Search Results

Search found 2372 results on 95 pages for 'flashing the bios'.

Page 70/95 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• Installing Chrome OS on HP Pavilion

  - by Lenny K

  Trying to install Chrome OS on HP Pavillion tx1000. I changed the BIOS to boot from USB before hard drive, and created a bootable USB drive (SanDisk Cruzer 4GB). No matter how many ways I try to make the USB drive, the laptop hangs on the startup screen, and trying to open the Boot Order Options freezes on "Fixed disk 0: ...". On the other hand, without the USB plugged in, the computer continues, and displays "Initialized Mouse", and then onto the Boot Order Options. If you let it boot normally from the beginning, it starts up fine into Windows Vista. I am using Hexxeh's Chrome OS build. Here are the different methods I've tried for making the Bootable USB Drive: Hexxeh's Image Creator (for Mac) Making the USB device bootable (using these directions). I wrote the image using Win32DiskImager. Writing the image using Win32DiskImager (without making it bootable).

  Read the article

• Computer hangs on start-up, but re-start always works

  - by user10604

  I press the power switch; the fans start whirring; then precisely nothing happens. The monitor lights (I have two monitors) blink to indicate that they aren't receiving any signal - no BIOS splash screen, nothing. This scenario occurs about 80 percent of the time, the other 20 percent being normal starts. Noticing that the computer has not started properly, I press the power switch for four seconds to turn the computer off, and then I press it again to start the computer for the second time. It always starts normally the second time. Always. The power supply is a 750W from SilverStone. The motherboard is a Gigabyte P55A-UD3P. The video card is an Asus EN9800GT. There's 8 GB of RAM. I don't know what other information might be pertinent. Help!

  Read the article

• Intel HD 4000 and Nvidia GT 650 working together on laptop

  - by Juan

  My new win7 Acer notebook has i5 CPU with Intel HD 4000 and Nvida GT650 GPU. Obviously monitor is plugged to Intel HD. In Nvidia control panel I can configure PhysX but that doesn't help. Windows system rating shows high gaming experience and average/low windows aero experience. What does that mean? Does my laptop use nvidia for games/3d apps nad Intel HD 4000 for aero? Should I disable Intel HD in bios, but how to plug monitor to nvidia? Or should I leave everything like now because everything works as it suppose to work? Here is image capture of some states: http://oi47.tinypic.com/34p0qp4.jpg

  Read the article

• My hard disk does't get recognized

  - by SteveL

  For a few days now I have a problem with my 500GB internal hard disk. I am on Linux Mint 13 but I have the same problem with my Windows installation. When running fdisk -l I can see my hard disk (same on BIOS) but I can't mount it even via the disk utility program. In Windows XP I can see it on the My Computer menu but when I click it, it say's: D:\ is not accessible The file or directory is corrupted and unreadable Is there a way to fix it? Or at least save some of my files and format it? Should I be thinking about the worst-case scenario e.g. my HDD is dead? Edit: The filesystem is NTFS.

  Read the article

• How to install Windows on a laptop with no CDROM drive?

  - by Jason Kester

  I have an old Thinkpad X60 that I'd like to wipe clean and rebuild. Seeing as this machine doesn't have an optical drive, what's the easiest way of installing Windows XP? I have an external USB hard drive available. Would it be possible to run the install from that instead? Otherwise, what options do I have? Edit: assuming we're using a USB mass storage device... Is there a BIOS setting that I would need to change, or will it configure itself automatically? Would the USB drive need to be configured in any special manner, or would simply having a copy of the Windows CD files in a directory there be sufficient? Since the first couple answers that came in were basically "yes", I guess I didn't phrase my question correctly. I'm asking for detailed instructions on how to do this, not just a sanity check that I'm headed in the right direction. Thanks!

  Read the article

• Motherboard or Processor Problem

  - by bradlis7

  My computer is broken, but I'm having trouble narrowing down the issue. I replaced the power supply, because I assumed that was the issue, but it has the same problem. The issue started with my computer starting the fans and running, but it didn't get to the BIOS screen for about 10 seconds. Now it refuses to do anything when the power button is pressed, except when I turn off the machine and take the processor out for 10-20 seconds, then put it back in, I came hit the power button immediately, and the fans start for 1/2 second, and quit. Does this sound like a is a processor or motherboard issue? I removed all components, so I know that the issue is with one of these two things.

  Read the article

• Transferring to a SSD using Windows Explorer?

  - by Nick

  I've just bought a new SSD (regretting this already) which I want to make my primary hard drive on my new computer. It's a fresh Windows 8 install, so I'm wondering if I can just copy the entire contents of C: onto my new SSD drive, or will I need to copy other things too such as boot records? I don't have a CD drive unfortunately (I removed it to put in the SSD - it's a very small HTPC) and I don't have any USB stick to make a bootable copy of Clonezilla or similar. UPDATE: I have decided to re-install Windows 8 from scratch onto the SSD, the problem is obtaining the serial key that is embedded into the BIOS. I actually have a spare, unused product key from my desktop I'm writing on now, but I'd rather not use that when I already have a valid key in my new HTPC :( Thanks :)

  Read the article

• How can I make my laptop use a phone as a wi-fi adapter?

  - by Dennis Williamson

  I have an HP Pavilion dv6400 series laptop with an NVidea chipset which is the subject of a class action lawsuit. The symptom (PDF) that I'm experiencing is that the system fails to recognize that there is a wireless adapter installed. It doesn't appear in Device Manager. In this question, I ask if there's a way to work around this problem. As an alternative, I'd like to see if there's a way to use an old Windows Mobile 5 phone that does not have cellular service (voice or data) as a Wi-Fi adapter. How can this be accomplished? The system is running Windows Vista Home and has the latest BIOS (F42) and Windows updates and drivers.

  Read the article

• 64-bit Hardware Virtualization on VirtualBox

  - by Cat

  I am trying to set up a SQL Server practice lab using VirtualBox and a trial copy of Windows Server 2K8 R2 in ISO format. I received an error message that states my processor does not support 64-bit hardware virtualization. Although I "Enabled" Intel ardware virtualization in the BIOS that still doesn't work. According to the Intel website, the processor does support VT-x, however the accelerated tab in VirtualBox is greyed out and no references to VT-x are mentioned in the settings options available to me. Any ideas on how I can get around this? I checked around ServerFault and couldn't find anything but if I missed an applicable post a link is great too. Specs below - if additional information is needed please comment and I will provide. Thanks in advance. VirtualBox version - 4.1.18 Hardware - Lenovo B570 1068-A3U i3-2310M

  Read the article

• Uncorrectable machine check

  - by GregC

  I am experiencing rare but real unrecoverable machine checks on HP DL370 G6 dual-core Xeon server. I ran memtest86+ before, and ran CPU-intensive operations without any problems. In your opinion, does this indicate a real problem, or is it normal and expected behavior? How would you approach this problem? EDIT after some troubleshooting, it seems that these machine checks, as well as problems when showing device manager can be traced back to NC375i NICs. All is well when the NICs are not in the server. Further improvements to stability of HP Gen6 with Intel Xeon have been brought in with BIOS update in September 2013 HP Update DVD. Intel's newer microcode makes these CPUs much more stable. We haven't seen hardware-related BSODs since the update in September.

  Read the article

• computer reboots randomly, can't find ssd

  - by John Barry

  My comp's been restarting at random times, and when it comes back the SSD drive can't be found by the BIOS and it doesn't boot. Powering down and starting up again fixes it 90% of the time, with a second reboot occasionally required. Does not seem to be heat related; it's never happened with me actually on the computer. It has happened while acting as the squeezebox server, however. It's a Sandy-Bridge i7 arch if that helps. To add: I've also run Windows Memtest and it came back with no issues.

  Read the article

• HighPoint RAID Controller can't see drives

  - by Satellite

  I've just built a system with a HighPoint 2720 RAID controller. Everything appears to be OK, except that the controller doesn't see any of my drives - the RAID BIOS displays "ERROR. No Suitable disks". I have tried a WD SATA, Seagate SATA, and OCZ Vertex 3 SATA. I am using MiniSAS to 4x SATA breakout cables. How do I get this working? I've tried to sign up for HighPoint support, but their support site doesn't appear to be functioning correctly.

  Read the article

• Upgraded to a GTX 580 - no video signal on boot

  - by MGOwen

  I have: New Corsair 550w PSU (should be more than enough) AsRock H61M u3s3 mobo (with latest updated BIOS) Just replaced my faithful HD 7790 GPU with a refurbished EVGA GTX 580 1.5GB. When I boot, it sounds like the PC boots to windows, and the 580's fan is spinning, but I can't get any video signal from the card. Old card and integrated graphics still work fine (when I replace and use those instead). I am using the DVI ports on the card with a DVI-VGA adapter until I can get my hands on a mini HDMI adapter tomorrow. Anyone ever heard of a GPU needed something special to make the VGA signal work? Hold down a key on startup or something? I can't even find a manual for this card.

  Read the article

• TPM had to be reintialized: Does a new recovery password have to be uploaded to AD?

  - by MDMoore313

  Some way some how, a user's machine couldn't get read the bitlocker password off of the TPM chip, and I had to enter the recovery key (stored in AD) to get in. No big deal, but once in the machine, I tried to suspend bitlocker per recovery documentation, and got an error message about the TPM not being initialized. I knew the TPM was on and activated in the BIOS, but Windows still made me reinitialize the TPM chip, and in the process it created a new TPM owner password. I found that odd because it prompted me to save this password or print it (there wasn't an option not to), but it made no reference of a recovery password, nor did it back this password up to AD. After the user took her laptop and left I started thinking that if the TPM password change, does the recovery password change also? If so, that new recovery password will need to be uploaded to AD, but MS' documentation doesn't make that clear, and doesn't back up the new recovery key (if one exists) to AD automatically when the group policy says it must, and from a network standpoint AD is accessible.

  Read the article

• Converting ASUS Zenbook from Win8 to Win7.. do i need raid drivers?

  - by BrownChiLD

  I've got an ASUS ZEnBook Prime, ASUS Zenbook UX301LA-XH72T 13.3" Touch Ultrabook and it runs 500GB SDD on RAID 0 configuration. This notebook is running Windows 8, and i desperately need to convert to Windows 7, but maintain RAID 0 configuration. My question is, will i have problems maintaining RAID 0 once converted? I would assume that the RAID 0 configuration is BIOS based and WINDOWS wont even know it, and will only see 1 drive regardless... right? Or will i need to do some weird Windows stuff to maintain RAID 0 config? = which doesn't make sense to me why it would.

  Read the article

• Is there Linux Live USB that works with Snow Leopard macbook pro from 2010 april

  - by rofrol

  Hello, I was searching for a long time a Linux Live USB that I can boot my macbook pro from. Is there such distro so I can install it on Snow Leopard or Windows 7? UPDATE I've found this: "isohybrid" CD images (..) are special in that as well as the normal CD-based ISO9660 filesystem they also contain a valid-looking DOS-style partition table. Thus, if you simply copy one of these images raw to a USB stick a normal PC BIOS will boot the image directly. (...) Finally: I'd like to add support into xorriso for creating the nasty HFS hybrid images that are needed for booting Macs. The code that does this in cdrkit is probably some of the worst that I've ever worked with, and I'd like to get away from it. If only Apple hadn't stupidly built their proprietary platform around this shit and had used open standards instead Source

  Read the article

• Dell Precision 670 no booting

  - by fristson

  Our dell running xp did not boot one day and was making a beep code I had a hard time finding on the internet. It was one of the RAM sticks so i replaced it. Before that i removed the motherboard battery to see if there was a problem with the battery. Now at start up it tells me that No Logical Drives Found and then BIOS not installed!. I have read over alot of post here and other places but everyone is talking about installation of the OS. I just want it to start with what it had. Please help.

  Read the article

• Logitech USB keyboard driver not found on Windows 7 x64

  - by AngCaruso

  I have a Logitech Internet 350 Keyboard which has been working fine on my Lenovo T400 laptop for well over three years. Just within the past week or so, Windows 7 can no longer find the driver for it. There is no custom driver from Logitech for this device -- it uses the generic Windows USB HID driver. The keyboard works just fine from the BIOS (and Linux which I dual boot this machine), but Windows 7 cannot find or load the driver for it. Any ideas? I smell a Windows update problem, but have no idea how to fix it, and I really am not interested in rolling back updates. New Info: I just tested a generic Dell USB keyboard and it worked just find, with Windows immediately recognizing the device and installing the HID keyboard class driver. So, it seems that Windows has decided not to recognize my specific Logitech keyboard device. I still suspect a Windows update issue, but I would love to hear other suggestions.

  Read the article

• Memory works fine separately, but not together

  - by patersonjs

  I've been given four 1GB Corsair DDR2 memory modules, and am trying to fit them into my computer but am getting BSOD on Windows XP and errors in Memtest86+. I've tried to identify if one particular module is faulty by trying them in pairs. They work fine in pairs, but when all four are inserted, Memtest86+ reports errors. The motherboard is an Asus P5N-E with dual channel support and the modules are all the same model (same speed, capacity and timings) but one pair is a different hardware revision. One is v2.1 and the other is v2.2... the voltages are the same too. Would this minor difference be a possible cause of the problem? I've got the BIOS memory timing settings all at AUTO - should I manually set the timings?

  Read the article

• Why does Ubuntu 10.04 not see my hard drives?

  - by CT

  I am trying to install Ubuntu Desktop 10.04 64bit to a new machine. mobo = gigabyte x58a-ud3r cpu = i7 930 ssd = Kingston 64GB V+ hhd = wd 1tb black When the installation gets to the prepare partions step, no partitions are listed. Drives are recognized by BIOS and WinXP setup sees them. I have also tried Ubuntu 9.10. It does not see the drives also. Just searching around I found a suggestion to select "no dmraid" in additional options screen. This did not seem to help. Any ideas?

  Read the article

• Windows 7 System Image Restore to SSD - SSD not detected?

  - by steviey

  I recently bought a new SSD (OCZ Vertex 2 120GB) as a replacement for my laptop HDD . I created a System Image on an external drive using the Win 7 backup and restore tool and then restored this image to the SSD using the Win 7 disk. AHCI is enabled in Win 7 and the BIOS, but it seems that windows is not detecting the disk as an SSD because, in the defragger, the disk is still available for defragging. Prefetch and Superfetch were also still enabled. I have manually disabled scheduled defragging, prefetch and superfetch. I have also checked that TRIM is enabled using: fsutil behavior query DisableDeleteNotify and the result is '0' (it is). Performance seems ok, but not quite as fast as I expected. Was restoring from a win7 generated system image a mistake? Am I getting optimal SSD performance?

  Read the article

• What does it mean for a computer to be an "IBM Compatible PC"?

  - by Jon

  A couple questions about this: 1) Is this term even relevant any more? 2) Does this mean anything from a developer's stand point? It is not exactly clear to me if this is a BIOS, architecture, bus or a combination. A piece of software I'm working on expects to see a "Description" of the system and currently windows machines report "AT/AT Compatible". Having been tasked to port this to Mac, I really don't know what a proper "Description" would be - this will most likely be omitted but I was wondering if anyone could provide some insight on the modern usage of this term.

  Read the article

• ESXi onboard SATA passthrough [on hold]

  - by lodge93

  I am running ESXi 5.5 on a home system. When I attempt to pass one of the onboard SATA controllers (Intel ICH10R) to a VM, it is successful. However, the controller never appears in the VM. What else am I missing that would cause a VM to not recognize the controller? Additional Info: The controller is set to AHCI mode in the BIOS Prior to setting up the controller for passthrough, ESXi did recognize the controller and the drives I have tried with multiple VMs, none of which recognized the controller or the attached drives I have two onboard SATA controllers, on controller for ESXi and one for passthrough The final ideal state is that I could passthrough the controller to a FreeNAS VM

  Read the article

• Schedule power-on with ASUS P8H77-I?

  - by user826955

  Is it possible to have my box with an ASUS P8H77-I to automatically power on each sunday at 0:00 (for backup tasks)? I could not find such an option in the BIOS (or rather EFI). [edit] nevermind, I found it. Its called "RTC alarm date" or sth like this. Still I wonder if there was a possibility to wake the machine like every week on sunday? As it seems, I can only set either everyday, or a single day in the month. I would like to do weekly backups, but this would only allow me to do monthly backups.

  Read the article

• Asus Z8NA-D6, not powering up/no signal for monitor

  - by s093294

  I have a Asus Z8NA-D6 motherboard. Been running fine so far with one E5504 Xeon processor. I have added another Xeon E5504 CPU to the second slot and it will not power up (or there is no signal to the monitor). The status lights turn on as normal. no error led. Nothing happens other then the leds start and both cpus/fans power up. HDD power up. I tried clearing CMOS. Any sugestions? http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6/#download Update. Removing ram for second cpu makes it boot atleast. itboots with memory pluged in for cpu 1. (2 4gb modules) when addin one more to the second cpu it still boots but bios only see the 2 blocks at cpu 1)

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >