Search Results

Search found 7747 results on 310 pages for 'dev karl'.

Page 71/310 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

• Software RAID 1 Configuration

  - by Corve

  I have created a software RAID 1 quite some while ago and it always seemed to work for me. However I am not completely sure that I have configured everything right and do not have the experience to check so I would be very grateful for some advice or just verification that all seems right so far. I am using Linux Fedora 20 (32 bit with plans to upgrade to 64bit) The RAID 1 should consist of two 1TB SATA hard drives. This is the output of mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Sun Jan 29 11:25:18 2012 Raid Level : raid1 Array Size : 976761424 (931.51 GiB 1000.20 GB) Used Dev Size : 976761424 (931.51 GiB 1000.20 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Sat Jun 7 10:38:09 2014 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : argo:0 (local to host argo) UUID : 1596d0a1:5806e590:c56d0b27:765e3220 Events : 996387 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 0 1 active sync /dev/sda The RAID is mounted successfully: friedrich@argo:~ ? sudo mount -l | grep md0 /dev/md0 on /mnt/raid type ext4 (rw,relatime,data=ordered) Basically my question are: Why do I only have 1 active device? What does the State removed at bottom mean? Also I noticed some strange error messages that I see on the console on system start and shutdown and always repeating in the background when I switch with Ctrl + Alt + F2: ... ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: COMRESET failed (errno=-32) ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ... Are these errors related to the RAID? Something seems wrong with the SATA devices.. All together the system works (I can read and write to the mounted raid) but I always had these strange errors on startup shutdown (probably always in the background). Thx for your help

  Read the article

• Disk doesn't contain a valid partition table

  - by Jeevan Dongre

  I was running a m1.small instance ec2 ubuntu instance. I was running out of disk space, so I upgraded my instance to medium. When I upgraded I actually got 429.5 GB of space and after that I added 10 gb of volume too. When I run the "sudo fdisk -l" command I got this results. Disk /dev/sda1: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda1 doesn't contain a valid partition table Disk /dev/sda2: 429.5 GB, 429461078016 bytes 255 heads, 63 sectors/track, 52212 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda2 doesn't contain a valid partition table Disk /dev/sdf: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 sda1 is the primary parition and sda2 is what I got added upgrading my system to medium. But the problem persists, I am not able to pull the code from git, it is giving me this error. remote: Counting objects: 409, done. remote: Compressing objects: 100% (236/236), done. fatal: write error: No space left on device fatal: index-pack failed

  Read the article

• MTD mtd3ro backup returns BCH decoding failed

  - by saeed144

  While doing a kernel backup of an mtd (Memory Technology Device) from /dev/mtd/mtd3ro of a TI board gives many "BCH decoding failed", Here are system info #cat /proc/mtd dev: size erasesize name mtd0: 00080000 00020000 "X-Loader" mtd1: 00140000 00020000 "U-Boot" mtd2: 000c0000 00020000 "U-Boot Env" mtd3: 00500000 00020000 "Kernel" mtd4: 1f880000 00020000 "File System" here is the method used, dd if=/dev/mtd/mtd3ro of=/data/local/tmp/mtd3.bin doing a cat also returns the same error, and here is the error, BCH decoding failed BCH decoding failed yes, the destination has enough space ;) tell me what do you think? Thanks

  Read the article

• Passing multiple sets of arguments to a command

  - by Alec

  instances contains several whitespace separated strings, as does snapshots. I want to run the command below, with each instance-snapshot pair. ec2-attach-volume --instance $instances --device /dev/sdf $snapshots For example, if instances contains A B C, and snapshots contains 1 2 3, I want the command to be called like so: ec2-attach-volume -C cert.pem -K pk.pem --instance A --device /dev/sdf 1 ec2-attach-volume -C cert.pem -K pk.pem --instance B --device /dev/sdf 2 ec2-attach-volume -C cert.pem -K pk.pem --instance C --device /dev/sdf 3 I can do either one or the other with xargs -n 1, but how do I do both?

  Read the article

• OpenVZ kernel panic

  - by GtoXic

  I recently installed OpenVZ on my VMWare box (To do some testing) and I get the following: https://www.dropbox.com/s/p38btkv5j84bvsh/Capture.JPG the GRUB config is as follows: # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00 # initrd /initrd-version.img #boot=/dev/sda default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title OpenVZ (2.6.32-042stab057.1) root (hd0,0) kernel /vmlinuz-2.6.32-042stab057.1 ro root=/dev/VolGroup00/LogVol00 sysfs.deprecated=1 initrd /initrd-2.6.32-042stab057.1.img title CentOS (2.6.18-238.el5) root (hd0,0) kernel /vmlinuz-2.6.18-238.el5 ro root=/dev/VolGroup00/LogVol00 initrd /initrd-2.6.18-238.el5.img

  Read the article

• Apache and MySQL not working well after extending filesystem

  - by xtrimsky

  I had 4Gb on my /var (/dev/mapper/vg00-var) filesystem, and I wanted to extend it to 160Gb. I did it following this tutorial: http://faq.1and1.com/dedicated_servers/root_server/linux_admin_help/7.html Now I have 160: Filesystem Size Used Avail Use% Mounted on /dev/md1 4.0G 424M 3.6G 11% / /dev/mapper/vg00-usr 4.3G 1.4G 3.0G 32% /usr /dev/mapper/vg00-var 198G 6.5G 192G 4% /var /dev/mapper/vg00-home 4.3G 4.4M 4.3G 1% /home none 1.1G 0 1.1G 0% /tmp Now I have a problem, in order for Apache to work, each time I reboot, I need to also reboot apache: "apachectl -k restart" which is already terrible. I think this is because /var contains the htdocs The worst part is, mysql is not starting at all. Mysql has some files also in /var What have I done wrong ?? :( Thank you EDIT: Attaching /var/log/mysqld.log: 120602 11:17:44 InnoDB: Waiting for the background threads to start 120602 11:17:45 InnoDB: 1.1.8 started; log sequence number 8354009 120602 11:17:45 [ERROR] /usr/libexec/mysqld: unknown variable 'set-variable=local-infile=0' 120602 11:17:45 [ERROR] Aborting 120602 11:17:45 InnoDB: Starting shutdown... 120602 11:17:46 InnoDB: Shutdown completed; log sequence number 8354009 120602 11:17:46 [Note] /usr/libexec/mysqld: Shutdown complete 120602 11:17:46 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended

  Read the article

• How do I change the console resolution of Ubuntu 9.10 Server running on VMWare?

  - by Raam Dev

  I'm running Ubuntu 9.10 Server in VMWare Fusion (on a Mac) and I'm having trouble changing the console resolution. It seems to be stuck on 640x480. Ubuntu 9.10 uses Grub2, so there is no /etc/grub/menu.lst. I tried adding vga=791 to the kernel parameters (both during boot and by adding it to GRUB_CMDLINE_LINUX_DEFAULT in /etc/default/grub and then running update-grub2) and neither had any effect. When using vga=791, grub says that vga=791 is depreciated and that I should use gfxpayload=1024x768x16,1024x768 instead. However, that also does absolutely nothing. I have a feeling this problem is specific to running Ubuntu 9.10 in VMWare, but Google hasn't turned up anything.

  Read the article

• The plugin of munin is always timed out

  - by haoX

  I want to use munin to make a graph of ttyACM0 in Linux, but munin can not create the graph. I found some information in "munin-node.log". it shows that "Service 'temperature' timed out". So I changed timeout to 60 or 120 in /munin/plugin-conf.d/munin-node, but it does not work. It's also timed out. Here is part of my code: if [ "$1" = "config" ]; then echo 'graph_title Temperature of board' echo 'graph_args --base 1000 -l 0' echo 'graph_vlabel temperature(°C)' echo 'graph_category temperature' echo 'graph_scale no' echo 'graph_info This graph shows the temperature of board' for i in 1 2 3 4 5; do case $i in 1) TYPE="Under PCB" ;; 2) TYPE="HDD" ;; 3) TYPE="PHY" ;; 4) TYPE="CPU" ;; 5) TYPE="Ambience" ;; esac name=$(clean_name $TYPE) if [ "$TYPE" != "NA" ]; then echo "temp_$name.label $TYPE"; fi done exit 0 fi for i in 1 2 3 4 5; do case $i in 1) TYPE="Under PCB" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $1}') ;; 2) TYPE="HDD" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $2}') ;; 3) TYPE="PHY" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $3}') ;; 4) TYPE="CPU" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $4}') ;; 5) TYPE="Ambience" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $5}') ;; esac name=$(clean_name $TYPE) if [ "$TYPE" != "NA" ]; then echo "temp_$name.value $VALUE" fi

  Read the article

• Ubuntu+Win7--disk error press any key to restart

  - by Siddharth

  Apparently,none of the solutions in any other posts and forums worked for me For some reasons I decided to remove ubuntu from my hard disk drive. My partition table(presently): (/dev/sda1) (fat32) 900 MiB ---(MBR,I suppose) (/dev/sda2) (ntfs) 70 GiB -----(Windows 7) (/dev/sda3) (ntfs) 314.88 GiB --(Personal File storage) (/dev/sda4) (ext4) 80 GiB -----(Ubuntu 13.04) (unallocated) -----1.31 MiB So,after moving(cut-paste) everything(for backup) from the fat32 partition using win7..I booted into Ubuntu and copied the remaining 3 files(hidden in Win7 file explorer) --bootmgr,bootsect.bak,and one more which I do not remember.TERRIBLE MISTAKE After this I again booted into Windows and deleted ext4 partition..formatted it to ntfs..and shut down the pc.Then,I put in a Win7 bootable USB..using command prompt I entered bootrec /fixmbr,and bootrec /fixboot.. Restarting showed me the GRUB..choosing windows 7 showed me "Disk Error. Press any key to restart." I also installed a fresh Win7 installation on the 80 GiB partition expecting a Windows Legacy Bootloader with two win7 options..but did not work. Then..I used a Ubuntu LiveUSB to put it back to the present configuration(above) since all methods to restore the MBR failed.. I copied back the fat32 partitions backup files but couldn't copy those 3 files.Somehow ,they had been recreated and were non-replaceable. I do not want to format the win7 partition for a fresh one. I have used boot-repair..Restore MBR option brings back to "Disk error...." without even going through grub..so I reinstalled grub and I'm able to boot into Ubuntu. grub menu shows the win7 option as "Windows 7 (loader) (on /dev/sda1)". paste.ubuntu.com/5753710 paste.ubuntu.com/5775999

  Read the article

• How do I troubleshoot a server I can't get logged into?

  - by Karl

  This morning I am unable to log into SQL Server because it appears to be busy doing something, so much so that CPU usage is constantly at 98%-99%. I am guessing that something has gone wrong with the maintenance plan that ran over the weekend, but I can't get into the error logs see what is happening. On logging in I keep getting messages like "insufficiently memory in the buffer pool" and "the server is not responding". Is there any way I can figure out what is happening without logging onto to the server? Or some way I can squeeze in a login?

  Read the article

• unable to mount disks in usb dvd drive

  - by Arcath

  I have 2 USB DVD drives. One that I borrowed from work which I have been testing with which works fine for me, which is why I brought one of myself. When I try and mount my new dvd drive this happens: [18:06:45][arcath@londinium][~] sudo mount /dev/sr0 /mnt/dvd/ mount: special device /dev/sr0 does not exist /dev/sr0 is only in the list when the drive is attached and it works on other machines using the same cables so it must be something with my server. The server is running Ubuntu 10.10 server

  Read the article

• How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xubuntu?

  - by atticus

  I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83 I could just use the wireless tether app for android, but I can't get my Netgear wg511 v2 (made in China) wireless card to work in this laptop either. But that's another post for later.

  Read the article

• Ubuntu 13.10 - How to disable LVM and cryptsetup? cryptsetup: evms_activate is not available

  - by NeverEndingQueue

  I am trying to remove whole drive encryption from my Ubuntu installation. I've run Ubuntu from Live CD, mounted crypt partition and copied it to another partition /dev/sda3. sudo cryptsetup luksOpen /dev/sda5 crypt1 sudo dd if=/dev/ubuntu-vg/root of=/dev/sda3 bs=1M After that I've run boot-repair: https://help.ubuntu.com/community/Boot-Repair Added entry to /etc/fstab: UUID=<uuid> / ext4 errors=remount-ro 0 1 Of course I've replaced with blkid result of my /dev/sda3. I've also deleted overlayfs and tmpfs lines from /etc/fstab. (I've just compared it to content of /etc/fstab in non-encrypted Ubuntu installation and could not find overlayfs and tmpfs). I've chrooted from LiveCD into my system and rebuilt initramfs: http://blog.leenix.co.uk/2012/07/evmsactivate-is-not-available-on-boot.html I've also removed cryptsetup using apt-get remove. Basically I can easily mount my system partition from Live CD (without setting up the encryption and LVM stuff), but can not boot from it. Instead I see: cryptsetup: evms_activate is not available When I've chosen the Recovery mode I've seen this: Begin: Mounting root file system ... Begin: Running /script/local-top ... Reading all physical volumes. This may take a while ... No volume groups found cryptsetup: evms_activate is not available Begin: Waiting for encrytpted source device ... My /etc/crypttab is empty. I am pretty sure that system tries to find encrypted partition, search for LVMs etc. Do you have ideas what could be the problem or how can I fix it? Thanks

  Read the article

• Can't mount hard drive. Ubuntu 12.04

  - by Sam

  I am trying to recover some pictures on my 320 GB Hard Disk, so I put in a Live Ubuntu CD and am in that right now. In the devices list, it shows my USB drive, but not my 320 GB Hard Disk. I can see the disk in Disk Utility (it says it's on /dev/sda), but it's not mounted, and it says it has a few bad sectors but it is OK. In Disk Usage Analyzer, it says my maximum capacity is 13.4 GB, so it's definitely not using the 320 GB Hard Disk. I tried the following: sudo mkdir /media/newhd (worked) sudo mount /dev/sda /media/newhd (didn't work. it says I must specify the filesystem type) I then tried: fsck.ext4 -f /dev/sda (didn't work. Said: Superblock invalid, trying to backup blocks. then: Bad magic number in super-block while trying to open /dev/sda. The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock) Does anyone have any ideas? The whole problem started when my Windows Vista said "Can't find operating system". Any ideas on how I can get on to my hard drive at /dev/sda?

  Read the article

• New Google Chrome Beta?

  - by Tyilo

  I currently have Google Chrome dev version installed, however visting http://www.soundstep.com/blog/experiments/jsdetection/, it said I needed to install Google Chrome Beta. Isn't dev higher than beta? I thought there was these versions of Google Chrome, from lowest to highest version: Stable Beta Dev Canary (Chromium) Is the detection of my browser failing on the website, or have Google Chrome changed their versioning system? Download link for the "new" chrome beta: https://www.google.com/landing/chrome/beta/

  Read the article

• Ways to setup a ZFS pool on a device without possibility to create/manage partitions?

  - by Karl Richter

  I have a NAS where I don't have a possibility to create and manage partitions (maybe I could with some hacks that I don't want to make). What ways to setup multiple ZFS pools with one partition each (for starters - just want to use deduplication) exist? The setup should work with the NAS, i.e. over network (I'd mount the images via NFS or cifs). My ideas and associated issues so far: sparse files mounted over loop device (specifying sparse file directly as ZFS vdev doesn't work, see Can I choose a sparse file as vdev for a zfs pool?): problem that the name/number of the assigned loop device is anything but constant, not sure how increasing the number loop device with kernel parameter affects performance (there has to be a reason to limit it to 8 in the default value, right?)

  Read the article

• Unable to ping between subnets and out to internet

  - by battlemidget

  My setup is Modem - Linksys router - Laptop with 2 devices (wlan0/eth0) - desktop machine Router is 192.168.1.1 gateway to the internet Laptop wlan0 is 192.168.1.4 with a gw of 192.168.1.1 Laptop eth0 is 192.168.2.254 which acts as a second gateway desktop is 192.168.2.100 On laptop i've setup ip_forward to 1, and have inserted 2 iptables rules -A FORWARD -i eth0 -o wlan0 -j ACCEPT -A FORWARD -i wlan0 -o eth0 -j ACCEPT The laptop can ping outside the network (i,e, yahoo.com) it can not ping 192.168.2.100. The desktop can ping 192.168.2.254 but nothing outside the network or 192.168.1.0 subnet. On laptop ip route show lists: 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.254 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.4 127.0.0.0/8 dev lo scope link default via 192.168.1.1 dev wlan0 What am I missing to make my desktop go through the laptop in order to access the router which provides access to the internet? Thanks

  Read the article

• OpenVPN + iptables / NAT routing

  - by Mikeage

  I'm trying to set up an OpenVPN VPN, which will carry some (but not all) traffic from the clients to the internet via the OpenVPN server. My OpenVPN server has a public IP on eth0, and is using tap0 to create a local network, 192.168.2.x. I have a client which connects from local IP 192.168.1.101 and gets VPN IP 192.168.2.3. On the server, I ran: iptables -A INPUT -i tap+ -j ACCEPT iptables -A FORWARD -i tap+ -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE On the client, the default remains to route via 192.168.1.1. In order to point it to 192.168.2.1 for HTTP, I ran ip rule add fwmark 0x50 table 200 ip route add table 200 default via 192.168.2.1 iptables -t mangle -A OUTPUT -j MARK -p tcp --dport 80 --set-mark 80 Now, if I try accessing a website on the client (say, wget google.com), it just hangs there. On the server, I can see $ sudo tcpdump -n -i tap0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on tap0, link-type EN10MB (Ethernet), capture size 96 bytes 05:39:07.928358 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 558838 0,nop,wscale 5> 05:39:10.751921 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 559588 0,nop,wscale 5> Where 74.125.67.100 is the IP it gets for google.com . Why isn't the MASQUERADE working? More precisely, I see that the source showing up as 192.168.1.101 -- shouldn't there be something to indicate that it came from the VPN? Edit: Some routes [from the client] $ ip route show table main 192.168.2.0/24 dev tap0 proto kernel scope link src 192.168.2.4 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.101 metric 2 169.254.0.0/16 dev wlan0 scope link metric 1000 default via 192.168.1.1 dev wlan0 proto static $ ip route show table 200 default via 192.168.2.1 dev tap0

  Read the article

• Setting up a subdomain on IIS7

  - by EvanGWatkins

  I have a dev server for my C# Web Application and to access the dev site I go to the server name in my browser (lfi-fsxmv06) and I can access my web application. Now I want to set up a subdomain of that (test.lfi-fsxmv06) is this possible? My bindings on the dev site (lfi-fsxmv06) are http with port 80 and ip address *, and the hostname is blank. My bindings on the subdomain site are http, port 80, IP adddress *, and the hostname is test.lfi-fsxmv06 however if I try t

  Read the article

• Does urandom share the same entropy of random?

  - by ???

  Does the entropy pool /dev/random used the same to /dev/urandom? I want to mknod /dev/random 1 9 to replace the slow random, I think the current entropy is randomly enough, if urandom is based on the same entropy, and all succeed random numbers are generated based on that entropy, I don't think there'll be any vulnerable.

  Read the article

• Linux missing disk space

  - by cpt.Buggy

  I have KVM vps with strange disk usage: # df -h Filesystem Size Used Avail Use% Mounted on /dev/sdb 493G 1.2G 466G 1% / tmpfs 4.0G 0 4.0G 0% /dev/shm /dev/sda1 96M 41M 51M 45% /boot # du -sh / du: cannot access `/proc/1633/task/1633/fd/4': No such file or directory du: cannot access `/proc/1633/task/1633/fdinfo/4': No such file or directory du: cannot access `/proc/1633/fd/4': No such file or directory du: cannot access `/proc/1633/fdinfo/4': No such file or directory 1021M / How could it be? Where are ~20G of free space?

  Read the article

• How do you get autofs and updatedb to work together?

  - by Veek.M

  /etc/my.misc sda1 -fstype=ntfs,user,exec :/dev/sda1 sda3 -fstype=ntfs,user,exec :/dev/sda3 sda4 -fstype=ntfs,user,exec :/dev/sda4 /etc/auto.master /my /etc/my.misc --ghost When I run locate .pdf, I get nothing because though the mount points (sda1, sda2, ..) are created in /my - there's nothing in them till I access them. Unfortunately this is not good enough for updatedb and it purges its cache of /my/sdaX files. How do I prevent/solve this problem?

  Read the article

• Boot stuck at blinking cursor before GRUB - only works via BIOS boot menu

  - by delta1

  I have a new box running Debian Squeeze. Grub is installed on /dev/sda, but when booting up I just get a blinking cursor, before the Grub menu. I can only boot to grub successfully when I choose boot options (during post) and select that specific drive! I have made sure the correct drive is set to boot first in the BIOS. So Grub works, but the system won't boot to that drive automatically? Any ideas on what could cause this? Drives sda/b/c are all 2TB (sda runs the system with b/c as raid device md0) with the following partitions: $ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 977 sda1 8 2 9765625 sda2 8 3 6445313 sda3 8 4 1937302627 sda4 8 32 1953514584 sdc 8 16 1953514584 sdb 9 0 1953513424 md0 but # fdisk -l /dev/sda gives WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 243202 1953514583+ ee GPT Any insight into this strange behaviour would be greatly appreciated.

  Read the article

• permission not to change on eth0 file?

  - by user133916

  I am logged in as a root user i want to edit my /etc/sysconfig/network-scripts/ifcfg-eth0 file when i edit this showing -- INSERT -- W10: Warning: Changing a readonly file while i have logged in as root user my mount showing [root@s1202 ~]# mount rootfs on / type rootfs (rw) /dev/root on / type ext3 (ro,data=ordered) /dev on /dev type tmpfs (rw) /proc on /proc type proc (rw) /sys on /sys type sysfs (rw) /proc/bus/usb on /proc/bus/usb type usbfs (rw)

  Read the article

• Restore Windows 7 Upgraded Computer

  - by Karl

  I have a laptop that came with Windows Vista and I purchased an upgrade to Windows 7. I upgraded the computer to Windows 7. Now I am selling my laptop and would like to restore the laptop to Windows 7 original without my files. I would also need to wipe all partitions as I dual booted Ubuntu on another partition. How do I preserve my license? What are the steps I need to take? Thank you superusers for your help!

  Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >