Search Results

Search found 2372 results on 95 pages for 'flashing the bios'.

Page 71/95 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

• Asus Z8NA-D6, not powering up/no signal for monitor

  - by s093294

  I have a Asus Z8NA-D6 motherboard. Been running fine so far with one E5504 Xeon processor. I have added another Xeon E5504 CPU to the second slot and it will not power up (or there is no signal to the monitor). The status lights turn on as normal. no error led. Nothing happens other then the leds start and both cpus/fans power up. HDD power up. I tried clearing CMOS. Any sugestions? http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6/#download Update. Removing ram for second cpu makes it boot atleast. itboots with memory pluged in for cpu 1. (2 4gb modules) when addin one more to the second cpu it still boots but bios only see the 2 blocks at cpu 1)

  Read the article

• Internal SATA hard disk shows up as removable device on Windows 7

  - by neutron80k

  I am running Windows 7 on an Acer Aspire M7720 with three internal SATA drives; drive #2 and #3 are on a removable HDD rack. Drive #3 (on the second removable HDD rack) shows up as removable device in the system tray. If I take drive #3 and put it in the first rack, it shows up as an internal drive. If I put any other drive in the second removable rack, that drive is also shown as removable device. I would like to fix that so that the drive in the second removable rack also is listed as internal drive. Since this seems to be independent of the actual drive in the rack, I checked the BIOS, but that third SATA port uses the same configuration as the second rack. So far, I could not find a solution for this problem (it's really more an annoyance than a problem), any ideas are welcome.

  Read the article

• BSOD / Reboot Cycling (possibly after windows update?)

  - by Mikey.B

  Windows XP SP3 Hi Guys, My desktop PC rebooted during the night (presumably due to an automated Windows update) and was stuck on a file system check. I forced a reboot as it had been stuck for hours and now the system won't finish booting. It shows the Windows XP splash screen, briefly flickers what looks to be a BSOD, and then reboots. So far, I've tried: Booting into all variations of safe mode (just hangs) Setting BIOS settings to fail-safe defaults (still reboots) Choosing the start-up option to load last known good configuration (still reboots) Any suggestions on how to proceed here? I haven't installed any recent software or hardware so I don't think this is a result of any explicit change I've made. -M

  Read the article

• Why Does My Laptop Freeze Up When Docked?

  - by Michael Haren

  I have a Dell Latitude D520. First with Windows XP and now with Windows 7, it completely freezes/locks up if I dock it while it's awake. If I hibernate/sleep, dock, then wake/resume, everything's fine. I installed the Dell Notebook System Software for Vista (No Win7 version available) and updated the bios to the latest version but the problem persists. As long as I remember to put this thing in standby before I dock it, it's extremely reliable--it survives my daily commute and heavy use and typically only reboots a few times a month. Any other ideas for things I can try?

  Read the article

• Question about getting information off an old HD...

  - by user37983

  Ok so my old cpu was a sony vaio. its kinda old and had xp on it. My gf thrashed it - the cd drive went and she tried fixing it by messing with the configurations bios etc. the actual laptop is really fried the keyboard doesnt work, etc. However the harddrive is still intact. I tried putting the HD in my new cpu (toshiba runnig win7) and it looks like its gonna boot up it goes to the screen with the logo and the status bar starts to load. then it flashes a blue screen for a split second, and goes to the black screen where it says windows did not shut down properly and gives options to (start windows normally, safe mode, safe mode with networking, safe mode with prompts) ive tried every option but it always goes back to this screen. I need to get into the hd cuz i have very important files. is there anyway?

  Read the article

• grub boot failed after upgrading to ubuntu 12.04 LTS

  - by user138021

  no such disk error occured. I tried to format and reinstall 12.04, the problem remained. I also repaired with boot-repair, the problem remained. http://paste.ubuntu.com/1224005/ is url of the details. server is dell R710, the bios is set to uefi and disk is raid0 gpt. I typed commands in grub rescue: ls (hd0, gpt2), `no such partition' is shown set, `prefix=((null),gpt2)/grub' is shown I don't know why /efi/ubuntu/grubx64.efi doesn't recognize disk. another strange thing is that there is only 1 file in /efi/ubuntu

  Read the article

• My laptop keeps hard resetting

  - by cgoddard

  I have had this laptop for a long time (five years at least) and it hasn't had the best treatment over the years. But over the last few months, it has been randomly completely shutting down, no blue screening, no steady shutdown, just black screen, then BIOS. I think it might be happening as I do a save, but cant be sure, but recently it has been getting very annoying. I did initially think it was an overheating issue, but the speed that it comes back online is staggeringly fast for it to have cooled down sufficiently. plus it has got incredibly hot before with no issue (since its been doing this). Does anyone know what might be going on? Dell Inspiron 640m, running Windows 7.

  Read the article

• USB port not working

  - by sharza

  Everytime I put pendrive in the USB port(all ports in my computer) it doesnt work especially when plug the USB Flash Drive, but after several hours it work again. But When I try to open this pen drive data on other computers, I'm able to open & work ... So definitely there is no problem with my pen drive. and I've enabled USB keyboard & mouse in Bios. I using windows xp and using USB 2.0 Please help ...

  Read the article

• Cloned Windows 7 to new HDD and want to change the drive letter to C

  - by Hoppe

  I used Clonezilla to clone my existing hard drive to a new one I bought. I then changed the BIOS to set the new drive as the first in the boot sequence. I'm pretty sure that I'm still running Windows 7 on the old drive. My old drive is marked as C. Now that I don't have a disk drive any more, how I do I swap the drive letter from J: to C:? I tried to change it in the disk management section of "Manage", but it reports: "the parameter is incorrect".

  Read the article

• Any way to disable specific CPU idle (Cx) states?

  - by Philippe

  I just got a new Toshiba Tecra S11 notebook, which has a Core i5 520M CPU, and it appears to suffer from a well-known problem: a high pitched noise when the CPU is idle. Googling around revealed that this is caused by a specific power-saving mode in the CPU. In most cases, C4 mode is blamed for the noise. So my question is: is it possible to disable C4 mode (or any other "sleep" mode) using some utility or BIOS setting? I don't mind if it hurts battery life. I'd appreciate any advice on this matter. It's driving me crazy. FYI: I'm running Windows 7 64-bit

  Read the article

• Windows 7 Hibernate Problem

  - by goygoycu

  I cannot hibernate windows. When I click "hibernate", my laptop(windows) just locks and the screen goes black. I can unlock without any problem. I do not have any problem with other options such as "sleep" or "shut down". I updated the chipset drivers but it did not help. There is not any option in BIOS about the sleep modes. "Hibernate" is "on" on Windows. Any advice? My Laptop specifications: MSI A5000 3gb system memory, Windows 7 Home Premium 32bit installed, Gentoo linux installed, Grub bootloader(MBR). Hard drive: Around 4gb of free space in windows partition.

  Read the article

• USB 3.0 Device not detected in Windows 8

  - by Tek

  About my setup: Windows 8 64-bit. X79-UD3 Motherboard. Latest Windows 8 USB 3.0 Drivers from motherboard manufacturer website. All right so device manager detects my USB 3.0 ports, so all is well there. However when I plug in my external USB 3.0 hard drive, windows doesn't even make a beep; the hard drive is not picked up by device manager at all. The SAME thing happens with Ubuntu 12.10 BUT adding PCI=nomsi (as a workaround) to the Grub command line of the Ubuntu boot option makes Ubuntu 12.10 detect my external hard drive. I also have a few other doubts, if you guys would be kind enough to answer them that include: Should XHCI hand-off in the UEFI bios be enabled or disabled for Windows 8? The difference between XHCI hand-off and EHCI hand-off and what are it's effects on USB 3.0 functionality? And last but not least how can I get Windows 8 to recognize my external hard drive when Ubuntu 12.10 (after the Grub workaround) works fine?

  Read the article

• Left click and enter not working

  - by user1981338

  Sometimes when I turn on my homemade desktop computer (running 64-bit Windows 7), the left mouse click and enter key doesn't work. They work well in BIOS, as well as on the Windows 7 BCD and login screen. Usually, restarting the computer solves the problem. Why does this keep happening? I've tried: Using other USB ports Refreshing, repairing and reinstalling drivers Changing mouse settings Refreshing mouse profiles My keyboard is a Logitech G510, and my mouse is a Razer Lanchesis 5600. Both work without problems in Ubuntu 12.04 and Windows 8.1 Preview, and I've been using both on my 64-bit Windows 7 homemade desktop without problems for about a year and a half. I encountered the problems yesterday.

  Read the article

• Booting drops to EFI shell but boots normally if exit'ed

  - by wittybear

  (first post here... I'm normally on stackoverflow) I'm booting an Intel ME 5788 board which uses EFI (a replacement for BIOS). On boot it drops out to the EFI Shell and the 'map' shows the drive as a blockdevice but there is no filesystem device mapped. If I just type 'exit' it boots normally to windows 7 and the configuration (using bcdedit.exe) looks fine. I'm confused - surely if its not been able to map the blockdevice as a filesystem device it should not boot? I would like to be able to get the boot to proceed without my interaction - does anyone know how to do it? (Also there is no Boot Manager options available in the shell, i.e. autoboot, bcfg etc)

  Read the article

• Why won't Windows XP 64 install on my machine?

  - by user272671

  I have a hp xw8200 workstation and would like to install Windowx XP 64 bit on it. Problem I seem to be having is when I reboot the machine and try to boot from the CD, nothing happens. Seems that the CD Drive is not being located or does not execute my cd to start the install. I already checked to verify that I can install Windows XP 64bit on my machine and also ensured I have the right bios and drivers for the install, only that the boot just does not take place. Anyone have any idea how I can solve this problem ? http://www.hp.com/workstations/pws/xw8200/xw8200.pdf http://h20331.www2.hp.com/Hpsub/cache/286710-0-0-225-121.html http://h20331.www2.hp.com/Hpsub/cache/286707-0-0-225-121.html thanks in advance

  Read the article

• "Missing operating system" even when booting from Linux Live CD: hardware problem?

  - by contextfree

  My parents' computer stopped booting from the HDD into Windows: it's showing a "Missing operating system" error. I tried burning a Live CD of the latest Ubuntu and booting from that, but it's giving me the same error. I know the Live CD works (I can boot my laptop from it). It does seem to be actually trying to boot from the CD (when I boot with the CD in it takes longer to get to the error message than if I boot with the CD out, or if I change the BIOS boot order to skip the CD drive; and the CD drive light is active during that time). Might this be a hardware problem? Are there common problems I can look for that might cause this?

  Read the article

• System restore with no mouse or keyboard.

  - by user62371

  I accidentally installed some USB drivers to my Windows 7 system, they were the wrong ones and now my keyboard and mouse won't work. A system restore would get rid of them, but obviously I can't control my computer to make that happen. Keyboard and mouse still work before windows has loaded, in the BIOS and boot system, so can I do anything from there? I've already tried booting into another OS, accessing my windows filesystem and deleting the Program Files entry, but it didnt work so they must go deeper than that. Or could i launch it from a remote machine? I've got some VNC server insalled so if i could get that running that could work.

  Read the article

• Western Digital Caviar SE16 not recognized

  - by NStorm

  Before I start, I have been looking at quite a few websites and I still have not found an answer to my problem. I have been building my own computer recently and I have just received the hard drive (WD Caviar SE16 WD5000AAKS) I was planning to put in my computer. After connecting the SATA power cable (99.99999% sure it is connected correctly) and the SATA cable to my motherboard (ASUS M5A78L-M/USB3) I booted my computer into a Linux Mint 13 XFCE 64-bit live USB expecting to see a hard drive when I came to install. Sadly when I checked the only hard drive that was showing was /dev/sda which was my USB with the Linux files on it. I also checked gparted and no hard drive other than my USB was showing up there either. Lastly I checked my BIOS and no matter what SATA port I connected the HDD to it wouldn't show up there either. Does anyone have any advice? Some images of my set-up which could help are bellow: Thanks in advance, Nick

  Read the article

• Check SSD stability before returning it as broken?

  - by data_jepp

  I have the Transcend SSD 720 256GB 2,5" 7mm disk. And randomly I get disk IO in utorrent and large files copying to external will fail. I have removed it from my laptop since I need max stability. I use my laptop on exams. How can I really bench/make-it-sweat whilst connected to my desktop? I want to re-create some of the fails as I need proof if I am to return it. Firmware is updated. BIOS on laptop is updated. I could just completely nul the disk and then check for bad sectors, but is there anything else I could use for testing? Edit: It has 7 bad sector replacement operations. What does it mean?

  Read the article

• Windows boot manager and two hard disks

  - by Pincopallino

  here's my situation: I had an HDD with Windows 8 installed (UEFI mode). I bought a SSD and wanted to do a clean install of Windows, so I thought that disabling the HDD and leaving the SSD as the only drive when installing was the right procedure to install the boot manager on the SSD. Unfortunately, after I plugged the HDD back in, the computer won't boot unless I select from the BIOS directly the SSD as the boot device. I guess the problem is that I have two Windows Boot Managers on two separate drives and they conflict. How would I solve this problem (excluding a format of the HDD, because I need to access data on the old Windows partition and, ideally, I would like to be able to boot that partition)?

  Read the article

• Why doesn't the Ubuntu Installer see all of my hard drives

  - by atodd

  I'm trying to setup a dual boot system with Windows Vista 64 (already installed) and Ubuntu 10.10. I added a new drive which is identical to the one Vista is installed on. When I boot into the LiveCD I can see and mount the second drive and edit it in Gparted. However, when I use the installer it will only bring up the drive that already has Vista installed. I've tried everything I know. I'm not sure if its a BIOS setting or something else I've missed.

  Read the article

• Why does my Microsoft Habu force me to unplug and replug in when booting up?

  - by jordsta

  I'm not too sure why, but every single time I boot my computer, I have to unplug and replug my semi-new Microsoft Habu, when I use Windows 7. Why does it do this? I've been through my BIOS, msconfig, and what-not.. It just seems to happen all the time. I've even looked in forums, with people resorting to changing their mouse because of the same issue.. It's stupid. Hopefully someone else can help... hopefully someone with experience with this mouse.

  Read the article

• Why is it possible to change the password of an admin user on linux?

  - by enum

  A few days ago, a friend of mine, wanted to show me that he can use my linux even if I don't tell him my password. He entered in GRUB, selected the recovery mode option. My first problem is that he already had access to my files (read only). He tried to do passwd but failed. Then he did some kind of remount (I guess that gave him write rights) and after that he was able to change my password. Why is this possible? I personally see it a security issue. Where I work there are several people that use linux and neither of them have a BIOS password set or some other kind of security wall.

  Read the article

• Debian - no sound output

  - by Gogeta70

  So I've been trying for the last few days to get sound output on my Linux desktop. The onboard audio is Intel HD Audio ICH9, but I couldn't get Alsa to even detect it, so I disabled it in BIOS and installed a PCI card - a Dynex DX-SC51. Searching around, I found that it needed the Alsa driver for ice1724, so I installed all the stuff for that. Now, the system detects my sound card, but I can't get any audio to play out of it. Here's some information: root@debian:~# lspci | grep audio 02:01.0 Multimedia audio controller: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller (rev 01) root@debian:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ICE1724 [ICEnsemble ICE1724], device 0: ICE1724 [ICE1724] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: ICE1724 [ICEnsemble ICE1724], device 1: ICE1724 IEC958 [ICE1724 IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 I've been trying various solutions found on Google for a few days now and I'm getting nowhere. Hopefully someone here can point me in the right direction. Thanks.

  Read the article

• USB 3.0 port with USB 3.0 device in Ubuntu 12.10

  - by fernando garcía

  When I try to connect a USB 3.0 device in Ubuntu 12.10 (ASUS K55VD, kernel 3.5.0-19-generic #30-Ubuntu SMP), the system says [ 74.747832] hub 3-0:1.0: unable to enumerate USB device on port 1 [ 74.931957] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 74.949390] usb 4-1: New USB device found, idVendor=05e3, idProduct=0731 [ 74.949396] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 74.949400] usb 4-1: Product: USB Storage [ 74.949403] usb 4-1: SerialNumber: 0000000000000033 [ 75.033327] usbcore: registered new interface driver uas [ 75.038548] Initializing USB Mass Storage driver... [ 75.038651] scsi7 : usb-storage 4-1:1.0 [ 75.038700] usbcore: registered new interface driver usb-storage [ 75.038701] USB Mass Storage support registered. but it does not recognize the device, and the disks applications (gparted, nautilus) act as if nothing had been connected. I have checked other questions, but either they have no answers or they told about previous Ubuntu version with 3.0.x kernels. A USB 2.0 device will work in the USB 3.0 ports. A USB 3.0 device will work (at USB 2.0 speeds) in the USB 2.0 ports. The problem, as I wrote, is between USB 3.0 devices and USB 3.0 ports. I have my USB 3.0 ports configured without legacy support via the BIOS (the way they should be, I suppose). But I also have tried to configure them with XHCI Preboot mode disabled. Have any one solved a similar problem? Thanks in advance.

  Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >