Search Results

Search found 2597 results on 104 pages for 'dell 2950'.

Page 71/104 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

• Mini DisplayPort to DVI-D Dual Link up to 2560 * 1600

  - by Steinway Wu

  I have a ThinkPad T530 with Mini DP++ and NVS 5400M, which are said to support 2560 * 1600 resolution. The display is Dell 3007WFP, which also supports 2560 * 1600. But, I have never seen any cables or adapters that can connect them with full support to 2560 * 1600. Do you have any idea? THANK YOU! In addition, I found that mDP++ means I can use a passive adapter. No need for active adapter which is much more expensive. This is the only one that meets my needs, but it is not sold in the US. And this one seems to be OK, but I am not sure because it says "2.5 Gbps per channel", which may not be enough.

  Read the article

• Linux driver for Intel ICH10R

  - by Pablo Santa Cruz

  Hi! I would like to know what 64-bit Linux distribution can I use with an Intel ICH10R RAID. I have tried CentOS 5.2 and Ubuntu Server 8.04. Neither support that raid controller. Also, I would like to know where do I setup the RAID-5 I want to use. I am using a TYAN S7002 motherboard and the BIOS software does not include an option to configure the RAID as I am used to do with Dell servers... Thanks a lot in advance.

  Read the article

• What influences the kind of RAM a desktop or laptop can support?

  - by Albert Iordache

  What exactly influences the kind of RAM a desktop or laptop can support? Apart from the clock speed, the maximum amount of RAM the motherboard can handle, the DDR type (1/2/3) and the shape of the module (DIMM for desktops, SO-DIMM for laptops)? I see that in certain cases, such as with the Kingston 4GB DDR3 1333MHz CL9, (and on the Kingston KTD-L3B/4G page) the page displays a set of laptop product numbers. Does the actual model of the laptop also influence the models of RAM it can support? Could, for instance, an Asus K52 work with that particular RAM module, even if it specifies Dell models?

  Read the article

• No sound (USB speakers) in Ubuntu 9.04 Jaunty Jackalope

  - by Mike

  I just installed Ubuntu 9.04 and have been unable to get sound functioning. I have a set of USB speakers (not USB powered with a stereo plug... they are totally USB). I've tried plugging them directly into the tower as well as into the USB port on my Dell 2405FPW monitor. Both USB ports are functioning correctly (I tested by sticking a flash drive in there - they both read it), and the speakers are functioning correctly in Windows. If it's relevant, I have an SB Audigy 2 sound card that came with the computer, but is not being used. Any ideas? Thanks! EDIT: These are the speakers - Logitech S-150 USB Speakers

  Read the article

• Windows 7 Easy Transfer does not start (Windows XP)

  - by Gerhard Weiss

  Windows 7 Easy Transfer does not start on my Windows XP system. I installed Windows 7 Easy Transfer and when I click to start it nothing happens. Not even an error message. I uninstalled and reinstalled a few times with the same results. I even tried starting it from C:\Program Files\Windows Easy Transfer 7\migwiz.exe with the same results. Nothing happens! Any one else run into this issue? Any suggestions on how to start it up differently? This is my work system so I do not know if they have it locked down. This is a Windows XP, Dell OptiPlex755 built about 3 years ago. I downloaded the 32-bit from this website: http://windows.microsoft.com/en-us/windows7/products/features/windows-easy-transfer and yes my system is 32-bit ;)

  Read the article

• New installation - Win 7 or directly Win 8?

  - by Horst Walter

  My laptop's hard disk is gone, so I need to re-install my Windows. Would it be a good idea to directly install Win8 (so actually the preview). Is there any known incompatibility with Win7 which would be a show stopper? I have a Dell XPS laptop, I do not expect any driver issues since the series is pretty much mainstream. Would the Win8 preview become Win8 RTM automatically by updates, or would I need to re-install Win8 RTM. This would be the no-go for me. The Win8 preview does not require a key, so I guess it becomes Win 8 RTM and then needs to be activated (which is what I want). Basically the idea is, I have to install windows anyway, so why not using the latest version?

  Read the article

• How do I reset the time on my computer, without turning it on?

  - by chipperyman573

  Alright, so today, I did something very stupid: Do an experement on my computer without backing it up. So I saw that the calander in windows could only go up to 12/31/2999 (or something like that). I was wondering if I set the time to 11:59:59 PM, if it would crash my computer, thinking that if I did I could just restart it from the recovery disc or something. Well, I was right: It did crash it. However, I can't turn my computer on AT ALL. When I try to, it plays a 1-2 second beep, 1 second silence, repeated a total of 3 times. My manufacturer is Dell. I'm sending this from my phone, I appolgise for all typos. My last backup was from a few months ago, that won't work.

  Read the article

• How to get AMD Catalyst working on Arch x86_64

  - by gh403

  I've got a Dell Inspiron 15R 7520 with AMD's hybrid "PowerXpress" graphics. The integrated graphics card is (if I understand it correctly) integrated with the i7-3612QM processor, and the discrete graphics card is a "Southern Islands" Radeon HD 7730M. The integrated graphics work perfectly under Arch. However, the discrete graphics don't. I have tried several different methods, and the one that seems to get me the farthest with the least effort is the AUR package catalyst-total-pxp. After installing, rebooting, and issuing the commands # aticonfig --initial # pxp_switch_catalyst amd # X X completely fails to start. The X log can be found here. I don't understand what is failing; potentially, it has something to do with the way my card is hooked up--I think it's muxless, but I really don't know. What is the matter here? Any help would be appreciated.

  Read the article

• AutoCAD 11 and network file shares

  - by gravyface

  Small network of perhaps half a dozen engineers, currently working on local copies of AutoCAD project files, which are then copied back up to file server (2008 Standard, 1-2 year old Dell server hardware, RAID 5 SAS disks (10k? not positive)) at end of day. To me, this sounds horribly inefficient and error-prone, however, I've been told that "AutoCAD and network files = bad idea" and this is gospel. The network is currently 10/100 (perhaps this is the reason for the "gospel") but all the workstations are within 2 years old and have GbE NICs so an upgrade of the core switch is long overdue. However, I know certain applications don't like network access, at all, and any sign of latency or disruption brings the whole thing crashing down. Anyone care to chime in?

  Read the article

• no display on tv when connecting pc via hdmi in win7

  - by Kane

  The system of pc is win7 32bit, the video card is ATI 4670. The tv is philips 74xx series. And the monitor is Dell 19' that connect with pc via VGA. The tv can receive the singal and show the pictures when booting the pc(bios self checking, the logo of windows 7), however the tv says there is no signal after the win7 login window shows. I have installed the latest CCC and driver of ATI video card. Does anyone have idea for it?

  Read the article

• PowerConnect 2848 , vlan configuration with AP

  - by Francesco

  I need to configure two vlan on an AP connected with a Dell PowerConnect 2848. The first one is up and running (let's say vlan x) , the second one is a completely different network (vlan y) , provided by a Gateway-DHCP wich i have no access, directely Patched (via patch panel) at a secondo AP device. So i cannot just plug this Gateway device on my switch without tagging traffic before, for DHCP collion . I have to solve this problem. I was thinking about tagging the traffic at the port wich I will connect the gateway device with vlan y and then set as trunk (vlanx+y) the AP port. In this way I hope to limit the vlan y traffic ONLY for the ports I selected avoiding the spread of unwanted dhcp calls. But all other ports are Unassigned , so I am not sure they won't forward dhcp (vlan y) traffic. I cannot change the Unassigned state for the vlan x ports cause vlanx is native.

  Read the article

• ZFS SAS/SATA controller recommendations

  - by ewwhite

  I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS, but it impacts hotswap capabilities (thus requiring a reboot upon disk failure/replacement). I'm curious as to what SAS/SATA controllers are recommended for home-brewed ZFS storage solutions. In addition, what effect does battery-backed write cache (BBWC) have in ZFS storage?

  Read the article

• Setting up a Windows Server 2008 R2 DC + Fileserver : native or virtual?

  - by user126890

  I want to deploy a new DC + Fileserver using Windows Server 2008 R2 SP1 Standard Edition on a Dell PowerEdge R410 and iSCSI storage for a small business (~30 people). Should I install the system native on the server or use a virt layer? I don't have a budget for virtualization so i gotta go with something free... What's a better working routine, taking snapshots of vm's or taking backups (Acronis/CloneZilla) of systems? If I use a virt system, I need a GUI for some people in the business to reset the system to a earlier state in emergency situations. I wanted to install phpVirtualBox once but never finished, is it suitable in a productive environment? server specs: Intel Xeon E5620 CPU (2,40GHz, 4C, 12MB Cache) 8GB RAM Dual Rank LV RDIMMs 1333MHz 2x 1TB SATA 7,2K 3,5, RAID1

  Read the article

• Laptop Akku defekt? [closed]

  - by venturebeats

  Ich habe ein großes Problem und zwar startet mein Laptop akku: akku Dell Inspiron 9400 Gut, dann machte ich ihn aber sofort "aus", ich klappte ihn eben zu, was heißt Energie sparen, er ist nicht heruntergefahren! Eine halbe Stunde später wollte mein Vater noch ran, er war dann auch ca. 5min und dann fuhr der Laptop wie gewöhnlich, wwenn er kein Akku mehr hat, heerunter. Dann wollten wir den Laptop wieder aufladen, doch es brannte nicht einmal die rote LED, was soviel heißt wie der Akku wird geladen. Und der Laptop (übrigens erst 7 Monate alt) kann man nicht startet! Nun meine Frage, hat das was mit dem Aufladekabel zu tun( dort brennt immer noch die grüne Lampe, was soviel heißt, wie dass aufjedenfall von der Seckdose Strom kommt) oder ist etwas am Laptop, bzw. ist er kaputt?

  Read the article

• What Hypervisors support non-homogenous clusters?

  - by edude05

  I've been using Citrx Xenserver for awhile on a few machines that don't support Hardware Virtualization as a test for various small servers. I recently have been experimenting with moving the PV Vms between machines but Xenserver gives me errors that roughly say I need to have homogenous hardware for this to work. Because of this I haven't been able to setup XenMotion or any of the nice features that come with server pooling in Xenserver. I'm considering moving away from XenServer, however I can't seem to find a Hypervisor that explicitly supports non-homogenous clusters. On a side note, we do have a few idenitally configured Dell 1950s that haven't had any VM solution setup on yet, so if we can find a solution that can allow us to move PVs to those as well that would be great. Non free solutions are OK as well. What hypervisor will allow this? Thanks!

  Read the article

• How do I recover from a Linux CentOS 4.6 Operating System Crash

  - by Greg Omebije

  Our x86 Linux server running CentOS4.6 has crashed. The machine boots only to the Grub prompt. We have tried using the "rescue mode" to recover the System, but it hasn't worked. How can we fix this problem, so that the machine boots normally? How can we fix this problem to the point were we can recover our files from the server Our Linux Server Configuration: Dell PowerEdge 1950 Intel Xeon 2 HDD (146GB each) 4GB RAM Hardware and Software raid setup CentOS 4.6 We used Sysrecord to boot the computer: the following are the output of fdisk -l Disk /dev/sda: 293.3 GB, 292326211584 255 heads, 63 sectors/track, 35539 Cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000080 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 17769 142625070 8e Linux LVM

  Read the article

• What happens when more RAM is installed than the motherboard supports?

  - by DanDan

  I have a free RAM slot and some spare memory that will fit my computer. However the problem is my motherboard only supports 2GB and I have 2GB installed. What would happen if I plugged the spare memory in the RAM slot? The following things spring to mind: Nothing will happen It will work, computer becomes faster Computer becomes slower Explosion Undetermined (Any of the above) Does anyone have any experience of this? Update: Egged on by you zealous lot, I went ahead and stuck the extra memory in. It booted up! Unfortunately, the hunch of some has been proved correct. The memory is reported at the capped limit, rather then the actual available. A shame then! But thank you all for your suggestions, speculations and stories. For your reference, I am using a Dell Insprion 6000 with 2gb installed, latest drivers. I attempted to add 512mb, with no success.

  Read the article

• Best Practice: iDRAC & NIC Selection

  - by Josh Brower

  I am setting up a new Dell server with iDRAC 6 Express. My options for the NIC are: 1) Shared 2) Shared with failover to LOM2 3) Shared with failover to all LOMs The server has 2x dual-nic PCI-E cards (total of 4 nics) My questions are thusly: -What is best practice for setting this up? Is there any reason why I would not want option 3? -If the NIC is being used for both iDRAC and the OS, (there is no dedicated iDRAC nic), does this ever cause any kinds of issues for either iDRAC or the OS? Thanks- -Josh

  Read the article

• Adobe Volume License for Indesign Digital Download Location?

  - by elistp

  We recently purchased a volume license for Adobe Indesign from Dell. We received an e-mail for the order that contains the serial #. However, there is no information on how to obtain Adobe Indesign from the Adobe licensing portal. This is our first time dealing with Adobe volume licensing so I'm a bit lost as to what we're suppose to do. I've googled around a little and found an Adobe License Portal but I do not have access to it. Does anyone with experience concerning Adobe volume licensing have any idea what we're suppose to do to get a download of our purchase?

  Read the article

• What causes random clicking/navigation sound while PC is idle?

  - by Jim Linny

  On my Dell D630 laptop running Windows XP Pro SP3, I randomly hear the "Windows Navigation Start.wav" played. This happens even if the only application active on the PC at the time is Microsoft Outlook and no one is touching the keyboard or touchpad. The start navigation sound IS enabled for Internet Explorer (I have IE 7 installed), but it is not running (no window open, anyway). The clicks are rapid, as if being executed automatically by a script or process, and they always come in threes: "click-click, click". I don't see any changes on the display and I don't know how to figure out what's running that could cause this. I have tried to leave Windows Task Manager open in the hope that I'll see a process name jump to the top of the list briefly, but it doesn't happen that often and I guess I'm not quick enough. The PC is slower than I think it should be, but System Idle Process is at 96 - 99 during the event, and for most of the time when I'm not actually using the machine. Any ideas?

  Read the article

• Expanding Files 0%, error 0x80070017 Windows 7 x64 RTM

  - by Liam

  I have downloaded Windows 7 x64 from MSDN. I have checked the hash of the file and it is correct. I have them made a bootble USB stick (http://kmwoley.com/blog/?p=345 (had to use my vista bootsect.exe as running 32bit at the moment). When I boot from the USB it fails when expanding the file. It stays on 0% and fails after around 90 seconds. The error is 0x80070017. As the hash is correct and I am using USB I guess it could be a hardware problems. Any advice how to get Windows 7 installed? The machine is a Dell Studio Slim.

  Read the article

• Does servers to >$1000 really have a memory limit of 4GB?

  - by Sandra

  Hi, I am looking for a server, and when I look at the specs some of the servers can only handle 4GB. Other can handle 8GB or 16GB, and others 64GB. Can that really be true? Is this really a hardware limitation, or are they disabling it in the BIOS, so there is no way to use 16GB on a 4GB supported server? An example is the Dell PowerEdge SC 440. Only 4GB supported, they say. Would Linux allow me to use 16GB on a 4GB server? Sandra

  Read the article

• Can I use a wireless-N laptop as an NAS for seamless and fast data transfer and access?

  - by techaddict

  I have a nice spare laptop (Dell 15R, one year old) that I was wondering if I could use as an NAS. The laptop has an E-Sata port, and I was wondering if I could set it up and plug in a few hard drives permanently (meaning I won't be unplugging it) to the eSata port and use the laptop as a wireless NAS to seamlessly and wirelessly store and access my files. To see more about what I'm looking for in the NAS to see if it's possible to use my other laptop for this purpose, see my other question: Is it possible to have a wireless in-house NAS with wireless data transfer rates of equivalent to SATA speeds? Alternatively, would it be better to sell the laptop and buy a dedicated NAS?

  Read the article

• X locks up with konqueror on comics.com

  - by retracile

  If I browse to comics.com using konqueror under KDE on Fedora 11, X will, after a delay, lock up. The mouse will move, but no keyboard input is recognized, and the screen does not react to the mouse passing over objects on screen. I am able to ssh into the machine and issue shutdown -r now and have that work. The machine is a Dell XPS M1330 with Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c), and Fedora 11 is fully updated. Visiting the same site in Firefox does not cause a lockup. I am booting with nomodeset since it won't boot into X otherwise. I tried the other two accel options: EXA (still locks up) and XAA (X won't start). Any suggestions on how I can debug this? bugzilla

  Read the article

• Virtualbox 4 hangs when trying to install ubuntu guest on ubuntu host system

  - by misterjinx

  I'm trying to install ubuntu server using virtualbox 4.0.4 in a ubuntu 10.10 host OS. I have the iso image on my hard drive which I used to perform the install. I edited the settings and added this image at the storage section, selected it as a primary master, so I could boot from it and start the install process. But now, each time I start the installation, at the very beginning or if I'm lucky, after I click on the install link at the welcome screen, the process hangs and all the computer is blocked. This happened 3 times already. I even tried to perform the installation using an old CD I had with the 9.10 server version, thinking that the iso image might be the issue, but the problem still persists. I dont know what could cause this problem. My computer is a dell laptop with AMD processor (I dont know if this is important). Any help is very appreciated.

  Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >