Search Results

Search found 2733 results on 110 pages for '02 javafx'.

Page 72/110 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Unable to transfer data to or from mounted hard drive

  - by user210335

  So usually i'm good at sorting out issues. But this one has me at a loss! This issues has occured since upgrading my ubuntu so this was workingg prior. I use mounted hard drives to manage my downloads which are then copied over accordingly by a python based app. I found it was having issues with permissions to create anything on these mounted hard drives. I'm able to play and access he content of these drives so they're not faulty. My mount script looks like the following rw,user,exec,auto I really am stuck. Could anyone shed any light on how to fix this and allow me to access it. I've checked the properties and all groups should have read and write access so i'm very confused! thanks, edit here's the output of my mount options /dev/sda2 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/cgroup type tmpfs (rw) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /sys/firmware/efi/efivars type efivarfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) none on /sys/fs/pstore type pstore (rw) /dev/sda1 on /boot/efi type vfat (rw) /dev/sdc1 on /mnt/tv type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sdb1 on /mnt/B88A30E88A30A4B2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd) gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=simon) /dev/sdd1 on /media/simon/New Volume3 type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096) the main mount in question is /dev/sdc1 on /mnt/tv type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) heres my dmesg output. I tried cchanging permissions in a terminal and I got an io error. [52803.343417] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.343420] sd 2:0:0:0: [sdc] CDB: [52803.343422] Read(10): 28 00 00 60 9e 3f 00 00 08 00 [52803.343805] sd 2:0:0:0: [sdc] Unhandled error code [52803.343808] sd 2:0:0:0: [sdc] [52803.343810] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.343812] sd 2:0:0:0: [sdc] CDB: [52803.343813] Read(10): 28 00 00 67 64 67 00 00 08 00 [52803.344389] sd 2:0:0:0: [sdc] Unhandled error code [52803.344392] sd 2:0:0:0: [sdc] [52803.344394] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.344396] sd 2:0:0:0: [sdc] CDB: [52803.344397] Read(10): 28 00 09 bd e7 6f 00 00 08 00 [52803.344584] sd 2:0:0:0: [sdc] Unhandled error code [52803.344587] sd 2:0:0:0: [sdc] [52803.344589] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.344591] sd 2:0:0:0: [sdc] CDB: [52803.344592] Read(10): 28 00 07 3a cf b7 00 00 08 00 [52803.344776] sd 2:0:0:0: [sdc] Unhandled error code [52803.344779] sd 2:0:0:0: [sdc] [52803.344781] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.344783] sd 2:0:0:0: [sdc] CDB: [52803.344784] Read(10): 28 00 09 bd e7 97 00 00 08 00 [52803.344973] sd 2:0:0:0: [sdc] Unhandled error code [52803.344976] sd 2:0:0:0: [sdc] [52803.344978] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.344980] sd 2:0:0:0: [sdc] CDB: [52803.344981] Read(10): 28 00 08 dd 57 ef 00 00 08 00 [52803.346745] sd 2:0:0:0: [sdc] Unhandled error code [52803.346748] sd 2:0:0:0: [sdc] [52803.346750] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.346752] sd 2:0:0:0: [sdc] CDB: [52803.346754] Read(10): 28 00 07 1a c1 0f 00 00 08 00 [52803.349939] sd 2:0:0:0: [sdc] Unhandled error code [52803.349942] sd 2:0:0:0: [sdc] [52803.349944] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.349946] sd 2:0:0:0: [sdc] CDB: [52803.349948] Read(10): 28 00 00 67 64 9f 00 00 08 00 [52803.350147] sd 2:0:0:0: [sdc] Unhandled error code [52803.350150] sd 2:0:0:0: [sdc] [52803.350152] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.350154] sd 2:0:0:0: [sdc] CDB: [52803.350155] Read(10): 28 00 00 67 64 97 00 00 08 00 [52803.351302] sd 2:0:0:0: [sdc] Unhandled error code [52803.351305] sd 2:0:0:0: [sdc] [52803.351307] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.351309] sd 2:0:0:0: [sdc] CDB: [52803.351311] Read(10): 28 00 00 a4 1d cf 00 00 08 00 [52803.351894] sd 2:0:0:0: [sdc] Unhandled error code [52803.351897] sd 2:0:0:0: [sdc] [52803.351899] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.351901] sd 2:0:0:0: [sdc] CDB: [52803.351902] Read(10): 28 00 00 67 67 3f 00 00 08 00 [52803.353163] sd 2:0:0:0: [sdc] Unhandled error code [52803.353166] sd 2:0:0:0: [sdc] [52803.353168] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.353170] sd 2:0:0:0: [sdc] CDB: [52803.353172] Read(10): 28 00 00 67 64 ef 00 00 08 00 [52803.353917] sd 2:0:0:0: [sdc] Unhandled error code [52803.353920] sd 2:0:0:0: [sdc] [52803.353922] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.353924] sd 2:0:0:0: [sdc] CDB: [52803.353925] Read(10): 28 00 00 67 65 17 00 00 08 00 [52803.354484] sd 2:0:0:0: [sdc] Unhandled error code [52803.354487] sd 2:0:0:0: [sdc] [52803.354489] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.354491] sd 2:0:0:0: [sdc] CDB: [52803.354492] Read(10): 28 00 07 1a d8 9f 00 00 08 00 [52803.355005] sd 2:0:0:0: [sdc] Unhandled error code [52803.355010] sd 2:0:0:0: [sdc] [52803.355013] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.355017] sd 2:0:0:0: [sdc] CDB: [52803.355019] Read(10): 28 00 00 67 65 3f 00 00 08 00 [52803.355293] sd 2:0:0:0: [sdc] Unhandled error code [52803.355298] sd 2:0:0:0: [sdc] [52803.355301] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.355305] sd 2:0:0:0: [sdc] CDB: [52803.355308] Read(10): 28 00 00 a4 20 27 00 00 08 00 [52803.355575] sd 2:0:0:0: [sdc] Unhandled error code [52803.355580] sd 2:0:0:0: [sdc] [52803.355583] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.355587] sd 2:0:0:0: [sdc] CDB: [52803.355589] Read(10): 28 00 00 5d dc 67 00 00 08 00 [52803.356647] sd 2:0:0:0: [sdc] Unhandled error code [52803.356650] sd 2:0:0:0: [sdc] [52803.356652] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.356654] sd 2:0:0:0: [sdc] CDB: [52803.356655] Read(10): 28 00 07 1a dd 3f 00 00 08 00 [52803.357108] sd 2:0:0:0: [sdc] Unhandled error code [52803.357111] sd 2:0:0:0: [sdc] [52803.357113] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.357115] sd 2:0:0:0: [sdc] CDB: [52803.357116] Read(10): 28 00 00 67 65 97 00 00 08 00 [52803.357298] sd 2:0:0:0: [sdc] Unhandled error code [52803.357300] sd 2:0:0:0: [sdc] [52803.357302] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.357304] sd 2:0:0:0: [sdc] CDB: [52803.357306] Read(10): 28 00 07 1a 04 d7 00 00 08 00 [52803.360374] sd 2:0:0:0: [sdc] Unhandled error code [52803.360377] sd 2:0:0:0: [sdc] [52803.360379] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.360382] sd 2:0:0:0: [sdc] CDB: [52803.360383] Read(10): 28 00 00 67 65 b7 00 00 08 00 [52803.360581] sd 2:0:0:0: [sdc] Unhandled error code [52803.360584] sd 2:0:0:0: [sdc] [52803.360586] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.360588] sd 2:0:0:0: [sdc] CDB: [52803.360589] Read(10): 28 00 00 67 65 c7 00 00 08 00 [52803.361352] sd 2:0:0:0: [sdc] Unhandled error code [52803.361355] sd 2:0:0:0: [sdc] [52803.361357] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.361359] sd 2:0:0:0: [sdc] CDB: [52803.361360] Read(10): 28 00 09 bd e1 af 00 00 08 00 [52803.362096] sd 2:0:0:0: [sdc] Unhandled error code [52803.362099] sd 2:0:0:0: [sdc] [52803.362101] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.362103] sd 2:0:0:0: [sdc] CDB: [52803.362104] Read(10): 28 00 07 0a 64 e7 00 00 08 00 [52803.362555] sd 2:0:0:0: [sdc] Unhandled error code [52803.362558] sd 2:0:0:0: [sdc] [52803.362560] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.362562] sd 2:0:0:0: [sdc] CDB: [52803.362563] Read(10): 28 00 00 67 65 d7 00 00 08 00 [52803.362747] sd 2:0:0:0: [sdc] Unhandled error code [52803.362750] sd 2:0:0:0: [sdc] [52803.362752] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.362754] sd 2:0:0:0: [sdc] CDB: [52803.362755] Read(10): 28 00 01 4c 12 6f 00 00 08 00 [52803.362977] sd 2:0:0:0: [sdc] Unhandled error code [52803.362980] sd 2:0:0:0: [sdc] [52803.362982] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.362984] sd 2:0:0:0: [sdc] CDB: [52803.362985] Read(10): 28 00 03 85 43 7f 00 00 08 00 [52803.365197] sd 2:0:0:0: [sdc] Unhandled error code [52803.365200] sd 2:0:0:0: [sdc] [52803.365202] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.365204] sd 2:0:0:0: [sdc] CDB: [52803.365206] Read(10): 28 00 07 15 46 4f 00 00 08 00 [52803.365524] sd 2:0:0:0: [sdc] Unhandled error code [52803.365527] sd 2:0:0:0: [sdc] [52803.365528] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.365531] sd 2:0:0:0: [sdc] CDB: [52803.365532] Read(10): 28 00 07 11 78 8f 00 00 08 00 [52803.369355] sd 2:0:0:0: [sdc] Unhandled error code [52803.369360] sd 2:0:0:0: [sdc] [52803.369362] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.369365] sd 2:0:0:0: [sdc] CDB: [52803.369366] Read(10): 28 00 09 bd e2 8f 00 00 08 00 [52803.370806] sd 2:0:0:0: [sdc] Unhandled error code [52803.370809] sd 2:0:0:0: [sdc] [52803.370811] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.370814] sd 2:0:0:0: [sdc] CDB: [52803.370815] Read(10): 28 00 07 1a c6 37 00 00 08 00 [52803.371630] sd 2:0:0:0: [sdc] Unhandled error code [52803.371634] sd 2:0:0:0: [sdc] [52803.371636] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.371639] sd 2:0:0:0: [sdc] CDB: [52803.371640] Read(10): 28 00 00 67 66 57 00 00 08 00 [52803.371863] sd 2:0:0:0: [sdc] Unhandled error code [52803.371867] sd 2:0:0:0: [sdc] [52803.371868] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.371871] sd 2:0:0:0: [sdc] CDB: [52803.371872] Read(10): 28 00 00 64 0b df 00 00 08 00 [52803.373467] sd 2:0:0:0: [sdc] Unhandled error code [52803.373470] sd 2:0:0:0: [sdc] [52803.373472] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.373474] sd 2:0:0:0: [sdc] CDB: [52803.373476] Read(10): 28 00 00 60 83 7f 00 00 08 00 [52803.373655] sd 2:0:0:0: [sdc] Unhandled error code [52803.373658] sd 2:0:0:0: [sdc] [52803.373660] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.373662] sd 2:0:0:0: [sdc] CDB: [52803.373663] Read(10): 28 00 00 60 83 7f 00 00 08 00 [52803.374063] sd 2:0:0:0: [sdc] Unhandled error code [52803.374066] sd 2:0:0:0: [sdc] [52803.374068] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.374070] sd 2:0:0:0: [sdc] CDB: [52803.374071] Read(10): 28 00 08 db d5 5f 00 00 08 00 [52803.374602] sd 2:0:0:0: [sdc] Unhandled error code [52803.374605] sd 2:0:0:0: [sdc] [52803.374607] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.374609] sd 2:0:0:0: [sdc] CDB: [52803.374611] Read(10): 28 00 07 1a bf a7 00 00 08 00 [52803.375259] sd 2:0:0:0: [sdc] Unhandled error code [52803.375264] sd 2:0:0:0: [sdc] [52803.375267] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.375270] sd 2:0:0:0: [sdc] CDB: [52803.375272] Read(10): 28 00 00 67 66 87 00 00 08 00 [52803.375515] sd 2:0:0:0: [sdc] Unhandled error code [52803.375520] sd 2:0:0:0: [sdc] [52803.375522] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.375526] sd 2:0:0:0: [sdc] CDB: [52803.375527] Read(10): 28 00 00 62 54 8f 00 00 08 00 [52803.378506] sd 2:0:0:0: [sdc] Unhandled error code [52803.378513] sd 2:0:0:0: [sdc] [52803.378516] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.378520] sd 2:0:0:0: [sdc] CDB: [52803.378522] Read(10): 28 00 00 67 66 bf 00 00 08 00 [52803.381048] sd 2:0:0:0: [sdc] Unhandled error code [52803.381054] sd 2:0:0:0: [sdc] [52803.381057] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.381061] sd 2:0:0:0: [sdc] CDB: [52803.381063] Read(10): 28 00 00 60 ae 77 00 00 08 00 [52803.381238] sd 2:0:0:0: [sdc] Unhandled error code [52803.381242] sd 2:0:0:0: [sdc] [52803.381245] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.381248] sd 2:0:0:0: [sdc] CDB: [52803.381250] Read(10): 28 00 00 60 ae 77 00 00 08 00 [52803.381382] sd 2:0:0:0: [sdc] Unhandled error code [52803.381386] sd 2:0:0:0: [sdc] [52803.381388] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.381392] sd 2:0:0:0: [sdc] CDB: [52803.381394] Read(10): 28 00 00 60 ae 77 00 00 08 00 [52803.381569] sd 2:0:0:0: [sdc] Unhandled error code [52803.381573] sd 2:0:0:0: [sdc] [52803.381575] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.381579] sd 2:0:0:0: [sdc] CDB: [52803.381581] Read(10): 28 00 00 60 ae 77 00 00 08 00 [52803.382295] sd 2:0:0:0: [sdc] Unhandled error code [52803.382300] sd 2:0:0:0: [sdc] [52803.382302] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.382306] sd 2:0:0:0: [sdc] CDB: [52803.382307] Read(10): 28 00 00 67 6a 87 00 00 08 00 [52803.382552] sd 2:0:0:0: [sdc] Unhandled error code [52803.382556] sd 2:0:0:0: [sdc] [52803.382558] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.382562] sd 2:0:0:0: [sdc] CDB: [52803.382564] Read(10): 28 00 00 67 6a af 00 00 08 00 [52803.382794] sd 2:0:0:0: [sdc] Unhandled error code [52803.382798] sd 2:0:0:0: [sdc] [52803.382801] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.382804] sd 2:0:0:0: [sdc] CDB: [52803.382806] Read(10): 28 00 00 67 6a c7 00 00 08 00 [52803.383269] sd 2:0:0:0: [sdc] Unhandled error code [52803.383274] sd 2:0:0:0: [sdc] [52803.383277] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.383280] sd 2:0:0:0: [sdc] CDB: [52803.383282] Read(10): 28 00 00 67 6a f7 00 00 08 00 [52803.383556] sd 2:0:0:0: [sdc] Unhandled error code [52803.383560] sd 2:0:0:0: [sdc] [52803.383563] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.383566] sd 2:0:0:0: [sdc] CDB: [52803.383568] Read(10): 28 00 00 67 6b 2f 00 00 08 00 [52803.386185] sd 2:0:0:0: [sdc] Unhandled error code [52803.386191] sd 2:0:0:0: [sdc] [52803.386194] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.386198] sd 2:0:0:0: [sdc] CDB: [52803.386200] Read(10): 28 00 01 4c 1b bf 00 00 08 00 [52803.386454] sd 2:0:0:0: [sdc] Unhandled error code [52803.386458] sd 2:0:0:0: [sdc] [52803.386461] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.386465] sd 2:0:0:0: [sdc] CDB: [52803.386467] Read(10): 28 00 07 1a b4 1f 00 00 08 00 [52803.388320] sd 2:0:0:0: [sdc] Unhandled error code [52803.388324] sd 2:0:0:0: [sdc] [52803.388326] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.388328] sd 2:0:0:0: [sdc] CDB: [52803.388329] Read(10): 28 00 09 bd de 17 00 00 08 00 [52803.388836] sd 2:0:0:0: [sdc] Unhandled error code [52803.388838] sd 2:0:0:0: [sdc] [52803.388839] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.388841] sd 2:0:0:0: [sdc] CDB: [52803.388842] Read(10): 28 00 07 57 9f ff 00 00 08 00 [52803.389124] sd 2:0:0:0: [sdc] Unhandled error code [52803.389126] sd 2:0:0:0: [sdc] [52803.389127] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.389129] sd 2:0:0:0: [sdc] CDB: [52803.389130] Read(10): 28 00 00 67 6b 8f 00 00 08 00 [52803.389244] sd 2:0:0:0: [sdc] Unhandled error code [52803.389246] sd 2:0:0:0: [sdc] [52803.389248] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.389249] sd 2:0:0:0: [sdc] CDB: [52803.389250] Read(10): 28 00 07 e9 ee ff 00 00 08 00 [52803.390386] sd 2:0:0:0: [sdc] Unhandled error code [52803.390389] sd 2:0:0:0: [sdc] [52803.390390] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.390392] sd 2:0:0:0: [sdc] CDB: [52803.390393] Read(10): 28 00 07 1a be 0f 00 00 08 00 [52803.390682] sd 2:0:0:0: [sdc] Unhandled error code [52803.390685] sd 2:0:0:0: [sdc] [52803.390686] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.390688] sd 2:0:0:0: [sdc] CDB: [52803.390689] Read(10): 28 00 00 67 6b e7 00 00 08 00 [52803.390804] sd 2:0:0:0: [sdc] Unhandled error code [52803.390806] sd 2:0:0:0: [sdc] [52803.390808] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.390809] sd 2:0:0:0: [sdc] CDB: [52803.390810] Read(10): 28 00 07 ed 17 bf 00 00 08 00 [52803.391449] sd 2:0:0:0: [sdc] Unhandled error code [52803.391451] sd 2:0:0:0: [sdc] [52803.391452] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.391454] sd 2:0:0:0: [sdc] CDB: [52803.391455] Read(10): 28 00 09 bd e5 9f 00 00 08 00 [52803.391956] sd 2:0:0:0: [sdc] Unhandled error code [52803.391958] sd 2:0:0:0: [sdc] [52803.391960] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.391961] sd 2:0:0:0: [sdc] CDB: [52803.391962] Read(10): 28 00 00 b5 86 a7 00 00 08 00 [52803.392293] sd 2:0:0:0: [sdc] Unhandled error code [52803.392295] sd 2:0:0:0: [sdc] [52803.392296] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.392298] sd 2:0:0:0: [sdc] CDB: [52803.392299] Read(10): 28 00 07 18 bf bf 00 00 08 00 [52803.392843] sd 2:0:0:0: [sdc] Unhandled error code [52803.392845] sd 2:0:0:0: [sdc] [52803.392846] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.392848] sd 2:0:0:0: [sdc] CDB: [52803.392849] Read(10): 28 00 00 60 b3 1f 00 00 08 00 [52803.392929] sd 2:0:0:0: [sdc] Unhandled error code [52803.392931] sd 2:0:0:0: [sdc] [52803.392932] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.392934] sd 2:0:0:0: [sdc] CDB: [52803.392935] Read(10): 28 00 00 60 b3 1f 00 00 08 00 [52803.393057] sd 2:0:0:0: [sdc] Unhandled error code [52803.393059] sd 2:0:0:0: [sdc] [52803.393060] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393062] sd 2:0:0:0: [sdc] CDB: [52803.393063] Read(10): 28 00 00 60 83 9f 00 00 08 00 [52803.393286] sd 2:0:0:0: [sdc] Unhandled error code [52803.393288] sd 2:0:0:0: [sdc] [52803.393289] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393291] sd 2:0:0:0: [sdc] CDB: [52803.393292] Read(10): 28 00 00 67 6b bf 00 00 08 00 [52803.393720] sd 2:0:0:0: [sdc] Unhandled error code [52803.393722] sd 2:0:0:0: [sdc] [52803.393723] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393725] sd 2:0:0:0: [sdc] CDB: [52803.393725] Read(10): 28 00 00 60 b2 17 00 00 08 00 [52803.393806] sd 2:0:0:0: [sdc] Unhandled error code [52803.393808] sd 2:0:0:0: [sdc] [52803.393809] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393810] sd 2:0:0:0: [sdc] CDB: [52803.393811] Read(10): 28 00 00 60 b2 17 00 00 08 00 [52803.393892] sd 2:0:0:0: [sdc] Unhandled error code [52803.393894] sd 2:0:0:0: [sdc] [52803.393895] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393896] sd 2:0:0:0: [sdc] CDB: [52803.393897] Read(10): 28 00 00 60 b2 17 00 00 08 00 [52803.393974] sd 2:0:0:0: [sdc] Unhandled error code [52803.393976] sd 2:0:0:0: [sdc] [52803.393977] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393978] sd 2:0:0:0: [sdc] CDB: [52803.393979] Read(10): 28 00 00 60 b2 17 00 00 08 00 [52803.394298] sd 2:0:0:0: [sdc] Unhandled error code [52803.394300] sd 2:0:0:0: [sdc] [52803.394302] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.394303] sd 2:0:0:0: [sdc] CDB: [52803.394304] Read(10): 28 00 00 5d a6 a7 00 00 08 00 [52803.395577] sd 2:0:0:0: [sdc] Unhandled error code [52803.395580] sd 2:0:0:0: [sdc] [52803.395582] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.395584] sd 2:0:0:0: [sdc] CDB: [52803.395585] Read(10): 28 00 00 00 01 9f 00 00 08 00 [52803.395721] sd 2:0:0:0: [sdc] Unhandled error code [52803.395724] sd 2:0:0:0: [sdc] [52803.395725] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.395726] sd 2:0:0:0: [sdc] CDB: [52803.395727] Read(10): 28 00 00 00 01 67 00 00 08 00 [52803.395843] sd 2:0:0:0: [sdc] Unhandled error code [52803.395845] sd 2:0:0:0: [sdc] [52803.395846] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.395847] sd 2:0:0:0: [sdc] CDB: [52803.395848] Read(10): 28 00 02 a8 33 77 00 00 08 00 [52803.395960] sd 2:0:0:0: [sdc] Unhandled error code [52803.395962] sd 2:0:0:0: [sdc] [52803.395963] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.395965] sd 2:0:0:0: [sdc] CDB: [52803.395965] Read(10): 28 00 00 b5 ae 7f 00 00 08 00 [52803.396077] sd 2:0:0:0: [sdc] Unhandled error code [52803.396079] sd 2:0:0:0: [sdc] [52803.396080] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396082] sd 2:0:0:0: [sdc] CDB: [52803.396083] Read(10): 28 00 00 63 64 bf 00 00 08 00 [52803.396193] sd 2:0:0:0: [sdc] Unhandled error code [52803.396195] sd 2:0:0:0: [sdc] [52803.396196] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396198] sd 2:0:0:0: [sdc] CDB: [52803.396199] Read(10): 28 00 07 1a e2 e7 00 00 08 00 [52803.396313] sd 2:0:0:0: [sdc] Unhandled error code [52803.396315] sd 2:0:0:0: [sdc] [52803.396316] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396318] sd 2:0:0:0: [sdc] CDB: [52803.396319] Read(10): 28 00 07 1a b9 87 00 00 08 00 [52803.396435] sd 2:0:0:0: [sdc] Unhandled error code [52803.396437] sd 2:0:0:0: [sdc] [52803.396438] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396439] sd 2:0:0:0: [sdc] CDB: [52803.396441] Read(10): 28 00 02 ce 8e df 00 00 08 00 [52803.396555] sd 2:0:0:0: [sdc] Unhandled error code [52803.396557] sd 2:0:0:0: [sdc] [52803.396558] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396560] sd 2:0:0:0: [sdc] CDB: [52803.396561] Read(10): 28 00 0e 66 6d f7 00 00 08 00 [52803.396769] sd 2:0:0:0: [sdc] Unhandled error code [52803.396770] sd 2:0:0:0: [sdc] [52803.396772] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396773] sd 2:0:0:0: [sdc] CDB: [52803.396774] Read(10): 28 00 07 1a e4 2f 00 00 08 00 [52803.396886] sd 2:0:0:0: [sdc] Unhandled error code [52803.396888] sd 2:0:0:0: [sdc] [52803.396889] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396890] sd 2:0:0:0: [sdc] CDB: [52803.396891] Read(10): 28 00 00 63 d4 3f 00 00 08 00 [52803.397002] sd 2:0:0:0: [sdc] Unhandled error code [52803.397004] sd 2:0:0:0: [sdc] [52803.397005] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.397007] sd 2:0:0:0: [sdc] CDB: [52803.397007] Read(10): 28 00 07 1a e4 1f 00 00 08 00 [52803.400074] sd 2:0:0:0: [sdc] Unhandled error code [52803.400078] sd 2:0:0:0: [sdc] [52803.400079] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.400081] sd 2:0:0:0: [sdc] CDB: [52803.400082] Read(10): 28 00 07 16 c7 5f 00 00 08 00 [52803.400318] sd 2:0:0:0: [sdc] Unhandled error code [52803.400320] sd 2:0:0:0: [sdc] [52803.400322] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.400323] sd 2:0:0:0: [sdc] CDB: [52803.400324] Read(10): 28 00 00 60 01 87 00 00 08 00 [52803.400408] sd 2:0:0:0: [sdc] Unhandled error code [52803.400410] sd 2:0:0:0: [sdc] [52803.400412] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.400413] sd 2:0:0:0: [sdc] CDB: [52803.400414] Read(10): 28 00 00 60 01 0f 00 00 08 00 [52803.400564] sd 2:0:0:0: [sdc] Unhandled error code [52803.400566] sd 2:0:0:0: [sdc] [52803.400568] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.400569] sd 2:0:0:0: [sdc] CDB: [52803.400570] Read(10): 28 00 00 5d d1 d7 00 00 08 00 [52803.400841] sd 2:0:0:0: [sdc] Unhandled error code [52803.400843] sd 2:0:0:0: [sdc] [52803.400844] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.400846] sd 2:0:0:0: [sdc] CDB: [52803.400847] Read(10): 28 00 07 1a e3 47 00 00 08 00 [52803.401151] sd 2:0:0:0: [sdc] Unhandled error code [52803.401153] sd 2:0:0:0: [sdc] [52803.401155] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.401156] sd 2:0:0:0: [sdc] CDB: [52803.401157] Read(10): 28 00 07 1a b9 1f 00 00 08 00 [52803.401310] sd 2:0:0:0: [sdc] Unhandled error code [52803.401312] sd 2:0:0:0: [sdc] [52803.401313] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.401315] sd 2:0:0:0: [sdc] CDB: [52803.401316] Read(10): 28 00 00 a4 1b 57 00 00 08 00 [52803.401877] sd 2:0:0:0: [sdc] Unhandled error code [52803.401879] sd 2:0:0:0: [sdc] [52803.401880] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.401881] sd 2:0:0:0: [sdc] CDB: [52803.401882] Read(10): 28 00 0e 66 35 47 00 00 08 00 [52803.402032] sd 2:0:0:0: [sdc] Unhandled error code [52803.402033] sd 2:0:0:0: [sdc] [52803.402034] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402036] sd 2:0:0:0: [sdc] CDB: [52803.402037] Read(10): 28 00 06 30 69 ff 00 00 08 00 [52803.402148] sd 2:0:0:0: [sdc] Unhandled error code [52803.402150] sd 2:0:0:0: [sdc] [52803.402151] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402153] sd 2:0:0:0: [sdc] CDB: [52803.402154] Read(10): 28 00 09 bd d8 77 00 00 08 00 [52803.402263] sd 2:0:0:0: [sdc] Unhandled error code [52803.402265] sd 2:0:0:0: [sdc] [52803.402266] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402267] sd 2:0:0:0: [sdc] CDB: [52803.402268] Read(10): 28 00 00 5d ff 77 00 00 08 00 [52803.402376] sd 2:0:0:0: [sdc] Unhandled error code [52803.402378] sd 2:0:0:0: [sdc] [52803.402379] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402381] sd 2:0:0:0: [sdc] CDB: [52803.402382] Read(10): 28 00 00 5d ff 7f 00 00 08 00 [52803.402490] sd 2:0:0:0: [sdc] Unhandled error code [52803.402492] sd 2:0:0:0: [sdc] [52803.402493] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402495] sd 2:0:0:0: [sdc] CDB: [52803.402496] Read(10): 28 00 00 00 01 2f 00 00 08 00 [52803.402602] sd 2:0:0:0: [sdc] Unhandled error code [52803.402604] sd 2:0:0:0: [sdc] [52803.402605] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402607] sd 2:0:0:0: [sdc] CDB: [52803.402608] Read(10): 28 00 00 b5 ac 8f 00 00 08 00 [52803.402715] sd 2:0:0:0: [sdc] Unhandled error code [52803.402717] sd 2:0:0:0: [sdc] [52803.402719] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402720] sd 2:0:0:0: [sdc] CDB: [52803.402721] Read(10): 28 00 00 e1 18 ff 00 00 08 00 [52803.402829] sd 2:0:0:0: [sdc] Unhandled error code [52803.402831] sd 2:0:0:0: [sdc] [52803.402833] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402834] sd 2:0:0:0: [sdc] CDB: [52803.402835] Read(10): 28 00 09 bd ea cf 00 00 08 00 [52803.403999] sd 2:0:0:0: [sdc] Unhandled error code [52803.404001] sd 2:0:0:0: [sdc] [52803.404003] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.404005] sd 2:0:0:0: [sdc] CDB: [52803.404006] Read(10): 28 00 07 1a b8 f7 00 00 08 00 [52832.950225] sd 2:0:0:0: [sdc] Unhandled error code [52832.950230] sd 2:0:0:0: [sdc] [52832.950233] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52832.950235] sd 2:0:0:0: [sdc] CDB: [52832.950237] Write(10): 2a 00 00 60 bf 7f 00 00 08 00 [52832.950247] blk_update_request: 1077 callbacks suppressed [52832.950250] end_request: I/O error, dev sdc, sector 6340479 [52832.950253] quiet_error: 1077 callbacks suppressed [52832.950256] Buffer I/O error on device sdc1, logical block 792552 [52832.950258] lost page write due to I/O error on sdc1 [52832.950269] sd 2:0:0:0: [sdc] Unhandled error code [52832.950272] sd 2:0:0:0: [sdc] [52832.950273] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52832.950276] sd 2:0:0:0: [sdc] CDB: [52832.950277] Write(10): 2a 00 01 a5 f1 4f 00 00 08 00 [52832.950285] end_request: I/O error, dev sdc, sector 27652431 [52832.950287] Buffer I/O error on device sdc1, logical block 3456546 [52832.950289] lost page write due to I/O error on sdc1

  Read the article

• NetBeans Podcast 69

  - by TinuA

  Podcast Guests: Terrence Barr, Simon Ritter, Jaroslav Tulach (It's an all-Oracle lineup!) Download mp3: 47 Minutes – 39.5 mb Subscribe on iTunes NetBeans Community News with Geertjan and Tinu If you missed the first two Java Virtual Developer Day events in early May, there's still one more LIVE training left on May 28th. Sign up here to participate live in the APAC time zone or watch later ON DEMAND. Video: Get started with Vaadin development using NetBeans IDE NetBeans IDE was at JavaCro 2014 and at Hippo Get-together 2014 Another great lineup is in the works for NetBeans Day at JavaOne 2014. More details coming soon! NetBeans' Facebook page is almost at 40,000 Likes! Help us crack that milestone in the next few weeks! Other great ways to stay updated about NetBeans? Twitter and Google+. 09:28 / Terrence Barr - What to Know about Java Embedded Terrence Barr, a Senior Technologist and Principal Product Manager for Embedded and Mobile technologies at Oracle, discusses new features of the Java SE Embedded and Java ME Embedded platforms, and sheds some light on the differences between them and what they have to offer to developers. Learn more about Java SE Embedded Tutorial: Using Oracle Java SE Embedded Support in NetBeans IDE Learn more about Java ME Embedded Video: NetBeans IDE Support for Java ME 8 Video: Installing and Using Java ME SDK 8.0 Plugins in NetBeans IDE Follow Terrence Barr to keep up with news in the Embedded space: Blog and Twitter 26:02 / Simon Ritter - A Massive Serving of Raspberry Pi Oracle's Raspberry Pi virtual course is back by popular demand! Simon Ritter, the head of Oracle's Java Technology Evangelism team, chats about the second run of the free Java Embedded course (starting May 30th), what participants can expect to learn, NetBeans' support for Java ME development, and other Java trainings coming to a desktop, laptop or user group near you. Sign up for the Oracle MOOC: Develop Java Embedded Applications Using Raspberry Pi Find out when Simon Ritter and the Java Evangelism team are coming to a Java event or JUG in your area--follow them on Twitter: Simon Ritter Angela Caicedo Steven Chin Jim Weaver 36:58 / Jaroslav Tulach - A Perfect Translation Jaroslav Tulach returns to the NetBeans podcast with tales about the Japanese translation of the Practical API Design book, which he contends surpasses all previous translations, including the English edition! Order "Practical API Design" (Japanese Version)  Find out why the Japanese translation is the best edition yet *Have ideas for NetBeans Podcast topics? Send them to ">nbpodcast at netbeans dot org. *Subscribe to the official NetBeans page on Facebook! Check us out as well on Twitter, YouTube, and Google+.

  Read the article

• Ubuntu 11.10 - can't adjust brightness on my laptop

  - by Danny

  Using every method possible I'm unable to change my laptop brightness.. It's stuck on super max brightness.. Using the slider in the "screens" window int he control panel doesnt do anything, and using the fn keys doesn't do anything... Some info about my system: laptop is a MSI VR420 Running ubuntu 11.10 video card is an integrated intel card Used to work when I ran ubuntu 10.10 and earlier versions (not sure if it worked out of the box or if I inadvertly fixed it in previous versions while installing lots of other packages) Brightness slider on the "screen" window doesn't do anything, "dim when on battery -power" doesnt do anything When I use the fn+f4/f5 keys to adjust brightness there is a popup showing that its receving the input, but i can only go from between 0 brightness and max brightness.. (that is what the output is showing, the brightness does not change though) when attempting to change the brightness with fn+f4/f5 my dmesg log reports "ACPI: Failed to switch the brightness" Here are some outputs from some terminal commands, not sure if any of this is useful or not.. lspci - http://pastebin.com/EimZSGs3 "ls /sys/class/backlight/*/brightness" will output "/sys/class/backlight/intel_backlight/brightness" "cat /sys/class/backlight/intel_backlight/brightness" = 0 (when I use the fn+f4/f5) this will change betwene 0 and, but the actual brightness doesn't change) "cat /sys/class/backlight/intel_backlight/max_brightness" = 1 "lsmod | grep ^i915" = i915 505108 3 here is the list of things I've tried through searching google..... Edit /etc/default/grub?GRUB_CMDLINE_LINUX_DEFAULT: acpi_osi=Linux, acpi_backlight=vendor, nomodeset. (as well as several different combinations of these settings being on or off) Edit /etc/X11/xorg.conf (file doesn't exist on my system) Edit /proc/acpi/video/VGA/LCD/brightness (file doesn't exist) sudo setpci -s 00:02.0 F4.B=XX (does nothing) xbacklight -set XX (does nothing) I've tried about everything with no luck... The only thing i haven't tried is adding the ppa that someone suggested here: Unable to change brightness in a Lenovo laptop .... However according to the notes on the ppa.. all of the changes that are in the ppa are now actually apart of 11.10 and the ppa is only for people with 11.04.. Does anyone have any ideas for me? edit:by setting acpi=off in my /etc/default/grub file I was about to get my fn+f4/f5 keys to work, also "dim when display to save power" now makes my laptop dim when on battery power.. the dimness slider however still doesn't do anything.. also xbacklight doesn't do anything stil or any of the other methods... The thing i don't get is why setting acpi=off makes my fn+f4/f5 keys work? Isn't acpi supposed to be enables the backlight to be dimmed? does anyone know what ubuntu is deciding to do behind the scenes when acpi=off? Does anyone know what/if any features I might be losing with it off?

  Read the article

• Virtual Brown Bag: Ruby Newbies, Mockups, There *is* an I in SOLID, fuv

  - by Brian Schroer

  At this week's Virtual Brown Bag meeting: Claudio pointed us to Try Ruby! and Rails For Zombies, two sites to educate Ruby newbies We looked at the free version of Balsamiq, and other online mockup sites George walked us through a refactoring to isolate roles and adhere to the Interface Segregation Principle (the "I" in SOLID) We laughed at fuv, the code editor for "real programmers" For detailed notes, links, and the video recording, go to the VBB wiki page: https://sites.google.com/site/vbbwiki/main_page/2011-02-10

  Read the article

• Built-in network card not working?

  - by Zeeshan

  Hi, I am new to Ubuntu. I have installed Ubuntu 9.04(Jaunty). After installation I found that network card is not wokring. And id doest not list in "System Preferenes Network Connections" So , i got another card from my friend and try to search on internat about my problem but still cant find solution. Some commands output is here which may be help to solve problem root@mzeeshan-desktop:/home/mzeeshan# uname -r 2.6.28-11-generic root@mzeeshan-desktop:/home/mzeeshan# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:02:44:4a:45:12 inet addr:192.168.5.37 Bcast:192.168.5.255 Mask:255.255.255.0 inet6 addr: fe80::202:44ff:fe4a:4512/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3774 errors:0 dropped:0 overruns:0 frame:0 TX packets:3611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4307045 (4.3 MB) TX bytes:583067 (583.0 KB) Interrupt:22 Base address:0x1000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) pan0 Link encap:Ethernet HWaddr 5e:25:17:a1:18:ac BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@mzeeshan-desktop:/home/mzeeshan# lspci 00:00.0 Host bridge: Intel Corporation Device 0069 (rev 12) 00:01.0 PCI bridge: Intel Corporation Auburndale/Havendale PCI Express x16 Root Port (rev 12) 00:19.0 Ethernet controller: Intel Corporation Device 10f0 (rev 05) 00:1a.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev 05) 00:1c.4 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 5 (rev 05) 00:1c.6 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 7 (rev 05) 00:1c.7 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 8 (rev 05) 00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev 05) 00:1f.2 IDE interface: Intel Corporation Ibex Peak 4 port SATA IDE Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05) 00:1f.5 IDE interface: Intel Corporation Ibex Peak 2 port SATA IDE Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) 06:00.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07) 06:00.1 Input device controller: Creative Labs SB Live! Game Port (rev 07) 06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) root@mzeeshan-desktop:/home/mzeeshan# Motherboard is Intel DP55WG. I don't know what to do next. Any help will be greatly appreciated.. Thanks

  Read the article

• Oracle Systems and Solutions at OpenWorld Tokyo 2012

  - by ferhat

  Oracle OpenWorld Tokyo and JavaOne Tokyo will start next week April 4th. We will cover Oracle systems and Oracle Optimized Solutions in several keynote talks and general sessions. Full schedule can be found here. Come by the DemoGrounds to learn more about mission critical integration and optimization of complete Oracle stack. Our Oracle Optimized Solutions experts will be at hand to discuss 1-1 several of Oracle's systems solutions and technologies. Oracle Optimized Solutions are proven blueprints that eliminate integration guesswork by combing best in class hardware and software components to deliver complete system architectures that are fully tested, and include documented best practices that reduce integration risks and deliver better application performance. And because they are highly flexible by design, Oracle Optimized Solutions can be implemented as an end-to-end solution or easily adapted into existing environments. Oracle Optimized Solutions, Servers,  Storage, and Oracle Solaris  Sessions, Keynotes, and General Session Talks DAY TIME TITLE Notes Session Wednesday  April 4 9:00 - 11:15 Keynote: ENGINEERED FOR INNOVATION - Engineered Systems Mark Hurd,  President, Oracle Takao Endo, President & CEO, Oracle Corporation Japan John Fowler, EVP of Systems, Oracle Ed Screven, Chief Corporate Architect, Oracle English Session K1-01 11:50 - 12:35 Simplifying IT: Transforming the Data Center with Oracle's Engineered Systems Robert Shimp, Group VP, Product Marketing, Oracle English Session S1-01 15:20 - 16:05 Introducing Tiered Storage Solution for low cost Big Data Archiving S1-33 16:30 - 17:15 Simplifying IT - IT System Consolidation that also Accelerates Business Agility S1-42 Thursday  April 5 9:30 - 11:15 Keynote: Extreme Innovation Larry Ellison, Chief Executive Officer, Oracle English Session K2-01 11:50 - 13:20 General Session: Server and Storage Systems Strategy John Fowler, EVP of Systems, Oracle English Session G2-01 16:30 - 17:15 Top 5 Reasons why ZFS Storage appliance is "The cloud storage" by SAKURA Internet Inc L2-04 16:30 - 17:15 The UNIX based Exa* Performance IT Integration Platform - SPARC SuperCluster S2-42 17:40 - 18:25 Full stack solutions of hardware and software with SPARC SuperCluster and Oracle E-Business Suite  to minimize the business cost while maximizing the agility, performance, and availability S2-53 Friday April 6 9:30 - 11:15 Keynote: Oracle Fusion Applications & Cloud Robert Shimp, Group VP, Product Marketing Anthony Lye, Senior VP English Session K3-01 11:50 - 12:35 IT at Oracle: The Art of IT Transformation to Enable Business Growth English Session S3-02 13:00-13:45 ZFS Storagge Appliance: Architecture of high efficient and high performance S3-13 14:10 - 14:55 Why "Niko Niko doga" chose ZFS Storage Appliance to support their growing requirements and storage infrastructure By DWANGO Co, Ltd. S3-21 15:20 - 16:05 Osaka University: Lower TCO and higher flexibility for student study by Virtual Desktop By Osaka University S3-33 Oracle Developer Sessions with Oracle Systems and Oracle Solaris DAY TIME TITLE Notes LOCATION Friday April 6 13:00 - 13:45 Oracle Solaris 11 Developers D3-03 13:00 - 14:30 Oracle Solaris Tuning Contest Hands-On Lab D3-04 14:00 - 14:35 How to build high performance and high security Oracle Database environment with Oracle SPARC/Solaris English Session D3-13 15:00 - 15:45 IT Assets preservation and constructive migration with Oracle Solaris virtualization D3-24 16:00 - 17:30 The best packaging system for cloud environment - Creating an IPS package D3-34 Follow Oracle Infrared at Twitter, Facebook, Google+, and LinkedIn  to catch the latest news, developments, announcements, and inside views from  Oracle Optimized Solutions.

  Read the article

• ath9k driver does not weak up

  - by shantanu

  I know this is common question but i found no suitable answer, so i am asking this again. I installed ubuntu 11.10. I found the bug for ath9k, so set first network boot from BIOS menu. That's worked. I have upgraded to 12.04 yesterday. Now ath9k is creating problem again. First network boot is still enable. ath9k works at start. But failed(connect again and again) after couple of minutes. dmesg show error that it can not weak up in 500us. So i tried #compat-wireless-3.5.1-1. But result is same. I have also added #nohwcrypt=1 option in /etc/modeprob.d/ath9k.conf. Still no luck. I tried #rmmod and then modprobe sudo modprobe ath9k nohwcrypt=1 dmesg shows me error: [ 400.690086] ath9k: Driver unloaded [ 406.214329] ath9k 0000:06:00.0: enabling device (0000 -> 0002) [ 406.214348] ath9k 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 406.214368] ath9k 0000:06:00.0: setting latency timer to 64 [ 406.428517] ath9k 0000:06:00.0: Failed to initialize device [ 406.428852] ath9k 0000:06:00.0: PCI INT A disabled [ 406.428887] ath9k: probe of 0000:06:00.0 failed with error -5 dmesg error when driver fail: 355.023521] ath: Chip reset failed [ 355.023524] ath: Unable to reset channel, reset status -22 [ 355.023556] ath: Unable to set channel [ 355.088569] ath: Failed to stop TX DMA, queues=0x10f! [ 355.122708] ath: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff [ 355.122714] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up [ 355.263962] ath: Chip reset failed [ 355.263966] ath: Unable to reset channel (2437 MHz), reset status -22 [ 358.996063] ath: Failed to wakeup in 500us [ 364.004182] ath: Failed to wakeup in 500us I can not install fresh ubuntu because i have lots of application installed. System : Acer Aspire 4250 AMD dual core 1.6GHZ Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) EDITED Now i am in serious problem. No wifi device is not showing in ifconfig or lshw commands. Only ether-net interface shows. I tried (FN + WIFI) several times to enable the device but nothing helps. Now I have installed fresh ubuntu 12.04. Please help lshw -c network: *-network description: Ethernet interface product: 82566DC Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 02 serial: 00:19:d1:7a:8e:f9 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.0.0-k duplex=full firmware=1.1-0 ip=192.168.1.114 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:90300000-9031ffff memory:90324000-90324fff ioport:20c0(size=32) rfkill command does not show anything but no error.

  Read the article

• Very very slow transfer speeds between Windows 7 and samba server running on Ubuntu 11.10/12.04 minimal

  - by kuzyt

  As mentioned in the title I tried transferring files between Windows 7 and the samba server running on both Ubuntu 11.10 and 12.04 but both showed very slow transfer speeds. Can someone please guide me in the right direction to debug this problem ? wget --output-document=/dev/null http://tokyo1.linode.com/100MB-tokyo.bin --2012-08-21 22:02:17-- http://tokyo1.linode.com/100MB-tokyo.bin Resolving tokyo1.linode.com (tokyo1.linode.com)... 106.187.33.12 Connecting to tokyo1.linode.com (tokyo1.linode.com)|106.187.33.12|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 104857600 (100M) [application/octet-stream] Saving to: `/dev/null' 8% [=============> ] 8,923,980 64.8K/s eta 15m 0s wlan0 IEEE 802.11abgn ESSID:"TNET" Mode:Managed Frequency:2.462 GHz Access Point: 58:6D:8F:26:20:7A Bit Rate=117 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=57/70 Signal level=-53 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:101 Invalid misc:2448 Missed beacon:0 03:00.0 Network controller: Atheros Communications Inc. AR9300 Wireless LAN adaptor (rev 01) Subsystem: Atheros Communications Inc. Device 3112 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=128K] Expansion ROM at fea20000 [disabled] [size=64K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [70] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <64us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [300 v1] Device Serial Number 00-00-00-00-00-00-00-00 Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• New SQL Code Deployment Book and Damn I Need to Blog More

  - by Rodney

  Select datediff(d,'02/19/2009',getdate()) This value returned from the above SELECT statement  is 398 and that is the number of days since my last blog post.  As I was formulating my apology for this hiatus from blogging, it dawned on me that I also do not twitter (sorry tweet) and as apologies beget apologies, I then realized that instead of catching up on the backlog of blogs, I should write a book about what I have been most focused on in the past year, one month and 3 days.  That focus is my day job, which of course, most of us have. And that day job we share is why most of us read blogs, tweets, articles and even books in the first place. So my focus for the past year has been SQL code deployments and all of that entails. I am fortunate that Redgate has agreed to entertain my crazy notion of writing an entire book about this subject, which I have tentatively titled, "The Sound and the Fury". Wait..that is not right. Oh yes, a title more befiting a techical tome but with as much profundity, "Standardizing SQL Server Code Deployements - A Redgate Guide". The great American novel must wait a few more years. As I begin this journey, I am inviting you to assist me in the discovery process and even be interviewed and included in the book itself. How do you do deployments in your company? Do you have a documented process or no process? Do you do code review or cross your fingers? Do you work for a small company or a Fortune 100 company? Government regulations or  garage? It does not  matter to me. I am not here to judge. I worked for both companies myself and have seen many things that you can relate to.  If you would like to participate and are one of the 3 people still reading this blog after 398 days, please fill out my survey and let's get started.  http://www.surveymonkey.com/s/RRG86RH  

  Read the article

• Atheros AR9285 / Lenovo G560 wireless not working after installing 13.04

  - by teyi

  I had Ubuntu 12.04 initially installed on my laptop. I upgraded to 12.10 then 13.04. Everything worked fine, including wireless. After adding a new memory card ( I only had 2 gb and one memory slot free) my wireess stopped working. I backed up all my data and reinstallled Ubuntu 13.04. Everything works fine except wireess. I bought this laptop in 2010 from Japan. It has Intel Core i5 CPU M 450 @2.40 Ghz * 4 3,7 Gb RAM os type 64 bit The output of iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off The output of rfkill list all: 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no The output of lshw -C network: *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:7d:fe:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.8.0-19-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d6400000-d640ffff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: 02 serial: 88:ae:1d:2b:36:ac size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.2 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:d2410000-d2410fff memory:d2400000-d240ffff memory:d2420000-d243ffff The wi-fi network appears as disconnected ( it's greyed out) Strangely enough I see a wifi network ( not mine) but not mine or the rest. That network doesn't require a password . I click on it, try to connect and i get an error message: failed to connect to xxxxx ... 32) The access point/org/freedesktop/NetworkManager/AccessPoint/0 was not in the scan list. Someone help please

  Read the article

• Measure load of ubuntu server

  - by user84471

  I have Ubuntu server and apache2 installed on it. I want to benchmark it using ab tool from another machine. I want to know how measure load of this program. In top is showing this: top - 06:02:19 up 3 min, 2 users, load average: 0.28, 0.26, 0.12 Tasks: 94 total, 2 running, 92 sleeping, 0 stopped, 0 zombie Cpu(s): 67.2%us, 5.5%sy, 0.0%ni, 26.3%id, 0.5%wa, 0.0%hi, 0.5%si, 0.0%st Mem: 499320k total, 342028k used, 157292k free, 42504k buffers Swap: 514044k total, 0k used, 514044k free, 71388k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1521 www-data 20 0 49180 22m 4144 S 23 4.6 0:00.68 apache2 1520 www-data 20 0 49180 22m 4152 S 22 4.6 0:00.66 apache2 1124 www-data 20 0 49180 22m 4152 S 22 4.6 0:00.70 apache2 1519 www-data 20 0 49180 22m 4152 S 20 4.6 0:00.70 apache2 1525 www-data 20 0 49180 22m 4144 S 16 4.6 0:00.47 apache2 1123 www-data 20 0 49168 22m 4152 S 9 4.6 0:00.78 apache2 1125 www-data 20 0 49168 22m 4152 S 9 4.6 0:00.77 apache2 1126 www-data 20 0 49168 22m 4152 S 9 4.6 0:00.73 apache2 1127 www-data 20 0 49168 22m 4152 S 9 4.6 0:00.74 apache2 1523 www-data 20 0 42896 14m 3388 R 5 3.1 0:00.14 apache2 1038 whoopsie 20 0 24476 3720 2856 S 0 0.7 0:00.01 whoopsie 1089 root 20 0 34060 6988 3640 S 0 1.4 0:00.05 apache2 1338 ubuntu 20 0 2832 1192 944 S 0 0.2 0:00.30 top 1417 ubuntu 20 0 9652 1456 824 S 0 0.3 0:00.02 sshd 1 root 20 0 3540 1876 1248 S 0 0.4 0:00.83 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.03 ksoftirqd/0 4 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/0:0 5 root 20 0 0 0 0 S 0 0.0 0:00.48 kworker/u:0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 9 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/1:0 10 root 20 0 0 0 0 S 0 0.0 0:00.01 ksoftirqd/1 11 root 20 0 0 0 0 S 0 0.0 0:00.17 kworker/0:1 12 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 13 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset 14 root 0 -20 0 0 0 S 0 0.0 0:00.00 khelper 15 root 20 0 0 0 0 S 0 0.0 0:00.00 kdevtmpfs 16 root 0 -20 0 0 0 S 0 0.0 0:00.00 netns 17 root 20 0 0 0 0 S 0 0.0 0:00.32 kworker/u:1 18 root 20 0 0 0 0 S 0 0.0 0:00.00 sync_supers 19 root 20 0 0 0 0 S 0 0.0 0:00.00 bdi-default 20 root 0 -20 0 0 0 S 0 0.0 0:00.00 kintegrityd 21 root 0 -20 0 0 0 S 0 0.0 0:00.00 kblockd 22 root 0 -20 0 0 0 S 0 0.0 0:00.00 ata_sff 23 root 20 0 0 0 0 S 0 0.0 0:00.00 khubd So its difficult to do it without any script or program. How can I do this?

  Read the article

• sell ccv good and fresh sell cvv all country fullz info

  - by underworld

  ICQ: 640240418 YH: underworld_cvv Mail: [email protected] WELCOME TO MY UNDERWORLD ! I'm is Professional seller,more than 5 years experience,i started work in 2008,i have sold cvv credit card to many customers all over the world. Selling cvv, fullz many country as: Canada,USA,Australia,UK...all And many country in Europe: Fr,Ger,Spain,Ita... I hope we will work together for a long time. Always sell cvv quality with high balance. I have a website but if you want buy cvv good price please contact me. Have Cvv with Bin or Cvv with DOB,VBV if customer claim. List Price Some Cvv (good price for good buyer) -Us: 5$ /1 -Us VBV-DOB : 8$ /1 -Us fullz : 40$ /1 -Us (amex,discover) : 8$ /1 -Ca : 10$ /1 -Ca DOB : 20$ /1 -Ca fullz : 50$ /1 -Ca with bin : 15$ /1 -Au : 10$ /1 -Au DOB : 20$ /1 -Uk : 10$ /1 -Uk DOB-VBV : 20$ /1 -Fr : 15$ /1 -Fr DOB-VBV : 25$ /1 -Ger : 18$ /1 -Ger with DOB : 25$ /1 -Spain : 15$ /1 -Spain Fullz : 40$ /1 -Ita : 15$ /1 -Ita with DOB : 25$ /1 -Japan : 15$ /1 -Japan with DOB : 25$ /1 Cvv random country -Denmark : 25$ /1 -Sweden : 20$ /1 -Switzerland : 20$ /1 -Slovakia : 20$ /1 -Netherlands : 18$ /1 -Mexico : 15 /1 -Middle East : 18$ /1 -New zeland : 18$ /1 -Asia : 15$ /1 -Ireland : 18$ /1 -Belgium : 15$ /1 -Taiwan : 15$ /1 -UAE : 20$ /1 And many country... Some Bins -Us bins: 517805,488893,492536,408181,542432,482880,374355,374372... -Ca bins: 450003,450008,451242,450060,549198,533833,519123,544612... -Uk bins: 4547,5506,5569,5404,5031,4921,5505,5506,4921,4550... -Ger bins: 492942,490762,530127... -Au bins: 543568,450605,494053,450606,456475,521893,519163... -Fr bins: 497847,497831,497841,497849,497820,497825,497833... -And others bins for others country... Format France fullz Nom : di murro Prenom : mariano Adresse : rue des caillettes Ville : Corbeil Essonnes Code Postale : 91100 Telephone : 33672492372 ========== (2eme Tape) ========== Nom de Bank : crédit agricole Nom de Carte Bancaire : di murro mariano Date de naissance : 12 / 02 / 1969 Type de carte : MasterCard Numero de carte : 5131018223855xxx Numero de compte : Date d'expiration : 10 / 2014 CVN : 336 -WARRANTY time is 12 HOURS. Any cvv purchase over 12 hours can not warranty. -If you buy over 30 cvvs, i will sell for you best price. -I will discount for you if you are reseller or you order everyday many on the next day. -I only accept payment money by PerfectMoney (PM) Western Union (WU) and MoneyGram. -I will prove to you that I am the best sellers. And make sure you will enjoy doing business with me. Contact: ICQ: 640240418 YH: underworld_cvv Mail: [email protected]

  Read the article

• Java Oracle Installation /usr/bin/java: cannot execute binary file

  - by Dave

  Hi I've been trying for 1 day to get Oracle Java running on Ubuntu. I have a powermac g5 with Ubuntu 12.04 ppc64. uname -a : Linux LK37 3.2.0-53-powerpc64-smp #81-Ubuntu SMP Thu Aug 22 21:17:14 UTC 2013 ppc64 ppc64 ppc64 GNU/Linux lspci: david@LK37:~$ sudo lspc [sudo] password for david: sudo: lspc: command not found david@LK37:~$ sudo lspci 0000:00:0b.0 PCI bridge: Apple Inc. CPC945 PCIe Bridge 0000:0a:00.0 VGA compatible controller: NVIDIA Corporation NV43 [GeForce 6600 LE] (rev a2) 0001:00:00.0 Host bridge: Apple Inc. U4 HT Bridge 0001:00:01.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-X bridge (rev a3) 0001:00:02.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-X bridge (rev a3) 0001:00:03.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3) 0001:00:04.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3) 0001:00:05.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3) 0001:00:06.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3) 0001:00:07.0 PCI bridge: Apple Inc. Shasta PCI Bridge 0001:00:08.0 PCI bridge: Apple Inc. Shasta PCI Bridge 0001:00:09.0 PCI bridge: Apple Inc. Shasta PCI Bridge 0001:01:07.0 Unassigned class [ff00]: Apple Inc. Shasta Mac I/O 0001:01:0b.0 USB controller: NEC Corporation OHCI USB Controller (rev 43) 0001:01:0b.1 USB controller: NEC Corporation OHCI USB Controller (rev 43) 0001:01:0b.2 USB controller: NEC Corporation uPD72010x USB 2.0 Controller (rev 04) 0001:03:0c.0 IDE interface: Broadcom K2 SATA 0001:03:0d.0 Unassigned class [ff00]: Apple Inc. Shasta IDE 0001:03:0e.0 FireWire (IEEE 1394): Apple Inc. Shasta Firewire 0001:05:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03) 0001:05:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03) david@LK37:~$ I tried various ways to install Oracle Java but I always end up with: bash: /usr/bin/java: cannot execute binary file At the moment I have Installed jdk-7u25-linux-x64.tar.gz in /usr/lib/jvm/jdk1.7.0/bin/ as said in this post I already tried the web install but I get a 404 error. I hope you can help me. I started using Ubuntu yesterday so please give me the complete terminal code, it will be a lot easier for me. For those who care I want to play Minecraft and with the OpenJDK I got a java.lang error. That's why I want to install Oracle Java.

  Read the article

• SQL Server MCM is too easy, is it?

  - by simonsabin

  We all know that Brent Ozar did the MCM training/certification over the past few weeks. He wrote an interesting article on Friday about the bad bits ( http://www.brentozar.com/archive/2010/04/sql-mcm-now-bad-stuff/ ) of the training and it lead me to thinking about the certification process again(I often think about it, and it appears often in response to something from Brent http://sqlblogcasts.com/blogs/simons/archive/2010/02/12/Whats-missing-in-the-SQL-Certification-process-.aspx ) This time what...(read more)

  Read the article

• Using a site page to find out the web Template Name used in a SharePoint Site

  - by ybbest

  Today, I have created a SharePoint solution. It deploys a site page with code behind to show the web template name used in a SharePoint site. You can download the project from here. After you have deployed the project, you can see your template name from http://[site collection Name]/sitepage/WebTemplateInfo.aspx References: http://blogs.msdn.com/b/kaevans/archive/2010/06/28/creating-a-sharepoint-site-page-with-code-behind-using-visual-studio-2010.aspx http://www.devexpertise.com/2009/02/06/sharepoint-list-template-ids-and-site-template-ids/ http://blog.rafelo.com/2008/05/determining-site-template-used-on.html

  Read the article

• ArchBeat Link-o-Rama for 2012-04-11

  - by Bob Rhubart

  Oracle Technology Network Developer Day: MySQL - New York www.oracle.com Wednesday, May 02, 2012 8:00 AM – 4:30 PM Grand Hyatt New York 109 East 42nd Street, Grand Central Terminal New York, NY 10017 OTN Architect Day - Reston, VA - May 16 www.oracle.com The live one-day event in Reston, VA brings together architects from a broad range of disciplines and domains to share insights and expertise in the use of Oracle technologies to meet the challenges today’s solution architects regularly face. Registration is free, but seating is limited. InfoQ: Seven Secrets Every Architect Should Know www.infoq.com Frank Buschmann’s secrets: User Tasks-based Design, Be Minimalist, Ensure Visibility of Domain Concepts, Use Uncertainty as a Driver, Design Between Things, Check Assumptions, Eat Your Own Dog Food. Roadmaps for the IT shop’s evolution | Andy Mulholland www.capgemini.com Andy Mulholland discusses "the challenge of new technology and the disruptive change it brings, together with the needs to understand and plan, or even try to gain control of end-users implementations." Drive Online Engagement with Intuitive Portals and Websites | Kellsey Ruppel blogs.oracle.com "The web presence must be able to scale to support the delivery of personalized and targeted content to thousands of site visitors without sacrificing performance," says WebCenter blogger Kellsey Ruppel. "And integration between systems becomes more important as well, as organizations strive to obtain one view of the customer culled from WCM data, CRM data and more." New Exadata Customer Cases | Javier Puerta blogs.oracle.com Javier Puerta shares links to four new customer use cases featuring details on the solutions implemented at each of these sizable companies. Invoicing: It's time to catch up! | Jesper Mol www.nl.capgemini.com Capgemini's Jesper Mol diagrams an e-invoicing solution that includes Oracle Service Bus. Using SAP Adapter with OSB 11g (PS3) | Shub Lahiri blogs.oracle.com Shub Lahiri shares a brief overview outlining the steps required to build such a simple project with Oracle Service Bus 11g and SAP Adapter for the PS3 release. Northeast Ohio Oracle Users Group 2 Day Seminar - May 14-15 - Cleveland, OH www.neooug.org More than 20 sessions over 4 tracks, featuring 18 speakers, including Oracle ACE Director Cary Millsap, Oracle ACE Director Rich Niemiec, and Oracle ACE Stewart Brand. Register before April 15 and save. Thought for the Day "Today, most software exists, not to solve a problem, but to interface with other software." — I. O. Angell

  Read the article

• Ubuntu 12.10 Trackpoint not detected Thinkpad X130e

  - by killerknives

  I just did a fresh install of 12.10 and now only my touchpad works. The trackpoint and Left/Right buttons below the trackpoint do not work. The trackpoint worked fine as of 12.04. I've searched online and there was a hack that said that disabling the touchpad would enable the trackpoint. WRONG! You'll end up having to use the keyboard =/. I don't know what is needed so I'll just dump some stuff. lspci: 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Wrestler [Radeon HD 6310] 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] 00:05.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port 00:06.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port 00:07.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 01:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) I've installged gpointing-device-setting and it only lists the touchpad. No trackpoint. What should I do? What data do you need?

  Read the article

• Neo4J and Azure and VS2012 and Windows 8

  - by Chris Skardon

  Now, I know that this has been written about, but both of the main places (http://www.richard-banks.org/2011/02/running-neo4j-on-azure.html and http://blog.neo4j.org/2011/02/announcing-neo4j-on-windows-azure.html) utilise VS2010, and well, I’m on VS2012 and Windows 8. Not that I think Win 8 had anything to do with it really, anyhews! I’m going to begin from the beginning, this is my first foray into running something on Azure, so it’s been a bit of a learning curve. But luckily the Neo4J guys have got us started, so let’s download the VS2010 solution: http://neo4j.org/get?file=Neo4j.Azure.Server.zip OK, the other thing we’ll need is the VS2012 Azure SDK, so let’s get that as well: http://www.windowsazure.com/en-us/develop/downloads/ (I just did the full install). Now, unzip the VS2010 solution and let’s open it in VS2012: <your location>\Neo4j.Azure.Server\Neo4j.Azure.Server.sln One-way-upgrade? Yer! Ignore the migration report – we don’t care! Let’s build that sucker… Ahhh 14 errors… WindowsAzure does not exist in the namespace ‘Microsoft’ Not a problem right? We’ve installed the SDK, just need to update the references: We can ignore the Test projects, they don’t use Azure, we’re interested in the other projects, so what we’ll do is remove the broken references, and add the correct ones, so expand the references bit of each project: hunt out those yellow exclamation marks, and delete them! You’ll need to add the right ones back in (listed below), when you go to the ‘Add Reference’ dialog make sure you have ‘Assemblies’ and ‘Framework’ selected before you seach (and search for ‘microsoft.win’ to narrow it down) So the references you need for each project are: CollectDiagnosticsData Microsoft.WindowsAzure.Diagnostics Microsoft.WindowsAzure.StorageClient Diversify.WindowsAzure.ServiceRuntime Microsoft.WindowsAzure.CloudDrive Microsoft.WindowsAzure.ServiceRuntime Microsoft.WindowsAzure.StorageClient Right, so let’s build again… Sweet! No errors.   Now we need to setup our Blobs, I’m assuming you are using the most up-to-date Java you happened to have downloaded :) in my case that’s JRE7, and that is located in: C:\Program Files (x86)\Java\jre7 So, zip up that folder into whatever you want to call it, I went with jre7.zip, and stuck it in a temp folder for now. In that same temp folder I also copied the neo4j zip I was using: neo4j-community-1.7.2-windows.zip OK, now, we need to get these into our Blob storage, this is where a lot of stuff becomes unstuck - I didn’t find any applications that helped me use the blob storage, one would crash (because my internet speed is so slow) and the other just didn’t work – sure it looked like it had worked, but when push came to shove it didn’t. So this is how I got my files into Blob (local first): 1. Run the ‘Storage Emulator’ (just search for that in the start menu) 2. That takes a little while to start up so fire up another instance of Visual Studio in the mean time, and create a new Console Application. 3. Manage Nuget Packages for that solution and add ‘Windows Azure Storage’ Now you’re set up to add the code: public static void Main() { CloudStorageAccount cloudStorageAccount = CloudStorageAccount.DevelopmentStorageAccount; CloudBlobClient client = cloudStorageAccount.CreateCloudBlobClient(); client.Timeout = TimeSpan.FromMinutes(30); CloudBlobContainer container = client.GetContainerReference("neo4j"); //This will create it as well   UploadBlob(container, "jre7.zip", "c:\\temp\\jre7.zip"); UploadBlob(container, "neo4j-community-1.7.2-windows.zip", "c:\\temp\\neo4j-community-1.7.2-windows.zip"); }   private static void UploadBlob(CloudBlobContainer container, string blobName, string filename) { CloudBlob blob = container.GetBlobReference(blobName);   using (FileStream fileStream = File.OpenRead(filename)) blob.UploadFromStream(fileStream); } This will upload the files to your local storage account (to switch to an Azure one, you’ll need to create a storage account, and use those credentials when you make your CloudStorageAccount above) To test you’ve got them uploaded correctly, go to: http://localhost:10000/devstoreaccount1/neo4j/jre7.zip and you will hopefully download the zip file you just uploaded. Now that those files are there, we are ready for some final configuration… Right click on the Neo4jServerHost role in the Neo4j.Azure.Server cloud project: Click on the ‘Settings’ tab and we’ll need to do some changes – by default, the 1.7.2 edition of neo4J unzips to: neo4j-community-1.7.2 So, we need to update all the ‘neo4j-1.3.M02’ directories to be ‘neo4j-community-1.7.2’, we also need to update the Java runtime location, so we start with this: and end with this: Now, I also changed the Endpoints settings, to be HTTP (from TCP) and to have a port of 7410 (mainly because that’s straight down on the numpad) The last ‘gotcha’ is some hard coded consts, which had me looking for ages, they are in the ‘ConfigSettings’ class of the ‘Neo4jServerHost’ project, and the ones we’re interested in are: Neo4jFileName JavaZipFileName Change those both to what that should be. OK Nearly there (I promise)! Run the ‘Compute Emulator’ (same deal with the Start menu), in your system tray you should have an Azure icon, when the compute emulator is up and running, right click on the icon and select ‘Show Compute Emulator UI’ The last steps! Make sure the ‘Neo4j.Azure.Server’ cloud project is set up as the start project and let’s hit F5 tension mounts, the build takes place (you need to accept the UAC warning) and VS does it’s stuff. If you look at the Compute Emulator UI you’ll see some log stuff (which you’ll need if this goes awry – but it won’t don’t worry!) In a bit, the console and a Java window will pop up: Then the console will bog off, leaving just the Java one, and if we switch back to the Compute Emulator UI and scroll up we should be able to see a line telling us the port number we’ve been assigned (in my case 7411): (If you can’t see it, don’t worry.. press CTRL+A on the emulator, then CTRL+C, copy all the text and paste it into something like Notepad, then just do a Find for ‘port’ you’ll soon see it) Go to your favourite browser, and head to: http://localhost:YOURPORT/ and you should see the WebAdmin! See you on the cloud side hopefully! Chris PS Other gotchas! OK, I’ve been caught out a couple of times: I had an instance of Neo4J running as a service on my machine, the Azure instance wanted to run the https version of the server on the same port as the Service was running on, and so Java would complain that the port was already in use.. The first time I converted the project, it didn’t update the version of the Azure library to load, in the App.Config of the Neo4jServerHost project, and VS would throw an exception saying it couldn’t find the Azure dll version 1.0.0.0.

  Read the article

• Display Driver Issue on an hp TX2-1160ea Notebook

  - by Sam

  I'm new to Linux and recently switched to Ubuntu 11.04 due to my project requirement. My laptop has been freezing and going to black screen of death when I run anything related to display (Share desktop, stream video, etc). Today I went through the Ubuntu forum to install the appropriate graphic driver and, after doing it, I rebooted my PC. It gave an error before login saying "select the recovery mode" and after clicking OK, it didn't give the same error on reboot but I've lost the 11.04 graphical interface and all I see is the interface of Ubuntu v10 with slow visuals (even scrolling up/down on browser is really slow). For the reference, here's a desktop screenshot so that you can understand the situation. Also the laptop is overheating. How can I fix this problem? How can i get the Ubuntu 11.04 view back? I also tried Google, but couldn't find any issue like this. Some general Information: Laptop: HP TouchSmart TX2-1160ea Processor: AMD Turion TX2 Memory: 4GB OS: Ubuntu 11.04 Some debugging information:: $ report-hw | grep controller lspci -knn: 00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] lspci -knn: 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] lspci -knn: 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612] lspci -knn: 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) lspci -knn: 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) And: $ dpkg -l '*fglrx*' Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-==============-==============-============================================ ii fglrx 2:8.840-0ubunt Video driver for the ATI graphics accelerato ii fglrx-amdcccle 2:8.840-0ubunt Catalyst Control Center for the ATI graphics un fglrx-control <none> (no description available) un fglrx-control- <none> (no description available) ii fglrx-dev 2:8.840-0ubunt Video driver for the ATI graphics accelerato un fglrx-driver <none> (no description available) un fglrx-driver-d <none> (no description available) un fglrx-kernel-s <none> (no description available) un fglrx-modalias <none> (no description available) un xfree86-driver <none> (no description available) un xfree86-driver <none> (no description available) un xorg-driver-fg <none> (no description available) un xorg-driver-fg <none> (no description available) If you need any more information that could help, just ask.

  Read the article

• What is the Endeca MDEX Engine?

  - by Grant Schofield

  Today I would like to draw your attention to a really helpful article by Rittmanmead taking a deeper look under the covers at the Endeca MDEX engine; how it works, what's so different about it, and why that matters to customers. This will in particular be useful for the technical audience. The other articles in the Endeca Week series are equally useful for a wider audience. http://www.rittmanmead.com/2012/02/oracle-endeca-week-what-is-the-endeca-mdex-engine/

  Read the article

• Why am I getting a "network is unreachable" error on Ubuntu Server?

  - by jason328

  I'm a completely new to Ubuntu server and am having a hard time connecting the server to the internet. I first ran ping -n 8.8.8.8 connect:Network is unreachable Then I ran ifconfig Link encap:Local Loopback inet addr:127.0.0.1 Mask 255.0.0.0 inet6 addr: ::1/28Scope:host UP LOOPBACK RUNNING MTU:16436 RX packets:192 errors:0 dropped:0 overruns:0 frame:0 TX packets:192 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:15360 (15.2KB) TX bytes:15360 (15.3KB) Here is ouput for sudo lspci -n 00:00.0 0600: 8086:2580 (rev 04) 00:02.0 0300: 8086:2582 (rev 04) 00:1d.0 0c03: 8086:2658 (rev 03) 00:1d.1 0c03: 8086:2659 (rev 03) 00:1d.0 0c03: 8086:265a (rev 03) 00:1d.0 0c03: 8086:265b (rev 03) 00:1d.0 0c03: 8086:265c (rev 03) 00:1e.0 0604: 8086:244e (rev d3) 00:1e.0 0401: 8086:266e (rev 03) 00:1f.0 0601: 8086:2640 (rev 03) 00:1f.0 0101: 8086:2651 (rev 03) 00:1f.0 0c05: 8086:266a (rev 03) 00:0b.0 0200: 8086:1654 (rev 03) lshw-c network returns WARNING: you should run this program as super-user. *-network DISABLED description:Ethernet interface product: NetXtreme BCM5705_2 Gigabit Ethernet vender: Broadcom Corporation physical id:b bus info:pci@0000:0a:0b.0 logical name: eth0 capabilities: bus_master_cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 firmware=5705-v3.18 latency=32 mingnt=64 multicast=yes port=twister pair lsmod code returned this Module Size Used By e100 37213 0 dm_crypt 23125 1 ppdev 17113 0 psmouse 87603 0 snd_intel8x0 38570 0 snd_ac97_codec 134826 1 snd_intel8x0 ac97_bus 12730 1 snd_ac97_codec snd_pcm 97188 2 snd_intel8x0, snd_ac97_codec serio_raw 13211 0 snd_timer 29990 1 snd_pcm snd 78855 4 snd_intel8x0, snd_ac97_codec, snd_pcm,snd_timer soundcore 15091 1 snd snd_page_alloc 18529 2 snd_intel8x0, snd_pcm ext2 73795 1 parport_pc 32866 1 mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev, parport_pc,lp usbhid 47199 0 hid 99559 1 usbhid tg3 152032 0 i915 468651 1 floppy 70365 0 drm_kms_helper 46978 1 i915 drm 242038 2 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 video 19596 1 i915 Again there is more but it's giving info on the driver itself. I know it works, I've used it. I assume then that my network got disabled when I installed Ubuntu Server. How do I enable it? I checked and the internet cable is connected to the D-link router. I have also used this same computer for internet access when I had Ubuntu Desktop installed so internet does work.

  Read the article

• Ubuntu Dual Screen Using Virtual Machine - AMD GPU

  - by Chris

  I've been searching online and reading tutorials and etc about how to make my ubuntu VM dual screen(x86_64). I have first tried to run these commands: sudo aticonfig --initial -f which gave me the ouput of: sudo: aitconfig: command not found I then googled the output and followed these instructions that I tells me to install my ATI drivers onto my ubuntu. wget http://www2.ati.com/drivers/linux/ati-driver-installer-11-5-x86.x86_64.run sudo sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Ubuntu/natty sudo dpkg -i *.deb sudo apt-get -f install sudo aticonfig -f --initial --adapter=all sudo reboot It all works well until I input sudo apt-get -f install which gives me the following output: sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 25 not upgraded. 3 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up fglrx (2:8.850-0ubuntu1) ... update-alternatives: error: alternative link /usr/bin/aticonfig is already managed by x86_64-linux-gnu_gl_conf. dpkg: error processing fglrx (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of fglrx-amdcccle: fglrx-amdcccle depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-amdcccle (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-dev: fglrx-dev depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-dev (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: fglrx fglrx-amdcccle fglrx-dev E: Sub-process /usr/bin/dpkg returned an error code (1) At this point, I don't know what to do since running: gksudo amdcccle For the record, I have 3D acceleration turned on. The following is my GPU for my VM lspci | grep VGA 00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter Any Help on how I can make my VM dual screen with Ubuntu would be great. Thank you in advance.

  Read the article

• StreamInsight is in all editions (except express)

  - by simonsabin

  Contrary to many posts and even press releases from Microsoft StreamInsight is not just for Data Center edition. It is available in all paid for editions. If you read the license terms http://go.microsoft.com/fwlink/?LinkID=186261&clcid=0x409 you will see you get StreamInsight in all paid editions. Whats confusing is the performance/limitations in each edition. The only reference I could find of these limitations is here http://blogs.msdn.com/b/streaminsight/archive/2010/02/10/streaminsight-versions...(read more)

  Read the article

• ArchBeat Link-o-Rama for 2012-04-05

  - by Bob Rhubart

  Webcast: Oracle Maximum Availability Architecture Best Practices event.on24.com Date: Thursday, April 12, 2012 Time: 10:00 AM PDT Oracle expert Tom Kyte discusses how Oracle’s Maximum Availability Architecture can help to minimize the costs and risk of downtime. Oracle Enterprise Manager Ops Center 12c Launch - Interactive Webcast and Live Chat www.oracle.com Thursday, April 12, 2012. 9 a.m. PT / 12 p.m. ET / 4 p.m. GMT. Speakers: Steve Wilson (VP Systems Management, Oracle) John Fowler (Exec VP Systems, Oracle) Brad Cameron (VP Development, Oracle Fusion Middleware) Bill Nesheim (VP Oracle Solaris) Dennis Reno (VP Customer Portal Experience, Oracle) Mike Wookey (Chief Architect, Oracle Enterprise Manager Ops Center) Prasad Pai (Sr Director, Oracle Enterprise Manager Ops Center) 2012 Real World Performance Tour Dates |Performance Tuning | Performance Engineering www.ioug.org Coming to your town: a full day of real world database performance with Tom Kyte, Andrew Holdsworth, and Graham Wood. Rochester, NY - March 8 Los Angeles, CA - April 30 Orange County, CA - May 1 Redwood Shores, CA - May 3 Oracle Technology Network Developer Day: MySQL - New York www.oracle.com Wednesday, May 02, 2012 8:00 AM – 4:30 PM Grand Hyatt New York 109 East 42nd Street, Grand Central Terminal New York, NY 10017 Webcast Series: Data Warehousing Best Practices event.on24.com April 19, 2012 - Best Practices for Workload Management of a Data Warehouse on Oracle Exadata May 10, 2012 - Best Practices for Extreme Data Warehouse Performance on Oracle Exadata How to create a Global Rule that stores a document’s folder path in a custom metadata field | Nicolas Montoya blogs.oracle.com An illustrated how-to from Oracle Fusion Middleware A-Team blogger Nicolas Montoya. Get Proactive with Fusion Middleware | Daniel Mortimer blogs.oracle.com Daniel Mortimer shows how to access "a one stop shop for navigating to proactive support material, tools, and communication channels related to Oracle Fusion Middleware." Build an enterprise on 'other peoples' work', via SOA and cloud | Joe McKendrick www.zdnet.com Are you down with OPW? Joe McKendrick's synopsis of a recent presentation by David Linthicum focuses on reuse. Oracle Fusion Middleware Security: Unsolicited login with OAM 11g | Chris Johnson fusionsecurity.blogspot.com Chris Johnson shows how to create a shopping cart login model using "plain old HTML." How to use the Human WorkFlow Web Services | Edwin Biemond biemond.blogspot.com Oracle ACE Edwin Biemond shows how to invoke two WorkFlow web services to query the Human task in Oracle SOA Suite with your own ordering and restrictions. Bad Practice Use Case for LOV Performance Implementation in ADF BC | Andrejus Baranovskis andrejusb.blogspot.com "If you want to learn something well, there is nothing better [than] to learn bad practices first," says Oracle ACE Director Andrejus Baranovskis. Thought for the Day "The best meetings get real work done. When your people learn that your meetings actually accomplish something, they will stop making excuses to be elsewhere." — Larry Constantine

  Read the article

• APress Deal of the Day 2/June/2014 - Pro SQL Server 2012 Integration Services

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2014/06/02/apress-deal-of-the-day-2june2014---pro-sql-server.aspxToday’s $10 Deal of the Day from APress at http://www.apress.com/9781430236924 is Pro SQL Server 2012 Integration Services. “Pro SQL Server 2012 Integration Services is your key to building powerful extract, transform, load (ETL) solutions using SQL Server 2012 Integration Services (SSIS).”

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >