Search Results

Search found 2774 results on 111 pages for 'adapter'.

Page 72/111 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Wireless network unavailable, no networks found after Windows update

  - by jacobsee

  Old Dell Inspiron 8200 laptop with Linksys Wireless G network adapter card (WPC54G v2). Wireless connection was working fine. Then I ran a bunch of windows updates, I think the last one was the recent .NET 3.5 service pack update. Now wireless networks won't connect. Using windows to manage wireless, no networks show up. I'm typing right now on another laptop where wireless is working fine. I've restarted router & Dell laptop several times. Tried to Repair wireless connection and refresh network list. Also restarted DHCP and WZC service, all to no avail. I then uninstalled .NET 3.5 SP (don't remember number) and .NET 3.0 SP2. I don't remember all the windows updates that I just ran because I haven't used this laptop in a while so had to catch up on some updates.

  Read the article

• Wireless is not currently enabled

  - by ikartik90

  I have a HP Pavilion TX2000 tablet PC with me with windows 7 OS running on it. I used to access the Internet using my D-Link DIR 615 wireless adapter on the tablet and it used to work quite fine until one day, when I hibernated my Windows 7, the wireless went off and the problem seems to persist even after my hard efforts to clear it. I checked if the router works fine, and yes it did as my iPod was still catching wireless signals on the other hand, when I checked mu device manager, I realized that I now had no wireless driver. I checked on HP's website for one, but ironically even they didn't have wireless drivers meant for my tablet for Windows 7. Please help me find a solution to this problem. Further queries will be entertained as frequently as possible. Thanks.

  Read the article

• xorg DPMS off: keep VT from turning screen back on

  - by Metiu

  I have an embedded board with a small UPS. When AC power goes down, I need to turn off all power hungry devices in order to have a clean shutdown. First thing I do, is set DPMS to force powerdown, then go through the usual SIGTERM/SIGKILL/umount sequence. I have an Intel i915 Display adapter connected to an LVDS LCD panel. Unfortunately, when Xorg dies, Xserver or the VT code turn the LCD panel back on. I even tried working around it by directly poking the panel enable register in the Display chip, so that X doesn't know about it, but the panel goes back on when the VT comes back. Is there any "legal" way of keeping the display off? Thank you

  Read the article

• Can't connect to wireless-n in dual mode.

  - by Tyllyn

  I recently purchased a Acer Aspire Revo AR3610-U9022. This little nettop uses a Atheros AR5B91 Wireless Network Adapter. I also have a Netgear RangeMax NEXT Wireless Route (model WNDR3300). I have been using this router in dual mode (11G and 11N) on my normal desktop without a problem (Mode: Up to 270Mbps at 5GHz & 54Mbps at 2.4 GHz), but doing this, my Revo won't detect the 11N network as being around... my desktop still does, but the Revo, nope... just the 11G. However, when I switch my router over to just "Up to 270Mbps at 2.4GHz", it kills the 11G entirely, but the Revo recognizes the 11N network. I'm a programmer by trade, and this hardware-y stuff confuses me more than it should. Is there any way that I could set this stuff up so my Revo can connect to the 11N part of my router, but keep the 11G around? :) Thanks!

  Read the article

• How can I reinstall QoS Packet Scheduler if it was removed from the winxp installation by nLite?

  - by Irwin1138

  I have a WinXP SP3 installation modified by nLite. This particular installation was stripped off the QoS Packet Scheduler. I was advised to remove QoS because of the overhead it produces or something like that. Now, I read this lifehacker post about windows maintenance, and it says that on the contrary, by doing so I may have done more harm than good: Disabling QoS in Windows XP: Rumor had it that Microsoft had permanently tied up 20 percent of your net bandwidth for Windows Update. They didn't, and those who disable QoS, or IPv6, in XP actually end up with some pretty harsh connectivity problems. I tend to believe this, and now I seek a way to reinstall QoS. I tried to install it by going to network adapter properties - install - service, but there is no QoS there. I have the original, untouched WinXP SP3 cd. So, is there a way to bring back QoS into my WinXP installation, preferably without reinstalling windows from scratch?

  Read the article

• Black stripe appears to the right of the screen, impossible to get rid of

  - by Gabriele Cirulli

  After clicking the "Auto Config" button on my Acer AL2216w screen a stripe appeared on the right of the screen where the screen doesn't "exist" and I can't seem to take the screen viewport back even by using the OCD setting and moving it to the right. The left part of the screen is also hidden and I'm not able to see what's going on there. The PC is connected to the screen through a DVI adapter and a VGA cable. I also use multiple monitors and this is the second monitor. Anyway this seems not to be a related issue, as this used to happen even when I only had a single monitor. I managed to fix this issue once but it was more than two years ago and I can't remember what I did, and out of all of the things I've tried so far (connecting the screen to another PC and performing auto adjustment, switching the cables, etc.) none worked. Here's how it looks: Can anyone help me fix this?

  Read the article

• Can't communicate with Primary DNS Server

  - by horsley

  A computer, with Windows 7, can't access any website by domain suddenly. Whether this computer use a wired link or connect to the WLAN, The fault persists IP and DNS obtained automatically, and seems normal (ipconfig /all return the correct info) I can visit websites by using HTTP proxy The DNS server is available, other computer in my room works properly. I can ping myself, the gateway and any other IP, but domains I can use nslookup and obtain the correct IP info There are some error information in the event log about dns client events explaining the client can not verify the DNS server available Windows network diagnosis explain that Windows can't communicate with the device or resource (Primary DNS Server) I guess the dns client should be blame. I tried to do the following things but the fault persist. Reinstall the driver of network adapter Reset TCP/IP (netsh int ip reset) Reset Winsock (netsh winsock reset) Reset LSP I don't want to reinstall the whole os, what should I do?

  Read the article

• bluetooth doesn't turn off during sleep in Windows 7

  - by lajos

  I have a Bluetooth USB dongle on a Windows 7 laptop. I did not install any Bluetooth drivers, so I assume that the device is using the Microsoft stack. When the computer goes to sleep, the Bluetooth adapter stays on. I don't want Bluetooth devices to wake the computer, so I want sleep to turn off the dongle, but I can't find power management options for Bluetooth in the Control Panel and Device Manager. I also have an issue where the computer doesn't reach full sleep mode, I'm hoping that turning Bluetooth off will solve that problem, too. How can I turn off Bluetooth during sleep?

  Read the article

• How to Connect Firewire Camcorder to Laptop without firewire port

  - by bdk

  I Have a Sony Camcorder w/ a 4-pin firewire output. I have HP laptop I want to use it with, but the laptop, does not have a firewire port, just VGA, HDMI, USB, ESATA, Ethernet, and Modem. In addition, It doesn't have a PC Card slot for adding a Firewire card. Googling for "Firewire to USB adapter" returns a lot of hits, but no product that seems to do what I want. I assume I need a USB dongle that gives a firewire port and has drivers so that the PC sees it as a regular firewire port. Thanks for any recommendations

  Read the article

• Why cant I get 3 monitors working with my ati 5770

  - by G-Dogg

  I have an ati 5770, card with vga, dvi and hdmi output. I can only get 2 out of the 3 monitors working at once, however i can change the configuation so that all monitors can be selected, but only 2 will work at once.. 2 of my monitors have dvi inputs and one has vga. in my catyalist control center it shows all 3 monitors are there but either 2 can be selected at a time, and so the same with my windows 7. I have and adapter which i use on the 3rd monitor, hdmi-dvi adaptor and it works. also when i boot up my pc i get 2 monitors booting up and when windows starts the 3rd monitor boots but the 1st one closes. I looked at my package box and it actualy does specify ati eyefinity technology is available with this card. why wont it work???

  Read the article

• Virtual PC - Display Issue with Ubuntu Server

  - by Christopher R

  Hi Everyone, I just did a clean install of Ubuntu Server 9.04 in Virtual PC on the Windows 7 RC, and it seems to be having a bit of an issue with the virtual machine's display adapter. I've tried setting a VGA flag in the GRUB configuration to no avail. This is a guess, but I think it has something to do with the color console mode that gets enabled by default at boot time. The system starts booting just fine (i.e. the console looks "normal" when I'm asked to enter an LVM passphrase, etc.), but then the display goes wonky after a few seconds and I end up with this. Typing commands in bash works just fine: it's not like the system is frozen or anything, I just can't see anything that I type. The console looks exactly the way it does in the image below.

  Read the article

• XP Mode as a server, Win 7 as a client

  - by Spyro

  I have two virtual machines (XP Mode). They are connected to each other by a network setting - Internal Network. It is the only working setting. This is the only way I got two virtual XP to ping each other. Now I want to connect each of them from the application that runs on Windows 7 which is hosting both virtual machines, but I can't do that. The firewall on both XP-Mode machines is disabled. Any other networking setting added as additional adapter on Xp-Mode machine does not allow me to connect from Windows 7. So my question is this - how to enable connection from Windows 7 application to XP mode application (client - server)? Point 2 (pass message) work perfectly because of the "internal network" setting. The problem is point 1 and 3.

  Read the article

• GRUB error: unknown filesystem

  - by Ali

  I replaced my old laptop drive which was win7 and ubuntu dual boot with an SSD. Now I connected the old drive through a USB adapter and I want to boot from it. But this comes up: unknown filesystem grub rescue> As i need the programs from old drive I have to boot from it time to time and I don't want to install those software on the new drive. It takes so time to exchange the drives so I want to boot from USB. how can I fix this?

  Read the article

• CentOS connect to the internet

  - by Delirium tremens

  I installed CentOS, but it didn't automatically connect to the internet. Is that the normal behavior? I have Ethernet Broadband Router DI-604 and WebStar DPX2203 series Cablemodem with EMTA . What should I do to connect to the internet? Update: A cousin told me my ethernet adapter or network board will depend on my motherboard. My computer upgrade document says the motherboard is gigabyte video onboard. I heard gigabyte's network adapters are Gigabit or Realtek. In CentOS, System - Administration - Network - New - Ethernet, first, only "Other Network Board" was listed, so I selected it and clicked Next, then there wasn't Gigabit, but there was Realtek, so I selected Realtek. I heard with Net Virtua selecting dhcp the things first answered asked me to tell first answerer are automatically configured. So I tried Realtek with dhcp, but it still didn't work.

  Read the article

• "Request not supported" in IPCONFIG (WinXP SP3)

  - by pablog

  In a customer PC (Windows XP SP3), suddenly the network went down: the network adapter appears with an error mark. I replaced the network card, but the new one does the same thing. When I enter IPCONFIG, XP shows this error (in standard and safe mode): Internal error occurred Request not supported Unable to query host name If I start the system with a boot cd the PC runs fine, so the problem seems to be in the XP installation. I tried: uninstalling and reinstalling the network card in the Device Manager disabling and reenabling the card netsh int ip reset netsh winsock reset catalog and a couple of "reset" programs (WinsockxpFix.exe, etc) with no luck. Is there any way to fix it without reinstalling XP? TIA, Pablo

  Read the article

• Can't connect to VPN in Windows XP mode

  - by darkstar13

  I have Windows 7 x32 installed on my laptop. I have also Windows XP mode installed. My setup is that my work-remote programs are in Windows XP mode because my VPN installer in Windows XP only. Lately, I have been having troubles getting on / logging in to VPN. I can access the internet in WinXP mode but When I ping the IP address of the target IP of my VPN network (or even just Google.com), I always get a 'Request Timeout'. However, when I ping the same IP address in command prompt in Windows 7, I get 100% data sent. Is there anything I need to adjust? Before, I have been able to connect instantly. Now, it's like trial and error, or I will have to wait for hours just to be able to enter logon credentials in Cisco VPN dialer. NAT is my network adapter in XP mode.

  Read the article

• Mac Parallels - Bridged network

  - by Jack

  I am new to Apple and my task is to install VMs on a Mac server. I am trying to install 4 VMs and I want them to have separate IPs and be visible on the network as separate machines. What are my options? My research shows me that I can use a bridged network, but I have to select an adapter. I have only two network adapters, does that mean I can only have 2 VMs? And when I configure the 2 VMS, will my actual server have internet connection? Or does it use the Mac's address?

  Read the article

• Setting up routing for MS DirectAccess to a VMWare EsXi Host

  - by Paul D'Ambra

  I'm trying to set up DirectAccess on a virtual machine so I can demonstrate it's value and then if need be add a physical machine to host it. I'm hitting a problem because the Direct Access machine (DA01) needs to have 2 public addresses actually configured on the external adapter but there is a Zyxel Zywall USG300 between the VMware ESXi host and the outside world. I've summarised my setup in this diagram If I ping from the LAN to 212.x.y.89 I get a response but if I ping from the VM I get destination host unreachable. I used "route add 212.x.y.89 192.c.d.1" and get request timed out. At that point I see outbound traffic allowed on the Zyxel firewall but nothing coming back. I'm past my understanding of routing and VMWare so am not sure how to tie down where my problem lies (or even if this setup is possible). So any help massively appreciated. Paul

  Read the article

• Windows XP periodically disconnects, reconnects; Windows 7 doesn't

  - by einpoklum

  My setup: I have a PC with a Gigabyte GA-MA78S2H motherboard (Realtek Gigabit wired Ethernet on-board). I have the latest drivers (at least the latest driver for the NIC. I'm connecting via an Edimax BR-6216Mg (again, wired connection). For some reason I experience short periodic disconnects and reconnects. Specifically, Skype disconnects, tries to connect, succeeds after a short while; incoming SFTP sessions get dropped; using a browser, I sometime get stuck in the DNS lookup or connection to the website and a page won't load. A couple of seconds later, a reload works. All this happens with Windows XP SP3. With Windows 7, it doesn't happen. The connection is smooth (OS is sluggish though, but never mind that). Like I said, I updated the NIC driver. I tried reducing the MTU (used something called Dr. TCP), thinking maybe that would help, but it didn't. (I'm a bit but not super-knowledgeable about TCP parameters.) I'm guessing it's either a problem with the driver or some settings which are different between the two OSes. ipconfig for my adapter: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1D-7D-E9-72-9E Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.254 DHCP Server . . . . . . . . . . . : 192.168.0.254 DNS Servers . . . . . . . . . . . : 192.117.235.235 62.219.186.7 Lease Obtained. . . . . . . . . . : Saturday, March 10, 2012 8:28:20 AM Lease Expires . . . . . . . . . . : Friday, January 26, 1906 2:00:04 AM

  Read the article

• Wrong source IP when accessing internet directly from TMG server

  - by jarod1701

  Hi everyone, after implementing a ForeFront TMG server I'm facing only one problem: After I added a second IP to the external adapter I had to manually set "NAT Address Selection" inside the network rule "Internet Access" to the first IP since all others would get blocked by the CISCO firewall. This configuration works as long as traffic comes from the internal network (e.g. browser on clients). Traffic from the TMG directed to the internet always carries the second IP as it's source address and gets blocked. All our other TMGs/ISAs are running fine and I never came across this problem- Does anybody have a clue, coz I don't?! Kevin

  Read the article

• Wireless Network Connection gets dropped at times under Windows 7

  - by n179911

  I have running Windows 7 on my hp laptop with 802.11n wifi adapter. Some times, I lost wireless internet connection. Under the 'Wireless Connection' when I click the notification area, it said 'my home network is 'connected'... But in the header 'currently Connected to' it said 'no internet access' instead of 'internet access' I can 'fix' my problem by going to the 'wireless connection' my home network, click 'disconnect' and then click 'connect'. And when it comes back up, it gets connected again. any idea how can i fix this problem? Thank you.

  Read the article

• How to share internet connection on Mac os x to Virtualbox vm’s using Host-only

  - by redben

  In one line : is the following possible : Airport <- "osx bridge" - vbox-Host-only - vm's Virtualbox (3.1.4) setup : Host : Mac OS X 10.5 Guest : Ubuntu Linux adapter1 - Bridged (en1: Airport) : To give the vm access to internet and communicate when Airport is connected adapter2 - Host-Only (vboxnet0) : To enable host/guest communication when Airport is not connected I'd like to make it simpler and only keep adapter 2 (host-only) and relying on os x connection sharing/bridging I thought i could just keep the Host only configuration, and on the host go to internet sharing and select "share from airport" to vboxnet0 . Only to find out that vbox's virtual interface doesn't appear in the interfaces list on os x preferences. I know that on a linux host you could install something called bridge-utils and use that to bridge the two insterfaces. Is there any thing like that for Mac ?

  Read the article

• How to give virtual machine access to the Internet, but block from LAN?

  - by Pekka

  I am setting up a virtual machine using Microsoft Virtual PC in Windows 7. The VM will run a Windows XP. I want to set up a public-facing server in it for web pages, subversion and other things, and instruct the router to port forward any requests to that Virtual Machine. I managed to do that - I assigned the VM to the network adapter, and it is now acting as just another DHCP client - but to increase security I would like to block the VM from the rest of the LAN, so it accepts only incoming connections from the Internet. For this to be effective in case of a compromise, it would have to happen on VM level as far as I can see. Can this be done?

  Read the article

• How to force laptop mode on/off

  - by Vi

  root@vi-notebook:/home/vi# laptop_mode start force Laptop mode enabled, not active How to start laptop mode? It starts successfully when AC adapter is removed, but not by explicit command. The system is GNU/Linux Debian i386 squeeze (not up to date), 2.6.30-zen2-31270-gc7099db-dirty, Acer Extensa 5220. Update: Changed to ENABLE_LAPTOP_MODE_ON_AC=1 in /etc/laptop_mode/laptop-mode.conf, now it is turned on always. But I can't turn it off with laptop_mode stop force, it stays turned on anyway. How do I turn it off again?

  Read the article

• Installing a Wl-138g wireless NIC on ubuntu server

  - by Narcolapser

  So I have this little server that I've been working on as a hobby. But due to changes in living arrangements I have move and it won't have access to a wired lan. So I need to install a wireless adapter i had sitting around. But most tutorials I have run across are either out dated, or about ubuntu desktop and talk about things using a GUI. So my question is firstly is there a utility for identifying and downloading drivers for new hardware. that would save my having this problem in the future. If not, how do i go about installing said wireless NIC? ~N

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >