Search Results

Search found 7126 results on 286 pages for 'wireless router'.

Page 70/286 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

  • In an environment with multiple WiFi access points, do wireless clients sometimes connect to both at the same time?

    - by Bobby Burgess
    This is more of a curiosity than a problem, but in this new office I have two D-link DAP-2553's connected in a master/slave array (this just means the master keeps certain configuration options aligned with the slave). The network is set to 802.11n-only, and each AP has the same SSID and WPA2 key. The only difference is that they are on different channels (1 and 11). The WiFi network itself is working well. Users can roam around and the signal/speed is fairly consistent. However, I notice that when I look at the 802.11 client list in the web admin page for each of the 2 APs, I see that certain clients are connected to both, for extended periods of time, but I assume they are only passing data through one of them. Not every client is seen on each AP, but at any given time the same MAC address of a WiFi adapter can be associated (and remain associated) with both APs. The client list auto-refreshes every few seconds so I believe I'm looking at the most recent rather than stale information. One of the WiFi adapters that consistently associates with both APs is an Intel Centrino Wireless-N 1030 (laptop chip). Is it part of the WiFi standard that more than one association per WiFi card can be established concurrently on separate APS?

    Read the article

  • Wireless very slow on one laptop on network, all other machines normal?

    - by th3dude19
    My new laptop (Acer Aspire Timeine 3810TZ running Windows 7 Home Premium 64bit) is acting very strange on my wireless network. Below are the issues I'm noticing... The connection frequently drops. I see the icon change from 'full bars' to 'empty bars with yellow star (meaning no connection)' occasionally. Almost every website I visit (Firefox) hangs for a long time on 'Looking up www.amazon.com' for example. After a long pause, it finally starts loading the website. Neither of these problems exist on any other machines on my network. I also have a desktop running the same OS wirelessly and it works fine. I've run several Speedtest.net tests and the speeds are great (20MBit down/4 up). Results from pingtest.net are as follows: Line quality: D Ping: 46ms Jitter: 65ms Packet Loss: 9% These results are to a server that is less than 10 miles from my residence. The results on the other machines in my house are normal. Any suggestions? This is becoming very annoying as I purchased this machine primarily for browsing.

    Read the article

  • Upgrade a Retro Corded Mouse with Wireless Bluetooth Connectivity

    - by Jason Fitzpatrick
    If there’s a beloved retro mouse gathering dust in your office closet for want of wireless connectivity, this detailed tutorial will guide you through upgrading the guts to turn your corded mouse into a Bluetooth model. If you’re handy with a soldering iron and not afraid to hack apart the guts of a modern but inexpensive Bluetooth mouse, you should have no trouble digging right into this project. The end result is a modern mouse packed inside the casing of your old mouse–same old look and feel, brand new engine inside. Hit up the link below to check out the full tutorial. Retro Wireless Apple Mouse [via Lifehacker] HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks

    Read the article

  • Additional Drivers error installing in Ubuntu 12.04 (wireless internet and software modem)

    - by gabiro
    I've already search for similar problems but they are so different from mine. these are the drivers http://db.tt/qFZlD5JD I'm having problem with this Additional Drivers once I click the Activate button it will start in downloading and installing but after that it will say Installation failed. Then the "Enable Wireless" will not be available. With the Software Modem issue is the same problem with the Broadcom. These drivers are working on Ubuntu 9 and 11 if I'm not mistaken. Only on 12.04 is not working. One more thing these drivers will enable the Huawei E165g E220. I've already tried other solution for the Huawei to activate but all didn't work. After a restart Enable wireless becomes okay, though. To all Ubuntu experts and masters please I'm begging for help. A million Thank You!.

    Read the article

  • Apple wireless mouse and keyboard doens't work

    - by drigoSkalWalker
    I paired the mouse and keyboard on ubuntu, but it seems not work. I got this error in /var/log/syslog kernel: [ 1875.935712] input: Apple Magic Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/bluetooth/hci0/hci0:2/input34 kernel: [ 1875.935885] evdev: no more free evdev devices kernel: [ 1875.935893] input: failed to attach handler evdev to device input34, error: -23 kernel: [ 1875.936049] magicmouse 0005:05AC:030D.0003: input,hidraw0: BLUETOOTH HID v3.06 Mouse [Apple Magic Mouse] on 00:19:5D:0F:4A:F6 kernel: [ 2334.787710] input: Apple Wireless Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/bluetooth/hci0/hci0:4/input36 kernel: [ 2334.787729] evdev: no more free evdev devices kernel: [ 2334.787737] input: failed to attach handler evdev to device input36, error: -23 kernel: [ 2334.787999] generic-bluetooth 0005:05AC:0255.0005: input,hidraw1: BLUETOOTH HID v0.50 Keyboard [Apple Wireless Keyboard] on 00:19:5D:0F:4A:F6 Nothing appears in xinput --list, only the wired mouse and keyboard. How to fix that?

    Read the article

  • Why does my computer sometimes not identify my wireless network, or others, that it always connects to?

    - by Emile Erasmus
    I have a vista operating system. Sometimes my computer will not connect to the wireless network (internet) when I start up my laptop. This happens at different places on occasion, and it is very random. It tries to connect, but can not identify the network (it does recognize the wifi name). So at the end it connects, but with limited connectivity. It can not be the hardware because all other computers connect to it fine at the same time. And it happens at different places, mostly home, but sometimes at coffee shops, etc. And then in a day or two when I start up my laptop it is all of a sudden working again. (restart does not solve the problem). I have tried all the trouble shooting options windows offers, restarting the notebook, switch modem on and off, switch laptop wifi on and of, deleted the wifi memory from the laptop and reconnected with the password as if it was the first time, everything. If it does not work at one place it does not mean it won't work at another. Example it won't work at home, then I go to coffee shop and it works, then get back home and it don't. Anyone encountered this before?

    Read the article

  • Sony VAIO wireless card not connecting intel 4965AGN

    - by marcski55
    I'm running a Sony VAIO VGN-CR410E, and recently moved it to Ubuntu from Windows 7. Both my home and work networks (which I maintain) run WPA/WPA2-PSK authentication for security. My wireless network card (intel 4965AGN) will not connect to them unless I am in the same room (kind of defeats the purpose of wireless). The PC is 4 years old and the routers are brand new (last month or so). Had no problems with it with Win7, but Ubuntu just doesn't like the networks. As an IT manager, my laptop needs to work, so any help is appreciated. If this is a duplicate, please let me know of what. I've spent hours searching and nothing has worked. Thanks for your help. (This is my first experience fully relying on Ubuntu). I can see the networks and attempt connection, but it fails authentication. Let me know of any code you need.

    Read the article

  • How to configure Windows 2008 R2 server for LAN and wireless internet connections

    - by Alchemical
    For special testing purposes, we need a Windows server to allow the following: A team member can log in remotely to the server. When remotely logged in, they can disconnect the wireless connection, perform a few tests, and then reconnect the wireless connection. In general, the LAN connection would just be used for the remote login, the wireless connection would be used for performing tests including using a web browser to test certain web sites, etc. How can we successfully configure the server to support 2 network connections like this? (A regular LAN connection + a wireless connection). And also make sure that the tests we perform using the browser utilize the wireless connection for the outgoing internet activity.

    Read the article

  • How to Make Your Verizon FIOS Router 1000% More Secure

    - by The Geek
    If you’ve just switched to Verizon FIOS and they’ve installed the new router in your house, there’s just one problem: it’s set to use lousy WEP encryption by default, instead of the much more secure WPA2. Here’s how to fix it. The problem with WEP encryption is that it can be cracked really easily—a skilled hacker can do it in a few minutes, and even an unskilled geek can do it in just a little more time with the right tools. Once they’ve done that, they can leech off your internet connection and do anything they want—including illegal stuff coming from your network. Note: if you are using an old Nintendo DS connected to the internet, they usually only support WEP encryption, so you may not want to do this Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor The Spam Police Parts 1 and 2 – Goodbye Spammers [Videos] Snow Angels Theme for Windows 7 Exploring the Jungle Ruins Wallpaper Protect Your Privacy When Browsing with Chrome and Iron Browser Free Shipping Day is Friday, December 17, 2010 – National Free Shipping Day Find an Applicable Quote for Any Programming Situation

    Read the article

  • Poor home office network performance and cannot figure out where the issue is

    - by Jeff Willener
    This is the most bizarre issue. I have worked with small to mid size networks for quite a long time and can say I'm comfortable connecting hardware. Where you will start to lose me is with managed switches and firewalls. To start, let me describe my network (sigh, shouldn't but I MUST solve this). 1) Comcast Cable Internet 2) Motorola SURFboard eXtreme Cable Modem. a) Model: SB6120 b) DOCSIS 3.0 and 2.0 support c) IPv4 and IPv6 support 3-A) Cisco Small Business RV220W Wireless N Firewall a) Latest firmware b) Model: RV220W-A-K9-NA c) WAN Port to Modem (2) d) vlan 1: work e) vlan 2: everything else. 3-B) D-Link DIR-615 Draft 802.11 N Wireless Router a) Latest firmware b) WAN Port to Modem (2) 4) Servers connected directly to firewall a) If firewall 3-A, then vlan 1 b) CAT5e patch cables c) Dell PowerEdge 1400SC w/ 10/100 integrated NIC (Domain Controller, DNS, former DHCP) d) Dell PowerEdge 400SC w/ 10/100/1000 integrated NIC (VMWare Server) 4) Linksys EZXS88W unmanaged Workgroup 10/100 Switch a) If firewall 3-A, then vlan 2 b) 25' CAT5e patch cable to firewall (3-A or 3-B) c) Connects xBox 360, Blu-Ray player, PC at TV 5) Office equipment connected directly to firewall a) If firewall 3-A, then vlan 1 b) ~80' CAT6 or CAT5e patch cable to firewall (3-A or 3-B) c) Connects 1) Dell Latitude laptop 10/100/1000 2) Dell Inspiron laptop 10/100 3) Dell Workstation 10/100/1000 (Pristine host, VMWare Workstation 7.x with many bridged VM's) 4) Brother Laser Printer 10/100 5) Epson All-In-One Workforce 310 10/100 5-A) NetGear FS116 unmanaged 10/100 switch a) I've had this switch for a long time and never had issues. 5-B) NetGear GS108 unmanaged 10/100/1000 switch a) Bought new for this issue and returned. 5-C) Linksys SE2500 unmanaged 10/100/1000 switch a) Bought new for this issue and returned. 5-D) TP-Link TL-SG10008D unmanaged 10/100/1000 a) Bought new for this issue and still have. 6) VLan 1 Wireless Connections (on same subnet if 3-B) a) Any of those at 5c b) HP Laptop 7) VLan 2 Wireless Connection (on same subnet if 3-B) a) IPad, IPod b) Compaq Laptop c) Epson Wireless Printer Shew, without hosting a diagram I hope that paints a good picture. The Issue The breakdown here is at item 5. No matter what I do I cannot have a switch at 5 and have to run everything wireless regardless of router. Issues related to using a switch (point 5 above) SpeedTest is good. Poor throughput to other devices if can communicate at all. Usually cannot ping other devices even on the same switch although, when able, ping times are good. Eventual lose of connectivity and can "sometimes" be restored by unplugging everything for several days, not minutes or hours but we're talking a week if at all. Directly connect to computer gives good internet connection however throughput to other devices connected to firewall is at best horrible. Yet printing doesn't seem to be an issue as long as they are connected via wireless. I have to force the RV220W to 1000Mb on the respective port if using a Gig Switch Issues related to using wireless in place of a switch (point 5 above) Poor throughput to other devices if can communicate. SpeedTest is good. Bottom line Internet speeds are awesome. By the way, Comcast went WAY above and beyond to make sure it was not them. They rewired EVERYTHING which did solve internet drops. Computer to computer connections are garbage Cannot get switch at 5 to work, yet other at 4 has never had an issue. Direct connection, bypass switch, is good for DHCP and internet. DNS must be on server, not firewall. Cisco insists its my switches but as you can see I have used four and two different cables with the same result. My gut feeling is something is happening with routing. But I'm not smart enough to know that answer. I run a lot of VM's at 5-c-3, could that cause it? What's different compared to my previous house is I have introduced Gigabit hardware (firewall/switches/computers). Some of my computers might have IPv6 turned on if I haven't turned it off already. I'm truly at a loss and hope anyone has some crazy idea how to solve this. Bottom line, I need a switch in my office behind the firewall. I've changed everything. The real crux is I will find a working solution and, again, after days it will stop working. So this means I cannot isolate if its a computer since I have to use them. Oh and a solution is not throwing more money at this. I'm well into $1k already. Yah, lame.

    Read the article

  • connecting two routers

    - by lee
    I have two routers, both wireless, that i wish to connect together. As it stands Router A is connected via a micro filter into the phone line which i access the web wirelessly. What I want to achieve is to connect Router B to A so I can hardwire My TV and Sky (cable) Box into B and simultaneously browse the web wirelessly via router A. Is this possible? If so I'd appreciate the help on this one to save me running 50ft cable under the carpet!!! PS I'm using Mac OS.

    Read the article

  • I have too many DNS servers configured

    - by Jon Will
    I have my laptop connecting to my wireless router, and I have told the router to issue out DNS via the DHCP lease. The laptop is configured to use the information. The router is configured to only issue two DNS server addresses from open dns, but the laptop reports Networking Dns Servers: 10.197.100.1 10.197.100.2 10.197.100.3 8.8.8.8 8.8.4.4 208.67.222.222 208.67.220.220 I have no idea where the laptop is getting these additional IPs as DNS. Please advise.

    Read the article

  • Configuring port forwarding for SSH - no response outside LAN [migrated]

    - by WinnieNicklaus
    I recently moved, and at the same time purchased a new router (Linksys E1200). Prior to the move, I had my old router set up to forward a port for SSH to servers on my LAN, and I was using DynDNS to manage the external IP address. Everything worked great. I moved and set up the new router (unfortunately, the old one is busted so I can't try things out with it), updated the DynDNS address, and attempted to restore my port forwarding settings. No joy. SSH connections time out, and pings go unanswered. But here's the weird part (i.e., key to the whole thing?): I can ping and SSH just fine from within this LAN. I'm not talking about the local 192.168.1.* addresses. I can actually SSH from a computer on my LAN to the DynDNS external address. It's only when the client is outside the LAN that connections are dropped. This surely suggests a particular point of failure, but I don't know enough to figure out what it is. I can't figure out why it would make a difference where the connections originate, unless there's a filter for "trusted" IP addresses, which is perhaps just restricted to my own. No settings have been touched on the servers, and I can't find any settings suggesting this on the router admin interface. I disabled the router's SPI firewall and "Filter anonymous traffic" setting to no avail. Has anyone heard of this behavior, and what can I do to get past it?

    Read the article

  • How to access an IP address as if on a different network using SSH

    - by NT3RP
    In preparation for a lengthy business trip, I set up my router such that I can access my home computer over the internet via port forwarding over SSH. One thing I neglected to do was setup access to my router remotely. Normally, I can just access the router configuration page via 192.168.1.1. I know that it's possible to tunnel traffic through SSH, but how do I access an IP address as if I were on my home network using SSH?

    Read the article

  • Configuring port forwarding for SSH - no response outside LAN

    - by WinnieNicklaus
    I recently moved, and at the same time purchased a new router (Linksys E1200). Prior to the move, I had my old router set up to forward a port for SSH to servers on my LAN, and I was using DynDNS to manage the external IP address. Everything worked great. I moved and set up the new router (unfortunately, the old one is busted so I can't try things out with it), updated the DynDNS address, and attempted to restore my port forwarding settings. No joy. SSH connections time out, and pings go unanswered. But here's the weird part (i.e., key to the whole thing?): I can ping and SSH just fine from within this LAN. I'm not talking about the local 192.168.1.* addresses. I can actually SSH from a computer on my LAN to the DynDNS external address. It's only when the client is outside the LAN that connections are dropped. This surely suggests a particular point of failure, but I don't know enough to figure out what it is. I can't figure out why it would make a difference where the connections originate, unless there's a filter for "trusted" IP addresses, which is perhaps just restricted to my own. No settings have been touched on the servers, and I can't find any settings suggesting this on the router admin interface. I disabled the router's SPI firewall and "Filter anonymous traffic" setting to no avail. Has anyone heard of this behavior, and what can I do to get past it?

    Read the article

  • How to forward UDP Wake-on-Lan port to broadcast IP with IPTABLES?

    - by Nazgulled
    I'm trying to setup Wake-on-Lan for some of the LAN computers at home and it seems that I need to open a UDP port (7 or 9 being the most common) and forward all requests to the broadcast IP, which in my case is 192.168.1.255. The problem is that my router does not allow me to forward anything to the broadcast IP. I can connect to my router through telnet and it seems this router uses IPTABLES, but I don't know much about it or how to is. Can someone help me out with the proper iptables commands to do what I want? Also, in case it doesn't work, the commands to put everything back would be nice too. One last thing, rebooting the router will keep those manually added iptables entries or I would need to run them every time?

    Read the article

  • How can I set my wireless router to run on a time schedule?

    - by Joshua Robison
    I have a Buffalo AirStation WZR-HP-G301NH I am able to access it's settings via 192.168.11.1 I'm connecting wirelessly with toshiba i686 laptop on Linux Mint Debian with service pack 3 and i686 dual core kernel This is just my home network but I know that there must be a way for large industries to shut their networks down or lock out their network access temporarily based on a time schedule, automatically. Like mon - fri the network provides access from 8am to 10pm and then automatically shuts down. I want this to affect all the computers accessing this netowork... basically all my families computers so that the internet just automatically shuts down at bedtime. I am running Linux Mint Debian and so maybe I need to make a cron job or something but does anyone know how big industries implement this and how I can do it privately? TIA

    Read the article

  • Zyxel p-2602HW-1DA - LAN to WAN routing problems

    - by Garrett
    Hi Got a new router yesterday (due to new internet supplier) and now all my requests for my own server (local lan) is routed directly to the router instead of the server, when using dns. Ex. I have a website www.mysite.org running on my server at home (local lan). From work I can access it via www.mysite.org, which is great. But from home (local lan) my request's for www.mysite.org gets rerouted to the routers web admin interface My last router didn't do this. My new router is a Zyxel P-2602HW-1DA, my old one was a LinkSys WRT-54GC V. 2.0. There's a rather wierd WAN-LAN, WAN-WAN setup interface which I cant really comprehend yet and the docs are rather vague. Have anyone had the same problem and can anyone guide me to a solution, would nice not write the ip address everytime i need to access the server on local lan. :). Kind regards Garrett

    Read the article

  • Port forwarding on D-Link DIR-615 super-slow, useless

    - by Jaroslav Záruba
    Hello I have replaced my old router with DIR-615 from D-Link, and now the port forwarding is so slow it makes the router practically useless for requests coming from outside of my network. Accessing the router itself (admin UI) from outside is without any issues, no delay whatsoever. But when I try to access a service residing on any of the computers in my network from outside the requests take minutes and minutes. (E.g. I can see source of my GWT-app main page, but loading additional CSS and JS files takes years.) If anyone could recommend any further diagnostics I should do to figure out what is happening it would be great. Few notes: happens with more services (web-app on Tomcat, viewing directory index via Apache) it does not make a difference whether the service is hosted on wired or wireless PC accessing the service on a localhost works fine, as does any 'inner' communication turning off firewall on target PC does not make difference either (makes sense) when I replace this router with the old one (both 192.168.1.1) everything works fine I see nothing suspicious in the router's log I believe I have the latest firmware (4.11) DIR-615 sucks, it already died once completely Regards Jarda Z.

    Read the article

  • Connecting my XBOX 360 to home network

    - by patrick
    I am trying to set up my XBOX 360 as a Windows Media Center Extender. I input the code as shown on the XBOX screen, but I get the error message: "Cannot Set Up Extender." This means that the Extender was found (there's a separate error msg for extender not found), however it can't be set up. Windows points me to this page which tells me to change my router settings to enable multicast and UPnP. My router doesn't have those specific settings but I did open all ports for the XBOX. What is odd about this problem is that it did work, then I restarted my computer and didn't change any settings, and now it doesn't work. I guess something did change, but I can't figure out anything else to try after opening all ports. I'm running Windows 7 and the router is fairly recent (I bought it about six months ago) so it should be able to handle this. The router firmware is up to date.

    Read the article

  • Windows 7 Internet Sharing - How to have simultaneous Internet Access to my client

    - by Marl
    The condition: I'm running on windows 7, I'm using a usb broad band for my computer, then my computer is connected to the router tp-link tl-wr340g (in this sense my computer is the internet source since my router has no usb port for this type of broad band). I set the broad band to have internet sharing. I got 3-4 client connected through the router. The problem is whenever a client is using the internet, other clients including me don't have internet connection, additionally, If I have the internet access other clients don't have internet access. In my setup in windows XP (bridging the broad band and the router network) it works perfectly fine, every one has simultaneous internet. To clarify, how can I have all clients including me have internet connection simultaneously in my windows 7 OS? //Additionally, the create "network bridge" setup is missing, from this link the "Bridge Connection is missing", how can I fix that?

    Read the article

  • Devices on one switch can't see devices on another switch

    - by jockey69
    I have RoadRunner Internet cable service hooked to a Motorola Surfboard modem. This is connected to a 10/100 wireless router (located in the garage). Downstairs, I have a ZyXEL GS-108b gigabit switch connected to one port on the router. From this switch I ran connections to a PS3, DVR, Vonage box and a wireless router (Buffalo AirStation 10/100). The Buffalo AirStation works as a wireless AP for other laptops, iPads and cell phones. Upstairs, I have an Asus gigabit switch connected to a gaming desktop, printer, and a media server on FreeNAS (PS3 Media Server on FreeNAS). The router is configured to assign static IPs to both the PS3 and the media server. Problem - I connect a laptop to the switch downstairs after disabling the wireless, thus making sure that I am accessing internet through the wired connection (and the router in the garage). All my computers, iPads and cell phones are able to connect to the internet without a problem. My PS3 connects to the interent with a wired connection but is unable to access the media server (I get a message that no media server is found). I used a wired laptop downstairs (connected to switch downstairs) but am unable to ping either the PS3 or media server! I may be doing something silly but am at my wits' end. Please help!

    Read the article

  • Sharing files between 2 different routers

    - by Chris
    I realize this has been asked before and I have read as much as I could find on the topic but I still need help with this because there are so many different approaches and the ones I am trying aren't working. So I have 2 routers, lets call them A and B. Both have a wireless feature and are active. A is in the basement and receives the internet. There is a TV on the ground floor that is connected to A through an ethernet wire. B is upstairs and gets the internet from A through an ethernet wire. Connected to B, is a desktop running Plex Media Server. What I want to do is make sure devices connected to both routes can access the Plex Media Server. So what I have read is that I should plug in the ethernet wire connecting B to a into a LAN port instead of the WAN port. After that I should turn off DHCP. I have tried this and B stops receiving internet. What am I doing wrong? Another thing I have read is to use Router B in bridge mode but Router B is running openwrt and I have QoS on it so gaming/VoIP/browsing is unaffected by heavy downloading/uploading. I would prefer to keep this active. I realize it might be ineffective if a device in Router A is doing some hardcore downloading but all that stuff is done on Router B anyway so it doesn't matter. Router A can't get openwrt because it is a shitty one provided by Bell. So, how do I proceed with this?

    Read the article

  • How can private IPV4 addresses get past iptables NAT (tcp RST,FIN)

    - by gscott
    I've got a router performing simple NAT translation using iptables iptables -t nat -o -j MASQUERADE This works fine almost all of the time except for one particular case where some TCP RST and FIN packets are leaving the router un-NAT'd. In this scenario I setup 1 or 2 client computers streaming Flash video (eg www.nasa.gov/ntv) At the router I then tear down and re-establish the public interface (which is a modem) As expected the Flash streams stall out. After the connection is re-established and I try to refresh the Flash pages, I see some TCP RST and [FIN,ACK] packets leaving the public interface (I assume as Flash attempts to recover its stream). I don't know how these packets can leave the router non-NAT'd

    Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >