Search Results

Search found 91930 results on 3678 pages for 'svn user'.

Page 710/3678 | < Previous Page | 706 707 708 709 710 711 712 713 714 715 716 717  | Next Page >

• Triple monitor setup in linux

  - by Brendan Abel

  I'm hoping there are some xorg gurus out there. I'm trying to get a three monitor setup working in linux. I have 2 lcd monitors and a tv, all different resolutions. I'm using 2 video cards; a 9800 GTX and 7900Gt. I've seen a lot of different posts about people trying to make this work, and in every case, they either gave up, or Xinerama magically solved all their problems. Basically, my main problem is that I cannot get Xinerama to work. Every time I turn it on in the options, my machine gets stuck in a neverending boot cycle. If I disable Xinerama, I just have three Xorg screens, but I can't drag windows from one to the other. I can get the 2 lcds on Twinview, and the tv on a separate Xorg screen no problem. But I don't really like this solution. I'd rather have them all on separate screens and stitch them together with Xinerama. Has anyone done this? Here's my xorg.conf for reference. p.s. This took me all of 30 seconds to set up in Windows XP! p.s.s. I've seen somewhere that maybe randr can solve my problems? But I'm not quite sure how? Section "Monitor" Identifier "Main1" VendorName "Acer" ModelName "H233H" HorizSync 40-70 VertRefresh 60 Option "dpms" EndSection #Section "Monitor" # Identifier "Main2" # VendorName "Acer" # ModelName "AL2216W" # HorizSync 40-70 # VertRefresh 60 # Option "dpms" #EndSection Section "Monitor" Identifier "Projector" VendorName "BenQ" ModelName "W500" HorizSync 44.955-45 VertRefresh 59.94-60 Option "dpms" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nvidia" BusID "PCI:5:0:0" BoardName "nVidia Corporation G92 [GeForce 9800 GTX+]" Option "ConnectedMonitor" "DFP,DFP" Option "NvAGP" "0" Option "NoLogo" "True" #Option "TVStandard" "HD720p" EndSection Section "Device" Identifier "Card2" Driver "nvidia" VendorName "nvidia" BusID "PCI:4:0:0" BoardName "nVidia Corporation G71 [GeForce 7900 GT/GTO]" Option "NvAGP" "0" Option "NoLogo" "True" Option "TVStandard" "HD720p" EndSection Section "Module" Load "glx" EndSection Section "Screen" Identifier "ScreenMain-0" Device "Card1-0" Monitor "Main1" DefaultDepth 24 Option "Twinview" Option "TwinViewOrientation" "RightOf" Option "MetaModes" "DFP-0: 1920x1080; DFP-1: 1680x1050" Option "HorizSync" "DFP-0: 40-70; DFP-1: 40-70" Option "VertRefresh" "DFP-0: 60; DFP-1: 60" #SubSection "Display" # Depth 24 # Virtual 4880 1080 #EndSubSection EndSection Section "Screen" Identifier "ScreenProjector" Device "Card2" Monitor "Projector" DefaultDepth 24 Option "MetaModes" "TV-0: 1280x720" Option "HorizSync" "TV-0: 44.955-45" Option "VertRefresh" "TV-0: 59.94-60" EndSection Section "ServerLayout" Identifier "BothTwinView" Screen "ScreenMain-0" Screen "ScreenProjector" LeftOf "ScreenMain-0" #Option "Xinerama" "on" # most important option let you window expand to three monitors EndSection

  Read the article

• Copy-paste stops working on Windows 7

  - by earlyadopter

  Copy-paste functionality stops working after about an hour after each reboot on a Windows 7 64-bit system. Running Google Chrome (with gmail and few other tabs open like Calendar, Reader), MS Outlook (which I don't think has anything to do with the problem — I saw it when outlook was off as well), iTunes (9.1.1.12 if it matters). Would appreciate hints where and what for to look in a registry, and ideas for possible fix. That is not an Internet Explorer problem (I don't even run it) — it happens in all applications. Neither Ctrl-C/Ctrl-V nor context menu right-click Copy-Paste (actually, nothing happens on Copy, so there is nothing in a clipboard to Paste) are working. Drag-and-Drop (where supported) continues working though.

  Read the article

• Generating a record of the full(-ish) package management state

  - by intuited

  I'm about to make some system changes and I'd like to have a record of my current happy system state. Is there a convenient way to create a record of this? I'd like to keep track of info like currently installed packages and their versions which packages are pinned at what version which source (as in /etc/apt/sources.list) they were installed from whether they were installed directly or automatically installed as a dependency of a different package "unknown unknowns": ie stuff that I don't know that I should be keeping track of but which may be important when trying to figure out why something doesn't work In short, I'd like to keep as much of the aptitude database as possible. What's the best way to do this? It would be nice if the resulting records were easily readable, though this is not really essential. It would be extra nice if it were readily versionable through an SCM tool like git. There is a superuser question that partially answers this, but it only provides the list of currently installed packages.

  Read the article

• Mac OSX Mountain Lion Rails Postgres (wiped out a lot of stuff)

  - by kurtybot

  Having trouble with Postgres since I upgraded to Mountain Lion (and now regretting it). Lost hours trying to fix it to no avail. When running rails server then visiting my app at 0.0.0.0:3000 I get this error. psql: could not connect to server: No such file or directory. Is the server running locally and accepting connections on Unix domain socket "/var/pgsql_socket/.s.PGSQL.5432"? tried updating xcode.

  Read the article

• iTunes: Burn an MP3 CD when I only have AAC files?

  - by Phillip Oldham

  Is there a way to burn an MP3 CD when iTunes only contains (unprotected) AAC files purchased from the iTunes store? There isn't an option directly in iTunes to convert AAC - MP3 like there is for MP3 - AAC, and having to convert the AAC files to MP3 and use an extrnal tool to burn the disk would be time-consuming. Are there any plugins for iTunes that can accomplish this? Or programs which can read an iTunes playlist, convert the tracks to MP3 "on the fly" while burning the CD?

  Read the article

• No sound (USB speakers) in Ubuntu 9.04 Jaunty Jackalope

  - by Mike

  I just installed Ubuntu 9.04 and have been unable to get sound functioning. I have a set of USB speakers (not USB powered with a stereo plug... they are totally USB). I've tried plugging them directly into the tower as well as into the USB port on my Dell 2405FPW monitor. Both USB ports are functioning correctly (I tested by sticking a flash drive in there - they both read it), and the speakers are functioning correctly in Windows. If it's relevant, I have an SB Audigy 2 sound card that came with the computer, but is not being used. Any ideas? Thanks! EDIT: These are the speakers - Logitech S-150 USB Speakers

  Read the article

• RSS Comment Feeds from SharePoint 2007 Blog

  - by mjlefevre

  Is there any way to subscribe to RSS comment feeds from a SharePoint 2007 blog? Or to include comments in the standard RSS feed? Some easy way to be notified or new comments to a thread via RSS?

  Read the article

• Sql Server Management Studio: Change Prefix or Suffix characters

  - by PhantomDrummer

  I have an instance of SSMS 2008, for which the option to edit data in a table doesn't work. If I right-click on any table in the Object Explorer and select 'Edit top 200 rows' I get an error dialog 'Invalid prefix or suffix characters. (MS Visual Database Tools)'. The error seems to be associated specifically with SSMS, not with SQL Server (because this SSMS instance gives the same error no matter what database I connect to, but I've verified I can connect to some of the same databases using SSMS on other machines without the error). (However, our firewall prevents me using SSMS on other machines for some crucial tasks, so I do need to fix the problem). Googling for the error suggests that I should change the prefix, suffix or escape character, but without any indication of how you can make that change in SSMS. I'd also note that I'm not aware of having done any customization on SSMS since installing it, so would be surprised at having to make such a change now. Does anyone have any idea what the error message means or what I can do about it? Or how I can change the prefix/suffix/escape characters if that is really the problem.

  Read the article

• Setting the view of the toolbar to Large icons creates a gap in the Windows 7's taskbar

  - by Boris

  If you add a custom toolbar in the Windows 7 taksbar and set the toolbar view to Large Icons (and the icons in the toolbar are not set to Use small icons), the height of the taskbar unexpectedly increases by around 5 pixels, which makes a rather stupid gap at the bottom of the screen. If the option Use small icons is used for the taskbar appearance, the height of the taskbar is normal. It appears that the programmers at Microsoft were not very meticulous while designing the Windows 7 UI; it is obviously a bug. I was wondering if there is a registry hack to fix this or if anyone knows any solution to the problem, except for the obvious one: "use the small icons"? Thanks.

  Read the article

• Accessing network shares on Windows7 via SonicWall VPN client

  - by Jack Lloyd

  I'm running Windows7 x64 (fully patched) and the SonicWall 4.2.6.0305 client (64-bit, claims to support Windows7). I can login to the VPN and access network resources (eg SSH to a machine that lives behind the VPN). However I cannot seem to be able to access shared filesystems. Windows is refusing to do discovery on the VPN network. I suspect part of the problem is Windows persistently considers the VPN connection to be a 'public network'. Normally, you can open the network and sharing center and modify this setting, however it does not give me a choice for the VPN. So I did the expedient thing and turned on file sharing for public networks. I also disabled the Windows firewall for good measure. Still no luck. I can access the server directly by putting \\192.168.1.240 in the taskbar, which brings up the list of shares on the server. However, trying to open any of the shares simply tells me "Windows cannot access \\192.168.1.240\share You do not have permission to access ..."; it never asks for a domain password. I also tried Windows7 native VPN functionality - it couldn't successfully connect to the VPN at all. I suspect this is because SonicWall is using some obnoxious special/undocumented authentication system; I had similar problems trying to connect on Linux with the normal IPsec tools there. What magical invocation or control panel option am I missing that will let this work? Are there any reasonable debugging strategies? I'm feeling quite frustrated at Windows tendency to not give me much useful information that might let me understand what it is trying to do and what is going wrong.

  Read the article

• Why do GPUs overheat?

  - by JAD

  About a year ago, I added a 9800GT (1 GB version) and a Corsair CX500 PSU to an HP M8000N computer. A few weeks ago, the HDD overheated and I decided to transfer the GPU & PSU to a new build, which consists of: i3 @ 3.3Ghz Gigabyte H61 Micro ATX Mobo 4GB RAM 500GB WD HDD DVD RW Drive Cooler Master Elite 430 Tower Once I had Win7 up and running, I installed all the essential drivers that came with the Gigabyte Mobo CD. However, whenever I tried installing the Graphics Media Accelerator driver, the computer would crash and enter an endless boot sequence on the next startup. I skipped installing this driver and installed the CD driver for the 9800GT, which by now is a year old. Everything was working fine, WEI rated my GPU at 6.6 graphics & aero performance. However, after updating my Nvidia drivers to the latest, the WEI dropped my rating to 3.3 for Aero, and 4.7 for graphics performance. Just to make sure that everything was ok, I ran Bad Company 2 on medium settings. The first few minutes ran just fine at a smooth framerate, so I dismissed this as Windows being Windows. About 6 hours later, I ran BC2 again. This time I averaged anywhere from 2-5 FPS. I checked the GPU temperature through GPU-Z, and it came back as 120C. The problem with this, is that the computer was on for six hours up to that point. Wouldn't the card have experienced a reactor core meltdown a lot sooner than that? Granted, the computer was "sleeping" some of the time, but still... The next day I took out a temperature gun and ran some tests. I would point the laser at a very specific area on the reverse side of the card (not the fan or "front"), and compare the temp reading with GPU-Z. After leaving the system on idle on idle for a few minutes, I ran BC2 twice. Here are the results: GPU-Z Reading / Temp Gun Reading / Time Null / 22.3°C / Comp is Off 53°C / 33.5°C / 1:49 78°C / 46°C / 1:53 - (First BC2 run; good framerate) 102°C / 64.6°C / 2:01 - (System is again on idle) 113°C / 64.8°C / 2:10 119°C / 71.8°C / 2:17 - (Second BC2 run; poor framerate) I should also mention that I also took a temp recording of another part of the GPU from 2:01-2:17. The temp in this area jumped from 75°C to 82.9°C in that time frame. This pretty much confirms that GPU-Z is reporting the temperature accurately, and the card is overheating. But I'd like to know why; the cars is doing nothing and still the temperature climbs at a steady rate. I thoroughly cleaned the GPU and PSU when I salvaged them from the old HP M8000N computer with a can of compressed air, dust cant be the issue. Similarly, the rest of the computer is brand new. I installed various Nvidia drivers, but no luck. It seems strange to me that a year-old card is suddenly failing on me; aren't they supposed to last at least two years? Could this be a driver issue? Is the motherboard faulty? Could the PSU be overfeeding the card on voltage? Neither case seems likely, as the CPU, RAM and otherwise the rest of the comp has worked flawlessly and has stayed well within respectable temp ranges (the i3 lingers around 50C, the HDD stays at 30C, so does the PSU). How can I pinpoint the issue?

  Read the article

• convert mp4 to flv. Adobe Medio Encoder Failing.

  - by Derek Adair

  Hi, I am trying to encode a .mp4 to a .flv I've tried using the Adobe Media Encoder but the video is lost in the conversion process, leaving me a black screen and some audio. I have yet to find something that can do this successfully for free. I found ffmpeg, which looks promising... but I can't figure out how to get it to work. Any direction would be greatly appreciated. -Thanks.

  Read the article

• How to Make Flash Builder Package Explorer emulate Flex Builder’s Navigator window?

  - by eco_bach

  Hi Does anyone know if there is a way to make the new Package Explorer window in Flash Builder emulate Flex Builders 'Flex navigator' window? Bottom line is I don't always need to peer into SWC's, and I don't like having a 'default package' automatically created for me. Not sure why the interface wasn't made simpler, allowing access to more power and complexity only if necessary. I want to focus on the code, not on how to navigate and use the bells and whistles in the coding environment.

  Read the article

• Drobo FS vs. MacBook Pro: Finder works, Drobo Dashboard doesn't

  - by dash-tom-bang

  Does anyone have any experience with the new Drobo FS, specifically using it from a MacBook Pro? My experience thus far is this: Set up the Drobo Dashboard software (hereinafter called simply 'Dashboard') on my WinXP machine, which is hard-wired to the network to do the data migration from my NAS-that's-being-replaced (a 250G SimpleShare which works well enough but I was always afraid of losing the one disk). The Dashboard seems to work ok, except that the DroboCopy function doesn't work at all. This is the backup solution, which I can configure, and if I launch it (e.g. to back up from the old NAS to the Drobo) it spins the NAS, seeking the drive all over hell and creation, until finally giving up an hour+ later with zero files copied. Selecting only a subset of the data yields the same effect albeit more quickly. On my Mac I installed the Dashboard software too, since most of my fiddling with the device will be from my couch in the living room. Finder connects to the box just fine, fwiw, but Dashboard just sits there, "waiting for connection." This is considerably more bothersome than the above paragraph, but I figured I'd give whatever information I have. Drobo is insisting that I send them this "Debug Log" file that their software generates. Does anyone know what's in it? It's encrypted and they won't tell me, which spooks me just a bit; not like I'm terribly concerned about privacy but I don't want to be sending personal information out to every clown who says they "need" it in order to help me. thanks a ton, -tom!

  Read the article

• Minidump folder cannot be found

  - by Saxtus

  Although I have enabled the creation of minidump files in my system, it appears that either Windows doesn't create them where the Startup and recovery dialog points to (%SystemRoot%\Minidump) or at least I can't find them. Even the Minidump folder under Windows directory is missing and I had numerous BSODs till now. I've searched all my HDs for mini*.dmp files only to find some old ones in a backup folder from my Vista x86 installation, before I install Windows 7 x64. Any thoughts of why this is happening and how to fix it? Pre-thanx!

  Read the article

• Organize mail with Evolution & Gmail IMAP

  - by Phuong Nguyen

  With thunderbird & Gmail POP, things are very easy. I can create filter that will automatically move the mail to the appropriate sub-folder. However, with evolution & Gmail IMAP, I find things very messy. I cannot figure out how to create filter that will automatically move my email to a sub folder. Please advice. Thanks

  Read the article

• Two questions about restoring Thunderbird from a backup

  - by Eric

  Setting up a new Windows 7 PC, I'm puzzled by two things in Thunderbird 3.1.9: I restored a profile from a three-month old backup, no problem. I then copied more recent files into the Mail/ directory, but TBird still shows the old messages. The last message in Inbox is dated 3/16/2011 -- how do I get TBird to display all the messages in the Local Folders/Inbox view? A large number of the existing messages are now displayed in separate tabs -- I can't tell you how many, but there could be over 1000. Which file governs this? Or can I hire someone from Mechanical Turk to come over and manually close each tab?

  Read the article

• IIS Server on XP Machine with tweaked registry and services

  - by user420667

  I have been trying for some time now to setup a webapp on my XP machine at home. Prior to doing this, I had tweaked the registry settings, fiddled with disabling and enabling servies, without recording what I tweaked, which I imagining could be what's causing the problem. I don't want to "reboot" to factory settings, although I suppose that would be nice to know how to do as well. I am more interested in finding out what settings could have influenced the behavior, and who I could contact / what information I could send them that would aid in solving the problem. Thanks.

  Read the article

• DLP projector has odd colors

  - by torbengb

  At my place of work, we have several different video projectors, but they all use DLP technology, and the colors are wrong: for instance, yellow looks more like green, and all other colors are similarly distorted. Any kind of presentation or collaborative work is hindered by these wrong colors. On the laptop screen, the colors are fine but on the projector (hooked up via normal short VGA cable, and showing the same image at the same time), the colors look wrong. This is not about one specific projector or one specific laptop; it seems that any combination of projector + laptop has the exact same problem. Someone said that DLP is poor technology, but that's not true. I'm using a DLP projector at home (regular PC connected via HDMI) and the colors are excellent. Still, there's some kind of curse on the machinery at work. How can we get decent colors?

  Read the article

• Is there any multi-touch graphics tablet with Linux drivers?

  - by Zifre

  After watching the absolutely amazing 10/GUI video, I have been dying to try to implement something like this. I can do the software side quite easily, but I don't have the hardware. The Wacom Bamboo Fun would work, but the Linux drivers don't support the multi-touch features. Microsoft's "UnMouse Pad" looks like the perfect solution, but it is not commercially available yet. Are there any similar devices that would work? Alternatively, is there a way to build a DIY version? (It is fairly easy to build a multi-touch display with a webcam and IR LEDs, but it would not be pressure sensitive. Does anyone have any info on how the UnMouse Pad works and if it is possible to build one?) EDIT: I should clarify that I don't want a multi-touch display. I want the sensor to be separate from the display. If that sounds crazy, watch the 10/GUI video.

  Read the article

• Screenshot in sRGB on Mac OSX

  - by TypeOneError

  Is there a way to force Mac OSX to take screengrabs with the sRGB color space instead of Color LCD? Currently I have to switch to sRGB in Displays, take a snap and then switch back.

  Read the article

• Selection between two laptops for casual gaming [closed]

  - by Prabhpreet

  I have selected two laptops that meet my budget. Here are the differences: Laptop #1: 4GB Ram, Intel Core i5 2450M 2nd Gen processor w/ 2.5 Ghz clockspeed NVIDIA GeForce GT 520MX DDR3 1 GB Dedicated Graphics 750 GB SATA II Hard disk USB 2.0 Ports 6 hrs battery life Laptop #2: 4 GB Ram, Intel Core i5 3210M 3rd Gen processor w/ 2.5 Ghz clockspeed Integrated Intel HD Graphics 4000 500 GB SATA Hard disk USB 3.0 Ports 3 hrs battery life (This concerns me) First and foremost, does dedicated graphics matter for a casual gamer like me? Secondly, does the generation of the processors make a difference despite the same clockspeed. Thirdly, do usb 3.0 ports make a difference? And lastly, which laptop is more future proof? Please help me out. Thanks!

  Read the article

• Lost all data on Windows XP after blue screen

  - by Barb

  I got a blue screen and was trying to boot with my OS disk. Frankly, I was unsure exactly how to do this. I was trying everything and booted in partition mode. Finally, I booted with disk and ran chkdsk /r and was able to log into Windows. But, all of my files and pictures are gone. I have no backup and all I'm sick to think that I lost the last seven years of pictures of my kids. What can I do?

  Read the article

• How to know my wireless card has injection enabled?

  - by shrimpy

  I am playing around with aircrack. And was trying to see whether my wireless card on my laptop can pass the injection test And I end up seeing the following... does it mean my wireless card is not able to run aircrack? root@myubuntu:/home/myubuntu# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"" Nickname:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=0 dBm Noise level=-57 dBm Rx invalid nwid:0 Rx invalid crypt:781 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 root@myubuntu:/home/myubuntu# aireplay-ng -9 eth1 ioctl(SIOCSIWMODE) failed: Invalid argument ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211, ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make sure RFMON is enabled: run 'airmon-ng start eth1 <#>' Sysfs injection support was not found either. root@myubuntu:/home/myubuntu#

  Read the article

• Open source Distributed computing tool

  - by Prasenjit Chatterjee

  I want to set up distributed computing on my Local Area Network consisting a bunch of PCs. Say for the time being each one has the same OS - Windows 7. Is there any opensource tool available so that I can share the resources of these PCs over the LAN and increase the speed of my applications and the memory space. I know that if its a graphics intensive application then, it is not very practical, because the speed of LAN is much slower than Graphics processors. But I only want to share general applications, some basic softwares, Programming language IDEs etc. Can anyone shed some light on it? Thanks in Advance..

  Read the article

< Previous Page | 706 707 708 709 710 711 712 713 714 715 716 717  | Next Page >