Search Results

Search found 8298 results on 332 pages for 'laptop'.

Page 70/332 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

  • Unable to ping between subnets and out to internet

    - by battlemidget
    My setup is Modem - Linksys router - Laptop with 2 devices (wlan0/eth0) - desktop machine Router is 192.168.1.1 gateway to the internet Laptop wlan0 is 192.168.1.4 with a gw of 192.168.1.1 Laptop eth0 is 192.168.2.254 which acts as a second gateway desktop is 192.168.2.100 On laptop i've setup ip_forward to 1, and have inserted 2 iptables rules -A FORWARD -i eth0 -o wlan0 -j ACCEPT -A FORWARD -i wlan0 -o eth0 -j ACCEPT The laptop can ping outside the network (i,e, yahoo.com) it can not ping 192.168.2.100. The desktop can ping 192.168.2.254 but nothing outside the network or 192.168.1.0 subnet. On laptop ip route show lists: 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.254 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.4 127.0.0.0/8 dev lo scope link default via 192.168.1.1 dev wlan0 What am I missing to make my desktop go through the laptop in order to access the router which provides access to the internet? Thanks

    Read the article

  • I have to manually enter the pwd when I login at school and when I come back home with my laptop (DELL E6410)

    - by Bong Paduano
    I didn't have to do this the first 3 months of me going to school. My laptop used to be able to connect to my Home WiFi and school Wifi automatically then after the 3rd month something changed and eversince then I literally have to manually enter each of the Wifi passwords in each location each time I try to connect to their respective WLAN. I tried adding each WiFi networks in the "Manage wireless networks" section in the Network and Sharing Center but everytime I login to one of the location, the created network disappears and I did this more than once. I tried restoring the OS back but to no avail. Can someone please assist me on this issue. I'm not sure if this issue has been addressed in this website but I haven't seen any similar question in here. I appreciate any help anyone may be able to share.

    Read the article

  • Send chrome tab from w7 laptop to w7 HTPC? (Like with iPad to AppleTV)

    - by Justin
    For the last couple days I've been trying to figure out how to get open tabs syncing between chrome installs on different computers to no avail. (if it's supposed to work the way I think it should, that is.) I have a laptop that I do all my web browsing on. Once in a while I'll come across some video that's worthy of the big-screen and the surround sound and want to open that tab (or media) on the HTPC. It'd be nice if I could just 'Right click Send to HTPC' and it opens up there with no further hassle. But even opening chrome on the HTPC and finding all my current tabs waiting would be fine. Alas, open tabs syncing doesn't seem to actually open tabs on other devices for me. Has anyone come up with a way to accomplish anything similar? Thanks all!

    Read the article

  • Can I move files from a laptop hard drive with a corrupt sector to a USB hard drive?

    - by Corey
    I have a hard drive that is on its way out and won't boot to Windows 7. The Windows partition takes up the whole disk. I thought I would try to recover some recent files that hadn't been backed up. Assuming the files are recoverable, how can I explore the drive that has the corrupt sector and transfer files to a USB hard drive? If it helps, the laptop is able to see the USB drive when choosing a boot order. Some searching lead me to WinPE 3.0, part of the Windows Automated Install Kit. Is that a method?

    Read the article

  • Workspace Issues on ubuntu 12.10

    - by JaySch
    I'm having the following problem with 12.10 Unity running on a Toshiba A505 16" display laptop using an external 24" Samsung LED monitor (resolution 1920 x 1080 (16:9). Also using the default 2 x 2 workspaces: After powering up the laptop, I Click the Workspace Switcher and the 4 images which represent Workspace 1, Workspace 2, Workspace 3, and Workspace 4 are visible but are in a very elongated, stretched out aspect ratio. Also, any desktop icons placed on the left side of the screen don't show up when I go to full view on any of the 4 workspaces. To resolve this issue, I open up the laptop lid until the video display switches from the external Samsung LED monitor to the internal laptop display, which renders the four workspaces perfectly. I then close the laptop lid and now the workspaces display the correct aspect view; both in the workspace switcher thumbnail view an in full view. I can now see the full desktop, including any desktop icons. Is there a way to configure my system so that Workspaces work properly when the laptop is connected to an external monitor without having to open and close my laptop? Thank you.

    Read the article

  • Why is my biometric logon method no longer default and how to fix it? Win 7-based lenovo laptop

    - by StormRyder
    My laptop has been having some random problems with hibernating properly. That is a whole another topic that I still haven't resolved, but this is a different issue. The issues are connected, I guess, because one time after my computer experienced a failed hibernate, my login screen changed: since then my login screen always appears as the standard one with a prompt to type in a password. I can still use the finger scanner by clicking "other credentials" button. But that's annoying having to do that every time; previously the prompt to use finger scanner was the default one, whereas the typing password access was the alternate. How do I bring this arrangement back? In other words, how to switch the default from the type password prompt to the finger scan prompt? From online searches, I have only found discussions of turning the biometric access on or off... but clearly it is turned on and working, since I can use it. It's just not the default for some reason...

    Read the article

  • Wireless very slow on one laptop on network, all other machines normal?

    - by th3dude19
    My new laptop (Acer Aspire Timeine 3810TZ running Windows 7 Home Premium 64bit) is acting very strange on my wireless network. Below are the issues I'm noticing... The connection frequently drops. I see the icon change from 'full bars' to 'empty bars with yellow star (meaning no connection)' occasionally. Almost every website I visit (Firefox) hangs for a long time on 'Looking up www.amazon.com' for example. After a long pause, it finally starts loading the website. Neither of these problems exist on any other machines on my network. I also have a desktop running the same OS wirelessly and it works fine. I've run several Speedtest.net tests and the speeds are great (20MBit down/4 up). Results from pingtest.net are as follows: Line quality: D Ping: 46ms Jitter: 65ms Packet Loss: 9% These results are to a server that is less than 10 miles from my residence. The results on the other machines in my house are normal. Any suggestions? This is becoming very annoying as I purchased this machine primarily for browsing.

    Read the article

  • How can I restore my laptop from Windows 7 to its original Windows Vista recovery partition?

    - by Cam Jackson
    I bought my Acer laptop 4 years ago with Vista Home Premium x86. It has a recovery partition that I have used successfully in the past to format everything and reinstall Windows to factory settings. I have since upgraded to Windows 7, but I now need to get back to my original installation. Not sure what it's called, but I can successfully get into this recovery thingy: However, when I click the third option (for me I think it says 'Windows Image Recovery' or something like that) it tells me that it can't find any images to recover from :( I have checked and I don't have a windows.old that I can recover from either. One final note, if I launch diskmgmt.msc, these are the partitions: Why is the first partition shaded? Does that mean anything? Both of the 'unlettered' partitions are 100% empty. Did the Windows 7 upgrade process format my Vista system recovery partition?! And finally: How can I get back to my factory settings? EDIT: I did see this question, but neither of the answers apply to my situation. Edit to address jdh's answer: From what I can tell, I never get the option to boot the Vista recovery partition. After hitting F10, I get this screen, except it's partition 2, and I don't have the IN/MINT bit: I hit Escape, and then I get this screen, except without Ubuntu listed, and without the auto-countdown thing: I hit F8, and then I get this screen: I hit Enter on the first option, I end up at the screen in the first screen shot. As I said, from there I click the third option, and it fails to find the image, which I guess makes sense if it's only looking for a Windows 7 recovery. So I either need to make the Windows 7 tool see the Vista recovery partition, or I need the boot loader (?) to let me select Vista earlier in the process. Any ideas?

    Read the article

  • what type of laptop do I need to run a amd64 or i386 VM?

    - by Frank Schwieterman
    I was running an amd64 build of Ubuntu on a VM on a Windows host which was also amd64. Later I found I could not run the same amd64 iso on my laptop, which is intel without hyper-V. I was confused I thought chipset mattered, but maybe it does not. When buying a PC or Apple, is there anything to check about the chipset to make sure it can run different types of VMs? In my case, I was trying to run ubuntu on a Thinkpad T520. Per answer below, I did need to enable some bios settings. I'm still having some issues. Running ubuntu on virtual box, when I try to use ubuntu-12.10-server-amd64.iso for the CD/DVD device to start a new VM, virtualbox complains "Failed to open the CD/DVD image . Could not get the storage format of the medium (VERR_NOT_SUPPORTED). When I try to use ubuntu-12.10-server-i386.iso the ISO is accepted, but then the VM complains "FATAL: No bootable medium found! System halted." I had been using an amd64 iso on my home PC which is amd64 and it works fine, which is why I suspected CPU mismatch was the problem at first. But it seems like I'm having issues, and maybe this superuser thread can be used to verify the cpu is irrelevant in this case.

    Read the article

  • Looking for advice on using dd to backup a dual boot laptop.

    - by AvatarOfChronos
    My questions boils down to this. If I do "dd if=/dev/sda of=usbdrive" can anybody confirm that this will get everything including mbr/partition information/all four partitions and create a drive that I can swap with the failing internal drive without losing anything? If this is done while the computer is running will it still copy everything? At this point I'm afraid to shutdown the computer for fear of it never starting again. Secondly, how tolerant is dd of failing drives? Has anybody used it to recover a half dead drive before that can share any potential pitfalls? Did it get the data ok or is this going to be a hope for the best kind of situation? And lastly, If the usbdrive is larger than the failing internal drive I'll still be able to expand the partitions later so I'm not losing space? this last part seems silly to ask but with my current streak of bad luck I'll end up overwriting some magic bit and forever turning a 640gb hdd into a 500gb hdd. Also if anybody has a better solution to create a complete clone that gets everything I'm all for hearing about it. PostScript: I had been making periodic backups however when whatever miasma that killed the laptop struck it also got the NAS :( Post PostScript: both devices were on a UPS system.

    Read the article

  • How is the extra mSATA SSD disk used/configured in a Dell XPS laptop?

    - by Mark
    Some machines in the new XPS laptop range from Dell come with a regular, large (500GB+) HDD and an additional 32GB m-SATA SSD. The only detail I can find about this extra drive on the Dell site is this: Store your important files, multimedia and photos with XPS 15’s large hard drive options. To get instant access to your media, choose an optional mSATA solid-state drive (SSD) that can boot up to twice as fast as a regular hard drive and resumes in less than 1 second. I'd like to know more about how this extra drive is set up and used, specifically: Is anything installed on it (e.g. OS files or a boot loader) or is it just used as swap space? Is the m-SATA drive visible as a lettered drive in Windows? (I'd guess not if it's used for swap file only.) Is this unusual configuration likely to cause any problems later down the line - e.g. when upgrading to Windows 8? As usual, Dell's sales team haven't been able to help. If anyone's actually got a Dell machine with this or a similar hard drive set-up and can give a definitive answer rather than speculation I'll accept the answer.

    Read the article

  • Why is my Toshiba Satellite L675D laptop not connecting to my HD TV using an HDMI cord?

    - by Akasha Eyre
    I'm having a problem connecting my Toshiba Satellite L675 laptop to my Samsung HD TV. I've done it before using an HDMI cord but now, for some odd reason, it's not connecting at all. My computer screen before would go completely black for a second & then come back & (with it being attached to the TV with the HDMI cord & it being on the proper channel) it would make a sound, come on & work beautifully. Now, I try hooking it up & it doesn't do anything. No black screen, no sound. The TV screen just says there's no connection & that I need to check out the power source. I'm still checking around, trying to find out if there's a virus in my computer (since my dad & I have the same computer & he can connect his to the TV with no problems), or if I deleted something that had to do with the connection. I've tried turning my computer off & letting it sit for a while, I've tried checking out other websites & have come up with nothing.

    Read the article

  • My Samsung R480 laptop freezes for short and inconsistent periods of time.

    - by anonymous
    I have a Samsung R480 laptop running Windows 7. It's great, I love it to death, but every so often it'll start having, for lack of a better term, "hiccups". It would freeze completely, emit a loud BZZZZZZT from the speakers (think when a video freezes and the sound gets stuck), then return to working order all in a span of 0.5~2 seconds. It has happened while I was playing Mass Effect, while I was watching both HD and non-HD videos, and while I was surfing the internet (which I've noticed while watching YouTube videos and playing Entanglement, but also noticed while using Facebook, minus the buzzing sound). My Initial hypothesis was that my GPU or CPU were overheating as it would shut down while playing Mass Effect, but when I turned off my WiFi card hardware using [fn + F9], the problem was resolved. As I currently see it, it could be a problem with my CPU, my WiFi card, or my sound card. It could also be a software related issue, possibly an ill-functioning process. It could be chrome related. A memory leak from chrome maybe? Does anyone know how to resolve this?

    Read the article

  • Laptop + External Monitor: Possible to Scale Mouse-crossover Position?

    - by Brian Lacy
    I have a laptop with a 16" screen @ 1366x768 resolution, and a 24" external monitor at 1920x1200 resolution. I'm extending the Windows 7 desktop onto the other screen. The 24" is the secondary monitor, and is positioned so the bottom of that screen lines up with the bottom of the 16" screen. Currently, if I move the mouse to the top portion of the 24" screen, then move left, the mouse will stop at the edge of the 24" screen until I move it down far enough to get into the range of the 16" screen. So that's all pretty standard; but I'm wondering if there's any software out there that will allow me to "scale" the mouse-crossover position, such that if I'm at the TOP of the 24" screen and move left, the mouse will cross to the TOP of the 16" screen, whereas if I'm at the BOTTOM of the 24" screen, crossing over will position the mouse at the BOTTOM of the 16" screen. So then, if the mouse cursor is on the 24" screen at (x,y) position (10,600), and I move 20 pixels left, the mouse is now on the 16" screen at position (1356,384). Anyone know of such a solution?? Note: I also use Ubuntu, so if there's a solution to this for X, but not Windows, I'd be interested in that also.

    Read the article

  • How can I repair my USB drive?

    - by yurko
    USB drive is in read only state and I can't repair it. First of all I tried erase it using dd: root@yurko-laptop:/home/yurko-laptop# ls -l /dev/disk/by-id | grep usb lrwxrwxrwx 1 root root 9 ??? 18 23:45 usb-Generic_Flash_Disk_C173828A-0:0 -> ../../sdb lrwxrwxrwx 1 root root 10 ??? 18 23:45 usb-Generic_Flash_Disk_C173828A-0:0-part1 -> ../../sdb1 root@yurko-laptop:/home/yurko-laptop# dd if=/dev/zero of=/dev/sdb dd: ?????? ? «/dev/sdb»: ?? ?????????? ????????? ????? 8257537+0 ??????? ??????? 8257536+0 ??????? ???????? ??????????? 4227858432 ????? (4,2 GB), 942,633 c, 4,5 MB/c After that I wanted to create new filesystem using fdisk: root@yurko-laptop:/home/yurko-laptop# fdisk /dev/sdb You will not be able to write the partition table. WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdb: 4227 MB, 4227858432 bytes 4 heads, 63 sectors/track, 32768 cylinders Units = cylinders of 252 * 512 = 129024 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 18 32768 4126596 b W95 FAT32 Command (m for help): fdisk showed that the partition still exists and I can't write the partition table. I tried to delete the existing partition: Command (m for help): d Selected partition 1 Command (m for help): w Unable to write /dev/sdb root@yurko-laptop:/home/yurko-laptop# Why am I not be able to write the partition table? Does it mean that some hardware failure occurred? And is it possible to repair the current USB drive? I've tried to use hdparm and it showed that the readonly flag is on: root@yurko-laptop:/home/yurko-laptop# hdparm /dev/sdb /dev/sdb: SG_IO: bad/missing sense data, sb[]: f0 00 05 00 00 00 00 0a 00 00 00 00 26 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 multcount = 0 (off) readonly = 1 (on) readahead = 256 (on) geometry = 1016/131/62, sectors = 8257536, start = 0

    Read the article

  • Turn off keyboard back-light Sony (VAIO SVF1521DCXW)

    - by KasiyA
    I have a Sony laptop and I want to turn keyboard back-light off. It doesn't have a shortcut function key for doing this on the keyboard . I can turn off it with VAIO Control Center in Windows but I don't know how can I turn it off in Ubuntu 14.04. There isn't available to me: /sys/devices/platform/sony-laptop/kbd_backlight doesn't exist on my machine. I have this folder /sys/devices/platform/sony-laptop/ and there is three folder one power folder and two shortcut-ed folder driver , subsystem and five file contains battery_care_health , battery_care_limiter , modalias , touchpad and event This is the output of running sudo modinfo sony-laptop: filename: /lib/modules/3.13.0-34-generic/kernel/drivers/platform/x86/sony-laptop.ko version: 0.6 license: GPL description: Sony laptop extras driver (SPIC and SNC ACPI device) author: Stelian Pop, Mattia Dongili srcversion: 5C6E050349475558A231C59 alias: acpi*:SNY6001:* alias: acpi*:SNY5001:* depends: intree: Y vermagic: 3.13.0-34-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: 50:0B:C5:C8:7D:4B:11:5C:F3:C1:50:4F:7A:92:E2:33:C6:14:3D:58 sig_hashalgo: sha512 parm: debug:set this to 1 (and RTFM) if you want to help the development of this driver (int) parm: no_spic:set this if you don't want to enable the SPIC device (int) parm: compat:set this if you want to enable backward compatibility mode (int) parm: mask:set this to the mask of event you want to enable (see doc) (ulong) parm: camera:set this to 1 to enable Motion Eye camera controls (only use it if you have a C1VE or C1VN model) (int) parm: minor:minor number of the misc device for the SPIC compatibility code, default is -1 (automatic) (int) parm: kbd_backlight:set this to 0 to disable keyboard backlight, 1 to enable it (default: no change from current value) (int) parm: kbd_backlight_timeout:meaningful values vary from 0 to 3 and their meaning depends on the model (default: no change from current value) (int) With the suggested command: sudo modprobe -r sony_laptop sudo modprobe -v sony_laptop kbd_backlight=0 Output was: insmod /lib/modules/3.13.0-34-generic/kernel/drivers/platform/x86/sony-laptop.ko kbd_backlight=0 It doesn't seem to affect the keyboard backlight. And also trying this command: sudo modprobe -v sony_laptop kbd_backlight_timeout=3 kbd_backlight=0 and doesn't seem to effect the keyboard backlight I also test it after restart laptop, And I didn't see any effect too. Important : By default, keyboard backlight is off; when I press a key it turns on and after 15 seconds it turns off again. It's the same result on battery and AC power I followed also http://ubuntuforums.org/showthread.php?t=2139597 and Keyboard backlighting not working on a Vaio VPCSB11FX but didn't work so.

    Read the article

  • Frequent and weird wifi disconnections

    - by Sidou
    How would you explain, troubleshoot (and solve) the following problem? Wifi ADSL modem router D-link 2640R installed in living room at about 1.8m height. Working fine, synchronising and getting/serving stable internet connection. First situation: -Laptop 01 in other end of the house, let's say in room01 southern to the living room, distant by about 15m. Getting stable signal of good to very good quality. No disconnection. -Laptop 02 in room02 opposite to room01 (5m West) which makes it almost at the same distance and direction from the router located 15m North. Getting stable signal of good to very good quality. No disconnection. Second situation: -Laptop 01 moved to room03 Northern to the living room (actually just 3m behind the wall where the router lies). Getting stable signal of excellent quality. No disconnection. -Laptop 02 still in room02 but now experiences frequent disconnections (actually almost impossible to get the Internet even though the signal level is still very good. Either no Internet with the wifi icon appearing connected to access point or no connection established at all which happens every 2 minutes and that means virtually no Internet at all as I can just get a timeframe of 1 minute or so to load any website or even get to the router's web based control panel. If Laptop 01 is completely shut down or its wifi adapters shut down or even still working but its wifi MAC address forbidden, then Laptop 02 has no problem at all. If Laptop 02 is moved to a nearer location to the router, in the living room for instance, then no connection problem occurs even if Laptop 01 is also connected. And also if we move back Laptop 01 to its original location (room 01), then no problem as well. I'm completely lost and don't know how to address this issue. I tried to change the Wifi channel and even tried the auto channel scan but that didn't solve it. I know that the problem is probably coming from Laptop 01 being in its new location or some sort of interference as the problem occurs only under the described condition but I have no idea how to solve it! I also scanned the neighborhood for wifi jam using InSSIDer, there are few other access points but they don't seem to affect the situation. Any ideas about the steps to follow or tools to use ?

    Read the article

  • How to tell Windows 7 "sleep when laptop is closed, unless there's an external monitor connected; then use that"?

    - by Josh
    Most of the time, I would like my Windows 7 laptop to sleep when I close it. But sometimes, I like to connect an external monitor over DVI. I would like my laptop to use the external monitor when I close the lid, but only when a monitor is connected to the DVI port. Otherwise, sleep when closed. Is there any way I can do that, without manually changing the power settings every time I decide to use the monitor?

    Read the article

  • is it a good idea to change a recovery partition from primary to logical? [HP laptop]

    - by DiegoDD
    I have a new HP laptop, model dv6-6c85la, with 1TB hard drive, and it has 4 primary partitions, like this: |<- system [199 MB] -|<- c: [899.8 GB] -|<- d:(recovery) [27.5 GB] -|<- e:(hp_tools) [4 GB] -| I wanted to make another partition, splitting "C" which is the main partition, into TWO partitions, and leave the rest as it is. but it doesn't let me because they are already 4 primary partitions (the ones in the diagram). I read somewhere, that i could in fact split C into 2 partitions, but only if the adjacent partition (in this case d:(recovery) is converted into a "logical" partition. That way, the new unallocated part taken from C, and the recovery partition, would each be logical, "inside" an extended partition (right???) As i understand, the resulting partitions would be: primary (system, no letter), primary (c:), extended [ logical (x:) | logical(d:recovery) ], primary (e: hp_tools) "x" being the new one. am i correct? My question is, if i do convert the recovery partition to logical (and thus, it is inside an extended partition adjacent to the new "x:" one), would i have any problems when in case of a disaster i would like to restore the system using the now logical instead of primary RECOVERY partition? Or it is completely safe to change it to logical? My main concern is because i think i may need to be primary so the recovery can proceed in boot time? Or i am completely wrong? how does the recovery process happens? I also understand that i can simply create recovery media, in DVDs, and then even i would be able to delete that recovery partition completely, but as of now, i don't want to do that. I may create the disks, but i don't want to delete the partition, simply because it would be a lot faster and easier to recover from a hard drive than disks. Wrapping up: if i change a recovery partition from primary to logical, will the system still be capable of using it to recover? or it NEEDS to be primary to work? The whole point is that i want to split C:, but as things are, i cant directly, i'd need to change the recovery partition to logical. Or is there another way? thanks.

    Read the article

  • ruby on rails configuration

    - by Themasterhimself
    Im using the following guide for getting started with rails for ubuntu 9.10. http://guides.rails.info/getting_started.html I have installed both ruby and gem. gokul@gokul-laptop:~$ ruby -v ruby 1.8.7 (2009-06-12 patchlevel 174) [i486-linux] gokul@gokul-laptop:~$ gem -v 1.3.6 gokul@gokul-laptop:~$ For rails, gokul@gokul-laptop:~$sudo gem install rails doesnt seem to give any response. so used the synaptic package manager for installing it. And it seems to have installed correctly. gokul@gokul-laptop:~$ rails Usage: /usr/bin/rails /path/to/your/app [options] Options: -r, --ruby=path Path to the Ruby binary of your choice (otherwise scripts use env, dispatchers current path). Default: /usr/bin/ruby1.8 -d, --database=name Preconfigure for selected database (options: mysql/oracle/postgresql/sqlite2/sqlite3/frontbase/ibm_db). Default: sqlite3 -D, --with-dispatchers Add CGI/FastCGI/mod_ruby dispatches code to generated application skeleton Default: false --freeze Freeze Rails in vendor/rails from the gems generating the skeleton Default: false -m, --template=path Use an application template that lives at path (can be a filesystem path or URL). Default: (none) Rails Info: -v, --version Show the Rails version number and quit. -h, --help Show this help message and quit. General Options: -p, --pretend Run but do not make any changes. -f, --force Overwrite files that already exist. -s, --skip Skip files that already exist. -q, --quiet Suppress normal output. -t, --backtrace Debugging: show backtrace on errors. -c, --svn Modify files with subversion. (Note: svn must be in path) -g, --git Modify files with git. (Note: git must be in path) Description: The 'rails' command creates a new Rails application with a default directory structure and configuration at the path you specify. Example: rails ~/Code/Ruby/weblog This generates a skeletal Rails installation in ~/Code/Ruby/weblog. See the README in the newly created application to get going. gokul@gokul-laptop:~$ app folder is created with all the proper folders. The problem starts with the following commands... gokul@gokul-laptop:~$ sudo gem install bundler [sudo] password for gokul: Successfully installed bundler-0.9.24 1 gem installed Installing ri documentation for bundler-0.9.24... Installing RDoc documentation for bundler-0.9.24... gokul@gokul-laptop:~$ bundle install Could not locate Gemfile gokul@gokul-laptop:~$ coming to the database, the default sqlite3 seems to have installed correctly. gokul@gokul-laptop:~$ sqlite3 SQLite version 3.6.16 Enter ".help" for instructions Enter SQL statements terminated with a ";" sqlite The welcome aboard page is not being able to be found at (http://localhost:3000) after executing the following commands... gokul@gokul-laptop:~/Desktop$ rails blog create create app/controllers create app/helpers create app/models create app/views/layouts create config/environments create config/initializers create config/locales create db create doc create lib create lib/tasks create log create public/images create public/javascripts create public/stylesheets create script/performance create test/fixtures create test/functional create test/integration create test/performance create test/unit create vendor create vendor/plugins create tmp/sessions create tmp/sockets create tmp/cache create tmp/pids create Rakefile create README create app/controllers/application_controller.rb create app/helpers/application_helper.rb create config/database.yml create config/routes.rb create config/locales/en.yml create db/seeds.rb create config/initializers/backtrace_silencers.rb create config/initializers/inflections.rb create config/initializers/mime_types.rb create config/initializers/new_rails_defaults.rb create config/initializers/session_store.rb create config/environment.rb create config/boot.rb create config/environments/production.rb create config/environments/development.rb create config/environments/test.rb create script/about create script/console create script/dbconsole create script/destroy create script/generate create script/runner create script/server create script/plugin create script/performance/benchmarker create script/performance/profiler create test/test_helper.rb create test/performance/browsing_test.rb create public/404.html create public/422.html create public/500.html create public/index.html create public/favicon.ico create public/robots.txt create public/images/rails.png create public/javascripts/prototype.js create public/javascripts/effects.js create public/javascripts/dragdrop.js create public/javascripts/controls.js create public/javascripts/application.js create doc/README_FOR_APP create log/server.log create log/production.log create log/development.log create log/test.log gokul@gokul-laptop:~/Desktop$ cd blog gokul@gokul-laptop:~/Desktop/blog$ rake db:create (in /home/gokul/Desktop/blog) gokul@gokul-laptop:~/Desktop/blog$ rails server create create app/controllers create app/helpers create app/models create app/views/layouts create config/environments create config/initializers create config/locales create db create doc create lib create lib/tasks create log create public/images create public/javascripts create public/stylesheets create script/performance create test/fixtures create test/functional create test/integration create test/performance create test/unit create vendor create vendor/plugins create tmp/sessions create tmp/sockets create tmp/cache create tmp/pids create Rakefile create README create app/controllers/application_controller.rb create app/helpers/application_helper.rb create config/database.yml create config/routes.rb create config/locales/en.yml create db/seeds.rb create config/initializers/backtrace_silencers.rb create config/initializers/inflections.rb create config/initializers/mime_types.rb create config/initializers/new_rails_defaults.rb create config/initializers/session_store.rb create config/environment.rb create config/boot.rb create config/environments/production.rb create config/environments/development.rb create config/environments/test.rb create script/about create script/console create script/dbconsole create script/destroy create script/generate create script/runner create script/server create script/plugin create script/performance/benchmarker create script/performance/profiler create test/test_helper.rb create test/performance/browsing_test.rb create public/404.html create public/422.html create public/500.html create public/index.html create public/favicon.ico create public/robots.txt create public/images/rails.png create public/javascripts/prototype.js create public/javascripts/effects.js create public/javascripts/dragdrop.js create public/javascripts/controls.js create public/javascripts/application.js create doc/README_FOR_APP create log/server.log create log/production.log create log/development.log create log/test.log gokul@gokul-laptop:~/Desktop/blog$ hope some one can help me with this...

    Read the article

  • Ruby Dir.glob works on laptop not on desktop?

    - by Nick Faraday
    I have a ruby shell script that works perfectly on my laptop, but Dir.glob doesn't seem to work when I try and run it on my desktop. Here is the code: sFileTemplate = File.join("**", sResolutions, "**", "*."+sType) sFiles = Dir.glob(sFileTemplate) Both machines run OSX 10.5 and are running ruby -v 1.9.1. Am I calling glob wrong? Thanks

    Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >