Search Results

Search found 21559 results on 863 pages for 'template meta programming'.

Page 715/863 | < Previous Page | 711 712 713 714 715 716 717 718 719 720 721 722  | Next Page >

• debootstrap or virt-install Ubuntu Server Maverick fails

  - by poelinca

  Oki so running any kind of variation of debootsrap i get the following error I: Extracting zlib1g... W: Failure trying to run: chroot /lxc/iso/dodo mount -t proc proc /proc debootstrap.log : mount: permission denied if i manualy chroot into the directory then i get promted with: id: cannot find name for group ID 0 I have no name!@...# i tryed addgroup but it's not installed , apt-get/aptitude : command not found , so i can't do anything with it . I've tryed ubuntu-vm-builder but since it's calling debootstrap i get the same error . Played with it for a few days and then i stoped and gaved virt-install a try , everithing works till i get to the console to finish the install witch shows only : Escape character is ^] and nothing more , no matter what i type . So basicly what i'm trying to do is build a usable chroot system so i can use it with lxc or libvirt . What are my options to get containers/virtualisation up and running ? I've read somewhere that i can use openvz templates with lxc or libvirt ? but how ? Let me know if you need aditional info ( p.s. doing all this on a dedicated server so i can't access it by hand , only ssh , plus on my local pc running ubuntu desktop maverick everithing works ) . EDIT Getting closer , i managed to understand how to use an openvz template with lxc , now the problem comes with the network bridge lxc-start: invalid interface name: br0 # Use same bridge device used in your controlling host setup lxc-start: failed to process 'lxc.network.link = br0 # Use same bridge device used in your controlling host setup ' lxc-start: failed to read configuration file i followed the exact steps to create a bridge and lxc conf looks like: lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 # Use same bridge device used in your controlling host setup lxc.network.hwaddr = {a1:b2:c3:d4:e5:f6} # As appropiate (line only needed if you wish to dhcp later) lxc.network.ipv4 = {10.0.0.100} # (Use 0.0.0.0 if you wish to dhcp later) lxc.network.name = eth0 # could likely be whatever you want Since it's not working i know smth is wrong so could somebody guyde me ? EDIT , looks like the base install was using an custom kernel ( bzImage-2.6.34.6-xxxx-grs-ipv6-65 ) for witch you i didn't found the headers , i did a update-grub after i installed a new kernel , edited menu.lst and no it's using 2.6.35-23-server and now debootstrap is working just fine same as ubuntu-vm-builder .

  Read the article

• SQLAuthority News – Updates on Contests, Books and SQL Server

  - by pinaldave

  There are lots of things happening on this blog and I feel sometime it is difficult to keep up. One of the suggestion I keep on receiving if there is a single page where one can visit and know the updates. I did consider of the same at some point but in era of RSS Feed it is difficult to have proper audience to that page. Here are few updates on various contest and books give away in recent time. Combo set of 5 Joes 2 Pros Book – 1 for YOU and 1 for Friend – I have received so many entries for this contest. Many have sent me email asking if this contest can be extended by couple of days. For the same the deadline for this contest is now Nov 10th 7 AM. You can send your entries by that time. The prize is 2 combo set of Joes 2 Pros is of USD 444. If you have not take part in the contest please take part now. Guess What is in the box? – There were many entry for this contest. We played this contest on blog as well, facebook. The answer of this contest was announced in 2 days in blog post announcing my new book. The winner was Manas Dash from Bangalore. He answered “The box will contain SQL book authored by Vinod and Pinal”. This was the closest answer we received. Win 5 SQL Programming Book Contest will have winner announced by Nov 15th and winners will be sent email. Win 5 SQL Wait Stats Book Contest is closed and winners have been sent their award. My third book SQL Server Interview Questions and Answers have run out of stock in India in 36 hours of its launch. We are working very hard to make it available again. Thank you again for excellent support! Without your participation all the give away have no significance. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, PostADay, Readers Contribution, Readers Question, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• JavaScript in different browsers

  - by PointsToShare

  Adventures with JavaScript rendered in IE 8, Chrome 15, and Firefox 8.0 I have written a little monogram about the advantages of Math and wrote a few JavaScript applications to demonstrate them. I was a bit careless and used elements on the page in my JavaScript without using any of the GetElementsByXXXX methods to identify them.  Say I had a text box named tbSeqNum into which I entered a number to be used in a computation. In my code I simply referred to its value by using it directly. Like here: Function Blah() {                 return tbSeqNum.value; } This ran fine in IE8. In IE, the elements are available as global variables. This is not the case in either Firefox or Chrome. In there one has to create the variable and only then use it. Assuming I also used tbSeqNum as the element’s ID, this works: Function Blah() {                 return GetElementById(“tbSeqNum”).value; } Naturally this corrected function also works in IE, so be warned. Also, coming from windows programming (I am long in the tooth and programmed long before the internet), I have a habit of putting an “Exit” button on my pages and setting their onclick to: onclick=”window.close()”. Again, this works fine in IE. In Firefox and chrome, it does not! There you can only close a window that you opened in the code. A window that was opened by navigation to a URL will not close.  Before I deployed mu code to my website, I painfully removed all my Exit buttons. But my greatest surprise came when I tested my pages in the various browsers. In my code I do a comparison on the performance of two algorithms used to solve the same problem. One is brute force, the other uses a mathematical formula. The compare functions runs each many times and displays the time it took for each and also the ratio. Chrome runs JavaScript between 5 and 10 times faster than Firefox and between 50 and 100 times faster that IE. Wow!!! This difference is especially remarkable when the code uses iteration. I suspect that the JS engines in Chrome and Firefox simply cache the result of a function and if it is called again with the same parameters, it returns the cached result. To see it in action play run the “How Many Squares” page in www.mgsltns.com/games.htm The host is running on Unix, so the link is case sensitive. Last Note: IE9 runs JS a bit faster, but still lags behind almost as badly. That’s All Folks!

  Read the article

• What is Database Continuous Integration?

  - by SQLDev

  Although not everyone is practicing continuous integration, many have at least heard of the concept. A recent poll on www.simple-talk.com indicates that 40% of respondents are employing the technique. It is widely accepted that the earlier issues are identified in the development process, the lower the cost to the development process. The worst case scenario, of course, is for the bug to be found by the customer following the product release. A number of Agile development best practices have evolved to combat this problem early in the development process, including pair programming, code inspections and unit testing. Continuous integration is one such Agile concept that tackles the problem at the point of committing a change to source control. This can alternatively be run on a regular schedule. This triggers a sequence of events that compiles the code and performs a variety of tests. Often the continuous integration process is regarded as a build validation test, and if issues were to be identified at this stage, the testers would simply not 'waste their time ' and touch the build at all. Such a ‘broken build’ will trigger an alert and the development team’s number one priority should be to resolve the issue. How application code is compiled and tested as part of continuous integration is well understood. However, this isn’t so clear for databases. Indeed, before I cover the mechanics of implementation, we need to decide what we mean by database continuous integration. For me, database continuous integration can be implemented as one or more of the following: 1)      Your application code is being compiled and tested. You therefore need a database to be maintained at the corresponding version. 2)      Just as a valid application should compile, so should the database. It should therefore be possible to build a new database from scratch. 3)     Likewise, it should be possible to generate an upgrade script to take your already deployed databases to the latest version. I will be covering these in further detail in future blogs. In the meantime, more information can be found in the whitepaper linked off www.red-gate.com/ci If you have any questions, feel free to contact me directly or post a comment to this blog post.

  Read the article

• What is Database Continuous Integration?

  - by David Atkinson

  Although not everyone is practicing continuous integration, many have at least heard of the concept. A recent poll on www.simple-talk.com indicates that 40% of respondents are employing the technique. It is widely accepted that the earlier issues are identified in the development process, the lower the cost to the development process. The worst case scenario, of course, is for the bug to be found by the customer following the product release. A number of Agile development best practices have evolved to combat this problem early in the development process, including pair programming, code inspections and unit testing. Continuous integration is one such Agile concept that tackles the problem at the point of committing a change to source control. This can alternatively be run on a regular schedule. This triggers a sequence of events that compiles the code and performs a variety of tests. Often the continuous integration process is regarded as a build validation test, and if issues were to be identified at this stage, the testers would simply not 'waste their time ' and touch the build at all. Such a ‘broken build’ will trigger an alert and the development team’s number one priority should be to resolve the issue. How application code is compiled and tested as part of continuous integration is well understood. However, this isn’t so clear for databases. Indeed, before I cover the mechanics of implementation, we need to decide what we mean by database continuous integration. For me, database continuous integration can be implemented as one or more of the following: 1)      Your application code is being compiled and tested. You therefore need a database to be maintained at the corresponding version. 2)      Just as a valid application should compile, so should the database. It should therefore be possible to build a new database from scratch. 3)     Likewise, it should be possible to generate an upgrade script to take your already deployed databases to the latest version. I will be covering these in further detail in future blogs. In the meantime, more information can be found in the whitepaper linked off www.red-gate.com/ci If you have any questions, feel free to contact me directly or post a comment to this blog post.

  Read the article

• Game development: “Play Now” via website vs. download & install

  - by Inside

  Heyo, I've spent some time looking over the various threads here on gamedev and also on the regular stackoverflow and while I saw a lot of posts and threads regarding various engines that could be used in game development, I haven't seen very much discussion regarding the various platforms that they can be used on. In particular, I'm talking about browser games vs. desktop games. I want to develop a simple 3D networked multiplayer game - roughly on the graphics level of Paper Mario and gameplay with roughly the same level of interaction as a hack & slash action/adventure game - and I'm having a hard time deciding what platform I want to target with it. I have some experience with using C++/Ogre3D and Python/Panda3D (and also some synchronized/networked programming), but I'm wondering if it's worth it to spend the extra time to learn another language and another engine/toolkit just so that the game can be played in a browser window (I'm looking at jMonkeyEngine right now). For simple & short games the newgrounds approach (go to the site, click "play now", instant gratification) seems to work well. What about for more complex games? Is there a point where the complexity of a game is enough for people to say "ok, I'm going to download and play that"? Is it worth it to go with engines that are less-mature, have less documentation, have fewer features, and smaller communities* just so that a (possibly?) larger audience can be reached? Does it make sense to even go with a web-environment for the kind of game that I want to make? Does anyone have any experiences with decisions like this? Thanks! (* With the exception of flash-based engines it seems like most of the other approaches have these downsides when compared to what is available for desktop-based environments. I'd go with flash, but I'm worried that flash's 3D capabilities aren't mature enough right now to do what I want easily. There's also Unity3D, but I'm not sure how I feel about that at all. It seems highly polished, but requires a plugin to be downloaded for the game to be played -- at that rate I might as well have players download my game.)

  Read the article

• The Red Gate Guide to SQL Server Team based Development Free e-book

  - by Mladen Prajdic

  After about 6 months of work, the new book I've coauthored with Grant Fritchey (Blog|Twitter), Phil Factor (Blog|Twitter) and Alex Kuznetsov (Blog|Twitter) is out. They're all smart folks I talk to online and this book is packed with good ideas backed by years of experience. The book contains a good deal of information about things you need to think of when doing any kind of multi person database development. Although it's meant for SQL Server, the principles can be applied to any database platform out there. In the book you will find information on: writing readable code, documenting code, source control and change management, deploying code between environments, unit testing, reusing code, searching and refactoring your code base. I've written chapter 5 about Database testing and chapter 11 about SQL Refactoring. In the database testing chapter (chapter 5) I cover why you should test your database, why it is a good idea to have a database access interface composed of stored procedures, views and user defined functions, what and how to test. I talk about how there are many testing methods like black and white box testing, unit and integration testing, error and stress testing and why and how you should do all those. Sometimes you have to convince management to go for testing in the development lifecycle so I give some pointers and tips how to do that. Testing databases is a bit different from testing object oriented code in a way that to have independent unit tests you need to rollback your code after each test. The chapter shows you ways to do this and also how to avoid it. At the end I show how to test various database objects and how to test access to them. In the SQL Refactoring chapter (chapter 11) I cover why refactor and where to even begin refactoring. I also who you a way to achieve a set based mindset to solve SQL problems which is crucial to good SQL set based programming and a few commonly seen problems to refactor. These problems include: using functions on columns in the where clause, SELECT * problems, long stored procedure with many input parameters, one subquery per condition in the select statement, cursors are good for anything problem, using too large data types everywhere and using your data in code for business logic anti-pattern. You can read more about it and download it here: The Red Gate Guide to SQL Server Team-based Development Hope you like it and send me feedback if you wish too.

  Read the article

• Adding Attributes to Generated Classes

  ASP.NET MVC 2 adds support for data annotations, implemented via attributes on your model classes.  Depending on your design, you may be using an OR/M tool like Entity Framework or LINQ-to-SQL to generate your entity classes, and you may further be using these entities directly as your Model.  This is fairly common, and alleviates the need to do mapping between POCO domain objects and such entities (though there are certainly pros and cons to using such entities directly). As an example, the current version of the NerdDinner application (available on CodePlex at nerddinner.codeplex.com) uses Entity Framework for its model.  Thus, there is a NerdDinner.edmx file in the project, and a generated NerdDinner.Models.Dinner class.  Fortunately, these generated classes are marked as partial, so you can extend their behavior via your own partial class in a separate file.  However, if for instance the generated Dinner class has a property Title of type string, you cant then add your own Title of type string for the purpose of adding data annotations to it, like this: public partial class Dinner { [Required] public string Title { get;set; } } This will result in a compilation error, because the generated Dinner class already contains a definition of Title.  How then can we add attributes to this generated code?  Do we need to go into the T4 template and add a special case that says if were generated a Dinner class and it has a Title property, add this attribute?  Ick. MetadataType to the Rescue The MetadataType attribute can be used to define a type which contains attributes (metadata) for a given class.  It is applied to the class you want to add metadata to (Dinner), and it refers to a totally separate class to which youre free to add whatever methods and properties you like.  Using this attribute, our partial Dinner class might look like this: [MetadataType(typeof(Dinner_Validation))] public partial class Dinner {}   public class Dinner_Validation { [Required] public string Title { get; set; } } In this case the Dinner_Validation class is public, but if you were concerned about muddying your API with such classes, it could instead have been created as a private class within Dinner.  Having the validation attributes specified in their own class (with no other responsibilities) complies with the Single Responsibility Principle and makes it easy for you to test that the validation rules you expect are in place via these annotations/attributes. Thanks to Julie Lerman for her help with this.  Right after she showed me how to do this, I realized it was also already being done in the project I was working on. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• JavaOne Rock Star – Adam Bien

  - by Janice J. Heiss

  Among the most celebrated developers in recent years, especially in the domain of Java EE and JavaFX, is consultant Adam Bien, who, in addition to being a JavaOne Rock Star for Java EE sessions given in 2009 and 2011, is a Java Champion, the winner of Oracle Magazine’s 2011 Top Java Developer of the Year Award, and recently won a 2012 JAX Innovation Award as a top Java Ambassador. Bien will be presenting the following sessions: TUT3907 - Java EE 6/7: The Lean Parts CON3906 - Stress-Testing Java EE 6 Applications Without Stress CON3908 - Building Serious JavaFX 2 Applications CON3896 - Interactive Onstage Java EE Overengineering I spoke with Bien to get his take on Java today. He expressed excitement that the smallest companies and startups are showing increasing interest in Java EE. “This is a very good sign,” said Bien. “Only a few years ago J2EE was mostly used by larger companies -- now it becomes interesting even for one-person shows. Enterprise Java events are also extremely popular. On the Java SE side, I'm really excited about Project Nashorn.” Nashorn is an upcoming JavaScript engine, developed fully in Java by Oracle, and based on the Da Vinci Machine (JSR 292) which is expected to be available for Java 8.    Bien expressed concern about a common misconception regarding Java's mediocre productivity. “The problem is not Java,” explained Bien, “but rather systems built with ancient patterns and approaches. Sometimes it really is ‘Cargo Cult Programming.’ Java SE/EE can be incredibly productive and lean without the unnecessary and hard-to-maintain bloat. The real problems are ‘Ivory Towers’ and not Java’s lack of productivity.” Bien remarked that if there is one thing he wanted Java developers to understand it is that, "Premature optimization is the root of all evil. Or at least of some evil. Modern JVMs and application servers are hard to optimize upfront. It is far easier to write simple code and measure the results continuously. Identify the hotspots first, then optimize.”   He advised Java EE developers to, “Rethink everything you know about Enterprise Java. Before you implement anything, ask the question: ‘Why?’ If there is no clear answer -- just don't do it. Most well known best practices are outdated. Focus your efforts on the domain problem and not the technology.” Looking ahead, Bien remarked, “I would like to see open source application servers running directly on a hypervisor. Packaging the whole runtime in a single file would significantly simplify the deployment and operations.” Check out a recent Java Magazine interview with Bien about his Java EE 6 stress monitoring tool here.

  Read the article

• SQL SERVER – Creating All New Database with Full Recovery Model

  - by pinaldave

  Sometimes, complex problems have very simple solutions. Let us see the following email which I received recently. “Hi Pinal, In our system when we create new database, by default, they are all created with the Simple Recovery Model. We have to manually change the recovery model after we create the database. We used the following simple T-SQL code: CREATE DATABASE dbname. We are very frustrated with this situation. We want all our databases to have the Full Recovery Model option by default. We are considering the following methods; please suggest the most efficient one among them. 1) Creating a Policy; when it is violated, the database model can be fixed 2) Triggers at Server Level 3) Automated Job which goes through all the databases and checks their recovery model; if the DBA has not changed the model, then the job will list the Databases and change their recovery model Also, we have a situation where we need a database in the Simple Recovery Model as well – how to white list them? Please suggest the best method.” Indeed, an interesting email! The answer to their question, i.e., which is the best method to fit their needs (white list, default, etc)? It will be NONE of the above. Here is the solution in one line and also the easiest way: Just go to your Model database: Path in SSMS >> Databases > System Databases >> model >> Right Click Properties >> Options >> Recovery Model - Select Full from dropdown. Every newly created database takes its base template from the Model Database. If you create a custom SP in the Model Database, when you create a new database, it will automatically exist in that database. Any database that was already created before making changes in the Model Database will not be affected at all. Creating Policy is also a good method, and I will blog about this in a separate blog post, but looking at current specifications of the reader, I think the Model Database should be modified to have a Full Recovery Option. While writing this blog post, I remembered my another blog post where the model database log file was growing drastically even though there were no transactions SQL SERVER – Log File Growing for Model Database – model Database Log File Grew Too Big. NOTE: Please do not touch the Model Database unnecessary. It is a strict “No.” If you want to create an object that you need in all the databases, then instead of creating it in model database, I suggest that you create a new database called maintenance and create the object there. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, Readers Question, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Back-sliding into Unmanaged Code

  - by Laila

  It is difficult to write about Microsoft's ambivalence to .NET without mentioning clichés about dog food.  In case you've been away a long time, you'll remember that Microsoft surprised everyone with the speed and energy with which it introduced and evangelised the .NET Framework for managed code. There was good reason for this. Once it became obvious to all that it had sleepwalked into third place as a provider of development languages, behind Borland and Sun, it reacted quickly to attract the best talent in the industry to produce a windows version of the Java runtime, with Bounds-checking, Automatic Garbage collection, structures exception handling and common data types. To develop applications for this managed runtime, it produced several excellent languages, and more are being provided. The only thing Microsoft ever got wrong was to give it a stupid name. The logical step for Microsoft would be to base the entire operating system on the .NET framework, and to re-engineer its own applications. In 2002, Bill Gates, then Microsoft Chairman and Chief Software Architect said about their plans for .NET, "This is a long-term approach. These things don't happen overnight." Now, eight years later, we're still waiting for signs of the 'long-term approach'. Microsoft's vision of an entirely managed operating system has subsided since the Vista fiasco, but stays alive yet dormant as Midori, still being developed by Microsoft Research. This is an Internet-centric fork of the singularity operating system, a research project started in 2003 to build a highly-dependable operating system in which the kernel, device drivers, and applications are all written in managed code. Midori is predicated on the prevalence of connected systems, with provisions for distributed concurrency where application components exist 'in the cloud', and supports a programming model that can tolerate cancellation, intermittent connectivity and latency. It features an entirely new security model that sandboxes applications for increased security. So have Microsoft converted its existing applications to the .NET framework? It seems not. What Windows applications can run on Mono? Very few, it seems. We all thought that .NET spelt the end of DLL Hell and the need for COM interop, but it looks as if Bill Gates' idea of 'not overnight' might stretch to a decade or more. The Operating System has shown only minimal signs of migrating to .NET. Even where the use of .NET has come to dominate, when used for server applications with IIS, IIS itself is still entirely developed in unmanaged code. This is an irritation to Microsoft's greatest supporters who committed themselves fully to the NET framework, only to find parts of the Ambivalent Microsoft Empire quietly backsliding into unmanaged code and the awful C++. It is a strategic mistake that the invigorated Apple didn't make with the Mac OS X Architecture. Cheers, Laila

  Read the article

• Should I be put off a junior role that uses an online development test?

  - by Ninefingers

  I've applied for a junior development role, or rather been found by a recruiter looking for a developer. In order to get to a telephone interview stage I've been asked to sit one of those online coding assessments. This wasn't quite what I expected. I consider myself a fairly good developer for my age and experience, but I've no illusions about being Don Knuth or anything. The test was a series of incredibly obtuse questions asking about the results of various obscure evaluations. About 30 minutes in I was thinking to myself I hadn't intended to enter an obfuscated code contest/code golf exercise. After my last telephone interview I was asked to build something. I did. That seemed fair. Go away and work this out is more my in office experience of programming than "please evaluate this combination of lambdas, filters, maps, lists, tuples etc". So I'm a little put off, to be honest. I never claimed to know the language inside out or all the little corner cases. My questions, then: Should I be put off? Why? Why not? Are these kinds of tests what I should be expecting for junior roles? Should I learn stuff exam style? That seems to be the objective of these tests, for which you are timed and not supposed to use references or books? Normally, in the course of development I have a fairly good idea of basic types, rules, flow control and whatever. Occasionally I'll come up on something I need to use a regex for and have to go and remind myself of the exact piece of syntax I need if trying what I think should work doesn't. Or I'll come up against a module I've not used before and go and look it up. For example, if I wanted to write a server using sockets in C right now, I'd probably check the last piece of code I wrote doing that (and or the various books I have) and work from there. Chances are I probably couldn't do it exactly from scratch and from memory, although I can tell you you'd need a socket(), bind(), listen() and accept() call and you might also want select() depending on whether you intend to pthread_create or not. So I know what the calls are, but not their specific parameter list. What are your experiences if you are a recruiting manager? Are you after programmers who can quote you the API or do you not mind if your programmers have a few books on their desk and google function calls every so often?

  Read the article

• Am I experienced enough to learn and develop immediately using Ruby on Rails?

  - by acheong87

  General Question I understand that discussions revolving around questions of this form run the risk of becoming too specific to help others. So, perhaps a better, general question would be: What kind of experience, if any, translates easily to Ruby on Rails; and if none, then what's the learning curve like, in comparison to other popular languages? Background I have the opportunity to build a website using whatever technologies I wish to use. It's a fairly simple website, for listing products, taking payments, managing customer data, providing a back-end portal for employees to manage data, possibly hooking in flight information (the products are travel related), possibly integrating a blog and all the social-networking goodies. Specific Problem I have to let the client know by tonight whether I'm interested in taking up this project, before he talks to other potential developers, but I'm on the fence. I already work a full-time C++ development job, so the money doesn't do it for me. It's the opportunity to (be paid to) learn some new technologies and to have a real, running product in the end. I've heard and read great things about Ruby, and am really intrigued. I zipped through some introductory Ruby tutorials, no sweat. However I found the Rails tutorials a little overwhelming, especially not being able to try it out anywhere. And researching Rails hosts like Heroku and EngineYard makes me think that maybe I don't know what I'm getting myself into. The ship's leaving port! I wish I had more time to learn, better yet play with the language, but I have to decide soon! Should I venture or pass? Additional Details My experiences are in C/C++/Tcl/Perl/PHP/jQuery, and basic knowledge of Java/C#. I didn't study C.S. formally so I wasn't exposed to design principles, programming paradigms, etc., which is my greatest concern. Will my lack of understanding in this realm make RoR frustrating to learn? Will it be so incompatible with a C++ "way" of thinking that I'll wish I never started? Am I putting my client at risk by attempting this? If it helps, I'm quick to learn new things (self-taught so far) and care a great deal about correctness, using things for their intended purposes, and so on. I've read numerous recommendations of Agile Development with Rails and would love to read it (though perhaps, while developing in parallel, for shortness of time). Worse comes to worst, I'd give up and do the standard LAMP gig, of course, not charging the client for wasted time. But I'm hoping to avoid the project altogether if it's gonna come down to that! Thanks in advance for any tips, insights, votes of confidence, votes of discouragement (for the better), and such.

  Read the article

• Free eBook with SQL Server performance tips and nuggets

  - by Claire Brooking

  I’ve often found that the kind of tips that turn out to be helpful are the ones that encourage me to make a small step outside of a routine. No dramatic changes – just a quick suggestion that changes an approach. As a languages student at university, one of the best I spotted came from outside the lecture halls and ended up saving me time (and lots of huffing and puffing) – the use of a rainbow of sticky notes for well-used pages and letter categories in my dictionary. Simple, but armed with a heavy dictionary that could double up as a step stool, those markers were surprisingly handy. When the Simple-Talk editors told me about a book they were planning that would give a series of tips for developers on how to improve database performance, we all agreed it needed to contain a good range of pointers for big-hitter performance topics. But we wanted to include some of the smaller, time-saving nuggets too. We hope we’ve struck a good balance. The 45 Database Performance Tips eBook covers different tips to help you avoid code that saps performance, whether that’s the ‘gotchas’ to be aware of when using Object to Relational Mapping (ORM) tools, or what to be aware of for indexes, database design, and T-SQL. The eBook is also available to download with SQL Prompt from Red Gate. We often hear that it’s the productivity-boosting side of SQL Prompt that makes it useful for everyday coding. So when a member of the SQL Prompt team mentioned an idea to make the most of tab history, a new feature in SQL Prompt 6 for SQL Server Management Studio, we were intrigued. Now SQL Prompt can save tabs we have been working on in SSMS as a way to maintain an active template for queries we often recycle. When we need to reuse the same code again, we search for our saved tab (and we can also customize its name to speed up the search) to get started. We hope you find the eBook helpful, and as always on Simple-Talk, we’d love to hear from you too. If you have a performance tip for SQL Server you’d like to share, email Melanie on the Simple-Talk team ([email protected]) and we’ll publish a collection in a follow-up post.

  Read the article

• Source of (programmer) inefficiency

  - by Daniel

  I am interested to gain a better insight about the possible reasons of personal inefficiency as programmers (and only in programming) due to – simply - our own errors (because we are humans – well, almost all of us). I am not interested in how much we are productive or in how many adjustements the customer asks for when the work is done, but where and how each of us spend that part of its time in tasks that are unproductive and there is no one to blame except ourselves. Excluding ego - feeding and / or self – gratification, what I am trying to get (for all of us) is: what are the common issues eating our time; insight on reasons for that issues; identify simple way for us, personally (not delegating actions to other or our organizations), to correct our own problems. Please, do not think in academic terms but aim at the opportunity to compare our daily experiences and understand what are and how we try to fix our personal deficiencies. If you are interested to respond to this post, please: integrate the list if you see something important (or obvious) missing; highlight or name honestly your first issue tellng the way you try to address and solve your issue acting on yourself and yourself only in a sort of "continuous quality improving" My criteria for accepting the answer is: choose the best solution (feasibility and utility) to fix one (or more) of the problems of the list. Of course, selecting an error is not a vote on our skills: maybe we are hyper professional programmers and we lose ten minutes only every year or we are terribly inefficient, losing a couple of days a week: reasons for inefficiency could be really the same - but in a different scale. A possible list: Plain error in the names (variables, functions). Inability to see the obvious in your code. Misreading. Lack of concentration. Trying to use a technology you have not mastered. Errors with data types. Time required to understand your previous code or your documentation. Trying to do something more than requested because you enjoy it Using solutions more complicated than required because you enjoy it. Plain logical errors. Errors due to your fault in communications. Distraction My first personal issue: "Trying to use a technology you do not master." I have to use daily several technologies and I often need to spend significant time correcting code because my assumptions were plainly wrong. Reasons for this: production needs put high pressure and make difficult to find the time to learn. I try to address this reading technical books - as many as I can - even if this actually consumes a lot of time.

  Read the article

• Which web framework to use under Backbonejs?

  - by egidra

  For a previous project, I was using Backbonejs alongside Django, but I found out that I didn't use many features from Django. So, I am looking for a lighter framework to use underneath a Backbonejs web app. I never used Django built in templates. When I did, it was to set up the initial index page, but that's all. I did use the user management system that Django provided. I used the models.py, but never views.py. I used urls.py to set up which template the user would hit upon visiting the site. I noticed that the two features that I used most from Django was South and Tastypie, and they aren't even included with Django. Particularly, django-tastypie made it easy for me to link up my frontend models to my backend models. It made it easy to JSONify my front end models and send them to Tastypie. Although, I found myself overriding a lot of tastypie's methods for GET, PUT, POST requests, so it became useless. South made it easy to migrate new changes to the database. Although, I had so much trouble with South. Is there a framework with an easier way of handling database modifications than using South? When using South with multiple people, we had the worse time keeping our databases synced. When someone added a new table and pushed their migration to git, the other two people would spend days trying to use South's automatic migration, but it never worked. I liked how Rails had a manual way of migrating databases. Even though I used Tastypie and South a lot, I found myself not actually liking them because I ended up overriding most Tastypie methods for each Resource, and I also had the worst trouble migrating new tables and columns with South. So, I would like a framework that makes that process easier. Part of my problem was that they are too "magical". Which framework should I use? Nodejs or a lighter Python framework? Which works best with my above criteria?

  Read the article

• Voxel Engine in Multiplayer?

  - by Oliver Schöning

  This is a question more out of Interest for now, because I am not even near to the point that I could create this project at the moment. I really like the progress on the Atomontage Engine. A Voxel engine that is WIP at the moment. I would like to create a Voxel SERVER eventually. First in JavaScript (That's what I am learning right now) later perhaps in C++ for speed. Remember, I am perfectly aware that this is very hard! This is a brainstorm for the next 10 years as for now. What I would like to achieve one day is a Multiplayer Game in the Browser where the voxels positions are updated by XYZ input from the server. The Browser Does only 3 things: sending player input to the server, updating Voxel positions send from the server and rendering the world. I imagine using something like the Three.js libary on the client side. So that would be my programming dream right there... Now to something simpler for the near future. Right now I am learning javascript. And I am making games with Construct2. (A really cool JavaScript "game maker") The plan is to create a 2D Voxel enviorment (Block Voxels) on the Socket.IO Server* and send the position of the Voxels and Players to the Client side which then positions the Voxel Blocks to the Server Output coordinates. I think that is a bit more manageable then the other bigger idea. And also there should be no worries about speed with this type of project in JavaScript (I hope). Extra Info: *I am using nodejs (Without really knowing what it does besides making Socket.IO work) So now some questions: Is the "dream project" doable in JavaScript? Or is C++ just the best option because it does not take as long to be interpreted at run time like JavaScript? What are the limitations? I can think of some: Need of a Powerful server depending on how much information the server has to process. Internet Speed; Sending the data of the Voxel positions to every player could add up being very high! The browser FPS might go down quickly if rendering to many objects. One way of fixing reducing the packages Could be to let the browser calculate some of the Voxel positions from Several Values. But that would slow down the Client side too. What about the more achievable project? I am almost 100% convinced that this is possible in JavaScript, and that there are several ways of doing this. This is just XY position Updating for now.. Hope this did make some sense. Please comment if you got something to say :D

  Read the article

• How to Use Your Android Phone as a Modem; No Rooting Required

  - by Jason Fitzpatrick

  If your cellular provider’s mobile hotspot/tethering plans are too pricey, skip them and tether your phone to your computer without inflating your monthly bill. Read on to see how you can score free mobile internet. We recently received a letter from a How-To Geek reader, requesting help linking their Android phone to their laptop to avoid the highway robbery their cellular provider was insisting upon: Dear How-To Geek, I recently found out that my cellphone company charges $30 a month to use your smartphone as a data modem. That’s an outrageous price when I already pay an extra $15 a month charge just because they insist that because I have a smartphone I need a data plan because I’ll be using so much more data than other users. They expect me to pay what amounts to a $45 a month premium just to do some occasional surfing and email checking from the comfort of my laptop instead of the much smaller smartphone screen! Surely there is a work around? I’m running Windows 7 on my laptop and I have an Android phone running Android OS 2.2. Help! Sincerely, No Double Dipping! Well Double Dipping, this is a sentiment we can strongly related to as many of us on staff are in a similar situation. It’s absurd that so many companies charge you to use the data connection on the phone you’re already paying for. There is no difference in bandwidth usage if you stream Pandora to your phone or to your laptop, for example. Fortunately we have a solution for you. It’s not free-as-in-beer but it only costs $16 which, over the first year of use alone, will save you $344. Let’s get started! Latest Features How-To Geek ETC What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Make Efficient Use of Tab Bar Space by Customizing Tab Width in Firefox See the Geeky Work Done Behind the Scenes to Add Sounds to Movies [Video] Use a Crayon to Enhance Engraved Lettering on Electronics Adult Swim Brings Their Programming Lineup to iOS Devices Feel the Chill of the South Atlantic with the Antarctica Theme for Windows 7 Seas0nPass Now Offers Untethered Apple TV Jailbreaking

  Read the article

• Physics/Graphics Components

  - by Brett Powell

  I have spent the last 48 hours reading up on Object Component systems, and feel I am ready enough to start implementing it. I got the base Object and Component classes created, but now that I need to start creating the actual components I am a bit confused. When I think of them in terms of HealthComponent or something that would basically just be a property, it makes perfect sense. When it is something more general as a Physics/Graphics component, I get a bit confused. My Object class looks like this so far (If you notice any changes I should make please let me know, still new to this)... typedef unsigned int ID; class GameObject { public: GameObject(ID id, Ogre::String name = ""); ~GameObject(); ID &getID(); Ogre::String &getName(); virtual void update() = 0; // Component Functions void addComponent(Component *component); void removeComponent(Ogre::String familyName); template<typename T> T* getComponent(Ogre::String familyName) { return dynamic_cast<T*>(m_components[familyName]); } protected: // Properties ID m_ID; Ogre::String m_Name; float m_flVelocity; Ogre::Vector3 m_vecPosition; // Components std::map<std::string,Component*> m_components; std::map<std::string,Component*>::iterator m_componentItr; }; Now the problem I am running into is what would the general population put into Components such as Physics/Graphics? For Ogre (my rendering engine) the visible Objects will consist of multiple Ogre::SceneNode (possibly multiple) to attach it to the scene, Ogre::Entity (possibly multiple) to show the visible meshes, and so on. Would it be best to just add multiple GraphicComponent's to the Object and let each GraphicComponent handle one SceneNode/Entity or is the idea to have one of each Component needed? For Physics I am even more confused. I suppose maybe creating a RigidBody and keeping track of mass/interia/etc. would make sense. But I am having trouble thinking of how to actually putting specifics into a Component. Once I get a couple of these "Required" components done, I think it will make a lot more sense. As of right now though I am still a bit stumped.

  Read the article

• ODI 11g - Dynamic and Flexible Code Generation

  - by David Allan

  ODI supports conditional branching at execution time in its code generation framework. This is a little used, little known, but very powerful capability - this let's one piece of template code behave dynamically based on a runtime variable's value for example. Generally knowledge module's are free of any variable dependency. Using variable's within a knowledge module for this kind of dynamic capability is a valid use case - definitely in the highly specialized area. The example I will illustrate is much simpler - how to define a filter (based on mapping here) that may or may not be included depending on whether at runtime a certain value is defined for a variable. I define a variable V_COND, if I set this variable's value to 1, then I will include the filter condition 'EMP.SAL > 1' otherwise I will just use '1=1' as the filter condition. I use ODIs substitution tags using a special tag '<$' which is processed just prior to execution in the runtime code - so this code is included in the ODI scenario code and it is processed after variables are substituted (unlike the '<?' tag).  So the lines below are not equal ... <$ if ( "#V_COND".equals("1")  ) { $> EMP.SAL > 1 <$ } else { $> 1 = 1 <$ } $> <? if ( "#V_COND".equals("1")  ) { ?> EMP.SAL > 1 <? } else { ?> 1 = 1 <? } ?> When the <? code is evaluated the code is executed without variable substitution - so we do not get the desired semantics, must use the <$ code. You can see the jython (java) code in red is the conditional if statement that drives whether the 'EMP.SAL > 1' or '1=1' is included in the generated code. For this illustration you need at least the ODI 11.1.1.6 release - with the vanilla 11.1.1.5 release it didn't work for me (may be patches?). As I mentioned, normally KMs don't have dependencies on variables - since any users must then have these variables defined etc. but it does afford a lot of runtime flexibility if such capabilities are required - something to keep in mind, definitely.

  Read the article

• Blog Buzz - Devoxx 2011

  - by Janice J. Heiss

  Some day I will make it to Devoxx – for now, I’m content to vicariously follow the blogs of attendees and pick up on what’s happening.  I’ve been doing more blog "fishing," looking for the best commentary on 2011 Devoxx. There’s plenty of food for thought – and the ideas are not half-baked.The bloggers are out in full, offering useful summaries and commentary on Devoxx goings-on.Constantin Partac, a Java developer and a member of Transylvania JUG, a community from Cluj-Napoca/Romania, offers an excellent summary of the Devoxx keynotes. Here’s a sample:“Oracle Opening Keynote and JDK 7, 8, and 9 Presentation•    Oracle is committed to Java and wants to provide support for it on any device.•    JSE 7 for Mac will be released next week.•    Oracle would like Java developers to be involved in JCP, to adopt a JSR and to attend local JUG meetings.•    JEE 7 will be released next year.•    JEE 7 is focused on cloud integration, some of the features are already implemented in glassfish 4 development branch.•    JSE 8 will be release in summer of 2013 due to “enterprise community request” as they can not keep the pace with an 18    month release cycle.•    The main features included in JSE8 are lambda support, project Jigsaw, new Date/Time API, project Coin++ and adding   support for sensors. JSE 9 probably will focus on some of these features:1.    self tuning JVM2.    improved native language integration3.    processing enhancement for big data4.    reification (adding runtime class type info for generic types)5.    unification of primitive and corresponding object classes6.    meta-object protocol in order to use type and methods define in other JVM languages7.    multi-tenancy8.    JVM resource management” Thanks Constantin! Ivan St. Ivanov, of SAP Labs Bulgaria, also commented on the keynotes with a different focus.  He summarizes Henrik Stahl’s look ahead to Java SE 8 and JavaFX 3.0; Cameron Purdy on Java EE and the cloud; celebrated Java Champion Josh Bloch on what’s good and bad about Java; Mark Reinhold’s quick look ahead to Java SE 9; and Brian Goetz on lambdas and default methods in Java SE 8. Here’s St. Ivanov’s account of Josh Bloch’s comments on the pluses of Java:“He started with the virtues of the platform. To name a few:    Tightly specified language primitives and evaluation order – int is always 32 bits and operations are executed always from left  to right, without compilers messing around    Dynamic linking – when you change a class, you need to recompile and rebuild just the jar that has it and not the whole application    Syntax  similarity with C/C++ – most existing developers at that time felt like at home    Object orientations – it was cool at that time as well as functional programming is today    It was statically typed language – helps in faster runtime, better IDE support, etc.    No operator overloading – well, I’m not sure why it is good. Scala has it for example and that’s why it is far better for defining DSLs. But I will not argue with Josh.”It’s worth checking out St. Ivanov’s summary of Bloch’s views on what’s not so great about Java as well. What's Coming in JAX-RS 2.0Marek Potociar, Principal Software Engineer at Oracle and currently specification lead of Java EE RESTful web services API (JAX-RS), blogged on his talk about what's coming in JAX-RS 2.0, scheduled for final release in mid-2012.  Here’s a taste:“Perhaps the most wanted addition to the JAX-RS is the Client API, that would complete the JAX-RS story, that is currently server-side only. In JAX-RS 2.0 we are adding a completely interface-based and fluent client API that blends nicely in with the existing fluent response builder pattern on the server-side. When we started with the client API, the first proposal contained around 30 classes. Thanks to the feedback from our Expert Group we managed to reduce the number of API classes to 14 (2 of them being exceptions)! The resulting is compact while at the same time we still managed to create an API that reflects the method invocation context flow (e.g. once you decide on the target URI and start setting headers on the request, your IDE will not try to offer you a URI setter in the code completion). This is a subtle but very important usability aspect of an API…” Obviously, Devoxx is a great Java conference, one that is hitting this year at a time when much is brewing in the platform and beginning to be anticipated.

  Read the article

• Altering a Column Which has a Default Constraint

  - by Dinesh Asanka

  Setting up a default column is a common task for  developers.  But, are we naming those default constraints explicitly? In the below  table creation, for the column, sys_DateTime the default value Getdate() will be allocated. CREATE TABLE SampleTable (ID int identity(1,1), Sys_DateTime Datetime DEFAULT getdate() ) We can check the relevant information from the system catalogs from following query. SELECT sc.name TableName, dc.name DefaultName, dc.definition, OBJECT_NAME(dc.parent_object_id) TableName, dc.is_system_named  FROM sys.default_constraints dc INNER JOIN sys.columns sc ON dc.parent_object_id = sc.object_id AND dc.parent_column_id = sc.column_id and results would be: Most of the above columns are self-explanatory. The last column, is_system_named, is to identify whether the default name was given by the system. As you know, in the above case, since we didn’t provide  any default name, the  system will generate a default name for you. But the problem with these names is that they can differ from environment to environment.  If example if I create this table in different table the default name could be DF__SampleTab__Sys_D__7E6CC920 Now let us create another default and explicitly name it: CREATE TABLE SampleTable2 (ID int identity(1,1), Sys_DateTime Datetime )   ALTER TABLE SampleTable2 ADD CONSTRAINT DF_sys_DateTime_Getdate DEFAULT( Getdate()) FOR Sys_DateTime If we run the previous query again we will be returned the below output. And you can see that last created default name has 0 for is_system_named. Now let us say I want to change the data type of the sys_DateTime column to something else: ALTER TABLE SampleTable2 ALTER COLUMN Sys_DateTime Date This will generate the below error: Msg 5074, Level 16, State 1, Line 1 The object ‘DF_sys_DateTime_Getdate’ is dependent on column ‘Sys_DateTime’. Msg 4922, Level 16, State 9, Line 1 ALTER TABLE ALTER COLUMN Sys_DateTime failed because one or more objects access this column. This means, you need to drop the default constraint before altering it: ALTER TABLE [dbo].[SampleTable2] DROP CONSTRAINT [DF_sys_DateTime_Getdate] ALTER TABLE SampleTable2 ALTER COLUMN Sys_DateTime Date   ALTER TABLE [dbo].[SampleTable2] ADD CONSTRAINT [DF_sys_DateTime_Getdate] DEFAULT (getdate()) FOR [Sys_DateTime] If you have a system named default constraint that can differ from environment to environment and so you cannot drop it as before, you can use the below code template: DECLARE @defaultname VARCHAR(255) DECLARE @executesql VARCHAR(1000)   SELECT @defaultname = dc.name FROM sys.default_constraints dc INNER JOIN sys.columns sc ON dc.parent_object_id = sc.object_id AND dc.parent_column_id = sc.column_id WHERE OBJECT_NAME (parent_object_id) = 'SampleTable' AND sc.name ='Sys_DateTime' SET @executesql = 'ALTER TABLE SampleTable DROP CONSTRAINT ' + @defaultname EXEC( @executesql) ALTER TABLE SampleTable ALTER COLUMN Sys_DateTime Date ALTER TABLE [dbo].[SampleTable] ADD DEFAULT (Getdate()) FOR [Sys_DateTime]

  Read the article

• SQL SERVER – How to easily work with Database Diagrams

  - by Pinal Dave

  Databases are very widely used in the modern world. Regardless of the complexity of a database, each one requires in depth designing. To practice along please Download dbForge Studio now.  The right methodology of designing a database is based on the foundations of data normalization, according to which we should first define database’s key elements – entities. Afterwards the attributes of entities and relations between them are determined. There is a strong opinion that the process of database designing should start with a pencil and a blank sheet of paper. This might look old-fashioned nowadays, because SQL Server provides a much wider functionality for designing databases – Database Diagrams. When using SSMS for working with Database Diagrams I realized two things – on the one hand, visualization of a scheme allows designing a database more efficiently; on the other – when it came to creating a big scheme, some difficulties occurred when designing with SSMS. The alternatives haven’t taken long to wait and dbForge Studio for SQL Server is one of them. Its functions offer more advantages for working with Database Diagrams. For example, unlike SSMS, dbForge Studio supports an opportunity to drag-and-drop several tables at once from the Database Explorer. This is my opinion but personally I find this option very useful. Another great thing is that a diagram can be saved as both a graphic file and a special XML file, which in case of identical environment can be easily opened on the other server for continuing the work. During working with dbForge Studio it turned out that it offers a wide set of elements to operate with on the diagram. Noteworthy among such elements are containers which allow aggregating diagram objects into thematic groups. Moreover, you can even place an image directly on the diagram if the scheme design is based on a standard template. Each of the development environments has a different approach to storing a diagram (for example, SSMS stores them on a server-side, whereas dbForge Studio – in a local file). I haven’t found yet an ability to convert existing diagrams from SSMS to dbForge Studio. However I hope Devart developers will implement this feature in one of the following releases. All in all, editing Database Diagrams through dbForge Studio was a nice experience and allowed speeding-up the common database designing tasks. Download dbForge Studio now. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL

  Read the article

• Announcement: Employee Info Starter Kit (v6.0–ASP.NET MVC Edition) is Released

  - by Mohammad Ashraful Alam

  Originally posted on: http://geekswithblogs.net/joycsharp/archive/2013/06/16/announcement-employee-info-starter-kit-v6.0asp.net-mvc-edition-is-released.aspxAfter a long wait, the next version of Employee Info Starter Kit is released! This starter kit is basically a project template that contains code samples targeting a specific technology, such as ASP.NET Web Form, ASP.NET MVC etc. Since its first release, this open source project gained a huge popularity in the developer community and had 250K+ combined downloads. This starter kit is honored to be placed at the official ASP.NET site, along with other asp.net starter kits, which all are being considered as the “best” ASP.NET coding standards, recommended by Microsoft. EISK is showcased in Microsoft’s Channel 9’s Weekly Show, as well. The ASP.NET MVC Edition of the new version 6.0 bundles most of the greatest and successful platforms, frameworks and technologies together, to enable web developers to learn and build manageable and high performance web applications with rich user experience effectively and quickly. User End Specifications Creating a new employee record Read existing employee records Update an existing employee record Delete existing employee records Role based security model Key Technology Areas ASP.NET MVC 4 Entity Framework 4.3.1 Sql Server Compact Edition 4 Visual Studio 2012 QuickStart Guide Getting started with EISK 6.0 ASP.NET is pretty easy. Once you've Visual Studio 2012 installed, then just follow the steps as provided below: Download the EISK 6.0 MVC version. Extract the file. From the extracted folder, click the solution file "Eisk.MVC-VS2012.sln". Right click the "Eisk.MVC" project node and select "Select set as StartUp Project". Hit Ctrl+F5 and explore! Architectural Overview Overall architecture is based on Model-View-Controller pattern Support for desktop & mobile browsers. Usage of Domain Model, Repository and Unit of Work pattern from Domain Driven Development approach Usage of Data Annotations in model (entity) classes to centralize basic validation mechanism that facilitates DRY principle Usage of IValidatableObject interface in model (entity) classes that isolates custom business logic from application layer Usage of OOP inheritance and Value Object pattern in model (entity) classes that provides reusability in application architecture Usage of View Model, Editor Model pattern that provides mechanism for testable view rendering logic Several helper classes and extension methods to enable developers build application with reduced code If you want to learn more about it in details, just check the following links: Getting Started - Hands on Coding Walkthrough – Technology Stack - Design & Architecture Enjoy!

  Read the article

• View the Real Links Behind Shortened URLs in Chrome

  - by Asian Angel

  When you encounter shortened URLs there is always that worry in the back of your mind about where they really lead to. Now you can get a “sneak peak” at the real links behind those URLs with the View Thru extension for Google Chrome. The URL Shortening services officially supported at this time are: bit.ly, cli.gs, ff.im, goo.gl, is.gd, nyti.ms, ow.ly, post.ly, su.pr, & tinyurl.com. Before When you encounter a shortened URL you are pretty much on your own in deciding whether to trust that link or not. It would really be nice if you could just hover your mouse over those links and know where they will lead ahead of time. After Once you have the extension installed you are ready to access that link viewing goodness. Please note that you will need to reload any pages that were open prior to installing the extension. For our first example we chose a shortened URL from “bit.ly”. As you can see the entire link behind the shortened URL is displayed very nicely…no hidden surprises there! Note: There are no options to worry with for the extension. Another perfect result for the “goo.gl URL” shown below. View Thru will certainly remove a lot of the stress related to clicking on shortened URLs. Bonus Find Just out of curiosity we looked for a shortened URL not listed as being officially supported at this time. We found one with the “http://nyti.ms/” domain and View Thru showed the link perfectly…so be sure to give it a try on other services too. Conclusion If you worry about where a shortened URL will really lead you then the View Thru extension can help alleviate that stress. Links Download the View Thru extension (Google Chrome Extensions) Similar Articles Productive Geek Tips See Where Shortened URLs “Link To” in Your Favorite BrowserVerify the Destinations of Shortened URLs the Easy WayCreate Shortened goo.gl URLs in Google Chrome the Easy WayCreate Shortened goo.gl URLs in Your Favorite BrowserAccess Google Chrome’s Special Pages the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job?

  Read the article

< Previous Page | 711 712 713 714 715 716 717 718 719 720 721 722  | Next Page >