Search Results

Search found 42195 results on 1688 pages for 'working'.

Page 70/1688 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

  • Forwarding RDP via a Linux machine using iptables: Not working

    - by Nimmy Lebby
    I have a Linux machine and a Windows machine behind a router that implements NAT (the diagram might be overkill, but was fun to make): I am forwarding RDP port (3389) on the router to the Linux machine because I want to audit RDP connections. For the Linux machine to forward RDP traffic, I wrote these iptables rules: iptables -t nat -A PREROUTING -p tcp --dport 3389 -j DNAT --to-destination win-box iptables -A FORWARD -p tcp --dport 3389 -j ACCEPT The port is listening on the Windows machine: C:\Users\nimmy>netstat -a Active Connections Proto Local Address Foreign Address State (..snip..) TCP 0.0.0.0:3389 WIN-BOX:0 LISTENING (..snip..) And the port is forwarding on the Linux machine: # tcpdump port 3389 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 01:33:11.451663 IP shieldsup.grc.com.56387 > linux-box.myapt.lan.ms-wbt-server: Flags [S], seq 94663035, win 8192, options [mss 1460], length 0 01:33:11.451846 IP shieldsup.grc.com.56387 > win-box.myapt.lan.ms-wbt-server: Flags [S], seq 94663035, win 8192, options [mss 1460], length 0 However, I am not getting any successful RDP connections from the outside. The port is not even responding: C:\Users\outside-nimmy>telnet example.com 3389 Connecting To example.com...Could not open connection to the host, on port 3389: Connect failed Any ideas? Update Per @Zhiqiang Ma, I looked at nf_conntrack proc file during a connection attempt and this is what I see (192.168.3.1 = linux-box, 192.168.3.5 = win-box): # cat /proc/net/nf_conntrack | grep 3389 ipv4 2 tcp 6 118 SYN_SENT src=4.79.142.206 dst=192.168.3.1 sport=43142 dport=3389 packets=6 bytes=264 [UNREPLIED] src=192.168.3.5 dst=4.79.142.206 sport=3389 dport=43142 packets=0 bytes=0 mark=0 secmark=0 zone=0 use=2 2nd update Got tcpdump on the router and it seems that win-box is sending an RST packet: 21:20:24.767792 IP shieldsup.grc.com.45349 > linux-box.myapt.lan.3389: S 19088743:19088743(0) win 8192 <mss 1460> 21:20:24.768038 IP shieldsup.grc.com.45349 > win-box.myapt.lan.3389: S 19088743:19088743(0) win 8192 <mss 1460> 21:20:24.770674 IP win-box.myapt.lan.3389 > shieldsup.grc.com.45349: R 721745706:721745706(0) ack 755785049 win 0 Why would Windows be doing this?

    Read the article

  • "I/O Error Occurred" in vSphere Client working with ESXi

    - by Chris
    I have a datastore set up in ESXi where I put all my ISOs. Somehow, something broke (I don't know what) and now I can't upload files to that (or any other) datastore. For large, ISO-sized files, the "Uploading..." dialog pops up, hangs for a while, and then the "I/O Error Occurred" displays. For smaller files (10 meg neighborhood), the "Uploading..." dialog comes up, a progress bar starts going, and it estimates a time remaining. Then it hangs at 1 second remaining for a while, and the same "I/O Error Occurred" comes up. Has anyone seen a problem like this?

    Read the article

  • Apache2 VirtualHost on Debian not working

    - by milo5b
    I am having some problems with Apache2 configuration. I have already tried to look for documentation on the web (Apache's site, Debian's site, here on serverfault, etc), but nothing really helps. I have tried different configurations, but my current configuration is the following (/etc/apache2/sites-available/default): <VirtualHost *:80> ServerAdmin [email protected] ServerName mysite.dev ServerAlias mysite.dev DocumentRoot /var/www/mysite.dev/httpdocs/ ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName livesite.com ServerAlias www.livesite.com DocumentRoot /var/www/livesite.com/httpdocs/ <Directory /var/www/livesite.com/httpdocs/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> mysite.dev it's just an entry in hosts file on my client machine, while livesite.com it's an actual DNS record which would resolve to the same IP as the IP set in hosts file for mysite.dev. The problem is that when i try to type mysite.dev in my browser, it would automatically go to livesite.com. I tried to have different /etc/apache2/sites-enabled/ files (/etc/apache2/sites-enabled/mysite.dev , /etc/apache2/sites-enabled/livesite.com ) - and of course with the actual sites-available related files, but achieving the same results. I have tried to have a peak on error.log and access.log but there's nothing I can see. My httpd.conf contains: AccessFileName .htaccess And I have no /etc/apache2/conf.d/virtual.conf file. Any help would be greatly appreciated - if I did not provide enough info please let me know I will do my best to provide all necessary info. Thanks

    Read the article

  • mod_cache not working

    - by Pistos
    I have a PHP site that has many dynamically generated pages. I'm trying to turn to mod_cache to help boost performance, because in most cases, content does not change in a given day. I have configured mod_cache as best I could, following examples around the web, including the mod_cache page on apache.org. When I set LogLevel debug, I see a bit of information about the caching that is [not] happening. There are plenty of pairs of lines like this: [Fri Jun 01 17:28:18 2012] [debug] mod_cache.c(141): Adding CACHE_SAVE filter for /foo/bar [Fri Jun 01 17:28:18 2012] [debug] mod_cache.c(148): Adding CACHE_REMOVE_URL filter for /foo/bar Which is fine, because I've set CacheEnable disk /foo, to indicate that I want everything under /foo cached. I'm new to mod_cache, but my understanding about these lines is that it just means that mod_cache has acknowledged that the URL is supposed to be cached, but there are supposed to be more lines indicating that it is saving the data to cache, and then later retrieving them on subsequent hits to the same URL. I can hit the same URL till I'm blue in the face, whether with F5 refreshing, or not, or with different browsers, or different computers. It's always that pair of lines that shows in the logs, and nothing else. When I set CacheEnable disk /, then I see more activity. But I don't want to cache the entire site, and there are many, many different subpaths to the site, so I don't want to have to modify code to set no-cache headers in all the necessary places. I'll mention that mod_rewrite is in use here, rewriting /foo/bar to something like index.php?baz=/foo/bar, but my understanding is that mod_cache uses the pre-rewrite URL, not the post-rewrite URL. As far as I can tell, I have the response headers not getting in the way of caching. Here's an example from one hit: Cache-Control:must-revalidate, max-age=3600 Connection:Keep-Alive Content-Encoding:gzip Content-Length:16790 Content-Type:text/html Date:Fri, 01 Jun 2012 21:43:09 GMT Expires:Fri, 1 Jun 2012 18:43:09 -0400 Keep-Alive:timeout=15, max=100 Pragma: Server:Apache Vary:Accept-Encoding mod_cache config is as follows: CacheRoot /var/cache/apache2/ CacheDirLevels 3 CacheDirLength 2 CacheEnable disk /foo What is getting in the way of mod_cache doing its job of caching?

    Read the article

  • Proxy Settings per Machine not working on windows server 2008 R2 SP1

    - by Anirudh Goel
    i have a very interesting problem and would appreciate any help for it. In my scenario i have scripts which bring up a VM inside a domain. Now i want to enable internet access for all the VM's and they go through a proxy. I interact with the VM's using remote sessions and use the credentials of a user which belogs to the domain administrator group. Now problem is that, i create VM's on the fly and destroy them as well,and the scripts i run during their lifetime require internet access on them.So i cannot statically set the proxy settings thus i used the option of Active Directory Group Policy Management. I initially used the "User Configuration" option and set the proxy, which worked like a charm when ever i log inside the machine. However it doesn't work if i use to remote login to the machine with an account which has not yet logged in to the machine. So i used this link to configure it to work on Per Machine, the group policy has worked fine and it reflects in the browser too. But i am not able to resolve any dns name like http://www.google.com or any internet based site. Any idea what i can do?

    Read the article

  • echo newline character not working in bash

    - by Bashuser
    I have bash script which has lots of echo statements and also I aliased echo to echo -e both in .bash_profile and .bashrc, so that new lines are printed properly for a statement like echo 'Hello\nWorld' the output should be Hello World but the output I am getting is Hello\nWorld I even tried using shopt -s expand_aliases in the script, it doesn't help I am running my script as bash /scripts/scriptnm.sh; if I run it as . /scripts/scriptnm.sh I am getting the desired output...

    Read the article

  • newsubtitles line not working in FFmpeg

    - by godMode
    i'm trying to run the following line on FFmpeg that will basically "re-format" an MKV file to MP4 without doing any re-encoding and also embed SRT subtitles onto the MP4 output: ffmpeg -i test.mkv -i test.srt -newsubtitle -acodec copy -vcodec copy test.mp4 Without the "-i test.srt -nwesubtitle" bit, it seems to work just fine; however, with it I get the following output: Seems stream 0 codec frame rate differs from container frame rate: 47.95 (5000000/104271) - 23.98 (24000/1001) Stream #0.0(eng): Video: h264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc Stream #0.1(eng): Subtitle: 0x0000 Metadata: title : English Stream #0.2(jpn): Audio: aac, 48000 Hz, stereo, s16 Metadata: title : Japanese 2.0 Stream #0.3(eng): Audio: aac, 48000 Hz, stereo, s16 Metadata: title : English 2.0 Stream #0.4(eng): Subtitle: 0x0000 Metadata: title : English Songs & Signs Stream #0.5: Attachment: 0x0000 Metadata: filename : MyriadPro-Bold.ttf Stream #0.6: Attachment: 0x0000 Metadata: filename : MyriadPro-RegularHaruhi.ttf Stream #0.7: Attachment: 0x0000 Metadata: filename : ChaparralPro-BoldIt.ttf Stream #0.8: Attachment: 0x0000 Metadata: filename : ChaparralPro-SemiboldIt.ttf Stream #0.9: Attachment: 0x0000 Metadata: filename : epmgobld_ending.ttf Stream #0.10: Attachment: 0x0000 Metadata: filename : epminbld_opening.ttf Stream #0.11: Attachment: 0x0000 Metadata: filename : Folks-Bold.ttf Stream #0.12: Attachment: 0x0000 Metadata: filename : GosmickSansBold.ttf Stream #0.13: Attachment: 0x0000 Metadata: filename : WarnockPro-LightDisp.ttf Stream #0.14: Attachment: 0x0000 Metadata: filename : epmgobld_ending.ttf Stream #0.15: Attachment: 0x0000 Metadata: filename : GosmickSansBold.ttf Stream #0.16: Attachment: 0x0000 Metadata: filename : Marker SD 1.2.ttf Stream #0.17: Attachment: 0x0000 Metadata: filename : MyriadPro-Bold.ttf Stream #0.18: Attachment: 0x0000 Metadata: filename : MyriadPro-RegularHaruhi.ttf Stream #0.19: Attachment: 0x0000 Metadata: filename : MyriadPro-SemiCn.ttf test.srt: Invalid data found when processing input I tried adding "-r pal", "-r ntsc" or "-r 23.98" thinking it was framerate issue with no change.

    Read the article

  • asp:FileUpload not working in UpdatePanel

    - by James123
    asp:FileUpload control is not working in update panel in ascx control. Why? any work around. <span dir="ltr"> <asp:FileUpload ID="InputFile" runat="server" class="ms-fileinput" size="35" /> </span> and also I added <Triggers> <asp:PostBackTrigger ControlID="btnOK" /> </Triggers> Still it is not working.

    Read the article

  • Exchange 2003 and Outlook rule: Send auto reply message not working

    - by Mestika
    Hi, I have created a distributed group which have to send a auto reply when receiving a mail. I know that it is impossible to send a auto reply within a distributed group, but following a guide I have created a mail account called “noreply”. In outlook I have created a rule in the “noreply” account where I chose following conditions: Send to a person or distributed list (where I selected my distributed group) Then to specify what to do with that message I selected Have server reply using a specific message I’ve created my message and saved it. But when I try to write an e-mail to the distributed group it doesn’t send back the reply message. Does anyone knows what I’m doing wrong? Sincerely Mestika

    Read the article

  • keepass not working with wine

    - by Decio Lira
    I installed Keepass 1.16 in my thumbdrive, which reportedly works with wine (as per Keepass homepage), but after entering the master password it just hangs and shows the "The program keepass has encountered a serious problem and needs to close" screen. I got this error msg among the stack trace on the terminal: wine: Call from 0x7b844633 to unimplemented function bcrypt.dll.BCryptOpenAlgorithmProvider, aborting On windows, everything runs fine. I'm using wine-1.1.27 on ubuntu 9.04 Any thoughts?

    Read the article

  • advice on working on remote asp.net applications

    - by Jonesy
    Hi folks, I'm a (relatively new) developer using asp.net with VB.NET. Currently all my applications are developed on my PC and then are built and moved onto the web server. I'm going to be working remotely for 3 months in which time I'll be connecting to the company network via VPN. What is the best way to access my projects? I need to have the projects stored on the company network so that others can access them too. So simply copying the projects to my laptop, working on them, then copying them back won't suffice. I tried to just open the projects off of the network share but am getting application trust problems. I'm just wondering what other developers do in this situation? Jonesy

    Read the article

  • Num Lock not working

    - by Luke
    On my laptop (Dell Inspiron 1525), when ever I press Num Lock, they keys which you would normally press to get numbers with num lock on, only show up as letters. I've tried pressing function instead of num lock, but that doesn't work either. Can Any Body Help?

    Read the article

  • Netsh commands not working on remote computer

    - by Mike Christiansen
    Hello, At work, we are in the process of migrating over 200 computers from static IPs to DHCP. The DHCP server is configured. My biggest hurdle is physically going to every single computer in the area and configuring them all for DHCP. I am trying to use netsh to accomplish this. However, I cannot even seem to set one computer to DHCP remotely. The command I am trying is: netsh -r COMPUTERNAME interface ip set address name="Local Area Connection" source=dhcp netsh -r COMPUTERNAME interface ip set dns name="Local Area Connection" source=dhcp This results in the error The following command was not found: interface ip set address "name=Local Area Connection" source=dhcp. Any ideas?

    Read the article

  • simple apache2 reverse proxy setup not working

    - by Nick
    I know what proxy is (very high level), it's just I have never set up one, and it feels like I might be missing some big fat point here. My setup: client server (static IP), runs apache on port 80 proxy (has 2 network cards, one is on the clients network, the other one with a static IP on the server network), runs apache on port 80 I am trying to configure these three machines so that when client requests: http://proxy/machine1 It gets served server's pages at server root URL, i.e. http://server/ I can access client pages just fine. However, when I try accessing a page from the client machine, it simply gets redirected to server's IP address, which it clearly can't access since they are not on the same network: ... <meta http-equiv="REFRESH" content="0;url=http://server/machine1"></meta> <title>Redirect</title> ... My apache2 config is: LoadModule proxy_module /modules/mod_proxy.so LoadModule proxy_http_module /modules/mod_proxy_http.so ProxyRequests off <Proxy *> Order Allow,Deny Allow from all </Proxy> ProxyPass /machine1 http://server:80 <Location /machine1> ProxyPassReverse / </Location> What gives? Thanks!

    Read the article

  • Debian 6 Internet connection sharing aka IP masquerade not working

    - by Rautamiekka
    The problem: the computers [Xbox 360 and a Kubuntu 12.04.1 laptop] can't access Internet through a recently-installed desktopless Debian 6 laptop (which is wirelessly connected to a WLAN station) but addresses are successfully given by dnsmasq. The attempts: 1.1) /etc/dnsmaq.conf conffed according to http://wiki.debian.org/HowTo/dnsmasq: add lines interface=eth0 dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h 1.2) Follow http://www.cyberciti.biz/faq/rhel-fedora-linux-internet-connection-sharing-howto/ and use their script to setup iptables. 2) Follow the Ubuntu Internet Gateway Method (iptables) at https://help.ubuntu.com/community/Internet/ConnectionSharing recommended and which worked at Share internet in Linux. The Debian laptop was rebooted many times and between each attempt, with and without the script auto-executing via /etc/rc.local. While adding the iptables-restore command to that file I disabled the script.

    Read the article

  • Metro Apps on Win 8 aren't working with static ip behind auth proxy

    - by Kamal
    In Windows 8 Professional, Metro Apps and Windows Update do not work on static IP settings behind authenticated proxy server. They work on DHCP on the same proxy settings. (We have DHCP for wifi and static IP for LAN, both using the same proxy server). IE, Chrome and other desktop apps work nicely on both. Metro apps worked on an auth proxy (DHCP only), when I changed their proxy settings from the 'edit group policy' option. (StartSettingsEdit Group PolicyComputer ConfigurationAdministrative TemplatesNetwork IsolationInternet Proxy for Apps) Can this be fixed?

    Read the article

  • Code working in jsFiddle but not in browser...

    - by Jascination
    I'm trying to run the following code, written on my local machine: http://www.jsfiddle.net/WShdx/3/ Functionality-wise (ignore the broken images in the previous and next buttons, and the wrongly-sized main images) the click/hover function is working properly in jsfiddle. However, on my local machine it's not working at all. For all intents and purposes the code is identical, except the local copy has this head section to load in the javascript/css files that are contained within the jsfiddle page: <head> <title>Jquery Wizard</title> <link href="style.css" rel="stylesheet" type="text/css" /> <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.4/jquery.min.js"></script> <script src="wizard.js" type="text/javascript" ></script> </head> Is there some wonderful function of jsFiddle that is making my code magically work, or am I missing something here?

    Read the article

  • DVD ROM is not working

    - by Cyril N.
    (note: I don't know in which StackExchange site to put this question, I'll thank the moderator that will move it to a more appropriate place, if there is a S.E. available for my question). I have a DVD RW drive that is well listed in the bios, and if no CD is in, it is also present in the "My Computer" of my Fedora 16. But when I put a disc on it, the icon disapear from "My Computer", and I can not do anything with this ! (Like erasing a RW disc). I'd like to boot a Fedora 17 Live CD image. I burned it on an other computer but when I try to run it in bios, nothing is done and I'm redirected to Grub of my HD. The command cdrecord -scanbus shows this : wodim: Warning: controller returns wrong size for CD capabilities page. wodim: Cannot get CD capabilities data. 6,1,0 601) 'HD-DT%ST' 'DVD%RAM G@22NP20' '1&04' Removable CD-ROM And when I try to mount manually the disc, I got this error : mount: block device /dev/sr0 is write-protected, mounting read-only mount: /dev/sr0: can't read superblock Here's a paste of dmesg | grep sr0 : [ 5.161265] sr0: scsi-1 drive [ 5.161621] sr 6:0:1:0: Attached scsi CD-ROM sr0 [ 834.545978] sr0: Hmm, seems the drive doesn't support multisession CD's [ 841.731194] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 842.021640] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 842.021652] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 842.021662] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 842.021672] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 [ 842.021688] end_request: I/O error, dev sr0, sector 0 [ 842.021697] Buffer I/O error on device sr0, logical block 0 [ 842.023715] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 843.048203] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 843.048211] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 843.048219] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 843.048234] end_request: I/O error, dev sr0, sector 0 [ 843.048274] EXT4-fs (sr0): unable to read superblock [ 843.063155] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 843.075904] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 843.220512] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 843.220522] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 843.220530] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 843.220538] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 843.220553] end_request: I/O error, dev sr0, sector 0 [ 843.220609] FAT-fs (sr0): unable to read boot sector The lines from Sense Key .. (line 6) to DRIVER_SENSE (line 11) are repeating a lot. I then changed my DVD player with an other spare one I had, and the disc didn't boot neither. I then changed the IDE cable, but still no success. What can I do to make it work? Thanks for your help.

    Read the article

  • IIS URl Rewrite working inconsistently?

    - by Don Jones
    I'm having some oddness with the URL rewriting in IIS 7. Here's my Web.config (below). You'll see "imported rule 3," which grabs attempts to access /sitemap.xml and redirects them to /sitemap/index. That rule works great. Right below it is imported rule 4, which grabs attempts to access /wlwmanifest.xml and redirects them to /mwapi/wlwmanifest. That rule does NOT work. (BTW, I do know it's "rewriting" not "redirecting" - that's what I want). So... why would two identically-configured rules not work the same way? Order makes no different; Imported Rule 4 doesn't work even if it's in the first position. Thanks for any advice! EDIT: Let me represent the rules in .htaccess format so they don't get eaten :) RewriteEngine On # skip existing files and folders RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] # get special XML files RewriteRule ^(.*)sitemap.xml$ /sitemap/index [NC] RewriteRule ^(.*)wlwmanifest.xml$ /mwapi/index [NC] # send everything to index RewriteRule ^.*$ index.php [NC,L] The "sitemap" rewrite rule works fine; the 'wlwmanifest' rule returns a "not found." Weird.

    Read the article

  • Minimum power requirement for VGA vs. its working

    - by Shiki
    Got a new XFX GTX260^2 video card. The only problem is the "Minimum power" is 500W on the box. I've got a Chieftec 450AA PSU with just a minimal number of attached stuff (1hdd, WD green; 6gb (4module) ram; dvd writer). Bought a cable for the 6pin power input on the card. Got picture, works in every aspect. Still. Should I get a new PSU (like a Corsair or Antec 600W)? Will the card perform slower with this PSU? (Yeah the last part is a particular question but in I'm also asking in generic. I was wondering about this so many times and I hope we'll put and end for this question for once and for all.)

    Read the article

  • nginx error page and internal directives not working as expected

    - by Romain
    I'd like to setup my nginx server to return a specific error page on HTTP 50x status codes, and I'd like this page to be unavailable by a direct request from users (e.g., http//mysite/internalerror). For that, I'm using nginx's internal directive, but I must be missing something, as when I put that directive on my /internalerror location, nginx returns a custom 404 error (which isn't even my own 404 error page) when a page crashes. So, to summarize, here's what seems to happen: GET /Home nginx passes the query to Python I'm simulating an application bug to get the 502 error code nginx tries to return /InternalError from its error_page rule because of the internal rule, it finally fails back to a custom 404 error code <-- why? the documentation says error_page directives are not concerned by internal: http://wiki.nginx.org/HttpCoreModule#internal Here's an extract from nginx.conf with a few comments to point things out: error_page 404 /NotFound; error_page 500 502 503 504 =500 /InternalError; # HTTP 500 Error page declaration location / { try_files /Maintenance.html $uri @pythonbackend; } location @pythonbackend { include uwsgi_params; uwsgi_pass unix:///tmp/uwsgi.sock; } location ~* \.(py|pyc)$ { # This internal location works OK and returns my own 404 error page internal; } location /__Maintenance.html { # This one also works fine internal; } location ~* /internalerror { # This one doesn't work and returns nginx's 404 error page when I trigger an error somewhere on my site internal; } Thanks very much for your help!!

    Read the article

  • Tar exclude not working?

    - by Andrew Fashion
    tar -cvf file.tar --exclude=thumbs/ \ --exclude=uploads_event/ \ --exclude=uploads_forum/ \ --exclude=uploads_admin/ \ --exclude=uploads_userpoints/ \ --exclude=uploads_group/ \ --exclude=up_old/ \ --exclude=uploads_user/ \ --exclude=uploads_wall/ \ directory_to_tar/ Do I have it wrong? Trying to tar entire directory but exclude all those directories and any files in those folders completely.

    Read the article

  • PureFTPd : ChrootEveryone not working

    - by Mistha Noobstha
    I have a fresh install of Ubuntu 12.04 with pure-ftpd version 1.0.35-1. I don't use database for the only user I have (ftpuser1 - localuser), but I want to lock him into his home directory. /ftp/ftpuser1 is the home dir of ftpuser1. /etc/pure-ftpd/conf/ChrootEveryone has the yes string and in /etc/default/pure-ftpd-common VIRTUALCHROOT is set to false, but ftpuser1 can freely walk around. My startup line for pure-ftpd looks like this : /usr/sbin/pure-ftpd -l pam -A -8 UTF-8 -O clf:/var/log/pure-ftpd/transfer.log -u 1000 -E -B So there is the "-A" in it for the ChrootEveryone.

    Read the article

  • Integrated Windows Authentication not working in IE only

    - by CoreyT
    In my site I have one folder that does not allow anonymous access. It is set up to use Integrated Windows Authentication as it is on an AD domain. The login works fine in Firefox, Chrome, even Safari, but not IE8. Has anyone encountered this before? I can't seem to find anyone else with a similar issue, except for where the login fails in all browsers of course.

    Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >