Search Results

Search found 23472 results on 939 pages for 'show'.

Page 700/939 | < Previous Page | 696 697 698 699 700 701 702 703 704 705 706 707  | Next Page >

• CentOS 5.7 issues with iptables

  - by Corey Whitaker

  I'm trying to set up IPTables on a new CentOS server. This server will function as an FTP server that I need to be accessible from the outside, however, I want to lock down SSH to only accept internal IP connections. I need to allow SSH for 10.0.0.0/8 and 172.16.132.0/24. Below I've posted my /etc/sysconfig/iptables file. Whenever I apply this, I essentially lock myself out and I have to access it via console using Vsphere. Can somebody show me what I'm doing wrong? I'm connecting from my laptop with an IP of 172.16.132.226. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [115:15604] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -p icmp -m icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -p esp -j ACCEPT -A RH-Firewall-1-INPUT -p ah -j ACCEPT -A RH-Firewall-1-INPUT -d 224.0.0.251 -p udp -m udp --dport 5353 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A RH-Firewall-1-INPUT -s 10.0.0.0/8 -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -s 172.16.132.0/24 -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 20 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 21 -j ACCEPT -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited COMMIT

  Read the article

• Why database partitioning didn't work? Extract from thedailywtf.com

  - by questzen

  Original link. http://thedailywtf.com/Articles/The-Certified-DBA.aspx. Article summary: The DBA suggests an approach involving rigorous partitioning, 10 partitions per disk (3 actual disks and 3 raid). The stats show that the performance is non-optimal. Then the DBA suggests an alternative of 1 partition per disk (with more added disks). This also fails. The sys-admin then sets up a single disk, single partition and saves the day. The size of disks was not mentioned but given today,s typical disk sizes (of the order of 100 GB), the partitions ; would be huge, it surprises me that a single disk with all partitions outperformed. Initially I suspect that the data was segregated and hence faster reads. But how come the performance didn't degrade as time went by with all the inserts and updates happening? Saw this on reddit, but the explanation was by far spindle/platter centered. There was no mention in the article about this. Is there any other reason? I can only guess that the tables were using a incorrect hash distribution causing non-uniform allocation across disks (wrong partitioning); this would increase fetch times. Any thoughts?

  Read the article

• VPS Memory Exchausted Even With Light Settings

  - by user101570

  Linux noob here. I have a 256MB VPS on Ubuntu 11.04 server and when I run "free -m" the result shows all memory being used (including the second line re: buffers/cache). I found this very strange, considering I only have 5 Apache processes running each chewing up about 20MB each. MYSQL is taking up 30MB. To my knowledge, and according to "top", I have no other memory hogs operating. Settings that may be relevant: PHP memory_limit = 32M MYSQL key_buffer = 16M Prefork MPM Maxclients = 10 So when I reviewed these settings, I naturally thought maxclients was too high, so I tried switching it to 5. Now not only does my memory still show as being 100% used, my website loads much, much slower, despite not getting any traffic aside from mine at the moment. I don't understand this. I thought a single Apache process handles all requests from a client received within the "KeepAliveTimeout" window, which I've set to 2 seconds. With my initial config. of 10 maxclients, my page load times are around .3ms, so a single process should handle that no problem, correct? So next I went to an extreme level of 1 for maxclients. My memory is still at 100% usage and my site loads painfully slow. I'm a noob at a complete loss here. According to the many tutorials I've read on basic server setup, I should be good to go. Help! Please! Edit: total used free shared buffers cached Mem: 256 256 0 0 0 0 -/+ buffers/cache: 256 0 Swap: 0 0 0

  Read the article

• MySQL config for 2GB ram

  - by Tiffany Walker

  How is my config? Does it work well for 2GB? What would be an ideal config for a 2GB ram server? [mysqld] set-variable = max_connections=500 log-slow-queries safe-show-database local-infile=0 skip-networking symbolic-links=0 max_connections = 500 key_buffer = 256M myisam_sort_buffer_size = 64M join_buffer_size = 2M read_buffer_size = 2M sort_buffer_size = 2M read_rnd_buffer_size = 2M thread_concurrency = 16 table_cache = 1024 thread_cache_size = 50 wait_timeout = 7200 connect_timeout = 10 tmp_table_size = 32M max_allowed_packet = 160M max_connect_errors = 10 query_cache_limit = 1M query_cache_size = 32M query_cache_type = 1 [mysqld_safe] open_files_limit = 8192 [mysqldump] max_allowed_packet = 16M [myisamchk] key_buffer = 64M sort_buffer = 64M read_buffer = 16M write_buffer = 16M UPDATE 2012-03-28 12:58 EDT By RolandoMySQLDBA Please run these queries and paste them into your question: For MyISAM SELECT CONCAT(ROUND(KBS/POWER(1024, IF(PowerOf1024<0,0,IF(PowerOf1024>3,0,PowerOf1024)))+0.4999), SUBSTR(' KMG',IF(PowerOf1024<0,0, IF(PowerOf1024>3,0,PowerOf1024))+1,1)) recommended_key_buffer_size FROM (SELECT LEAST(POWER(2,32),KBS1) KBS FROM (SELECT SUM(index_length) KBS1 FROM information_schema.tables WHERE engine='MyISAM' AND table_schema NOT IN ('information_schema','mysql')) AA ) A, (SELECT 2 PowerOf1024) B; For InnoDB SELECT CONCAT(ROUND(KBS/POWER(1024, IF(PowerOf1024<0,0,IF(PowerOf1024>3,0,PowerOf1024)))+0.49999), SUBSTR(' KMG',IF(PowerOf1024<0,0, IF(PowerOf1024>3,0,PowerOf1024))+1,1)) recommended_innodb_buffer_pool_size FROM (SELECT SUM(data_length+index_length) KBS FROM information_schema.tables WHERE engine='InnoDB') A, (SELECT 2 PowerOf1024) B;

  Read the article

• Why won't Media Monkey add one particular folder of mp3's?

  - by ChrisF

  I'm using the latest and greatest version on Media Monkey (free version) and it won't find the mp3's in one particular folder in my music tree. It can see all the other files in the tree and the folder shows up when I click Add/Rescan files to the library... I have full control over the folder and all the files in the folder. The files play in Windows Media Player. The files play in Media Monkey if I right click and play from the context menu. All the tracks are at least 2 minutes long and over 5MB long and Media Monkey is set to ignore files shorter than 20KB and include all files regardless of length. There was an issue in that the that the genre of the tracks was set to "Classical" and the option that allows you to browse the classical music independently of the other music isn't enabled in the free version. It's a Gold version option only. I hadn't spotted that my other classical music was also missing from the library (I have rather a large library). Once I retagged the music with a different tag and tried to add the files again it reported that it added the tracks, but they still didn't show up in the library.

  Read the article

• DVD-burner disappears when using grub

  - by drblah

  This is a rather annoying problem I have with Linux on my laptop. Whenever I install any Linux distro that relies on grub (which is about 99 % apparently) it will mess up my DVD-drive and the drive will not be recognized after booting, no matter the OS (Ubunntu, Arch, Windows Vista or 7). I know the problem has nothing to do the DVD-drive itself, because I bought a new one a few months ago. I am also sure that grub is messing the drive up, because I have tried to use LILO, which worked fine (except for horrible boot times.) This problem have persisted through about 3-4 years and it is a pretty bad show stopper whenever I want to work with Linux. I had hoped it would get fixed over time, but no one seems to have the exact problem I have. The drive is connected with an IDE connection. Update: The old drive was a Toshiba Samsung SN-S082. I don't know the model number of the new one, but it is HP (I think). Things I have tried to fix it: Mess about with some BIOS settings like enabling AHCI and change some IDE settings. Installing a different boot loader DOES fix the problem but I would like to use grub.

  Read the article

• Wifi Works with Android and Windows 8 but not Linux and Win 7

  - by eramm

  Support has told me that our company wide wifi network is setup to support mobile phones only. However it doesn't make sense to me that they can identify a mobile device rather they have setup the Access Point to use a protocol that is only supported on Android and Windows phones. Because the Access Point supports Windows mobile this means that laptops running Windows 8 can also connect to the Access Point (proven). So it stands to reason that since Android is based on Linux there must be a way to connect using Linux as well. iwlist shows IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : 802.1x WIreshark seems to show that a connection is being made to a website to get a certificate and use a Domain Controller for authentication. Questions: 1) what protocol could they be using that is supported on Win Mobile and Android but not on Win 7 and Linux (Debian) ? 2) what tools can I use to help me discover what protocol i need to support ? I have used iwlist and wireshark but I was not able to glean to much useful information from them. I can post the results if needed. 3) is there an app i can use on my Android phone to help me understand what kind of network it is connecting to ? I can provide more information if you tell me how to get it. I just don't know what I am looking for.

  Read the article

• Share one ssl certificate between multiples vhost

  - by Cesar

  I have a setup like this: <VirtualHost 192.168.1.104:80> ServerName domain1 DocumentRoot /home/domain/public_html ... </VirtualHost> <VirtualHost 192.168.1.104:80> ServerName domain2 DocumentRoot /home/domain2/public_html ... </VirtualHost> <VirtualHost 192.168.1.104:80> DocumentRoot /home/domain3/public_html ServerName domain3 ... </VirtualHost> <VirtualHost 192.168.1.104:443> ServerName domain3 SSLCertificateFile /usr/share/ssl/certs/certificate.crt SSLCertificateKeyFile /usr/share/ssl/private/private.key SSLCACertificateFile /usr/share/ssl/certs/bundle.cabundle ... </VirtualHost> I want to use domain3 certificate in the other domains, preferably without having to repeat all the <VirtualHost 192.168.1.104:443> config. In other words I want something like this: If the vhost has no explicit ssl config use cert for domain3 (/usr/share/ssl/certs/certificate.crt) Notes: 1.- I for sure will be setting more vhosts in the future 2.- I know (and don't care) of the ssl warnings the browser will show (hostname mismatch) If this possible? how?

  Read the article

• QR Codes Printing, but Not Printing Correctly - Any Ideas?

  - by SDS

  I am mail merging some QR codes via file paths stored in Excel into a label template in MS Word 2013. I have the whole process with the Ctrl+F9 working properly, but I am stumped on this: On the 30 label sheet I am trying to print I have 6 labels that are repeating information, and stored in duplicated rows in Excel for this print job. All of the labels have 2 images on them, one is a logo and the other one is a unique QR code for that person. For the first set of 6 labels that print out, everything works perfect. However, from the 2nd time the information is printed onward all of the merged fields and logo look correct, but the QR codes are printing strangely. Basically it's the QR code as I want it, but with a copy of itself covering the top left 25% of the QR code. Print preview doesn't show this happening, only once it's printed does it come out like this. I've been trying everything I can think of to fix this and don't know what to do. So far I've: Recreated the document several times, tried duplicating the images in the source folder and giving the links in the Excel document new file paths in case the mail merge feeding from the same .jpg was an issue (even though it's not a problem with the logo) Any help or insight is greatly appreciate because this is a test run for a larger batch run that I need to get done soon :( Thank you!

  Read the article

• Measure Upload Speed between a client and our server

  - by tresstylez

  We host a SAAS application specially customized for multiple clients. For one customer in particular -- they are reporting sporadic performance issues from various locations on their network, in particular UPLOADING documents through a form on our website. The client claims they have "bandwidth to spare" and that utilization of their "pipe" is so low that it MUST be our application, but our application has MANY clients and all features are working fine for all other clients. Interestingly enough -- DOWNLOADS (ie. just accessing the website, or downloading documents) is working fine. Speed test shows that they should get 1.2Mbps UP. So, a 3MB file should take 20 secs to upload. It takes 60+ seconds on their network. Sometimes even small files take OVER 10 minutes to upload or they timeout. Pings and Traceroutes don't show any abnormally long hops or response times. They claim other SAAS applications they use allow them to upload just fine. Both IT teams are working together to resolve this issue. What kind of data can I request from the clients to begin ruling things out. Seems like we need to somehow measure LATENCY of the networks involved or even at the switch level, we need to understand if packets are getting dropped somewhere and why. Where should I start? Any help is appreciated. I'll provide more info upon requests

  Read the article

• Weird glitches on Intel iGPU

  - by FrederikVds

  I have a weird problem that I can't manage to describe in one word, so I'm having trouble searching for a solution. My monitors sometimes go black for a tenth of a second. Other times, they show the image shifted a few centimeters to the left or to the right. This happens on both of my monitors, but not necessarily at the same time. I would say it happens about once a minute, unless under heavy load, in which case it can happen every second or so. Interestingly, heavy CPU/memory usage can also cause this, not just heavy GPU usage. This only happens when they are both at 1920x1080, not when one of them, or both, are at a lower resolution. It also happens when they are in mirrored mode instead of extended desktop mode. My GPU is obviously not at full clock speed most of the time: this happens at 350 MHz as well as at 1200 MHz. So it doesn't seem like a matter of too little performance. I'm not seeing any traditional artefacts, even when I use MSI Kombustor, only this kind of full-screen glitches. CPU stressing software isn't reporting any issues either. I'm thinking maybe the connection between my CPU and my PCH isn't fast enough, but I can't find anyone with the same problem to confirm that. I'd rather not invest in a discrete GPU without being certain it will fix something. Does anyone know how to search for this, or even better, does anyone have a solution? My full specs are below. Thanks in advance! Specs: ASUS P8Z77-M Intel Core i5-3570K (with Intel HD 4000 Graphics) 2x4 GB AMD Performance Edition memory Corsair Force 3 Series Rev. B 120GB SSD Maxtor 200GB HD Lite-On DVD-RW Antec 350 Watt PSU 64-bit Windows 7 Professional 2x Iiyama ProLite E2208HDS display

  Read the article

• Vim clobbering scrollback buffer outside of screen

  - by dotancohen

  If I'm not in a screen session, then when exiting Vim I get a bash prompt below the remnants of the VIM window. A side effect of this is that my scrollback buffer is clobbered, especially if I have paged through a long file in VIM. The problem only occurs if I'm not in screen, inside a screen window VIM exits to show the bash prompt and the previous lines just as before. I tried adding sett_ti=t_te= to my .vimrc to fix the problem, but the only effect that it has was to break VIM such that the problem occurs inside screen as well as outside. Thus, I removed the line. For good measure I do have altscreen on in .screenrc. This is on Ubuntu Server 12.04.1 LTS, with Bash 4.2.24, Screen 4.00, and VIM 7.3 (not vim-tiny), accessed over SSH in Cygwin version NT-6.1-WOW64 on a Windows 7 laptop. Thanks. EDIT: Note that in the same Cygwin install I can SSH into a different server (CentOS) and there VIM does not clobber the scrollback buffer. Therefore, I do not suspect a Cygwin issue. The CentOS machine does not have screen installed, and I did not have to add set t_ti= t_te= to .vimrc.

  Read the article

• Starting old computer - nothing shown on screen at boot

  - by Jonas

  I'm trying to start an about 10 years old PC computer. But nothing is shown on the screen, and it beeps everytime I press a key on the keyboard. I can press Ctrl+Alt+Del to reboot the computer. The monitor is newer and seem to work with other computers. I don't see anything from POST/BIOS at start or later. I have tried to change to another graphic card, but it didn't change anything. What can I do to solve this problem? Update: I have now tried with another computer (the one where the "another graphic card" came from) and I got the same problem. I doesn't show anything on the screen. Both these computers had a GeForce2 MX 400 graphic card. I tried with another computer screen it didn't work - it was showing "signal out of range". So is the graphic card GeForce2 MX 400 too old for newer TFT-monitors? I tried with a third computer so I know that the monitors are working, and both monitors work fine with that computer.

  Read the article

• Managing SharePoint permissions via Active Directory?

  - by rgmatthes

  My company has thousands of employees organized thoroughly via Active Directory. I have confidence in the accuracy of the Department and Title information displayed in the user profiles. I'm helping to put up a brand new SharePoint 2007 site, and I contacted IT about managing the site's permissions through AD Groups. The goal is to have the site automatically assign read/write/contribute/whatever permissions based on the information in AD. For example, we could create an AD Group called "Managers" that would contain anyone with the "Manager" title in their AD user profile. I would have SharePoint tap into this AD Group to mass assign permissions if I knew all managers would need a certain level of access (read/write/contribute/whatever). Then if a manager joins the company or leaves it, the group is automatically updated (provided AD gets updated, of course). My IT rep called back and said it couldn't be done. This seems like a pretty straightforward business requirement, and one of the huge benefits of having Active Directory, but maybe I'm mistaken. Could anyone shed some light on this? A) Is it possible to use dynamically-updated AD Groups when assigning permissions via SharePoint? (Does anyone know of a guide I could show my doubtful IT rep?) B) Is there a "best practice" way to go about this? I've read some debate on whether SharePoint Groups or AD Groups are the way to go. My main concern is dynamic updating. C) If this isn't available out of the box, can someone recommend third-party software that will provide the functionality I'm looking for? A big thanks to anyone who can help me out!!

  Read the article

• Changing the Start Menu Power Button - Setting does not work: only (Shut down) is available

  - by Martin

  This is the second time I try to change this setting on a Vista based OS and I can't get it to work again. OS: Windows Server 2002 SP2 (not R2) = Microsoft Windows [Version 6.0.6002] = Vista When I go to: Power Options - Change Plan Settings - Change advanced power settings - Power buttons and lid - Start menu power button - Setting: the available combo box will only show the option Shut down. No other options are available. This server is part of a domain and has not been set up by me. I have not yet talked with the domain admin, but as far as I could tell from googling, only Win7 has group policy options for the start menu. (And yes, OC I will talk to the domain admin to see if he has any clue - which I doubt.) (Edit: I have now talked to our domain admin, and he's got no clue either.) I'm responsible for this server and a local administrator but not a domain administrator. I switched off User Account Control (UAC) yesterday without problems. Since I always log into this machine via RDP and this being a server, the natural choice would be the option (Log out) and not (Shut down). What can I do to fix it or to find out why it cannot be changed? Thanks!

  Read the article

• Connection timed out on Node.js app running under CentOS

  - by ss1271

  I followed this tutorial to create a simple node.js app on my CentOS: the node.js version is: $ node -v v0.10.28 Here's my app.js: // Include http module, var http = require("http"), // And url module, which is very helpful in parsing request parameters. url = require("url"); // show message at console console.log('Node.js app is running.'); // Create the server. http.createServer(function (request, response) { request.resume(); // Attach listener on end event. request.on("end", function () { // Parse the request for arguments and store them in _get variable. // This function parses the url from request and returns object representation. var _get = url.parse(request.url, true).query; // Write headers to the response. response.writeHead(200, { 'Content-Type': 'text/plain' }); // Send data and end response. response.end('Here is your data: ' + _get['data']); }); // Listen on the 8080 port. }).listen(8080); However, when I uploaded this app onto my remote server (assume the address is 123.456.78.9), I couldn't get access to it on my browser http://123.456.78.9:8080/?data=123 The browser returned Error code: ERR_CONNECTION_TIMED_OUT. I tried the same app.js code which runs fine on my local machine, is there anything I am missing? I tried to ping the server and its address was reachable. Thanks.

  Read the article

• IIS7.5 - about app pool ID's and folder read/write access

  - by merk

  I did some searching and it looks like for each app pool, there should be an account created called IIS APPPOOL\AppPoolName - however i can see no such account when i try to modify the permissions on a folder to give that app write access. The closest I have found is the IIS_IUSRS group. Now, if i go into that group and look at the members, i see several IIS APPPOOL\PoolName members. But where are these members coming from? Why don't they show up under the users? And why can't i add a specific one to a folder? It doesn't make sense to me to add the IIS_IUSRS group to a folder since they gives every site access to the folder. To be more specific, I'm setting up wordpress and it unfortunately wants write access to the root folder. So i want to restrict it as much a possible. I was trying to figure out how to set it so that the WP root folder has write access only for the ID that the blog's app pool is running under. When i drill down into the IIS_IUSRS group, i do not see the app pool for the blog listed there. The settings for the blog's app pool are: No managed code, Classic, ApplicationPoolIdentity, and it's named 'blog' So any explanations regarding these users that are created for the app pools, and why the blog doesn't seem to belong to the iusrs group? thanks

  Read the article

• Windows 8 Install Hanging at first white-font boot splash

  - by Omega

  I'm trying to install the Windows 8 preview on my Samsung Series 9 (2012, Ivy Bridge). I've done a bit of a custom scheme with this one: I'm using EFI/UEFI on this system. I've seen no indication that this system supports secure boot (yay!) My SSD is set up with GPT Ubuntu is already installed and working great via UEFI. I'm trying to boot the Windows 8 install from a USB stick via UEFI I don't have access to a CD drive. The problem is that the boot seems to hang at the very first splash screen that looks like this. White windows font, the little beads don't show up. My USB stick has an activity light and it does blink for the first few seconds, but then goes back to it's "nobody is talking to me" idle pulse. What I know: UEFI booting is definitely working. Windows 8 for those few seconds seems to have some kind of access to the USB drive. My Series 9 is running the latest BIOS/firmware. Any idea what I might be able to do to get Windows 8 installed??

  Read the article

• Strange IP address showing up with OS X ssh

  - by user50799

  I was futzing around with DTrace on Mac OS X and found the following script that prints out information about connections being established: $ cat script.d syscall::connect:entry { printf("execname: %s\n", execname); printf("pid: %d\n", pid); printf("sockfd: %d\n",arg0); socks = (struct sockaddr*)copyin(arg1, arg2); hport = (uint_t)socks->sa_data[0]; lport = (uint_t)socks->sa_data[1]; hport <<= 8; port = hport + lport; printf("Port number: %d\n", port); printf("IP address: %d.%d.%d.%d\n", socks->sa_data[2], socks->sa_data[3], socks->sa_data[4], socks->sa_data[5]); printf("======\n"); } I run it in one window: $ sudo dtrace -s ./script.d Then I ssh to another machine from another window. I get this output from my dtrace window: CPU ID FUNCTION:NAME 0 18696 connect:entry execname: ssh pid: 5446 sockfd: 3 Port number: 22 IP address: 192.168.0.207 ====== 0 18696 connect:entry execname: ssh pid: 5446 sockfd: 5 Port number: 12148 IP address: 109.112.47.108 ====== ^C The first IP address I can explain (192.168.0.207), that's the machine I'm connecting to. But what's with the 109.112.47.108 machine? It doesn't show up in tcpdump nor netstat -an Is there something with my dtrace code or my understanding of how the connect system call works?

  Read the article

• Is there a utility to visualise / isolate and watch application calls

  - by MyStream

  Note: I'm not sure what to search for so guidance on that may be just as valuable as an answer. I'm looking for a way to visually compare activity of two applications (in this case a webserver with php communicating with the system or mysql or network devices, etc) such that I can compare the performance at a glance. I know there are tools to generate data dumps from benchmarks for apache and some available for php for tracing that you can dump and analyse but what I'm looking for is something that can report performance metrics visually from data on calls (what called what, how long did it take, how much memory did it consume, how can that be represented visually in a call stack) and present it graphically as if it were a topology or layered visual with different elements of system calls occupying different layers. A typical visual may consist of (e.g. using swim diagrams as just one analogy): Network (details here relevant to network diagnostics) | ^ back out v | Linux (details here related to firewall/routing diagnostics) ^ back to network | | V ^ back to system Apache (details here related to web request) | | ^ response to V | apache PHP (etc) PHP---------->other accesses to php files/resources----- | ^ v | MySQL (total time) MySQL | ^ V | Each call listed + time + tables hit/record returned My aim would be to be able to 'inspect' a request/range of requests over a period of time to see what constituted the activity at that point in time and trace it from beginning to end as a diagnostic tool. Is there any such work in this direction? I realise it would be intensive on the server, but the intention is to benchmark and analyse processes against each other for both educational and professional reasons and a visual aid is a great eye-opener compared to raw statistics or dozens of discrete activity vs time graphs. It's hard to show the full cycle. Any pointers welcome. Thanks! FROM COMMENTS: > XHProf in conjunction with other programs such as Perconna toolkit > (percona.com/doc/percona-toolkit/2.0/pt-pmp.html) for mySQL run apache > with httpd -X & (Single threaded debug mode and background) then > attach with strace -> kcache grind

  Read the article

• Computer freezing while watching Flash videos from net

  - by t3st

  I have a Windows 7 home basic, while watching videos from net (within 5 minutes) computer starts to freeze and shows 100 percent CPU usage. I first thought it's a browser issue but watching videos from different browsers also has the same issue. My system runs the latest Firefox browser and all my plugins (including Flash) is up-to-date. After this when I shutdown/restart the computer it will go to the login window with out any problem. From there when I tried to log in to any account, the system starts to freeze and again I have to start and run Windows in safe mode (which doesn't show any problem). I read it in an article to do these steps CMD->sfc/scannow chkdsk after that only my system works normally, even now I can't watch any videos on the net otherwise it starts freezing( I can watch downloaded videos in computer without a problem) and have to do the whole process once more (which takes a lot of time). while running sfc/scannow its showed results that some of the files are corrupted and it could not be repaired. Can this be the cause for freezing of my computer while running Flash videos? or is it a hardware related problem? What different steps do I have to take to correct those corrupt files? System restore works only some times.

  Read the article

• Permission denied (publickey,gssapi-with-mic,password) ssh error

  - by zentenk

  Heads up I'm a noob with linux and networking. I set up a ubuntu server and I have a static ip for my network. When I try to connect to the server at home (external), it prompts me to log in. I supply the correct password (or incorrect pw), I get the error Permission denied, please try again. and after 3 times I get Permission denied (publickey,gssapi-with-mic,password) I am however able to connect with SSH from another computer in the same network with ssh < internal ip of server > I'm connecting with mac os x and my config file is vanilla. Note: During installation of ubuntu it says I don't have a default route or something while doing auto network configuration, but I ignored it and continued the installation, could this be the problem? EDIT: I have tried the below, I have nothing in hosts.allow and also iptables shows the ports that I have allowed, which is 22. I checked the auth.log, and there is nothing when I connect to it remotely (even when it says permission denied). I have tried connecting to it internally and the correct authentication logs show. Any idea whats wrong?

  Read the article

• Cannot destroy ZFS snapshot: dataset already exists

  - by Morven

  I have a server (T5220, though I doubt it matters) running Solaris 10 8/07 and I have a ZFS pool, "mysql", on internal disk. Within it I have a filesystem "mysql/data/4.1.12", which I snapshot hourly with a script from cron. I have one snapshot, created as one of those hourly snaps, that will not destroy. I have renamed it out of sequence to be "mysql/data/4.1.12@wibble" so that my script will not try and fail to destroy it, but it was originally within the sequence, though I doubt that matters. It renames successfully. The snapshot can be successfully navigated and read from through the .zfs/snapshots directory. It has no clones based on it. Trying to destroy it does this: (265) root@web-mysql4:/# zfs destroy mysql/data/4.1.12@wibble cannot destroy 'mysql/data/4.1.12@wibble': dataset already exists (266) root@web-mysql4:/# which is apparently nonsensical: of course it already exists, that's the point! Anyone seen anything like this before? Web searches show nothing obviously similar. I can provide patches installed if necessary.

  Read the article

• unicorn and nginx, went wrong

  - by achempion

  I try to deploy my app via capistrano. It was done, but when I start to nginx and show my site in the browser I see 'We're sorry, but something went wrong.' It is bad. I use unicorn. See my configs https://gist.github.com/3904032 I try to start server via rails s -e prodiction and it's work! I think that this error may be because I can't restart server root@li272-194:~# /etc/init.d/nginx restart Restarting nginx: the configuration file /etc/nginx/nginx.conf syntax is ok configuration file /etc/nginx/nginx.conf test is successful [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: still could not bind() nginx. any ideas? nginx log 2012/10/17 02:57:41 [error] 3271#0: *1 could not find named location "@myapp", client: 91.192.62.77, server: 178.79.153.194, request: "GET / HTTP/1.1", host: "178.79.153.194" 2012/10/17 02:19:08 [crit] 2448#0: *8 connect() to unix:/srv/zarcon/shared/unicorn.sock failed (2: No such file or directory) while connecting to upstream, client: 91.192.62.77, server: zarkon, request: "GET / HTTP/1.1", upstream: "http://unix:/srv/zarcon/shared/unicorn.sock:/", host: "178.79.153.194"

  Read the article

• Fresh install CentOS 6.4 64b with directadmin slowly consumes all memory and crashes

  - by Coen Ponsen

  Dear server fault community, This is my first question on server fault, i'm new to server (mis)configuration so please forgive me for asking something stupid :) I'm running Directadmin on a CentOS 6.4 64b with 4GB memory and over 10000Gh virtual machine. I migrated my websites because my former vps couldn't keep up anymore. Only half of the websites from this 1GB machine were migrated jet. So the migration is still in progress and already my server crashes every day. The server performance up until that moment is perfect. The directadmin log files show nothing out of the ordinary. Yesterday only the mysql server crashed but it also crashed the entire machine before. The memory usage in DA seems to be normal: directadmin directadmin (pid 3923 22158 22159 22160 22161 22162 )8.75 MB dovecot dovecot (pid 3851 ) 47.8 MB exim exim (pid 1350 ) 1.29 MB httpd (pid 21525 21528 21529 21530 21531 21532 21546 21571 21742 21743 21744 )490.4 MB mysqld mysqld (pid 1299 ) 287.8 MB named named (pid 3807 ) 16.3 MB proftpd proftpd (pid 1481 ) 1.91 MB sshd sshd (pid 1173 21494 ) 5.16 MB Restarting services immediately frees up memory, but slowly over time the memory usage increases(about 24 hours to crash). The commands: # sync # echo 3 > /proc/sys/vm/drop_caches Will free al memory correct. I could just create a cronjob but it seems the wrong way around to me. I can't seem to pinpoint the cause. Any advices, references or tips are highly appreciated! Greetings, Coen edit: free -m : after drop_caches: total used free shared buffers cached Mem: 3830 735 3095 0 0 21 -/+ buffers/cache: 712 3117 Swap: 991 0 991 I'll post another one this evening.

  Read the article

< Previous Page | 696 697 698 699 700 701 702 703 704 705 706 707  | Next Page >