Search Results

Search found 29317 results on 1173 pages for 'device control'.

Page 700/1173 | < Previous Page | 696 697 698 699 700 701 702 703 704 705 706 707  | Next Page >

  • DVD wont mount Ubuntu 12.04

    - by CyborgGold
    I can't seem to be able to mount my optical drive. I have tried numerous solutions from this site with no results. I am not able to see the device inside the file browser either. There is a DVD in the drive. I am running 12.04 on an HP g60-235dx portable. I have a link below to the specs. I will also list what I have tried (that I can find back right now.) I know the drive is functioning, because just before Windows 7 crashed and my MBR went fubar I was watching movies just fine. I am fairly new to linux, so don't assume I know anything. Ok, so here is what I have tried: sudo wget --output-document=/etc/apt/sources.list.d/medibuntu.list http://www.medibuntu.org/sources.list.d/$(lsb_release -cs).list sudo apt-get --quiet update sudo apt-get --yes --quiet --allow-unauthenticated install medibuntu-keyring sudo apt-get --quiet update sudo apt-get install libdvdcss2 dmesg | grep sr0 (no output) apt-get install libdvdnav4 (already installed, and up to date) sudo /usr/share/doc/libdvdread4/install-css.sh ls -l /dev/cdrom /dev/cdrw /dev/dvd /dev/dvdrw /dev/scd0 /dev/sr0 ls: cannot access /dev/scd0: No such file or directory lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/cdrom -> sr0 lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/cdrw -> sr0 lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/dvd -> sr0 lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/dvdrw -> sr0 brw-rw----+ 1 root cdrom 11, 0 Sep 10 03:51 /dev/sr0 wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'TSSTcorp' 'CDDVDW TS-L633M' ------------------------------------------------------------------------- sudo lshw optical *-cdrom description: DVD-RAM writer product: CDDVDW TS-L633M vendor: TSSTcorp physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 0200 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc sudo lshw | grep cdrom *-cdrom logical name: /dev/cdrom Spec sheet for portable: http://www.cnet.com/laptops/hp-g60-235dx/4507-3121_7-33496192.html If you need any more information than all of that... please let me know.

    Read the article

  • Solutions for iOS collaborative sync (iCloud CoreData, CouchDB)?

    - by mluisbrown
    I'm developing an iOS app where one of the features will be allowing users to share and collaborate on data (e.g. lists). From everything I've read and based on the way that iCloud CoreData sync works I assume that it would not be a good fit for the following reasons, but I wanted to make sure I wasn't missing anything, as I'd prefer not to use a 3rd party syncing solution if at all possible: iCloud sync of any kind (CoreData, Document or Key / Value pairs) can only ever be between devices that use the same iCloud account, so it's designed for a single user syncing data over multiple devices. Any kind of collaborative sync (several people editing the same document / list) simultaneously would be limited to everyone have the same iCloud account. Cases of people sharing the same iCloud account is usually limited to, for example, husband and wife or similar close relationships for a small number of people. iCloud Core Data sync is for ensuring that each sync'd device has the same data. It doesn't seem to allow syncing just a subset of the data, so scenarios in which each user has their own documents and is only sharing / collaborating on a subset of them are not supported. And I'm not even mentioning the well document problems with iCloud CoreData syncing which may or may not have been resolved with iOS 7. Given the above, it would seem that CouchDB (with TouchDB) would be a better option, as it seems to support everything I need. What other options are there that people can recommend?

    Read the article

  • ubuntu 12.04 installer does not recognize drive partitions

    - by endless forms
    I recently purchased a new HP Pavilion HPE desktop running Windows 7. I am trying to install a dual-boot system with 12.04. However, when I run the LiveCD I only get as far as the "Install" window where you can select the partitions for your drives. On the bottom where it says "device for boot loader installation" I have "/dev/sda" and cannot select any other devices. All the options to change the drives are greyed out, most likely because there are no drives in the window. I partitioned my largest drive using the tools within Windows, then booted into the CD, but nothing shows up. I then used Gparted to change the new space from unallocated to an /ext2, and still nothing shows up. The installer does not recognize anything, but when I go into an Ubuntu session and use the disk utility manager I can see the partitions I made. Anything I do has to be done outside of the installer. I have no files on this new computer, so this is the perfect time to install a parallel OS. I would like avoid completely reinstalling Windows, however. I've been over the forums many times, but all the answers I've found have not worked for me. I also tried flagging the new, empty partition as boot, but that screwed Windows up. Also, the WUBI installer hits the same point and quits. I know that the disk itself is fine because I just made another dual boot system on a Gateway PC. This makes me think something within this computer is preventing the installer from "seeing" the drives. Any help would be much appreciated! Edit in response: The main part of the partitioning window shows no partitions, everything is blank. There is no way to add partitions, and all the buttons are useless. I've tried defragging my drive multiple times, and I also used the same disk to dual-boot another PC with no problems, so it's not the disk, it's definitely the computer.

    Read the article

  • CUDA 4.1 Update

    - by N0xus
    I'm currently working on porting a particle system to update on the GPU via the use of CUDA. With CUDA, I've already passed over the required data I need to the GPU and allocated and copied the date via the host. When I build the project, it all runs fine, but when I run it, the project says I need to allocate my h_position pointer. This pointer is my host pointer and is meant to hold the data. I know I need to pass in the current particle position to the required cudaMemcpy call and they are currently stored in a list with a for loop being created and interated for each particle calling the following line of code: m_particleList[i].positionY = m_particleList[i].positionY - (m_particleList[i].velocity * frameTime * 0.001f); My current host side cuda code looks like this: float* h_position; // Your host pointer. This holds the data (I assume it's already filled with the data.) float* d_position; // Your device pointer, we will allocate and fill this float* d_velocity; float* d_time; int threads_per_block = 128; // You should play with this value int blocks = m_maxParticles/threads_per_block + ( (m_maxParticles%threads_per_block)?1:0 ); const int N = 10; size_t size = N * sizeof(float); cudaMalloc( (void**)&d_position, m_maxParticles * sizeof(float) ); cudaMemcpy( d_position, h_position, m_maxParticles * sizeof(float), cudaMemcpyHostToDevice); Both of which were / can be found inside my UpdateParticle() method. I had originally thought it would be a simple case of changing the h_position variable in the cudaMemcpy to m_particleList[i] but then I get the following error: no suitable conversion function from "ParticleSystemClass::ParticleType" to "const void *" exists I've probably messed up somewhere, but could someone please help fix the issues I'm facing. Everything else seems to running fine, it's just when I try to run the program that certain things hit the fan.

    Read the article

  • Kubuntu 11.10 Lot of Networking problems

    - by Cobraone
    Since I upgrade to 11.10 I have a lot of problems with KDE. First of all there are problems in configuring a static IP address. Just to explain @home I have a normal fiber ADSL and I use a DHCP. When I go to a customer I must insert a static IP address. With ifconfig everything seems ok but there is something wrong in searching DNS names. (I have installed Ubuntu and was going ok again). Now I Have reinstalled again Kubuntu 11.10 and I have the same problem in addition today I have discovered that if I connect to a network in another customer office the desktop freezes and I could only switch between windows with alt+tab. No FN key or right click to open run command works. So i unplugged network (configuration is just DHCP here) and tried on another position in office. It was the same. My Laptop freezes when connected, a fedora 14 of a friend works. So I decided to connect my Galaxy S II as USB network device. Everything is ok for like 3 minutes. When I noticed a little loss of signal again the desktop freezes and i must work (like now) just switching between windows with alt+tab). Additional information: Unplugging network or restarting it via Konsole does not not solve the freezing problem. Every time I must open a console and reboot. Any idea of what tests to do ? Just a recommendation: If I must post here logs or something else please guide me. I use Linux since Ubuntu 9 but I am not an "expert".

    Read the article

  • Dual displays not working - NVidia - Ubuntu 12.04 - Second Monitor - Two Screens

    - by user75105
    Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.04 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

    Read the article

  • PARTNER News: Tips and Guidelines from Avago (formerly LSI)

    - by Zeynep Koch
    In this blog write-up we would like to focus our attention to one of our IHV partners, Avago (formerly LSI) . Avago and Oracle have been collaborating at many levels for many years.  At the lowest level, Avago and Oracle engineer solutions to inbox advanced features in our I/O device drivers.  We collaborate to test, verify and optimize these drivers in Oracle Linux with Unbreakable Enterprise Kernel. Both LSI Nytro and Sun F-Series PCIe flash devices are supported inbox in Oracle Linux with Unbreakable Enterprise Kernel. By collaborating early in the engineering design cycle we can find and resolve issues sooner and deliver to the end-customer a fully optimized platform for I/O efficiency and data protection.  Hear more about the partnership and benefits in this podcast  LSI and Oracle Partnership. Avago had also been working on technical whitepaper and video whiteboard to explain some of the optimizations you can achieve by using smart flash cache with Oracle Linux.  Technical Paper: Improve Database Performance Using Sun Flash Accelerator Card, Database Smart Flash Cache and Oracle Linux Video: Improving DB Performance with Database Smart Flash Cache If you want more information about the partnership and product benefits, you can visit the LSI Oracle alliance page. 

    Read the article

  • ADF - Now with Robots!

    - by Duncan Mills
    I mentioned this briefly in a tweet the other day, just before the full rush of OOW really kicked off, so I though it was worth re-visiting. Check out this video, and then read on: So why so interesting? Well - you probably guessed from the title, ADF is involved. Indeed this is as about as far from the traditional ADF data entry application as you can get. Instead of a database at the back-end there's basically a robot. That's right, this remarkable tape drive is controlled through an ADF using all your usual friends of ADF Faces, Controller and Binding (but no ADFBC for obvious reasons). ADF is used both on the touch screen you see on the front of the device in the video, and also for the remote management console which provides a visual representation of the slots and drives. The latter uses ADF's Active Data Framework to provide a real-time view of what's going on the rack. . What's even more interesting (for the techno-geeks) is the fact that all of this is running out of flash storage on a ridiculously small form factor with tiny processor - I probably shouldn't reveal the actual specs but take my word for it, don't complain about the capabilities of your laptop ever again! This is a project that I've been personally involved in and I'm pumped to see such a good result and,  I have to say, those hardware guys are great to work with (and have way better toys on their desks than we do). More info in the SL150 (should you feel the urge to own one) is here. 

    Read the article

  • Ubuntu 12.04 wireless disabled even though the direct connectin (thru modem) is working fine

    - by user90841
    Need help with my newly installed Ubuntu 12.04 system (dual booting along with Win 7), even thoguh I can use internet using the modem and directly plugging it, the wireless network is disabled and it says firmware missing. I tried the following options: 1) checking to see if the wireless is disabled using the hot keys (F2 or Ctrl+F2, Fn + F2 keys), the wireless is working fine in Win 7 but not in Ubuntu. 2) I am able directly plug the laptop with the modem and able connect to Internet using Ubuntu. 3) From the top right hand menu bar, te Wireless networks options say "device not ready (firmware missing) and the Enable Wireless checkbox is checked. 4) tried the command "rfkill list" , it shows all are NOT blocked. 0: phy0: Wireless LAN soft blocked:no Hard blocked: no 1: dell-wifi: Wireless LAN soft blocked:no Hard blocked: no 2: dell-bluetooth: BlueTooth soft blocked:no Hard blocked: no 3: hci0 Bluetooth soft blocked:no Hard blocked: no 5) ifconfig command shows eth0 and lo (lcoalhost) up and running but the wlan0 option is not available to show unless I type ifconfig -a, when it shows wlan0 but its down. 6) The command lspci -vvnn | grep 14e4 shows 04:00.0 network Controller [0280]: Broadcom Corp BCM4312 802.11b/g LP-PHY [14e4:4315] {rev 01) 08:00.0 Ethernet Controller [0200]: Broadcom Corp Netlink BCM5784M Gigabit Ethernet PCIe [1434:1698] {rev 10) 7) The file /var/lib/NetworkManager/NetworkManager.state shows all options are true (networking enabled, wireless enabled, wwlanenabled and wimaxenabled all options are set to true). 8) 'additional drivers' in your Dash and/or Preferences do not bring up anything at all. 9) output for lshw -C network shows *-network DISABLED description : Wireless interface physical id: 4 logical name: wlan0 serial: 78:e4_00"43:b6:ab capabilities: ethernet physical wireless Configuration: broadcast=yes driver=b43 driverversion=3.2.0.29-generic-pae firmware=N/A link=no multicast= yes wireless=IEEE 802.11bg

    Read the article

  • Reverse-Engineer Driver for Backlit Keyboard

    - by user87847
    Here's my situation: I recently purchased a Sager NP9170 (same as the Clevo P170EM) and it has a multi-colored, backlit keyboard. Under Windows 7, you can launch an app that allows you to change the color of the backlighting to any of a handful of colors (blue, green, red, etc). I want that same functionality under Linux. I haven't been able to find any software that does this, so I guess I'm going to have to write it myself. I'm a programmer by trade, but I've haven't done much low level programming, and I've certainly never written a device driver, so I was wondering if anyone could answer these two questions: 1) Is there any software already out there that does this sort of thing? I've looked fairly thoroughly but haven't found anything applicable. 2) Where would I start in trying to reverse engineer this sort of thing? Any useful articles, tutorials, books that might help? And just to clarify: The backlighting already works, that's not the problem. I just want to be able to change the color of the backlighting. This functionality is supported by the hardware. The laptop came with windows software that does this and I want the same functionality in Linux. I am willing to write this software myself, I just want to know the best way to go about it. Thanks!

    Read the article

  • 13.04 Temp Save, rt3290, Kernel downgrade

    - by user170534
    It's kind of a multiplying but I didn't wanted to open more than one topics. I'd have a fresh install of Ubuntu with tlp configured and using acpi_call to keep 7670M turned off. I was a short time arch user and with openbox and firefox it was about 60 to 70 degrees; wanted to turn to a stable release just for this reason. acpitz-virtual-0 Adapter: Virtual device temp1: +50.0°C radeon-pci-0100 Adapter: PCI adapter temp1: -128.0°C coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +56.0°C (high = +87.0°C, crit = +105.0°C) Core 0: +54.0°C (high = +87.0°C, crit = +105.0°C) Core 1: +55.0°C (high = +87.0°C, crit = +105.0°C) The temperature is not seriously high yet can be lower. Another issue is my wifi card, rt3290: The rt2800pci module is fine and all that but the download performance is pretty bad alongside of annoying signal range and the prop. driver gives a conf error about some specific rt2860 code and integrales in pci_dev file. If I blank off the error making variables, module loads but the driver is unused. Since the driver is old, I was thinking of downgrading the kernel of raring to 3.7 or may be 3.6. Should &-or can I?

    Read the article

  • Mobile web app, styling in percentages; I can't get height to work [migrated]

    - by Mick79
    I am building a mobile app for a band and obviously want it to display well in all the plethora of handsets out there today. I built it at first for my own device and it looks and works great, so now I am reworking it in percentages so that it works in all devices. I have a slider (jquerytools) going on and if i set width to 100% then it is perfectly wide in my iphone and my ipad... success, however I am not having any luck with height. It seems to only accept a height in px. If i set a height in percent it just doesn't display. any ideas? #header{ width:100%; height:198px; position:relative; z-index: 20; box-shadow: 0 0 10px white; } .scrollable { /* required settings */ position:relative; overflow:hidden; width: 100%; height:100%; box-shadow: 0 0 20px purple; z-index: 20; } .scrollable .items { /* this cannot be too large */ width:500%; height:100%; position:absolute; clear:both; box-shadow: 0 0 30px green; } .items div { float:left; width:20%; height:100%; } /* single scrollable item */ .scrollable img { float:left; width:100%; height:100%; /* height:198px; */ } /* active item */ .scrollable .active { border:2px solid #000; position:relative; cursor:default; } `

    Read the article

  • I have Ubuntu only and need to install Windows

    - by Terzuz
    I had Windows 8, I installed Ubuntu for a new OS, Then I want to sadly go back to Windows , I have a Windows Vista *.iso but I can't boot from it. When I try to extract the '.iso file and have the contents on my USB so it can boot up , When I restart and click F9 for my Boot Device Options , Only my Hard Drive and CD ROM are there but my "Generic Flash Drive" is not , But when I do not have Windows Vista '.iso on it , It will show up in the list. How can I make a partition of some sort, Provide instructions since I am new at this all , then I need to be able to use the Windows Vista installer and install Windows Vista, I would like Dual-Boot if possible. Info: I have the HP 2000 Laptop (Mine was removed from the Best Buy Website so the closest laptop to the specifications and the design is the link at the bottom) I am running Ubuntu 12.10. I have 4GB of RAM , 220 GB in my Hard Drive left , I have a USB Flash Drive which works sometimes , other times it fails. Note - I tried using GParted in Ubuntu but I had a problem where the main drive with 220 GB Free was locked , I am not sure what to do and can not find the correct forum. http://www.bestbuy.com/site/HP+-+Pavilion+15.6"+Laptop+-+4GB+Memory+-+320GB+Hard+Drive+-+Pewter/5043836.p?id=1218608951204&skuId=5043836

    Read the article

  • Oracle Virtual Desktop Infrastructure

    - by Fat Bloke
    A lot of the recent blog entries here have been about Oracle VM VirtualBox, possibly the coolest personal desktop virtualization product known to man. Deploying VirtualBox on your PC or Mac lets you run many virtual desktops at the same time to one user, you. But did you know that VirtualBox can also power an Enterprise-scale virtual desktop deployment too, delivering many desktops to many users?  As part of another Oracle product, Oracle Virtual Desktop Infrastructure (VDI), VirtualBox can run your Windows, Linux or Solaris desktops on servers located in the datacenter. Oracle VDI orchestrates the whole deal by looking after : creating or cloning the virtual desktops from a master template; managing the lifecycle of the desktops (create, start, suspend, resume, stop, delete); assigning which users get which desktops;  delivering easy and fast access to these virtual desktops from almost any device, such as existing PCs or Macs, iPads, or specially designed Sun Ray client devices too; load balancing and session management of all of this.  Architecturally the solution looks something like this: This is an increasingly hot area of the IT landscape, so the Fat Bloke has decided to create a new blog category (VDI) and dedicate a few blog entries to look into this in a bit more detail over the next few weeks. Watch this space... - FB 

    Read the article

  • Algorithms for Data Redundancy and Failover for distributed storage system?

    - by kennetham
    I'm building a distributed storage system that works with different storage sizes. For instance, my storage devices have sizes of 50GB, 70GB, 150GB, 250GB, 1000GB, 5 storage systems in one system. My application will store any files to the storage system. Question: How can I build a distributed storage with the idea of data redundancy and fail-over to store documents, videos, any type of files at the same time ensuring that should one of any storage devices fail, there would be another copy of these files on another storage device. However, the concern is, 50GB of storage can only store this maximum number of files as compared to 70GB, 150GB etc. With one storage in mind, bringing 5 storage systems like a cloud storage, is there any logical way to distribute or store the files through my application? How do I ensure data redundancy through different storage sizes? Is there any algorithm to collate multiple blob files into a single file archive? What is the best solution for one cloud storage with multiple different storage sizes? I open this topic with the objective of discussing the best way to implement this idea, assuming simplicity, what are the issues of this implementation, performance measurements and discussion of the limitations.

    Read the article

  • How to integrate Java ME SDK 3.2 with Eclipse

    - by SungmoonCho
    Here is also an instruction on how you can integrate Java ME SDK 3.2 with Eclipse. You need additional steps for Eclipse Juno, because it does automatically detect and download MTJ (Mobile Tools for Java) plugin. The following instruction is for Eclipse Indigo. 1. Download Java ME SDK and Eclipse plugins from here. 2. Install Java ME SDK 3. Launch Eclipse 4. Go to "Help" - "Install New Software" 5. Click "Archive", and choose the Eclipse Plugin zip file you downloaded. Name is something like "Java ME SDK Plugin" 6. Choose Java ME SDK Tools, and select "Next". 7. It will calculate requirements and dependencies. Simply follow the instruction. 8. You may also have to manually install the platform. Check out "Help" - "Preferences" - "Java ME" - "Device Management". If you do not see Java ME SDK 3.2 devices, click "Manual Install" on the right side, and specify the folder where Java ME SDK is installed. By default, it is installed at "C:\Java_ME_platform_SDK_3.2". 9. You're done. Now you can use the Java ME SDK plugins for Eclipse.

    Read the article

  • Which hard disk drive is which?

    - by djeikyb
    I want to know which hard disk drive corresponds to which device path. It's trivial to match the hard disk stats (brand, size) with the dev path, but I want more. I want to know which drive is which inside my case. What's a good way to go about getting this info? Rules: I am a lazy bum. I don't want to tear apart my server to remove all the drives, then add back one by one. A reboot is acceptable. The drives are inconveniently scrunched together in the case. All label information is hidden. The case can be opened. Most disks are SATA, so theoretically hot swappable. Unplugging cables is fair game. Bonus: For a cli only solution. I'll award answer to the best/easiest gui or cli answer, and give a bounty to the next-best answer of the other kind. Or maybe the other way around, because the bounty is worth more points.

    Read the article

  • Is it reasonable to null guard every single dereferenced pointer?

    - by evadeflow
    At a new job, I've been getting flagged in code reviews for code like this: PowerManager::PowerManager(IMsgSender* msgSender) : msgSender_(msgSender) { } void PowerManager::SignalShutdown() { msgSender_->sendMsg("shutdown()"); } I'm told that last method should read: void PowerManager::SignalShutdown() { if (msgSender_) { msgSender_->sendMsg("shutdown()"); } } i.e., I must put a NULL guard around the msgSender_ variable, even though it is a private data member. It's difficult for me to restrain myself from using expletives to describe how I feel about this piece of 'wisdom'. When I ask for an explanation, I get a litany of horror stories about how some junior programmer, some-year, got confused about how a class was supposed to work and accidentally deleted a member he shouldn't have (and set it to NULL afterwards, apparently), and things blew up in the field right after a product release, and we've "learned the hard way, trust us" that it's better to just NULL check everything. To me, this feels like cargo cult programming, plain and simple. A few well-meaning colleagues are earnestly trying to help me 'get it' and see how this will help me write more robust code, but... I can't help feeling like they're the ones who don't get it. Is it reasonable for a coding standard to require that every single pointer dereferenced in a function be checked for NULL first—even private data members? (Note: To give some context, we make a consumer electronics device, not an air traffic control system or some other 'failure-equals-people-die' product.) EDIT: In the above example, the msgSender_ collaborator isn't optional. If it's ever NULL, it indicates a bug. The only reason it is passed into the constructor is so PowerManager can be tested with a mock IMsgSender subclass.

    Read the article

  • Can't install Ubuntu 12.04 64-bit on a dual-drive MacBook Pro 8,2

    - by kizdp
    Good afternoon, this is the first time I participate here as I'm new to Linux. I've been trying to solve the following problem for over a week without any sign of success so I hope there's a much more knowledgeable person here that can give me a solution. I have an early 2011 MacBook Pro (8,2) with Mac OS X running in a SSD. Then, instead of the Optical bay, I have a HDD in where I would like to install Ubuntu to run it natively. I've tried to do the normal installation process, with or without rEFIt, but it seems the problem resides on the communication between the device containing the Ubuntu .iso file and the laptop. It doesn't allow communication with the boot CD or USB drive. It usually says: “Loading bootlogo...” after I click on the “boot from CD, Linux Icon”. After trying several things, I would like to know if I could install Ubuntu on the HDD as an external HDD (using a friend's Window's system) and then simply put it back into my laptop so as to become an Internal HDD again. I guess, I would have to reinstall many drivers and so on, but would this approach work? Thanks in advance and sorry for this huge block of text

    Read the article

  • How do I add a boot from cd option to yaboot?

    - by Sergiu
    So I'm dual-booting Ubuntu 12.04.1 on my iMac G5 powepc alongside Mac OS X and I want to add a boot cd option to yaboot because I'm trying to boot a scratched Mac OS X installation DVD that takes a while to read and the frst bootstrap moves on too fast. How do I edit the timeout for the first bootstrap anyways? So, my main question is, how do I add a cd booting option to yaboot and then, how doI boot it? The devalias from OpenFrmware tells me that 1 have 2 cd-rom instaled, on is /ht/pci@3/ata-6/disk@0 and the other on ends with a 1 instead of a zero. These are the contents of my yaboot.conf file: yaboot.conf generated by the Ubuntu installer run: "man yaboot.conf" for details. Do not make changes until you have!! see also: /usr/share/doc/yaboot/examples for example configurations. For a dual-boot menu, add one or more of: bsd=/dev/hdaX, macos=/dev/hdaY, macosx=/dev/hdaZ boot="/dev/disk/by-id/scsi-SATA_ST3160023AS_5MT1GCWA-part2" device=/ht@0,f2000000/pci@3/k2-sata-root@c/@0/@0 partition=4 root="UUID=798a048f-ee48-49e0-bba3-111aed8dee04" timeout=12000 install=/usr/lib/yaboot/yaboot magicboot=/usr/lib/yaboot/ofboot enablecdboot macosx="/dev/disk/by-id/scsi-SATA_ST3160023AS_5MT1GCWA-part3" image=/boot/vmlinux label=Linux read-only initrd=/boot/initrd.img append="quiet splash" What do I add here so that yaboot will boot from my cd in like 3 minutes after startup? Thanks!

    Read the article

  • Ubuntu 12.04 startup is slow and dmesg output seems to lose several seconds

    - by cdowen
    I use ubuntu on Dell Inspiron n4050.I have upgraded to ubuntu 12.04 from 10.04. But now I find the system startup is a little slow and plymouth only show purple screen without logo during startup. When I use dmesg, it shows such messages: [ 2.497750] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.603028] usb 2-1.6: new high-speed USB device number 3 using ehci_hcd [ 2.715538] Initializing USB Mass Storage driver... [ 2.715594] usbcore: registered new interface driver usb-storage [ 2.715596] USB Mass Storage support registered. [ 21.317843] Adding 2000892k swap on /dev/sda5. Priority:-1 extents:1 across:2000892k [ 21.323724] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.391450] udevd[431]: starting version 175 I wonder what it is doing between 2 second and 21 second. Is it related to being so slow? I tried bootchart. It gave me a complex picture. Sorry I can't post it here. http://3.bp.blogspot.com/-7LX8T5uQvlw/UKhdFMVkp4I/AAAAAAAAADg/dtxePkE94mg/s320/lengzhen-ubuntu-precise-20121118-1.png While ubuntu is booting , I also noticed that it appears:/tmp is not ready or present And sometimes follows *Stop saving kernel messages. Is this the reason dmesg lost output?

    Read the article

  • USB Keyboard works occasionally

    - by palimmo
    A few days ago I bought a SL640 Hama USB keyboard to use on my laptop with Ubuntu 12.04. But I'm having problems, as it works one time out of 10! While on my girlfriend's laptop, with Win Vista, always works. And on my laptop I have Win7 in dual boot. And I have to say that it always works on it. Here are some infos: ~$ lsusb Bus 006 Device 003: ID 04d9:1503 Holtek Semiconductor, Inc. Shortboard Lefty As you can see, the OS recognized it but the keyboard doesn't react ... even the Caps Lock and Num Lock keys don't blink. Regarding the legacy support (useful for GRUB), I have found no entry in the BIOS. But I'm not interested in it. I just want to use it in Ubuntu. However, in GRUB it works sometimes. Surprisingly, now I have booted my laptop: the usb keyboard hasn't worked in GRUB but it has worked since the ubuntu login! And now I'm typing with it. Well.. it means that Ubuntu has the right drivers and they work. But how to "load" them always correctly? thanks in advance!

    Read the article

  • My new hard drive won't automount on boot

    - by user518
    I installed a new hard drive right before installing the new Ubuntu 11.10 by reformatting, not upgrading. I was able to mount my drive, and partition it. It's a 1TB, and I was able to transfer all of my music, and videos to it. For some reason, it won't mount on boot, and I can't figure out how to manually mount it afterwards either. Here's my current /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=e0fbdf09-f9a0-4336-bac3-ba4dc6cfbcc0 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=adf15180-c84c-4309-bc9f-085fd7464f89 none swap sw 0 0 /dev/sdc1 /media/sdc1 ext4 defaults 0 0 The last line is what I added for my hard drive. Here's the output from sudo lshw -C disk: % sudo lshw -C disk ~ *-disk:0 description: ATA Disk product: ST3250310AS vendor: Seagate physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 3.AD serial: 6RYBF2QE size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000da204 *-cdrom description: DVD-RAM writer product: DVD+-RW DH-16A6S vendor: PLDS physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: YD11 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc

    Read the article

  • One of my VMs went boom using Virtual Box and how it got fixed

    - by Enrique Lima
    I am running an HP Envy 15, 16GB and 500GB (7200 RPM) Hard drive. Had a VM configured from another environment, created the virtual machine config file on Virtual Box, everything seemed ok. Fired it up, and it was  s   l   o   w, it took close to 10 minutes for it to load, and about 5 more to see Windows was in the process of loading before the BSOD.  Thought, maybe, just maybe it will not happen again … oh was I wrong. Frustration had already hit an all time high with this configuration and the number of issues I’ve had. How I did the troubleshooting … The best thing to do (IMO) is to step back, and gather your tools to debug this situation. Tools:  Virtual Box command line tools, Windows Debug. Virtual Box comes with a pretty good set of tools to examine, migrate and overall tasks to deal with VMs. The firs step:  use VBoxManage to prevent the VM from rebooting after the error to get enough time to really dig into the BSOD issue. Command used:   VBoxManage setextradata VMNAME "VBoxInternal/PDM/HaltOnReset" 1 Once this was done, the error reported was an “Inaccessible boot device” coming from a “Stop – 7B” type of error on the BSOD. The issue I had with this, my VM was configured to use a virtual SATA controller, and thought Windows 2008 R2 would handle this fine … again wrong!  Because the integration tools from the other product where wanting to take effect that was throwing everything off. The fix The fix was almost handed to me, edited the configuration for the VM, removed the SATA controller from it, added the virtual hard drive under an IDE controller, boot up and voilà … it works! I was then able to install the Virtual Box guest tools and such, but have decided to favor “keep on working” over “let’s try SATA again”

    Read the article

  • Kubuntu never gets to the login screen

    - by searchfgold6789
    I am not sure if Xorg is using the right device... The system in question is an A4-1400 CPU with built-in Radeon Graphics. I added a PCIe Radeon HD 5750, and changed the BIOS so it would use that card automatically. Now it appears that I can see output from the TV plugged into the HDMI port, and boot into recovery mode, but cannot get to a desktop - X doesn't start. It just freezes at the Kubuntu splash screen. I have no idea how to get X to use the proper graphics card. I pasted the Xorg.log to http://paste.ubuntu.com/6261137/. And the Xorg.conf generated by aticonfig --initial is at http://paste.ubuntu.com/6261161/ Also, see lspci and lshw -c display outputs. I can provide more information, but something does tell me X is not using the right graphics card and I've no idea where to begin how to fix it... I faced a similar issue before with another distribution but found no information anywhere on how to make X use a specific graphics card. Or maybe it's not that simple.

    Read the article

< Previous Page | 696 697 698 699 700 701 702 703 704 705 706 707  | Next Page >