Search Results

Search found 13156 results on 527 pages for 'exchange move'.

Page 71/527 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

  • Move an SSD with Windows 7 to a new PCIe SATA controller card

    - by Shevek
    This is my current setup: Abit AB9 QuadGT motherboard which has an Intel P965 chipset with Intel ICH8 SATA Rev. 2.0 controller Kingston HyperX 3K 120GB SSD which supports SATA Rev. 3.0 Windows 7 Ultimate x64 For some reason I was unable to install Windows with the controller set in AHCI mode, even with the correct driver from Intel so it is currently in IDE mode. Due to the ICH8 controller being SATA Rev 2.0 and running in IDE mode, the SSD is operating well under it's published read/write speeds. I have ordered an Asus U3S6 controller card to add both SATA Rev. 3.0 and USB 3.0 to my computer. The motherboard does have a PCIe x4 slot available so I will hopefully achieve the full potential of my SSD. My question is this - am I able to swap the SSD over to the controller card from the motherboard controller without having to clean install Windows? I am hoping that all I will need to do is ensure that the controller card drivers are available to Windows and set the registry as per this KB article. Will this work or should I perform a clean installation?

    Read the article

  • Copy/move EBS volume from one Region to another

    - by Gnanam
    Background of our setup: We've hosted our web-based application in Amazon EC2 US East (Virginia) Region. Our instance is based on Linux distribution (CentOS) and AMI is S3-backed. 1 EBS volume (400 GB size) is attached to this instance. Question: We've planned to migrate our deployment to US West (N. California) Region. From AWS doc, I understood that for moving AMI, there is a command-line tool available - ec2-migrate-bundle. But for moving EBS volume across Region, currently there is no tool available. I'm looking for easiest and/or fastest way of copying/moving EBS volume from one Region to another. Also, are there any hidden risks involved during and/or after the migration? Experts ideas/suggestions/recommendations on this are highly appreciated.

    Read the article

  • Android software for the system administrator on the move

    - by GruffTech
    My company has over service through Verizon, and AT&T Service in the area is "shoddy" at its best, so I haven't been able to join the "iPhone party" like so many of my fellow system administrators have been able to. That being said, this week finally a phone I like has hit Verizon, the HTC Incredible. (I've been waiting for the Desire or Nexus One, but after seeing spec sheets and reviews, HTC Incredible comes out ahead anyway). So (finally) I'm looking for Android Apps that are "gotta-haves" for system administrators. I've found the bottom three. If there are others you prefer over these let me know. RDP Program - RemoteRDP SSH Client - ConnectBot Nagios - NagMonDroid Reply with your favorite Android App and why!

    Read the article

  • Cannot move Google Chrome tabs to different monitor in ubuntu

    - by Moses
    When I use Chrome in Windows, I can grab a tab and drag it over to my second monitor and it will automatically maximize. In ubuntu, when I try to do the same, the tab will snap back to my primary monitor and maximize there. There is a related bug report for Chromium that is labeled "fixed" here, but when I try using Chromium instead of Chrome, I get the same behavior (not what I called fixed). So far the only other thing I've tried is changing themes, resetting Chrome's settings to default and tested Chromium as I pointed out above. I've also tried installing Chrome from a live Linux disc, and the behavior is still the same. The issue does not occur with Firefox, but I need to use Chrome for work-related reasons, so simply switching isn't really an option personally (though it is a viable workaround). I'm using Chrome 30 and ubuntu 13.04. Does anyone have any solutions?

    Read the article

  • Moving mails from SBS 2008 to SBS 2011

    - by starchx
    we are going to upgrade server from SBS 2008 to a new hardware server with SBS 2011. Due to non-experience in Server Migration (eg, answer file), we have decided to choose Clean Install. We have 12 users so that's not too bad. The most challenge problem is to move over all the emails for each user, some user have 5GB inbox. The one method I know is to login to each user account and export the emails to PST file using Outlook 2007. Then connect to new SBS 2011 and import the PST into new inbox. Do we have any other better/quicker ways? Thanks

    Read the article

  • How can I move mysites to a new location

    - by Bob
    I recently restored my content and was instructed to create mysites in a different location than was originally used. Now I have several users mysites in /personal. The new desired location is /mysites. From what I found in the documentation I should back them up and restore them to the new location. Here's what I've done: Backup individual site collection for user mysite stsadm -o backup -url "https://myUrl/personal/john_smith" -filename johnsmith.bkup Restore individual site collection for user mysite stsadm -o restore -url "https://myUrl/mysites/john_smith" -filename johnsmith.bkup -overwrite The result of this and the problem is when i enumerate sites i end up with this: <Site Url="https://myUrl/mysites" Owner="domainname\john.smith" ContentDatabase="WSS_Content_MySites" StorageUsedMB="1.6" StorageWarningMB="90000" StorageMaxMB="100000" /> it leaves off the username part of the url. and if I restore more that one they want to overwrite each other.

    Read the article

  • Move the Public folders on Windows 7

    - by Omar Shahine
    This question is not about user folders, but rather the Public user folder on Windows 7. How do you map folders such as Music, Pictures, Video to a different location. If you right click, go to properties, and look at the location tab it's not editable on Windows 7.

    Read the article

  • How to move your Windows User Profile to another drive in Windows 8

    - by Mark
    I like to have my user folder on a different drive (D:) than my OS is (C:). Reading the following post I decided to give it a try. All went quite well, untill I found out that my Windows 8 Apps won't execute anymore (other than that I didn't noticed any problems). My apps do work, while using an account that isn't moved. In the eventviewer I've found error messages like these: App <Microsoft.MicrosoftSkyDrive> crashed with an unhandled Javascript exception. App details are as follows: Display Name:<SkyDrive>, AppUserModelId: <microsoft.microsoftskydrive_8wekyb3d8bbwe!Microsoft.MicrosoftSkyDrive> Package Identity:<microsoft.microsoftskydrive_16.4.4204.712_x64__8wekyb3d8bbwe> PID:<4452>. The details of the JavaScript exception are as follows Exception Name:<WinRT error>, Description:<Loading the state store failed. > , HTML Document Path:</modernskydrive/product/skydrive/App.html>, Source File Name:<ms-appx://microsoft.microsoftskydrive/jx/jx.js>, Source Line Number:<1>, Source Column Number:<27246>, and Stack Trace: ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:27246 localSettings() ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:51544 _initSettings() ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:54710 getApplicationStatus(boolean) ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:48180 init(object) ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:45583 Application(number, boolean) ms-appx://microsoft.microsoftskydrive/modernskydrive/product/skydrive/App.html:216:13 Anonymous function(object) Using ProcMon, I see a lot of access denied messages, like these: Date & Time: 12-9-2012 9:32:20 Event Class: File System Operation: CreateFile Result: ACCESS DENIED Path: D:\Users\John\AppData\Local\Packages\microsoft.microsoftskydrive_8wekyb3d8bbwe\Settings\settings.dat TID: 2520 Duration: 0.0000149 Desired Access: Read Data/List Directory, Write Data/Add File, Read Control Disposition: OpenIf Options: Sequential Access, Synchronous IO Non-Alert, No Compression Attributes: N ShareMode: None AllocationSize: 0 Any idea how to solve this? I noticed that the app folders e.g.: D:\Users\john\AppData\Local\Packages\microsoft.microsoftskydrive_8wekyb3d8bbwe had a different owner than the old profile folder had. Old profile folder had john as owner where my new profile folder had the Administrators group as owner. Changing this didn't help unfortunately.

    Read the article

  • Bash loop to move directories on a remote host via ssh

    - by I Forgot
    I'm trying to figure out a way to perform the following loop on a remote host via ssh. Basically it renames a series of directories to create a rotating backup. But it's local. I want it to work against directories on a remote host. while [ $n -gt 0 ]; do { src=$(($n-1)) dst=$n if [ -d /backup/$src ]; then { mv /backup/$src /backup/$dst; } fi; } ((n--)) done;

    Read the article

  • Move Ubuntu to another drive

    - by Ben Dilts
    I have a laptop with an 80GB SSD and 500GB HDD. I currently have Windows installed on the SSD, and a 400GB data partition for Windows on the HDD. I set aside 100GB on the HDD to try out Ubuntu, and I'd like to make it my primary OS and switch it over to the (much) faster SSD. How could I go about getting my Ubuntu setup moved over to the SSD? I have a 120GB USB hard drive I can use if necessary for getting through it.

    Read the article

  • www-data can upload a file but cant move it after the upload action

    - by user70058
    I am currently running Apache and PHP on Ubuntu. I have a page where a user is supposed to upload a profile image. The action on the backend is supposed to work like this: Upload file to user directory -- WORKS! Refer to the uploaded file and create a thumbnail in directory thumbs -- DOES NOT WORK www-data has write access to directory thumbs. My guess is that www-data for some reason does not have proper access to the file that was uploaded. UPLOADED FILE PERMISSIONS -rw-r--r-- 1 www-data www-data 47057 Feb 8 23:24 0181c6e0973eb19cb0d98521a6fe1d9e71cd6daa.jpg THUMBS DIRECTORY PERMISSIONS drwxr-sr-x 2 www-data www-data 4096 Feb 8 23:23 thumbs Im at lost here. I'm new to Ubuntu as well. Any help would be greatly appreciated!

    Read the article

  • winkey + arrow key doesn't move windows to 2nd monitor on linux

    - by Berry Tsakala
    in Windows, win+ <-- and win+ --> snap any window to the left/right side of a monitor, and if pressed again, snap the window to the other monitor, in multi-monitor environment. when a window is maximized, it will "restore" the window first, and at the next win+ <-- key the window will snap. this is very easy to use and remember. But on Linux a maximized window is not affected by win+ <-- , and the user must explicitly un-maximize it (win+down. the window is not moved to another monitor a side-snapped window cannot be resized - it behaves like a maximized window. is there another program that behaves like Windows, or I should write one by myself? (i'm using ubuntu/mint)

    Read the article

  • Windows 7 Public Documents Folder - how to move it to drive d:

    - by Bazza Formez
    Hi, I've just bought a new pc, and it is running Windows 7. I'm wanting to set up all of the documents folders such that they point to folders on a second drive partition (ie. disk D:) so that I have a nice separation of os from docs. I have managed to do this for each user on the machine (by opening up properties for documents folder and changing location). Hwoever, this procedure doesn't seem to work for the public documents folder. I cannot change the location for that one (even though I have administrator privileges). It is greyed out and cannot be changed. Any ideas ? Thanks!!

    Read the article

  • Unable to edit/delete/move /etc/my.cnf - Permission denied

    - by FlourishDNA
    I am trying to edit /etc/my.cnf as root user via ssh and I get following error while trying to save it I ma making changes to my.cnf as I want to tweak some values in my.cnf to meet Magento requirement like changing key_buffer_size= to higher value (128M). I assigned the value 128M to key_buffer_size= and tried to save it and then got an error. "Error writing /etc/my.cnf: Permission denied" I cant even restart MySQL successfully. [root@flourish ~]# service mysqld restart Stopping mysqld: [ OK ] MySQL Daemon failed to start. Starting mysqld: [FAILED] I can even delete or replace it with the fresh one. I tried uninstalling MySQL and re-installing but nothing worked. Permission -rw-r--r-- and Owner/Group root/root I hope there is some answer to this problem.

    Read the article

  • Move files from ftp server to s3

    - by lev
    I would like to set up an ftp server, where users will upload files, and for each file, put it on s3 storage, and delete it from the ftp server. (the server runs on ec2 ubuntu) Here are the stuff I already tried, with no success.. Mount s3 bucket using s3fs. I followed those instructions, but there is a bug in the latest version of s3fs, that prevents it from working. The bug was fixed on the develop branch, but I don't want to use unstable version on my production. Use vsftpd and using s3cmd sync via cron to sync the files periodically. The problem with that approach, is that s3cmd can start running in the middle of a file upload, and start synching the incomplete file. Also s3cmd doesn't give any feedback it the sync fails, so I have no way of knowing if I can delete the files after the sync command finished running. Use pure-ftpd's upload script feature (which allows to run a script after a file is finished uploading), but I noticed that if the file upload was failed in the middle, the script will run anyway, and I have no way of knowing if the upload was successful or not. I've been at it for a few days now, and I'm at a loss here. Any suggestions will be welcomed.

    Read the article

  • Dell D630 - Touchpad does not move the mouse cursor

    - by Dean McKenzie
    Windows XP - Dell D630 - Synaptics Touch Pad driver installed. The system tray icon that shows the movement of your finger on the touchpad registeres movement. The scroll feature of the touchpad works on any window with a scroll bar. The double click works even. But it never actually moves the cursor on the screen. An external mouse works with out problems, and I've replaced the palm-rest/touchpad and it continues to happen. The touch stick in the middle of the keyboard works without problems. Does anyone have any ideas?

    Read the article

  • Cisco PIX firewall blocking inbound Exchange email

    - by sumsaricum
    [Cisco PIX, SBS2003] I can telnet server port 25 from inside but not outside, hence all inbound email is blocked. (as an aside, inbox on iPhones do not list/update emails, but calendar works a charm) I'm inexperienced in Cisco PIX and looking for some assistance before mails start bouncing :/ interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname pixfirewall domain-name ciscopix.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 no fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 192.168.1.10 SERVER access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0 192.168.1.96 255.255.255.240 access-list outside_cryptomap_dyn_20 permit ip any 192.168.1.96 255.255.255.240 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq 3389 access-list outside_acl permit tcp any interface outside eq ftp access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq https access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq www access-list outside_acl permit tcp any interface outside eq 993 access-list outside_acl permit tcp any interface outside eq imap4 access-list outside_acl permit tcp any interface outside eq 465 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq smtp access-list outside_cryptomap_dyn_40 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANYVPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list COMPANY_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_60 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANY_VPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_80 permit ip any 192.168.1.96 255.255.255.240 pager lines 24 icmp permit host 217.157.xxx.xxx outside mtu outside 1500 mtu inside 1500 ip address outside 213.xxx.xxx.xxx 255.255.255.128 ip address inside 192.168.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm ip local pool VPN 192.168.1.100-192.168.1.110 pdm location 0.0.0.0 255.255.255.128 outside pdm location 0.0.0.0 255.255.255.0 inside pdm location 217.yyy.yyy.yyy 255.255.255.255 outside pdm location SERVER 255.255.255.255 inside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_outbound_nat0_acl nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx 3389 SERVER 3389 netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx smtp SERVER smtp netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx https SERVER https netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx www SERVER www netmask 255.255.255.255 0 0 static (inside,outside) tcp interface imap4 SERVER imap4 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 993 SERVER 993 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 465 SERVER 465 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface ftp SERVER ftp netmask 255.255.255.255 0 0 access-group outside_acl in interface outside route outside 0.0.0.0 0.0.0.0 213.zzz.zzz.zzz timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout sip-disconnect 0:02:00 sip-invite 0:03:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server RADIUS (inside) host SERVER *** timeout 10 aaa-server LOCAL protocol local http server enable http 217.yyy.yyy.yyy 255.255.255.255 outside http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 40 match address outside_cryptomap_dyn_40 crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 60 match address outside_cryptomap_dyn_60 crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 80 match address outside_cryptomap_dyn_80 crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map client authentication RADIUS LOCAL crypto map outside_map interface outside isakmp enable outside isakmp policy 20 authentication pre-share isakmp policy 20 encryption 3des isakmp policy 20 hash md5 isakmp policy 20 group 2 isakmp policy 20 lifetime 86400 telnet 217.yyy.yyy.yyy 255.255.255.255 outside telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 217.yyy.yyy.yyy 255.255.255.255 outside ssh 0.0.0.0 255.255.255.0 inside ssh timeout 5 management-access inside console timeout 0 dhcpd address 192.168.1.20-192.168.1.40 inside dhcpd dns SERVER 195.184.xxx.xxx dhcpd wins SERVER dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside dhcpd enable inside : end I have Kiwi SysLog running but could use some pointers in that regard to narrow down the torrent of log messages, if that helps?!

    Read the article

  • Firefox add-on to move the tab bar.

    - by D Connors
    Hi, I'm using Firefox on my netbook, and I want to save as many vertical pixels as possible without turning to full-screen mode. Right now, the only thing in my way is the fact that the tab bar can't be moved like the navigation bar or the bookmarks toolbar. I'm looking for a Firefox add-on that will let me place the tab bar side-by-side with the other bars. Is there anything like that? (the lighter the better)

    Read the article

  • Disable log rotation for apache or move file location

    - by vittocia
    I need to change the log retention for apache, currently is seems to be running on the default from logrotate.conf which is weekly. It creates 'access_log.1' 'access_log.2' and so on for each week. The problem is it deletes the last log file every week, 'access_log.5', I need the logs to keep going infinitely instead of the last log being deleted every week. It seems to be running on the default value from logrotate.conf - I don't want to change the default values held in that file, so I assume there is a way to change the retention using the /etc/logrotate.d/httpd file? the contents are as follows: /var/log/httpd/*log { missingok notifempty sharedscripts postrotate /sbin/service httpd reload > /dev/null 2>/dev/null || true endscript } what can I add/change to stop the last log being deleted every week?

    Read the article

  • How to move mail among Google Apps for Domains users

    - by Paul Roub
    Considering moving the domain used by my extended family for email to Google Apps. One less server for me to manage, better spam filtering, etc. One thing that's been nice about running my own has been the way I manage my kids' incoming email - it comes to me first, and I drop good mail in a symlinked IMAP folder that we share. A little procmail is all it takes, and straight-through exceptions are easy to implement. (FYI, no I'm not advocating censorship, but manually filtering spam and viruses from my 8-year-old's inbox seems like the right thing to do. YMMV) Anyway. I'm wondering if there's an easy way to do something similar in Google Apps - setting up filters to auto-redirect to me looks easy enough (any gotchas there?), but moving things back is not obvious. Yes, I could access both accounts via IMAP and drag mails across, but does anyone have an easier way?

    Read the article

  • How to move windows that open up offscreen?

    - by Matthew Scharley
    I have a dual monitor setup, and I recently played around with the positioning settings, and some of my single window applications do the favour of preserving where they were last closed, and opening in the same position later. Unfortuanately, that now places them out of the viewable area of my screens! Is there some way to force a particular window into the viewable area? If it matters at all, this is on Windows XP 32b.

    Read the article

  • Filtering ToDo List in Outlook 2010 with multiple Exchange accounts

    - by David LaRocque
    I'm trying to figure out how to get the ToDo list filtered for just one account? I've tried customizing the view, and using the advanced filter to get just one Oulook Data file, but once I do that the filter goes bonkers and I get all sorts of results! I know it's a combination of email flags and true tasks, and tried combining filters to pull those conditions together, and simply can't get it to cooperate. Before 2010, when the only way to get multiple mailboxes was to add additional mailboxes to the primary account, the task list pulled from just the primary account - but of course, the secondary accounts are not cached and available offline.

    Read the article

  • Proxy server on windows with SSL encrypted exchange with client

    - by Syffys
    I want to set up a classic proxy server (HTTPS, HTTPS, SSH, FTP, etc...) on a windows platform, but I need the following features: password authentication for clients data exchanged between clients and server to be SSL encrypted I've been trying to set this up various application to get this result, but without success so far: Squid for windows ccproxy wingate Alternatively, an other solution would be an HTTP SSL tunnel encapsulating an unencrypted proxy connection between clients and the server. I've spent a lot of time without any result so far, so I'm wondering if anyone faced this kind of issue. Thanks in advance!

    Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >