Search Results

Search found 19628 results on 786 pages for 'late static binding'.

Page 71/786 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

• Multiple public IPs through DD-WRT without 1-to-1 NAT

  - by Stephen Touset

  I've done a search here and wasn't able to find anything relevant to my situation. I apologize in advance if I've missed an existing post on the topic. Our ISP has provided us with 6 static IP addresses. We are currently using two of them (plus one for the Comcast-provided router). One of the static addresses routes to our internal network, and the other goes to our VOIP phone system. Unfortunately, the Comcast machine doesn't support QoS, so our VOIP calls have been choppy. We plan to put the Comcast-provided router into bridge mode and replace it with an ASUS RT-N16 running DD-WRT. However, I'm unsure how to set up DD-WRT to function similarly to our existing Comcast router. The Comcast router's WAN IP is the first of our static IP addresses. We did not need to provide an internal LAN IP address — simply connecting machines that use our other public addresses to the LAN ports on the Comcast router is enough for it to route between the connected machines and our internet connection. Is there a way to do a similar setup through the DD-WRT? Thanks in advance.

  Read the article

• Adding Static IP's to the NIC

  - by Brett Powell

  We are currently working on migrating a lot of new machines to our network, and my job this morning was to setup all of the IP Addresses. I worked on this all morning, and when I got back tonight I was informed that they had all been setup incorrectly, and had to be removed and re-added. I am quite confused as I have been setting up IP's on machines for a long time and I am curious as to what the issue is. Just taking into account this example... 72.26.196.160/29 255.255.255.248 A /29 block is 5 usable IP's. With the script I wrote and used, the IP Addresses .162 - .166 were added to the NIC. I can't remember now what the name for .161 was, but isn't it the broadcast address or something which isn't assigned to the NIC when adding additional IP Blocks? I am curious as to where my logic is failing me. Not to mention even if .161 was to be added, there is no reason why all of the IPs would have to be removed, as .161 could just be added in addition to these.

  Read the article

• Cisco ASA and static IPv6 tunnel endpoint?

  - by Martijn Heemels

  I recently installed a Cisco ASA 5505 firewall on the edge of our LAN. The setup is simple: Internet <-- ASA <-- LAN I would like provide the hosts in the LAN with IPv6 connectivity by setting up a 6in4 tunnel to SixXS. It would be nice to have the ASA as tunnel endpoint so it can firewall both IPv4 and IPv6 traffic. Unfortunately the ASA apparently can't create a tunnel itself, and can't port-forward protocol 41 traffic, so I believe I would have to do one of the following instead: Set up a host with it's own IP outside the firewall, and have that function as tunnel-endpoint. The ASA can then firewall and route the v6 subnet to the LAN. Set up a host inside the firewall that functions as endpoint, separated via vlan or whatever, and loop the traffic back into the ASA where it can be firewalled and routed. This seems contrived, but would allow me to use a VM instead of a physical machine as endpoint. Any other way? What would you suggest is the optimal way to set this up? P.S. I do have a spare public IP address available if needed, and can spin up another VM in our VMware infrastructure.

  Read the article

• Speaker static event fires with every action

  - by P.Brian.Mackey

  When I... click my mouse (everytime) stroke a key on keyboard (sometimes) Watch a video (horrible) Take the hard drive out for a walk (bad) The Cyber Acoustics CA-2014rb speakers chime in with an onomatopoeia. Sounds like radio interference. A click for every platter revolution. A chime for every 80Kb of data. This is a virus type Pokémon immune to formats, OS upgrades and everything but volume control, power outages and deep submersions. How can I defeat the monster rattling in my PC?

  Read the article

• Configuring Cisco ASA 5510 to assign static IP address based on MAC address [closed]

  - by knd

  Hi, We have a CISCO ASA 5510 at work. We want to configure the same such that it can serve specific IP addresses based on the MAC address of the clients. Any help would be greatly appreciated. Thanks in advance -knd

  Read the article

• I love google Chrome, but some non-static pages like Piwik render it unresponsive

  - by gogowitsch

  The web-stat software Piwik stops reacting on mouse clicks after 1-2 seconds. The same is true for Google Maps and Producteev (but GMail and most other pages work like a charm). These rely heavily on JS, and work without Flash. I can click for a very short time period and then the mouse cursor doesn't feel the UI anymore (it doesn't turn into a I over input fields, though it moves; if the freeze occured while the pointer was over an input field, the cursor keeps being a I) and all clicks on the DOM are being ignored by Chrome. No message appears, neither obvious nor in the Console (F12). There is no obstructing div or the like in the DOM (F12). Since I couldn't find any hints on the source of my problems, I suspected my plugins and extensions. Unfortunately, neither deactivating all plugins nor all extensions solved the problem. for the problematic pages, it always happens no Dropbox running several GB of free RAM the taskmanager doesn't show any high CPU or memory utilization (the offending tab uses 30 MB and uses 0-1 % CPU) all problematic pages work in other browsers (Chrome, Firefox, IE) the rest of the computer is very responsive the computers use different security suites (Kaspersky and Avira) The effect exists between several (synchronized) Chrome instances on different machines, all running Windows 7. Both the OS and Chrome are updated automatically. Other tabs and the Chrome chrome (tabs, menus, toolbar buttons of the browser itself) still work. I really don't like switching between browsers. Any ideas?

  Read the article

• Port binding conflicts with "switch user" on Windows 7

  - by C-dizzle

  We are using the switch user function within Windows 7 under an active directory network. We have one application in particular that gives us an error: Only one usage of each socket address (protocol/network address/port) is normally permitted. bind Port 10001 Are there any other ports that can only be used at one time that might have an adverse effect on the other user? We try to mentor our users to use the log off function instead of switch user, but that doesn't always happen. As an alternative, is it possible to disable the 'switch user' button on our machines?

  Read the article

• IPv6 static routes

  - by user98651

  I am looking to configure a few hosts with IPv6 on my network. The router (running CentOS 5) is configured with an Hurricane Electric (HE) tunnel which works fine on that host. However, I would like to statically add a few additional hosts on the same LAN to have IPv6 through this tunnel. No, I don't want radvd or dhcpv6 to do the work for me in this case. I already have IPv6 forwarding enabled in sysctl.conf. I am looking for help with the next steps (statically adding the routes). Lets say the IP addresses are as follows: Router: 2001:470:1b07:1:: Host1: 2001:470:1b07:2:: How would I go about making them see each other? Thanks in advance for the help.

  Read the article

• multiple ip for a server not reachable

  - by andrewk

  FYI: I've read everything on Serverfault related to this question and have faced a different issue. Simply put, I've got one server (apache2) with couple of sites on it. It currently has 1 ip. I'm trying to assign/add another ip to that server, so I can give each site a different ip for ssl purposes. I am not lucking out. The new ip simply is unreachable, I've pinged it. This is what I've got below, what am I doing wrong. auto lo iface lo inet loopback auto eth0 eth0:0 eth0:1 iface eth0 inet static address 70.116.5.244 netmask 255.255.255.0 gateway 70.116.5.1 #THE NEW IP iface eth0:0 inet static address 26.175.217.102 netmask 255.255.255.0 #PRIVATE IP iface eth0:1 inet static address 192.168.158.88 netmask 255.255.128.0 NOTE: THESE IP'S ARE TWEAKED BUT RELATIVE I've read many questions here 90% similar to this but most actually have the IP respond, not this case. Thanks netstar -r output Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default gw-u6.linode.co 0.0.0.0 UG 0 0 0 eth0 70.116.5.0 * 255.255.255.0 U 0 0 0 eth0 26.175.217.0 * 255.255.255.0 U 0 0 0 eth0 192.168.128.0 * 255.255.128.0 U 0 0 0 eth0

  Read the article

• Can not change to a static IP in Fedora 19

  - by user196272

  Im having a bit of a weird situation. Ive installed Fedora Linux 19 onto a virtual machine with no GUI. initially eth0 does not show up when I perform ifconfig. when I run dmesg | grep eth I see the adapter but it says it changed names to p2p1. Once I perform the ifconfig p2p1 up command it shows up. Now when I try to edit the /etc/sysconfig/network-scripts/ifcfg-p2p1, it does not exist. the only scripts that are there lo and enp0s3. If I try to create the ifcfg-p2p1 file with the correct settings, I can not restart the network service. I tried editing the enp0s3 file, but that did not work. Im fairly new to linux and not sure what else to put in here, so if you need any more information just let me know and Ill put it in here.

  Read the article

• Error with FTP since binding via httpcfg

  - by Linda

  I was in a similar posistion to this question and bound two IP addresses using httpcfg. Since doing this ftp does not seem to be working on IIS6 in Windows Server 2003. Any ideas what could be wrong? The command I ran was: httpcfg set iplisten -i xxx.xxx.x.x I get the following when I try to conenct via Filezilla: Error: Connection timed out Error: Failed to retrieve directory listing The log file is returning the following: #Software: Microsoft Internet Information Services 6.0 #Version: 1.0 #Date: 2009-08-17 13:54:05 #Fields: date time c-ip cs-username cs-method cs-uri-stem sc-status sc-win32-status 2009-08-17 13:54:05 91.85.70.17 Client [1]USER Client 331 0 2009-08-17 13:54:05 91.85.70.17 Client [1]PASS - 230 0 In the ftp site settings I have the site pointing to the IP address used using httpcfg and the port set to 21. Update: I can see a directory listing if I connect via the inbuilt commandline ftp client in wondows vista. If I try to connect via a windows explorer I start in the incorrect folder and no files are listed just directories.

  Read the article

• Prevent IIS7 HTTPS from binding to all SSL IP addresses

  - by robpaveza

  I've had this interesting problem with IIS7. I have a number of HTTPS sites in IIS7. That hasn't been a problem, until I wanted to go and set up VisualSVN Server using an SSL certificate. The installer had trouble starting the service. When I looked in the event log, the error was that "the file is already in use by another process." I figured that the "file" was really a socket, and checked with netstat - even though IIS was only bound to three specific IP addresses (.160, .156, and .168) with port 443, it was consuming *:443. I could stop the World Wide Web Publishing Service, start VisualSVN, and then start IIS, but then none of my SSL servers would start. Any helpful hints about how I could make IIS not try to default-bind to *:443? Thanks!!

  Read the article

• vSphere 5.5: Binding VMs to HBA cards on the host

  - by red888

  I am settings up a lab and wanted to be sure the following makes sense\is possible: One server running vsphere with two fiber HBAs 2 Windows 2012 Hyper-V VMs each bound to an HBA I'm using vsphere because it supports nested visualization, but I'm really setting up this lab to test out hyper-v and live migrations. Will I easily be able to bind each VM to a physical HBA on the host or are there any caveats I should know about?

  Read the article

• Problems during binding SpotLight to the instance

  - by Rodnower

  Hello, I have RAC Oracle11 installation built from 2 nodes running on Linux Red Hat OS. Now, I try to make connection from SpotLight running on Windows 7 to the Instance of one of nodes (TNS name of it is: LIBD1) This what I do: Make new connection - give user with SYS permission - connect - get error about that, that user not configured - User Configuration Wizard opens - give SYS as user with sysdba permissions (real SYS not other user with SYS permission) - check "configure new user" option - give new user name - next And I get error: DBMS_SQL access.denied. What I do wrong? Thank you for ahead.

  Read the article

• binding media keys to functions in vlc player

  - by Eknath Iyer

  How do I bind the media keys (play pause stop forward .. ) to corresponding functions in the vlc player. For now, I have to use the spacebar for play/pause and stuff like that. I'd prefer being able to vlc even when it is minimized!

  Read the article

• nginx: try_files not finding static files, falling back to PHP

  - by Wells Oliver

  Relevant configuration: location /myapp { root /home/me/myapp/www; try_files $uri $uri/ /myapp/index.php?url=$uri&$args; location ~ \.php { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include /etc/nginx/fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root/index.php; } } I absolutely have a file foo.html in /home/me/myapp/www but when I browse to /myapp/foo.html it is handled by PHP, the final fallback in the try_files list. Why is this happening?

  Read the article

• bind tmux prefix to OS X cmd key (or any other binding)

  - by rubenfonseca

  Hi all. I'm used to iTerm2 (or Terminal.app for this case) on OS X. But I want to move to use tmux (or screen, but the problem is similar to both apps). So my idea is to have a single iTerm tab with a tmux session opened with multiple tabs. To do the transition I have a basic feature I need to configure on tmux: switch the the tab 'n' by using cmd + n (like Firefox, Chrome, iTerm2 itself, etc) However I can't find a way of mapping the cmd key on the mac keyboard. I first tried to implement cmd as a prefix key, with no success. I've tried setting set-option -g prefix M-a (hoping for Meta-a) set-option -g prefix ^a (hoping for ^ to work) but nothing works. Is this possible? I don't really need to bind the prefix to cmd, but I want to be able to change tmux tabs with cmd+n. Thank you

  Read the article

• MAC to IP binding in ASA 5510 / SG 300-52

  - by Sampsa

  I am trying to configure a Cisco ASA 5510 to assign specific IP-addresses to specific MACs. Firmware on my ASA is 8.2(5). I have used this feature in our previous device (Cisco SA-520W). I have also read that this feature is (not yet) implemented. How do I work around this problem, if not by direct assignment? Do I need to specify fixed IP's on concerned devices themselves? I also have a SG 300-52 switch for our LAN. We cannot specify IP-addresses to ports, because we have further switches down the line. Thank you for your help!

  Read the article

• New Static Website with Hosted DNS alternating 502, 503 and Page Does Not Exist Errors

  - by Dave

  This has become an increasingly frustrating ordeal. I'm mostly a web developer, so forgive me if I am using improper terminology here. I have a client that had purchased a domain at JustHost. We built him a website and have it on our own server space. Now, I'm mostly used to dealing with godaddy and it is simple enough to manage dns records and point the A record to our server IP, where Apache on our end deals with the domains via name-based virtual hosts. But for some reason, in setting this up with JustHost, when attempting to go to the domain name, I either get a 502 or 503 error or "webpage does not exist". Now, I know that the basic functionality of the webpage must be working because I can access the the index etc straight through my servers www data (IE [server-ip]/website_folder). I was on the phone with technical support for over three hours yesterday with justhost and the best I could get was "That's really weird..." I've checked my logs and there doesn't seem to be anything coming through to my end. Does anybody have an idea of whats going on here? I would love for it to be a problem on my end, because justhost doesn't seem capable of helping further. Any help is greatly appreciated, thanks. I forgot to mention that we have several other sites up and running and completely accessible.

  Read the article

• Use Port Binding Permissions on Windows

  - by Sharon

  This should be an easy one, but I can't find anything on it. I want to use IIS Express with my local user account to bind to a port on my netbios name. For example, http://computername:1315. My local user account doesn't have permission to do this, but I have administrator access on the machine. Anyone know how to grant permission to my local user account to bind to a port with my computer name instead of localhost? This is on Windows 7.

  Read the article

• Caching static content from Adobe, Microsoft, etc

  - by Tim

  I'm currently running the Apple SUS on a Mac OS X Server in a small office environment. It works well for Apple updates, but I'm still stuck with either manually downloading and installing Adobe/Microsoft updates on each computer or running them through a Squid cache, with the blind faith that Squid will keep the files I actually want to stay cached. What is the best way to cache updates locally for applications like the Adobe Updater or Microsoft AutoUpdate? Ideally cached in such a way that I can tell which files I do or do not have cached. It would also be nice to be able to cache things for other software like Firefox and Sparkle-enabled apps, but these are usually small enough to ignore.

  Read the article

• Configure iptables with a bridge and static IPs

  - by Andrew Koester

  I have my server set up with several public IP addresses, with a network configuration as follows (with example IPs): eth0 \- br0 - 1.1.1.2 |- [VM 1's eth0] | |- 1.1.1.3 | \- 1.1.1.4 \- [VM 2's eth0] \- 1.1.1.5 My question is, how do I set up iptables with different rules for the actual physical server as well as the VMs? I don't mind having the VMs doing their own iptables, but I'd like br0 to have a different set of rules. Right now I can only let everything through, which is not the desired behavior (as br0 is exposed). Thanks!

  Read the article

• Wrap app with dynamic libraries into one large static app

  - by progo

  I have an old program that kind of depends on older dynamic libraries. They tend to get upgraded easily with distro's updates. I figured that there would be a script with using ldd that would gather the libs needed and create one bigger, statically linked application that wouldn't break so easily. If I could do this, alot of older KDE libraries could be removed from my system and easen my life. Thanks!

  Read the article

• 404 with serving static files in a custom nginx configuration

  - by code90

  In my nginx configuration, I have the following: location /admin/ { alias /usr/share/php/wtlib_4/apps/admin/; location ~* .*\.php$ { try_files $uri $uri/ @php_admin; } location ~* \.(js|css|png|jpg|jpeg|gif|ico|pdf|zip|rar|air)$ { expires 7d; access_log off; } } location ~ ^/admin/modules/([^/]+)(.*\.(html|js|json|css|png|jpg|jpeg|gif|ico|pdf|zip|rar|air))$ { alias /usr/share/php/wtlib_4/modules/$1/admin/$2; } location ~ ^/admin/modules/([^/]+)(.*)$ { try_files $uri @php_admin_modules; } location @php_admin { if ($fastcgi_script_name ~ /admin(/.*\.php)$) { set $valid_fastcgi_script_name $1; } fastcgi_pass $byr_pass; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/php/wtlib_4/apps/admin$valid_fastcgi_script_name; fastcgi_param REDIRECT_STATUS 200; include /etc/nginx/fastcgi_params; } location @php_admin_modules { if ($fastcgi_script_name ~ /admin/modules/([^/]+)(.*)$) { set $byr_module $1; set $byr_rest $2; } fastcgi_pass $byr_pass; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/php/wtlib_4/modules/$byr_module/admin$byr_rest; fastcgi_param REDIRECT_STATUS 200; include /etc/nginx/fastcgi_params; } Following is the requested url which ends up with "404": http://www.{domainname}.com/admin/modules/cms/styles/cms.css Following is the error log: [error] 19551#0: *28 open() "/usr/share/php/wtlib_4/apps/admin/modules/cms/styles/cms.css" failed (2: No such file or directory), client: xxx.xxx.xxx.xxx, server: {domainname}.com, request: "GET /admin/modules/cms/styles/cms.css HTTP/1.1", host: "www.{domainname}.com" Following urls works fine: http://www.{domainname}.com/admin/modules/store/?a=manage http://www.{domainname}.com/admin/modules/cms/?a=cms.load Can anyone see what the problem could be? Thanks. PS. I am trying to migrate existing sites from apache to nginx.

  Read the article

• Binding keys from specific device in X.org

  - by Michal Cihar

  I have a remote control for presentations, which generates Next/Prior key events in X.org (Page up/down). I'd like to use these for navigating in playlist (using MPD, but it probably does not matter). The problem is that I want to make this control work all the time (without application having focus) and I don't want to lose Page up/down functionality from normal keyboard. Is there some application which would allow me to bind actions to events from specific keyboard? Or is there simple way to implement such thing on my own?

  Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >