Ian Boyd

  What are the bcdedit commands necessary to setup dual boot between different installations of Windows?5 Background i recently installed Windows 8 onto a separate hard drive1. Now that Windows 8 in installed i want to dual-boot back to Windows 7. i have my two2 hard drives: So you can see that i have my two disks, with the partitions containing Windows: Windows 7: \\PhysicalDisk0 (partition 03) Windows 8: \\PhysicalDisk2 (partition 1) What i'm trying to figure out how is how to use bcdedit to instruct the thing that boots Windows that there is another Windows installation out there. Running bcdedit now, it shows current configuration: C:\WINDOWS\system32>bcdedit Windows Boot Manager -------------------- identifier {bootmgr} device partition=\Device\HarddiskVolume2 description Windows Boot Manager locale en-US inherit {globalsettings} integrityservices Enable default {current} resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Windows Boot Loader ------------------- identifier {current} device partition=C: path \WINDOWS\system32\winload.exe description Windows 8 locale en-US inherit {bootloadersettings} recoverysequence {ce153eb9-3786-11e2-87c0-e740e123299f} integrityservices Enable recoveryenabled Yes allowedinmemorysettings 0x15000075 osdevice partition=C: systemroot \WINDOWS resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} nx OptIn bootmenupolicy Standard hypervisorlaunchtype Auto i cannot find any documentation on the difference between Windows Boot Manager and Windows Boot Loader. Documentation There is some documentation on Bcdedit: Technet: Command Line Reference - Bcdedit Technet: Windows Automated Installation Kit - BCDEdit Command Line Options Whitepaper - BCDEdit Commands for Boot Environment (Word Document) But they don't explain how edit the binary boot configuration data If i had to guess, i would think that a Windows Boot Manager instructs the BIOS what program it should run. That program would give the user a set of boot choices. That leaves Windows Boot Loader do be a particular boot choice, that represents a particular installation of Windows. If that is the case i would need to create a new Windows Boot Loader entry. This means i might want to use the /create parameter: /create Creates a new boot entry: bcdedit [/store filename] /create [id] /d description [/application apptype | /inherit [apptype] | /inherit DEVICE | /device] So i assume a syntax of: >bcdedit /create /d "The old Windows 7" /application osloader Where application can be one of the following types: Apptype Description BOOTSECTOR The boot sector application OSLOADER The Windows boot loader RESUME A resume application Unfortunately, the only documentation about osloader is "The Windows boot loader". i don't see how that can differentiate between Windows 8 on one hard drive, and Windows 7 on another. The other possible parameter when /create a boot loader is >bcdedit /create /D "Windows Vista" /device "The Quick Brown Fox" Unfortunately the documentation is missing for /device: /device Optional. If id is not set to a well-known identifier, the option that is used to specify the new boot entry as an additional device options entry. Since i did not set id to a well-known identifier, i must set /device to "the option that is used to specify the new boot entry as an additional device options entry". i know all those words; they're all English. But i have on idea what it is saying; those words in that order seem nonsensical. So i'm somewhat stymied. i don't want to be like Dan Stolts from Microsoft: I found no content that was particularly helpful when I hosed my machine by playing with BCDEdit. This post would have been ok if there was much more detail especially on the /set command OSDevice, etc. So once I got my machine fixed, I documented the solution and the information is here.... i mean, if a Microsoft guy can't even figure out how to use BCDEdit to edit his BCD, then what chance to i have? Bonus Reading BCDEdit Command-Line Options Bcdedit Server 2008 R2 or Windows 7 System Will NOT Boot After Making Changes To Boot Manager Using BCDEdit Visual BCD Editor4 Windows 7 and Windows 8 RTM Dual Boot Setup Footnotes 1 Since the Windows 8 installer would have damaged my Windows 7 install, i decided to unplug my "main" hard drive during the install. Which is a long-winded explanation of why the Windows 8 installer didn't detect the existing Windows 7 install. Normally the installer would have automatically created the required entries for dual-boot. Not that the reason i'm asking the question is important. 2 Really there's three drives, but the third is just bulk storage. The existence of a 3rd hard drive is irrelevant to the question. i only mention it in case someone wants to know why the screenshot has 3 hard drives when i only mention two. 3 i arbitrarily started numbering partitions at "zero"; not to imply that partitions are numbered starting at zero. i only mention partitions because i don't see how any boot-loader could do its job without knowing which partition, and which folder, an installation of Windows is located in. 4 i'm asking about BCDEdit. i tried Visual BCD Editor. It seems to be a visual BCD editor. That is to say that it's a GUI, but still uses the same terminology as BCDEdit, and requires the same knowledge that BCD doesn't document. 5 For simplicity sake we'll assume that all installation of Windows i want to dual-boot between are Windows Vista or later, making them all compatible with the BCDEdit and the binary boot loader. The alternative would require delving into the intricacies of the old ntloader. Nor am i asking about dual booting to Linux; or how to boot to a Virtual Hard Drive (vhd) image. Just modern versions of Windows on existing hard drives in the same machine. Note: You can ignore everything after the word Background. It's all pointless exposition to satisfy some people's need for "research effort" before they'll consider being helpful. Some people have even been known to summarily close questions unless there is research effort. Some people have been know to close questions if there is too much research effort. Some people close questions when i put the note saying that they can ignore everything after the Background out of spite. Some people are just grumpy.

  Read the article

• Bypass BIOS password set by faulty Toshiba firmware on Satellite A55 laptop?

  - by Brian

  How can the CMOS be cleared on the Toshiba Satellite A55-S1065? I have this 7 year old laptop that has been crippled by a glitch in its BIOS: 'A "Password =" prompt may be displayed when the computer is turned on, even though no power-on password has been set. If this happens, there is no password that will satisfy the password request. The computer will be unusable until this problem is resolved. [..] The occurrence of this problem on any particular computer is unpredictable -- it may never happen, but it could happen any time that the computer is turned on. [..] Toshiba will cover the cost of this repair under warranty until Dec 31, 2010.' -Toshiba As they stated, this machine is "unusable." The escape key does not bypass the prompt (nor does any other key), thus no operating system can be booted and no firmware updates can be installed. After doing some research, I found solutions that have been suggested for various Toshiba Satellite models afflicted by this glitch: "Make arrangements with a Toshiba Authorized Service Provider to have this problem resolved." -Toshiba (same link). Even prior to the expiration of Toshiba's support ("repair under warranty until Dec 31, 2010"), there have been reports that this solution is prohibitively expensive, labor charges accruing even when the laptop is still under warranty, and other reports that are generally discouraging: "They were unable to fix it and the guy who worked on it said he couldn’t find the jumpers on the motherboard to clear the BIOS. I paid $39 for my troubles and still have the password problem." - Steve. Since the costs of the repairs can now exceed the value of the hardware, it would seem this is a DIY solution, or a non-solution (i.e. the hardware is trash). Build a Toshiba parallel loopback by stripping and soldering the wires on a DB25 plug to connect connect these pins: 1-5-10, 2-11, 3-17, 4-12, 6-16, 7-13, 8-14, 9-15, 18-25. -CGSecurity. According to a list of supported models on pwcrack, this will likely not work for my Satellite A55-1065 (as well as many other models of similar age). -pwcrack Disconnect the laptop battery for an extended period of time. Doesn't work, laptop sat in a closet for several years without the battery connected and I forgot about the whole thing for awhile. The poor thing. Clear CMOS by setting the proper jumper setting or by removing the CMOS (RTC) battery, or by short circuiting a (hidden?) jumper that looks like a pair of solder marks -various sources for various Satellite models: Satellite A105: "you will see C88 clearly labeled right next the jack that the wireless card plugs into. There are two little solder squares (approx 1/16") at this location" -kerneltrap Satellite 1800: "Underneath the RAM there is black sticker, peel off the black sticker and you will reveal two little solder marks which are actually 'jumpers'. Very carefully hold a flat-head screwdriver touching both points and power on the unit briefly, effectively 'shorting' this circuit." -shadowfax2020 Satellite L300: "Short the B500 solder pads on the system board." -Lester Escobar Satellite A215: "Short the B500 solder pads on the system board." -fixya Clearing the CMOS could resolve the issue, but I cannot locate a jumper or a battery on this board. Nothing that looks remotely like a battery can be removed (everything is soldered). I have looked closely at the area around the memory and do not see any obvious solder pads that could be a secret jumper. Here are pictures (click for full resolution) : Where is the jumper (or solder pads) to short circuit and wipe the CMOS on this board? Possibly related questions: Remove Toshiba laptop BIOS password? Password Problem Toshiba Satellite..

  Read the article

• Play music on iPhone through computer

  - by Kyle Cronin

  Now that I've had my iPhone for a few months, I'm trying an experiment to see if I can't replace the laptop I carry around with my iPhone + internet connected computer. To this end, I've been trying to find a program that will let me play the music on my iPhone through the hardware and software on the host computer. If I recall correctly this was possible a few years ago with the iPod - Linux software like Rhythmbox and Banshee was able to read the music off an iPod and play it through the speakers. I even thought I recalled iTunes itself being capable of this at one time. Now, however, iTunes greys out/disables the music on my iPhone and I can't find any documented support for the iPhone in any other music program. Is this really no longer possible? Am I limited to using the headphone jack to get music to play? (note: I am using an iPhone 3G with the 3.0 software. I am attempting to play music on computers other than the one I sync with) Several replies mention that I should check "manually manage" to do this. I just tried this on a computer that I don't sync my iPhone to and it asked me to erase and sync, which is obviously something I don't want to do. update: OK, I checked the "Manually manage music and videos" box on a computer that I didn't sync to (now known as "Computer A"), and it told me that I needed to erase & sync to cause the changes to have effect, so I did. At this point I'm guessing that my iPhone thinks that it's syncing with that computer. I copied over a few songs using the autofill feature. At this point, Computer A sees the maybe 10 or so songs I've copied using autofill. I then plug my iPhone into my Macbook ("Computer B") which I've been syncing with. At this point, I'm pretty sure that it still thought that all my synced content was still on my iPhone. The "manually manage music and videos" checkbox isn't checked, so I check it and go through a similar process where iTunes erases the synced content and I copy over a playlist. At this point, there's no trace of the songs that I copied over from Computer A. So I plug my iPhone into Computer A - in the Music section are the handful of songs that I had copied over earlier, greyed out and unplayable. To make sure that this wasn't some sort of caching issue, I plugged my iPhone into my sister's Macbook ("Computer C") and it lists the same few, greyed out songs that I had copied over from Computer A. Plugging into Computer B doesn't reveal these songs at all, only the songs that it copied over (these are playable). A few things: This inconsistent behavior is driving me insane. Why would my iPhone report two versions of its contents to different computers? Is there a way to get a computer to completely forget about an iPhone and just resync everything to get everything into a consistent state? Even if I get the phone into a consistent state, I still can't play the files on my phone anywhere but the computer I sync with, which was my original goal. What am I doing wrong? maybe I should read the fine print before I mess with my iPhone So going over this thread with a fine-toothed comb again yields this lovely tidbit in the Apple docs: Note: Even when manually managing, some content may only be available from one library at time. This includes all content on iPhone and video content on iPods. OK, so manually managing is a dead end on the iPhone. Are there any other options? Any unofficial third-party programs or drivers that will work?

  Read the article

• set proxy in apache for XMPP chat

  - by Hunt

  I want to setup a proxy settings in Apache to use Facebook XMPP Chat So far I have setup ejabber server and I am able to access xmpp service using http://mydomain.com:5280/xmpp-http-bind I am able to create Jabber Account too. Now as I want to integrate Facebook XMPP chat , I want my server to sit in between client and chat.facebook.com because I want to implement Facebook chat and custom chat too. So I have read this article and come to know that I need to serve BOSH Service as a proxy in apache to access Facebook Chat service. So I don't know how to set up a proxy in a apache httpd.conf as I have tried following <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind ProxyPassReverse /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind But whenever I request http://www.mydomain.com:5280/xmpp-http-bind from strophe.js I am getting following response from server <body type='terminate' condition='internal-server-error' xmlns='http://jabber.org/protocol/httpbind'> BOSH module not started </body> and server log says following E(<0.567.0:ejabberd_http_bind:1239) : You are trying to use BOSH (HTTP Bind) in host "chat.facebook.com", but the module mod_http_bind is not started in that host. Configure your BOSH client to connect to the correct host, or add your desired host to the configuration, or check your 'modules' section in your ejabberd configuration file. here is my existing settings of ejabberd.cfg , but still no luck {5280, ejabberd_http, [ {access,all}, {request_handlers, [ {["pub", "archive"], mod_http_fileserver}, {["xmpp-http-bind"], mod_http_bind} ]}, captcha, http_bind, http_poll, register, web_admin ]} ]}. in a module section {mod_http_bind, [{max_inactivity, 120}]}, and whenever i fire http://www.mydomain.com:5280/xmpp-http-bind url independently am getting following message ejabberd mod_http_bind An implementation of XMPP over BOSH (XEP-0206) This web page is only informative. To use HTTP-Bind you need a Jabber/XMPP client that supports it. I have added chat.facebook.com in a list of host in ejabber.cfg as follows {hosts, ["localhost","mydomain.com","chat.facebook.com"]} and now i am getting following response <body xmlns='http://jabber.org/protocol/httpbind' sid='710da2568460512eeb546545a65980c2704d9a27' wait='300' requests='2' inactivity='120' maxpause='120' polling='2' ver='1.8' from='chat.facebook.com' secure='true' authid='1917430584' xmlns:xmpp='urn:xmpp:xbosh' xmlns:stream='http://etherx.jabber.org/streams' xmpp:version='1.0'> <stream:features xmlns:stream='http://etherx.jabber.org/streams'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>DIGEST-MD5</mechanism> <mechanism>PLAIN</mechanism> </mechanisms> <c xmlns='http://jabber.org/protocol/caps' hash='sha-1' node='http://www.process-one.net/en/ejabberd/' ver='yy7di5kE0syuCXOQTXNBTclpNTo='/> <register xmlns='http://jabber.org/features/iq-register'/> </stream:features> </body> if i use valid BOSH service created my jack moffit http://bosh.metajack.im:5280/xmpp-httpbind then i am getting following valid XML from facebook , but from my server i am not getting this <body xmlns='http://jabber.org/protocol/httpbind' inactivity='60' secure='true' authid='B8732AA1' content='text/xml; charset=utf-8' window='3' polling='15' sid='928073b02da55d34eb3c3464b4a40a37' requests='2' wait='300'> <stream:features xmlns:stream='http://etherx.jabber.org/streams' xmlns='jabber:client'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>X-FACEBOOK-PLATFORM</mechanism> <mechanism>DIGEST-MD5</mechanism> </mechanisms> </stream:features> </body> Can anyone please help me to resolve the issue

  Read the article

• Adding sections to a plist for Xcode for use in Cocoa touch Table View

  - by Steve

  I am a beginning iPhone SDK programmer. I built a simple practice application I am trying to use to learn more about table views. It's an app that loads football teams from a plist and displays them in a table view with their stadium name and logo. Tapping the team goes to a detail view for that team. I am trying to understand how to add sections to this, so that I might have a couple of teams in one section and others in another section, etc. I would assume I need to both re-structure my plist and change the code to read arrays from the different levels of the plist? To begin, I had a plist with the root array consisting of 3 dictionaries, one for each team. Each dictionary had 3 keys, "name" "stadium" and "logo". This works fine. I am loading it via: NSString *path = [[NSBundle mainBundle] pathForResource:@"teams" ofType:@"plist"]; teams = [[NSMutableArray alloc] initWithContentsOfFile:path]; and then // Configure the cell. NSDictionary *team = [teams objectAtIndex:indexPath.row]; cell.textLabel.text = [team objectForKey:@"name"]; NSString *imgPath = [team valueForKey:@"logo"]; cell.imageView.image = [UIImage imageNamed:imgPath]; cell.detailTextLabel.text =[team objectForKey:@"stadium"]; return cell; No problem. But now I wanted the sections, so I changed my plist to: <array> <dict> <key>teams 1</key> <array> <dict> <key>name</key> <string>Packers</string> <key>stadium</key> <string>Lambeau Field</string> <key>logo</key> <string>packers.jpg</string> </dict> <dict> <key>name</key> <string>Jets</string> <key>stadium</key> <string>Giants Stadium</string> <key>logo</key> <string>jets_logo.jpg</string> </dict> </array> </dict> <dict> <key>teams 2</key> <array> <dict> <key>name</key> <string>Cincinnati Bengals</string> <key>stadium</key> <string>Paul Brown Stadium</string> <key>logo</key> <string>bengals.jpg</string> </dict> </array> </dict> And I am unsure how to modify the viewDidLoad to assign the sections to one NSArray and the teams "level" to another array.

  Read the article

• Error in python - don't understand

  - by Jasper

  Hi, I'm creating a game, and am quite new to Python generally. I created a function 'descriptionGenerator()' which generates a description for characters and objects either randomly or using variables passed to it. It seemed to be working, but every now and then it wouldn't work correctly. So i placed it in a loop, and it never seems to be able to complete the loop without one of the iterations having this problem. The code is as follows: #+------------------------------------------+ #| Name: bitsandpieces.py | #| A module for the 'Europa I' game | #| created for the Game Making Competition | #| | #| Date Created/Modified: | #| 3/4/10 | 3/4/10 | #+------------------------------------------+ # Import the required modules # Import system modules: import time import random # Import 3rd party modules: # Import game modules: # Define the 'descriptionGenerator()' function def descriptionGenerator(descriptionVariables): descriptionVariableSize = len(descriptionVariables) if descriptionVariables[0] == 'char': # If there is only one variable ('char'), create a random description if descriptionVariableSize == 1: # Define choices for descriptionVariables to be generated from gender_choices = ['male', 'female'] hair_choices = ['black', 'red', 'blonde', 'grey', 'brown', 'blue'] hair_choices2 = ['long', 'short', 'cropped', 'curly'] size_choices = ['tubby', 'thin', 'fat', 'almost twig-like'] demeanour_choices = ['glowering', 'bright', 'smiling', 'sombre', 'intelligent'] impression_choices = ['likeable', 'unlikeable', 'dangerous', 'annoying', 'afraid'] # Define description variables gender = random.choice(gender_choices) height = str(float('0.' + str(random.randint(1, 9))) + float(random.randint(1, 2))) if float(height) > 1.8: height_string = 'tall' if float(height) > 2: height_string = 'very tall' elif float(height) < 1.8 and float(height) > 1.5: height_string = 'average' elif float(height) < 1.5: height_string = 'short' if float(height) < 1.3: height_string = 'very short' hair = random.choice(hair_choices2) + ' ' + random.choice(hair_choices) size = random.choice(size_choices) demeanour = random.choice(demeanour_choices) impression = random.choice(impression_choices) # Collect description variables in list 'randomDescriptionVariables' randomDescriptionVariables = ['char', gender, height, height_string, hair, size, demeanour, impression] # Generate description using the 'descriptionGenerator' function descriptionGenerator(randomDescriptionVariables) # Generate the description of a character using the variables passed to the function elif descriptionVariableSize == 8: if descriptionVariables[1] == 'male': if descriptionVariables[7] != 'afraid': print """A %s man, about %s m tall. He has %s hair and is %s. He is %s and you get the impression that he is %s.""" %(descriptionVariables[3], descriptionVariables[2], descriptionVariables[4], descriptionVariables[5], descriptionVariables[6], descriptionVariables[7]) elif descriptionVariables[7] == 'afraid': print """A %s man, about %s m tall. He has %s hair and is %s. He is %s.\nYou feel that you should be %s of him.""" %(descriptionVariables[3], descriptionVariables[2], descriptionVariables[4], descriptionVariables[5], descriptionVariables[6], descriptionVariables[7]) elif descriptionVariables[1] == 'female': if descriptionVariables[7] != 'afraid': print """A %s woman, about %s m tall. She has %s hair and is %s. She is %s and you get the impression that she is %s.""" %(descriptionVariables[3], descriptionVariables[2], descriptionVariables[4], descriptionVariables[5], descriptionVariables[6], descriptionVariables[7]) elif descriptionVariables[7] == 'afraid': print """A %s woman, about %s m tall. She has %s hair and is %s. She is %s.\nYou feel that you should be %s of her.""" %(descriptionVariables[3], descriptionVariables[2], descriptionVariables[4], descriptionVariables[5], descriptionVariables[6], descriptionVariables[7]) else: pass elif descriptionVariables[0] == 'obj': # Insert code here 2 deal with object stuff pass print print myDescriptionVariables = ['char'] i = 0 while i < 30: print print print descriptionGenerator(myDescriptionVariables) i = i + 1 time.sleep(10) When it fails to properly execute it says this: Traceback (most recent call last): File "/Users/Jasper/Development/Programming/MyProjects/Game Making Challenge/Europa I/Code/Code 2.0/bitsandpieces.py", line 79, in <module> descriptionGenerator(myDescriptionVariables) File "/Users/Jasper/Development/Programming/MyProjects/Game Making Challenge/Europa I/Code/Code 2.0/bitsandpieces.py", line 50, in descriptionGenerator randomDescriptionVariables = ['char', gender, height, height_string, hair, size, demeanour, impression] UnboundLocalError: local variable 'height_string' referenced before assignment Thanks for any help with this

  Read the article

• If 'Architect' is a dirty word - what's the alternative; when not everyone can actually design a goo

  - by Andras Zoltan

  Now - I'm a developer first and foremost; but whenever I sit down to work on a big project with lots of interlinking components and areas, I will forward-plan my interfaces, base classes etc as best I can - putting on my Architect hat. For a few weeks I've been doing this for a huge project - designing whole swathes of interfaces etc for a business-wide platform that we're developing. The basic structure is a couple of big projects that consists of service and data interfaces, with some basic implementations of all of these. On their own, these assemblies are useless though, as they are simply intended intended as a scaffold on which to build a business-specific implementation (we have a lot of businesses). Therefore, the design of the core platform is absolutely crucial, since consumers of the system are not intended to know which implementation they are actually using. In the past it's not worked so well, but after a few proof-of-concepts and R&D projects this new platform is now growing nicely and is already proving itself. Then somebody else gets involved in the project - he's a TDD man who sees code-level architecture as an irrelevance and is definitely from the camp that 'architect' is a dirty word - I should add that our working relationship is very good despite this :) He's open about the fact that he can't architect in advance and obviously TDD really helps him because it allows him to evolve his systems over time. That I get, and totally understand; but it means that his coding style, basically, doesn't seem to be able to honour the architecture that I've been putting in place. Now don't get me wrong - he's an awesome coder; but the other day he needed to extend one of his components (an implementation of a core interface) to bring in an extra implementation-specific dependency; and in doing so he extended the core interface as well as his implementation (he uses ReSharper), thus breaking the independence of the whole interface. When I pointed out his error to him, he was dismayed. Being test-first, all that mattered to him was that he'd made his tests pass, and just said 'well, I need that dependency, so can't we put it in?'. Of course we could put it in, but I was frustrated that he couldn't see that refactoring the generic interface to incorporate an implementation-specific feature was just wrong! But it is all very Charlie Brown to him (you know the sound the adults make when they're talking to the children) - as far as he's concerned we don't need to worry about it because we can always refactor. The problem is, the culture of test-write-refactor is all very well and good - but not when you're dealing with a platform that is going to be shared out among so many projects that you could never get them all in one place to make the refactorings work. In my opinion, sometimes you actually have to think about what you're doing, and not just let nature take its course. Am I simply fulfilling the role of Architect as a dirty word here? I believe that architecture is important and should be thought about before code gets written; unless it's a particularly small project. But when you're working in a team of people who don't think that way, or even can't think that way how can you actually get this across? Is it a case of simply making the architecture off-limits to changes by other people? I don't want to start having bloody committees just to be able to grow the system; but equally I don't want to be the only one responsible for it all. Do you think the architect role is a waste of time? Is it at odds with TDD and other practises? Can this mix of different practises be made to work, or should I just be a lot less precious (and in so doing allow a generic platform become useless!)? Or do I just lay down the law? Any ideas/experiences/views gratefully received.

  Read the article

• Binding a property to change the listbox items foreground individually for each item

  - by Eyal-Shilony

  I'm trying to change the foreground color of the items in the ListBox individually for each item, I've already posted a similar question but this one is more concrete. I hoped that the state of the color is reserved for each item added to the ListBox, so I tried to create a property (in this case "HotkeysForeground"), bind it and change the color when the items are added in the "HotkeyManager_NewHotkey" event, the problem it's changing the foreground color for all the items in the ListBox. How can I do that per item ? Here is the ViewModel I use. namespace Monkey.Core.ViewModel { using System; using System.Collections.ObjectModel; using System.Windows.Media; using Monkey.Core.SystemMonitor.Accessibility; using Monkey.Core.SystemMonitor.Input; public class MainWindowViewModel : WorkspaceViewModel { private readonly FocusManager _focusManager; private readonly HotkeyManager _hotkeyManager; private readonly ObservableCollection<string> _hotkeys; private Color _foregroundColor; private string _title; public MainWindowViewModel() { _hotkeys = new ObservableCollection<string>(); _hotkeyManager = new HotkeyManager(); _hotkeyManager.NewHotkey += HotkeyManager_NewHotkey; _focusManager = new FocusManager(); _focusManager.Focus += FocusManager_Focus; } public Color HotkeysForeground { get { return _foregroundColor; } set { _foregroundColor = value; OnPropertyChanged(() => HotkeysForeground); } } public ReadOnlyObservableCollection<string> Hotkeys { get { return new ReadOnlyObservableCollection<string>(_hotkeys); } } public string Title { get { return _title; } set { _title = value; OnPropertyChanged(() => Title); } } protected override void OnDispose() { base.OnDispose(); _hotkeyManager.Dispose(); _focusManager.Dispose(); } private void FocusManager_Focus(object sender, FocusManagerEventArgs e) { Title = e.Title; } private void HotkeyManager_NewHotkey(object sender, EventArgs eventArgs) { HotkeysForeground = _hotkeys.Count <= 2 ? Colors.Blue : Colors.Brown; _hotkeys.Clear(); foreach (var hotkey in _hotkeyManager.GetHotkeys()) { _hotkeys.Add(hotkey); } } } } Here is the view. <Window x:Class="Monkey.View.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:System="clr-namespace:System;assembly=mscorlib" Title="{Binding Mode=OneWay, Path=Title, UpdateSourceTrigger=PropertyChanged}" Height="200" Width="200" ShowInTaskbar="False" WindowStyle="ToolWindow" Topmost="True" ResizeMode="CanResizeWithGrip" AllowsTransparency="False"> <Window.Resources> <SolidColorBrush Color="{Binding HotkeysForeground}" x:Key="HotkeysBrush"/> </Window.Resources> <ListBox Canvas.Left="110" Canvas.Top="74" Name="HotkeyList" Height="Auto" Width="Auto" HorizontalContentAlignment="Left" BorderThickness="0" ScrollViewer.CanContentScroll="False" ScrollViewer.HorizontalScrollBarVisibility="Disabled" ScrollViewer.VerticalScrollBarVisibility="Disabled" ItemsSource="{Binding Path=Hotkeys}" VerticalAlignment="Stretch" VerticalContentAlignment="Center" FontSize="20"> <ListBox.ItemContainerStyle> <Style TargetType="ListBoxItem"> <Setter Property="IsEnabled" Value="False" /> </Style> </ListBox.ItemContainerStyle> <ListBox.ItemTemplate> <DataTemplate> <Label Content="{Binding}" Foreground="{StaticResource HotkeysBrush}"/> </DataTemplate> </ListBox.ItemTemplate> </ListBox> </Window> Thank you in advance.

  Read the article

< Previous Page | 66 67 68 69 70 71 72  | Next Page >