Search Results

Search found 1859 results on 75 pages for 'bill tx'.

Page 72/75 | < Previous Page | 68 69 70 71 72 73 74 75  | Next Page >

  • Agile Awakenings and the Rules of Agile

    - by Robert May
    For those that care, you can read my history of management and technology to understand why I think I’m qualified to talk about this at all.  It’s boring, so feel free to skip it. Awakenings I first started to play around with the idea of “agile” in 2004 or 2005.  I found a book on the Rational Unified Process that I thought was good, and attempted to implement parts of it.  I thought I was agile, but really, it wasn’t.   I still didn’t understand the concept of a team.  I still wanted to tell the team what to do and how to get it done.  I still thought I was smarter than the team. After that job, I started work on another project and began helping that team.  The first few months were really rough.  We were implementing Scrum, which was relatively new to everyone on the team, and, quite frankly, I was doing a poor job of it.  I was trying to micro-manage every aspect of the teams work, and we were all miserable. The moment of change came when the senior architect bailed on the project.  His comment to me was: “This isn’t Agile.  Where are the stand-ups?  Where are the stories?”  He was dead on, and I finally woke up.  I finally realized that I was the problem!  I wasn’t trusting the team.  I wasn’t helping the team.  I was being a manager. Like many (most?), I was claiming to be Agile and use Scrum, but I wasn’t in fact following the rules Scrum.  Since then, I’ve done a lot of studying, hands on practice, coaching of many different teams, and other learning around Scrum, and I have discovered that Scrum has some rules that must be followed for success, even though the process is about continuous improvement. I’ve been practicing Scrum right for about 4 years now and have helped multiple teams implement it successfully, so what you’re about to get is based on experience, rather than just theory. The Rules of Scrum In my experience, what I’ve found is that most companies that claim to be doing Scrum or Agile are actually NOT doing either.  This stems largely because they think that they can “adopt the rules of Agile that fit their organization.”  Sadly, many of them think that this means they can adopt iterations (sprints) and not much else.  Either that, or they think they can do whatever they want, or were doing before, and call it Scrum.  This is simply not true. Here are some rules that must be followed for you to really be doing Scrum.  I’ll go into detail on each one of these posts in future blog posts and update links here.  My intent is that this will help other teams implementing scrum to see more success. Agile does not allow you to do whatever you want A Product Owner is required A ScrumMaster is required The team must function as a Team, and QA must be part of the team Support from upper management is required A prioritized product backlog is required A prioritized sprint backlog is required Release planning is required Complete spring planning is required Showcases are required Velocity must be measured Retrospectives are required Daily stand-ups are required Visibility is absolutely required For now, I think that’s enough, although I reserve the right to add more.  If you’re breaking any of these rules, you’re probably not doing Scrum.  There are exceptions to these rules, but until you have practiced Scrum for a while, you don’t know what those exceptions are. Breaking the Rules Many teams break these rules because they are the ones that expose the most pain.  Scrum is not Advil.  It’s not intended to mask the pain, its intended to cure it.  Let me explain that analogy a bit more.  Recently, my 7 year old son broke his arm, quite severely (see the X-Ray to the right).  That caused him a great deal of pain.  We went first to one doctor, and after viewing the X-Ray, they determined that there was no way that they’d cast the arm at their location.  It was simply too bad of a break for them to deal with.  They did, however, give him some Advil for the pain and put a splint on his arm to stabilize the broken bones.  Within minutes, he was feeling much better.  Had we been stupid, we could have gone home and he’d have been just as happy as ever . . . until the pain medication wore off or one of his siblings touched the splint.  Then, all of that pain would come right back to the top.  Sure, he could make it go away by just taking more Advil and moving the splint out of the way, but that wasn’t going to fix the problem permanently. We ended up in an emergency room with a doctor who could fix his arm.  However, we were warned that the fix was going to be VERY painful, and it was.  Even with heavy sedation (Propofol), my son was in enough pain that he squirmed and wiggled trying to get his arm away from the doctor.  He had to endure this pain in order to have a functional arm. But the setting wasn’t the end.  He had to have several casts, had to have it re-broken once, since the first setting didn’t take and finally was given a clean bill of health. Agile implementation is much like this story.  Agile was developed as a result of people recognizing that the development methodologies that were currently in place simply were ineffective.  However, the fix to the broken development that’s been festering for many years is not painless.  Many people start Agile thinking that things will be wonderful.  They won’t!  Agile is about visibility, and often, it brings great pain to surface.  It causes all of the missed deadlines, the cowboy coders, the coasters, the micro-managers, the lazy, and all of the other problems that are really part of your development process now to become painfully visible to EVERYONE.  Many people don’t like this exposure.  Agile will make the pain better, but not if you remove the cast (the rules above) prematurely and start breaking the rules that expose the most pain.  The healing will take time and is not instant (like Advil).  Figuring out what the true source of pain and fixing it is very valuable to you, your team, and your company.  Remember as you’re doing this that Agile isn’t the source of the pain, it’s really just exposing it.  Find the source. My recommendation is that ALL of these rules are followed for a minimum of six months, and preferably for an entire year, before you decide to break any of these rules.  Get a few good releases under your belt.  Figure out what your velocity is and start firing as a team.  Chances are, after you see agile really in action, you won’t want to break the rules because you’ll see their value. More Reading Jean Tabaka recently published a list of 78 Things I Have Learned in 6 Years of Agile Coaching.  Highly recommended. Technorati Tags: Agile,Scrum,Rules

    Read the article

  • Validating a linked item&rsquo;s data template in Sitecore

    - by Kyle Burns
    I’ve been doing quite a bit of work in Sitecore recently and last week I encountered a situation that it appears many others have hit.  I was working with a field that had been configured originally as a grouped droplink, but now needed to be updated to support additional levels of hierarchy in the folder structure.  If you’ve done any work in Sitecore that statement makes sense, but if not it may seem a bit cryptic.  Sitecore offers a number of different field types and a subset of these field types focus on providing links either to other items on the content tree or to content that is not stored in Sitecore.  In the case of the grouped droplink, the field is configured with a “root” folder and each direct descendant of this folder is considered to be a header for a grouping of other items and displayed in a dropdown.  A picture is worth a thousand words, so consider the following piece of a content tree: If I configure a grouped droplink field to use the “Current” folder as its datasource, the control that gets to my content author looks like this: This presents a nicely organized display and limits the user to selecting only the direct grandchildren of the folder root.  It also presents the limitation that struck as we were thinking through the content architecture and how it would hold up over time – the authors cannot further organize content under the root folder because of the structure required for the dropdown to work.  Over time, not allowing the hierarchy to go any deeper would prevent out authors from being able to organize their content in a way that it would be found when needed, so the grouped droplink data type was not going to fit the bill. I needed to look for an alternative data type that allowed for selection of a single item and limited my choices to descendants of a specific node on the content tree.  After looking at the options available for links in Sitecore and considering them against each other, one option stood out as nearly perfect – the droptree.  This field type stores its data identically to the droplink and allows for the selection of zero or one items under a specific node in the content tree.  By changing my data template to use droptree instead of grouped droplink, the author is now presented with the following when selecting a linked item: Sounds great, but a did say almost perfect – there’s still one flaw.  The code intended to display the linked item is expecting the selection to use a specific data template (or more precisely it makes certain assumptions about the fields that will be present), but the droptree does nothing to prevent the author from selecting a folder (since folders are items too) instead of one of the items contained within a folder.  I looked to see if anyone had already solved this problem.  I found many people discussing the problem, but the closest that I found to a solution was the statement “the best thing would probably be to create a custom validator” with no further discussion in regards to what this validator might look like.  I needed to create my own validator to ensure that the user had not selected a folder.  Since so many people had the same issue, I decided to make the validator as reusable as possible and share it here. The validator that I created inherits from StandardValidator.  In order to make the validator more intuitive to developers that are familiar with the TreeList controls in Sitecore, I chose to implement the following parameters: ExcludeTemplatesForSelection – serves as a “deny list”.  If the data template of the selected item is in this list it will not validate IncludeTemplatesForSelection – this can either be empty to indicate that any template not contained in the exclusion list is acceptable or it can contain the list of acceptable templates Now that I’ve explained the parameters and the purpose of the validator, I’ll let the code do the rest of the talking: 1: /// <summary> 2: /// Validates that a link field value meets template requirements 3: /// specified using the following parameters: 4: /// - ExcludeTemplatesForSelection: If present, the item being 5: /// based on an excluded template will cause validation to fail. 6: /// - IncludeTemplatesForSelection: If present, the item not being 7: /// based on an included template will cause validation to fail 8: /// 9: /// ExcludeTemplatesForSelection trumps IncludeTemplatesForSelection 10: /// if the same value appears in both lists. Lists are comma seperated 11: /// </summary> 12: [Serializable] 13: public class LinkItemTemplateValidator : StandardValidator 14: { 15: public LinkItemTemplateValidator() 16: { 17: } 18:   19: /// <summary> 20: /// Serialization constructor is required by the runtime 21: /// </summary> 22: /// <param name="info"></param> 23: /// <param name="context"></param> 24: public LinkItemTemplateValidator(SerializationInfo info, StreamingContext context) : base(info, context) { } 25:   26: /// <summary> 27: /// Returns whether the linked item meets the template 28: /// constraints specified in the parameters 29: /// </summary> 30: /// <returns> 31: /// The result of the evaluation. 32: /// </returns> 33: protected override ValidatorResult Evaluate() 34: { 35: if (string.IsNullOrWhiteSpace(ControlValidationValue)) 36: { 37: return ValidatorResult.Valid; // let "required" validation handle 38: } 39:   40: var excludeString = Parameters["ExcludeTemplatesForSelection"]; 41: var includeString = Parameters["IncludeTemplatesForSelection"]; 42: if (string.IsNullOrWhiteSpace(excludeString) && string.IsNullOrWhiteSpace(includeString)) 43: { 44: return ValidatorResult.Valid; // "allow anything" if no params 45: } 46:   47: Guid linkedItemGuid; 48: if (!Guid.TryParse(ControlValidationValue, out linkedItemGuid)) 49: { 50: return ValidatorResult.Valid; // probably put validator on wrong field 51: } 52:   53: var item = GetItem(); 54: var linkedItem = item.Database.GetItem(new ID(linkedItemGuid)); 55:   56: if (linkedItem == null) 57: { 58: return ValidatorResult.Valid; // this validator isn't for broken links 59: } 60:   61: var exclusionList = (excludeString ?? string.Empty).Split(','); 62: var inclusionList = (includeString ?? string.Empty).Split(','); 63:   64: if ((inclusionList.Length == 0 || inclusionList.Contains(linkedItem.TemplateName)) 65: && !exclusionList.Contains(linkedItem.TemplateName)) 66: { 67: return ValidatorResult.Valid; 68: } 69:   70: Text = GetText("The field \"{0}\" specifies an item which is based on template \"{1}\". This template is not valid for selection", GetFieldDisplayName(), linkedItem.TemplateName); 71:   72: return GetFailedResult(ValidatorResult.FatalError); 73: } 74:   75: protected override ValidatorResult GetMaxValidatorResult() 76: { 77: return ValidatorResult.FatalError; 78: } 79:   80: public override string Name 81: { 82: get { return @"LinkItemTemplateValidator"; } 83: } 84: }   In this blog entry, I have shared some code that I found useful in solving a problem that seemed fairly common.  Hopefully the next person that is looking for this answer finds it useful as well.

    Read the article

  • 202 blog articles

    - by mprove
    All my blog articles under blogs.oracle.com since August 2005: 202 blog articles Apr 2012 blogs.oracle.com design patch Mar 2012 Interaction 12 - Critique Mar 2012 Typing. Clicking. Dancing. Feb 2012 Desktop Mobility in Hospitals with Oracle VDI /video Feb 2012 Interaction 12 in Dublin - Highlights of Day 3 Feb 2012 Interaction 12 in Dublin - Highlights of Day 2 Feb 2012 Interaction 12 in Dublin - Highlights of Day 1 Feb 2012 Shit Interaction Designers Say Feb 2012 Tips'n'Tricks for WebCenter #3: How to display custom page titles in Spaces Jan 2012 Tips'n'Tricks for WebCenter #2: How to create an Admin menu in Spaces and save a lot of time Jan 2012 Tips'n'Tricks for WebCenter #1: How to apply custom resources in Spaces Jan 2012 Merry XMas and a Happy 2012! Dec 2011 One Year Oracle SocialChat - The Movie Nov 2011 Frank Ludolph's Last Working Day Nov 2011 Hans Rosling at TED Oct 2011 200 Countries x 200 Years Oct 2011 Blog Aggregation for Desktop Virtualization Oct 2011 Oracle VDI at OOW 2011 Sep 2011 Design for Conversations & Conversations for Design Sep 2011 All Oracle UX Blogs Aug 2011 Farewell Loriot Aug 2011 Oracle VDI 3.3 Overview Aug 2011 Sutherland's Closing Remarks at HyperKult Aug 2011 Surface and Subface Aug 2011 Back to Childhood in UI Design Jul 2011 The Art of Engineering and The Engineering of Art Jul 2011 Oracle VDI Seminar - June-30 Jun 2011 SGD White Paper May 2011 TEDxHamburg Live Feed May 2011 Oracle VDI in 3 Minutes May 2011 Space Ship Earth 2011 May 2011 blog moving times Apr 2011 Frozen tag cloud Apr 2011 Oracle: Hardware Software Complete in 1953 Apr 2011 Interaction Design with Wireframes Apr 2011 A guide to closing down a project Feb 2011 Oracle VDI 3.2.2 Jan 2011 free VDI charts Jan 2011 Sun Founders Panel 2006 Dec 2010 Sutherland on Leadership Dec 2010 SocialChat: Efficiency of E20 Dec 2010 ALWAYS ON Desktop Virtualization Nov 2010 12,000 Desktops at JavaOne Nov 2010 SocialChat on Sharing Best Practices Oct 2010 Globe of Visitors Oct 2010 SocialChat about the Next Big Thing Oct 2010 Oracle VDI UX Story - Wireframes Oct 2010 What's a PC anyway? Oct 2010 SocialChat on Getting Things Done Oct 2010 SocialChat on Infoglut Oct 2010 IT Twenty Twenty Oct 2010 Desktop Virtualization Webcasts from OOW Oct 2010 Oracle VDI 3.2 Overview Sep 2010 Blog Usability Top 7 Sep 2010 100 and counting Aug 2010 Oracle'izing the VDI Blogs Aug 2010 SocialChat on Apple Aug 2010 SocialChat on Video Conferencing Aug 2010 Oracle VDI 3.2 - Features and Screenshots Aug 2010 SocialChat: Don't stop making waves Aug 2010 SocialChat: Giving Back to the Community Aug 2010 SocialChat on Learning in Meetings Aug 2010 iPAD's Natural User Interface Jul 2010 Last day for Sun Microsystems GmbH Jun 2010 SirValUse Celebration Snippets Jun 2010 10 years SirValUse - Happy Birthday! Jun 2010 Wim on Virtualization May 2010 New Home for Oracle VDI Apr 2010 Renaissance Slide Sorter Comments Apr 2010 Unboxing Sun Ray 3 Plus Apr 2010 Desktop Virtualisierung mit Sun VDI 3.1 Apr 2010 Blog Relaunch Mar 2010 Social Messaging Slides from CeBIT Mar 2010 Social Messaging Talk at CeBIT Feb 2010 Welcome Oracle Jan 2010 My last presentation at Sun Jan 2010 Ivan Sutherland on Leadership Jan 2010 Learning French with Sun VDI Jan 2010 Learning Danish with Sun Ray Jan 2010 VDI workshop in Nieuwegein Jan 2010 Happy New Year 2010 Jan 2010 On Creating Slides Dec 2009 Best VDI Ever Nov 2009 How to store the Big Bang Nov 2009 Social Enterprise Tools. Beipiel Sun. Nov 2009 Nov-19 Nov 2009 PDF and ODF links on your blog Nov 2009 Q&A on VDI and MySQL Cluster Nov 2009 Zürich next week: Swiss Intranet Summit 09 Nov 2009 Designing for a Sustainable World - World Usabiltiy Day, Nov-12 Nov 2009 How to export a desktop from VDI 3 Nov 2009 Virtualisation Roadshow in the UK Nov 2009 Project Wonderland at EDUCAUSE 09 Nov 2009 VDI Roadshow in Dublin, Nov-26, 2009 Nov 2009 Sun VDI at EDUCAUSE 09 Nov 2009 Sun VDI 3.1 Architecture and New Features Oct 2009 VDI 3.1 is Early-Access Sep 2009 Virtualization for MySQL on VMware Sep 2009 Silpion & 13. Stock Sommerparty Sep 2009 Sun Ray and VMware View 3.1.1 2009-08-31 New Set of Sun Ray Status Icons 2009-08-25 Virtualizing the VDI Core? 2009-08-23 World Usability Day Hamburg 2009 - CfP 2009-07-16 Rising Sun 2009-07-15 featuring twittermeme 2009-06-19 ISC09 Student Party on June-20 /Hamburg 2009-06-18 Before and behind the curtain of JavaOne 2009-06-09 20k desktops at JavaOne 2009-06-01 sweet microblogging 2009-05-25 VDI 3 - Why you need 3 VDI hosts and what you can do about that? 2009-05-21 IA Konferenz 2009 2009-05-20 Sun VDI 3 UX Story - Power of the Web 2009-05-06 Planet of Sun and Oracle User Experience Design 2009-04-22 Sun VDI 3 UX Story - User Research 2009-04-08 Sun VDI 3 UX Story - Concept Workshops 2009-04-06 Localized documentation for Sun Ray Connector for VMware View Manager 1.1 2009-04-03 Sun VDI 3 Press Release 2009-03-25 Sun VDI 3 launches today! 2009-03-25 Sun Ray Connector for VMware View Manager 1.1 Update 2009-03-11 desktop virtualization wiki relaunch 2009-03-06 VDI 3 at CeBIT hall 6, booth E36 2009-03-02 Keyboard layout problems with Sun Ray Connector for VMware VDM 2009-02-23 wikis.sun.com tips & tricks 2009-02-23 Sun VDI 3 is in Early Access 2009-02-09 VirtualCenter unable to decrypt passwords 2009-02-02 Sun & VMware Desktop Training 2009-01-30 VDI at next09? 2009-01-16 Sun VDI: How to use virtual machines with multiple network adapters 2009-01-07 Sun Ray and VMware View 2009-01-07 Hamburg World Usability Day 2008 - Webcasts 2009-01-06 Sun Ray Connector for VMware VDM slides 2008-12-15 mother of all demos 2008-12-08 Build your own Thumper 2008-12-03 Troubleshooting Sun Ray Connector for VMware VDM 2008-12-02 My Roller Tag Cloud 2008-11-28 Sun Ray Connector: SSL connection to VDM 2008-11-25 Setting up SSL and Sun Ray Connector for VMware VDM 2008-11-13 Inspiration for Today and Tomorrow 2008-10-23 Sun Ray Connector for VMware VDM released 2008-10-14 From Sketchpad to ILoveSketch 2008-10-09 Desktop Virtualization on Xing 2008-10-06 User Experience Forum on Xing 2008-10-06 Sun Ray Connector for VMware VDM certified 2008-09-17 Virtual Clouds over Las Vegas 2008-09-14 Bill Verplank sketches metaphors 2008-09-04 End of Early Access - Sun Ray Connector for VMware 2008-08-27 Early Access: Sun Ray Connector for VMware Virtual Desktop Manager 2008-08-12 Sun Virtual Desktop Connector - Insides on Recycling Part 2 2008-07-20 Sun Virtual Desktop Connector - Insides on Recycling Part 3 2008-07-20 Sun Virtual Desktop Connector - Insides on Recycling 2008-07-20 lost in wiki space 2008-07-07 Evolution of the Desktop 2008-06-17 Virtual Desktop Webcast 2008-06-16 Woodstock 2008-06-16 What's a Desktop PC anyway? 2008-06-09 Virtual-T-Box 2008-06-05 Virtualization Glossary 2008-05-06 Five User Experience Principles 2008-04-25 Virtualization News Feed 2008-04-21 Acetylcholinesterase - Second Season 2008-04-18 Acetylcholinesterase - End of Signal 2007-12-31 Produkt-Management ist... 2007-10-22 Usability Verbände, Verteiler und Netzwerke. 2007-10-02 The Meaning is the Message 2007-09-28 Visualization Methods 2007-09-10 Inhouse und Open Source Projekte – Usability verankern und Synergien nutzen 2007-09-03 Der Schwabe Darth Vader entdeckt das Virale Marketing 2007-08-29 Dick Hardt 3.0 on Identity 2.0 2007-08-27 quality of written text depends on the tool 2007-07-27 podcasts for reboot9 2007-06-04 It is the user's itch that need to be scratched 2007-05-25 A duel at reboot9 2007-05-14 Taxonomien und Folksonomien - Tagging als neues HCI-Element 2007-05-10 Dueling Interaction Models of Personal-Computing and Web-Computing 2007-03-01 22.März: Weizenbaum. Rebel at Work. /Filmpremiere Hamburg 2007-02-25 Bruce Sterling at UbiComp 2006 /webcast 2006-11-12 FSOSS 2006 /webcasts 2006-11-10 Highway 101 2006-11-09 User Experience Roundtable Hamburg: EuroGEL 2006 2006-11-08 Douglas Adams' Hyperland (BBC 1990) 2006-10-08 Taxonomien und Folksonomien – Tagging als neues HCI-Element 2006-09-13 Usability im Unternehmen 2006-09-13 Doug does HyperScope 2006-08-26 TED Talks and TechTalks 2006-08-21 Kai Krause über seine Freundschaft zu Douglas Adams 2006-07-20 Rebel At Work: Film Portrait on Weizenbaum 2006-07-04 Gabriele Fischer, mp3 2006-06-07 Dick Hardt at ETech 06 2006-06-05 Weinberger: From Control to Conversation 2006-04-16 Eye Tracking at User Experience Roundtable Hamburg 2006-04-14 dropping knowledge 2006-04-09 GEL 2005 2006-03-13 slide photos of reboot7 2006-03-04 Dick Hardt on Identity 2.0 2006-02-28 User Experience Newsletter #13: Versioning 2006-02-03 Ester Dyson on Choice and Happyness 2006-02-02 Requirements-Engineering im Spannungsfeld von Individual- und Produktsoftware 2006-01-15 User Experience Newsletter #12: Intuition Quiz 2005-11-30 User Experience und Requirements-Engineering für Software-Projekte 2005-10-31 Ivan Sutherland on "Research and Fun" 2005-10-18 Ars Electronica / Mensch und Computer 2005 2005-09-14 60 Jahre nach Memex: Über die Unvereinbarkeit von Desktop- und Web-Paradigma 2005-08-31 reboot 7 2005-06-30

    Read the article

  • Listing common SQL Code Smells.

    - by Phil Factor
    Once you’ve done a number of SQL Code-reviews, you’ll know those signs in the code that all might not be well. These ’Code Smells’ are coding styles that don’t directly cause a bug, but are indicators that all is not well with the code. . Kent Beck and Massimo Arnoldi seem to have coined the phrase in the "OnceAndOnlyOnce" page of www.C2.com, where Kent also said that code "wants to be simple". Bad Smells in Code was an essay by Kent Beck and Martin Fowler, published as Chapter 3 of the book ‘Refactoring: Improving the Design of Existing Code’ (ISBN 978-0201485677) Although there are generic code-smells, SQL has its own particular coding habits that will alert the programmer to the need to re-factor what has been written. See Exploring Smelly Code   and Code Deodorants for Code Smells by Nick Harrison for a grounding in Code Smells in C# I’ve always been tempted by the idea of automating a preliminary code-review for SQL. It would be so useful to trawl through code and pick up the various problems, much like the classic ‘Lint’ did for C, and how the Code Metrics plug-in for .NET Reflector by Jonathan 'Peli' de Halleux is used for finding Code Smells in .NET code. The problem is that few of the standard procedural code smells are relevant to SQL, and we need an agreed list of code smells. Merrilll Aldrich made a grand start last year in his blog Top 10 T-SQL Code Smells.However, I'd like to make a start by discovering if there is a general opinion amongst Database developers what the most important SQL Smells are. One can be a bit defensive about code smells. I will cheerfully write very long stored procedures, even though they are frowned on. I’ll use dynamic SQL occasionally. You can only use them as an aid for your own judgment and it is fine to ‘sign them off’ as being appropriate in particular circumstances. Also, whole classes of ‘code smells’ may be irrelevant for a particular database. The use of proprietary SQL, for example, is only a ‘code smell’ if there is a chance that the database will have to be ported to another RDBMS. The use of dynamic SQL is a risk only with certain security models. As the saying goes,  a CodeSmell is a hint of possible bad practice to a pragmatist, but a sure sign of bad practice to a purist. Plamen Ratchev’s wonderful article Ten Common SQL Programming Mistakes lists some of these ‘code smells’ along with out-and-out mistakes, but there are more. The use of nested transactions, for example, isn’t entirely incorrect, even though the database engine ignores all but the outermost: but it does flag up the possibility that the programmer thinks that nested transactions are supported. If anything requires some sort of general agreement, the definition of code smells is one. I’m therefore going to make this Blog ‘dynamic, in that, if anyone twitters a suggestion with a #SQLCodeSmells tag (or sends me a twitter) I’ll update the list here. If you add a comment to the blog with a suggestion of what should be added or removed, I’ll do my best to oblige. In other words, I’ll try to keep this blog up to date. The name against each 'smell' is the name of the person who Twittered me, commented about or who has written about the 'smell'. it does not imply that they were the first ever to think of the smell! Use of deprecated syntax such as *= (Dave Howard) Denormalisation that requires the shredding of the contents of columns. (Merrill Aldrich) Contrived interfaces Use of deprecated datatypes such as TEXT/NTEXT (Dave Howard) Datatype mis-matches in predicates that rely on implicit conversion.(Plamen Ratchev) Using Correlated subqueries instead of a join   (Dave_Levy/ Plamen Ratchev) The use of Hints in queries, especially NOLOCK (Dave Howard /Mike Reigler) Few or No comments. Use of functions in a WHERE clause. (Anil Das) Overuse of scalar UDFs (Dave Howard, Plamen Ratchev) Excessive ‘overloading’ of routines. The use of Exec xp_cmdShell (Merrill Aldrich) Excessive use of brackets. (Dave Levy) Lack of the use of a semicolon to terminate statements Use of non-SARGable functions on indexed columns in predicates (Plamen Ratchev) Duplicated code, or strikingly similar code. Misuse of SELECT * (Plamen Ratchev) Overuse of Cursors (Everyone. Special mention to Dave Levy & Adrian Hills) Overuse of CLR routines when not necessary (Sam Stange) Same column name in different tables with different datatypes. (Ian Stirk) Use of ‘broken’ functions such as ‘ISNUMERIC’ without additional checks. Excessive use of the WHILE loop (Merrill Aldrich) INSERT ... EXEC (Merrill Aldrich) The use of stored procedures where a view is sufficient (Merrill Aldrich) Not using two-part object names (Merrill Aldrich) Using INSERT INTO without specifying the columns and their order (Merrill Aldrich) Full outer joins even when they are not needed. (Plamen Ratchev) Huge stored procedures (hundreds/thousands of lines). Stored procedures that can produce different columns, or order of columns in their results, depending on the inputs. Code that is never used. Complex and nested conditionals WHILE (not done) loops without an error exit. Variable name same as the Datatype Vague identifiers. Storing complex data  or list in a character map, bitmap or XML field User procedures with sp_ prefix (Aaron Bertrand)Views that reference views that reference views that reference views (Aaron Bertrand) Inappropriate use of sql_variant (Neil Hambly) Errors with identity scope using SCOPE_IDENTITY @@IDENTITY or IDENT_CURRENT (Neil Hambly, Aaron Bertrand) Schemas that involve multiple dated copies of the same table instead of partitions (Matt Whitfield-Atlantis UK) Scalar UDFs that do data lookups (poor man's join) (Matt Whitfield-Atlantis UK) Code that allows SQL Injection (Mladen Prajdic) Tables without clustered indexes (Matt Whitfield-Atlantis UK) Use of "SELECT DISTINCT" to mask a join problem (Nick Harrison) Multiple stored procedures with nearly identical implementation. (Nick Harrison) Excessive column aliasing may point to a problem or it could be a mapping implementation. (Nick Harrison) Joining "too many" tables in a query. (Nick Harrison) Stored procedure returning more than one record set. (Nick Harrison) A NOT LIKE condition (Nick Harrison) excessive "OR" conditions. (Nick Harrison) User procedures with sp_ prefix (Aaron Bertrand) Views that reference views that reference views that reference views (Aaron Bertrand) sp_OACreate or anything related to it (Bill Fellows) Prefixing names with tbl_, vw_, fn_, and usp_ ('tibbling') (Jeremiah Peschka) Aliases that go a,b,c,d,e... (Dave Levy/Diane McNurlan) Overweight Queries (e.g. 4 inner joins, 8 left joins, 4 derived tables, 10 subqueries, 8 clustered GUIDs, 2 UDFs, 6 case statements = 1 query) (Robert L Davis) Order by 3,2 (Dave Levy) MultiStatement Table functions which are then filtered 'Sel * from Udf() where Udf.Col = Something' (Dave Ballantyne) running a SQL 2008 system in SQL 2000 compatibility mode(John Stafford)

    Read the article

  • bluetooth not working on Ubuntu 13.10

    - by iacopo
    I upgrated ubuntu from 13.4 to 13.10 and my bluetooth stopped working. When I open bluetooth I'm able to put it ON but the visibility doesn't show anything and didn't detect any device. when I: dmesg | grep Blue [ 2.046249] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.046252] usb 3-1: Manufacturer: Bluetooth v2.0 [ 15.255710] Bluetooth: Core ver 2.16 [ 15.255748] Bluetooth: HCI device and connection manager initialized [ 15.255759] Bluetooth: HCI socket layer initialized [ 15.255765] Bluetooth: L2CAP socket layer initialized [ 15.255776] Bluetooth: SCO socket layer initialized [ 20.110379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.110386] Bluetooth: BNEP filters: protocol multicast [ 20.110400] Bluetooth: BNEP socket layer initialized [ 20.120635] Bluetooth: RFCOMM TTY layer initialized [ 20.120656] Bluetooth: RFCOMM socket layer initialized [ 20.120660] Bluetooth: RFCOMM ver 1.11 when I digit: lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0bc2:2300 Seagate RSS LLC Expansion Portable Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 0e6a:6001 Megawin Technology Co., Ltd GEMBIRD Flexible keyboard KB-109F-B-DE Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 13ee:0001 MosArt Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub when I: hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1B:10:00:2A:EC ACL MTU: 1017:8 SCO MTU: 64:0 DOWN RX bytes:457 acl:0 sco:0 events:16 errors:0 TX bytes:68 acl:0 sco:0 commands:16 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT when I digit: rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no when I digit: sudo gedit /etc/bluetooth/main.conf [General] # List of plugins that should not be loaded on bluetoothd startup #DisablePlugins = network,input # Default adaper name # %h - substituted for hostname # %d - substituted for adapter id Name = %h-%d # Default device class. Only the major and minor device class bits are # considered. Class = 0x000100 # How long to stay in discoverable mode before going back to non-discoverable # The value is in seconds. Default is 180, i.e. 3 minutes. # 0 = disable timer, i.e. stay discoverable forever DiscoverableTimeout = 0 # How long to stay in pairable mode before going back to non-discoverable # The value is in seconds. Default is 0. # 0 = disable timer, i.e. stay pairable forever PairableTimeout = 0 # Use some other page timeout than the controller default one # which is 16384 (10 seconds). PageTimeout = 8192 # Automatic connection for bonded devices driven by platform/user events. # If a platform plugin uses this mechanism, automatic connections will be # enabled during the interval defined below. Initially, this feature # intends to be used to establish connections to ATT channels. AutoConnectTimeout = 60 # What value should be assumed for the adapter Powered property when # SetProperty(Powered, ...) hasn't been called yet. Defaults to true InitiallyPowered = true # Remember the previously stored Powered state when initializing adapters RememberPowered = false # Use vendor id source (assigner), vendor, product and version information for # DID profile support. The values are separated by ":" and assigner, VID, PID # and version. # Possible vendor id source values: bluetooth, usb (defaults to usb) #DeviceID = bluetooth:1234:5678:abcd # Do reverse service discovery for previously unknown devices that connect to # us. This option is really only needed for qualification since the BITE tester # doesn't like us doing reverse SDP for some test cases (though there could in # theory be other useful purposes for this too). Defaults to true. ReverseServiceDiscovery = true # Enable name resolving after inquiry. Set it to 'false' if you don't need # remote devices name and want shorter discovery cycle. Defaults to 'true'. NameResolving = true # Enable runtime persistency of debug link keys. Default is false which # makes debug link keys valid only for the duration of the connection # that they were created for. DebugKeys = false # Enable the GATT functionality. Default is false EnableGatt = false when I digit: dmesg | grep Bluetooth [ 2.013041] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.013049] usb 3-1: Manufacturer: Bluetooth v2.0 [ 13.798293] Bluetooth: Core ver 2.16 [ 13.798338] Bluetooth: HCI device and connection manager initialized [ 13.798352] Bluetooth: HCI socket layer initialized [ 13.798357] Bluetooth: L2CAP socket layer initialized [ 13.798368] Bluetooth: SCO socket layer initialized [ 20.184162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.184173] Bluetooth: BNEP filters: protocol multicast [ 20.184197] Bluetooth: BNEP socket layer initialized [ 20.238947] Bluetooth: RFCOMM TTY layer initialized [ 20.238983] Bluetooth: RFCOMM socket layer initialized [ 20.239018] Bluetooth: RFCOMM ver 1.11 When I digit: uname -a Linux casa-desktop 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux When I digit: lsmod Module Size Used by parport_pc 32701 0 rfcomm 69070 4 bnep 19564 2 ppdev 17671 0 ip6t_REJECT 12910 1 xt_hl 12521 6 ip6t_rt 13507 3 nf_conntrack_ipv6 18938 9 nf_defrag_ipv6 34616 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17718 8 xt_limit 12711 11 xt_tcpudp 12884 32 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 9 nf_defrag_ipv4 12729 1 nf_conntrack_ipv4 xt_conntrack 12760 18 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12741 0 nf_nat 26653 1 nf_nat_ftp kvm_amd 59958 0 nf_conntrack_ftp 18608 1 nf_nat_ftp kvm 431315 1 kvm_amd nf_conntrack 91736 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ip_tables 27239 1 iptable_filter snd_hda_codec_realtek 55704 1 ghash_clmulni_intel 13259 0 aesni_intel 55624 0 aes_x86_64 17131 1 aesni_intel snd_hda_codec_hdmi 41117 1 x_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT lrw 13257 1 aesni_intel snd_hda_intel 48171 5 gf128mul 14951 1 lrw glue_helper 13990 1 aesni_intel ablk_helper 13597 1 aesni_intel joydev 17377 0 cryptd 20329 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hda_codec 188738 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel arc4 12608 2 snd_hwdep 13602 1 snd_hda_codec rt2800pci 18690 0 snd_pcm 102033 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel radeon 1402449 3 rt2800lib 79963 1 rt2800pci btusb 28267 0 rt2x00pci 13287 1 rt2800pci rt2x00mmio 13603 1 rt2800pci snd_page_alloc 18710 2 snd_pcm,snd_hda_intel rt2x00lib 55238 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio snd_seq_midi 13324 0 mac80211 596969 3 rt2x00lib,rt2x00pci,rt2800lib snd_seq_midi_event 14899 1 snd_seq_midi ttm 83995 1 radeon snd_rawmidi 30095 1 snd_seq_midi cfg80211 479757 2 mac80211,rt2x00lib drm_kms_helper 52651 1 radeon snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi bluetooth 371880 12 bnep,btusb,rfcomm microcode 23518 0 eeprom_93cx6 13344 1 rt2800pci snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi crc_ccitt 12707 1 rt2800lib snd_timer 29433 2 snd_pcm,snd_seq snd 69141 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi psmouse 97626 0 drm 296739 5 ttm,drm_kms_helper,radeon k10temp 13126 0 soundcore 12680 1 snd serio_raw 13413 0 i2c_algo_bit 13413 1 radeon i2c_piix4 22106 0 video 19318 0 mac_hid 13205 0 lp 17759 0 parport 42299 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 53014 0 hid 105818 2 hid_generic,usbhid pata_acpi 13038 0 usb_storage 62062 1 r8169 67341 0 sdhci_pci 18985 0 sdhci 42630 1 sdhci_pci mii 13934 1 r8169 pata_atiixp 13242 0 ohci_pci 13561 0 ahci 25819 2 libahci 31898 1 ahci Someone can help me?

    Read the article

  • Best of Breed vs. Suite – Oracle’s SaaS Delivers Both

    - by yaldahhakim
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} The debate of which is better: “best of breed” business applications vs. an integrated suite is certainly not a new conversation. This has been argued between IT vendors and CIOs for years. It’s also important to clarify that “best of breed” does not necessarily translate into being the richest functionality; rather it’s often about just having the best fit solution to solve a specific business problem or need. So what does cloud have to do with the niche vs. suite debate? Consuming business applications in a cloud or SaaS deployment model can change the best of breed vs. suite discussion - if the cloud is done right. It’s having your cake and eating it too only better: you don’t have to gather all the ingredients or wait to bake your cake, and you can adjust how big of slice you take. Before you eat, it’s worth pausing to recall much of what we learned about IT over the last decade. These basic IT principles still hold true even though the financial model has changed from buying to renting. In other words, what’s under the technology hood still matters. Architecture and development methodologies like building an application based on open standards so it works with other systems - is still important. Data and information silos, complex integrations, and proprietary technologies that lock you in, are still bad. While some may argue that IT no longer matters with cloud, the opposite is actually true. If anything cloud can help return IT back to its rightful place as key strategic asset vs. a liability on the balance sheet. The “I” in CIO was never meant to stand for “integration” yet it’s amazing how much time and money is poured into these types of initiatives for most organizations each year. Rather the “I” needs to stand for “innovation”. This is where Oracle SaaS can uniquely help. Oracle’s application strategy has not really changed over the years. It’s always been about bringing the best and richest functionality across the enterprise to our customers while leveraging a common, standards-based, and enterprise-grade platform. So not jut best fit, but the best capabilities based on the input of thousands of enterprise customers across the globe. Oracle invests billions in R&D every year to add new capabilities to the broadest cloud portfolio in the industry, spanning across functional pillars like CRM, HCM, ERP, etc. And where it makes sense, Oracle combines key strategic acquisitions to complement organic functionality. The result is best of breed delivered in a suite. Again this is not something new. The game changer now with cloud is that it impacts HOW Oracle customers adopt the richest, most modern applications across the business – and continue on getting it. Consuming oracle applications in the cloud means you can adopt new capabilities and updates very quickly and easily. There’s no hardware to buy or software to manage. Oracle does it for you. Low upfront costs and an OpEx financial model is the easy part. Oracle Cloud Applications take it a big step further. For organizations that demand having the latest and richest functionality and accelerating the time to value from their IT investment, Oracle Cloud is the right path. It’s about holistically changing the “hows” and the “whys” of the organization by leveraging transformational innovations like social, mobile, and big data in a consistent and more powerful way. Not just about sales force automation or talent management. These technologies should impact all parts of the company and Oracle Cloud is the enterprise-grade delivery vehicle. Oracle SaaS helps break down barriers of adoption and is eases the headache of upgrades, investing in new supporting hardware, or adding internal expertise to manage it all. With Oracle Cloud, customers can get best of breed capabilities in either a full suite model or a la carte. And because it’s entirely built on open standards, it’s built to co-exist with existing IT investments. Updates can be automatic or delayed based on a customer’s requirements. And it’s complete – a full suite of cross pillar functionality. Even better, if you don’t like it, need more or less, just turn the dial up or down. Just like your utility bill, you pay for what you use, and can consume more or less power whenever you need it. Lower cost, lower investment risk, without compromising on functionality, security, or performance. Technology still matters in the cloud. So our cloud customers also like that when they adopt our cloud applications, they also get the best underlying technology, from the middleware and database platform down to infrastructure and Oracle’s engineered systems. Therefore it’s not just the greatest and latest in application functionality, but everything underneath that makes it work is also the latest and greatest. The best of breed technology stack powering best of breed business applications, and all delivered in a subscription based model. The best of both worlds. Yep, that’s the idea.

    Read the article

  • My Thoughts On the Xbox 180

    - by Chris Gardner
    Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2013/06/21/my-thoughts-on-the-xbox-180.aspx Everyone seems to be putting their 0.00237 cents into the wishing well over Microsoft's recent decision to reverse the DRM policy on the Xbox One. However, there have been a few issues that nobody has touched. As such, I have decided to dig 0.00237 cents out of my pocket. First, let me be clear about this point. I do not support the decision to reverse the DRM policy on the Xbox One. I wanted that point to be expressed first and unambiguously. I will say it again. I do not support the decision to reverse the DRM policy on the Xbox One. Now that I have that out of the way, let me go into my rationale. This decision removes most of the cool features that enticed me to pre-order the console. No, I didn't cancel my pre-order. There is still five months before the release of the console, and there is still a plethora of information that we, as consumers, do not have. With that, it should be noted that much of the talk in this post is speculation and rhetoric. I do not have any insider information that you do not possess. The persistent connection would have allowed the console to do many of the functions for which we have been begging. That demo where someone was playing Ryse, seamlessly accepted a multiplayer challenge in Killer Instinct, played the match (and a rematch,) and then jumped back into Ryse. That's gone, if you bought the game on disc. The new, DRM free system will require the disc in the system to play a game. That bullet point where one Xbox Live account could have up to 10 slave accounts so families could play together, no matter where they were located. That's gone as well. The promise of huge, expansive, dynamically changing worlds that was brought to us with the power of cloud computing. Well, "the people" didn't want there to be a forced, persistent connection. As such, developers can't rely on a connection and, as such, that feature is gone. This is akin to the removal of the hard drive on the Xbox 360. The list continues, but the enthusiast press has enumerated the list far better than I wish. All of this is because the Xbox team saw the HUGE success of Steam and decided to borrow a few ideas. Yes, Steam. The service that everyone hated for the first six months (for the same reasons the Xbox One is getting flack.) There was an initial growing pain. However, it is now lauded as the way games distribution should be handled. Unless you are Microsoft. I do find it curious that many of the features were originally announced for the PS4 during its unveiling. However, much of that was left strangely absent for Sony's E3 press conference. Instead, we received a single, static slide that basically said the exact opposite of Microsoft's plans. It is not farfetched to believe that slide came into existence during the approximately seven hours between the two media briefings. The thing that majorly annoys me over this whole kerfuffle is that the single thing that caused the call to arms is, really, not an issue. Microsoft never said they were going to block used sales. They said it was up to the publisher to make that decision. This would have allowed publishers to reclaim some of the costs of development in subsequent sales of the product. If you sell your game to GameStop for 7 USD, GameStop is going to sell it for 55 USD. That is 48 USD pure profit for them. Some publishers asked GameStop for a small cut. Was this a huge, money grubbing scheme? Well, yes, but the idea was that they have to handle server infrastructure for dormant accounts, etc. Of course, GameStop flatly refused, and the Online Pass was born. Fortunately, this trend didn’t last, and most publishers have stopped the practice. The ability to sell "licenses" has already begun to be challenged. Are you living in the EU? If so, companies must allow you to sell digital property. With this precedent in place, it's only a matter of time before other areas follow suit. If GameStop were smart, they should have immediately contacted every publisher out there to get the rights to become a clearing house for these licenses. Then, they keep their business model and could reduce their brick and mortar footprint. The digital landscape is changing. We need to not block this process. As Seth MacFarlane best said "Some issues are so important that you should drag people kicking and screaming." I believe this was said on an episode of Real Time with Bill Maher about the issue of Gay Marriages. Much like the original source, this is an issue that we need to drag people to the correct, progressive position. Microsoft, as a company, actually has the resources to weather the transition period. They have a great pool of first and second party developers that can leverage this new framework to prove the validity. Over time, the third party developers will get excited to use these tools. As an old C++ guy, I resisted C# for years. Now, I think it's one of the best languages I've ever used. I have a server room and a Co-Lo full of servers, so I originally didn't see the value in Azure. Now, I wish I could move every one of my projects into the cloud. I still LOVE getting physical packaging, which my music and games collection will proudly attest. However, I have started to see the value in pure digital, and have found ways to integrate this into the ways I consume those products. I can, honestly, understand how some parts of the population would be very apprehensive about this new landscape. There were valid arguments about people with no internet access. There are ways to combat these problems. These methods do not require us to throw the baby out with the bathwater. However, the number of people in the computer industry that I have seen cry foul is truly appalling. We are the forward looking people that help show how technology can improve people's lives. If we can't see the value of the brief pain involved with an exciting new ecosystem, than who will?

    Read the article

  • How to check if a Webcam is broken?

    - by user84812
    I just bought an Acer Aspire 3830TG, it comes with an integrated 1.3M HD Webcam. Before buying it i tried with a bootable Lubuntu usb stick, everything worked well except for the webcam, which i thought I had to tweak. The thing is that it seems the camera should work with no problems in ubuntu. The driver is detected, I try dmesg | grep uvcvideo and the output is [ 12.226174] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (058f:b002) [ 12.245553] usbcore: registered new interface driver uvcvideo I've also tried using different software (guvcview is black when camera output is MJPG and turns to funny colors when YU12 or YV12, cheese is always black, camorama is always with funny colors...). I should have checked that it was working properly with the default os (windows) but now it's too late for that. I even booted with a official Ubuntu Quantal distro from the usb pen, and the results are the same. so, my question is: is there any way to check that the camera is righmt or broken? So, if it's broken, at least i can go to the shop, show them that it's really broken and get an external webcam for free, or st like that. cheers. UPDATE 1 Thanks, jrp. I run sudo lsinput, and the output info about my video is the following: /dev/input/event6 bustype : BUS_USB vendor : 0x58f product : 0xb002 version : 2 name : "1.3M HD WebCam" phys : "usb-0000:00:1a.0-1.3/button" bits ev : EV_SYN EV_KEY /dev/input/event7 bustype : BUS_HOST vendor : 0x0 product : 0x6 version : 0 name : "Video Bus" phys : "LNXVIDEO/video/input0" bits ev : EV_SYN EV_KEY With this info, i'm not pretty sure about running the luvcview command. If I run luvcview -d /dev/video0 -L, the output is the following: SDL information: Video driver: x11 A window manager is available Device information: Device path: /dev/video0 { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/7, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/7, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/7, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/7, 1/5, { pixelformat = 'MJPG', description = 'MJPEG' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'RGB3', description = 'RGB3' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'BGR3', description = 'BGR3' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'YU12', description = 'YU12' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'YV12', description = 'YV12' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, if i run luvcview by itself, the image is funny (blue and red colors, mainly, with myself in negative state). tx

    Read the article

  • Thoughts on the Nomination Committee Campaign 2014

    - by Testas
    Congratulations to Erin, Andy and Allen on making the Nomination Committee for 2014. As Mark Broadbent (@retracement) stated in his tweet, there’s a great set of individuals for the Nom Com, and I could not agree more. I know Erin and Allen, and I know how much value they will bring to the process. I don’t know Andy as well, but I am sure he will do a great job and I hope I can meet him at PASS soon. The final candidate appointed by the PASS board is Rick Bolesta, who brings a wealth of experience to the process. I also want to take the opportunity to thank all who have voted. Not just for me, but for all the candidates during the election. Your contribution is greatly appreciated. Would I apply for the Nom Com again?  Yes I would. My first election experience has been a learning experience in itself. So I accept the result and look forward to applying next year. Moving on from this, I do want to express my opinion about the lack of international representation in the election process. One of the tweets that I saw after the result was from Adam Machanic (@AdamMachanic) who commented on the lack of international members on the Nom Com. If truth be told, I was disappointed – when the candidate list was released -- that for the second time in recent elections there was a lack of international candidates on the candidate list. It feels that only Brits and Americans partake in such elections. This is a real shame, and I can’t help thinking why this is the case. Hugo Kornelis (@Hugo_Kornelis) wrote a blog here to express his thoughts. He did raise some valid points. I don’t know why there is an absence of international candidates. I know that the team at PASS are looking to improve the situation, so I do not want to give the impression that PASS are doing nothing. For reference please see Bill Graziano’ s article here to see how PASS are addressing the situation. There is a clear direction to change the rules within PASS to give greater inclusion of international members. In addition to this, I wanted to explore a couple of potential approaches to address the situation. I am not saying that they are the right answer, but when I see challenges, I like to bring potential solutions to the table. 1.       Use the PASS mission statement to define a tactical objective that engages community leaders into the election process. If you are not familiar with the PASS mission statement, let me provide it here as laid out on the PASS website. “Empower data professionals who leverage Microsoft technologies to connect, share, and learn through networking, knowledge sharing, and peer-based learning” PASS fulfil this mission statement regularly. Whether you attend SQL Saturday, SQLRally, SQLPASS and BA conference itself. The biggest value of PASS is the ability to bring our profession together. And the 24 hour hop allows you to learn from the comfort of your own office/home. This mission should be extended to define a tactical objectives that bring greater networking and knowledge sharing between PASS Chapter leaders/Regional Mentors and PASS HQ. It should help educate the leaders about the opportunities of elections and how leaders can become involved. I know PASS engage with Chapter leaders on a regular basis to discuss community matters for the benefit of PASS members. How could this be achieved? Perhaps PASS could perform a quarterly virtual meeting that specifically looks at helping leaders become more involved with the election process 2.       Evolve the Global Growth Strategy into a Global Engagement Strategy. One of the remits of the PASS board over the last couple of years is the Global Growth strategy. This has been very successful as we have seen the massive growth of events across the world. For that, I congratulate the board for this success. Perhaps the time is now right to look at solidifying this success, through a Global Engagement Strategy that starts with the collaboration of Chapter Leaders, Regional Mentors and Evangelists in their respective Countries or Regions. The engagement strategy should look at increasing collaboration between community leaders for the benefit of their respective communities. It should also provide a channel for encouraging leaders to put themselves forward for the elections. How could this be achieved? In the UK, there has been a big growth in PASS Chapters and SQL Server Events that was approaching saturation point. The introduction of the Community Engagement Day -- channelled through the SQLBits conference -- has enabled Chapter Leaders to collaborate, connect and share with PASS, Sponsors and Microsoft. It also provides the ability for Chapter Leaders to speak directly to the PASS representatives from PASSHQ. This brings with it the ability for PASS community evangelists to communicate PASS objectives. It has also been the event where we have found out; and/or encouraged, Chapter Leaders to put themselves forward for elections. People like encouragement and validation when going for something like an election, and being able to discuss this with peers at a dedicated event provides a useful platform. PASS has the people in place already to facilitate such an event. Regional Mentors could potentially help organise such events on an annual basis, with PASSHQ providing support in providing a room/Lync access for the event to take place. It would be really good if a PASSHQ representative could attend in person as well.   3.       Restrict candidates to serve only a limited number of terms. A frequent comment I saw on social networking was that the elections can be seen by some as a popularity conference. Perhaps by limiting the number of terms that an individual can serve on either the Nom Com or the BOD, other candidates may be encouraged to be more actively involved within the PASS election process. I don’t think that the current byelaws deal with this particular suggestion. I also saw a couple of tweets that stated that more active community members did not apply for the Nom Com. I struggled to understand how the individuals of the tweets measured “more active”. It just also further solidified the subjective nature of elections. In the absence of how candidates are put forward for the elections. Then a restriction of terms enables the opportunity to be extended to others. How could this be achieved? Set a resolution that is put to a community vote as to the viability of such a solution. For example, the questions for the vote could be: Should individuals in the Nom Com and BoD be limited to a certain number of terms?  Yes/No. What is the maximum number of terms a candidate could serve?   It would be simple to execute such a vote, and the community will have an opportunity to have a say in an important aspect of the PASS organisation. And is the change is successful, then add it as a byelaw.   So there are some of my thoughts. I am not saying they are right or wrong. But I do hope that there is a concerted effort to encourage more candidates from other reaches of the Globe to become involved with future elections.   It would be good to hear your thoughts   Thanks   Chris

    Read the article

  • From J2EE to Java EE: what has changed?

    - by Bruno.Borges
    See original @Java_EE tweet on 29 May 2014 Yeap, it has been 8 years since the term J2EE was replaced, and still some people refer to it (mostly recruiters, luckily!). But then comes the question: what has changed besides the name? Our community friend Abhishek Gupta worked on this question and provided an excellent response titled "What's in a name? Java EE? J2EE?". But let me give you a few highlights here so you don't lose yourself with YATO (yet another tab opened): J2EE used to be an infrastructure and resources provider only, requiring developers to depend on external 3rd-party frameworks to then implement application requirements or improve productivity J2EE used to require hundreds of XML lines of codes to define just a dozen of resources like EJBs, MDBs, Servlets, and so on J2EE used to support only EAR (Enterprise Archives) with a bunch of other archives like JARs and WARs just to run a simple Web application And so on, and so on! It was a great technology but still required a lot of work to get something up and running. Remember xDoclet? Remember Struts? The old days of pure Hibernate code? Or when Ajax became a trending topic and we were all implementing it with DWR Servlet? Still, we J2EE developers survived, and learned, and helped evolve the platform to a whole new level of DX (Developer Experience). A new DX for J2EE suggested a new name. One that referred to the platform as the Enterprise Edition of Java, because "Java is why we're here" quoting Bill Shannon. The release of Java EE 5 included so many features that clearly showed developers the platform was going after all those DX gaps. Radical simplification of the persistence model with the introduction of JPA Support of Annotations following the launch of Java SE 5.0 Updated XML APIs with the introduction of StAX Drastic simplification of the EJB component model (with annotations!) Convention over Configuration and Dependency Injection A few bullets you may say but that represented a whole new DX and a vision for upcoming versions. Clearly, the release of Java EE 5 helped drive the future of the platform by reducing the number of XMLs, Java Interfaces, simplified configurations, provided convention-over-configuration, etc! We then saw the release of Java EE 6 with even more great features like Managed Beans, CDI, Bean Validation, improved JSP and Servlets APIs, JASPIC, the posisbility to deploy plain WARs and so many other improvements it is difficult to list in one sentence. And we've gotta give Spring Framework some credit here: thanks to Rod Johnson and team, concepts like Dependency Injection fit perfectly into the Java EE Platform. Clearly, Spring used to be one of the most inspiring frameworks for the Java EE platform, and it is great to see things like Pivotal and Spring supporting JSR 352 Batch API standard! Cooperation to keep improving DX at maximum in the server-side Java landscape.  The master piece result of these previous releases is seen and called today as Java EE 7, which by providing a newly and improved JavaServer Faces release, with new features for Web Development like WebSockets API, improved JAX-RS, and JSON-P, but also including Batch API and so many other great improvements, has increased developer productivity and brought innovation to server-side Java developers. Java EE is not just a new name (which was introduced back in May 2006!) but a new Developer Experience for server-side Java developers. To show you why we are here and where we are going (see the Java EE 8 update), we wanted to share with you a draft of the new Java EE logos that the evangelist team created, to help you spread the word about Java EE. You can get access to these images at the Java EE Platform Facebook Album, or the Google+ Java EE Platform Album whichever is better for you, but don't forget to like and/or +1 those social network profiles :-) A message to all job recruiters: stop using J2EE and start using Java EE if you want to find great Java EE 5, Java EE 6, or Java EE 7 developers To not only save you recruiter valuable characters when tweeting that job opportunity but to also match the correct term, we invite you to replace long terms like "Java/J2EE" or even worse "#Java #J2EE #JEE" or all these awkward combinations with the only acceptable hashtag: #JavaEE. And to prove that Java EE is catching among developers and even recruiters, and that J2EE is past, let me highlight here how are the jobs trends! The image below is from Indeed.com trends page, for the following keywords: J2EE, Java/J2EE, Java/JEE, JEE. As you can see, J2EE is indeed going away, while JEE saw some increase. Perhaps because some people are just lazy to type "Java" but at the same time they are aware that J2EE (the '2') is past. We shall forgive that for a while :-) Another proof that J2EE is going away is by looking at its trending statistics at Google. People have been showing less and less interest in the term J2EE. See the chart below:  Recruiter, if you still need proof that J2EE is past, that Java EE is trending, and that other job recruiters are seeking for Java EE developers, and that the developer community is aware of the new term, perhaps these other charts can show you what term you should be using. See for example the Job Trends for Java EE at Indeed.com and notice where it started... 2006! 8 years ago :-) Last but not least, the Google Trends for Java EE term (including the still wrong but forgivable JavaEE term) shows us that the new term is catching up very well. J2EE is past. Oh, and don't worry about the curves going down. We developers like to be hipsters sometimes and today only AngularJS, NodeJS, BigData are going up. Java EE and other traditional server-side technologies such as Spring, or even from other platforms such as Ruby on Rails, PHP, Grails, are pretty much consolidated and the curves... well, they are consolidated too. So If you are a Java EE developer, drop that J2EE from your résumé, and let recruiters also know that this term is past. Embrace Java EE, and enjoy a new developer experience for server-side Java developers. Java EE on TwitterJava EE on Google+Java EE on Facebook

    Read the article

  • The True Cost of a Solution

    - by D'Arcy Lussier
    I had a Twitter chat recently with someone suggesting Oracle and SQL Server were losing out to OSS (Open Source Software) in the enterprise due to their issues with scaling or being too generic (one size fits all). I challenged that a bit, as my experience with enterprise sized clients has been different – adverse to OSS but receptive to an established vendor. The response I got was: Found it easier to influence change by showing how X can’t solve our problems or X is extremely costly to scale. Money talks. I think this is definitely the right approach for anyone pitching an alternate or alien technology as part of a solution: identify the issue, identify the solution, then present pros and cons including a cost/benefit analysis. What can happen though is we get tunnel vision and don’t present a full view of the costs associated with a solution. An “Acura”te Example (I’m so clever…) This is my dream vehicle, a Crystal Black Pearl coloured Acura MDX with the SH-AWD package! We’re a family of 4 (5 if my daughters ever get their wish of adding a dog), and I’ve always wanted a luxury type of vehicle, so this is a perfect replacement in a few years when our Rav 4 has hit the 8 – 10 year mark. MSRP – $62,890 But as we all know, that’s not *really* the cost of the vehicle. There’s taxes and fees added on, there’s the extended warranty if I choose to purchase it, there’s the finance rate that needs to be factored in… MSRP –   $62,890 Taxes –      $7,546 Warranty - $2,500 SubTotal – $72,936 Finance Charge – $ 1094.04 Grand Total – $74,030 Well! Glad we did that exercise – we discovered an extra $11k added on to the MSRP! Well now we have our true price…or do we? Lifetime of the Vehicle I’m expecting to have this vehicle for 7 – 10 years. While the hard cost of the vehicle is known and dealt with, the costs to run and maintain the vehicle are on top of this. I did some research, and here’s what I’ve found: Fuel and Mileage Gas prices are high as it is for regular fuel, but getting into an MDX will require that I *only* purchase premium fuel, which comes at a premium price. I need to expect my bill at the pump to be higher. Comparing the MDX to my 2007 Rav4 also shows I’ll be gassing up more often. The Rav4 has a city MPG of 21, while the MDX plummets to 16! The MDX does have a bigger fuel tank though, so all in all the number of times I hit the pumps might even out. Still, I estimate I’ll be spending approximately $8000 – $10000 more on gas over a 10 year period than my current Rav4. Service Options Limited Although I have options with my Toyota here in Winnipeg (we have 4 Toyota dealerships), I do go to my original dealer for any service work. Still, I like the fact that I have options. However, there’s only one Acura dealership in all of Winnipeg! So if, for whatever reason, I’m not satisfied with the level of service I’m stuck. Non Warranty Service Work Also let’s not forget that there’s a bulk of work required every year that is *not* covered under warranty – oil changes, tire rotations, brake pads, etc. I expect I’ll need to get new tires at the 5 years mark as well, which can easily be $1200 – $1500 (I just paid $1000 for new tires for the Rav4 and we’re at the 5 year mark). Now these aren’t going to be *new* costs that I’m not used to from our existing vehicles, but they should still be factored in. I’d budget $500/year, or $5000 over the 10 years I’ll own the vehicle. Final Assessment So let’s re-assess the true cost of my dream MDX: MSRP                    $62,890 Taxes                       $7,546 Warranty                 $2,500 Finance Charge         $1094 Gas                        $10,000 Service Work            $5000 Grand Total           $89,030 So now I have a better idea of 10 year cost overall, and I’ve identified some concerns with local service availability. And there’s now much more to consider over the original $62,890 price tag. Tying This Back to Technology Solutions The process that we just went through is no different than what organizations do when considering implementing a new system, technology, or technology based solution, within their environments. It’s easy to tout the short term cost savings of particular product/platform/technology in a vacuum. But its when you consider the wider impact that the true cost comes into play. Let’s create a scenario: A company is not happy with its current data reporting suite. An employee suggests moving to an open source solution. The selling points are: - Because its open source its free - The organization would have access to the source code so they could alter it however they wished - It provided features not available with the current reporting suite At first this sounds great to the management and executive, but then they start asking some questions and uncover more information: - The OSS product is built on a technology not used anywhere within the organization - There are no vendors offering product support for the OSS product - The OSS product requires a specific server platform to operate on, one that’s not standard in the organization All of a sudden, the true cost of implementing this solution is starting to become clearer. The company might save money on licensing costs, but their training costs would increase significantly – developers would need to learn how to develop in the technology the OSS solution was built on, IT staff must learn how to set up and maintain a new server platform within their existing infrastructure, and if a problem was found there was no vendor to contact for support. The true cost of implementing a “free” OSS solution is actually spinning up a project to implement it within the organization – no small cost. And that’s just the short-term cost. Now the organization must ensure they maintain trained staff who can make changes to the OSS reporting solution and IT staff that will stay knowledgeable in the new server platform. If those skills are very niche, then higher labour costs could be incurred if those people are hard to find or if trained employees use that knowledge as leverage for higher pay. Maybe a vendor exists that will contract out support, but then there are those costs to consider as well. And let’s not forget end-user training – in our example, anyone that runs reports will need to be trained on how to use the new system. Here’s the Point We still tend to look at software in an “off the shelf” kind of way. It’s very easy to say “oh, this product is better than vendor x’s product – and its free because its OSS!” but the reality is that implementing any new technology within an organization has a cost regardless of the retail price of the product. Training, integration, support – these are real costs that impact an organization and span multiple departments. Whether you’re pitching an improved business process, a new system, or a new technology, you need to consider the bigger picture costs of implementation. What you define as success (in our example, having better reporting functionality) might not be what others define as success if implementing your solution causes them issues. A true enterprise solution needs to consider the entire enterprise.

    Read the article

  • Introducing… SharePress!

    - by Bil Simser
    For those that follow me I’ve been away from blogging and twittering for a couple of months. This is the reason. For the last few months I’ve been working with a cross-functional team putting together a new product from the people that run WordPress, the free premiere blogging platform. The result is a new product we call SharePress, a highly extensible blogging and content management platform with the usability of WordPress and the power of SharePoint combined into a single product. SharePress gives you SharePoint sites that are SEO-friendly delivered with a Web 2.0 ease of use, leveraging all of the existing abilities of SharePoint and WordPress that we know today. The Reason Back in December I was approached by the WordPress team about building a new platform that took advantage of the power of SharePoint but the ease of WordPress. I’m no stranger to WordPress and it’s 5 minute no-holds-barred install (I’ve always wanted SharePoint to do this!) and I run my personal blog on WordPress as does my better half, Princess Jenn. There’s always been a pitch by so-called Web 2.0 applications to deliver the power of SharePoint but the ease of [insert product here] over the past year or so. I checked each and every one of them out, but they fell woefully short when it came to SharePoint’s document management, versioning, and customization. They try, but it’s never been up to par in my books. On the flipside, SharePoint has always been tops in collaboration in the Enterprise but it’s painful to develop web parts, UI customization can be tricky, and there’s just no user community for something as simple as themes and designs. The Product Enter SharePress. Is it SharePoint? Is it WordPress? It’s both, and neither. Everything you like about both products are there but this is a bold new product that is positioned to bring SharePoint to the masses while maintaining the fidelity of an Enterprise 2.0 collaboration platform. SharePress delivers on all fronts including: The ability to leverage any WordPress/Joomla/Drupal/DotNetNuke themes and skins inside of SharePoint Run any WordPress/Drupal/Joomla/DotNetNuke/SharePoint plug-in/module/web part/feature works out of the box with SharePress SEO-friendly URLs and pages Permalinks for all content All the features of SharePoint Server 2010 (including InfoPath, Excel, and Access services) included in the price Small deployment footprint. You decide how much to deploy and where. Independent Database Abstraction Layer (iDal) that allows you to deploy to SQL Server 2005/2008, MySQL, and PostgreSQL Portable Rendering Engine Layer (PREL) so you host .NET or PHP on Apache or IIS (version 7 or higher). The install feature is built around WordPress and it’s famous 5-minute install (actually, it’s never taken me more than 1 minute). SharePress installs with two screens after the files are uploaded to your server (which can be done entirely using FTP): After you enter two fields of information click “Install SharePress” and you’ll be done: No mess, no fuss, no complicated dependencies, and no server access required! How simpler could this be? The Technology WordPress plug-ins and themes working with SharePoint? Of course! The answer is IronPython which has now reached a maturity level capable of doing on the fly code language conversions. SharePress is a brand new product not built on top of any previous platform but leverages all the power of each of those applications through a patent pending technique called SharePress Multi-plAtfoRm Technology (SMART). SMART will convert PHP code on the fly into Python (using SWIG as an intermediate processor) which is then compiled to MSIL and then delivered back as an ASP.NET MVC application (output is C# or VB.NET, but you can build your own SMART converter to output a different language). Sound complicated? It is, but it’s all behind the scenes and you don’t have to worry about a thing. This image illustrates the technology stack and process: So users can load up out of the box PHP themes and plug-ins from the WordPress/Joomla/Drupal community into the SMART converter and output MSIL that is used by the SharePress engine and rendered on the fly to the end user. Supported PHP versions are 4.xx and 5.xx with version 6 support to come when it’s released. Similarly you can take any .NET application, DotNetNuke Module, SharePoint Web Part or event handler and feed it into the converter to output the same. Everything is reverse compiled into MSIL so it becomes technology agnostic. No source code access is needed and the SMART converter can handle obfuscated .NET assemblies that were built with .NET 1.0, 1.1, 2.0, 3.5, and 4.0. With this technology you can also with the flip of a switch have the output create PHP pages for you. This allows you to run SharePress on Unix based systems running PHP and MySQL, allowing you to deliver your SharePoint like experience to your users with a $0 infrastructure footprint. Here’s SharePress with the default WordPress post imported then a stock SharePoint collaboration site was imported. The site was then applied with the default Kubrick theme from WordPress. The Features Deploy any of the freely available 100,000 WordPress/Joomla/Drupal themes instantly to your runtime SharePress environment and preview or activate them right from your browser. Built-in Web 2.0 jQuery Enabled End User and Administrator Web Interface. Never have to remote into a server again! Run any SharePoint Web Part or Event Handler directly without modification or access to source code in SharePress. Use any WordPress/Joomla/Drupal plug-in directly in SharePress, no local admin or access to server. Just upload and activate. Upload and Activate any SharePoint Solution Package to any site remotely. No rebuilding. Changes made to sites require no compiling or rebuilding and are published immediately. Password Protected Content. You can give passwords to individual posts, articles, pages, documents, forms, and list items. A powerful polymorphic Captcha system backs the security interface and vendors can easily tie into smart card readers, fingerprint readers, and retina scanners for authorization and identification. OpenID, Windows Live, and Windows Authentication are supported out of the box. Infinitely customizable and extensible. You can leverage plug-ins from the open source community to do practically anything, all configured and uploaded via the browser. Additionally the developer API (available soon) allows you to build extensions in .NET, PHP, and Python with little effort. Easy Importing. We have importers for Blogger, WordPress, Drupal, Joomla, DotNetNuke, and SharePoint so you can populate your site quickly and easily with full metadata modeling and creation. Banner Management. It’s easy to setup banners for your web site complete with impression numbers, special URLs, and more. Menu Manager. The Menu Manager allows you to create as many menus as you want, each one can be associated to specific audiences or roles and then be styled across multiple contexts including the same menu delivered as a fly out, rollover, drop down, and just about any navigation you can think of. Collaborative ShareBook. Our exclusive book feature allows you to setup a “book” and then authorize individuals to contribute content. Permalinks. All content in SharePress has a permanent or “perma link” associated with it so people can link to it freely without fear of broken links. Apache or IIS, Unix / Linux / BSD / Solaris / Windows / Mac OS X support. Deliver SharePress the way *you* want from the platform *you* decide. Database Independence. We know people wanted to run on any database platform so SharePress is built on top of a database abstraction layer that allows you to run on SQL Server, MySQL, PostgreSQL. Other databases can be supported by writing a supporting database script consisting of fourteen function calls. The script can be written in Perl, Python, AWK, PowerShell, Unix Shell scripts, VBA, or simple DOS batch files. The Team SharePress is the work of a lot of people in both the WordPress and SharePoint community. I worked with a lot of SharePoint MVPs to create this new product as we really wanted to deliver the most compatible and feature rich system in a product that we would be proud of. Many thanks go out to Eli Bleeker, Todd Robillard, Scot Larson, Daniel Hillier, Shane Fox, Box Peran, Amanda English, and Bill Murray for doing the heavy lifting and all of their expertise and innovative thinking to get this product out. Licensing and Pricing SharePress is still in the final stages for pricing but we’re looking at a price point somewhere between $99-$100 to make it affordable for everyone. We plan to announce final pricing sometime in the next few weeks. There are no additional charges for Enterprise versions or additional features. Everything you see is what’s available and it’s just a matter of lighting up your site with whatever feature you want to enable. The product will not be open source but source code licenses will be available to ISVs who are interested in interfacing with the API at a low level. Cost will be $25,000 USD per developer and gives you complete access to the source code to the SharePress Foundation System and the .NET 4.0 Framework source code. Conclusion We hope you enjoy the launch of SharePress as the new premium blogging and content management platform for both Intranets and the Internet. We think we’ve build the best of breed solutions here and made it easy for anyone to get started with a minimal of infrastructure but allow the scalability of SharePress to shine through in the Enterprise 2.0 world. We encourage your feedback so please leave comments as to what you’re looking for in this system as we’re always evolving it to make it a better product for everyone.

    Read the article

  • Building services with .Net Part 1

    - by Allan Rwakatungu
    On the 26th of May 2010 , I made a presentation to the .NET user group meeting (thanks to Malisa Ncube for organizing this event every month … ). If you missed my presentation , we talked about why we should all be building services … better still using the .NET framework. This blog post is an introduction to services , why you would want to build services and how you can build services using the .NET framework. What is a service? OASIS defines service as "a mechanism to enable access to one or more capabilities, where the access is provided using a prescribed interface and is exercised consistent with constraints and policies as specified by the service description." [1]. If the above definition sounds to academic , you can also define a service as loosely coupled units of functionality that have no calls to each other embedded in the. Instead of services embedding calls to each other in their service code they use defined protocols that describe how services pass and parse messages. This is a good way to think about services if you’re from an objected oriented background. While in object oriented programming functions make calls to each other, in service oriented programming, functions pass messages between each other. Why would you want to use services? 1. If your enterprise architecture looks like this   Services are the building blocks for SOA . With SOA you can move away from the sphaggetti infrastructure that is common in most enterprises. The complexity or lack of visibility of the integration points in your enterprises makes it difficult and costly to implement new initiatives and changes into the business - and even impossible in some cases - as it is not possible to identify the impact a change in one system might have to other systems. With services you can move to an architecture like this Your building blocks from Spaghetti infrastructure to something that is more well-defined and manageable to achieve cost efficiency and not least business agility - enabling you to react to changes in the market with speed and achieve operational efficiency and control are services. 2. If you want to become the Gates or Zuckerburger. Have you heard about Web 2.0 ? Mashups? Software as a service (SAAS) ? Cloud computing ?   They all offer you the opportunity to have scalable but low cost business models and they built using services.  Some of my favorite companies that leverage services for their business models include  https://www.salesforce.com/ (cloud CRM) http://www. twitter.com (more people use twitter clients built by 3rd parties than their official clients) http://www.kayak.com/ (compares data from other travel sites to give information to users in one location) Services with the .NET framework      If you are a .NET developer and you want to develop services, Windows Communication Framework (WCF) is the tool for you. WCF is Microsoft’s unified programming model (service model) for building service oriented applications. ( Before .NET 3.0 you had several models for programming services in .NET including .NET remoting, Web services (ASMX), COM +, Microsoft Messaging queuing (MSMQ) etc, after .NET 3.0 the programming model was unified into one i.e. WCF ). Windows Communication Framework (WCF) provides you 1. An Software Development Kit (SDK) for creating SOA applications 2. A runtime for running services on the Windows platform Why should you use Windows Communication Foundation if you’re programming services?   1. It supports interoperable and open standards e.g. WS* protocols for programming SOAP services 2. It has a unified programming model. Whether you use TCP or Http or Pipes or transmitting using Messaging Queues, programmers need to learn just one way to program. Previously you had .NET remoting, MSMQ, Web services, COM+ and they were all done differently 3. Productive programming model You don’t have to worry about all the plumbing involved to write services. You have a rich declarative programming model to add stuff like logging, transactions, and reliable messages in-built in the Windows Communication Framework. Understanding services in WCF The basic principles of WCF are as easy as ABC A – Address This is where the service is located B- Binding This describes how you communicate with the service e.g. Use TCP, HTTP or both. How to exchange security information with the service etc. C – Contract This defines what the service can do. E.g. Pay water bill, Make a phone call A - Addresses In WCF, an address is a combination of transport, server name, port and path Example addresses may include http://localhost:8001 net.tcp://localhost:8002/MyService net.pipe://localhost/MyPipe net.msmq://localhost/private/MyService net.msmq://localhost/MyService B- Binding   There are numerous ways to communicate with services , different ways that a message can be formatted/sent/secured, that allows you to tailor your service for the compatibility/performance you require for your solution. Transport You can use HTTP TCP MSMQ , Named pipes, Your own custom transport etc Message You  can send a plain text binary, Message Transmission Optimization Mechanism (MTOM) message Communication security No security Transport security Message security Authenticating and authorizing callers etc Behaviour You service can support Transactions Be reliable Use queues Support ajax etc C - Contract You define what your service can do using Service contracts :- Define operations that your service can do, communications and behaviours Data contracts :- Define the messages that are passed from and into your service and how they are formatted Fault contracts :- Defines errors types in your service   As an example, suppose your service service shows money. You define your service contract using a interface [ServiceContract] public interface IShowMeTheMoney {   [OperationContract]    Money Show(); } You define the data contract by annotating a class it with the Data Contract attribute and fields you want to pass in the message as Data Members. (Note:- In the latest versions of WCF you dont have to use attributes if you passing all the objects properties in the message) [DataContract] public Money {   [DataMember]   public string Currency { get; set; }   [DataMember]   public Decimal Amount { get; set; }   public string Comment { get; set; } } Features of Windows Communication Foundation Windows Communication Foundation is not only simple but feature rich , offering you several options to tweak your service to fit your business requirements. Some of the features of WCF include 1. Workflow services You can combine WCF with Windows WorkFlow Foundation (WWF) to write workflow type services 2. Control how your data (messages) are transferred and serialized e.g. you can serialize your business objects as XML or binary 3. control over session management , instance creation and concurrency management without writing code if you like 4. Queues and reliable sessions. You can store messages from the sending client and later forward them to the receiving application. You can also guarantee that messages will arrive at their destincation. 5.Transactions:  You can have different services participate in a transaction operations that can be rolled back if needed 6. Security. WCF has rich features for authorization and authentication  as well as keep audit trails 7. Web programming model. WCF allows developers to expose services as non SOAP endpoints 8. Inbuilt features that you can use to write JSON and services that support AJAX applications And lots more In my next blog I will show you how you can use WCF features to write a real world business service.               Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ]] /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Wireless will not connect

    - by azz0r
    Hello, I have installed Ubuntu 10.10 on the same machine as my windows setup. However, it will not connect to my wireless network. It can see its there, it can attempt to connect, yet it will never connect. It will keep bringing up the password prompt everyso often. I have tried turning my security to WEP, I ended up turning it back to WPA2. It is set to AES (noted a few threads on google about that). Can you assist? I would love to dive into Ubuntu, but without the internet its pointless. --- lshw -C network --- *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 02 serial: 00:1d:92:ea:cc:62 capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.020.00-NAPI duplex=half latency=0 link=no multicast=yes port=twisted pair resources: irq:29 ioport:e800(size=256) memory:feaff000-feafffff memory:f8ff0000-f8ffffff(prefetchable) memory:feac0000-feadffff(prefetchable) *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: 00:15:af:72:a4:38 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bgn --- iwconfig ---- lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Wuggawoo" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Tx-Power=9 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on --- cat /etc/network/interfaces ---- auto lo iface lo inet loopback logs deamon.log --- Jan 19 04:17:09 ubuntu wpa_supplicant[1289]: Authentication with 94:44:52:0d:22:0d timed out. Jan 19 04:17:09 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 04:17:09 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning Jan 19 04:17:11 ubuntu wpa_supplicant[1289]: WPS-AP-AVAILABLE Jan 19 04:17:11 ubuntu wpa_supplicant[1289]: Trying to associate with 94:44:52:0d:22:0d (SSID='Wuggawoo' freq=2437 MHz) Jan 19 04:17:11 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0/wireless): association took too long. Jan 19 04:17:12 ubuntu NetworkManager: <info> (wlan0): device state change: 5 -> 6 (reason 0) Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0/wireless): asking for new secrets Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Jan 19 04:17:12 ubuntu NetworkManager: <info> (wlan0): device state change: 6 -> 4 (reason 0) Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Jan 19 04:17:12 ubuntu NetworkManager: <info> (wlan0): device state change: 4 -> 5 (reason 0) Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0/wireless): connection 'Wuggawoo' has security, and secrets exist. No new secrets needed. Jan 19 04:17:12 ubuntu NetworkManager: <info> Config: added 'ssid' value 'Wuggawoo' Jan 19 04:17:12 ubuntu NetworkManager: <info> Config: added 'scan_ssid' value '1' Jan 19 04:17:12 ubuntu NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK' Jan 19 04:17:12 ubuntu NetworkManager: <info> Config: added 'psk' value '<omitted>' Jan 19 04:17:12 ubuntu NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed Jan 19 04:17:12 ubuntu NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Jan 19 04:17:12 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 04:17:12 ubuntu NetworkManager: <info> Config: set interface ap_scan to 1 Jan 19 04:17:12 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning Jan 19 04:17:13 ubuntu wpa_supplicant[1289]: WPS-AP-AVAILABLE Jan 19 04:17:13 ubuntu wpa_supplicant[1289]: Trying to associate with 94:44:52:0d:22:0d (SSID='Wuggawoo' freq=2437 MHz) Jan 19 04:17:13 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating Jan 19 04:17:23 ubuntu wpa_supplicant[1289]: Authentication with 94:44:52:0d:22:0d timed out. Jan 19 04:17:23 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 04:17:23 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning Jan 19 04:17:24 ubuntu AptDaemon: INFO: Initializing daemon Jan 19 04:17:25 ubuntu wpa_supplicant[1289]: WPS-AP-AVAILABLE Jan 19 04:17:25 ubuntu wpa_supplicant[1289]: Trying to associate with 94:44:52:0d:22:0d (SSID='Wuggawoo' freq=2437 MHz) Jan 19 04:17:25 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating Jan 19 04:17:27 ubuntu NetworkManager: <info> wlan0: link timed out. --- kern.log --- Jan 19 04:18:11 ubuntu kernel: [ 142.420024] wlan0: direct probe to AP 94:44:52:0d:22:0d timed out Jan 19 04:18:13 ubuntu kernel: [ 144.333847] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 1) Jan 19 04:18:13 ubuntu kernel: [ 144.539996] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 2) Jan 19 04:18:13 ubuntu kernel: [ 144.750027] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 3) Jan 19 04:18:14 ubuntu kernel: [ 144.940022] wlan0: direct probe to AP 94:44:52:0d:22:0d timed out Jan 19 04:18:25 ubuntu kernel: [ 155.832995] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 1) Jan 19 04:18:25 ubuntu kernel: [ 156.030046] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 2) Jan 19 04:18:25 ubuntu kernel: [ 156.230039] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 3) Jan 19 04:18:25 ubuntu kernel: [ 156.430039] wlan0: direct probe to AP 94:44:52:0d:22:0d timed out --- syslog --- Jan 19 04:18:46 ubuntu wpa_supplicant[1289]: Authentication with 94:44:52:0d:22:0d timed out. Jan 19 04:18:46 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 04:18:46 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning Jan 19 04:18:48 ubuntu wpa_supplicant[1289]: WPS-AP-AVAILABLE Jan 19 04:18:48 ubuntu wpa_supplicant[1289]: Trying to associate with 94:44:52:0d:22:0d (SSID='Wuggawoo' freq=2437 MHz) Jan 19 04:18:48 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating Jan 19 04:18:48 ubuntu kernel: [ 178.833905] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 1) Jan 19 04:18:48 ubuntu kernel: [ 179.030035] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 2) Jan 19 04:18:48 ubuntu kernel: [ 179.230020] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 3) Jan 19 04:18:48 ubuntu kernel: [ 179.433634] wlan0: direct probe to AP 94:44:52:0d:22:0d timed out lspci and lsusb lspci -- 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a) 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 01:00.0 VGA compatible controller: nVidia Corporation G80 [GeForce 8800 GTS] (rev a2) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 03:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller -- lsusb -- Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Bus 004 Device 002: ID 045e:0730 Microsoft Corp. Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 13d3:3247 IMC Networks 802.11 n/g/b Wireless LAN Adapter Bus 002 Device 002: ID 0718:0628 Imation Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 046d:08c2 Logitech, Inc. QuickCam PTZ Bus 001 Device 002: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub With no security on my router I still can't connect, I get: Jan 19 15:58:01 ubuntu wpa_supplicant[1165]: Authentication with 94:44:52:0d:22:0d timed out. Jan 19 15:58:01 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 15:58:01 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning Jan 19 15:58:02 ubuntu wpa_supplicant[1165]: WPS-AP-AVAILABLE Jan 19 15:58:02 ubuntu wpa_supplicant[1165]: Trying to associate with 94:44:52:0d:22:0d (SSID='Wuggawoo' freq=2437 MHz) Jan 19 15:58:02 ubuntu wpa_supplicant[1165]: Association request to the driver failed Jan 19 15:58:02 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating Jan 19 15:58:05 ubuntu NetworkManager: <info> wlan0: link timed out. Jan 19 15:58:07 ubuntu wpa_supplicant[1165]: Authentication with 94:44:52:0d:22:0d timed out. Jan 19 15:58:07 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 15:58:07 ubuntu NetworkManager: <info> (wlan0): supplicant connec

    Read the article

  • Windows Azure Evolution &ndash; Preview Developer Portal

    - by Shaun
    With the MEET Windows Azure event on 7th June, there are many new features and updates in windows azure platform. In the coming several posts I will try to cover some of them. And in the first post here I would like to just have a quick walkthrough of the new preview developer portal.   History of the Developer Portal If you have been working with windows azure since 2009 or 2010, you should remember the first version of the developer portal. It was built in HTML with very limited features. I have the impression when I was using is old one. The layout is not that attractive and you have very limited features. On November, 2010 alone with the SDK 1.3 release, the developer portal was getting a big jump. In order to give more usability and features this it turned to be built on Silverlight. Hence it runs like a desktop application with many windows, lists, commands and context menus. From 2010 till now many features were involved into this portal, such as the remote desktop, co-admin, virtual connect, VM role, etc.. And the portal itself became more and more complicated. But it brought some problems by using the Silverlight. The first one is the browser capability. As you know in most mobile and tablet device the browser doesn’t allow the rich content plugin, such as Flash and Silverlight. This means people cannot open and configure their azure services from their iPad, iPhone and Windows Phone, etc., even though what they need may just be restart a hosted service, or view the status of their databases. Another problem is the performance. Silverlight provides rich experience to the users, but also needs more bandwidth. So in this upgrade the preview developer portal will be back to use HTML, with JavaScript, as a mobile friendly, cross browser, interactively web site.   Preview Portal vs. Silverlight Portal Before I started to talk about the new preview portal I’d better highlight that, this preview portal is a PREVIEW version, which means even though you can do almost all features that already in the old one, as long as some cool new features I will mention in the coming several posts, there are something still under developed and migrated. So sometimes you need to switch back to the old one. For example, in preview portal there is no co-admin manage function, no remote desktop function and the SQL database manage function will take you back to the old SQL Azure Manage Portal. But as Microsoft said these missing features will be moved in the preview portal in the couple of next few months. Since the public URL of the developer portal, https://windows.azure.com/, had been changed to point to this preview one, you need to click to preview button on top of the page and click the “Take me to the previous portal” link.   Overview There are four parts in the preview portal. On the top is the header which shows the account you are currently logging in. If you click on the header it will show the top menu of windows azure, where you can navigate to the windows azure home page, the price information page, community and account, etc.. The navigation bar is on the left hand side, with the categories listed below. ALL ITEMS All items in your windows azure account, includes the web sites, services, databases, etc.. WEB SITES The web sites in your windows azure account. It will only show the web sites you have. The linked resources will be shown if you drill down into a web site. VIRTUAL MACHINES The virtual machines that you had been deployed to azure. CLOUD SERVICES All windows azure hosted services in your account. SQL DATABASES All SQL databases (SQL Azure) in your account. STORAGE All windows azure storage services in your account. NETWORKS The virtual network (Windows Azure Connect) you had been created. The available items will be listed in the main part of the page based on which category your currently selected. If there’s no item it will show the link to you to quick create. At the bottom of the page there will be the command and information bar. Based on what is selected and what is performed by the user, it will show the related information and commands. For example, in the image below when I was creating a new web site, the information bar told me that my web site is being provisioned; and there are two commands in the command bar. And once it ready the command bar will show some commands that I can do to my new web site. The “Web Sites” is a new feature introduced alone with this upgrade. It gives us an easier and quicker way to establish a website from the scratch or from some existing library. I will introduce it more details in the coming next post. Also in the command bar you can create a service by clicking the NEW button. It will slide the creation panel up to you.   Where’s My Hosted Services The Windows Azure Hosted Services had been renamed to the Cloud Services. Create a new service would be very easy. Just click the NEW button at the bottom of the page, and select the CLOUD SERVICE and QIUICK CREATE. This will create a blank hosted service without deployment and certificate. It just needs you to specify the service URL and the affinity/region. Then the service will be shown in the list. If you clicked the item all information will be shown in the main part. Since there’s no package deployed to this service so currently we cannot see any information about it. But we can upload the package by using the command at the bottom. And as you can see, we could manage the configuration, instances, certificates and we can scale up and down (change the VM size), in and out (increase and decrease the instance count) to our service. Assuming I had created an ASP.NET MVC 3 web role project in Visual Studio and completed the package. Then I can click the UPLOAD button in this page to deploy my package. In the popping up window I just specify my deployment name, package file and configure file. Also I can check the box below so that it will NOT warn me if only one instance of this deployment. Once we clicked the OK button our package will be uploaded and provisioned by the platform. After a while we can see the service was ready from the information bar. We can have the basic information about this service and deployment if we to the dashboard page. For example the usage overview diagram, status, URL, public IP address, etc.. In the configure page we can view and change the CSCFG content such as the monitor setting, connection strings, OS family. In scale page we can increase and decrease the count of the instances. And in the instances page we can view all instances status. And, if your services is using some SQL databases and storages they will be shown as the linked resources under the linked resources page. And you can manage the certificates of this service as well under the certificates page.   How About My Storage Services The storage service can be managed by clicking into the STORAGES link in the navigation bar. And we can create a new storage service from the NEW button. After specify the storage name and region it will be previsioned by the platform. If you want to copy or manage the storage key you can just click the Manage Keys button at the bottom, which is very easy. What I want to highlight here is that, you can monitor your storage service by enabling the monitor configuration. Click the storage item in the list and navigate to the configure page. As you can see in the page you can enable the monitoring for blob, table and queue. And you can also enable the logging when any requests come to the storage. But as the tooltip shown in the page, enabling the monitoring and logging will increase the usage of the storage, which means increase the bill of them. So make sure you enable them properly.   And My SQL Databases (SQL Azure) The last thing I want to quick introduce is the SQL databases, which was formally named SQL Azure. You can create a new SQL Database Server and a new database by clicking the ADD button under the SQL Database navigation item. In the popping up windows just specify the database name, the edition, size, collation and the server. You can select an existing SQL Database Server if you have, or cerate a new one. If you selected to create a new server, there will be another step you need to do, which is specify the server login, password and the region. Once it ready you can mange your databases as well as the servers in the portal. In a particular server you can update the firewall settings in its Configure page. So, What Else There are some other area on the preview portal I didn’t cover, such as the virtual machines, virtual network and web sites. Regarding the virtual machines and web sites I will talk about them in the future separated post. Regarding the virtual network, it the Windows Azure Connect we are familiar with. But as I mention in the beginning of this post, the preview portal is still under developed. Some features are not available here. For example, you cannot manage the co-admin of your subscriptions, you cannot open the remote desktop on your hosted services, and you cannot navigate to the Windows Azure Service Bus, Access Control and Caching, which formally named Windows Azure AppFabric directly. In these cases you need to navigate back to the old portal. So in the coming several months we might need to use both these two sites.   Summary In this post I quick introduced the new windows azure developer portal. Since it had been rearranged and renamed I demonstrated some features that existing in the old portal, such as how to create and deploy a hosted service, how to provision a storage service and SQL database. All features in the old portal had been, is being and will be migrated into this new portal, but some of them were in a different category and page we need to figure out.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • wifi not recognized

    - by pumper
    I had wifi and worked then some day ubuntu asked me to update some packeages and restarted the system and after that no wifi. this is my wireless_script output : ########## wireless info START ########## ##### release ##### Distributor ID: Ubuntu Description: Ubuntu 14.04 LTS Release: 14.04 Codename: trusty ##### kernel ##### Linux S510p 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux ##### lspci ##### 02:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01) Subsystem: Lenovo Device [17aa:3026] Kernel driver in use: ath9k 03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8162 Fast Ethernet [1969:1090] (rev 10) Subsystem: Lenovo Device [17aa:3807] Kernel driver in use: alx ##### lsusb ##### Bus 001 Device 006: ID 0eef:a111 D-WAV Scientific Co., Ltd Bus 001 Device 007: ID 0cf3:3004 Atheros Communications, Inc. Bus 001 Device 004: ID 174f:1488 Syntek Bus 001 Device 003: ID 03f0:5607 Hewlett-Packard Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 002: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ##### PCMCIA Card Info ##### ##### rfkill ##### 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no ##### iw reg get ##### country 00: (2402 - 2472 @ 40), (3, 20) (2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS (2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS ##### interfaces ##### # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback auto dsl-provider iface dsl-provider inet ppp pre-up /sbin/ifconfig wlan0 up # line maintained by pppoeconf provider dsl-provider auto wlan0 iface wlan0 inet manual ##### iwconfig ##### wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off ##### route ##### Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface ##### resolv.conf ##### ##### nm-tool ##### NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: alx State: unavailable Default: no HW Address: <MAC address removed> Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: unmanaged Default: no HW Address: <MAC address removed> Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points ##### NetworkManager.state ##### [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true ##### NetworkManager.conf ##### [main] plugins=ifupdown,keyfile,ofono dns=dnsmasq no-auto-default=<MAC address removed>, [ifupdown] managed=false ##### iwlist ##### wlan0 Scan completed : Cell 01 - Address: <MAC address removed> Channel:1 Frequency:2.412 GHz (Channel 1) Quality=55/70 Signal level=-55 dBm Encryption key:on ESSID:"mohsen" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000076c342498 Extra: Last beacon: 12ms ago IE: Unknown: 00066D6F6873656E IE: Unknown: 010882848B960C121824 IE: Unknown: 030101 IE: Unknown: 2A0104 IE: Unknown: 32043048606C ##### iwlist channel ##### wlan0 13 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz ##### lsmod ##### ath3k 13318 0 bluetooth 395423 23 bnep,ath3k,btusb,rfcomm ath9k 164164 0 ath9k_common 13551 1 ath9k ath9k_hw 453856 2 ath9k_common,ath9k ath 28698 3 ath9k_common,ath9k,ath9k_hw mac80211 626489 1 ath9k cfg80211 484040 3 ath,ath9k,mac80211 ##### modinfo ##### filename: /lib/modules/3.13.0-24-generic/kernel/drivers/bluetooth/ath3k.ko firmware: ath3k-1.fw license: GPL version: 1.0 description: Atheros AR30xx firmware driver author: Atheros Communications srcversion: 98A5245588C09E5E41690D0 alias: usb:v0489pE036d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE03Cd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE02Cd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE003d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3121d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3402d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04C5p1330d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE04Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE056d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE04Ed*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3393d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE057d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0220d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0219d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE005d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3362d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3008d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3006d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3005d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3375d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p817Ad*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p311Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3008d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p0036d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v03F0p311Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE027d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE03Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0215d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3304d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE019d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3002d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3000d*dc*dsc*dp*ic*isc*ip*in* depends: bluetooth intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko license: Dual BSD/GPL description: Support for Atheros 802.11n wireless LAN cards. author: Atheros Communications srcversion: BAF225EEB618908380B28DA alias: platform:qca955x_wmac alias: platform:ar934x_wmac alias: platform:ar933x_wmac alias: platform:ath9k alias: pci:v0000168Cd00000036sv*sd*bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd00003027bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002810bc*sc*i* alias: pci:v0000168Cd00000036sv0000144Fsd00007202bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd00002130bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000612bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000652bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000642bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd0000302Cbc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003027bc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Ebc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Dbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Cbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Bbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Abc*sc*i* alias: pci:v0000168Cd00000036sv00001028sd0000020Ebc*sc*i* alias: pci:v0000168Cd00000036sv0000103Csd0000217Fbc*sc*i* alias: pci:v0000168Cd00000036sv0000103Csd000018E3bc*sc*i* alias: pci:v0000168Cd00000036sv000017AAsd00003026bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd0000213Abc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000662bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000672bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000622bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd00003028bc*sc*i* alias: pci:v0000168Cd00000036sv0000105Bsd0000E069bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd0000302Bbc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003026bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003025bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002812bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002811bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00006671bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000632bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd0000A119bc*sc*i* alias: pci:v0000168Cd00000036sv0000105Bsd0000E068bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd00002176bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003028bc*sc*i* alias: pci:v0000168Cd00000037sv*sd*bc*sc*i* alias: pci:v0000168Cd00000034sv*sd*bc*sc*i* alias: pci:v0000168Cd00000034sv000010CFsd00001783bc*sc*i* alias: pci:v0000168Cd00000034sv000014CDsd00000064bc*sc*i* alias: pci:v0000168Cd00000034sv000014CDsd00000063bc*sc*i* alias: pci:v0000168Cd00000034sv0000103Csd00001864bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006641bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006631bc*sc*i* alias: pci:v0000168Cd00000034sv00001043sd0000850Ebc*sc*i* alias: pci:v0000168Cd00000034sv00001A3Bsd00002110bc*sc*i* alias: pci:v0000168Cd00000034sv00001969sd00000091bc*sc*i* alias: pci:v0000168Cd00000034sv000017AAsd00003214bc*sc*i* alias: pci:v0000168Cd00000034sv0000168Csd00003117bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006661bc*sc*i* alias: pci:v0000168Cd00000034sv00001A3Bsd00002116bc*sc*i* alias: pci:v0000168Cd00000033sv*sd*bc*sc*i* alias: pci:v0000168Cd00000032sv*sd*bc*sc*i* alias: pci:v0000168Cd00000032sv00001043sd0000850Dbc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00001C01bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00001C00bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001F95bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001195bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001F86bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001186bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00002001bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00002000bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Fsd00007197bc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E04Fbc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E04Ebc*sc*i* alias: pci:v0000168Cd00000032sv000011ADsd00006628bc*sc*i* alias: pci:v0000168Cd00000032sv000011ADsd00006627bc*sc*i* alias: pci:v0000168Cd00000032sv00001C56sd00004001bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002100bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002C97bc*sc*i* alias: pci:v0000168Cd00000032sv000017AAsd00003219bc*sc*i* alias: pci:v0000168Cd00000032sv000017AAsd00003218bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C708bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C680bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C706bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Fbc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Ebc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Dbc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd00004106bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd00004105bc*sc*i* alias: pci:v0000168Cd00000032sv0000185Fsd00003027bc*sc*i* alias: pci:v0000168Cd00000032sv0000185Fsd00003119bc*sc*i* alias: pci:v0000168Cd00000032sv0000168Csd00003122bc*sc*i* alias: pci:v0000168Cd00000032sv0000168Csd00003119bc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E075bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002152bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd0000126Abc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002126bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001237bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002086bc*sc*i* alias: pci:v0000168Cd00000030sv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Esv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Dsv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Csv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Bsv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Bsv00001A3Bsd00002C37bc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd00001536bc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd0000147Dbc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd0000147Cbc*sc*i* alias: pci:v0000168Cd0000002Asv0000185Fsd0000309Dbc*sc*i* alias: pci:v0000168Cd0000002Asv00001A32sd00000306bc*sc*i* alias: pci:v0000168Cd0000002Asv000011ADsd00006642bc*sc*i* alias: pci:v0000168Cd0000002Asv000011ADsd00006632bc*sc*i* alias: pci:v0000168Cd0000002Asv0000105Bsd0000E01Fbc*sc*i* alias: pci:v0000168Cd0000002Asv00001A3Bsd00001C71bc*sc*i* alias: pci:v0000168Cd0000002Asv*sd*bc*sc*i* alias: pci:v0000168Cd00000029sv*sd*bc*sc*i* alias: pci:v0000168Cd00000027sv*sd*bc*sc*i* alias: pci:v0000168Cd00000024sv*sd*bc*sc*i* alias: pci:v0000168Cd00000023sv*sd*bc*sc*i* depends: ath9k_hw,mac80211,ath9k_common,cfg80211,ath intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 parm: debug:Debugging mask (uint) parm: nohwcrypt:Disable hardware encryption (int) parm: blink:Enable LED blink on activity (int) parm: btcoex_enable:Enable wifi-BT coexistence (int) parm: bt_ant_diversity:Enable WLAN/BT RX antenna diversity (int) parm: ps_enable:Enable WLAN PowerSave (int) filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko license: Dual BSD/GPL description: Shared library for Atheros wireless 802.11n LAN cards. author: Atheros Communications srcversion: 696B00A6C59713EC0966997 depends: ath,ath9k_hw intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko license: Dual BSD/GPL description: Support for Atheros 802.11n wireless LAN cards. author: Atheros Communications srcversion: 4809F3842A0542CD6B556D3 depends: ath intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath.ko license: Dual BSD/GPL description: Shared library for Atheros wireless LAN cards. author: Atheros Communications srcversion: 88A67C5359B02C5A710AFCF depends: cfg80211 intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 ##### modules ##### lp rtc ##### blacklist ##### [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac [/etc/modprobe.d/fbdev-blacklist.conf] blacklist arkfb blacklist aty128fb blacklist atyfb blacklist radeonfb blacklist cirrusfb blacklist cyber2000fb blacklist gx1fb blacklist gxfb blacklist kyrofb blacklist matroxfb_base blacklist mb862xxfb blacklist neofb blacklist nvidiafb blacklist pm2fb blacklist pm3fb blacklist s3fb blacklist savagefb blacklist sisfb blacklist tdfxfb blacklist tridentfb blacklist viafb blacklist vt8623fb ##### udev rules ##### # PCI device 0x1969:0x1090 (alx) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x168c:0x0036 (ath9k) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0" ##### dmesg ##### [ 1.707662] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f03) [ 11.918852] ath: phy0: WB335 1-ANT card detected [ 11.918856] ath: phy0: Set BT/WLAN RX diversity capability [ 11.926438] ath: phy0: Enable LNA combining [ 11.928469] ath: phy0: ASPM enabled: 0x42 [ 11.928473] ath: EEPROM regdomain: 0x65 [ 11.928475] ath: EEPROM indicates we should expect a direct regpair map [ 11.928478] ath: Country alpha2 being used: 00 [ 11.928479] ath: Regpair used: 0x65 [ 14.066021] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready ########## wireless info END ############

    Read the article

  • SQL SERVER – Weekly Series – Memory Lane – #039

    - by Pinal Dave
    Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 FQL – Facebook Query Language Facebook list following advantages of FQL: Condensed XML reduces bandwidth and parsing costs. More complex requests can reduce the number of requests necessary. Provides a single consistent, unified interface for all of your data. It’s fun! UDF – Get the Day of the Week Function The day of the week can be retrieved in SQL Server by using the DatePart function. The value returned by the function is between 1 (Sunday) and 7 (Saturday). To convert this to a string representing the day of the week, use a CASE statement. UDF – Function to Get Previous And Next Work Day – Exclude Saturday and Sunday While reading ColdFusion blog of Ben Nadel Getting the Previous Day In ColdFusion, Excluding Saturday And Sunday, I realize that I use similar function on my SQL Server Database. This function excludes the Weekends (Saturday and Sunday), and it gets previous as well as next work day. Complete Series of SQL Server Interview Questions and Answers Data Warehousing Interview Questions and Answers – Introduction Data Warehousing Interview Questions and Answers – Part 1 Data Warehousing Interview Questions and Answers – Part 2 Data Warehousing Interview Questions and Answers – Part 3 Data Warehousing Interview Questions and Answers Complete List Download 2008 Introduction to Log Viewer In SQL Server all the windows event logs can be seen along with SQL Server logs. Interface for all the logs is same and can be launched from the same place. This log can be exported and filtered as well. DBCC SHRINKFILE Takes Long Time to Run If you are DBA who are involved with Database Maintenance and file group maintenance, you must have experience that many times DBCC SHRINKFILE operations takes a long time but any other operations with Database are relatively quicker. mssqlsystemresource – Resource Database The purpose of resource database is to facilitates upgrading to the new version of SQL Server without any hassle. In previous versions whenever version of SQL Server was upgraded all the previous version system objects needs to be dropped and new version system objects to be created. 2009 Puzzle – Write Script to Generate Primary Key and Foreign Key In SQL Server Management Studio (SSMS), there is no option to script all the keys. If one is required to script keys they will have to manually script each key one at a time. If database has many tables, generating one key at a time can be a very intricate task. I want to throw a question to all of you if any of you have scripts for the same purpose. Maximizing View of SQL Server Management Studio – Full Screen – New Screen I had explained the following two different methods: 1) Open Results in Separate Tab - This is a very interesting method as result pan shows up in a different tab instead of the splitting screen horizontally. 2) Open SSMS in Full Screen - This works always and to its best. Not many people are aware of this method; hence, very few people use it to enhance performance. 2010 Find Queries using Parallelism from Cached Plan T-SQL script gets all the queries and their execution plan where parallelism operations are kicked up. Pay attention there is TOP 10 is used, if you have lots of transactional operations, I suggest that you change TOP 10 to TOP 50 This is the list of the all the articles in the series of computed columns. SQL SERVER – Computed Column – PERSISTED and Storage This article talks about how computed columns are created and why they take more storage space than before. SQL SERVER – Computed Column – PERSISTED and Performance This article talks about how PERSISTED columns give better performance than non-persisted columns. SQL SERVER – Computed Column – PERSISTED and Performance – Part 2 This article talks about how non-persisted columns give better performance than PERSISTED columns. SQL SERVER – Computed Column and Performance – Part 3 This article talks about how Index improves the performance of Computed Columns. SQL SERVER – Computed Column – PERSISTED and Storage – Part 2 This article talks about how creating index on computed column does not grow the row length of table. SQL SERVER – Computed Columns – Index and Performance This article summarized all the articles related to computed columns. 2011 SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Data Warehousing Concepts – Day 21 of 31 What is Data Warehousing? What is Business Intelligence (BI)? What is a Dimension Table? What is Dimensional Modeling? What is a Fact Table? What are the Fundamental Stages of Data Warehousing? What are the Different Methods of Loading Dimension tables? Describes the Foreign Key Columns in Fact Table and Dimension Table? What is Data Mining? What is the Difference between a View and a Materialized View? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Data Warehousing Concepts – Day 22 of 31 What is OLTP? What is OLAP? What is the Difference between OLTP and OLAP? What is ODS? What is ER Diagram? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Data Warehousing Concepts – Day 23 of 31 What is ETL? What is VLDB? Is OLTP Database is Design Optimal for Data Warehouse? If denormalizing improves Data Warehouse Processes, then why is the Fact Table is in the Normal Form? What are Lookup Tables? What are Aggregate Tables? What is Real-Time Data-Warehousing? What are Conformed Dimensions? What is a Conformed Fact? How do you Load the Time Dimension? What is a Level of Granularity of a Fact Table? What are Non-Additive Facts? What is a Factless Facts Table? What are Slowly Changing Dimensions (SCD)? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Data Warehousing Concepts – Day 24 of 31 What is Hybrid Slowly Changing Dimension? What is BUS Schema? What is a Star Schema? What Snow Flake Schema? Differences between the Star and Snowflake Schema? What is Difference between ER Modeling and Dimensional Modeling? What is Degenerate Dimension Table? Why is Data Modeling Important? What is a Surrogate Key? What is Junk Dimension? What is a Data Mart? What is the Difference between OLAP and Data Warehouse? What is a Cube and Linked Cube with Reference to Data Warehouse? What is Snapshot with Reference to Data Warehouse? What is Active Data Warehousing? What is the Difference between Data Warehousing and Business Intelligence? What is MDS? Explain the Paradigm of Bill Inmon and Ralph Kimball. SQL SERVER – Azure Interview Questions and Answers – Guest Post by Paras Doshi – Day 25 of 31 Paras Doshi has submitted 21 interesting question and answers for SQL Azure. 1.What is SQL Azure? 2.What is cloud computing? 3.How is SQL Azure different than SQL server? 4.How many replicas are maintained for each SQL Azure database? 5.How can we migrate from SQL server to SQL Azure? 6.Which tools are available to manage SQL Azure databases and servers? 7.Tell me something about security and SQL Azure. 8.What is SQL Azure Firewall? 9.What is the difference between web edition and business edition? 10.How do we synchronize On Premise SQL server with SQL Azure? 11.How do we Backup SQL Azure Data? 12.What is the current pricing model of SQL Azure? 13.What is the current limitation of the size of SQL Azure DB? 14.How do you handle datasets larger than 50 GB? 15.What happens when the SQL Azure database reaches Max Size? 16.How many databases can we create in a single server? 17.How many servers can we create in a single subscription? 18.How do you improve the performance of a SQL Azure Database? 19.What is code near application topology? 20.What were the latest updates to SQL Azure service? 21.When does a workload on SQL Azure get throttled? SQL SERVER – Interview Questions and Answers – Guest Post by Malathi Mahadevan – Day 26 of 31 Malachi had asked a simple question which has several answers. Each answer makes you think and ponder about the reality of the IT world. Look at the simple question – ‘What is the toughest challenge you have faced in your present job and how did you handle it’? and its various answers. Each answer has its own story. SQL SERVER – Interview Questions and Answers – Guest Post by Rick Morelan – Day 27 of 31 Rick Morelan of Joes2Pros has written an excellent blog post on the subject how to find top N values. Most people are fully aware of how the TOP keyword works with a SELECT statement. After years preparing so many students to pass the SQL Certification I noticed they were pretty well prepared for job interviews too. Yes, they would do well in the interview but not great. There seemed to be a few questions that would come up repeatedly for almost everyone. Rick addresses similar questions in his lucid writing skills. 2012 Observation of Top with Index and Order of Resultset SQL Server has lots of things to learn and share. It is amazing to see how people evaluate and understand different techniques and styles differently when implementing. The real reason may be absolutely different but we may blame something totally different for the incorrect results. Read the blog post to learn more. How do I Record Video and Webcast How to Convert Hex to Decimal or INT Earlier I asked regarding a question about how to convert Hex to Decimal. I promised that I will post an answer with Due Credit to the author but never got around to post a blog post around it. Read the original post over here SQL SERVER – Question – How to Convert Hex to Decimal. Query to Get Unique Distinct Data Based on Condition – Eliminate Duplicate Data from Resultset The natural reaction will be to suggest DISTINCT or GROUP BY. However, not all the questions can be solved by DISTINCT or GROUP BY. Let us see the following example, where a user wanted only latest records to be displayed. Let us see the example to understand further. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • How does one get rid of fishy behavior in Windows?

    - by Tom Wijsman
    After I had boot my computer this morning there suddenly flooded water from the top of the screen, after which some fishes dropped into it. Now I can barely see what I am doing because the water distorts the view. Sometimes the fish follow the cursor so I need to move it away or wait for the fish to mind their own business. This makes it very annoying to use my system. What have I tried? Reboot the system. This caused the water to deplete from the desktop. Upon reboot, the screen was refilled with water and fishes. Attach another monitor. Same problem, fills that monitor as well and gives me extra fish. Clicking the fish. Makes them turn direction. Right clicking the fish. Changes color of the fish, not really useful. I'm locked out of changing the background or screen saver settings. Hence, I had to post the lady below... Safe mode doesn't save me from the fishes. It does give me another background there, but I can't screenshot easily. Other user accounts experience this as well. The Guest account seems to experience more fish than the other accounts. Using HijackThis, OTL Timekeeper List, Syninternal Autoruns, RootKitRevealer, ShellExView and similar tools I can't seem to find any entries that could be it, the Sysinternals tools show everything as verified. I'm suspecting this to be a driver problem. Randomly removing drivers doesn't seem to alleviate the problem. When removing the Graphics Drivers, it makes my screen black. While that could be considered the solution, it's not what I want. Changing the time / date settings does also not seem to affect the fishes. Changing the time a few years in the future, I would have expected the fishes to be dead. But, the same fishes are still there... They simply won't die! Tried to get used to them. They are really bothering me, looks like they require food. I don't know how to give them food, but apparently they get it elsewhere during reboot... Tried to disable my mouse pointer and use the keyboard. This works, they now swim around more randomly. They do put their attention to huge changes on the screen, so I need to type slow. Or otherwise I can't see what I'm tying exactly. Hold my laptop upside down. This seems to affect the water and fishes, but the water stays in the screen. They seem super resistant against water sickness and confusion though... What does the problem look like? What do I need? A way to get rid of these fishes on my screen forever, they are really annoying me a lot and I'm about to crack the screen to see if that makes them escape. Do you have any idea why this problem is occurring? What are my considerations? Buying an USB fish tank could make the fish leave the screen, I am uncertain though whether the fish could leave the screen through the USB cable. Using the FISh (programming language) which seems to provide EXPRESSIVE POWER and EFFICIENT EXECUTION, I can however not find any examples on how to remove fish. What are my Specifications? I'm using a Sony Vaio Fishy laptop. Sony VAIO VGN-Fishy, VAIO. Processor: 1337 MHz, Intel Core 2 Duo, T5432, 1 MB, Intel PM965 Express, 667 MHz. Memory: 1024 MB, DDR2-SDRAM, 667 MHz, 2 x 1024 MB, 4 GB. Disk Drive: 50 GB, Serial ATA, 5400 RPM. Storage Media: Memory Stick™, Memory Stick PRO™. Display: 15.4 ", 1280 x 800 pixels, LCD. Video: GeForce 8400M GT, 128 MB. Optical Drive: DVD±R/RW DL, 24 x, 24 x, 24 x, 6 x, 4 x, 6 x, 4 x, 5 x, 5 x, 8 x, 8 x, 8 x, 8 x, 6 x, 6 x, 24 x, 24 x, 24 x, 16 x. Camera: 1.3 MP, 30 fps. Networking: 2.0+EDR. Keyboard: Touchpad, AZERTY. Operating System/Software: Windows Vista Home Premium. Security: Kensington. Weight & Dimensions: 98.8 oz (2800 g), 14 " (355.8 mm), 10 " (254.4 mm), 0.98 " (24.9 mm). Other features: 100 BASE-TX/10 BASE-T, 802.11a/b/g/n/Draft n, V92/V.90, fishes. Plz! Help me...

    Read the article

  • Optimizing MySQL for small VPS

    - by Chris M
    I'm trying to optimize my MySQL config for a verrry small VPS. The VPS is also running NGINX/PHP-FPM and Magento; all with a limit of 250MB of RAM. This is an output of MySQL Tuner... -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.1.41-3ubuntu12.8 [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in MyISAM tables: 1M (Tables: 14) [--] Data in InnoDB tables: 29M (Tables: 301) [--] Data in MEMORY tables: 1M (Tables: 17) [!!] Total fragmented tables: 301 -------- Security Recommendations ------------------------------------------- [OK] All database users have passwords assigned -------- Performance Metrics ------------------------------------------------- [--] Up for: 2d 11h 14m 58s (1M q [8.038 qps], 33K conn, TX: 2B, RX: 618M) [--] Reads / Writes: 83% / 17% [--] Total buffers: 122.0M global + 8.6M per thread (100 max threads) [!!] Maximum possible memory usage: 978.2M (404% of installed RAM) [OK] Slow queries: 0% (37/1M) [OK] Highest usage of available connections: 6% (6/100) [OK] Key buffer size / total MyISAM indexes: 32.0M/282.0K [OK] Key buffer hit rate: 99.7% (358K cached / 1K reads) [OK] Query cache efficiency: 83.4% (1M cached / 1M selects) [!!] Query cache prunes per day: 48301 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 144K sorts) [OK] Temporary tables created on disk: 13% (27K on disk / 203K total) [OK] Thread cache hit rate: 99% (6 created / 33K connections) [!!] Table cache hit rate: 0% (32 open / 51K opened) [OK] Open file limit used: 1% (20/1K) [OK] Table locks acquired immediately: 99% (1M immediate / 1M locks) [!!] InnoDB data size / buffer pool: 29.2M/8.0M -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance Reduce your overall MySQL memory footprint for system stability Enable the slow query log to troubleshoot bad queries Increase table_cache gradually to avoid file descriptor limits Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 64M) table_cache (> 32) innodb_buffer_pool_size (>= 29M) and this is the config. # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 32M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 sort_buffer_size = 4M read_buffer_size = 4M myisam_sort_buffer_size = 16M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 100 table_cache = 32 tmp_table_size = 128M #thread_concurrency = 10 # # * Query Cache Configuration # #query_cache_limit = 1M query_cache_type = 1 query_cache_size = 64M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ The site contains 1 wordpress site,so lots of MYISAM but mostly static content as its not changing all that often (A wordpress cache plugin deals with this). And the Magento Site which consists of a lot of InnoDB tables, some MyISAM and some INMEMORY. The "read" side seems to be running pretty well with a mass of optimizations I've used on Magento, the NGINX setup and PHP-FPM + XCACHE. I'd love to have a kick in the right direction with the MySQL config so I'm not blindly altering it based on the MySQLTuner without understanding what I'm changing. Thanks

    Read the article

  • SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

    - by digby280
    I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • Server Memory with Magento

    - by Mohamed Elgharabawy
    I have a cloud server with the following specifications: 2vCPUs 4G RAM 160GB Disk Space Network 400Mb/s System Image: Ubuntu 12.04 LTS I am only running Magento CE 1.7.0.2 on this server. Nothing else. Usually, the server has a loading time of 4-5 seconds. Recently, this has dropped to over 30 seconds and sometimes the server just goes away and I get HTTP error reports to my email stating that HTTP requests took more than 20000ms. Running top command and sorting them returns the following: top - 15:29:07 up 3:40, 1 user, load average: 28.59, 25.95, 22.91 Tasks: 112 total, 30 running, 82 sleeping, 0 stopped, 0 zombie Cpu(s): 90.2%us, 9.3%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.3%si, 0.2%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 31901 www-data 20 0 360m 71m 5840 R 7 1.8 1:39.51 apache2 32084 www-data 20 0 362m 72m 5548 R 7 1.8 1:31.56 apache2 32089 www-data 20 0 348m 59m 5660 R 7 1.5 1:41.74 apache2 32295 www-data 20 0 343m 54m 5532 R 7 1.4 2:00.78 apache2 32303 www-data 20 0 354m 65m 5260 R 7 1.6 1:38.76 apache2 32304 www-data 20 0 346m 56m 5544 R 7 1.4 1:41.26 apache2 32305 www-data 20 0 348m 59m 5640 R 7 1.5 1:50.11 apache2 32291 www-data 20 0 358m 69m 5256 R 6 1.7 1:44.26 apache2 32517 www-data 20 0 345m 56m 5532 R 6 1.4 1:45.56 apache2 30473 www-data 20 0 355m 66m 5680 R 6 1.7 2:00.05 apache2 32093 www-data 20 0 352m 63m 5848 R 6 1.6 1:53.23 apache2 32302 www-data 20 0 345m 56m 5512 R 6 1.4 1:55.87 apache2 32433 www-data 20 0 346m 57m 5500 S 6 1.4 1:31.58 apache2 32638 www-data 20 0 354m 65m 5508 R 6 1.6 1:36.59 apache2 32230 www-data 20 0 347m 57m 5524 R 6 1.4 1:33.96 apache2 32231 www-data 20 0 355m 66m 5512 R 6 1.7 1:37.47 apache2 32233 www-data 20 0 354m 64m 6032 R 6 1.6 1:59.74 apache2 32300 www-data 20 0 355m 66m 5672 R 6 1.7 1:43.76 apache2 32510 www-data 20 0 347m 58m 5512 R 6 1.5 1:42.54 apache2 32521 www-data 20 0 348m 59m 5508 R 6 1.5 1:47.99 apache2 32639 www-data 20 0 344m 55m 5512 R 6 1.4 1:34.25 apache2 32083 www-data 20 0 345m 56m 5696 R 5 1.4 1:59.42 apache2 32085 www-data 20 0 347m 58m 5692 R 5 1.5 1:42.29 apache2 32293 www-data 20 0 353m 64m 5676 R 5 1.6 1:52.73 apache2 32301 www-data 20 0 348m 59m 5564 R 5 1.5 1:49.63 apache2 32528 www-data 20 0 351m 62m 5520 R 5 1.6 1:36.11 apache2 31523 mysql 20 0 3460m 576m 8288 S 5 14.4 2:06.91 mysqld 32002 www-data 20 0 345m 55m 5512 R 5 1.4 2:01.88 apache2 32080 www-data 20 0 357m 68m 5512 S 5 1.7 1:31.30 apache2 32163 www-data 20 0 347m 58m 5512 S 5 1.5 1:58.68 apache2 32509 www-data 20 0 345m 56m 5504 R 5 1.4 1:49.54 apache2 32306 www-data 20 0 358m 68m 5504 S 4 1.7 1:53.29 apache2 32165 www-data 20 0 344m 55m 5524 S 4 1.4 1:40.71 apache2 32640 www-data 20 0 345m 56m 5528 R 4 1.4 1:36.49 apache2 31888 www-data 20 0 359m 70m 5664 R 4 1.8 1:57.07 apache2 32511 www-data 20 0 357m 67m 5512 S 3 1.7 1:47.00 apache2 32054 www-data 20 0 357m 68m 5660 S 2 1.7 1:53.10 apache2 1 root 20 0 24452 2276 1232 S 0 0.1 0:01.58 init Moreover, running free -m returns the following: total used free shared buffers cached Mem: 4003 3919 83 0 118 901 -/+ buffers/cache: 2899 1103 Swap: 0 0 0 To investigate this further, I have installed apache buddy, it recommeneded that I need to reduce the maxclient connections. Which I did. I also installed MysqlTuner and it suggests that I need to set my innodb_buffer_pool_size to = 3.0G. However, I cannot do that, since the whole memory is 4G. Here is the output from apache buddy: ### GENERAL REPORT ### Settings considered for this report: Your server's physical RAM: 4003MB Apache's MaxClients directive: 40 Apache MPM Model: prefork Largest Apache process (by memory): 73.77MB [ OK ] Your MaxClients setting is within an acceptable range. Max potential memory usage: 2950.8 MB Percentage of RAM allocated to Apache 73.72 % And this is the output of MySQLTuner: -------- Performance Metrics ------------------------------------------------- [--] Up for: 47m 22s (675K q [237.552 qps], 12K conn, TX: 1B, RX: 300M) [--] Reads / Writes: 45% / 55% [--] Total buffers: 2.1G global + 2.7M per thread (151 max threads) [OK] Maximum possible memory usage: 2.5G (64% of installed RAM) [OK] Slow queries: 0% (0/675K) [OK] Highest usage of available connections: 26% (40/151) [OK] Key buffer size / total MyISAM indexes: 36.0M/18.7M [OK] Key buffer hit rate: 100.0% (245K cached / 105 reads) [OK] Query cache efficiency: 92.5% (500K cached / 541K selects) [!!] Query cache prunes per day: 302886 [OK] Sorts requiring temporary tables: 0% (1 temp sorts / 15K sorts) [!!] Joins performed without indexes: 12135 [OK] Temporary tables created on disk: 25% (8K on disk / 32K total) [OK] Thread cache hit rate: 90% (1K created / 12K connections) [!!] Table cache hit rate: 17% (400 open / 2K opened) [OK] Open file limit used: 12% (123/1K) [OK] Table locks acquired immediately: 100% (196K immediate / 196K locks) [!!] InnoDB buffer pool / data size: 2.0G/3.5G [OK] InnoDB log waits: 0 -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries Adjust your join queries to always utilize indexes Increase table_cache gradually to avoid file descriptor limits Read this before increasing table_cache over 64: http://bit.ly/1mi7c4C Variables to adjust: query_cache_size ( 64M) join_buffer_size ( 128.0K, or always use indexes with joins) table_cache ( 400) innodb_buffer_pool_size (= 3G) Last but not least, the server still has more than 60% of free disk space. Now, based on the above, I have few questions: Are these numbers normal? Do they make sense? Do I need to upgrade the server? If I don't need to upgrade and my configuration is not correct, how do I optimize it?

    Read the article

  • Row Number Transformation

    The Row Number Transformation calculates a row number for each row, and adds this as a new output column to the data flow. The column number is a sequential number, based on a seed value. Each row receives the next number in the sequence, based on the defined increment value. The final row number can be stored in a variable for later analysis, and can be used as part of a process to validate the integrity of the data movement. The Row Number transform has a variety of uses, such as generating surrogate keys, or as the basis for a data partitioning scheme when combined with the Conditional Split transformation. Properties Property Data Type Description Seed Int32 The first row number or seed value. Increment Int32 The value added to the previous row number to make the next row number. OutputVariable String The name of the variable into which the final row number is written post execution. (Optional). The three properties have been configured to support expressions, or they can set directly in the normal manner. Expressions on components are only visible on the hosting Data Flow task, not at the individual component level. Sometimes the data type of the property is incorrectly set when the properties are created, see the Troubleshooting section below for details on how to fix this. Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. For 2005/2008 Only - Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Row Number transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations, and this component requires a minimum of SQL Server 2005 Service Pack 1. Downloads The Row Number Transformation  is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Row Number Transformation for SQL Server 2005 Row Number Transformation for SQL Server 2008 Row Number Transformation for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.6 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.5 - SQL Server 2008 release. (15 Oct 2008) SQL Server 2005 Version 1.2.0.34 – Updated installer. (25 Jun 2008) Version 1.2.0.7 - SQL Server 2005 RTM Refresh. SP1 Compatibility Testing. Added the ability to reuse an existing column to hold the generated row number, as an alternative to the default of adding a new column to the output. (18 Jun 2006) Version 1.2.0.7 - SQL Server 2005 RTM Refresh. SP1 Compatibility Testing. Added the ability to reuse an existing column to hold the generated row number, as an alternative to the default of adding a new column to the output. (18 Jun 2006) Version 1.0.0.0 - Public Release for SQL Server 2005 IDW 15 June CTP (29 Aug 2005) Screenshot Code Sample The following code sample demonstrates using the Data Generator Source and Row Number Transformation programmatically in a very simple package. Package package = new Package(); package.Name = "Data Generator & Row Number"; // Add the Data Flow Task Executable taskExecutable = package.Executables.Add("STOCK:PipelineTask"); // Get the task host wrapper, and the Data Flow task TaskHost taskHost = taskExecutable as TaskHost; MainPipe dataFlowTask = (MainPipe)taskHost.InnerObject; // Add Data Generator Source IDTSComponentMetaData100 componentSource = dataFlowTask.ComponentMetaDataCollection.New(); componentSource.Name = "Data Generator"; componentSource.ComponentClassID = "Konesans.Dts.Pipeline.DataGenerator.DataGenerator, Konesans.Dts.Pipeline.DataGenerator, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b2ab4a111192992b"; CManagedComponentWrapper instanceSource = componentSource.Instantiate(); instanceSource.ProvideComponentProperties(); instanceSource.SetComponentProperty("RowCount", 10000); // Add Row Number Tx IDTSComponentMetaData100 componentRowNumber = dataFlowTask.ComponentMetaDataCollection.New(); componentRowNumber.Name = "FlatFileDestination"; componentRowNumber.ComponentClassID = "Konesans.Dts.Pipeline.RowNumberTransform.RowNumberTransform, Konesans.Dts.Pipeline.RowNumberTransform, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b2ab4a111192992b"; CManagedComponentWrapper instanceRowNumber = componentRowNumber.Instantiate(); instanceRowNumber.ProvideComponentProperties(); instanceRowNumber.SetComponentProperty("Increment", 10); // Connect the two components together IDTSPath100 path = dataFlowTask.PathCollection.New(); path.AttachPathAndPropagateNotifications(componentSource.OutputCollection[0], componentRowNumber.InputCollection[0]); #if DEBUG // Save package to disk, DEBUG only new Application().SaveToXml(String.Format(@"C:\Temp\{0}.dtsx", package.Name), package, null); #endif package.Execute(); foreach (DtsError error in package.Errors) { Console.WriteLine("ErrorCode : {0}", error.ErrorCode); Console.WriteLine(" SubComponent : {0}", error.SubComponent); Console.WriteLine(" Description : {0}", error.Description); } package.Dispose(); Troubleshooting Make sure you have downloaded the version that matches your version of SQL Server. We offer separate downloads for SQL Server 2005, SQL Server 2008 and SQL Server 2012. If you get an error when you try and use the component along the lines of The component could not be added to the Data Flow task. Please verify that this component is properly installed.  ... The data flow object "Konesans ..." is not installed correctly on this computer, this usually indicates that the internal cache of SSIS components needs to be updated. This is held by the SSIS service, so you need restart the the SQL Server Integration Services service. You can do this from the Services applet in Control Panel or Administrative Tools in Windows. You can also restart the computer if you prefer. You may also need to restart any current instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Once installation is complete you need to manually add the task to the toolbox before you will see it and to be able add it to packages - How do I install a task or transform component? Please also make sure you have installed a minimum of SP1 for SQL 2005. The IDtsPipelineEnvironmentService was added in SQL Server 2005 Service Pack 1 (SP1) (See  http://support.microsoft.com/kb/916940). If you get an error Could not load type 'Microsoft.SqlServer.Dts.Design.IDtsPipelineEnvironmentService' from assembly 'Microsoft.SqlServer.Dts.Design, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'. when trying to open the user interface, it implies that your development machine has not had SP1 applied. Very occasionally we get a problem to do with the properties not being created with the correct data type. Since there is no way to programmatically to define the data type of a pipeline component property, it can only infer it. Whilst we set an integer value as we create the property, sometimes SSIS decides to define it is a decimal. This is often highlighted when you use a property expression against the property and get an error similar to Cannot convert System.Int32 to System.Decimal. Unfortunately this is beyond our control and there appears to be no pattern as to when this happens. If you do have more information we would be happy to hear it. To fix this issue you can manually edit the package file. In Visual Studio right click the package file from the Solution Explorer and select View Code, which will open the package as raw XML. You can now search for the properties by name or the component name. You can then change the incorrect property data types highlighted below from Decimal to Int32. <component id="37" name="Row Number Transformation" componentClassID="{BF01D463-7089-41EE-8F05-0A6DC17CE633}" … >     <properties>         <property id="38" name="UserComponentTypeName" …>         <property id="41" name="Seed" dataType="System.Int32" ...>10</property>         <property id="42" name="Increment" dataType="System.Decimal" ...>10</property>         ... If you are still having issues then contact us, but please provide as much detail as possible about error, as well as which version of the the task you are using and details of the SSIS tools installed.

    Read the article

  • Other Ideas to troubleshoot Cisco IPSec VPN on OSX?

    - by Tawm
    We have one user running OSX Snow Leopard who is having issues staying connected to our VPN running off of an ASA5510. His connection can die even as he's actively pushing traffic across it or if he's been idle for a period of time. Other users on Snow Leopard, Lion, XP, Vista, 7 and various linux flavors are able to stay connected for 24hrs+ without issue We've deleted and remade the connection in System Preferences Networking, ran killall racoon (kills any lingering connections) Below are the logs from the user's system.log from a connect/disconnect cycle: Oct 10 21:22:25 username racoon[8192]: Connecting. Oct 10 21:22:25 username racoon[8192]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1). Oct 10 21:22:25 username racoon[8192]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2). Oct 10 21:22:25 username racoon[8192]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2). Oct 10 21:22:25 username racoon[8192]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode). Oct 10 21:22:25 username racoon[8192]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Mode-Config message). Oct 10 21:22:29 username racoon[8192]: IKEv1 XAUTH: success. (XAUTH Status is OK). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Mode-Config message). Oct 10 21:22:29 username racoon[8192]: IKEv1 Config: retransmited. (Mode-Config retransmit). Oct 10 21:22:29 username racoon[8192]: IKE Packet: receive success. (MODE-Config). Oct 10 21:22:29 username configd[14]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.0.100), current interface setting (name: utun0, family: 1001, address: 10.215.8.53, subnet: 255.0.0.0, destination: 10.215.8.53). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Oct 10 21:22:29 username configd[14]: network configuration changed. Oct 10 21:22:29 username racoon[8192]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Oct 10 21:22:29 username racoon[8192]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Oct 10 21:22:29 username racoon[8192]: Connected. Oct 10 21:22:29 username configd[14]: SCNCController: Connected. Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Oct 10 21:22:29 username racoon[8192]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Oct 10 21:22:29 username racoon[8192]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Oct 10 21:22:29 username racoon[8192]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Oct 10 21:22:47 username login[8200]: USER_PROCESS: 8200 ttys003 Oct 10 21:22:48 username GrowlHelperApp[160]: Periodic CFURLCache Insert stats (iters: 17240) - Tx time:0.001749, # of Inserts: 1, # of bytes written: 304, Did shrink: NO, Size of cache-file: 26624, Num of Failures: 0 Oct 10 21:25:24 username login[7367]: DEAD_PROCESS: 7367 ttys002 Oct 10 21:25:31 username login[7907]: DEAD_PROCESS: 7907 ttys001 Oct 10 21:27:32 username configd[14]: SCNCController: Disconnecting. (Connection was up for, 303 seconds). Oct 10 21:27:32 username racoon[8192]: IKE Packet: transmit success. (Information message). Oct 10 21:27:32 username racoon[8192]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Oct 10 21:27:32 username racoon[8192]: IKE Packet: transmit success. (Information message). Oct 10 21:27:32 username racoon[8192]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Oct 10 21:27:32 username racoon[8192]: IKE Packet: transmit success. (Information message). Oct 10 21:27:32 username racoon[8192]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Oct 10 21:27:32 username racoon[8192]: Disconnecting. (Connection was up for, 302.766105 seconds). Oct 10 21:27:32 username configd[14]: network configuration changed. Oct 10 21:27:34 username login[8200]: DEAD_PROCESS: 8200 ttys003

    Read the article

  • How do I prevent missing network from slowing down boot-up?

    - by Ravi S Ghosh
    I have been having rather slow boot on Ubuntu 12.04. Lately, I tried to figure out the reason and it seems to be the network connection which does not get connected and requires multiple attempts. Here is part of dmesg [ 2.174349] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.174352] EXT4-fs (sda2): write access will be enabled during recovery [ 2.308172] firewire_core: created device fw0: GUID 384fc00005198d58, S400 [ 2.333457] usb 7-1.2: new low-speed USB device number 3 using uhci_hcd [ 2.465896] EXT4-fs (sda2): recovery complete [ 2.466406] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.589440] usb 7-1.3: new low-speed USB device number 4 using uhci_hcd **[ 18.292029] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 18.458958] udevd[377]: starting version 175 [ 18.639482] Adding 4200960k swap on /dev/sda5. Priority:-1 extents:1 across:4200960k [ 19.314127] wmi: Mapper loaded [ 19.426602] r592 0000:09:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.426739] r592: driver successfully loaded [ 19.460105] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 19.493629] lp: driver loaded but no devices found [ 19.497012] cfg80211: Calling CRDA to update world regulatory domain [ 19.535523] ACPI Warning: _BQC returned an invalid level (20110623/video-480) [ 19.539457] acpi device:03: registered as cooling_device2 [ 19.539520] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 19.539568] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 19.578060] Linux video capture interface: v2.00 [ 19.667708] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 19.763171] r852 0000:09:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.763258] r852: driver loaded successfully [ 19.854769] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.0/input/input7 [ 19.854864] generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input0 [ 19.878605] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.1/input/input8 [ 19.878698] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input1 [ 19.902779] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.3/7-1.3:1.0/input/input9 [ 19.925034] generic-usb 0003:046D:C063.0003: input,hidraw2: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1d.1-1.3/input0 [ 19.925057] usbcore: registered new interface driver usbhid [ 19.925059] usbhid: USB HID core driver [ 19.942362] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63ea) [ 19.947004] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10 [ 19.947075] usbcore: registered new interface driver uvcvideo [ 19.947077] USB Video Class driver (1.1.1) [ 20.145232] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 20.145235] Copyright(c) 2003-2011 Intel Corporation [ 20.145327] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.145357] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 20.145402] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 20.145404] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90000674000 [ 20.145407] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 20.145531] iwlwifi 0000:04:00.0: irq 46 for MSI/MSI-X [ 20.145613] iwlwifi 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 20.145720] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 20.167535] iwlwifi 0000:04:00.0: device EEPROM VER=0x11f, CALIB=0x4 [ 20.167538] iwlwifi 0000:04:00.0: Device SKU: 0Xf0 [ 20.167567] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 20.172779] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 20.172783] Disabling lock debugging due to kernel taint [ 20.250115] [fglrx] Maximum main memory to use for locked dma buffers: 3759 MBytes. [ 20.250567] [fglrx] vendor: 1002 device: 9553 count: 1 [ 20.251256] [fglrx] ioport: bar 1, base 0x2000, size: 0x100 [ 20.251271] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.251277] pci 0000:01:00.0: setting latency timer to 64 [ 20.251559] [fglrx] Kernel PAT support is enabled [ 20.251578] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 20.310385] iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692 [ 20.310598] Registered led device: phy0-led [ 20.310628] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.372306] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 20.411015] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 20.454232] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 20.545636] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.545640] cfg80211: World regulatory domain updated: [ 20.545642] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.545644] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545647] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545649] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545652] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545654] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.609484] type=1400 audit(1340502633.160:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=693 comm="apparmor_parser" [ 20.609494] type=1400 audit(1340502633.160:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=642 comm="apparmor_parser" [ 20.609843] type=1400 audit(1340502633.160:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=693 comm="apparmor_parser" [ 20.609852] type=1400 audit(1340502633.160:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser" [ 20.610047] type=1400 audit(1340502633.160:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=693 comm="apparmor_parser" [ 20.610060] type=1400 audit(1340502633.160:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser" [ 20.610476] type=1400 audit(1340502633.160:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=814 comm="apparmor_parser" [ 20.610829] type=1400 audit(1340502633.160:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=814 comm="apparmor_parser" [ 20.611035] type=1400 audit(1340502633.160:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=814 comm="apparmor_parser" [ 20.661912] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 20.661982] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 20.662013] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 20.770289] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 20.770689] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 20.770786] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X [ 20.770815] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 20.994040] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 20.994189] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 21.554799] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 21.554802] vesafb: scrolling: redraw [ 21.554804] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 21.557342] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 3072k, total 3072k [ 21.557498] Console: switching to colour frame buffer device 128x48 [ 21.557516] fb0: VESA VGA frame buffer device [ 21.987338] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 22.184693] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 27.362440] iwlwifi 0000:04:00.0: RF_KILL bit toggled to disable radio. [ 27.436988] init: failsafe main process (986) killed by TERM signal [ 27.970112] ppdev: user-space parallel port driver [ 28.198917] Bluetooth: Core ver 2.16 [ 28.198935] NET: Registered protocol family 31 [ 28.198937] Bluetooth: HCI device and connection manager initialized [ 28.198940] Bluetooth: HCI socket layer initialized [ 28.198941] Bluetooth: L2CAP socket layer initialized [ 28.198947] Bluetooth: SCO socket layer initialized [ 28.226135] Bluetooth: RFCOMM TTY layer initialized [ 28.226141] Bluetooth: RFCOMM socket layer initialized [ 28.226143] Bluetooth: RFCOMM ver 1.11 [ 28.445620] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.445623] Bluetooth: BNEP filters: protocol multicast [ 28.524578] type=1400 audit(1340502641.076:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1052 comm="apparmor_parser" [ 28.525018] type=1400 audit(1340502641.076:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1052 comm="apparmor_parser" [ 28.629957] type=1400 audit(1340502641.180:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1105 comm="apparmor_parser" [ 28.630325] type=1400 audit(1340502641.180:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1105 comm="apparmor_parser" [ 28.630535] type=1400 audit(1340502641.180:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1105 comm="apparmor_parser" [ 28.645266] type=1400 audit(1340502641.196:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1104 comm="apparmor_parser" **[ 28.751922] ADDRCONF(NETDEV_UP): wlan0: link is not ready** [ 28.753653] tg3 0000:08:00.0: irq 49 for MSI/MSI-X **[ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.857034] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 28.871080] type=1400 audit(1340502641.420:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1108 comm="apparmor_parser" [ 28.871519] type=1400 audit(1340502641.420:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1108 comm="apparmor_parser" [ 28.874905] type=1400 audit(1340502641.424:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1113 comm="apparmor_parser" [ 28.875354] type=1400 audit(1340502641.424:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1113 comm="apparmor_parser" [ 30.477976] tg3 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex [ 30.477979] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX **[ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready** [ 31.110269] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X [ 31.110859] [fglrx] Firegl kernel thread PID: 1327 [ 31.111021] [fglrx] Firegl kernel thread PID: 1329 [ 31.111408] [fglrx] Firegl kernel thread PID: 1330 [ 31.111543] [fglrx] IRQ 50 Enabled [ 31.712938] [fglrx] Gart USWC size:1224 M. [ 31.712941] [fglrx] Gart cacheable size:486 M. [ 31.712945] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 31.712948] [fglrx] Reserved FB block: Unshared offset:fc2b000, size:3d5000 [ 31.712950] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [ 41.312020] eth0: no IPv6 routers present As you can see I get multiple instances of [ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready and then finally it becomes read and I get the message [ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready. I searched askubuntun, ubuntuforum, and the web but couldn't find a solution. Any help would be very much appreciated. Here is the bootchart

    Read the article

  • How do I get a rt2800usb wireless device working?

    - by Jii
    My brand new desktop running 13.04 has endless problems with wireless. Dozens of others are flooding forums with reports of the same problems. It worked fine for a few days, then there were a few days where it started having problems sometimes and working sometimes. Now it never works at all. I have 5+ devices all able to connect without any trouble at all, including iPhone, Android phone, 3DS, multiple game consoles, a laptop running windows 7, and even a second desktop machine running Ubuntu 12.04 sitting right behind the 13.04 machine. All other devices have full wireless bars displayed (strong signals). At any moment, one of the following is happening, and it changes randomly: Trying to connect forever, but never establishing a connection. Wireless icon constantly animating. Finds no wireless networks at all. (There are 12+ in range according to other devices.) Will not try to connect to the network. If I use the icon to connect, it will display "Disconnected" within a few seconds. Will continuously ask for the network password. Typing it in correctly does not help. Wireless is working fine. This happens sometimes. It can work for days at a time, or only 10 mins at a time. Various things that usually do nothing but sometimes fix the problem: Reboot. This has the best chance of helping, but it usually takes 5+ times. Disable/re-enable Wi-Fi using the wireless icon. Disable/re-enable Networking using the wireless icon. Use the icon to try and connect to a network (if found). Use the icon to open Edit Connections and delete my connection info, causing it to be recreated (once it's actually found again). Various things that seem to make no difference: Changing between using Linux headers in grub at bootup, between 3.10.0, 3.9.0, or 3.8.0. Move the wireless router very close to the desktop. Running sudo rfkill unblock all (I dunno what this is supposed to do.) I've used Ubuntu for 6 years and I've never had a problem with networking. Now I'm spending all my time reading through endless problem reports and trying all the answers. None of them have helped. I am doing this instead of getting work done, which is defeating the whole purpose of using Ubuntu. It's heartbreaking to be honest. In the current state of "no networks are showing up", here are outputs from the random things that other people are usually asked to run: lspic 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d4) 00:1c.2 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1) 01:00.1 Audio device: NVIDIA Corporation GF119 HDMI Audio Controller (rev a1) 03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03) lsmod Module Size Used by e100 41119 0 nls_iso8859_1 12713 1 parport_pc 28284 0 ppdev 17106 0 bnep 18258 2 rfcomm 47863 12 binfmt_misc 17540 1 arc4 12573 2 rt2800usb 27201 0 rt2x00usb 20857 1 rt2800usb rt2800lib 68029 1 rt2800usb rt2x00lib 55764 3 rt2x00usb,rt2800lib,rt2800usb coretemp 13596 0 mac80211 656164 3 rt2x00lib,rt2x00usb,rt2800lib kvm_intel 138733 0 kvm 452835 1 kvm_intel cfg80211 547224 2 mac80211,rt2x00lib crc_ccitt 12707 1 rt2800lib ghash_clmulni_intel 13259 0 aesni_intel 55449 0 usb_storage 61749 1 aes_x86_64 17131 1 aesni_intel joydev 17613 0 xts 12922 1 aesni_intel nouveau 1001310 3 snd_hda_codec_hdmi 37407 1 lrw 13294 1 aesni_intel gf128mul 14951 2 lrw,xts mxm_wmi 13021 1 nouveau snd_hda_codec_realtek 46511 1 ablk_helper 13597 1 aesni_intel wmi 19256 2 mxm_wmi,nouveau snd_hda_intel 44397 5 ttm 88251 1 nouveau drm_kms_helper 49082 1 nouveau drm 295908 5 ttm,drm_kms_helper,nouveau snd_hda_codec 190010 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel cryptd 20501 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hwdep 13613 1 snd_hda_codec snd_pcm 102477 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel btusb 18291 0 snd_page_alloc 18798 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 i2c_algo_bit 13564 1 nouveau snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30417 1 snd_seq_midi snd_seq 61930 2 snd_seq_midi_event,snd_seq_midi bluetooth 251354 22 bnep,btusb,rfcomm snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi lpc_ich 17060 0 snd_timer 29989 2 snd_pcm,snd_seq mei 46588 0 snd 69533 20 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device psmouse 97838 0 microcode 22923 0 soundcore 12680 1 snd video 19467 1 nouveau mac_hid 13253 0 serio_raw 13215 0 lp 17799 0 parport 46562 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 47346 0 hid 101248 2 hid_generic,usbhid ahci 30063 3 libahci 32088 1 ahci e1000e 207005 0 ptp 18668 1 e1000e pps_core 14080 1 ptp sudo lshw -c network 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d4) 00:1c.2 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1) 01:00.1 Audio device: NVIDIA Corporation GF119 HDMI Audio Controller (rev a1) 03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03) sudo iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on sudo iwlist scan eth0 Interface doesn't support scanning. lo Interface doesn't support scanning. wlan0 No scan results NOTE: This dmesg was done after a reboot where the network manager was continuously displaying the "disconnected" message over and over. So it must have been trying to connect at this time. My network was displayed in the list of options, as the only option despite other devices picking up 12+ access points. The router channel is set to auto. dmesg | tail -30 [ 187.418446] wlan0: associated [ 190.405601] wlan0: disassociated from 00:14:d1:a8:c3:44 (Reason: 15) [ 190.443312] cfg80211: Calling CRDA to update world regulatory domain [ 190.443431] wlan0: deauthenticating from 00:14:d1:a8:c3:44 by local choice (reason=3) [ 190.451635] cfg80211: World regulatory domain updated: [ 190.451643] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 190.451648] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 190.451652] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 190.451656] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 190.451659] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 190.451662] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 191.824451] wlan0: authenticate with 00:14:d1:a8:c3:44 [ 191.850608] wlan0: send auth to 00:14:d1:a8:c3:44 (try 1/3) [ 191.884604] wlan0: send auth to 00:14:d1:a8:c3:44 (try 2/3) [ 191.886309] wlan0: authenticated [ 191.886579] rt2800usb 3-5.3:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 191.886588] rt2800usb 3-5.3:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 191.889556] wlan0: associate with 00:14:d1:a8:c3:44 (try 1/3) [ 192.001493] wlan0: associate with 00:14:d1:a8:c3:44 (try 2/3) [ 192.040274] wlan0: RX AssocResp from 00:14:d1:a8:c3:44 (capab=0x431 status=0 aid=3) [ 192.044235] wlan0: associated [ 193.948188] wlan0: deauthenticating from 00:14:d1:a8:c3:44 by local choice (reason=3) [ 193.981501] cfg80211: Calling CRDA to update world regulatory domain [ 193.984080] cfg80211: World regulatory domain updated: [ 193.984082] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 193.984084] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 193.984085] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 193.984085] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 193.984086] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 193.984087] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) The router uses MAC filtering, and security is WPA PSK with cipher as auto. So, any ideas? Or is the solution just to not use 13.04 unless you have a wired connection? (I don't have this option.) If so, please just tell me straight. I survived 9.04 Jaunty, and I can survive 13.04 Raring. Update #1 Results from trying Wild Man's first answer: jii@conan:~$ echo "options rt2800usb nohwcrypt=y" | sudo tee /etc/modprobe.d/rt2800usb.conf options rt2800usb nohwcrypt=y jii@conan:~$ sudo modprobe -rfv rt2800usb rmmod rt2800usb rmmod rt2800lib rmmod crc_ccitt rmmod rt2x00usb rmmod rt2x00lib rmmod mac80211 rmmod cfg80211 jii@conan:~$ sudo modprobe -v rt2800usb insmod /lib/modules/3.10.0-031000-generic/kernel/lib/crc-ccitt.ko insmod /lib/modules/3.10.0-031000-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.10.0-031000-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2800lib.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2x00usb.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2800usb.ko nohwcrypt=y I tried: gksudo gedit /etc/pm/power.d/wireless but I didn't have the package. It said to install gksu. I tried that, but of course, not having Internet, I didn't get the package. So instead I did: sudo gedit /etc/pm/power.d/wireless Which created the file. Here is the body: #!/bin/sh /sbin/iwconfig wlan0 power off I then rebooted. No change. I tried adding exit 0 to the bottom of the wireless file, and rebooted. No change. Please note that this is a desktop machine. I'm assuming power management is primarily for laptops, but the iwconfig does state that power management is on, so who knows. The recommended router changes I did not do, since the current router settings are (I think) required for some of the older devices I have, and because the current settings work on all my modern devices including Ubuntu 12.04 and Windows 7. I do appreciate the advice though, and I'll look into it when I have time. Anything else to try? Update #2 I booted into Ubuntu 12.04.3 from a dvd, and the same problems exist. I have a separate old desktop machine with 12.04 installed that has no wireless problems at all. So obviously the problem is wireless hardware compatibility in both 12.04.03 LTS and 13.04. Update #3 The same problems exist even when using a wired connection. I plugged an ethernet cable directly to the router and the network manager added an "Auto Ethernet" entry, but it cannot establish a connection to it. So the problem is not specific to wireless. Meanwhile, I purchased a Trendnet N300 wireless USB adapter, TEW-664UB. I plugged it in, but I have no idea how to get Ubuntu to try and use it. Can anyone tell me how? Can I download a package on another computer and copy the .deb over to do an install, etc? I'm installing windows 7 to double check that the internet connection works there and it's not just some magically faulty hardware. Thanks for your help.

    Read the article

< Previous Page | 68 69 70 71 72 73 74 75  | Next Page >