Search Results

Search found 29317 results on 1173 pages for 'device control'.

Page 701/1173 | < Previous Page | 697 698 699 700 701 702 703 704 705 706 707 708  | Next Page >

• Can't install Ubuntu in Windows 8

  - by user171635

  I’ve been trying to install Ubuntu 13.04 64-bit edition on an ASUS (K53Z) laptop. I have Windows 8 64-bit installed in a non UEFI mode (I think since it starts-up with the Windows logo and I don’t have the UEFI settings). This laptop had installed Windows 7 and when I upgraded it I didn’t knew about the UEFI advantages. I tried several times to install Ubuntu from a USB device and it loads the logo and then I can’t go further in the installation. I thought it was the version of Ubuntu and tried to install Fedora (even if I personally prefer Ubuntu). I had the same problem: Fedora’s logo appears and it gets stuck. I tried also to boot from different USB devices and didn’t work either. My Bios has EFI options to boot but they were not enabled. So I tried to enable them to boot the USB in UEFI mode. A menu shows up with the options of install Ubuntu and try Ubuntu. If I click the Install or try option, I get a black screen and I can’t go further with the install (which I think is normal since I don’t have Windows 8 in EFI mode). My hypothesis is that the Bios isn’t letting Ubuntu write or read from my SSD, because the activity LED in the USB memory is on when it’s loading the installation files. Once the files are ready and the Ubuntu logo is loaded I don’t see a LED activity on neither the SSD or the USB. Thanks If I missed data you can ask me.

  Read the article

• Battery Life in ubuntu 14.04

  - by user287466

  Today i had fresh installation of ubuntu 14.04 previously i had ubuntu 12.04 and had 5 to 6 hours of battery backup even at constant work, but in 14.04 getting 3 hrs only, tried with tlp but no use. lspci: 0:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)

  Read the article

• Unreal Torunament (UT99) no sound in 12.04?

  - by Talas

  I've been trying to get sound working in Unreal Torunament for a couple of days now. I'm using the native Unreal Tournament version, not wine or something like that. I have sound in all other games and media applications that I have tried. In older ubuntu versions it worked fine. I'm now using kubuntu 12.04, I have all the alsa-oss and oss-compat packages installed. I have followed most of the advice out there, and it all seems to fall on padsp and aoss. My problem, however, is that even when trying to use padsp or aoss, I can't get any sound at all. (Note UT has two output modes: ALAudio and Generic(OSS), I have tried both). Is there some configuration required to use padsp or aoss correctly? I have ran it like padsp ./ut and aoss ./ut If using the AL backend in UT I get (both aoss and padsp give this): Bound to ALAudio.so open /dev/dsp: Invalid argument Audio initialization failed. If using the OSS backend in UT I get (both aoss and padsp give this): Bound to Audio.so Failed to open audio device. Audio initialization failed. Note that so far, I have gotten absolutely no sound. Thanks for any help!

  Read the article

• Partitions mixing up

  - by anon

  I am trying to install ubuntu alongside my windows 7. The problem is that ubuntu is not detecting all of my partitions and basically clubs together many of them. The same thing is done by using GParted. However this problem does not arise while I am using Windows - 7. I cant paste the image of GParted since I dont have the required reputation... I think this could be due to stray GPT data but am not sure how to take care of it. Can someone help me figure this out ? The output of fdisk -l is as follows Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x20000000 Device Boot Start End Blocks Id System /dev/sda1 63 2047 992+ 42 SFS /dev/sda2 * 2048 206847 102400 42 SFS /dev/sda3 206848 146802687 73297920 42 SFS /dev/sda4 146802688 625140399 239168856 42 SFS However actually I have 4 partitions along with 25 gb unallocated space that I had thought to use for Ubuntu installation.

  Read the article

• Win8 x64 Laptop (Samsung) unable to boot after installing Ubuntu

  - by user285872

  I posted here a while back and no one was able to help me so I am going to try to explain my problem better. I have a Samsung series 7 Ultrabook and I connected a USB optical drive with an Ubuntu 14.04 installation disc. I did not set or change any of my partitions, however, as I mainly wanted to just be able to boot from the disc and fool around with Ubuntu. Upon restarting my computer I get a blue-screen message saying: Recovery Your PC needs to be repiared The Boot configuration date file is missing some required information. File: \BCD Error Code: 0xc000000d You'll need to use the recovery tools on your installing media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. However I am never given the option to even try to boot to anything. When I turn my computer on the optical drive spins and then after a moment or two comes to a halt. I turned off safeboot and switched it to CSM (I believe that is what it is called) mode, and that makes it so when I turn my computer on it takes me to a Windows Recovery screen. I am able to change the date I want to recover and view all the applications installed, however upon recovering Windows says "All boot options are tried. Press key to recover with factory image using Recovery or any other keys for next boot loop iteration." It seems to be stuck in a loop. Can someone please help me?! I'm so confused and nothing is working!

  Read the article

• Ubuntu Wireless not working on Lenovo t400

  - by VmaxBoss

  This problem started after upgrading to 12.04, an my system is 'up2date' Have tried most of the solution-proposals found on the net. lspci -nnk | grep -iA2 net 00:19.0 Ethernet controller [0200]: Intel Corporation 82567LF Gigabit Network Connection [8086:10bf] (rev 03) Subsystem: Lenovo Device [17aa:20ee] Kernel driver in use: e1000e 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237] Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211] Kernel driver in use: iwlagn iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11abgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off sudo lshw -C network *-network description: Ethernet interface product: 82567LF Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 03 serial: 00:22:68:1a:c4:75 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.0.2-k2 duplex=full firmware=1.8-3 ip=192.168.2.154 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:29 memory:fc000000-fc01ffff memory:fc024000-fc024fff ioport:1820(size=32) *-network DISABLED description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:26:c6:6c:2d:24 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn latency=0 multicast=yes wireless=IEEE 802.11abgn resources: irq:30 memory:f4300000-f4301fff Please help Br/VB

  Read the article

• How to fix GRUB on dualboot with Windows7 and Ubuntu?

  - by b_oliv

  I am a relatively recent user of Linux. I had several releases of Ubuntu installed on my laptop working in dual-boot and never had any issues. Recently, I installed openSUSE because I thought it would be necessary for an assignment at my university. It turns out it wasn't so I returned to Ubuntu and decided to burn the new .iso to a CD and install it. The problem is that during installation process I almost for sure messed up with the partitions and now, whenever I tried to load Windows 7, it will tells me that a required device is inaccessible. So, I reinstalled Ubuntu again and now all I get is that I am redirected to the GRUB menu without any warnings. I tried creating a Windows Recovery Disk but it gives me Unexpected I/O error. I suspect it is because it was downloaded from the Internet and maybe some files weren't there. I tried everything without success, so I decided to ask here, in the hope I can receive some help and also learn how to help others with it in the future. Here it is my boot info summary: http://paste.ubuntu.com/1344990/ Also, I might add, that on the boot-repair advanced options, the box repair Windows boot files is "locked", so I can't check it. EDIT: Apparentely, the box is locked, because, from what I understood after reading the boot-repair information, everything is fine with my windows boot-files... I still need some guidance though

  Read the article

• external usb hard drive is not being seen anymore

  - by incrediblehulk

  I think my problem is a little different than several other similar titled questions. Everything started while I was using 10.10. External drive was always recognized and mounted, but the timing of this differed. I mean when I booted, the OS sometimes saw the drive immediately, sometimes after a few minutes, sometimes after hours. Although this was annoying, I tolerated this somehow. Then this problem persisted after I upgraded to 11.04 with a clean install. Afterwards, the drive became totally invisible to the OS. It is not even detected as an usb device anymore. However, there is one thing I can do to make it seen. If I boot to another operating system which can detect the drive, and then boot back to ubuntu, everything is perfect. but this is of course very impractical. To summarize, the usb drive is recognized by ubuntu if and only if another OS in the same computer could recognize it first. I should also say I have not had any problems with the same drive in any other OS or a different computer. My drive is philips with a hitachi hdd inside, has its own power source and any other usb powered drives have never caused this kind of a problem. I've tried almost all recommendations in similar topics but none of them seems to be related to this one. What can I possibly do to fix this?

  Read the article

• Dual displays not working - NVidia - Ubuntu 12.4

  - by user75105

  Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.4 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

  Read the article

• Software Error Basics

  Software Error Basics Who Causes Errors?   Software errors are caused by: ·    End-users ·    Programmers ·    Computer Systems   What Causes Errors?   Software errors are caused by: ·    Programmer Mistakes and Assumptions ·    Invalid data ·    Unexpected User Interactions ·    Missing Resources o  Files o  Databases o  Network Connectivity ·    Poor network connection ·    Insufficient Permissions   Where Do Errors Occur?   Software errors can occur anywhere code is executed:   ·    Desktop PC ·    Laptop PC ·    Server ·    Tablet PC ·    Mobile Phone ·    Any Device that can execute software   When Do Errors Occur?   Software errors occur when source code is being compiled (Compile-Time) or executed (Run-Time).  

  Read the article

• Reason why Windows can't be installed on Ubuntu , Any Help though?

  - by Terzuz

  Well I got my Windows Vista .iso file , I put it on my USB Drive , Extracted , Then I restarted and went to "Boot Device Options" Clicked "Generic USB" (What I labeled when I formatted) Then it stood on a black screen for 15 minutes , Then just went to Ubuntu , Now I found out exactly what happened Why Windows WONT work on Ubuntu is a simple reason Not if you save it in NFTS Format or MSDOS (Both Windows Formats) , Not if you use anything special , This even applies to the Ubuntu downloader , One specific reason that I just noticed , Since WINE (Windows Application Loader) can't run while you click the USB , You can't open the Setup.exe file needed to install the Operating System , That means you can not install it at all if it is a .exe installer file , Then what can we do? Only other way is to make a partition with GParted , Put a partition , then install WINE , Then run your Windows Setup.exe file , Then Wine will load it up! Why not to open Setup.exe before you make a partition - Simple , It WONT WORK! I have tried , It says you need __ Amount of space and can be put on any partition , Yeah , Any partition NOT BEING USED Here is where I need your help! - I want to make a partition but they all show as locked when I open GParted , So How am I supposed to open them up? Get a hammer and tell HP my laptop didn't want to open its partitions? Nope , I need some help on how to unlock the partitions or what to do , Thank you in advance PS- If I could , I would put a bounty to this but I do not have enough reputation!

  Read the article

• How do I force the system to look for new sound devices?

  - by John Zeringue

  I have a small flat screen TV (Toshiba) that I often connect via HDMI to my laptop (an HP Pavilion dv4) and use as a computer monitor. When I do this, I prefer to use the TV's speakers, particularly when I'm watching video, because the sound quality is much better. However, when I connect the HDMI cable after turning on my computer (rather than having it plugged in before booting up), Sound Settings does not list the TV as an output device, and I am forced to reboot. I was curious if there is an easier solution to this, perhaps a CLI command to check for new sound outputs. Does anyone know of something like this or have another solution? To clarify, I believe this is a software problem. The HDMI always works, and I can switch my desktop over to the TV at any time. The issue is that, if the HDMI wasn't connected during start up, the TV will not appear as an output option in the Sound Settings GUI. So, unless I'm mistaken, my question is not HDMI specific, but rather a general usage question about manipulating sound settings from the command line.

  Read the article

• lshw not showing network

  - by triunenature

  Output: {User}@{Computer}:~$ sudo lshw -class network {User}@{Computer}:~$ Another Test: {User}@{Computer}:~$ lspci 00:00.0 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3) 00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3) 00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2) <<---- Network Card???? 00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 (rev 70) 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GT] (rev a1) If you look at 00:07.0 I believe that is the network card. However lshw doesnt show it. I mainly need information on network speed 10MBpS/100MBsP/1000MBpS Though knowing why my system isn't working would be nice.

  Read the article

• Ubuntu 13.04 Sound Problem after following weird commands

  - by user206356

  After launching a few commands : echo autospawn = no >> ~/.config/pulse/client.conf #use ~/.pulse/client.conf on Ubuntu <= 12.10 killall pulseaudio $LANG=C pulseaudio -vvvv --log-time=1 > ~/pulseverbose.log 2>&1 My sound does not work. (just with the speakers, with headphones it works but I can not change the volume) The sound icon on the top right corner does show a speaker with a single non continuous line. I can not change the volume; it is frozen. There can be an extremely low output of the sound (I hear something but I am not sure...) It does not show a single output device that is avalaible, not even the "dummie". I have tried to reset pulseaudio, alsa, remove it, purging it, reinstalling it, without having success. EDIT: I have tried launching pulseaudio via the terminal. It worked :D However, I am very surprised why it does not automatically start at the start of the computer. Any ideas ? Here the console output : W: [pulseaudio] authkey.c: Failed to open cookie file '/home/simonm/.config/pulse/cookie': No such file or directory W: [pulseaudio] authkey.c: Failed to load authorization key '/home/simonm/.config/pulse/cookie': No such file or directory W: [pulseaudio] authkey.c: Failed to open cookie file '/home/simonm/.pulse-cookie': No such file or directory W: [pulseaudio] authkey.c: Failed to load authorization key '/home/simonm/.pulse-cookie': No such file or directory

  Read the article

• Scaling sprite velocity / co-ordinatesin Android

  - by user22241

  I'm trying to find the answer to a question that I've had for a long time, but am having trouble finding it! I hope someone can help :-) I'm trying to find information on how to scale sprite velocity / movement / co-ordinates. What I mean by this is how do I get a sprite to move at the same speed relative to the screen size / DPI so that it takes the same amount of real-time to get from one side of the screen to the other? All of the posts pertaining to sprite scaling that I can find on the various forums relate to the size of the sprite, but this part of it I'm OK with so far, it's just that when I move a sprite, it kind of gets there at different speed depending on the dpi / resolution of the device. I hope I'm making sense. This is the code I have so far, instead of using explicit amounts, like 1, I'm using something like the following: platSpeedFloat= (1 * (dpi/160)); //Use '1' so on an MDPI screen, the sprite will move by 1 physical pixel Then basically what I'm doing is something like this: (all varialble previously declared) platSpeedSave+=platSpeedFloat; //Add the platSpeedFloat value to the current platSpeedSave value platSpeed=(int) platSpeedSave; //Cast to int so it can be checked in the following statement if (platSpeed==platSpeedSave) //Check the casted int value to float value stored previoiusly {floorY=floorY-platSpeed; //If they match then change the Y value platSpeedSave=0;} //Reset Would be grateful if someone could assists - hope I'm making sense. The above doesn't seems to work the sprite moves 'faster' on lower DPI screens. Thanks

  Read the article

• cannot log in to all account except guest after mounting new partition

  - by student

  I really really need help. to do my homework from school, since two days ago, I was installing oracle 11g on my ubuntu. through that process, there was lots of problems also, but searching a lot, in somehow I could go to the next phase installing it. (because it was the first time to install on ubuntu by myself..) but when I was making password for oracle and clicked next, it says there are not enough space for home/oracle folder, So to make another space, I mounted another space after checking Gparted and using Software device management, I mounted it. And when I rebooted it, since then, I cannot log in to my own administrator account and even to oracle account(that I made for oracle 11g on ubuntu ) when I type the passwords for it, it seems to work but it redisplay the first page to log in, without really logging in it.. So I loggined to here as guest account... and even I cannot try gnome console manipulation to restore or fix it.. because it is guest account... I`m struggling for three days and... help me, how do I need to do? and at the time oracle said it needs enough space for its home folder, how I should have done?

  Read the article

• How to synchronize a whole Ubuntu?

  - by Avio

  I think that the time is ripe to have my whole Ubuntu synchronized just as my Dropbox folder is. Given that we are always talking about files and directories, what's the difference between my Documents folder and my /usr system directory? Almost none, except for their location. In fact, I think that there is just one big issue that prevents people to have their beloved installations mirrored wherever they go: symlinks. Dropbox, Google Drive, Ubuntu One, Sugarsync, Skydrive, none of these services support symlinking. This means that if I push a symlink in one of the synced folders, locally the symlink is kept as is, but remotely (in the cloud or on the other synced machines) the symlink is resolved to the actual file that was originally pointed to. This completely disrupts Linux installations, thus these services can't be used for this purpose. So the question is. Does anybody knows a way to achieve this? A whole Ubuntu, always synchronized with a remote running copy, but still locally stored on both disks? My best guess is that I could use NFS. But the main difference between Dropbox and NFS is that NFS is a remote filesystem that always forces to remotely access the files, while Dropbox pushes modifcations to local filesystems (and thus would perform better). I've also heard about NFS caching. Does anybody knows if this solution could approximate Dropbox in this sense? P.s. I know that /boot, /dev, /proc, /run, /tmp and device-specific mountpoints in /mnt and /media will have to be left out the sync mechanism. What I'm interested in is the principle. Can this be done with reasonable performance, having reasonable resources (e.g. ~ 1Mbps upload bandwidth and a public IP address)?

  Read the article

• How do I get 12.04 to recognize swap partition so that I can hibernate?

  - by Kayla

  I justed installed 12.04 and used gparted to erase and enlarge my swap partition. When I rebooted, gparted said that the file partition for the swap was unknown. Gparted doesn't let me change the file partition to "linux-swap". It does let me change it to NTFS, but when I reboot, it goes back to "unknown". Thanks in advance for your help. Output from sudo swapon -s: Filename Type Size Used Priority /dev/mapper/cryptswap1 partition 9025532 0 -1 Output from sudo fdisk -l: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9d63ac84 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2459647 1228800 7 HPFS/NTFS/exFAT /dev/sda2 2459648 197836472 97688412+ 7 HPFS/NTFS/exFAT /dev/sda3 466890752 488395119 10752184 7 HPFS/NTFS/exFAT /dev/sda4 197836798 466890751 134526977 5 Extended /dev/sda5 197836800 448837631 125500416 83 Linux /dev/sda6 448839680 466890751 9025536 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/mapper/cryptswap1: 9242 MB, 9242148864 bytes 255 heads, 63 sectors/track, 1123 cylinders, total 18051072 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x951b7f53 Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table

  Read the article

• VPNs - The ins and outs of IPSec & VPNs in general [on hold]

  - by Magus

  I have to decided to mess around with VPNs on my home router, to access a couple of servers in the back room of my house, however, I went into this thinking happy thoughts and easy-peasy-lemon-squeezy... Now I feel like doing drugs, as if maybe that will help me understand the myriad of terms which come with this nifty little tool. Basically, I do understand WHAT a VPN is, but I have no idea how to set one up. I have a Cisco router ( will supply more info if needed ), and would prefer to use IPSec for this ordeal. I'd like to have the following terms explained ( and yes, I have used the famous Google to help, close but no cigar ) : "Local Secure Group", "Remote Secure Group", "Remote Secure Gateway", how different types of "Keys" work ( again, I know the basics ), and for the "Add VPN Config" screen on the connecting device: "Server, does it have to be an address, or just an IP?", "Account; is this the tunnel name?", I am going to assume 'Password' means the Key, "Group Name; or is THIS the tunnel name?", and "Secret; I halfish know what this is..." I would really appreciate any contribution made, no matter how small, even if it includes a redirect. I just want to learn. Thanks in advance! Magus

  Read the article

• Trouble installing from disk

  - by SuperNatural

  I'm writing this in desperation, Windows is slowly killing me and i need to change my home pc os to Ubuntu 11.04 as soon as possible. I created a USB flash drive to install ubuntu, twice, and both times they failed to begin install on restart of my pc. i read on another forum that you might have to change some boot sequence in BIOS but when pressing F2 to enter it didnt work. After a lot of cursing, I made myself an UBUNTU install cd and booted. To my excitement, it now displayed... try ubuntu and install ubuntu. i clicked install ubuntu which lead me to the preparing to install ubuntu display, i checked download updates while installing and clicked forward. The very next display is ' allocate drive space ' i assume there are meant to be options of drives provided but mine is just a blank box and underneath all the options to create a new partition table, add, change, delete and revert are all greyed out. There is a drop down menu labelled 'device for boot loader installlation' but the only option is /dev/sda. when i click install, a no root file system error comes up telling me to please correct from the partitioning menu. I am extremely frustrated. please!! can anyone help me...

  Read the article

• Boot failure on Ubuntu 11.04

  - by B Seven

  I was using my laptop with Ubuntu without problem for a few months. I did not update any software or install any OS updates. This morning when it started, I got error: no such device:.... error: no such disk error: you need to load the kernel first. Press any key to continue... Then takes me back to GRUB menu. Both Ubuntu option and recovery mode option show the same thing (above). What does this mean? How do I fix it? Since I did not install anything new, does it mean the SSD is dying (again)? How to check the SSD to and fix any file system errors? Ubuntu 11.04 EDIT: Just remembered something: when the system was shutting down, it did not turn off. There were a bunch of weird output statements, and I assumed the system had shut down so I turned it off with the power button. Perhaps something got corrupted because of that.

  Read the article

• How do I solve "System is running in low graphics issue" in Ubuntu INSTALLER ?

  - by hellodear

  I made a bootable USB for installing Ubuntu 12.04 LTS alongside Windows 8.1. I inserted my USB device and then booted into it. Then it showed me 2 options - 'Try Ubuntu' or 'Install Ubuntu'. Now I press 'Try Ubuntu' and then it says, "The system is running in low graphics mode". Then I press 'OK'. Then it showed me 4 options. Then again I click 'OK'. Then it shows a black screen and nothing happens. I have tried all possible answers provided in AU. What should I do? Please help. PS :- I am using Windows 8.1 with dedicated graphic card which is AMD Radeon HD 8670M. I am trying to do this in a Dell Laptop 3537 Inspiron. UPDATE :- I tried running the liveUSB session with nomodeset on and i was able to enter the installer. But when I run boot-repair(so that my Ubuntu gets detected in the GRUB menu) after installing Ubuntu successfully alongside Windows 8(following this tutorial with nomodeset on, I get the following error:- your system is running in legacy mode boot repair done

  Read the article

• Three Ubuntu 12.04 + Xfce problems

  - by user1708495

  sorry to bother you, but I wanted to set up a minimal Ubuntu 12.04 with minimal Xfce and probably due to my unawareness of several important things, not everything is working properly. -Sometimes when I shutdown I get error message from iwlwifi: It starts with a time out error about sending a power table and after several other errors it says "On demand firmware reload and "Unable to initialize device". And the shutdown stops there so I can only use hard shutdown. -Also when I boot, I often boot to a black screen, but pressing ctrl+alt+f1 gets me to the login prompt (I do not use a login manager). But then I sometimes cannot type. Seems probably more like a X server problem. When it works I only see the Plymouth splash for a very short time or sometimes not at all. -And the last problem is the most annoying one: Frequently Xfce freezes completely. I think ctrl+alt+f1 works sometimes, but other times I also have to use hard shutdown. When it freezes the cpu fan gets louder. I've been using Xbuntu for a while before, but with "real" Linux I am more a beginner, so I hope you forgive my questions Thanks

  Read the article

• Live HTML Preview

  - by netbeanstips

  When you need to edit an HTML document in NetBeans you may find useful this little plugin that adds a Preview tab to HTML editor window. The plugin works with some small issues in NetBeans 7.4 but I recommend using development builds instead. So install the plugin, restart NetBeans and open any HTML document. Notice there's a Preview button in editor's toolbar (see the red rectangle in the picture below). Now split the editor window by dragging the split button at top right corner. You can also use menu View - Split - Vertically.  Then in the bottom split part toggle Preview button. You will get a live preview of your HTML source code. The preview pane will auto-refresh as you edit the HTML code. There are even some handy tools in Preview toolbar, for example you can resize the preview browser to match the screen dimensions of various device types. I know there is full-blown HTML5 support in NetBeans 7.4. But if you need to edit a single document or when you're running Java-only NetBeans distribution this plugin may come handy... Note: The plugin is built on top of embedded WebKit browser which is based on JavaFX WebView component. So there might be some issue when using the plugin on some flavors of Linux.

  Read the article

• No wubildr, No spaceleft, Boot Error and A previous installation was detected in D:\ubuntu. Please uninstall that before continuing

  - by tdc2bdc

  At first I was downloading Ubuntu 12.10 using Windows Installer, but I cancelled it after just 2-3 minutes and dowloaded 32-Bit ISO (ubuntu-12.10-desktop-i386). Then I created bootable USB Stick (new HP 210 v210 w) using Pendrivelinux (Universal-USB-Installer-1.9.1.4). I Formatted D Drive. (Both by Windows & EaseUS) I've set boot priority correctly. But after getting message "Boot Error", I ran wubi.exe directly from USB drive. Now the message is "A previous installation was detected in D:\ubuntu. Please uninstall that before continuing." I formatted D: again and performed disk check, surface test using EaseUS. It shows no error or bad sectors. Formatted & checked my pendrive too. Directly ran .iso. But same error keeps coming. I found way around above problems, by copying extracted .iso on D:\ and installing Ubuntu using wubi.exe and though on boot it was shown with Windows 7, selecting it caused following error Try hd(0,0): NTFS5 : No wubildr Try hd(0,1): NTFS5 : So, I uninstalled it and Reeinstalled it Now installation fails at around 7mins saying " An error occurred. No space left on device. For more info please see log file " My D: is a 9 GB partition. (99% Free) Ubuntu Site 12.10 says it needs around 4.5 GB. Now Trying it by extendin D: to 10 GB... Got No wubildr. Please help. tdc2bdc

  Read the article

< Previous Page | 697 698 699 700 701 702 703 704 705 706 707 708  | Next Page >