Search Results

Search found 23472 results on 939 pages for 'show'.

Page 704/939 | < Previous Page | 700 701 702 703 704 705 706 707 708 709 710 711  | Next Page >

• How to disable monitor auto detection in Windows 7?

  - by Jay Yother

  I am currently running Windows 7 Ultimate 64-bit with a dual monitor setup with an NVIDIA 7950 GT graphics card. One monitor is dedicated to this machine and the other monitor is connected to a DVI KVM switch. When I switch to my other computer, Windows 7 disables the monitor. However, when I switch back it does not re-enable the monitor. The only circumstance that automatically re-enables the second monitor is when I switch back after Windows has put the monitors into power save mode. I am continually having to bring up the NVIDIA control panel to have it re-enable the monitor. Under Windows XP I would just disable the NVIDIA service to prevent it from auto-detecting the monitor (which doesn't solve the problem under Win7), and in Vista there was a registry hack that would prevent this. It looks as though that has been removed in Windows 7. I have found similar questions posted on this site, but nothing that matches my problem exactly. The following link is the question that comes the closest, but does not provide a solution to the problem. http://superuser.com/questions/96683/how-to-fix-monitor-detection-on-windows-7 Is there a way in Windows 7 to disable monitor auto-detection? Update: I just added a second graphics card to my Windows 7 64-bit machine. I plugged one monitor into each graphics card. Now, when I use the KVM switch to switch back and forth it will re-enable the second monitor like it should. There are however, a few quirks with this. If I have a program maximized on the second monitor and it has focus, when I switch it will move to monitor 1. If I have a program maximized on the second monitor and it does not have focus, when I switch it will behave like it is minimized and when I bring it back up it will show up maximized on monitor 1. Definitely better than it was, but still looking for a way to disable the auto-detection.

  Read the article

• Why do I get swap space related errors when I still have lots of free memory in Solaris 10?

  - by Tom Duckering

  I am seeing a few of my services suffering/crashing with errors along the lines of "Error allocating memory" or "Can't create new process" etc. I'm slightly confused by this since logs show that at the time the system has lots of free memory (around 26GB in one case) of memory available and is not particularly stressed in any other way. After noting a JVM crash with similar error with the added query of "Out of swap space?" it made me dig a little deeper. It turns out that someone has configured our zone with a 2GB swap file. Our zone doesn't have capped memory and currently has access to as much of the 128GB of the RAM as it need. Our SAs are planning to cap this at 32GB when they get the chance. My current thinking is that whilst there is memory aplenty for the OS to allocate, the swap space seems grossly undersized (based on other answers here). It seems as though Solaris is wanting to make sure there's enough swap space in case things have to swap out (i.e. it's reserving the swap space). Is this thinking right or is there some other reason that I get memory allocation errors with this large amount of memory free and seemingly undersized swap space?

  Read the article

• PHP unable to allocate memory.

  - by AlReece45

  On my way to the office this morning, every website on our shared VPS started giving the same error (several times, not the typical memory_limit error which is fatal): Warning: Unknown: Unable to allocate memory for pool. in Unknown on line 0 The shared server is a 64-bit OpenVZ container running cPanel. There are only ~6 VPSes on the host-- this is the largest one at only 4GB. The host itself has 24GB RAM. As the below graphs show, the memory usage on the host and VPS are both rather low. CPU Usage/Disk/Host all seem to be normal. RlimitMem was set to 583653034, yet the memory usage is about the same as it usually is. Apache 2.2, PHP 5.2 (mod_php) Restarting Apache has corrected the problem for now. However, I'd like to prevent it from happening again and I'm not sure what was limiting the memory. RlimitMem was set to 583653034, yet the memory usage is about the same as it usually is. There's seems to be plenty of memory: what caused this error? VPS Memory Usage Host Memory Usage APC Information apc.ttl=0 apc.shm_size=0 apc.mmap_file_mask=(blank) 1 Segment(s) with 32.0 MBytes (mmap memory, pthread mutex locking)

  Read the article

• Hybrid Exchange Online setup with on premise public folders, certificate issues?

  - by exxoid

  We have a Hybrid Exchange setup with Exchange Online (v15 tenant) and Exchange 2010 on premise. The hybrid configuration for the most part is working, what I am having an issue with is getting public folders to work for cloud users. I followed the official documentation here (http://technet.microsoft.com/en-us/library/dn249373(v=exchg.150).aspx) and it kind of works. When I am accessing Outlook on a public wifi I am able to bring up the cloud mailboxes and on premise public folders show up in Outlook. When I am accessing email via Outlook as a cloud user on the same LAN as the on premise exchange, the cloud user makes the outlook.com connection for live/ad/archive mailbox but fails to create a proxy connection for the on premise public folders. The error I get is a certificate mismatch, it seems that when a user on the LAN accesses Outlook/Exchange it is using a different certificate vs. when Outlook is launched on a WiFi network. When I look at the Outlook connection information, I see the connection to outlook.com for ad/live/archive mailbox but no entry for public folder connection. Our on premise Exchange is 2010 SP3 with latest CUs. The client is a domain joined laptop with Windows 7 and Office 2010 SP2, latest windows updates applied. Our infrastructure has a working ADFS 3 and DirSync setup for Office 365. My question then is, what do I need to do to make sure that the Cloud user launching Outlook on the LAN uses the proper certificate (the wildcard 3rd party cert.. vs. the self signed certificate which it looks like it may be using during the connection attempt).

  Read the article

• is there a man in the middle attacking to my server machine?

  - by GongT

  My server works well about half a year. But a strange thing happened (several hours before). This server has two IP-address 58.17.85.19 & 117.21.178.19 When I navigate to http://58.17.85.19, nothing different as before. But http://117.21.178.19 will return a "302 Object moved" and become a "redirect loop" I do some test: ($cmd = "wget http://117.21.178.19/?xx=$RANDOM --max-redirect 0 -S --no-cache -O -") Step by step: run $cmd on my PC and my firend's one (we live in two side of China, far away). - got 302 run $cmd on this server - got 200 OK (content is correct result of index.php) run $cmd on another server in same computer room - got 200 OK telnet from my PC and build an HTTP request (type by hand) - got 200 OK shutdown php-fpm, run $cmd on my PC - got 302 run $cmd on server - 502 Bad Gateway shutdown nginx, run $cmd on both the server and my PC - Connection refused. create iptables rule, refuse any connection to 58.17.85.19:80. run nc -l 80 -k -vvv on server and run $cmd on my PC NC show me that.... Server accept connection (Connection from [my ip]) My connection closed ! (Remove fd xx from list) wget dump out response - got 302 I know that, normaly, NC will accept connection, then dump HTTP request from client, and client will wait for response. this connection will open forever(infact client will close connection becouse timeout), becouse NC can't give any response. So... where my request gone? who send an response to the client? some virus on my server system? If so, why 58.17.85.19 didn't has this error? or... I was attacked by a middleman?

  Read the article

• Can next hop address be same as destination address?

  - by Raj

  Like if host address is 100.0.0.1 and next hop address is 100.0.0.2 and destination ip address is also 100.0.0.2 Is this a valid use case? Any real life usage? <dest ip> <next hop> ip route 100.0.0.2 255.255.255.255 100.0.0.2 weight 1 next-hop-vrf GlobalRouter Above is the command on a router inside a VRF. 100.0.0.2 is pingable from host. 100.0.0.1 & 100.0.0.2 are an ip address assigned to a VLAN on host & destination respectively. On a linux box, Such configuration is valid. [root]# netstat -r -n Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 55.55.55.55 55.55.55.55 255.255.255.255 UGH 0 0 0 eth0 [root]# ip route show 55.55.55.55 via 55.55.55.55 dev eth0 As per my understanding, If a destination IP is reachable (i.e in the same subnet of host IP) we dont need a next hop. I came across one application for using next hop for destination IP in same subnet (i.e for VPN) See this: Will packets send to the same subnet go through routers? If next hop != destination IP but they are in same subnet as that of host, is a valid scenario for VPN, then i am wondering what are the applications of next_hop==dest_ip & subnet same as host? This is my first post in Super User. Extremely happy with the quick and warm response.

  Read the article

• How to add a writable folder to the PHP document root on linux

  - by Ron Whites

  We are building an example bash script for our PHP TestCoverage Tool use on Linux. The development environment is Ubuntu 12.04_1 but we intend to have the linux example work across as many linux versions as possible without modification. The example linux script requires a variable be set to the PHP Document Root path and by default uses a small PHP example source to show the user how our GUI and text report shows the covered and uncovered PHP code areas. The linux script is also intended to be easily alterable by the user to automate the TestCoverage display of users PHP code. The problem we are having with Ubuntu 12.04 (any linux?) is that the PHP Apache2 document root is defined in /etc/apache2/sites-available/default as /var/www and /var/www is defaulted with "drwxr-xr-x" read only access. So in order to add our own folder as /var/www/SDTestCoverage we must change /var/www to "drwxrwxrwx" read-write access. So it seems our script (at least on Ubuntu) will need to ... 1. acquire and save the /var/www permissions then do .. 2. sudo chmod 777 /var/www (to make writable) 3. mkdir -p /var/www/SDTestCoverage (create our folder under the document root) 4. sudo chmod 777 /var/www/SDTestCoverage (make our subfolder writable) 5. and finally restore /var/www permissions Thanks and our Questions are .. 1. Is this the standard way (using Ubuntu) one adds a writable folder under the PHP Document Root? 2. Is this the most general purpose way one adds a writable folder under the PHP Document Root on other versions of Linux?

  Read the article

• MySQL Tables Missing/Corrupt After Recreation

  - by Synetech inc.

  Hi, Yesterday I dumped my MySQL databases to an SQL file and renamed the ibdata1 file. I then recreated it and imported the SQL file and moved the new ibdata1 file to my MySQL data directory, deleting the old one. I’ve done it before without issue, however this time something is not right. When I examine the (personal, not MySQL config) databases, they are all there, but they are empty… sort of. The data directory still has the .ibd files with the correct content in them and I can view the table list in the databases, but not the tables themselves. (I have file-per-table enabled, and am using InnoDB as default for everything.) For example with the urls database and its urls table, I can successfully open mysql.exe or phpMyAdmin and use urls;. I can even show tables; to see the expected table, but then when I try to describe urls; or select * from urls;, it complains that the table does not exist (even though it just listed it). (The MySQL Administrator lists the databases, but does not even list the tables, it indicates that the dbs are completely empty.) The problem now is that I have already deleted the SQL file (and cannot recover it even after scouring my hard-drive). So I am trying to figure out a way to repair these databases/tables. I can’t use the table repair function since it complains that the table does not exist, and I can’t dump them because again, it complains that the tables don’t exist. Like I’ve said, the data itself is still present in the .ibd files and the table names are present. I just need a way to get MySQL to recognize that the tables exist in the databases (I can find the column names of the tables in question in the ibdata1 file using a hex-editor). Any idea how I can repair this type of corruption? I don’t mind rolling up my sleeves, digging in, and taking a bunch of steps to fix it. Thanks a lot.

  Read the article

• Can Windows Media Player create playlists based on folder structure?

  - by Chaulky

  Over the years I've carefully molded my digital media collection into a series of folders that make it easy for me to find what I'm looking for. I recently discovered the awesomeness that is streaming video from Windows 7 Media Player to the PS3 so I can watch it on the big screen without all the hassle of hooking the computer up to the TV. The problem is, I totally lose my carefully crafted folder structure and all my videos become one giant mess again... not cool! As a temporary solution, I've created a few playlists for my favorites (Dexter Season 4, Dexter Season 5, Breaking Bad Season 1, etc.). This is a HUGE pain in the a$$. So, is there a way to get Windows Media Player (on Windows 7) to maintain some sort of folder structure based on the location of the actual video files? So if I have my videos sorted into folders by show and season, Media Player will pick that up and let me browse it in the same way. As an alternative answer, I'll accept suggestions for a program that can also stream to PS3 and has this "folder organization" feature.

  Read the article

• What can be a reason for phpMyAdmin login to be not working (not at all, no reaction on submit)?

  - by Ivan

  When I open "http://localhost/phpmyadmin/", enter "root" as the user name and my MySQL root password and press go, then if I was using Firefox, I was getting offered to download index.php file (of a zero length), if I was using Opera 11, it said "Connection closed by remote server". Following recommendations I've removed all packages related to phpMyAdmin, PHP, MySQL and Apache and then reinstalled them step-by step (instead of just issuing apt-get install phpmyadmin and relying on the system to install the whole LAMP stack via dependencies as I've done before). The only change I've got was Firefox to stop offering to download index.php - now when I press Ok to submit my password, it just doesn't show any visible reaction at all. What may the reason be and how to fix it? I use up-to-date Xubuntu 11.04. Reinstalling the whole LAMP stack and phpMyAdmin did not help, neither did removing AppArmor. I've tried to use SQLBuddy instead, but there's exactly the same problem. So, I think, the problem is not in phpMyAdmin but in MySQL, Apache or something. MySQL seems to work if I use command line to access it. Apache & PHP seems to work also, as the login page of phpMyAdmin displays correctly.

  Read the article

• connections in FIN_WAIT and CLOSE_WAIT state

  - by Raj

  I would like to elaborate the setup so You guys can understand the question and answer more accurately. I have HAProxy as load-balancer, 4 webservers (apache 2.2.3) and one database server (MySQL 5). I am monitoring these servers by nagios. I have disabled the keepalive on apache as we have only 8GB of memory. Now what happens whenever I receive alerts for high memory and cpu utilization, I have observed that the connections from apache to database server hang in established mode (keepalive with timeout value of 7200) and at other side means connections between haproxy and apache shows status as FIN_WAIT on haproxy server and CLOSE_WAIT at apache side. I also see the huge memory swapping and apache taking the most of the memory. I did strace on apache process and did not find any information. strace gets attached to apache process but did not produce any output. The processlist on Mysql server show s those processes in sleep mode. The application on webserver is Magento a php application. if you need further information please let me know. Thanks.

  Read the article

• Apache with multiple domains, single IP, VirtualHost is catching the wrong traffic

  - by apuschak

  I have a SOAP web service I am providing on a apache web server. There are 6 different clients (IPs) that request data and 3 of them are hitting the wrong domain. I am trying to find a way to log which domain name the requests are coming from. Details: ServerA is the primary ServerB is the backup domain1.com - the domain the web service is on domain2.com - a seperate domain that server seperate content on ServerB ServerA is standalone for now with its own IP and DNS from domain1.com. This works for everyone. ServerB is a backup for the web service, but it already hosts domain2.com. I added entries into the apache configuration file like: <VirtualHost *:443> ServerName domain2.com DocumentRoot /var/www/html/ CustomLog logs/access_log_domain2443 common ErrorLog logs/ssl_error_log_domain2443 LogLevel debug SSLEngine on ... etc SSL directives ... </VirtualHost> I have these for both 80 and 443 for domain1 and domain2 with domain1 being second. The problem is when we switch DNS for domain1 from ServerA to ServerB, 3 out of the 6 clients show up in the debug logs as hitting domain2.com instead of domain1.com and fail their web service request because domain2.com is first in the apache configuration file and catching all requests that don't match other virtualhosts, namely domain1.com. I don't know if they are hitting www.domain1.com, domain1.com (although I added entries for both) or using the external IP address or something else. Is there a way to see which URL they are hitting not just the page request or someother way to see why the first domain is catching traffic meant for the second listed domain? In the meantime, I've put domain1.com higher in the apache configuration than domain2.com. Now it catches the requests for all clients and works, however I don't know what it is catching and would like to make domain2.com the first entry again with a correct entry for domain1.com, for however they are hitting it. Thank you for your help! Andrew

  Read the article

• 2 Computers, same network, different outgoing speeds when uploading to internet?

  - by user117339

  I have 2 work machines in my office, a PowerMac G5 and a MacBook Air. Both behind an IPCop firewall. The PowerMac is connected through a gigabit switch, the MacBook Air is connected through a Netgear 802.11g access point that is then plugged into the gigabit switch. There is also a FreeNAS box, both machines are able to read and write files to it at close to their pipe speeds. The main problem is when I am trying to upload files to the internet at large. The G5 is only hitting 0.1 - 0.25 Mbps. The Macbook is able to hit 2-3 Mbps. The setup (G5 / IPCop / Network) has been the same for 5 years. The issues with the internet speed started about 3 months ago. I hadn't tested on the Macbook at this point. I had complained to the ISP, they said their modem needed a firmware update, did that nothing changed. Reset IPCop, turned off squid, etc. No changes. The ISP switched the office over to a better plan with a theoretical 6 Mbps up, still no change. At this point I tried testing the Macbook, and lo and behold there's the speed. But why? I have tried changing out everything, cables, switches, using another ethernet port on the G5, wiping the system, using DHCP, using manual IPs, changing DNS servers, etc. Nothing works. I figured that if there was something horribly wrong with the network, then internally I would find a similar issue, but that is perfect. iperf, ping, etc show no dropped packets and near saturation of the internal network. I'm at a loss as to what the heck is going on. Any ideas would be appreciated! Below are some screenshots of speedtest.net: G5: Macbook Air:

  Read the article

• Kindle (client) for Mac--text search or highlighting/notes?

  - by doug

  just so we're clear, i'm talking about the client/software version here--ie, that you install on your Mac or PC--not the device. The Kindle client was recently released for the Mac. I downloaded it and bought a couple of Kindle-edition books to view on this client. Astonishingly, two features i consider to be more or less essential to any ebook reader are missing in the Kindle client, either that, or i can't find them: (i) text searching; and (ii) highlighting text. First, does anyone know how to access the search feature? I'm aware of the "Go To" button at the top middle of the reader window--the options in that menu when you click the button are: "Cover", "Table of Contents", "Beginning" and "Location." "Location" requires that you type in an integer (but it doesn't correspond to page number--e.g., typing "167" brought me to the table of contents), not a search term. Second, there's a button on the upper right-hand corner of the window "Show Notes and Marks" yet i can't find any way to highlight text. The only kind of "note" or "mark" i have been able to record is to "bookmark" a page by clicking the "bookmark" button also at the top of the window.

  Read the article

• Separated virtual networks with same subnet range with 2 interface

  - by Coolpet

  I'm having some problems with routing with the following: I have a server with 2 interfaces. It has 1-1 alias contains the same subnet. the 2 interface is connected to 2 switch, which are separated from each other. Infrastructure: Eth0 192.168.16.2/20 Eth0:eth0 192.168.1.222/20 Eth1 192.168.32.3/20 Eth1:eth1 192.168.1.223/20 I have a PC which has the IP address: 192.168.1.3/24 The problem is the next: If PC is on subnet 1, I can ping it. If PC is on subnet 2, I can't ping it. traceroute shows the route is across 192.168.1.222 ping -I 192.168.1.223 192.168.1.3 is not working on subnet 2. arp entries show the MAC address belonging to the correct interface (eth1 on subnet 2) How can I force the server to look on both interface same ranged subnet for specific IP? It searches only in the first subnet. The routing table has these 2 entries: 192.168.0.0/20 dev eth0 proto kernel scope link src 192.168.1.222 192.168.0.0/20 dev eth1 proto kernel scope link src 192.168.1.223

  Read the article

• MSMQ on Win2008 R2 won't receive messages from older clients

  - by Graffen

  I'm battling a really weird problem here. I have a Windows 2008 R2 server with Message Queueing installed. On another machine, running Windows 2003 is a service that is set up to send messages to a public queue on the 2008 server. However, messages never show up on the server. I've written a small console app that just sends a "Hello World" message to a test queue on the 2008 machine. Running this app on XP or 2003 results in absolutely nothing. However, when I try running the app on my Windows 7 machine, a message is delivered just fine. I've been through all sorts of security settings, disabled firewalls on all machines etc. The event log shows nothing of interest, and no exceptions are being thrown on the clients. Running a packet sniffer (WireShark) on the server reveals only a little. When trying to send a message from XP or 2003 I only see an ICMP error "Port Unreachable" on port 3527 (which I gather is an MQPing packet?). After that, silence. Wireshark shows a nice little stream of packets when I try from my Win7 client (as expected - messages get delivered just fine from Win7). I've enabled MSMQ End2End logging on the server, but only entries from the messages sent from my Win7 machine are appearing in the log. So somehow it seems that messages are being dropped silently somewhere along the route from XP or 2003 to my 2008 server. Does anyone have any clues as to what might be causing this mysterious behaviour? -- Jesper

  Read the article

• Oracle 11g Data Guard over a WAN

  - by Dave LeJeune

  Hi - We are in process of looking at using Oracle's Data Guard to replicate our 11g instance from a colo facility in Washington DC to Chicago. To give some basics we have approximately 25TB of storage and a healthy transaction rate in the 1-2K/sec range. Also, because we are processing data in real-time we have a 24x7x365 requirement for processing data. We don't have any respites as far as volume except for system upgrades (once every few months) where we take the system offline but then course experience a spike in transactions when we bring the system back on-line. Ideally we would want the second instance in the DG configuration semi-online in a read-only fashion for reports/etc. We evaluated DG in 10g and were not overly impressed and research seemed to show that earlier versions had issues with replication over a WAN but I have heard good things about modifications the product has gone through w/ 11g. Can anyone confirm an instance of this size and transaction rate being replicated over a WAN and if so what is the general latency? An information or experiences with a DG implementation that is of this size and scope would really be helpful (or larger - I also realize we are still relatively small compared to many others out there). Many thanks in advance.

  Read the article

• openvpn in a bridge?

  - by sebelk

  I have a somewhat tricky proble to solve. We have a wireless link between 2 building. One of them has an mikrotik and below there are some vlans. Some machines of one vlan need to use openvpn to connect to a remote private lan. I put a TP-Link WR1043ND (which those machines connect to) with openwrt with ebtables just in case I need it. I've configured openwrt in such a way that all ports belongs to the same vlan. My idea was to make things as transparent as I can. It has a bridge as follows: usr/sbin/brctl-full show br-lan bridge name bridge id STP enabled interfaces br-lan 8000.f8d111565716 no eth0.1 eth0.2 Also I've added an ebtables rule: ebtables -t broute -A BROUTING -p ipv4 -j DROP So "bridge" has only one IP address. I've installed openvpn and I'm trying to bring up the tunnel but I can't still get working. Sure, someone can says why don't you use the vpn on the mikrotik, there are some reasons, the first one is I have little experience with mikrotik and I'd want to have the vpn at hand :) The problem is that openvpn is not working, because it is complaining that I have only one Ip Address on the server side. So I set up and alias interface with another IP address but is not working either: : Rejected connection attempt from IP-Client-Side:37801 due to --remote setting Is there a way to make it work?

  Read the article

• Diff bios - corrupt video driver

  - by sfonck

  Hi, I'm using an Dell M90 Precision Laptop which has a NVidia Quadro FX 2500M graphics card and is running Windows XP. Laptop has been running fine - but a few weeks ago screen went 'white' - restarted computer- bios and startup screens show weird green dots and stripes, normal startup only shows a black screen... only VGA mode works to display something. I've been trying to remove and reinstall the correct drivers downloaded from Dell's website - no solution. I gave up and reinstalled XP - everything was working perfect again. 2 weeks later - again the white screen - tried everything again (flashin new bios also - nothing works) Reinstalled XP - everyhting was working again, so I made a DriveSnapShot of the partition. Today - again the 'white screen'. Ok, no problem ...I was thinking all I needed to do was to restore the DriveSnapShot backup... Few minutes later the backup is restored ... but guess what: video driver does not work correctly... As the DriveSnapShot restored the complete partition, as it was at the time everything was working perfectly, this would mean my driver problems are due to 'settings' in the bios or on the graphics-card itself + these 'settings' can get overridden by doing a new XP-install.... I'm out of options, can somebody help me to find a solution for this problem: Is there some way to backup and restore a bios after seeing some problems? Is there some way to know what is causing this problem like a bios diff utility? Thanks!

  Read the article

• How can see what processes makes my server slow?

  - by Steven

  All my websites on my server are extremely slow or not loading at all. Even server admin (Plesk) will not load some times. There's been no changes to the sites for the last coupple of months. How can I see what processes is making my server slow? My environment looks like this: Server: VPS running Linux 2.8.x OS: Centos 5 Manage interface: Plesk 9.x Memmory: 1024MB CPU: 2.2GHz My websites run on PHP and MySQL. I finally managed to telnet (Putty + SSH) in to my server. Running top did not show any processes using more than max 2% CPU and none were using exesive memmory. I also got a friend to install a program that checks the core files, and all seemed fine. So I'm leaning towards network issues or some other server malfunction. But I'm not able to find out what can be wrong. Here are some answers to Sean Kimball: I don't run mail services on my server yet There are noe specific bandwidth peaks. Prefork looks like this <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 </IfModule> Not sure what you mean with DNS question. But I think it's up and running. There are no processes running wild Where can I find avarage load? Telnet is disabled and I have to log in using SSH :)

  Read the article

• Fake demostration software for command line

  - by Joe

  I'm looking for some software that would be useful for giving demonstrations. I regularly have to show the effects of scrips ect to classes while talking about their effects, and equaly regularly I have finger trouble and have to rewrite various commands - wasting class time and general energy. I'd like to be able to record a sequence of commands in advance, and then play them back at the speed of my choosing. So I might have a file that containes the commands: echo "hello world!" ls ls -l ls -l | sort I'd like to be able to play these commands back by typing similar ones in. So I'd have a blinking command prompt and if I typed 'echo "hxxx' the command prompt would read home$echo "hell and if I typed any other letters the terminal would fill up with the remainder of the command until I press enter, when it executes the command. The point is that even if I screw up the command when typing it, the command that I'd prepared in advance would be executed. My question is - does similar software exist for giving demonstrations? or even, is this an easy thing to script up...? EDIT - two quick things first of all I'm on osx - but it would be nice to get a general solution for other people who arrive here from google. and second a lot of the comments/answers are concentrating on, in effect, making it fast and easy to enter long commands by means of hotkeys and the like. Actually I'd like it to at least look like I'm typing live - that's why I put in the bit about the one-to-one keymapping, but I don't think I explained that quite as well as I could have...

  Read the article

• Disable all the idiot-checking in Mac OS X

  - by Fake Name

  I am a Windows/Linux user, who is learning Mac OS X out of interest in doing dev-work for the iPad which I recently purchased. However, OS X is driving me nuts by trying to protect all it's system files, hiding all of the important OS components I want to tweak, and generally making it impossible to do any modification to the OS in general to make it more usable. Therefore, is there a way to turn off all the idiot-checking in Finder? On XP, I can disable "Hide Protected Operating system files" and set "Show Hidden Files". On linux, there really aren't many hidden files, and changing the configuration for .files is easy enough in Gnome and XFCE. How can I set up OS X in a similar way. I am not new to computers, and I am fully aware that deleting system files can damage or even irreparably disable a OS install. Therefore, If I intentionally try to delete a file, or move something, it's probably intentional, and I am willing to accept the consequences in any case. At this point, I have fallen back to doing everything through the command line (which takes forever), because Finder is practically unusable. (As for what I am attempting to do, I also asked about GUI changes here.)

  Read the article

• lamp -- edit PHP file but doesn't change web output -- including die()

  - by Reid W

  Server is standard Linux server on Amazon Web Services. Cent OS 5/Apache/PHP 5.3. No APC. It's worked fine for over a year, but now when I edit some but not all PHP files on the server using vi, the changes don't affect the web output. For example, I edit myfile.php and put a die() at the top, but when I load the page in my web browser, instead of the die() I see the content that would show up if the die() weren't there. svn updating the file in question doesn't help either. Files are on an Amazon EBS partition symlinked to /var/www/html. Just to reiterate -- this has worked fine for a long time. Restarting apache didn't help, nor did rebooting the server. What's weird is that it's just some of the files but not all. File ownership/permissions are the same for the "good" and "problem" files. I'm not a Linux newbie but am at a complete loss with this, and couldn't find anything on Google either. Any hints would be much appreciated!

  Read the article

• Copied a file with winscp; only winscp can see it

  - by nilbus

  I recently copied a 25.5GB file from another machine using WinSCP. I copied it to C:\beth.tar.gz, and WinSCP can still see the file. However no other app (including Explorer) can see the file. What might cause this, and how can I fix it? The details that might or might not matter WinSCP shows the size of the file (C:\beth.tar.gz) correctly as 27,460,124,080 bytes, which matches the filesize on the remote host Neither explorer, cmd (command line prompt w/ dir C:\), the 7Zip archive program, nor any other File Open dialog can see the beth.tar.gz file under C:\ I have configured Explorer to show hidden files I can move the file to other directories using WinSCP If I try to move the file to Users/, UAC prompts me for administrative rights, which I grant, and I get this error: Could not find this item The item is no longer located in C:\ When I try to transfer the file back to the remote host in a new directory, the transfer starts successfully and transfers data The transfer had about 30 minutes remaining when I left it for the night The morning after the file transfer, I was greeted with a message saying that the connection to the server had been lost. I don't think this is relevant, since I did not tell it to disconnect after the file was done transferring, and it likely disconnected after the file transfer finished. I'm using an old version of WinSCP - v4.1.8 from 2008 I can view the file properties in WinSCP: Type of file: 7zip (.gz) Location: C:\ Attributes: none (Ready-only, Hidden, Archive, or Ready for indexing) Security: SYSTEM, my user, and Administrators group have full permissions - everything other than "special permissions" is checked under Allow for all 3 users/groups (my user, Administrators, SYSTEM) What's going on?!

  Read the article

• CentOS server. What does it mean when the total used RAM does not equal the sum of RES?

  - by Michael Green

  I'm having a problem with a virtual hosted server running CentOS. In the past month a process (java based) that had been running fine started having problems getting memory when the JVM was started. One strange thing I've noticed is that when I start the process, the PID says it is using 470mb of RAM while the 'used' memory immediately drops by over a 1GB. If I run 'top', the total RES used across all processes falls short of the 'used' listed at the top by almost 700mb. The support person says this means I have a memory leak with my process. I don't know what to believe because I would expect a memory leak to simply waste the memory the process is allocated not to consume additional memory that doesn't show up using 'top'. I'm a developer and not a server guy so I'm appealing to the experts. To me, if the total RES memory doesn't add up to the total 'used' it indicates that something is wrong with my virtual server set-up. Would you also suspect a memory leaking java process in this case? If I use free before: total used free shared buffers cached Mem: 2097152 149264 1947888 0 0 0 -/+ buffers/cache: 149264 1947888 Swap: 0 0 0 free after: total used free shared buffers cached Mem: 2097152 1094116 1003036 0 0 0 -/+ buffers/cache: 1094116 1003036 Swap: 0 0 0 So it looks as though the process is using (or causing to be used) nearly 1GB of RAM. Since the process (based on top is only using 452mb, does that mean that the kernal is all of a sudden using an additional 500mb?

  Read the article

< Previous Page | 700 701 702 703 704 705 706 707 708 709 710 711  | Next Page >