Search Results

Search found 21350 results on 854 pages for 'url parsing'.

Page 705/854 | < Previous Page | 701 702 703 704 705 706 707 708 709 710 711 712  | Next Page >

• Transfer websites and domains to new server

  - by Albert

  We have currently around 40 websites and 80+ domains/sub-domains in a shared 1&1 hosting package, and we just acquired a managed dedicated server with 1&1 as well. Now it's time to start transferring everything over to the new server. Transferring just the websites and databases wouldn't be a problem, it would take time but it's pretty straight forward. The problem comes when transferring the domains, let me explain why. Many of the websites we have are accessible via sub-domains of a parent domain. Ideally, we would like to transfer the sites one by one, in order to check for each one that everything works fine in the new server. However, since we also need to transfer the domain so it's managed in the new server, once we do that means that all the websites using that domain need to be already in the new server before transferring that domain, thus not allowing the "one by one" philosophy. Another issue is the downtime when transferring the domain, from the moment it stops working in the hosting package and becomes active in the new server. I believe there's nothing we can do here. So my question is if there's any way we can do the "one by one" transferring of the websites (and their corresponding sub-domains) in the circumstances described above. One idea I had would be: 1. Let's say we have website A, which is accessible using subdomain.mydomain.com (and there are many other websites accessible via other sub-domains of mydomain.com) 2. Transfer the files of website A to the new server 3. Point a test domain in the new server to the website A's folder (the new server comes with a "test" domain) 4. Test if website A works with that "test" domain 5. In the old hosting, somehow point the real sub-domain (subdomain.mydomain.com) to the new location of website A, in a way that user always see the same URL as always 6. Repeat 2-5 for every website belonging to the same domain 7. Once all are working in the new server, do the actual transfer of the domain to the new server, and then re-create all the sub-domains and point them to their corresponding website That way, users wouldn't notice that there's been a change (except for a small down time of the websites when doing the domain transfer). The part I'm not sure about is point 5 of the above. Is there any way to do that? I mean do it in a way that users see the original domain all the time in their browser, even for internal pages (so not only for the "home page", which would be sub-domain.mydomain.com, but also for example for the contact page, which would be sub-domain.mydomain.com/contact.php). Is there any way to do this? Or are we SOL and we're going to have to transfer all at the same time?

  Read the article

• REMINDER: ATG Live Webcast Nov. 15: Best Practices for Using EBS SDK for Java with Oracle ADF

  - by Bill Sawyer

  Thursday, November 15th is your chance to join Sara Woodhull and Juan Camilo Ruiz as they discuss  Best Practices for Using EBS SDK for Java with Oracle ADF. You can find the complete event details at ATG Live Webcast: Best Practices for Using EBS SDK for Java with Oracle ADF Date:               Thursday, November 15, 2012Time:              8:00 AM - 9:00 AM Pacific Standard TimePresenters:   Sara Woodhull, Principal Product Manager, E-Business Suite ATG                         Juan Camilo Ruiz, Principal Product Manager, ADF Webcast Registration Link (Preregistration is optional but encouraged) To hear the audio feed:    Domestic Participant Dial-In Number:           877-697-8128    International Participant Dial-In Number:      706-634-9568    Additional International Dial-In Numbers Link:    Dial-In Passcode:                                              103192To see the presentation:    The Direct Access Web Conference details are:    Website URL: https://ouweb.webex.com    Meeting Number:  591862924 If you miss the webcast, or you have missed any webcast, don't worry -- we'll post links to the recording as soon as it's available from Oracle University.  You can monitor this blog for pointers to the replay. And, you can find our archive of our past webcasts and training here. If you have any questions or comments, feel free to email Bill Sawyer (Senior Manager, Applications Technology Curriculum) at BilldotSawyer-AT-Oracle-DOT-com.

  Read the article

• How to implement an email unsubscribe system for a site with many kinds of emails?

  - by Mike Liu

  I'm working on a website that features many different types of emails. Users have accounts, and when logged in they have access to a setting page that they can use to customize what types of emails they receive. However, I'd like to also give users an easy way to unsubscribe directly in the emails they receive. I've looked into list unsubscribe headers as well as creating some type of one click link that would unsubscribe a user from that type of email without requiring login or further action. The later would probably require me to break convention and make changes to the database in response to a GET on the link. However, am I incorrect in thinking that either of these would require me to generate and permanently store a unique identifier in my database for every email I ever send, really complicating email delivery? Without that, I'm not sure how I would be able to uniquely identify a user and a type of email in order to change their email preferences, and this identifier would need to be stored forever as a user could have an email sitting in their inbox for a long time before they decide to act on it. Alternatively, I was considering having a no-login page for managing email preferences. In contrast to above where I would need one of these identifiers for each email, this would only need one identifier per user, with no generation or other action required on sending an email. All of these raise security issues, and they could potentially be used by people to tamper with others' email preferences. This could be mitigated somewhat by ensuring that the identifier is really difficult to guess. For the once per user identifier approach, I was considering generating the identifier by passing a user's ID through some type of encryption algorithm, is this a sound approach? For the per-email identifiers, perhaps I could use a user's ID appended to the time. However, even this would not eliminate the problem entirely, as this would really just be security through obscurity, and anyone with the URL could tamper, and in the end the main defense would have to be that most people aren't so bored as to tamper with other people's email preferences. Are there any other alternatives I've missed, or issues or solutions with these that anyone can provide insight on? What are best practices in this area?

  Read the article

• ATG Live Webcast November 2nd: Using Oracle ADF with Oracle E-Business Suite

  - by Bill Sawyer

  After a break for Oracle Open World 2012, the ATG Live Webcast series is restarting this Friday, November 2nd, 2012 with the webcast: Using Oracle ADF with Oracle E-Business Suite: The Full Integration View Oracle E-Business Suite delivers functionality for handling the core business of your organization. This webcast provides an overview of how to use Oracle Application Development Framework (Oracle ADF) to deliver alternative user interfaces to existing Oracle E-Business Suite processes. The webcast also explores integration between the two worlds using the Oracle E-Business Suite SDK for Java. Date:               Friday, November 2, 2012Time:              8:00 AM - 9:00 PM (NOON) Pacific Standard TimePresenters:   Sara Woodhull, Principal Product Manager, E-Business Suite ATG                         Juan Camilo Ruiz, Principal Product Manager, ADF Webcast Registration Link (Preregistration is optional but encouraged) To hear the audio feed:    Domestic Participant Dial-In Number:           877-697-8128    International Participant Dial-In Number:      706-634-9568    Additional International Dial-In Numbers Link:    Dial-In Passcode:                                              103190To see the presentation:    The Direct Access Web Conference details are:    Website URL: https://ouweb.webex.com    Meeting Number:  590254265 If you miss the webcast, or you have missed any webcast, don't worry -- we'll post links to the recording as soon as it's available from Oracle University.  You can monitor this blog for pointers to the replay. And, you can find our archive of our past webcasts and training here. If you have any questions or comments, feel free to email Bill Sawyer (Senior Manager, Applications Technology Curriculum) at BilldotSawyer-AT-Oracle-DOT-com.

  Read the article

• Extensible Metadata in Oracle IRM 11g

  - by martin.abrahams

  Another significant change in Oracle IRM 11g is that we now use XML to create the tamperproof header for each sealed document. This article explains what this means, and what benefit it offers. So, every sealed file has a metadata header that contains information about the document - its classification, its format, the user who sealed it, the name and URL of the IRM Server, and much more. The IRM Desktop and other IRM applications use this information to formulate the request for rights, as well as to enhance the user experience by exposing some of the metadata in the user interface. For example, in Windows explorer you can see some metadata exposed as properties of a sealed file and in the mouse-over tooltip. The following image shows 10g and 11g metadata side by side. As you can see, the 11g metadata is written as XML as opposed to the simple delimited text format used in 10g. So why does this matter? The key benefit of using XML is that it creates the opportunity for sealing applications to use custom metadata. This in turn creates the opportunity for custom classification models to be defined and enforced. Out of the box, the solution uses the context classification model, in which two particular pieces of metadata form the basis of rights evaluation - the context name and the document's item code. But a custom sealing application could use some other model entirely, enabling rights decisions to be evaluated on some other basis. The integration with Oracle Beehive is a great example of this. When a user adds a document to a Beehive workspace, that document can be automatically sealed with metadata that represents the Beehive security model rather than the context model. As a consequence, IRM can enforce the Beehive security model precisely and all rights configuration can actually be managed through the Beehive UI rather than the IRM UI. In this scenario, IRM simply supports the Beehive application, seamlessly extending Beehive security to all copies of workspace documents without any additional administration. Finally, I mentioned that the metadata header is tamperproof. This is obviously to stop a rogue user modifying the metadata with a view to gaining unauthorised access - reclassifying a board document to a less sensitive classifcation, for example. To prevent this, the header is digitally signed and can only be manipulated by a suitably authorised sealing application.

  Read the article

• ATG Live Webcast March 21 Reminder: Network, WAN, and PC Performance Tuning (Performance Series Part 3 of 3)

  - by BillSawyer

  A quick reminder about tomorrow's webcast:  Andy Tremayne, Senior Architect, Applications Performance, and co-author of Oracle Applications Performance Tuning Handbook from Oracle Press, and Uday Moogala, Senior Principal Engineer, Applications Performance, will discuss network performance for E-Business Suite. Andy and Uday will cover tuning the client and tuning the network. They will share real-life examples of network performance, and show you tools and techniques that you can use to estimate or simulate performance on your own network.The agenda for the Performance Tuning - Part 3 of 3 webcast includes the following topics: Tuning the Client Tuning the Network Date:               Thursday, March 21, 2012Time:              8:00 AM - 9:00 AM Pacific Standard TimePresenters:  Andy Tremayne, Senior Architect, Applications Performance                        Uday Moogala, Senior Principal Engineer, Applications PerformanceWebcast Registration Link (Preregistration is optional but encouraged)To hear the audio feed:   Domestic Participant Dial-In Number:           877-697-8128    International Participant Dial-In Number:      706-634-9568    Additional International Dial-In Numbers Link:    Dial-In Passcode:                                              99341To see the presentation:    The Direct Access Web Conference details are:    Website URL: https://ouweb.webex.com    Meeting Number:  591264961If you miss the webcast, or you have missed any webcast, don't worry -- we'll post links to the recording as soon as it's available from Oracle University.  You can monitor this blog for pointers to the replay. And, you can find our archive of our past webcasts and training here.

  Read the article

• Collision detection when pathfinding with pathnodes, UDK

  - by Dave Voyles

  I'm trying to create a class that allows my AIController to path find using pathnodes (NOT NavMeshes). It's doing a swell job of going from point to point in a set order (although I would like for it to be a random patrol at some point), but it gets caught up on collision from time to time. I.E. He'll walk the same set path, and when he runs into the blocks in the middle of the map he continues to rub against them until they finish, and continues on his merry way to the next path node. How can I prevent this from happening, or at least have him move from the wall if he does a trace and detects that it is there? It looks like I need to use MoveToward() instead of MoveTo(), as MoveToward allows the pawn to adjust its course during movement. I'm just not sure of how to use those paramters. Mougli has a decent tutorial on it[/URL], but I can't seem to get it to work correctly with my pathnode array. class PathfindingAIController extends UDKBot; var array Waypoints; var int _PathNode; //declare it at the start so you can use it throughout the script var int CloseEnough; simulated function PostBeginPlay() { local PathNode Current; super.PostBeginPlay(); //add the pathnodes to the array foreach WorldInfo.AllActors(class'Pathnode',Current) { Waypoints.AddItem( Current ); } } simulated function Tick(float DeltaTime) { local int Distance; local Rotator DesiredRotation; super.Tick(DeltaTime); if (Pawn != None) { // Smoothly rotate the pawn towards the focal point DesiredRotation = Rotator(GetFocalPoint() - Pawn.Location); Pawn.FaceRotation(RLerp(Pawn.Rotation, DesiredRotation, 3.125f * DeltaTime, true), DeltaTime); } Distance = VSize2D(Pawn.Location - Waypoints[_PathNode].Location); if (Distance <= CloseEnough) { _PathNode++; } if (_PathNode >= Waypoints.Length) { _PathNode = 0; } GoToState('Pathfinding'); } auto state Pathfinding { Begin: if (Waypoints[_PathNode] != None) // make sure there is a pathnode to move to { MoveTo(Waypoints[_PathNode].Location); //move to it `log("STATE: Pathfinding"); } } DefaultProperties { CloseEnough=400 bIsplayer = True }

  Read the article

• PHP `virtual()` with Apache MultiViews not working after upgrade to 12.04

  - by Izzy

  I use PHP's virtual() directive quite a lot on one of my sites, including central elements. This worked fine for the last ~10 years -- but after upgrading to 12.04 it somehow got broken. Example setup (simplified) To make it easier to understand, I simplify some things (contents). So say I need a HTML fragment like <P>For further instructions, please look <A HREF='foobar'>here</P> in multiple pages. 10 years ago, I used SSI for that, so it is put into a file in a central place -- so if e.g. the targeted URL changes, I only need to update it in one place. To serve multiple languages, I have Apache's MultiViews enabled -- and at $DOCUMENT_ROOT/central/ there are the files: foobar.html (English variant, and the default) foobar.html.de (German variant). Now in the PHP code, I simply placed: <? virtual("/central/foobar"); ?> and let Apache take care to deliver the correct language variant. The problem As said, this worked fine for about 10 years: German visitors got the German variant, all others the English (depending on their preferred language). But after upgrading to Ubuntu 12.04, it no longer worked: Either nothing was delivered from the virtual() command, or (in connection with framesets) it even ended up in binary gibberish. Trying to figure out what happens, I played with a lot of things. I first thought MultiViews was (somehow) not available anymore -- but calling http://<server>/central/foobar showed the right variant, depending on the configured language preferences. This also proved there was nothing wrong with file permissions. The error.log gave no clues either (no error message thrown). Finally, just as a "last ressort", I changed the PHP command to <? virtual("central/foobar.html"); ?> -- and that very same file was in fact included. But the language dependend stuff obviously did no longer work. Of course I tried to find some change (most likely in PHP's virtual() command), using Google a lot, and also searching the questions here -- unfortunately to no avail. Finally: The question Putting "design questions" aside (surely today I would design things differently -- but at least currently I miss the time to change that for a quite huge amount of pages): What can be done to make it work again? I surely missed something -- but I cannot figure out what...

  Read the article

• Ajaxy

  - by Chris Skardon

  Today is the big day, the day I attempt to use Ajax in the app… I’ve never done this (well, tell a lie, I’ve done it in a ‘tutorial’ site, but that was a while ago now), so it’s going to be interesting.. OK, basics first, let’s start with the @Ajax.ActionLink Right, first stab: @Ajax.ActionLink("Click to get latest", "LatestEntry", new AjaxOptions { UpdateTargetId = "ajaxEntrant", InsertionMode = InsertionMode.Replace, HttpMethod = "GET" }) As far as I’m aware, I’m asking to get the ‘LatestEntry’ from the current controller, and in doing so, I will replace the #ajaxEntrant DOM bit with the result. So. I guess I’d better get the result working… To the controller! public PartialResult LatestEntry() { var entrant =_db.Entrants.OrderByDescending(e => e.Id).Single(); return PartialView("_Entrant", entrant); } Pretty simple, just returns the last entry in a PartialView… but! I have yet to make my partial view, so onto that! @model Webby.Entrant <div class="entrant"> <h4>@Model.Name</h4> </div> Again, super simple, (I’m really just testing at this point)… All the code is now there (as far as I know), so F5 and in… And once again, in the traditionally disappointing way of the norm, it doesn’t work, sure… it opens the right view, but it doesn’t replace the #ajaxEntry DOM element, rather it replaces the whole page… The source code (again, as far as I know) looks ok: <a data-ajax="true" data-ajax-method="GET" data-ajax-mode="replace" data-ajax-update="#ajaxEntrants" href="/Entrants/LatestEntrant">Click to get latest</a> Changing the InsertionMode to any of the other modes has the same effect.. It’s not the DOM name either, changing that has the same effect.. i.e. none. It’s not the partial view either, just making that a <p> has (again) no effect… Ahhhhh --- what a schoolboy error… I had neglected (ahem) to actually put the script bit into the calling page (another save from stackoverflow): <script src="@Url.Content("~/Scripts/jquery.unobtrusive-ajax.js")" type="text/javascript"></script> I’ve now stuck that into the _Layout.cshtml view temporarily to aid the development process… :) Onwards and upwards! Chris

  Read the article

• What changes were made to a document

  - by Daniel Moth

  Part of my job is writing functional specs. Due to the inevitable iterative and incremental nature of software design/development, these specs need to be updated with additions/deletions/changes over a period of time. When the time comes for a developer to implement features or update their design document (or a tester to test the feature or update their test specs) they need to be doing that against the latest spec. The problem is that if they have reviewed this document already, they need a quick way to find the delta from the last time they reviewed it to see what changes exist and how their existing plans may be affected (instead of having to read the entire document again). Doing that is very easy assuming your Word documents are hosted on SharePoint. 1. Every time you review a document note the SharePoint version and/or date (if it is a printed copy, make sure your printout includes the date in the footer – all my specs do) 2. When you need to see what changed, open the document (make sure you are not using a cached or local offline copy) and on the ribbon go to the "Review" tab and then  click on the "Compare" button. 3. Click on the "Specific Version…" option. In the dialog that pops up pick the last version you reviewed and click the "Compare" button. [TIP for authors: before checkin of your document, always compare against the "Last Version" on the SharePoint so you can add appropriate more complete check in comments] 4. What you see now is that in addition to the document you have open, two other documents just opened up. One is in the background (flashing on your task bar) – close that one as it is the old version. 5. The other document is in the foreground and contains all the changes between the old version and the latest one. Be sure not to make edits to this document, use it only for reading the changes. To find all the changes, on the ribbon under the "Review" tab, click on the "Reviewing Pane" to open the reviewing pane on the left. You can now click on each pink change to see what it is. 6. When you are done reviewing changes close the document and don't save any changes (remember if you want to make edits/additions/comments make them in the original document which is still open). And now I have a URL to point to people that keep asking about this – enjoy  :-) Comments about this post welcome at the original blog.

  Read the article

• Easy Profiling Point Insertion

  - by Geertjan

  One really excellent feature of NetBeans IDE is its Profiler. What's especially cool is that you can analyze code fragments, that is, you can right-click in a Java file and then choose Profiling | Insert Profiling Point. When you do that, you're able to analyze code fragments, i.e., from one statement to another statement, e.g., how long a particular piece of code takes to execute: https://netbeans.org/kb/docs/java/profiler-profilingpoints.html However, right-clicking a Java file and then going all the way down a longish list of menu items, to find "Profiling", and then "Insert Profiling Point" is a lot less easy than right-clicking in the sidebar (known as the glyphgutter) and then setting a profiling point in exactly the same way as a breakpoint: That's much easier and more intuitive and makes it far more likely that I'll use the Profiler at all. Once profiling points have been set then, as always, another menu item is added for managing the profiling point: To achieve this, I added the following to the "layer.xml" file: <folder name="Editors"> <folder name="AnnotationTypes"> <file name="profiler.xml" url="profiler.xml"/> <folder name="ProfilerActions"> <file name="org-netbeans-modules-profiler-ppoints-ui-InsertProfilingPointAction.shadow"> <attr name="originalFile" stringvalue="Actions/Profile/org-netbeans-modules-profiler-ppoints-ui-InsertProfilingPointAction.instance"/> <attr name="position" intvalue="300"/> </file> </folder> </folder> </folder> Notice that a "profiler.xml" file is referred to in the above, in the same location as where the "layer.xml" file is found. Here is the content: <!DOCTYPE type PUBLIC '-//NetBeans//DTD annotation type 1.1//EN' 'http://www.netbeans.org/dtds/annotation-type-1_1.dtd'> <type name='editor-profiler' description_key='HINT_PROFILER' localizing_bundle='org.netbeans.eppi.Bundle' visible='true' type='line' actions='ProfilerActions' severity='ok' browseable='false'/> Only disadvantage is that this registers the profiling point insertion in the glyphgutter for all file types. But that's true for the debugger too, i.e., there's no MIME type specific glyphgutter, instead, it is shared by all MIME types. Little bit confusing that the profiler point insertion can now, in theory, be set for all MIME types, but that's also true for the debugger, even though it doesn't apply to all MIME types. That probably explains why the profiling point insertion can only be done, officially, from the right-click popup menu of Java files, i.e., the developers wanted to avoid confusion and make it available to Java files only. However, I think that, since I'm already aware that I can't set the Java debugger in an HTML file, I'm also aware that the Java profiler can't be set that way as well. If you find this useful too, you can download and install the NBM from here: http://plugins.netbeans.org/plugin/55002

  Read the article

• My Website (ports) Have Been Hijacked!

  - by ChrisD

  This is one of the scary problems that turns out to have a pretty easy solution. I tried to view one of my websites hosted by IIS on my primary workstation and the site wouldn’t render.   I checked IIS Admin and the site was there, but I couldn’t access it on either port 443 or port 80. In reviewing the event log I found the following entry: The World Wide Web Publishing Service (WWW Service) did not register the URL prefix http://x.x.x.x:80/ for site 1. The site has been disabled. The data field contains the error number I disabled the IIS Service (issued Net Stop W3svc from an admin command prompt) and then scanned for anything listening on port 80. C:\Users\cdarrigo>netstat -ano |findstr 80   TCP    0.0.0.0:80             0.0.0.0:0              LISTENING       3124 This confirmed that something had hijacked my ports.  I had another process that was listening on port 80 and it was preventing IIS from serving up my site.   A quick phone call to a friend taught me that the last number shown above (3124) is the process id of the process that's listening on the port.  So whatever process had PID 3124 had to be stopped. I scanned my process list, and determined it was, much to my surprise, Skype.  I exited the Skype application and restarted the IIS service, then manually restarted the web site.  This time, browsing to my site resulted in successfully viewing my site. So why was Skype listening on those ports?  A quick Google search revealed the answer: “Skype listens on those ports to increase quality.” really? “you might become a supernode if those ports are open.” No thanks.  I’m not sure how accurate those statements are, but I want to disable this behavior in Skype none the less. Fortunately Skype provides a configuration option to turn off this behavior.   Launch Skype and log in.  From the Tools menu, select Options Select the Advanced options and then Connection Uncheck the box Use Port 80 and 443 as alternatives for incoming connections Back to development bliss.

  Read the article

• User connection management in Reporting Services configuration

  - by Testas

  IT professionals will use Reporting Services Configuration Manager to perform post installation tasks for SQL Server Reporting Services. Introduced in SQL Server 2005, Reporting Services Configuration Manager provides an intuitive interface to perform tasks including specifying the report server database, report manager url, and indeed one of the first post installation tasks that should be performed is backing up the encryption keys that are used to protect the sensitive information within the rdl files.  Many of the options that are selected within Reporting Services Configuration Manager are written to a number of configuration files including the rsreportserver.config file located in C:\Program Files\Microsoft SQL Server\Report Server InstanceName\Reporting Services\ReportServer folder.When opening this file you will notice that there are more configuration settings within the rsreportserver.config file than is available through the Reporting Services Configuration Manager Interface. As a result there are additional configuration options that can be defined within this file.  A customer was having a problem performing stress tests against a new Report Server that would be going live for an enterprise reporting system. One aspect of the stress test was to fire 50 connections from a single user account. When performing the stress test an error described that the maximum active request had been exceeded. Within the rsreportserver.config, there is a key that is added to the file:  <Add Key=”MaxActiveReqForOneUser” Value=”20”/>  Changing the value from 20 to 50 accommodated the needs of the stress test, however, a wider question should be asked pertaining to this setting when implementing Reporting Services to a production environment. Within an intranet environment, the default setting is appropriate when network bandwidth is high, users are known and demand for reports is particularly high from a group of users.  However, when deploying a Reporting Server solution to an extranet, or the internet, you may want to consider reducing this setting to reduce to scope of connections that can be acquired by a single user and placing unnecessary pressure on the report server. I do hope that Reporting Services Configuration Manager evolves to include an advanced page that includes an intuitive interface to change configuration settings such as the MaxActiveReqForOneUser, and also configure rendering and data extensions and define secure connection levels to the report server. All these options can be configured within the rsreportserver.config file, and these are setting that customers would like to see in Reporting Services Configuration Manager in the future.   If you think that the SQL community would benefit from this addition, you can vote on it at Microsoft Connect  https://connect.microsoft.com/SQLServer/feedback/details/565575/extending-reporting-services-configuration-manager-rscm    

  Read the article

• Launch 2010 Technical Readiness Unofficial Q&amp;A.

  - by mbcrump

  I had an email from one of my readers about the 2010 Technical Readiness Series. Please read below: Hi Michael, I noticed you blogged a while back that you were going to attend MS 2010 Launch event. I’m going to the session in Seattle on May 27, is it worth it to attend? Also, I’m wondering if they give any free software away like VS2010 Pro? Any decent vendors? Looking forward to hearing back from you. I decided this information would probably benefit several instead of just responding back to the reader. In case you are not aware, MS has a 2010 launch event showing VS2010, Office 2010, SharePoint 2010 and SQL Server 2008R2.  You can sign up for an event here: https://microsoft.crgevents.com/Register2010/Content/Event_Selection.aspx I’ve answered the questions asked below. Q: Is it worth going? A: It is if you have had little or no exposure to the latest 2010 products. Most people are familiar with VS2010, but have not seen SharePoint 2010 Office 2010 or Windows Phone 7. It is designed to get you up to speed very quickly. If you have watched most of the MIX videos and keep up with .NET in general, you will benefit more by having the ability to ask questions.    Q: Did you get any free software? A: No, only demos including: VS2010/Office 2010 – They give you a link to the url where you can download the trial version. Windows 7 Enterprise – You get a DVD with the trial version loaded. Q: Do they give away any cool swag? A: Just a Microsoft T-Shirt (XL). Q: What about the vendor selection? A: At the event that I went to, most vendors were pushing SharePoint products. There wasn’t a lot of variety in the selection. Most vendors were giving away the typical pens, buttons and stickers and trial software. If you have any other questions, feel free to contact me. I will answer and add to this un-official FAQ.

  Read the article

• Getting up and started with the Windows Phone Developer Tools 7.1 Beta 2

  - by mbcrump

  Windows Phone Developer Tools 7.1 Beta 2 was released on 6/29/2011. Are you ready for it? If not then let my guide help you get your system prepared and go through a few new features. Download links: Web Installer of Windows Phone 7.1 Beta 2 SDK ISO Image of Windows Phone 7.1 Beta 2 SDK - (723 MB) To get started you are going to need to remove the previous version of your Windows Phone Developer Tools 7.1 Beta 1.   This kicks off the process of uninstalling the Beta.   Once it is uninstalled then you are going to want to grab the bits from: http://www.microsoft.com/download/en/details.aspx?id=26648. The only thing your interested in here is the vm_web2.exe.   Make sure before you start that Zune is not running or you will get this error message like this one and have to restart from scratch. Now just go through your normal Install Screens. It should be installed and ready to go: A couple of things to note: 1) When creating a new phone application you now have several new templates to choose from as shown below. I welcome this addition because I’m a firm believer that we need more templates in order to get more people started. 2) Once you select an application template you can now pick which version of the Windows Phone platform that you wish to target: 3) If you created a WP7 7.1 Beta 1 project that it will still work properly in WP7 7.1 Beta 2. 4) You now have access to the search app icon. Once pressed then you will see something like this: 5) Under Settings –> Applications. You now have background tasks. 6) You will notice that the Web Browser looks a little different with the URL now located at the bottom of the screen and completely removing the “add”, “favorites” and “tabs” icon. Those icons are now moved to the menu bar.   That is it for my “Getting up and going with the Windows Phone Developer Tools 7.1 Beta 2”. I hope you enjoyed it and please feel free to subscribe to my feed or follow me on Twitter.   Subscribe to my feed

  Read the article

• facebook share and opengraph

  - by hannit cohen

  I'm managing a video blog. The blog contains a main youtube video on the homepage and several thumbnail images of other videos elsewhere. I have a share button for the main page and the single posts pages and have added opengraph to specify the used image. For some reason facebook ignores my opengraph image and uses othe images it finds in the page... the header looks like this: (for the homepage) <!-- Facebook Opengraph --> <meta property="fb:app_id" content="155967927783206" /> <meta property="og:url" content="http://mttv.co.il/2010/12/%d7%9e%d7%a4%d7%92%d7%a9-%d7%a1%d7%99%d7%99%d7%a2%d7%95%d7%aa-%d7%92%d7%a0%d7%a0%d7%95%d7%aa-%d7%9c%d7%93%d7%95%d7%a8%d7%aa%d7%99%d7%94%d7%9d-1959-2010-%d7%91%d7%9e%d7%a2%d7%9c%d7%95%d7%aa/"/> <meta property="og:title" content="???? ?????? ????? ???????? 1959-2010 ??????" /> <meta property="og:description" content="???? ????? ?? ?????? ????? ?????? ????????? ???? ?????? 1959 ??? 2010 ?????? ????? ??????? ???' ??? ??? ????? ???? ??????? ???????? ?????? ?&quot;? ???? ??? ?&quot;? ????? ?????? ????? ???? 08.12.10 " /> <meta property="og:type" content="article" /> <meta property="og:image" content="http://www.mttv.co.il/wp-content/uploads/2010/12/Gvi91UEjCAw_mid-135x77.jpg" /> The website address is: http://mttv.co.il Any help will be appreciated

  Read the article

• SharePoint Navigation - Setting the Audience Property of an SPNavigationNode

  - by jhallal

  In this tip/trick i will demonstrate a way of setting by code the target audience of an SP navigation node.You might say setting this property in SharePoint UI is quite simple, but if you want to set it by code you will not find any straight forward property or method out of the box in SharePoint Object Model that does the job. The SPNavigationNode class has a property called “Properties”, which allows us to add custom properties to the node. One of the Property is “Audience”, which is used for setting the target audience on the navigation node. using (SPSite site = new SPSite("URL of your SharePoint Site")) {                using (SPWeb web = site.OpenWeb())         {             SPNavigationNode navNode = web.Navigation.GlobalNodes[0];              if (navNode.Properties.Contains("Audience"))             {                 navNode.Properties["Audience"] = "Users or Groups";             }             else             {                 navNode.Properties.Add("Audience", "Users or Groups");             }             navNode.Update();         } }

  Read the article

• Connect Team Foundation Service/TFS 2012 with Visual Studio 2010 &amp; Visual Studio 2008

  - by Vishal

  Hello, Microsoft finally released the Team Foundation Service in late October 2012 after its long time in the preview phase. I was already using the TFS Preview which was free but I was happy to see Microsoft releasing the Team Foundation Service also FREE for upto 5 users. Isn't that great news? I know there are bunch of other free source control repositories (Github, Bitbucket, SVN etc.) out there but I somehow like TFS better. Also the other good thing about the final release was that I didn’t had to do any kind of migration of my code from preview to final release version. Just changed the TFS connection URL and it worked like a charm. Anyways, if you are a startup with small team and need some awesome Source Control along with all the good Project Management, Continuous Integration (Build, Test, Deploy), Team Collaboration, Agile/Scrum planning etc. features than Team Foundation Service is your answer. Microsoft has not yet released their pricing for more than 5 users and will be releasing it sometime in early 2013. What if as of now you have a team more than 5 users and you want to use Team Foundation Service, the good news is you can use it for FREE but when they release the final pricing, you will have to transition to the paid plan. Lot of story, getting to the point, connecting to Team Foundation Service with Visual Studio 2012 is straight forward and would work out of the box but it wont for previous versions of Visual Studio. You will have to upgrade to the latest service pack first and than install the forward compatibility pack. (1st : Service Packs & 2nd: Forward Compatibility packs) For Visual Studio 2010: Visual Studio 2010 Service Pack 1. Visual Studio 2010 forward compatibility for TFS 2012 and Team Foundation Service.         For Visual Studio 2008: Visual Studio 2008 Service Pack 1. Visual Studio 2008 forward compatibility for TFS 2012 & Team Foundation Service. Restart your system. Visual Studio 2008 will not work if you only put https://xxx.visualstudio.com. You will have to put your collection name too as shown below.       By the way, it doesn’t matter if you are an Apple Application Developer or Android App Developer, you can still use Team Foundation Service as your source control. Below are few links to connect to Team Foundation Service with other IDEs: Connect Eclipse to Team Foundation Service. Connect XCode to Team Foundation Service. Happy coding. Vishal Mody

  Read the article

• Microsoft Virtual Academy

  Carpe Diem It's been since a while that I could write an article for this blog but alas, I was (and still am) very busy with customer's work. Which is actually good. So, what is this article going to tell you? Well, in general, just what I already tweeted, that life is constant process of learning - especially as software craftsman. Due to an upcoming new customer project in ASP.NET I had to seize the opportunity to get my head deeper into latest available technologies, like Windows Azure and SQL Azure. I know... cloud computing and so on is not a recent development and already available since quite a while but I never any means to get myself into this since roughly two weeks ago. Microsoft Virtual Academy I can't remember exactly what guided me towards the Microsoft Virtual Academy (MVA), oh wait... Yes, it was a posting on Facebook from an old CLIP community friend. He posted a shortened URL with #MVA tag that caught my attention. Thanks for that Thomas Kuberek. After the usual sign in or registration via Live ID I was a little bit surprised that Mauritius is not an available country option... Quick mail exchange with the MVA Decan, and yeah, apologies for the missing entry. So, currently I'm learning about Microsoft products and services, and collecting points under "Not Listed Country" until Mauritius is going to be added. Hopefully soon, as MVA honors your effort with different knowledge ranks that are compared to other students with public profiles. I think it's a nice move to add some game and competition factor into the learning game. The tracks and their different modules are mainly references to publicly available material online, namely on either MSDN, TechNet, Channel9, or other Microsoft based sites. The course material therefore also varies in different media and formats, ranging from simple online articles over downloadable documents (.docx or .pdf) to Silverlight / Windows Media streams with download options. Self-assessment and students ranking Each module in a track can be finished by taking part in a self-assessment. Up to now, the assessment I did (and passed) were limited to 10 minutes available time, and consisted of six to seven questions on the module training material. Nothing too serious but it gives you a glimpse idea how Microsoft certification exams are structured. Conclusion Nothing really new but nicely gathered, assembled and presented to the MVA students. At the moment, I wouldn't dare to compare the richness and quality of those courses with professional training offers, like Pluralsight .NET Training, LearnDevNow, VTC, etc. at all, but I think that MVA has potential. Give it a try, and let me know about your opinions.

  Read the article

• Diagram to show code responsibility

  - by Mike Samuel

  Does anyone know how to visually diagram the ways in which the flow of control in code passes between code produced by different groups and how that affects the amount of code that needs to be carefully written/reviewed/tested for system properties to hold? What I am trying to help people visualize are arguments of the form: For property P to hold, nd developers have to write application code, Ca, without certain kinds of errors, and nm maintainers have to make sure that the code continues to not have these kinds of errors over the project lifetime. We could reduce the error rate by educating nd developers and nm maintainers. For us to be confident that the property holds, ns specialists still need to test or check |Ca| lines of code and continue to test/check the changes by nm maintainers. Alternatively, we could be confident that P holds if all code paths that could violate P went through tool code, Ct, written by our specialists. In our case, test suites alone cannot give confidence that P holdsnd » nsnm ns|Ca| » |Ct| so writing and maintaining Ct is economical, frees up our developers to worry about other things, and reduces the ongoing education commitment by our specialists. or those conditions do not hold, so focusing on education and testing is preferable. Example 1 As a concrete example, suppose we want to ensure that our web-service only produces valid JSON output. Our web-service provides several query and mutation operators that can be composed in interesting ways. We could try to educate everyone who maintains those operations about the JSON syntax, the importance of conformance, and libraries available so that when they write to an output buffer, every possible sequence of appends results in syntactically valid JSON. Alternatively, we don't expose an output stream handle to application code, and instead expose a JSON sink so that every code path that writes a response is channeled through a JSON sink that is written and maintained by a specialist who knows JSON syntax and can use well-written libraries to produce only valid output. Example 2 We need to make sure that a service that receives a URL from an untrusted source and tries to fetch its content does not end up revealing sensitive files from the file-system, like file:///etc/passwd. If there is a single standard way that any developer familiar with the application language's libraries would use to fetch URLs, which has file-system access turned off by default, then simply educating developers about the standard mechanism, and testing that file probing fails for some inputs, will probably be sufficient.

  Read the article

• consume a .net webservice using jQuery

  - by Babunareshnarra

  Implementation shows the way to consume web service using jQuery. The client side AJAX with HTTP POST request is significant when it comes to loading speed and responsiveness.Following is the service created that return's string in JSON.[WebMethod][ScriptMethod(ResponseFormat = ResponseFormat.Json)]public string getData(string marks){    DataTable dt = retrieveDataTable("table", @"              SELECT * FROM TABLE WHERE MARKS='"+ marks.ToString() +"' ");    List<object> RowList = new List<object>();    foreach (DataRow dr in dt.Rows)    {        Dictionary<object, object> ColList = new Dictionary<object, object>();        foreach (DataColumn dc in dt.Columns)        {            ColList.Add(dc.ColumnName,            (string.Empty == dr[dc].ToString()) ? null : dr[dc]);        }        RowList.Add(ColList);    }    JavaScriptSerializer js = new JavaScriptSerializer();    string JSON = js.Serialize(RowList);    return JSON;}Consuming the webservice $.ajax({    type: "POST",    data: '{ "marks": "' + val + '"}', // This is required if we are using parameters    contentType: "application/json",    dataType: "json",    url: "/dataservice.asmx/getData",    success: function(response) {               RES = JSON.parse(response.d);        var obj = JSON.stringify(RES);     }     error: function (msg) {                    alert('failure');     }});Remember to reference jQuery library on the page.

  Read the article

• Unauthorized response from Server with API upload

  - by Ethan Shafer

  I'm writing a library in C# to help me develop a Windows application. The library uses the Ubuntu One API. I am able to authenticate and can even make requests to get the Quota (access to Account Admin API) and Volumes (so I know I have access to the Files API at least) Here's what I have as my Upload code: public static void UploadFile(string filename, string filepath) { FileStream file = File.OpenRead(filepath); byte[] bytes = new byte[file.Length]; file.Read(bytes, 0, (int)file.Length); RestClient client = UbuntuOneClients.FilesClient(); RestRequest request = UbuntuOneRequests.BaseRequest(Method.PUT); request.Resource = "/content/~/Ubuntu One/" + filename; request.AddHeader("Content-Length", bytes.Length.ToString()); request.AddParameter("body", bytes, ParameterType.RequestBody); client.ExecuteAsync(request, webResponse => UploadComplete(webResponse)); } Every time I send the request I get an "Unauthorized" response from the server. For now the "/content/~/Ubuntu One/" is hardcoded, but I checked and it is the location of my root volume. Is there anything that I'm missing? UbuntuOneClients.FilesClient() starts the url with "https://files.one.ubuntu.com" UbuntuOneRequests.BaseRequest(Method.{}) is the same requests that I use to send my Quota and Volumes requests, basically just provides all of the parameters needed to authenticate. EDIT:: Here's the BaseRequest() method: public static RestRequest BaseRequest(Method method) { RestRequest request = new RestRequest(method); request.OnBeforeDeserialization = resp => { resp.ContentType = "application/json"; }; request.AddParameter("realm", ""); request.AddParameter("oauth_version", "1.0"); request.AddParameter("oauth_nonce", Guid.NewGuid().ToString()); request.AddParameter("oauth_timestamp", DateTime.Now.ToString()); request.AddParameter("oauth_consumer_key", UbuntuOneRefreshInfo.UbuntuOneInfo.ConsumerKey); request.AddParameter("oauth_token", UbuntuOneRefreshInfo.UbuntuOneInfo.Token); request.AddParameter("oauth_signature_method", "PLAINTEXT"); request.AddParameter("oauth_signature", UbuntuOneRefreshInfo.UbuntuOneInfo.Signature); //request.AddParameter("method", method.ToString()); return request; } and the FilesClient() method: public static RestClient FilesClient() { return (new RestClient("https://files.one.ubuntu.com")); }

  Read the article

• Upgarde from Asp.Net MVC 1 to MVC 2 - how to and issues with JsonRequestBehavior

  - by Renso

  Goal Upgrade your MVC 1 app to MVC 2 Issues You may get errors about your Json data being returned via a GET request violating security principles - we also address this here. This post is not intended to delve into why the Json GET request is or may be an issue, just how to resolve it as part of upgrading from MVC1 to 2. Solution First remove all references from your projects to the MVC 1 dll and replace it with the MVC 2 dll. Now update your web.config file in your web app root folder by simply changing references to assembly="System.Web.Mvc, Version 1.0.0.0 to Version 2.0.0.0, there are a couple of references in your config file, here are probably most of them you may have:         <compilation debug="true" defaultLanguage="c#">             <assemblies>                        <add assembly="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />             </assemblies>         </compilation>           <pages masterPageFile="~/Views/Masters/CRMTemplate.master" pageParserFilterType="System.Web.Mvc.ViewTypeParserFilter, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" pageBaseType="System.Web.Mvc.ViewPage, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" userControlBaseType="System.Web.Mvc.ViewUserControl, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validateRequest="False">             <controls>                 <add assembly="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" namespace="System.Web.Mvc" tagPrefix="mvc" />   Secondly, if you return Json objects from an ajax call via the GET method you ahve several options to fix this depending on your situation: 1. The simplest, as in my case I did this for an internal web app, you may simply do:             return Json(myObject, JsonRequestBehavior.AllowGet);   2. In Mvc if you have a controller base you could wrap the Json method with:         public new JsonResult Json(object data)         {             return Json(data, "application/json", JsonRequestBehavior.AllowGet);                    }   3. The most work would be to decorate your Actions with:         [AcceptVerbs(HttpVerbs.Get)]   4. Another tnat is also a lot of work that needs to be done to every ajax call returning Json is:                             msg = $.ajax({ url: $('#ajaxGetSampleUrl').val(), dataType: 'json', type: 'POST', async: false, data: { name: theClass }, success: function(data, result) { if (!result) alert('Failure to retrieve the Sample Data.'); } }).responseText;   This should cover all the issues you may run into when upgrading. Let me kow if you run into any other ones.

  Read the article

• SOA Community Newsletter September 2012

  - by JuergenKress

  Dear SOA partner community member Are you ready for Oracle Open World 2012? If you are planning to attend, make sure that you prepare your trip to San Francisco. If you could not make it, watch the keynotes live on-demand. You can also plan and decide to visit the SOA, Cloud and Service Technology Symposium 2012 and meet Tim Hall and Demed Lher from our product management team in London. As an Oracle partner you will get 50% discount on the conference pass, please use the code DJMXZ370 and avail your discount. The BPM Solution Catalogue is now live, make sure you use the process examples and contribute your processes. SOA Proactive support is the best resource to support your SOA implementations. To administrate your SOA systems Enterprise Manager Cloud Control 12c is the best tool, you can now attend thefree on-demand training. EM12c, Real User Experience Insight 12R1 gives you all the details, checkout our new demo. The BPM11g demo for Oracle E-Business Suite has become available. A wonderful SOA demo case is the Fusion Order Demo, Antony Reynolds posted an article how to update it on SOA Suite PS5. If you do use Coherence e.g. for SOA Suite, checkout the extension from our partner CloudTran. In this edition to this you will also find articles from: Automatically Disable Proxy Service to avoid overloading OSB By Jian Liang & Storing SCA Metadata in the Oracle Metadata Services Repository by Nicolás Fonnegra Martinez and Markus Lohn & Exploring MDS Explorer by Mark Nelson & Using Cloud OER to Find Fusion Applications On-Premise Service Concrete WSDL URL by Rajesh Raheja & Oracle Service Bus duplicate message check using Coherence by Jan van Zoggel & Installing Oracle SOA Suite10g on Oracle Enterprise Linux Lonneke Dikmans & Generating an EJB SDO Service Interface for Oracle SOA Suite by Edwin Biemond. Jürgen Kress Oracle SOA & BPM Partner Adoption EMEA To read the newsletter please visit http://tinyurl.com/soanewsSeptember2012 (OPN Account required) To become a member of the SOA Partner Community please register at http://www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA Community newsletter,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

  Read the article

• How to host a site in another site - with little or no coding

  - by tunmise fasipe

  SUMMARY: All of these happens on Site A User visits site A User enter username and password User click on Login Button User authenticated on Site B behind the scene User is shown a page on Site A that contains his/her profile from Site B as layout/styled from Site B User can click links in the Profile page that links to other area in Site B Meaning: Session has to be maintained somehow I have web application where I store users' password and username. If you logon to this site, you can login with the password and username to have access to your profile. There is another option that requires you to login to my site from your site and have your profile displayed within your site. This is because you might already have a site that your clients know you with. This link is close to what I want to do: http://aspmessageboard.com/showthread.php?t=235069 A user on Site A login to Site B and have the information on site B showing in site A. He should not know whether Site B exists. It should be as if everything is happening in Site A This latter part is what I don't know to implement. I have these ideas: Have a fixed IFrame within your site to contain my site: but I am concerned about size/layout since different clients have different layout/size for their content section. I am thinking of how to maintain session too A webservice: I don't know how feasible this is since the Password and ID are on my server. You may have to send them back and forth. It means client would have to code with my API. But I am not just returning data, I have to show them a page that contains the profile details OpenID, Single-SignOn: Just guessing - but the authentication and data resides on my server. there is nothing to access on your side in this case Examples: like login into facebook within my site and still be able to do post updates, receive notifications Facebook implement some of these with IFrame e.g. the Like button *NOTE: * I have tested the IFrame option. It worked but I still have to remove my site specific content like my page Banner, Side Navigation etc. I was able to login normally as if I was actually on the site. This show my GUI but - style sheet was missing - content not styled with CSS - Any relative url won't work. It would look for that resource relative to the current server. Unless I change links to absolute - Clicking on the LogIn button produces this error: The state information is invalid for this page and might be corrupted. UPDATE: I was reading about REST webservice few days ago and I got this idea: What about the idea of returning an XML from a webservice [REST or SOAP] and providing an XSLT (that I can provide) to display it. Thus they won't have to do much coding?

  Read the article

< Previous Page | 701 702 703 704 705 706 707 708 709 710 711 712  | Next Page >