Search Results

Search found 24734 results on 990 pages for 'floating point conversion'.

Page 718/990 | < Previous Page | 714 715 716 717 718 719 720 721 722 723 724 725  | Next Page >

• Disabling mouse acceleration in Mac OS X

  - by aib

  I've been looking for a solution to the unusable mouse problem in Mac OS X for ages. I've tried a gazillion programs and fiddled with every setting there is or there can be added. So far, I haven't found a way to get linear mouse response in Mac OS X. At this point I'm seriously considering installing another operating system. But before I do that, or go hacking around OS binaries, maybe someone here has a solution? I want linear mouse response. I want high sensitivity. I like my touchpad acceleration and would like to keep it if possible. Any ideas? P.S. I've been at this for a long time, I'll probably have already tried the most popular answers. I'm running Mac OS X 10.6.5 on a MacBook Pro. I don't use a particular brand of mouse. I'm not looking for any commercial solutions. I've tried: Mouse Acceleration Preferences Pane, the Snow Leopard version of which can get me close to a linear response, but at the cost of tracking speed (sensitivity). Answers on this question: Make Mac OS X mouse acceleration more Windows-like About every code snippet I found via Google.

  Read the article

• 2 Server FC SAN Configuration

  - by BSte

  I have 2 identical servers: -48GB Ram -8GigE NIC's -2FC NIC's -2x72GB RAID1 Hard Drives -Server 2008R2 Host I also Have a Fibre Channel SAN: -16x146GB RAID10 Hard Drives -2xDual-port FC Controllers (Controller A and B both have ports 1 and 2) -Server 1 has Fiber to Ports A1 and B1 -Server 2 has Fiber to Ports A2 and B2 -I kept the default config with 1 Virtual Disk and 1 Volume -The default mappings show ports A1,A2,B1,B2 on LUN 0 with read-write My goal is: -2xVM's with IIS and Guest Level Failover -2xVM's with SQL 2008 Enterprise using a Single DB and Guest Level Failover -1xVM that is an application server, preferable with Host Failover. From what I read, this will also need AD for clustering to work. -I need at least 1 VM always running for IIS and the SQLDB. This includes hardware failover and application (ie: reboot a VM for Critical updates) I was told I could install the VM's and run them from the SAN, and this is what I've tried: Installed MPIO and HyperV on Server1 and Server 2 Added the SAN as Disk E: on both servers, made it GPT and formatted NTFS Configured HyperV on both server to store use E:\VD and E:\VHD On server1, I was able to install 3 VM's on the SAN and all worked well. On server2, I would start installing the other 2 VM's, but always at some point the VM's would get a corrupt .VHD message (either server). Everything I found about the message typically related to antivirus, so I removed all antivirus on both Host servers (now only running 2008R2). I reformatted drive E: (SAN), recreated the VHD and VD directories, installed 3 VM's on Server 1, and then had the same issue when installing VM's on Server2. Obviously something is wrong, but I'm not certain what exactly. My questions: 1) Are my goals possible with this hardware setup? -I've read 2008R2 supports FC SAN's, but a lot of articles seem to only give examples with iSCSCI setups 2) What would be the suggested route on setting up the SAN (disks,volumes,LUN's)? I've worked with HyperV on a single machine before and never had issues. Actual experience working on SAN's and clustering is new to me. Any suggestions or recommendations to get me in the right direction would be much appreciated.

  Read the article

• How do I fix this Windows 7 wireless connectivity issue?

  - by Charles Randall

  I have a laptop with an Intel Wireless Centrino 6300 module. Recently, the machine has stopped properly connecting to my wireless router. It will get stuck in a loop of connecting, then disconnecting and reconnecting. While connected, it will simply say "No Internet Access." Running inSSIDer 2.0, it shows my network jumping around between two channels -- I know this isn't the case, because I've set my router to sit on one single channel. My MacBook Pro, Boxee Box, PS3, and Xbox 360 all connect fine to the wireless and have no problems at all. I know it's not the wireless module, as I bought a second one recently assuming the first had died -- but I get the same behavior with both. Sometimes, I can fix the issue temporarily by deleting the network (Using the Manage Wireless Networks page), and then re-adding it (via standard wireless methods). Then it will work for a few days. But inevitably the problem comes back, and now the laptop simply won't connect to the wireless at all, even if I take steps that usually work. Since I've ruled out the hardware, and it's unlikely some kind of interference issue (because I would expect to see it on any multitude of other devices), I would think at this point that it's a problem with Windows itself. One thing that might be a hint, even though I delete the network, when I add it again, it's always listed as "Wireless Network Connection 2" even though there isn't another in the list.

  Read the article

• When I log on to my company desktop, I log on to a domain. How is this domain name installed?

  - by learnerforever

  Hi, When I have to work on my machine in company, I have noticed that I log on to a domain (named on the basis of company name) and not really on that computer. From, what I understand, this has a few advantages, the primary being that I just need one password for the domain and can work through any of the machines in company. My questions are : What software on desktop/network have to be installed so that the desktop recognizes and gives me option of logging into a domain. I would guess that a software can be installed on desktop, and there we can configure the IP address of domain server of company and port number, which handles authentication. Is this correct? This takes me to another question that how are softwares installed on end machines in a company. Going to each machine physically and installing looks very unweildy from administrator point of view. An obvious solution would be to install softwares (and updates) over network. My question on this are: What protocols,keywords come into picture when administrator installs OS,softwares,updates from his administrator machine to end machine through network. Thanks,

  Read the article

• Python easy_install confused on Mac OS X

  - by slf

  environment info: $ echo $PATH /opt/local/bin:/opt/local/sbin:/sw/bin:/sw/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/usr/X11R6/bin:/opt/local/bin:/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin:~/.utility_scripts $ which easy_install /usr/bin/easy_install specifically, let's try the simplejson module (I know it's the same thing as import json in 2.6, but that isn't the point) $ sudo easy_install simplejson Searching for simplejson Reading http://pypi.python.org/simple/simplejson/ Reading http://undefined.org/python/#simplejson Best match: simplejson 2.1.0 Downloading http://pypi.python.org/packages/source/s/simplejson/simplejson-2.1.0.tar.gz#md5=3ea565fd1216462162c6929b264cf365 Processing simplejson-2.1.0.tar.gz Running simplejson-2.1.0/setup.py -q bdist_egg --dist-dir /tmp/easy_install-Ojv_yS/simplejson-2.1.0/egg-dist-tmp-AypFWa The required version of setuptools (>=0.6c11) is not available, and can't be installed while this script is running. Please install a more recent version first, using 'easy_install -U setuptools'. (Currently using setuptools 0.6c9 (/System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python)) error: Setup script exited with 2 ok, so I'll update setuptools... $ sudo easy_install -U setuptools Searching for setuptools Reading http://pypi.python.org/simple/setuptools/ Best match: setuptools 0.6c11 Processing setuptools-0.6c11-py2.6.egg setuptools 0.6c11 is already the active version in easy-install.pth Installing easy_install script to /usr/local/bin Installing easy_install-2.6 script to /usr/local/bin Using /Library/Python/2.6/site-packages/setuptools-0.6c11-py2.6.egg Processing dependencies for setuptools Finished processing dependencies for setuptools I'm not going to speculate, but this could have been caused by any number of environment changes like the Leopard - Snow Leopard upgrade, MacPorts or Fink updates, or multiple Google App Engine updates.

  Read the article

• IIS6 Multiple SSL websites to a single HTTP website?

  - by docflabby

  Running a IIS6 server on Windows 2003. All the websites use ASP.NET I have a number of websites all running separate HTTP websites: www.domain1.com www.domain2.com www.domain3.com I have a separate HTTPS website www.secure.com These websites are all running on the same server. I now wish to intergrate the content of www.secure.com into each of the domains in a transparent way. Such that each website despite having its own SSL connection displays the same website. The complicatrion is www.secure.com needs to know which website the connection has come from to apply the appropriate branding. The idea behind this is to have only one website, and location, but it keeps the core website brand. https://domain1.com looks alot better from a marketing point of view (and avoids users getting confused about what our secure website is) SSL www.domain1.com/secure - displays www.secure.com (branded domain1) SSL www.domain2.com/secure - displays www.secure.com (branded domain2) SSL www.domain3.com/secure - displays www.secure.com (branded domain3) How would the best way of achieving this, i'm open to using additional software if necessery. Would a reverse proxy be sutible for this situation?

  Read the article

• How do I Setup Multiple Sites in HostGator Shared Hosting?

  - by cillosis

  I recently decided to consolidate all of my random projects into a single hosting account as it was starting to get very expensive to run each on an individual hosting plan. I purchased the HostGator Baby plan which allows hosting of multiple domains. You have to set it up with a root domain name which is fine (I used my portfolio domain name). As far as file structure, I wanted a folder for each site in /public_html so the structure looks like this: - public_html/ - myportfolio.com/ - ... my files ... - anothersite.com/ - ... my files ... - thirdsite.com/ - ... my files ... I setup add-on domains and pointed them to their respective folders which works fine. My problem is the root domain ex. myportfolio.com expects it's files to be contained at the root of /public_html rather than within it's folder I created. I setup a redirect to point requests for myportfolio.com to myportfolio.com/myportfolio.com/ which works initially except (at least in my WordPress installation) it still references it's root folder as public_html. TL;DR; What is the best way to go about setting up multiple site hosting in a shared hosting environment (i.e. I can't setup vhosts). Does anybody know of any tutorials or videos that walk through this more clearly? Thanks.

  Read the article

• How does Subnetting Work?

  - by Kyle Brandt

  How does Subnetting Work, and How do you do it by hand or in your head? Can someone explain both conceptually and with several examples? Server Fault gets lots of subnetting homework questions, so we could use an answer to point them to on Server Fault itself. What is classless routing and why is class-based routing obsolete? If I have a network, how do I figure out how to split it up? If I am given a netmask, how do I know what the network Range is for it? Sometimes there is a slash followed by a number, what is that number? Sometimes there is a subnet mask, but also a wildcard mask, they seem like the same thing but they are different? Someone mentioned something about knowing binary for this? Not looking for links to other sites (unless maybe you have one post with a bunch of good ones). I already know how to subnet, I just thought it would be nice if Server Fault had a generic subnetting answer.

  Read the article

• monitoring a /21 for potential bad guys with snort and port mirroring

  - by Adeodatus

  Hi all, I want/need to start monitoring our network a bit better. Its an odd network in that it comprises 2 /22 public IPs and a slew of private admin IPs. I do have one point in the network where it all comes together and I can turn on port mirroring on the catalyst. From that port, I'd like to turn up a box running various utilities. Snort is high on my list but it'd be nice to also get some networking statistics with something like Netflow. So, what are peoeple's thoughts. I can turn up a box needed for this with a bit of ease. We have the hardware available. What should I run? I'd love to know what kind of nasty things are potentially going on but I'd also like to see statistics on what people are doing on the network so I can better tweak our systems to handle it better and improve performance. I'm open so please, give me some ideas to go along with what I've got.

  Read the article

• Problems with freetype on OSX 10.7.4

  - by eythor

  I'm trying to install mplayer with OSD using homebrew. I've added both --enable-menu and --with-freetype-config=/usr/local/Cellar/freetype/2.4.10/freetype-config to the brew recipe. ==> Downloading http://www.mplayerhq.hu/MPlayer/releases/MPlayer-1.1.tar.xz Already downloaded: /Library/Caches/Homebrew/mplayer-1.1.tar.xz xz -dc "/Library/Caches/Homebrew/mplayer-1.1.tar.xz" | /usr/bin/tar xf - ==> ./configure --prefix=/usr/local/Cellar/mplayer/1.1 --cc=cc --host-cc=cc --disable-cdparanoia --disable-libopenjpeg --enable-menu --disable-x11 -- with-freetype-config=/usr/local/Cellar/freetype/2.4.10/freetype-config ./configure --prefix=/usr/local/Cellar/mplayer/1.1 --cc=cc --host-cc=cc --disable-cdparanoia --disable-libopenjpeg --enable-menu --disable-x11 --with -freetype-config=/usr/local/Cellar/freetype/2.4.10/freetype-config Checking for cc version ... clang 4.2.1 (experimental support only) Checking for working compiler ... yes Detected operating system: Darwin Detected host architecture: x86_64 Checking for cross compilation ... no Checking for host cc ... cc Checking for CPU vendor ... GenuineIntel (6:15:10) Checking for CPU type ... Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz For freetype-config I've tried three seperate paths; /usr/X11R6/bin/freetype-config, /usr/X11/bin/freetype-config and the one in Cellar. Checking for freetype always fails: Checking for freetype >= 2.0.9 ... no Checking for fontconfig ... no (FreeType support needed) Although freetype itself seems to be installed. mufasa:bin eythor$ freetype-config --version 15.0.9 mufasa:bin eythor$ freetype-config --ftversion 2.4.10 mufasa:bin eythor$ freetype-config --libs -L/usr/local/Cellar/freetype/2.4.10/lib -lfreetype -lz -lbz2 mufasa:bin eythor$ freetype-config --cflags -I/usr/local/Cellar/freetype/2.4.10/include/freetype2 - I/usr/local/Cellar/freetype/2.4.10/include I'm not sure what to try next or how to figure out why freetype isn't recognized. Can anyone point me in a sensible direction?

  Read the article

• Default or fink python and lxml under 10.6.8

  - by songdogtech

  Ah, confusion. I'm trying to install a python library called lxml as needed by a python script. I've been through numerous SU quesitons and answers. I haven't been able to make much progress. I run easy_install lxml and get: Processing lxml-3.0.1-py2.6-macosx-10.6-universal.egg lxml 3.0.1 is already the active version in easy-install.pth Using /Library/Python/2.6/site-packages/lxml-3.0.1-py2.6-macosx-10.6-universal.egg Processing dependencies for lxml Finished processing dependencies for lxml but when I run my script, I get: File "scraper.py", line 3, in import lxml.html File "/Library/Python/2.6/site-packages/lxml-3.0.1-py2.6-macosx-10.6-universal.egg/lxml/html/init.py", line 42, in from lxml import etree ImportError: dlopen(/Library/Python/2.6/site-packages/lxml-3.0.1-py2.6-macosx-10.6-universal.egg/lxml/etree.so, 2): Symbol not found: _htmlParseChunk Referenced from: /Library/Python/2.6/site-packages/lxml-3.0.1-py2.6-macosx-10.6-universal.egg/lxml/etree.so Expected in: flat namespace in /Library/Python/2.6/site-packages/lxml-3.0.1-py2.6-macosx-10.6-universal.egg/lxml/etree.so I think that maybe I'm not using the correct python install? I've installed python with fink, but should I use OS X's python? This is in my .profile: test -r /sw/bin/init.sh && . /sw/bin/init.sh which points to the fink install. echo $PATH gives me: /sw/bin:/sw/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/usr/X11R6/bin Should I change that to point to snow leopard's python? (Which is 2.6.1) In Library/, there is: which are the lxml libaries I need, it appears, as well as requests. And whereis python gives me /usr/bin/python What do I do? How do I get python to use these libraries. And which python?

  Read the article

• Localhost problems on Mac OS X 10.7

  - by Maya

  Sorry for the duplicate post ( http://stackoverflow.com/questions/9720871/localhost-problems-on-mac-os-x-10-7 ), but I got the advice that this is a better place to ask my question: I want to access a mysql server remotely over ssh. So I used port forwarding to access the remote 3306 port on my localhost as 8383. The ssh connection can established successfully. But when I want to telnet onto port 8383 on localhost I get the following error: ~: telnet 127.0.0.1 8383 Trying 127.0.0.1... telnet: connect to address 127.0.0.1: Connection refused telnet: Unable to connect to remote host I tried the same on a friends Laptop (also Mac OS X 10.7) and it worked fine, so it is very unlikely that the ssh connection is the problem. I assume it has something to do with my local network configuration. I turned off IPv6, just in case. My /etc/hosts looks like this: 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost I would greatly appreciate any help. Please point me in the right direction if this is not the right place to ask this question.

  Read the article

• Windows 7 Backup - Does the "system image" include all the files on my drive?

  - by Vaccano

  I have a new Dell Laptop that I have setup the way I like it. I want to use Windows 7 to do a backup and then restore that backup on a different hard drive (solid state). When I setup the backup info (manually) for Windows 7 Backup there is a little checkbox at the the bottom that says: Include a system image of drives: RECOVERY, OS (C:) I can also select to backup all my data on the C: drive (the only hard drive I have anything on) as well as some libraries (which are on my C: drive so no point in selecting those). The question I have is, does Windows 7 Backup just somehow know what needs to be restored (ie program files and Windows and the registry ....? Or is it really making a full restorable copy of the C: drive? (If the later is true then I don't need select the C: drive to be "backed up" if I don't plan to access the files except by restoring them right? (Because the system image will already have it all.)) So, which way is it? What is saved in the System Image?

  Read the article

• How powerful of a PC do you need to edit HD videos?

  - by Xeoncross

  I have a Core2Quad Q8200 (2.3GHz) with 4GB of RAM, a 512MB PCIe video card, and a SATA-2 HD. Yet it still isn't fast enough to edit 720i/p video in Sony Vegas or Adobe Premiere/Aftereffects. My RAM usage never peaks over 1.6GB, but my CPU cores make it to 95% quick! Right now the preview panes in all these programs lag to bad to actually work on the videos. I get to see 1-3 frames every second or two! So how fast do I have to go? At what point will my CPU be fast enough to actually edit these videos? I have to assume that regular people and their regular sub $2k computers can actually work with this footage. Another way to answer this is, how fast is the PC you used to edit videos? Update: I'ts worth noting that now that I have Adobe Pre/AF CS4 I am more interested in getting that working than my older Vegas 6. If you didn't have to re-run RAM preview every, single, time you made one change it would be my answer. But since I like to test many filters and effects before choosing one - I have to re-render a 1-sec section of footage over-and-over and it drives me nuts waiting. Perhaps a motherboard with Dual Xeon chips or something would be able to handle this. It would probably be as much as a dual-crossfire setup and would also speed up other applications.

  Read the article

• What is the advantage of not running as root? [closed]

  - by Shmuel Brill

  Possible Duplicate: What's wrong with always being root? All modern brands of Linux highly discourage (or disable) one from running as root instead of a normal user. I do not understand why. As a "normal" user, one could Download a rouge program from the internet. Run it (After all, one isn't root, what can it do). It installs itself in .bashrc or .xinitrc It writes a rouge "sudo" and "su" and adds . to the path Not noticing that . is in path, one runs sudo. The rouge program now has root password and can do anything it wants in the system. Even if 3-6 doesn't happen, the program could still Be part of a botnet. Read all files in the home directory and send them back (mine for SS#, Credit Card numbers, bank account numbers, etc). Send spam. Run a backdoor server to allow an attacker a chance to connect to the machine to determine vulnerabilities. It seems that the whole "permissions" thing (root/non-root) is just to prevent amateur crackers from getting into the system, so the question is: Is there a point in avoiding running as root, and is there a way to protect oneself if one wants to run unsafe code?

  Read the article

• SSH public key authentication -- always require users to generate their own keypair?

  - by schinazi

  I was working with a partner today that I needed to upload files to my server using scp. I have passwords turned off in the server's SSH configuration, so I wanted them to use public key authentication. I generated the keypair for them on the server and gave them the private key and put the public key in the appropriate authorized_keys file. After a bunch of problems with them setting up their job, they finally got a more experienced sysadmin involved on their end, and he scolded me for handling the key generation this way. He said that by giving them a private key generated on my system, I had enabled them to do a brute-force attack against other keys generated on the same server. I even asked him "so if I have an account on a server, and I can log in with a password but I want to automate something and I generate a keypair on that system, does that then give me an attack vector for brute forcing other users' keys?" and he said yes. I've never heard of this, is it true? Can anyone point me to a discussion of this attack? Thanks in advance.

  Read the article

• switchless Infiniband between two servers on RHEL 6.3

  - by exfizik

  I have 2 servers running RHEL 6.3 which have 2 port Infiniband cards >lspci | grep -i infini 07:00.0 InfiniBand: QLogic Corp. IBA7322 QDR InfiniBand HCA (rev 02) I'm interested in connecting them directly to each other bypassing an Infiniband switch (which I don't have). Quick googling showed that at least in some configurations it's possible. I installed all RedHat Infiniband packages with yum groupinstall "Infiniband Support". However, ibv_devinfo shows that both ports in each card are down, which indicates that cables are not connected. But the cable is connected, although the LEDs are off on the cards (not a good sign). Another source of confusion for me is that according to this, RedHat doesn't come with OFED packages and I'm slightly hesitant to install them from source due to the lack of RedHat support for them... So where am I going with this? The questions I have are: is it possible to have a switchless/direct Infiniband connection between two servers the way I described above? If it's possible, do I have to use the OFED packages or can I configure everything with just the packages coming with RHEL. Why are the LEDs off on my servers even though the cable is connected? Any additional input/advice/pointers would be appreciated. P.S. I followed this guide for installation instructions. The Infiniband cards are clearly recognized by my OS and the rdma service is running. Update: I have opensm installed. When I run it it says: OpenSM 3.3.13 Command Line Arguments: Log File: /var/log/opensm.log ------------------------------------------------- OpenSM 3.3.13 Entering DISCOVERING state Using default GUID 0x1175000076e4c8 SM port is down and stays at that point.

  Read the article

• Time drift in Cloud Server - need to mainpulate GRUB config

  - by Aditya Advani

  We are hosting a VPS on a popular host and are experiencing a regular time drift of several minutes a day forward (approx 7). Linux Kernel: 2.6.18-164.11.1.el5 GNU/Linux Distro: CentOS release 5.4 (Final) We reached out to our hosting provider and their support advised us " This is a known issue with Cloud Servers. To fix this you will need to add one line to your grub config located at: /boot/grub/menu.lst The line you need to add is: noapic nolapic divider=10 nolapic_timer This should correct this issue. You will need to restart after this is added in. " Because I am wary of manipulating grub, mostly I'm terrified that our server may fail to restart - I ask you guys, the pro *nix admins - where exactly in this file does the recommended insertion below: # line from 1&1 for time syncing issue (Case 5163) noapic nolapic divider=10 nolapic_timer go? Please specify where exactly, and whether the order of commands is or is not important. Why is the block below "title CentOS ..." indented? If someone could give me an overview of how this works or point me to a resource that's easy to follow, that's what I'm looking for immediately, a light overview or basic understanding of what I;m doing. If GRUB and bootloaders are a deep dark treasure trove of kernel hacking or something, that's great well-recommended in-depth resources are also very welcome. This is my current /boot/grub/menu.lst # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file #boot=/dev/sda # serial --unit=0 --speed=57600 terminal --timeout=5 serial console timeout=5 title CentOS (2.6.18-164.11.1.el5) root (hd0,0) kernel /boot/vmlinuz-2.6.18-164.11.1.el5 ro root=/dev/hda1 console=tty0 console=tty initrd /boot/initrd-2.6.18-164.11.1.el5.img MOST IMPORTANT: I need to know where in the file above it is appropriate to paste the suggested line so I can confidently restart my VPS after manipulating GRUB config

  Read the article

• How to update the hard disk device drivers for a ghosted hard drive image so it can run on different hardware: Ultra ATA > SATA

  - by rism

  I've ghosted a Winxp machine from one laptop with Ultra ATA drive, and would like to set it up on another laptop as a multiboot option on another hard driver with a SATA drive. I can install the partition fine but if i make it active and try to boot it it blue screens. The blue screen is so fast i cant even read it, other than to make out it's saying "something", im picking probably hard drive as it goes through POST fine. So basically i would like to boot into my Win7 OS, and then somehow manipulate the XP partition to use updated drivers for the new hard drive/laptop so that i can then at least boot into the XP OS on the new machine and update all the other drivers in safe mode or whatever to get it to run. I assume someone is going to tell me to just do a fresh install, but that kinda defeats the purpose of ghosting at this point. There is a significant amount of personalisation, development setup on the XP machine that i would like to just transfer as is. As it stands ive invested minmal time in getting it to run, just a ghost and recovery and then a blue screen boot or two, so its still well worth it to me, time wise to try this way. Thanks.

  Read the article

• Windows Vista will not boot; the file header checksum does not match the computed checksum

  - by Magnus

  Right out of the blue, my wife's Sony Vaio stopped booting. This, not so fun, error message displays immediately after POST: The system cannot boot. The file is possibly corrupt. The file header checksum does not match the computed checksum The repair option on the Vista DVD says everything is fine and dandy, it couldn't be more happier or more clueless... Any ideas? Update: CHKDSK reports no issues. CHKDSK /r reports no issues. (Heck, both Windows Repair and CHKDSK could just as well tell me that I have won on lottery or that the earth is flat... ) Some have reported that a mem diagnostic could help, but for me the mem diag has just ran through 5 passes. It doesn't seem to help. According to Sony, pressing F10 should bring up the restore menu, but it doesn't, the error pops up straight after Bios POST. It seems that this error is first in line of all options at this point, and is doesn't put a smile on my face. I have attached an external USB drive and copied all user data/documents to it. I feel an OS re-install is around the corner.

  Read the article

• PHP 5.3 on IIS gives 404 error in CGI mode

  - by reinier

  Slowly losing my mind here. I had PHP 5.2 working fine (ISAPI) under IIS, but for some extension I needed 5.3. So no worries, I installed this but it turns out ISAPI is not supplied anymore. I followed the install tutorials for fastcgi and ended up with a 500 internal server error for every PHP page served. So my current situation is: I have fastcgi removed. In my websites I have added PHP (head, get, post) and routed them to c:\php\php-cgi.exe. Result: every PHP page I try (even the ones with just text) gives 404 not found error. Any HTML file I put in the same folder, serves without a hitch. Who can help me please... How hard can something like this be right? For me apparently very hard. Extra information: ran the installer as suggested below. Set it to use fastcgi. my fcgiext.ini file looks like this now: [types] php=c:\php\php-cgi.exe [c:\php\php-cgi.exe] exepath=c:\php\php-cgi.exe from the command-line a 3 line PHP file with just phpinfo(); works fine from the server the same PHP file with just phpinfo(); results in the internal server 500 error. from the server a PHP file with just text works fine when changing the document types in IIS management console and point the PHP extension directly to c:\php\php-cgi.exe results in 404 for every PHP file the php.ini is the php.ini.production file which came in the distribution. No edits were made. Setting the IIS PHP handler directly to PHP (not via fastcgi) c:\php\php-cgi.exe results in the following: display a PHP page with only text....works fine display a page with only phpinfo(); results in 404 not found

  Read the article

• SQL Server Express Failed to Install

  - by JasCav

  I am attempting to install SQL Server Express (as part of the Visual Studio 2010 Professional installation), but it is failing. I am receiving this error log. [06/22/11,16:31:39] Microsoft Visual Studio 2010 Professional - ENU: [2] UpdateFileFetcherFromMsi: Warning: Missing fwlink entry for cabinet: #SP.cab [06/22/11,16:31:40] setup.exe: [2] Duplicate module ID: {0AFE11CA-57AA-4F66-90BE-284F0F3A5ABD} [06/22/11,16:32:12] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/22/11,16:32:12] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/22/11,16:32:12] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/22/11,17:07:55] Microsoft Visual Studio 2010 Professional - ENU: [2] UpdateFileFetcherFromMsi: Warning: Missing fwlink entry for cabinet: #SP.cab [06/22/11,17:07:55] setup.exe: [2] Duplicate module ID: {0AFE11CA-57AA-4F66-90BE-284F0F3A5ABD} [06/23/11,10:39:33] Microsoft Visual Studio 2010 Professional - ENU: [2] UpdateFileFetcherFromMsi: Warning: Missing fwlink entry for cabinet: #SP.cab [06/23/11,10:39:33] setup.exe: [2] Duplicate module ID: {0AFE11CA-57AA-4F66-90BE-284F0F3A5ABD} [06/23/11,10:40:22] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/23/11,10:40:22] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/23/11,10:40:22] setup.exe: [2] Duplicate component in install order: SQL EULAs [06/23/11,10:53:48] Microsoft Visual Studio 2010 Professional - ENU: [2] UpdateFileFetcherFromMsi: Warning: Missing fwlink entry for cabinet: #SP.cab [06/23/11,10:53:48] setup.exe: [2] Duplicate module ID: {0AFE11CA-57AA-4F66-90BE-284F0F3A5ABD} [06/23/11,13:19:26] Microsoft Visual Studio 2010 Professional - ENU: [2] UpdateFileFetcherFromMsi: Warning: Missing fwlink entry for cabinet: #SP.cab [06/23/11,13:19:26] setup.exe: [2] Duplicate module ID: {0AFE11CA-57AA-4F66-90BE-284F0F3A5ABD} [06/23/11,16:47:36] Microsoft SQL Server 2008 Express Service Pack 1 (x64): [2] Error code -2068643839 for this component is not recognized. [06/23/11,16:47:36] Microsoft SQL Server 2008 Express Service Pack 1 (x64): [2] Component Microsoft SQL Server 2008 Express Service Pack 1 (x64) returned an unexpected value. ***EndOfSession*** I'm reading various articles which point towards something being wrong in the register, but I can't find anything specific. Any suggestions for what I can do to fix this?

  Read the article

• "A disk read error occurred" when booting XP disk image in VirtualBox

  - by intuited

  I'm trying to boot an XP installation cloned into VirtualBox from a real drive. I'm getting the message A disk read error occurred Press Ctrl+Alt+Del to restart whenever* I try to boot the machine. * This is not strictly true: with AMD-V enabled, the boot process appears to not make it this far and instead hangs at a black screen with cursor. I created the VirtualBox image from the original drive using the following method: $ sudo ddrescue -n /dev/sdd sdd.img logfile # completed without errors $ VBoxManage convertfromraw sdd.img disk.vdi The original disk (and the image) contain a single NTFS partition with XP installed on it. The owner of the drive indicates that it did boot okay the last time the system made it that far. The (Pentium 4) system has a broken (enormous) heat sink, so at some point it failed to boot because it would quickly overheat and shut down. If I boot the VM from a live cd, I am able to mount its /dev/sda1 without any problems. I ran ntfsfix and didn't have any luck. I've read through the instructions on doing this. I didn't really follow them. For example, I didn't run MergeIDE before imaging because the machine was not bootable. However, the symptom of that problem seems to be quite different. The emitted message is contained in the volume boot record of the XP partition, which leads me to suspect that this is a problem with the core operating system bootstrap procedure, and not related to anything in the registry. I don't have an XP boot CD.

  Read the article

• NRPE unable to read output, but why?

  - by ticktockhouse

  I have this problem with NRPE, all the stuff I've found so far on the net seems to point me at things I've already tried. # /usr/local/nagios/plugins/check_nrpe -H nrpeclient gives NRPE v2.12 as expected. Running the command by hand (as defined in nrpe.cfg on "nrpeclient", gives the expected response nrpe.cfg: command[check_openmanage]=/usr/lib/nagios/plugins/additional/check_openmanage -s -e -b ctrl_driver=0 bat_charge "Expected response" But if I try to run the command from the Nagios server I get the following: # /usr/local/nagios/plugins/check_nrpe -H comxps -c check_openmanage NRPE: Unable to read output Can anyone think of anywhere else I might have made a mistake with this? I've done the same thing on multiple other servers with no problem. The only difference I can think of with this is that this box is RHEL 5 based, whereas the others are RHEL 4 based. Those two bits above that I've tested are the what most people seem to suggest when people have had this problem. I should mention that I get a weird error in the logs when I restart nrpe: nrpe[14534]: Unable to open config file '/usr/local/nagios/etc/nrpe.cfg' for reading nrpe[14534]: Continuing with errors... nrpe[14535]: Starting up daemon nrpe[14535]: Warning: Daemon is configured to accept command arguments from clients! nrpe[14535]: Listening for connections on port 5666 nrpe[14535]: Allowing connections from: bodbck,combck,nam-bck Even though, it's plainly reading that /usr/local/nagios/etc/nrpe.cfg file to get the stuff it's talking about further down..

  Read the article

• Error with Apache, Nagios and Snorby integration

  - by user1428366

  I'm trying to use apache to serve two different websites (Nagios and Snorby). The problem is that when I try to see the "/snorby" website, apache sends me the "It works" page. If I try to access to "/nagios" it works perfectly. Snorby is running under ruby passenger .This are the config files. <VirtualHost *:80> ScriptAlias /nagios/cgi-bin "/srv/nagios/sbin" <Directory "/srv/nagios/sbin"> # SSLRequireSSL Options ExecCGI AllowOverride None Order allow,deny Allow from all # Order deny,allow # Deny from all # Allow from 127.0.0.1 AuthName "Nagios Access" AuthType Basic AuthUserFile /srv/nagios/etc/htpasswd.users Require valid-user </Directory> Alias /nagios "/srv/nagios/share" <Directory "/srv/nagios/share"> # SSLRequireSSL Options None AllowOverride None Order allow,deny Allow from all # Order deny,allow # Deny from all # Allow from 127.0.0.1 AuthName "Nagios Access" AuthType Basic AuthUserFile /srv/nagios/etc/htpasswd.users Require valid-user </Directory> </VirtualHost> And the other one is this: <VirtualHost *:80> #Alias /snorby "/var/www/snorby-2.6.0/public" # !!! Be sure to point DocumentRoot to 'public'! DocumentRoot /var/www/snorby-2.6.0/public <Directory /var/www/snorby-2.6.0/public> # This relaxes Apache security settings. AllowOverride all # MultiViews must be turned off. Options -MultiViews </Directory> </VirtualHost> If I disable the Nagios webpage, the Snorby webpage works. I think the problem is Snorby because when I try to access to the Ip address with Nagios page disable, the webapplication redirects me to http:// myserverip/dashboard. Can anyone help me please? Thank you so much! Regards

  Read the article

< Previous Page | 714 715 716 717 718 719 720 721 722 723 724 725  | Next Page >