Search Results

Search found 14694 results on 588 pages for 'zend controller router'.

Page 71/588 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

• Lost WiFi after 12.10 upgrade

  - by Steven Guillory

  I received my new Dell Vostro 2420 last week, and just got around to upgrading from 11.10 to 12.10. Unfortunately, like many others (after researching the issue), I no longer have WiFi. I have tried every sudo command given that worked for others, and still can't get my wireless to function. I am new to Linux, so any and all help is appreciated. Thanks in advance! Edit: I can connect via ethernet, just not via wifi. As a matter of fact, when I use Fn + F2 to turn on wifi, only my bluetooth comes on. lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 07:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) This is what I am getting... dpkg: error: --install needs at least one package archive file argument Type dpkg --help for help about installing and deinstalling packages [*]; Use dselect or aptitude for user-friendly package management; Type dpkg -Dhelp for a list of dpkg debug flag values; Type dpkg --force-help for a list of forcing options; Type dpkg-deb --help for help about manipulating *.deb files; Options marked [*] produce a lot of output - pipe it through less or more !

  Read the article

• LIfebook lh531 inbuilt card reader not working

  - by chandrasekar

  Inbuilt card reader (SD/PRO/SDHC) not working. When I insert the memory card the indicator comes for a milli second and nothing happens. When I do lspci it gives the out put which is pasted below: I use Ubuntu 11.10. Pl help pro-hq@prohq-LIFEBOOK-LH531:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) pro-hq@prohq-LIFEBOOK-LH531:~$

  Read the article

• Can't install the wireless driver in HP Pavilion dv2419us

  - by maqtanim

  I've just installed Ubuntu 13.04 in an old HP Pavilion dv2419us. The problem is, Ubuntu doesn't detect the wireless card. But it works fine in Windows 7. The following command returns nothing! lspci -vvnn | grep 14e4 And the lspci output is: 00:00.1 RAM memory: NVIDIA Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: NVIDIA Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: NVIDIA Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: NVIDIA Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: NVIDIA Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: NVIDIA Corporation C51 [GeForce Go 6150] (rev a2) 00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: NVIDIA Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: NVIDIA Corporation MCP51 PMU (rev a3) 00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev f1) 00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev f1) 00:10.0 PCI bridge: NVIDIA Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 05:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 05:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 05:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 05:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) The command lspci -nn | grep 0280 gives no output. Any suggestion regarding this?

  Read the article

• Calling a model from a controller from the 404 route [migrated]

  - by IrishRob

  Got a problem here where I can’t seem to load a method from a model after the page has been redirected after encountering a 404. Model name: Category_Model Method name: get_category_menu() In my routes, I’ve updated the 404 over-ride to: $route[‘404_override’] = ‘whoops’; I’ve also got my controller Whoops that reads… <?php class Whoops extends CI_Controller { function index() { $this->load->model('Category_Model'); $data['Categories'] = $this->Category_Model->get_category_menu(); $data['main_content'] = $this->load->view('messages/whoops', null, true); $this->load->view('includes/template', $data); } } So when I navigate to a page that doesn’t exist, I get the following error… Message: Undefined property: Whoops::$Category_Model Filename: controllers/whoops.php I’ve hard coded the loading of the model into the controller here, even though I have it in my autoload, but no luck. Everything else with the site so far works, just this 404 problem. Any pointers would be great, kinda new to CI so go easy on me. Cheers.

  Read the article

• model association or controller?

  - by andybritton

  I'm trying to create a rails app that allows users to submit information about their pets. I've come to a point where my knowledge is limited and I don't know enough about what/how this could be done so I'm hoping this will be relatively easy to answer. At the moment I have a model called Pet, this model currently stores basic information like name, picture etc but it also holds more specific data like type, breed, date of birth etc. What I would like to be able to do is create a page that can match various records without having to be manually categorized if that makes sense so a users pet could be matched to other pets with the same breed, age etc. I've read about nested models as I understand this information could be submitted to 2 models in one form but I am not sure whether this could be done directly in a separate controller which would only be visible to users with pets in these matched "groups" if that makes sense. So in essence is it best practice to use 1 table to store all the information and just use a controller to match pets based on rows having the same values or would it be far simpler to have a form with a nested model and link 2 tables together? The main feature needs to be matching without a user having to create a group or categorize pets so the second model would need to add id's to an array instead of just creating more and more rows.

  Read the article

• What do you call a generalized (non-GUI-related) "Model-View-Controller" architecture?

  - by dcuccia

  I am currently refactoring code that coordinates multiple hardware components for data acquisition, and feeling a bit like I'm recreating the wheel. In particular, an MVC-like pattern seems to be emerging. Except, this has nothing to do with a GUI and I'm worried that I'm forcing this particular pattern where another might be more appropriate. Here's my scenario: Individual hardware "component" classes obey interface contracts for each hardware type. Previously, component instances were orchestrated by a single monolithic InstrumentController class, which relied heavily on configuration + branching logic for executing a specific acquisition sequence. After an iteration, I have a separate controller for each component, with these controllers all managed by a small InstrumentControllerBase (or its derivatives). The composite system will receive "input" either programmatically or via inter-hardware component triggering - in either case these interactions are routed to, and handled by, the appropriate controller. So, I have something that feels MVC-esque, but I don't know if that's because I'm forcing the point. With little direct MVC experience in application development, it's hard to know if I'm just trying to make my scenario fit MVC, where another pattern might be a good alternative or complimentary. My problem is, search results and wiki documentation of these family of patterns seems to immediately drop me into GUI-specific discussions. I understand "M means Model data and the V means View" - but do you call the superset pattern? Component-Commander-Controller? Whence can I exhume examples exemplary?

  Read the article

• Compiling Gearman extension for PHP on OS-X Snow Leopard with Zend Server Community Edition

  - by GrumpyCanuck

  I was wondering if anyone else has figured out how to solve this problem. Whether I install the extension via PECL or compile it by hand, I get the same error: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/local/zend/lib/php_extensions/gearman.so' - dlopen(/usr/local/zend/lib/php_extensions/gearman.so, 9): no suitable image found. Did find: /usr/local/zend/lib/php_extensions/gearman.so: mach-o, but wrong architecture in Unknown on line 0 I have no idea how to fix this problem and I can only bang my head into my desk so many times.

  Read the article

• Route Angular to New Controller after Login

  - by MizAkita

  I'm kind of stuck on how to route my angular app to a new controller after login. I have a simple app, that uses 'loginservice'... after logging in, it then routes to /home which has a different template from the index.html(login page). I want to use /home as the route that displays the partial views of my flightforms controllers. What is the best way to configure my routes so that after login, /home is the default and the routes are called into that particular templates view. Seems easy but I keep getting the /login page when i click on a link which is suppose to pass the partial view into the default.html template: var app= angular.module('myApp', ['ngRoute']); app.config(['$routeProvider', function($routeProvider) { $routeProvider.when('/login', { templateUrl: 'partials/login.html', controller: 'loginCtrl' }); $routeProvider.when('/home', { templateUrl: 'partials/default.html', controller: 'defaultCtrl' }); }]); flightforms.config(['$routeProvider', function($routeProvider){ //sub pages $routeProvider.when('/home', { templateUrl: 'partials/default.html', controller: 'defaultCtrl' }); $routeProvider.when('/status', { templateUrl: 'partials/subpages/home.html', controller: 'statusCtrl' }); $routeProvider.when('/observer-ao', { templateUrl: 'partials/subpages/aobsrv.html', controller: 'obsvaoCtrl' }); $routeProvider.when('/dispatch', { templateUrl: 'partials/subpages/disp.html', controller: 'dispatchCtrl' }); $routeProvider.when('/fieldmgr', { templateUrl: 'partials/subpages/fieldopmgr.html', controller: 'fieldmgrCtrl' }); $routeProvider.when('/obs-backoffice', { templateUrl: 'partials/subpages/obsbkoff.html', controller: 'obsbkoffCtrl' }); $routeProvider.when('/add-user', { templateUrl: 'partials/subpages/users.html', controller: 'userCtrl' }); $routeProvider.otherwise({ redirectTo: '/status' }); }]); app.run(function($rootScope, $location, loginService) { var routespermission=['/home']; //route that require login $rootScope.$on('$routeChangeStart', function(){ if( routespermission.indexOf($location.path()) !=-1) { var connected=loginService.islogged(); connected.then(function(msg) { if(!msg.data) $location.path('/login'); }); } }); }); and my controllers are simple. Here's a sample of what they look like: var flightformsControllers = angular.module('flightformsController', []); flightforms.controller('fieldmgrCtrl', ['$scope','$http','loginService', function($scope,loginService) { $scope.txt='You are logged in'; $scope.logout=function(){ loginService.logout(); } }]); Any ideas on how to get my partials to display in the /home default.html template would be appreciated.

  Read the article

• What's the different between Smarty and Zend?

  - by jpjp

  I came upon Smarty which is a template engine. But there is also the Zend, cakePHP frameworks. Is smarty like Zend? Or are they completely different? Because Smarty just separates logic from display which is similar to a framework like Zend?

  Read the article

• What's the difference between Smarty and Zend?

  - by jpjp

  I came upon Smarty which is a template engine. But there are also the Zend, CakePHP frameworks. Is Smarty like Zend, or are they completely different? Smarty just separates logic from display - is this similar to a framework like Zend?

  Read the article

• What are some of the best wireless routers for a price-conscious home power-user?

  - by Alain

  I'm extremely dissatisfied with the 'popular' choice for routers in homes and small offices. They are expensive (upwards of 60$), lack a great deal of useful configuration options, and seem to need to be restarted quite often. (Linksys comes to mind). I've been on the market for a good router lately, and slowly collecting a set of requirements I feel good routers should meet. Maximum number of TCP/IP connections. - This isn't something I see any routers advertise, but in terms of supporting torrent applications, I've been screwed by routers that support less than 20 here. From what I understand a fairly standard number is 200, but there are not so expensive routers that support thousands. Router configuration menu - Most have standard menu's that let you set up basic things like your wireless network encryption settings, uPnP, and maybe even DMZ (demilitarized zones). An absolute requirement for me, however, are routers with good enough firmware to support: Explicit Port forwarding Assigning static local ips to specific mac addresses, or at least Port forwarding by MAC address Port, IP and MAC filtering Dynamic DNS service for home users who want to set up a server but have a dynamic IP Traffic shaping (ideally) - giving priority to packets from certain machines or over certain ports. Strong wireless signal - If getting a reliable signal requires me to be so close to the router that I can connect an Ethernet cable, it's not good enough. As many Ethernet ports as possible. - Because I want to be able to switch from console gaming to PC gaming without visiting my router. So far, the best thing I've stumbled upon (in the bargain bin at staples) was a 20$ retail plus router. It was meant to be the cheapest alternative until I could find something better to purchase online, but I was actually blown away by the firmware capabilities. It supports defining reserved bandwidth for certain network traffic, dynamic DNS, reserving local IPs for specific MAC addresses, etc. At 2 am when my roommate is killing our Internet with their torrents, I can limit their bandwidth without outright blacklisting them. I have, however, met serious limitations when it comes to network traffic between local machines. It claims a 300Mbps connection, but I have trouble streaming videos from my PC to my console or other laptops wirelessly. It has a meltdown and needs to be reset once in a while (no more than a couple times a month), and it's got a 200 connection limit. There 4 Ethernet ports in the back but I'm pretty sure the first doesn't work. So some great answers to this question would be: Any metrics you use to compare routers, and requirements you have for new candidates. The best routers you've found for supporting home servers, file management systems, high volume torrent traffic, good price/feature ratio, etc. Good configuration advice (aside from 'use Ethernet whenever possible') Thanks for your feedback and experiences!

  Read the article

• Frequent and weird wifi disconnections

  - by Sidou

  How would you explain, troubleshoot (and solve) the following problem? Wifi ADSL modem router D-link 2640R installed in living room at about 1.8m height. Working fine, synchronising and getting/serving stable internet connection. First situation: -Laptop 01 in other end of the house, let's say in room01 southern to the living room, distant by about 15m. Getting stable signal of good to very good quality. No disconnection. -Laptop 02 in room02 opposite to room01 (5m West) which makes it almost at the same distance and direction from the router located 15m North. Getting stable signal of good to very good quality. No disconnection. Second situation: -Laptop 01 moved to room03 Northern to the living room (actually just 3m behind the wall where the router lies). Getting stable signal of excellent quality. No disconnection. -Laptop 02 still in room02 but now experiences frequent disconnections (actually almost impossible to get the Internet even though the signal level is still very good. Either no Internet with the wifi icon appearing connected to access point or no connection established at all which happens every 2 minutes and that means virtually no Internet at all as I can just get a timeframe of 1 minute or so to load any website or even get to the router's web based control panel. If Laptop 01 is completely shut down or its wifi adapters shut down or even still working but its wifi MAC address forbidden, then Laptop 02 has no problem at all. If Laptop 02 is moved to a nearer location to the router, in the living room for instance, then no connection problem occurs even if Laptop 01 is also connected. And also if we move back Laptop 01 to its original location (room 01), then no problem as well. I'm completely lost and don't know how to address this issue. I tried to change the Wifi channel and even tried the auto channel scan but that didn't solve it. I know that the problem is probably coming from Laptop 01 being in its new location or some sort of interference as the problem occurs only under the described condition but I have no idea how to solve it! I also scanned the neighborhood for wifi jam using InSSIDer, there are few other access points but they don't seem to affect the situation. Any ideas about the steps to follow or tools to use ?

  Read the article

• Why is Windows 7 not following all routes?

  - by GigabyteProductions

  My computer is connected to my secondary router that's running the 192.168.42.0/24 network and my computer also has a route that directs anything on that network to the router, but for anything on that network other than the router itself, it get's the ICMP response of Reply from 192.168.42.194: Destination host unreachable. (with 192.168.42.194 being my computer). Every other network works, like all of the internet, or addresses on my primary router like 192.168.1.*, just not on the 192.168.42.0/24 network... route print returns: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.42.1 192.168.42.194 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.42.0 255.255.255.0 On-link 192.168.42.194 276 192.168.42.194 255.255.255.255 On-link 192.168.42.194 276 192.168.42.255 255.255.255.255 On-link 192.168.42.194 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.42.194 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.42.194 276 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.42.1 Default =========================================================================== The only time anything is supposed to send an ICMP Host Unreachable response is when there's no route to it, right? So, why is my own computer sending that to ping or tracert when I have the route of 192.168.42.0 with the mask of 255.255.255.0? An IP address of 192.168.42.2 surely fits into that route. If I explicitly add a route for the IP address i am trying to access, it works, like: route add 192.168.42.2 mask 255.255.255.255 192.168.42.1 (the 192.168.42.1 right after mask is gateway, or the device to send the packet to so it can route it further), but why wont it work for the implicit route that's automatically on the table? I disabled my firewall, too (I use Comodo if anyone thinks this still serves as a problem). I'v even tried explicitly adding the gateway of 192.168.42.1 to the 192.168.42.0/24 route instead of it routing through 0.0.0.0's gateway, which is what On-link does. but that didn't work either, so it's not a gateway specification problem. If the host was really unreachable, it would be the router's IP address (192.168.42.1) sending that to me... This network is all of my creation, so there's no problem such as an administrator locking me out, because i am the administrator.

  Read the article

• Wireless not working on XP (with Intel® PRO/Wireless 2200BG Network Connection card and Zyxel router

  - by JohnIdol

  Hi all, I just got a new router, cant' get my old xp laptop (Toshiba Satellite) to connect to it, no matter if it's WPA-PSK or WEP (I was kind of thinking with WEP it would've worked but it doesn't). When I go connect and put in credentials the dialog stays up for a few minutes then disappears with no message and no connection is established. Here's the spec of router and wireless card: Wilreless card: Intel® PRO/Wireless 2200BG Network Connection Router: Zyxel P-660-HW-T1 v3 Everything works fine on my Vista machine (for once). Any help appreciated!

  Read the article

• Connecting Wii to router to Proxy Server via VPN to BBC iPlayer

  - by nkimber

  I live in the USA and want to be able to watch UK TV streamed over the web. The relevant services are geographically crippled. I can do this by using a VPN proxy server in the UK, connecting to the VPN service using a straight Windows VPN connection. However, this means I have to watch everything on my PC. The BBC iPlayer works on the Wii in the UK. So, I'd like to connect my Wii to a wireless router (LinkSys WRT54G2) and have that be automatically connected via VPN to my proxy service in the UK. If I can do this then I'd be able to stream UK TV direct to my TV via the Wii. I thought I could have one router act as my VPN connection, connected to a 2nd router that connects to my Cable internet access. But this bit isn't working, any thoughts?

  Read the article

• WRTU54G-TM T-Mobile@Home router with 3rd party firmware

  - by dlamblin

  I've been doing a lot of reading online about the Linksys WRTU54G-TM router model that I now own. It seems getting a custom firmware onto it is not a problem. But no one is talking about retaining the Voip features (yet). So far they're all disappointed that it's not a SIP machine and used GSM over IPSec. Personally I don't care about using it with non-t-mobile. If I take the original firmware, shouldn't I be able to extract it, and it's SquashFS image, and then move all of the t-mobile specific binaries for enabling the calling features over to a custom firmware installation (maybe OpenWRT)? You might ask why, and the reason is, that if I do this I could retain my calling features, which I do want, and ssh to the router and use it to run additional software, as any OpenWRT router could do. Does anyone know if this can be done, and how the firmware's binaries could be gotten at and installed correctly?

  Read the article

• Wireless clients have no route to ethernet clients in OpenWrt router

  - by superjoe30

  I'm using OpenWrt Kamikaze 8.09 on a Linksys WRT54g v1.1 router. I just flashed it with default settings and got everything working, except my wireless laptop cannot ping my desktop which is wired to the router. What can I do to fix this? (My desktop can ping other desktops wired to the router) My routing table: config 'defaults' option 'syn_flood' '1' option 'input' 'ACCEPT' option 'output' 'ACCEPT' option 'forward' 'REJECT' config 'zone' option 'name' 'lan' option 'input' 'ACCEPT' option 'output' 'ACCEPT' option 'forward' 'REJECT' config 'zone' option 'name' 'wan' option 'input' 'REJECT' option 'output' 'ACCEPT' option 'forward' 'REJECT' option 'masq' '1' config 'forwarding' option 'src' 'lan' option 'dest' 'wan' option 'mtu_fix' '1' config 'redirect' option 'src' 'wan' option '_name' 'ssh' option 'proto' 'tcp' option 'src_dport' '22' option 'dest_ip' '192.168.1.100' option 'dest_port' '22' config 'redirect' option 'src' 'wan' option '_name' 'http' option 'proto' 'tcp' option 'src_dport' '8888' option 'dest_ip' '192.168.1.100' option 'dest_port' '8888'

  Read the article

• Print server not being recognized after switching router and upgrading to 64 bit

  - by picardo

  I recently upgraded Windows 7 from 32 bit to 64 bit. I also switched my router from a very old model of Netgear to TP-Link. Before these updates, I had been using a USB print server by IOGear. After the updates, I took care to reinstall the drivers for both the print server and the printer, and picked the option to install a printer via TCP/IP, but no matter what I did, the driver software couldn't locate the print server on my network. I hit refresh, restarted my machine, turned off the firewalls and tried again. Still nothing. I'm at my wit's end. What else is left to try? Edit: More info. The print server is connected to the router via LAN line. The computer is connected to the router with a wireless connection.

  Read the article

• Using Static Public IPs and Private DHCP IPs on the Same Router

  - by Andrew Larsson

  I have a subnet of public IP addresses that my ISP has provided me with. They are routed through my router (how profound) that has a a static IP. I have successfully assigned the IPs from that subnet to various devices on my network. This works just fine, they get their own public IP, they can access the Internet, and the Internet can access them. However, I would like to also assign some private IPs on my network through that same router and put them behind NAT. Is this even possible? Could a VLAN be of use? I would like to avoid putting another router on the network, which makes this is quite an awkward question.

  Read the article

• Problem with VPN using 2 Wire Router with a Linksys Router.

  - by Hiram Hubbard

  I am having a problem with a VPN between a 2 Wire router and a Linksys router. 2 wire is the client PC using Linksys Quick VPN software and Linksys RVS4000 is the server. The PC is not the issue. It works on a different network not using 2 wire. Also the Linksys RVS4000 is not the issue, 3 other user can VPN to it with no problem not using 2 Wire. The problem is with 2 Wire. The client PC is getting this error: "The remote gateway is not responding" What configuration changes are needed on the 2 Wire router (port, UPNP, etc...) and what changes are needed if any on the Linksys RVS4000? Thanks.

  Read the article

• Advantages / disadvantages of having DynDNS access on a computer vs the router

  - by Margaret

  I have a shiny new toy, a Cisco Wireless-N Gigabit Security Router with VPN (WRVS4400N). While looking through the instruction manual, I discovered that it had support for DynDNS built-in. We've currently got the DynDNS client running on one of the servers (that people SSH to, as documented in this question); but the reason for the router update is to move away from SSH to VPN. To that end, is there any difference in behaviour/functionality/maintainability to run it off the computer, as opposed to the router? Thus far, DynDNS has more or less a set-and-forget setup, but since the feature was there, I wanted to know if it was a better location for the process...

  Read the article

• Using ADSL Modem/WiFi Router to share existing network wirelessly

  - by joshhunt

  At my uni we have a wired Ethernet connection in our dorms. However, I want to share this connection with my macbook using wifi (so I don't have to be constantly tethered). I am looking at using my DSL G064T ADSL modem/WiFi router as a wifi repeater for the uni network. Is this possible? How would I go about doing this? I understand that it would be possible using a normal Wifi router (seeing as it has an ethernet 'in' port where it would get the external connection from.), so is it just not possible using the router I have? If i need to buy another one, which one would you recommend?

  Read the article

• LinkSys router suddenly cannot get an IP address

  - by user43208

  I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

  Read the article

• router cannot get ip address

  - by user43208

  Hi guys, I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

  Read the article

• Can't connect Alienware M11x wireless to internet thru families router

  - by Jim Kron

  Morning All, Have an Alienware M11x loaded with Win 7 Premium with the Dell half card wifi. Also have a Netgear and Belkin USB external adapters (b/g and N to include dual radios. No joy either. Families Internet is served thru Charter and they use a Motorola Router. No matter if we reset the router, I cannot connect to the Net but can talk to the router. BTW... my brother only uses WEP as a number of connected items are old and my folks are not in a high threat area for attacks. Frustrated, as I know what I'm doing but this really has me stumped. Any thoughts? Much appreciated, Jim

  Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >