Search Results

Search found 6172 results on 247 pages for 'usb headset'.

Page 70/247 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• Analog sticks not working, qtsixa+PCSX combination

  - by Otto Boström

  A few days ago I finally got my PS3 controller to work with QtSixA, and then in PCSX after some tweaking with the controls. But, I haven't figured out how on earth I will be able to get the analog sticks working. I've been triyng to add them in the controls for all angles in PCSX, where you move the analog stick the way it's supposed to be and then clicking a button to change the setting. I've enabled joysticks in the options for the controller, and my options in my controller are: [x] Enable buttons [x] Enable sensitive buttons [x] Enable Axis [ ] Enable accellerometers [ ] Enable Acceleration [ ] Enable Speed [ ] Enable position The controller is a standard PS3 controller, Dualshock 3. Plugged in with USB cable. Thanks in forehand!

  Read the article

• Ubuntu 12.10 over Ubuntu 11.10 seems to hang

  - by Angela Trapp

  My installation of Ubuntu 12.10 over Ubuntu 11.10 seems to hang on "saving installed packages". How long should I wait before knowing for sure that something is wrong? I stopped it once and tried re-installing but am getting the same results. I'm installing from a USB stick. I'm connected to the internet using a wired connection but I'm reading here to connect to a wi-fi network while installing. Could this possibly be the issue? I can't install using wi-fi at the moment as my router was fried in a brownout yesterday. I've ordered another router online so as soon as it gets in, I'll try again. Any suggestions are appreciated! Please let me know if you need more information. It's a 32-bit installation and I have 1 GB of memory. Thanks!

  Read the article

• Unable to Connect MTS Mblaze modem in Ubuntu 12.10?

  - by CracLock

  I am using Ubuntu for 1st time and i do have an modem MTS Mblaze in India which i am using in Windows. But when i tried to connect in Ubuntu 12.10 using give default method i.e. choose country, modem type, connection, add details and then connect. But its not working. Then i came over another solution at http://www.e-dirts.com/2012/how-to-setup-mts-mblaze-usb-modem-in-ubuntu-gnulinux/ But no installation of CrossPlatformUI-V2.1.2-SSTL-ALL-ubuntu.deb happens at all. Is it because i'm using 12.10 version while its tested using 12.04 version. And does that another 'Advanced user method' can be followed without internet? Please suggest. Help

  Read the article

• How to copy existing movie files on ipad to watch?

  - by Rob Van Dam

  I have an iPad and a desktop running Ubuntu 12.04 with lots of movie files of various formats (avi, mp4, m4v, etc). Is it possible to transfer those files from within linux directly to the iPad (without using iTunes to sync) over USB and then play those movies on the iPad without reformatting/resizing all of them? I've used iTunes in a Windows XP virtualbox instance with other iOS mobile devices before but I would prefer a pure linux approach if possible. (I'm creating this question so that I can share the solution I found because I failed to find a simple, satisfactory answer elsewhere).

  Read the article

• Why won't my install on Macbook work?

  - by Wyatt

  I am trying to install Ubuntu 12.04 on my Macbook. The CD drive is broken, so I am going from a USB flash drive I created. I can get it to "Try Ubuntu" perfectly fine, as a matter of fact I'm using it right now. However, I really want to install. Everything is partitioned, rEFIt is installed. I run the installer and I follow the guide at Apple Intel Installation I get to the install part of the installer, and after running it ends with a fatal grub error. Anyone know how to get past this? I feel like it has something to do with the fact that I don't get the last dialog box of the installer with the "advanced" tab used in the guide. Any help is greatly appreciated!

  Read the article

• How to mount read-only filesystem as read-write?

  - by Eric

  this is my problem. I have a USB drive which somehow was set as read-only. I want to set it as read write then format it. sudo chown -R eric /dev/sdb Seems to go through, but when I view the drive in Nautilius it says Error mounting: mount: block device /dev/sdb1 is write-protected, mounting read-only mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful inf.o is found in syslog - try dmesg | tail or so. Thanks in advance!

  Read the article

• Install wont boot up, stuck on loading text dots / restarts

  - by Franz Mayo Horkovic

  Friend gave me her laptop, we agreed on Ubuntu, but I have troubles even booting up live version (see the notebook). I tried 12.04 64bit on USB stick, it does nothing, when I choose booting live version, it just restarts PC. Then I tried 32bit version, it starts loading, but its stuck on loading components, printing on black screen just dots ........... I Googled it, found similar problem - somebody suggested to use older version and then upgrade it. I went through 11.04, 10.04 - 64 and 32 same result. Restart or infinite loading. I did memtest, it showed 4 errors, Windows Vista is running "fine", no "bluescreens" etc. Any ideas what am I doing wrong?

  Read the article

• Does 64-bit Ubuntu work on the Acer Aspire One D255

  - by hippietrail

  The Acer Aspire One D255 is the cheapest dual core netbook on the market right now. It has an Intel Atom N550 which should be able to run a 64-bit OS. But when I try to boot the Ubuntu 64-bit live CD I only get one line of diagnostic output that it "found something" on the USB CD drive before locking up. I haven't been able to find anything by Googling yet. Could it just be driver issues for this machine or could the platform be inherently frail for running 64-bit? (My machine is two days old on trial and Windows 7 and Ubuntu 32-bit run but it has locked up under casual use on both OSes.)

  Read the article

• Instruct Ubuntu to boot TORAM from flash drive using unetbootin

  - by Goyuix

  I have used UNetbootin to create an installable / live bootable flash drive from Ubuntu 12.04. However that didn't preserve the normal Ubuntu boot menu which allows to me to enter advanced options. It has a custom menu that I can pick from predefined choices like "Install Ubuntu" and "Try Ubuntu without installing". What I would like is to be able to boot from the USB flash drive, but then be able to remove it from the computer once the desktop has loaded. The laptop I would like to use this on does not have a CD/DVD drive. What do I need to modify on the flash drive to add an option to "Try Ubuntu (RAM)" that passes the TORAM=yes parameter to the initrd options? Are their other things I need to touch/change as well? Bonus: I would guess the answer would also allow for other options like acpi=off as well, but if it is different I would appreciate having that answer too.

  Read the article

• How to create Windows XP LiveUSB using Ubuntu to replace it

  - by Orion Clark

  I am using an Acer Aspire One netbook with no CD-disk drive, and would like to uninstall Ubuntu 12.04 LTS and install Windows XP in its place. The problem here is that I can't seem to find a program that can put the windows boot files on a USB drive from an ISO file. I have Ubuntu fully installed and have tried using unetbootin. When I tried booting from unetbootin I got a screen with a blue box that had the word "default" in it highlighted. underneath the box there was a countdown that said "will boot from default in 10" after the countdown finished the number would revert to ten and nothing would happen. Can someone tell me another program that would be useful for this please?

  Read the article

• Can't get my Blue Snowflake Mic to work

  - by TheNerdAL

  It was working fine when I bought it. I think it was an update or something that made it stop. I don't think the Mic is broken, at least I hope not. Can anyone help? Please? I need it before tommorrow. I'm working on a video. I get this when I check the terminal for what USB devices are connected: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 004: ID 2525:8912 Bus 003 Device 003: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader Bus 003 Device 002: ID 056a:00d2 Wacom Co., Ltd Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Thanks.

  Read the article

• The resulting .iso doesn't work - MultiCD

  - by Ravi

  Burning a separate CD for each distribution (Ubuntu, Kubuntu etc.) is cumbersome. I found MultiCD which promises me to have a single DVD which can hold several distributions. It is very great tool. Main Problem : The resulting .iso created from multicd doesn't work in a USB pen drive through I haven't tested it in a DVD. Running the .iso through pen drive (I mean booting from pen drive) doesn't work. I cannot even run it in live mode or can install it. Concern : I think if I burn the .iso to a DVD then might it will work. But considering it doesn't work in the pen drive, Will it work on the DVD? So how to fix it? If you know other method to make a multi CD/DVD then please tell me.

  Read the article

• "Unknown Filesystem" error without CDROM

  - by Utku Tarhan

  I've got a problem with Ubuntu 12.04 LTS. At first I ran mount command on terminal. Then I restarted my computer. After that, when my computer opened there is writing this: error: unknown filesystem grub rescue I searched commands and I found ls command. I tried it and I got this: (hd0) (hd0,msdos5) (hd0,msdos1) My computer's DVD driver is broken and I tried to boot Ubuntu on USB but it doesn't worked. My computer's specs: PC Name: HP Presario F780ET Processor: AMD Turion 64 X2 Mobile Technology TL-60 Ram: 2GB Ubuntu Version: 12.04 LTS

  Read the article

• 'unknown filesystem' grub rescue prompt; trying to wipe drive and boot 10.10 live

  - by Patrick

  Im currently running Win7, and want to wipe the drive and install 10.10. I have 10.10 loaded on a USB thumbdrive and it sees the device in BIOS but it only reaches a screen saying; Unknown Filesystem grub rescue> Ive read several results from google and a couple here where people are trying to dual boot and i assume save the data on the drive, but i dont care about doing that, and would prefer to just wipe the drive and start fresh. What steps can i take to get the drive to a point where i can load 10.10 live and get it installed?

  Read the article

• How do I create a 12.04 LiveUSB for a non-PAE machine?

  - by DrSkylaser

  I'm trying to create a dual-boot laptop with Ubuntu 12.04 and some flavor of Windows (TBD). To do that, I need to do some work on partitions & install 12.04. To do that, I need to create a bootable USB that will work with my non-PAE-capable CPU. Someone pointed me to a mini.iso that was allegedly non-PAE-friendly, but it gave me the same error as the straightup 12.04 desktop ISO. What version do I actually need? (This isn't going to be a virtual machine--I don't think the laptop has the RAM to handle that happily--so enabling PAE in the virtual machineware doesn't help me.)

  Read the article

• copy files to Nexus 4 on Kubuntu (13.04)

  - by cerr

  I know, this has been asked a few times already but I'm still having troubles to get files copied my new Nexus 4 phone mounted on my Kubuntu 13.04 machine. I followed the guide at: http://www.pocketables.com/2013/03/how-to-mount-the-lg-nexus-4-as-a-usb-drive-in-linux.html I would only get: $ cp -r /mnt/media/Albums/A\ Perfect\ Circle\ -\ Thirteenth\ Step/ . cp: accessing ‘.’: Transport endpoint is not connected reg@regDesktopHome:/media/nexus4/Internal storage/Music$ ls -l but thereafter , mount still shows it mounted: mtpfs on /media/nexus4 type fuse.mtpfs (rw,nosuid,nodev,allow_other) What's going on here? Thanks for the assistance!

  Read the article

• how to find 3g modem signal strength with out AT commands?

  - by neckTwi

  when i try to find signal strength of my modem using AT+CSQ, the usb device is locked by the network manager. To find the signal strength with AT+CSQ i have to first disable network connection using #nmcli nm wwan off to unlock the device inode /dev/ttyUSBX. Is there any nmcli option to get signal strength or any other option? EDIT The gdbus object for NetworkManager don't have any method like getSignalStrength. Network manager is locking device file preventing to use AT commands. nm-applet was able to display signal strength in system tray. so there should be a way to get signal strength form network manager! nmcli is command line counter part of nm-applet. Can i get signal strength using nmcli? nothing about signal strength is mentioned in its man pages.

  Read the article

• Force Xorg to run in specific resolution

  - by Z9iT

  From my past experience (using Win-Xp), this particular monitor works only on 60Hz , Best resolution being 1024*768. I have "installed n configured" Ubuntu 12.04 Minimal (on USB stick) so that most of the time terminal is used, however whenever theirs a need to enter GUI I may issue startx command to go into gnome. However the problem is that on this particular system, issuing this command poses problem for its default refresh rate don't synchronize with the monitor. The display keep on flickering and utterly unreadable. It is visible that gnome has been loaded and default wallpaper and desktop items are visible. But the problem is due to refresh rate different than 60Hz. I am looking for a command attribute to startx command which will force the refresh rate to 60Hz and resolution preferably to 1204*768

  Read the article

• Distro that I can load into RAM?

  - by NullUserException

  Is there a modified version of Ubuntu that I can choose to load to RAM on start up? Kinda like the LiveCD, but that can be easily modified (ie: I can install stuff) when I choose to boot from disk. The idea is to install it to a USB drive. I know there's something similar but slax is lacking in many departments. A "full" version Ubuntu would be better. A LiveUSB installation seems to be pretty close to what I want, but apparently I have to choose whether or not it will be persistent by the time I install it. I want to be able to choose that every time I boot.

  Read the article

• How to test other DE in Ubuntu 12.10 live (alpha)

  - by gsedej

  caution: 12.10 is not yet released but I was told it will say as is also when release happens (live session) So, new ubuntu live session does not have option to "logout" and choose different desktop environment (DE). This function was usable if one installs ubuntu live on USB stick with permanent changes. One can install any software, including KDE (plasma) or LXDE. Until including 12.04, one could simply logout and choose different DE. Now, there is no "logout" option in top right menu and if ran service lightdm restart it automatically logs in to live session account with unity.

  Read the article

• Why can't I access hw:1,0 until gstreamer-properties is run once?

  - by Shadd

  Not necessarily an Ubuntu-specific question but I wasn't sure where else to ask. I have an AverMedia DVD EZMaker 7 which plugs into USB and works well on Ubuntu 12.04. I downloaded and installed the official drivers without error. However, when I try: gst-launch alsasrc device="hw:1,0" ! alsasink device="hw:0,0" it tells me: Setting pipeline to PAUSED ... Pipeline is live and does not need PREROLL ... Setting pipeline to PLAYING ... New clock: GstAudioSrcClock which is the normal output, however there is no audible sound. Trying the command again doesn't help. If I run gstreamer-properties and close it right away (don't need to touch any controls), THEN the gst-launch command works. If I unplug the device and plug it back in or restart the computer, I have to run gstreamer-properties again. What is gstreamer-properties doing that enables the audio?

  Read the article

• Distro that I can load to ram?

  - by NullUserException

  Is there a modified version of Ubuntu that I can choose to load to RAM on start up? Kinda like the LiveCD, but that can be easily modified (ie: I can install stuff) when I choose to boot from disk. The idea is to install it to a USB drive. I know there's something similar but slax is lacking in many departments. A "full" version Ubuntu would be better. A LiveUSB installation seems to be pretty close to what I want, but apparently I have to choose whether or not it will be persistent by the time I install it. I want to be able to choose that every time I boot.

  Read the article

• Explain why MickroC pic18f4550 HID example works

  - by Dr Deo

  MickroC compiler has a library for HID(Human Interface Device) usb communication. In the supplied samples, they specify that the buffers below should be in USB ram and use a pic18f4550. unsigned char readbuff[64] absolute 0x500; // Buffers should be in USB RAM, please consult datasheet unsigned char writebuff[64] absolute 0x540; But the pic18f4550 datasheet says USB ram ranges from 400h to 4FFh So why does their example work when their buffers appear not to be between 400h to 4FFh? Link to full source

  Read the article

• Why do things change between using a LiveCD/LiveUSB and installing Ubuntu?

  - by ahow628

  Here have been a couple of weird experiences I've had with a Ubuntu LiveCD or LiveUSB: 1) I had one of the original Chromebooks (CR-48). I ended up wiping ChromeOS and installing only Ubuntu 12.04.0 just after it came out. It worked like a charm. About a year later, I broke something and reinstalled Ubuntu using 12.04.3 on a LiveUSB. The LiveUSB worked perfectly - screen resolution, wifi, trackpad all worked fine. I installed it (once installing updates, once stock from the USB drive) and both times screen resolution, wifi, and trackpad all broke. I ended up downloading 12.04.0 and installing it then upgrading to 12.04.3 after the fact and everything worked perfectly once again. 2) I purchased a Toshiba Portege z935 and the LiveUSB worked perfectly, namely the wifi. After install, wifi was extremely slow and basically couldn't load any pages. The answer was that Bluetooth conflicted somehow with wifi and Bluetooth had to be disabled to get wifi to work. Yet both could be enabled in the LiveUSB version, no problem. So my question is, why does this happen? Why does everything work perfectly from the LiveUSB version but then get broken when installed on the system? Is there a different way to install Ubuntu that would allow things to be installed over exactly as they were on the LiveUSB version (drivers, settings, etc)? Are there assumptions that the install makes that I could override somehow?

  Read the article

• Network and Storage Devices Throughput Chart

  - by zroiy

  With all of the different storage and network devices that surround our day to day life, understanding these devices data transfer speeds can be somewhat confusing. Think about trying to identify your weakest link in the a chain that starts with an external USB hard drive (or a flash drive) that's connected to a 802.11g wifi router, can you quickly come up with an answer of where's the bottle neck in that chain , is it the router or the storage devices ? . Well, the following chart should give you an idea understanding different devices, protocols and interfaces maximum throughput speeds. Though these numbers can fluctuate (mostly for worse, but sometimes for the better) due to different kind of factors such as OS overhead (or caching and optimization) , multiple users or processes and so on , the chart can still serve to provide basic information on the theoretical throughput different devices and protocols can get to.. Enjoy.  Link to the full size chart   References:http://en.wikipedia.org/wiki/Sata#SATA_revision_1.0_.28SATA_1.5_Gbit.2Fs.29http://en.wikipedia.org/wiki/Usbhttp://en.wikipedia.org/wiki/Usb_3http://en.wikipedia.org/wiki/802.11http://mashable.com/2011/09/21/fastest-download-speeds-infographic/http://en.wikipedia.org/wiki/Thunderbolt_(interface)http://www.computerworld.com/s/article/9220434/Thunderbolt_vs._SuperSpeed_USB_3.0  Icons:http://openiconlibrary.sourceforge.net/gallery2/?./Icons/devices/drive-harddisk-3.png      

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >