Search Results

Search found 2597 results on 104 pages for 'dell 2950'.

Page 70/104 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• RAID 5 RECONSTRUCT with RAID Reconstructor

  - by user22914

  I have Dell Poweredge server 2600 with Raid 5 in 3 hard drive Scsi 36gb each, it was fail to boot sinc the third drive is offline. I attached Sata card adapter to Sata hard drive and install OS SERVER 2003 to it, downloaded drivers for Raid and everything goes fine when I use recovery data software called "GetDataBack" from here http://www.runtime.org/data-recovery-software.htm but the problem that not all data recovered, I am still looking for importants data with about 5 GB size. I have another software called "RAID Reconstructor" from "http://www.runtime.org/raid.htm" I thought if I run it to reconstruct that will help to recover more data and put the third drive to be Online but I am afraid that might erase the current data in the other drives. Please I need your advise in how I could retrive the remaining data? Thanks

  Read the article

• How to change RDS licensing mode from 'per user/device' to 'Remote control for administrators' on Wi

  - by Prashant Mandhare

  We have installed windows 2008 R2 enterprise on a Dell server. This server is placed remotely in data center and only administrator is going to access it for maintenance purpose. No multiple users or client remote access is needed Now during 'remote desktop services' role installation network admin accidentally selected 'per user/device' licensing mode. Because of which now 120 days free try period is ticking. Since only administrator is going to access this server remotely we need to have 'Remote control for administrators' licensing mode (like windows 2003) on it. How we can change licensing mode from 'per user/device' to 'Remote control for administrators' on 2008 server? Also will it be possible to do this change remotely using RDC session itself? or do i need to change it using physical console (if remote access is gonna be disabled during switch)?

  Read the article

• How to disable Bluetooth auto-answer on Windows 7?

  - by MarkR

  When my BlackBerry 9630 is connected via Bluetooth to my Dell desktop running Windows 7 x64 there are a bunch of Bluetooth services enabled on Windows Advanced Audio BB Bypass service BB Desktop Service Dial-up Networking Headset Audio Gateway Remote Control Remotely Controlled Device When a call arrives on the 9630 Windows immediately answer the call. This is annoying when windows answers the phone before I even hear an audible ring and the hapless caller is saying, "hello. hello" on top of music I have playing. Does anyone know how to tell Windows not to answer the call? I want to be able to don my headset, switch audio to my headset, THEN manually answer the call.

  Read the article

• Recommendations on laptops - long battery life, slim, Windows 7

  - by molecule

  Hi, I have been looking at a couple of laptops... The most important requirement is long battery life, slim & light, and runs Windows 7. One that seems to fit the bill is the Sony Vaio Z series laptops. They claim to have long battery life, have some really impressive specs (on paper) and a very nice design. They are not on sale where I am yet but has seen/used them? Second would be the Lenovo Thinkpad IBM x301 For business users, Thinkpad seems to be the way to go. I have also considered Dell Alienware M11x but may not be completely appropriate for business use? What would you recommend with a budget of USD1500-2000?

  Read the article

• How to preserve sysprep from changing Default User settings

  - by user33794

  I'm having diffculties configuring 20 new Dell Vostro minis here. I set up one of them with my preferred OS, applications and settings, especially the Visual Effects Settings of Windows XP. I set them to best performance and deactivated everything else in the box. I copied this profile to Default User Profile and did sysprep -mini -reseal. After capturing this image and deploying it again, the desktop settings are correct except the visual effects settings. fading and everything else is reenabled for each new user which is created on the system. How do I preserve my settings from being overwritten by sysprep? thanks!

  Read the article

• w2k3 chkdsk errors as vmware 1.8 guest

  - by Sean Kirkpatrick

  We have two Dell servers (CentOS 5.x) hosting a variety of VMs including 3 W2K3 and 1 W2K servers as guests as well as a handful of other Linux guests. Each Windows VM has 2 drives, C: and D:. on 2 of the W2K3 and the W2K boxes we have recurring errors appearing on a daily basis as reported by CHKDSK. We'll run CHKDSK /f and reboot all affected machines and the errors are reported as fixed. The next day CHKDSK will report the same errors. None of the linux guests nor either host report errors when the are rebooted. The RAID controllers are not reporting errors. We're beginning to think that these are phantom errors somehow, but I'm not willing to go to the bank on that just yet. Anybody have similar experiences or advice? Thanks! Sean

  Read the article

• Problems with 2 ISCSI connections esxi 3.5

  - by rphilli5

  I am running a dell poweredge 1950 with 4 nic cards. 1 is bonded to SAN #1 on 192.168.90.xx. The second SAN is on a separate network - 192.168.7.xx The network adapter can view the ip range of the san and the NIC can be pinged from 192.168.7.xx range. vswitch1 and vswitch2 are configured identically except for the ip address. The second SAN has been added to the iscsi software adapter but the SAN is never recognized. I can connect to the SAN from other machines on the local network. Is there something else that needs to be configured for the iscsi software adapter to know which vswitch to use?

  Read the article

• Windows 7 BSOD at same occasions

  - by Tarnschaf

  Since I installed Win7 on my DELL Inspiron 1520 notebook, I frequently experience BSODs. I noticed that those nearly only happen on two occasions disconnecting a Bluetooth DUN connection selecting a file for upload in a browser (i.e. clicking on the button, shortly after the file dialog opened) The BSOD doesn't appear always on these actions. BluescreenView told me that most of the time it is srv2.sys+45883 or srv2.sys+42982 or ntoskrnl.exe+71f00 Now I read that srv2.sys is for NETBIOS sharing, which could be triggered when opening the file open dialog. All unused NICs are deactivated. Any ideas how to fix this?

  Read the article

• Ubuntu dual monitor set up - taskbars appear on other monitor

  - by DisgruntledGoat

  I'm trying to get my TV (connected via HDMI cable) to act as a second monitor to watch video etc. The TV is to my left, so in Display Preferences I unticked "Mirror Screens" and put the monitors like this: -------- ---------- | PC | | TV | | | ---------- -------- When I do this, the PC monitor comes up with just the desktop wallpaper and the interface - taskbar and windows, etc - moves to the TV screen. But if I swap the monitors around, the taskbars are still on the TV screen, with the windows (and desktop icons) on the PC screen. Is there a way to set the computer monitor as the main one and the TV as the second screen? PC: Dell Inspiron 531 Monitor: Samsung SyncMaster 720N TV: Philips 26PFL5522D LCD TV

  Read the article

• 8Gb Fiber Channcel HBA vs. 10 Gb SPF+ Converged HBA

  - by Hossein Aarabi

  I am putting a Dell server together, more specifically R720. I have to select the correct Host Bus Adapter. This HBA on R710 will connect to a storage device. I am confused between these two: QLogic 2562, Dual Port 8Gb Optical Fiber Channel HBA (price $2,045) QLogic 8262, Dual Port 10Gb SFP+, Converged Network Adapter (price $1,618) I thought since the QLogic 2562 is a fiber channel and is more expensive then it is faster in terms of IOPS. But, it is a 8Gb as opposed to 10 Gb of SFP+. My questions: Which one is better (IOPS performance, etc.)? Why should I choose one over another?

  Read the article

• How to charge an iPhone on a Windows PC without Installing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• 3 Monitors powered from a Nvidia fx580

  - by user26067

  I have a NVidia FX580 card in a Dell Precision T1500. The outputs of the back of the card are DVI and 2x displayport. I tried to run 3 screens from the DVI + 2x displayport to dvi adaptors, but the card won't have it... It'll only run 2 of these screens at the same time. http://www.nvidia.com/object/product_quadro_fx_580_us.html says; **Display Support:** Dual Link DVI-I 1 DisplayPort 2 # of Digital Outputs 3 ( 2 out of 3 active at a time ) # of Analog Outputs 1 To me this reads that it will be able to power 2xdvi monitors and 1xvga monitor. Anyone care to confirm or speculate?

  Read the article

• Can I flash a PCI-E device's Firmware in a VM if the VM has exclusive IOMMU access?

  - by RibaldEddie

  I have a PCI-E Dell Perc 6/i RAID card that I'd like to flash with the latest firmware. Apparently I need either a Redhat / Centos OS or Windows in order to flash the firmware, but I have a VMWare 5.0.1 ESX hypervisor installed on the box and a CentOS guest OS. My motherboard support IOMMU and I have successfully used VMWare's PCI Passthrough feature to give VMs exclusive access to a PCI-E device. Is it safe to flash the firmware of a PCI-E device if that device is passed through to a single VM using the passthrough feature of VMware? Or should I boot one of the supported OSes directly on the bare metal?

  Read the article

• "Input not Supported" on external monitor

  - by Shalan

  when it rains, it pours! Im helping a friend with his Dell Inspiron 1520. The hdd crashed and and top of that, the screen is cracked. I've replaced the hdd (SATA-5400), but the lcd replacement is only comin in a months time. I've tried to: hook the laptop up to an Acer 18.5" lcd monitor via VGA, boot up into Windows 7 installer, get to the Step-1 screen, Switch to external display (Function-F8) ...and get the "Input not supported" message on the Acer lcd. I know that this is a resolution problem, but cant for the life of me figure out how to solve this. I've also tried, hooking it up to my TV via Composite cables (got a VGA-Composite adaptor). Please could someone advise me what to do? -Thank u!

  Read the article

• What would be the optimal disk config for SQL Server 2008 R2?

  - by Kev

  We have a new Dell R710 server that came with the following storage configuration: 8 x 146GB SAS 10k 6Gbps disks 1 x Perc H700 Integrated Controller (2 x 4 disks - 2 ports each supporting 4 disks) What would be the optimal configuration if we were just after performance? What would be the optimal configuration if we were after performance but wanted data resilience. As per 2 above but with a hot standby disk? We plan to run Windows 2008 R2 and SQL Server 2008 R2. Maximising storage capacity isn't a prime concern.

  Read the article

• Broadcom NIC Teaming with Hyper-V R2

  - by Brian McCleary

  I have read a few contradictory articles regarding support or at least configuration with teaming of Broadcom NIC's and Hyper-V. I have a pair of Dell R805's with 4 Broadcom 5708 NIC's in them. I have teamed them up (one team for public connections and one for private connections) and I have installed Hyper-V. I am getting some intermittent connection issues though and I'm concerned that it might be due to the teaming. Basically I am wondering if anyone has successfully setup NIC teaming in the parent partition and used the teamed adapters through the Hyper-V switch. If so, what is the configuration/proper steps that you used to configure this. I have the server running Windows Server 2008 R2. Right now the server is in test mode, but my concern is that we won't see any issues until we move it into production and get some heavy traffic on the ports.

  Read the article

• SSD for Visual studio : Intel X25-m G2 or OCZ Vertex

  - by meska

  hi, looking for laptop upgrade, and thinking about SSD drive. Laptop would be Dell Studio XPS with T9400 as i can get one for a very good price. So i was thinking about replacing the built in 500 GB hdd with some kind of SDD Currently two choices: OCZ Vertex Series 60 GB vs. Intel X25-M G2 MLC 80 GB Price is almost the same. From anandtech Intel performs badly in sequential write, but scores very high numbers in random write and random read (good for visual studio?) and i get more space. What do you think? OCZ Vertex or Intel X25-M G2 ? Purely from Visual Studio 2008 and upcoming 2010 perspective?

  Read the article

• Real VNC won't connect to OS X Leopard VNC server

  - by Pselus

  I have 3 machines. 2 Macs, 1 Dell. 1 of the Macs is running as a VNC server and the other Mac connects great with Chicken of the VNC. Sadly, this app does not exist for Windows so I'm using RealVNC to view from Windows. I connect the exact same way as with the Mac, but on Windows when it connects, I see a program pop up and then immediately close. I have tried all options available on RealVNC and nothing changes things. Anyone have any idea what I can do to fix this?

  Read the article

• Recover lost NTFS partition on SSD

  - by Emil

  Hello, About 2 month ago I upgraded my Dell Latitude E6500 laptop with a Corsair Force F120 SSD drive. Everything worked well until about a week or so back. I started the computer and was faced with a beep and a message saying "No boot sector on Internal HDD (IRRT). No bootable devices". Since I figured that the boot sector had somehow got corrupt I tried booting from the Windows 7 dvd in order to repair the boot sector. But the Windows 7 installation program only found a blank drive with 111GB of unallocated space. I panicked and brought the drive with me to work to let a colleague have a look at it. We made a disk image of the entire drive and ran the drive through Testdisk in Linux. Testdisk did not find any partitions. It appears that the drive has been completely erased... What has happened? What is causing this behavior on an SSD?

  Read the article

• Dual Nic, one keeps dropping

  - by user1215018

  I'm running windows server 2008 r2 on a dell poweredge 2850. I have 2 NICs, one is configured behind a firewall with a dhcp server on the main local LAN and another one has it's own dedicated connection to one of our 13 static IPs. So in a nutshell we have 2 of our static IPs going to this server, one indirectly through a firewall/dhcp server, and the other directly. I am trying to reach IIS on port 80 and port 443. The problem is that the NIC with the direct connection (NIC2) keeps dropping and says either "No internet connection" or "Unauthenticated". However, the NIC behind the firewall (NIC1) has no problems at all. Update: This is the second time this has happened in 3 days and each time the fix has been enabling the dhcp client on the NIC, allowing it to error out to a 169.x.x.x address, then re-enabling the nic with it's static IP assignment.

  Read the article

• Why does Ubuntu 11.10 hang frequenty?

  - by ParveenArora

  I've been using Ubuntu from a long time and recently I have shifted to its newest version 11.10. Its interface is nice but my touch-pad hangs frequently in short intervals of time. When that happens, no key or key combination works. The only option is to restart or logout my laptop. I am using a Dell Inspiron N4010. I have tried a lot to solve this problem but haven't found any satisfactory help till now. Most of my friends who are using Ubuntu 11.10 reported the same to me, seems like it's a bug. How can I get out of this problem?

  Read the article

• Set iDRAC IP Address on Ubuntu 12.04 without Reboot?

  - by BT643

  We have a Dell PowerEdge R720XD server and want to setup iDRAC, but this is a production server so we need to do it without a reboot if possible. We just need to set the IP address on the iDRAC but the servers do not have a front LCD panel so we cannot use this. The iDRAC will currently have the default 192.168.0.120 IP address but we are not on this IP range so cannot use this. We need to change it to 192.168.5.x. I've seen racadm mentioned, but before I start messing around installing this on Ubuntu, is this what we need? and will we be able to set the IP address on the DRAC with this? Thanks

  Read the article

• Wireless and Wired Network Access at same time?

  - by grasper

  At work, I use a laptop. It is a Dell Latitude D630 with Windows XP. I work in a lab environment where I need to use the Ethernet Port as a Static IP to interact with a local network (which cannot talk to the outside world). What I would like to do is use the Wireless as the internet connection so i can check email, etc at the same time I am using the ethernet network... It seems like this is not possible. Is there a piece of software or a way to configure it to allow me to do this?

  Read the article

• External Hard-Drive Randomly Ejects; Stays On

  - by Kaleb F.

  My 250GB I/O Magic USB external hard-drive randomly disconnects / ejects from the computer after between 2-30 minutes of use. When this happens, the blinking activity light on the front of the hdd turns off; however, the disks can still be heard spinning. Unplugging & replugging in the USB does not reconnect the device and the activity light remains unlit. The only way to continue using it is to flip off then on the power switch of the hdd. The hard-drive was formatted with MBR partition table and 2 NTFS volumes. I recently tried switching to GUID with two Mac OS Extended (Journaled), but the problem remains. This error occurs with my new Macbook Pro with Snow Leopard as well as with my DELL E520 with Windows 7 Ultimate.

  Read the article

• Flash Player in Windows 7 X64 problems

  - by Flupkear

  I'm having a lot of problems with flash player in my win 7 X64 laptop, in YouTube the videos are completely black, you can only hear the sound and in Vimeo the videos are played well in normal size but completely black in fullscreen. Also some days ago YouTube played normal size videos but with controls not visible. I'm sure that the problem isn't the browser since this happen in Chrome, Firefox and IE 8. My laptop is a Dell XPS L501X, the flash version is 10,2,152,26 and the OS is Windows 7 Home Premium with SP1. I'll appreciate any help.

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >