Search Results

Search found 8656 results on 347 pages for 'boot to vhd'.

Page 72/347 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Booting Ubuntu 13.10 form USB on server with no OS (Dell PowerEdge T110)

  - by user35581

  I have a Dell PowerEdge T110 (Xeon 1220v2) server with no OS. From my mac, I was able to save the Ubuntu 13.10 for server iso (x86) and used UNetbootin to save the iso to a USB stick (2GB). I was hoping to boot the server from USB, and all seemed to be going well, BIOS even detected my USB drive when I plugged it in, but for some reason I'm getting a "Missing operating system" error. I checked the USB drive and it appears that UNetbootin put the correct files on it form a cursory glance (although I'm not entirely sure what I should be looking for). Should I be able to boot a server with no OS from a UNetbootin created Ubuntu 13.10 USB? And if so, why might BIOS not find the right files? I had read that there is a USB Emulation setting in BIOS, but I haven't been able to find this in the menus. My understanding is that by default, this is set to on. I might try wiping the USB stick and running UNetbootin again. The USB is formatted to MS-DOS FAT16 (should it be formatted some other way?).

  Read the article

• How to run multiple distros using lvm

  - by Mark

  I've seen quite a few posts around about running multiple distros but not sure they apply to using LVM (and without Windows). I'm using a machine that's about 3 years old. Setup: Intel Core i7 2.8GHz 8GB Ram 1TB SATA HDD At this point, I'd like to install 12.10 and Mint 14, leaving the option open to install additional distros down the road. I could be way off, but I'm thinking about creating at least 2 primary /boot partitions (1 for 12.10 and 1 for Mint) and another partition for LVM leaving room for additional /boot partitions. Then creating a VG and separate LVs for Ubuntu 12.10 and Linux Mint 14. I understand I can share partitions between the 2 installs, but I'm only using this for testing and I have tons of space to play with. LVM seemed logical considering I may want to install and test additional distros. I guess I could share the /swap partition across the board without problems, right? I'm unclear about GRUB2. How do I handle the bootloader situation? Install 12.10 and get it running then make changes to grub.cfg after installing Mint? And do I not install GRUB for Mint or do I install it in a different location? Any guidance would be appreciated.

  Read the article

• Cannot Create Bootable USB Drive from .iso file

  - by tarabyte

  I've tried formatting the flash drive as FAT as well as Mac OS journaled through diskutility but still cannot successfully create a bootable drive. I'm following the directions here exactly: http://www.ubuntu.com/download/help/create-a-usb-stick-on-mac-osx Environment: Macbook Pro trying to create a bootable flash drive for a Macbook Pro. 8GB flash drive. Tested ubuntu-12.04.1 as well as ubuntu 12.20 .iso 64-bit downloads. Nothing to repair in disk utility for this hard drive. Every time I finish step 8 of the tutorial I get "file system not recognized" with the options to "initialize" meaning to reformat my drive, "ignore" or "eject." When I try to re-inspect the flash drive in disk utility after plugging it back in I see that it has some error when I try to verify it but the "repair" button is disabled. I just want to boot to ubuntu when my mac first starts up. Oh the pain. http://lifehacker.com/5934942/how-to-dual-boot-linux-on-your-mac-and-take-back-your-powerhouse-apple-hardware "linux is free insomuch as your time is worthless" - old wise man

  Read the article

• Why does Ubuntu 13.10 not detect my Win7 partition?

  - by goutham

  I'm trying to install Ubuntu 13.10 alongside Windows 7 on my DELL INSPIRON 14z 5423 laptop and I'm new to all of this. I'm using the Ubuntu 13.10 64-bit ISO burned onto a CD. The first time I tried to install it, Ubuntu said it did not detect any other OS, which meant I only had 4 options: Erase disk and install Ubuntu (I don't want to do this) Encrypt new Ubuntu. Use LVM. Something else. If I choose the Something else option, it brings me to the partition menu and says that I have 1 disk with free space of (500Gb), but that's not true because I have Windows 7. I restarted the laptop several times and booted the CD again and I got exactly the same as I did previously. How do fix this problem and install Ubuntu alongside Windows 7? After executing "sudo fdisk -l" command in terminal ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 314574847 157184000 7 HPFS/NTFS/exFAT /dev/sda3 314574848 629147647 157286400 7 HPFS/NTFS/exFAT /dev/sda4 629147648 976771071 173811712 7 HPFS/NTFS/exFAT After removing one partition I executed command once again ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 629145599 314469376 7 HPFS/NTFS/exFAT /dev/sda3 629147648 976771071 173811712 7 HPFS/NTFS/exFAT

  Read the article

• Ubuntu does not recognize my built-in monitor.

  - by B3tturTh3nU

  I've recently discovered of a boot problem Ubuntu has with my laptop. I have successfully installed Ubuntu on two other computers, and I've never experienced this problem. What happens is, after the live boot CD loads, the screen goes completely blank. Although, I suspected that there was no problem booting, so I loaded with BIOS only, which worked perfectly fine. Of course, not being very proficient with this, I have no idea what needs to be done to fix the problem. I have switchable graphics cards(the ATI Mobility Radeon HD 5650, and some low-end Intel card), and an Intel i5 quad core processor. I was booting with the Ubuntu 10.10 64 bit desktop distribution. If there's any more information you need from me, please let me know. EDIT: I was able to look into this a bit more, thanks to one of the comments provided, and I have some new information. Ubuntu does seem to be able to recognize both of my graphics cards. The problem I found was that, in the Xorg.0 log, it mentions that there were "no screens found." I'm using a notebook, so the screen is built in. Does anyone know of a way to get Ubuntu to recognize the monitor?

  Read the article

• What Does Installing Ubuntu "Alongside" Windows Entail?

  - by Soft Skeleton

  I recently posted a question about an error I was receiving trying to access Ubuntu from the boot menu. I am using Windows 7 and Ubuntu 12.x (I THINK because I haven't accessed it in over a year due to being unable to run an important program for one of my classes on Ubuntu). On another laptop, I partitioned the hard drive and installed Windows and Ubuntu on the partitions. On this laptop, I simply installed Ubuntu from Windows, picking the option "alongside Windows", and didn't partition my hard drive manually. I was under the impression "alongside" entailed that Ubuntu would partition my hard drive, and that if I were to return my Windows partition to factory settings it would not affect the Ubuntu partition. However, given my current problem, I am wondering if I was mistaken in this assumption? When installing Ubuntu from Windows, selecting "alongside" Windows as the option from the Ubuntu installer, does that simply install Ubuntu within the Windows partition and thus returning it to factory settings would wipe out anything I had on the Ubuntu OS as well? Ubuntu is still in the boot menu as an option, but when I try to access it it says the drive is "corrupt" and wubi is mentioned in the error. I additionally tried to download a program ran from Windows to investigate partitions and there were no sign of my Ubuntu partition viewable from Windows. Is it possible Windows just can't see it? Any insight, corrections or answers is appreciated.

  Read the article

• "Missing Operating System" after installing Ubuntu 12.04 from a CD on a Macbook Pro

  - by Pierre

  I followed this guide to install Ubuntu 12.04 on my Macbook Pro 8,2 (late 2011): https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation I used a CD. I synced the partition table on rEFIt, and it went fine. I do have an icon to boot on Linux, but when I launch it, after a few seconds I have "Missing Operating System" displayed, and that's all... How can I fix that? The only thing I see is, in the guide, it is mentioned this: On the last dialog of the installer, be sure to click the “Advanced” button and choose to install the boot loader (grub) to your root Ubuntu partition, for example /dev/sda3. This will be the only partition with the EXT4 file system. In Ubuntu 12.04 installation process, there is not such an option, but there is a dropdown menu to select where the grub bootloader should be installed. It was /dev/sda by default, but I selected my root Ubuntu partition (in my case, /dev/sda5). I got a warning message (but actually, it was the same warning message even when I selected /dev/sda), and I continued the installation... Thanks in advance for your help!

  Read the article

• wrong kernel running after install

  - by ticktockhouse

  I have installed Ubuntu 14.04 from unetbootin. When it reboots after the install, uname -r says: 3.5.0-17-generic ..this means that no modules have loaded for the kernel that is actually installed (3.13.0-32-generic). Does anyone know why this kernel should be installed via the install process? Is it an artifact of using Unetbootin? Booting into the Unetbootin image gives the correct kernel, and thus the modules load. Knowing why is one thing, but I'm not sure how to remedy it now. Because no modules are loaded, I can't connect to the network or connect a USB drive. I've tried update-grub, which seems to find the correct kernel, but doesn't seem to tell the system to boot from it. I've also tried selecting the kernel at boot time using the "Advanced Options for Ubuntu", and the 3.13.x kernel is the only one listed. Selecting this lead to the 3.5.x kernel stubbornly loading.. I'm a fairly accomplished sysadmin, but this one has me flummoxed :) Can anyone help?

  Read the article

• Help with dual booting Windows 8.1 Professional and Ubuntu 13.10

  - by user1292548

  I recently installed a clean version of Windows 8.1 Professional on my Lenovo Y500 (with Samsung 256GB 840 Pro SSD). I have Windows all set up and running normally. I am trying to dual boot Windows 8.1 and Ubuntu 13.10, but the installation procedure don't allow me to either "Install alongside..." or shows my SSD partitions correctly when I chose the "Something Else" option. I have created a 25GB partition of free space in the Windows disk manager, but on the installation screen on Ubuntu, it shows the whole drive as a free space. I have tried installing with a burned .ISO disk and a bootable USB, the results are the same for both. Windows Disk Management screen: http://imageshack.us/a/img855/9504/59zu.jpg The Ubuntu installation screen: http://imageshack.us/a/img62/2712/9g6i.jpg I've ran into this problem before when trying to dual boot Ubuntu and Windows 7 Professional a month ago. But I gave up and never resolved the issue. --EDIT-- I tried what Eero Aaltonen suggested, and this is my result: ubuntu@ubuntu:~$ sudo parted /dev/sda print Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA Samsung SSD 840 (scsi) Disk /dev/sda: 256GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags ubuntu@ubuntu:~$

  Read the article

• Installing 13.04 on an EFI partition - Share with Windows 8?

  - by mengelkoch

  Information I've found here suggests that for my system, I need to install 13.04 into an EFI-type partition, since it needs to boot as UEFI. I also understand it is advisable to have only ONE EFI partition on the disk; I've read here that it is OK for Ubuntu and Windows to share the same partition (please confirm). When I try to install into the existing EFI drive, I get the message "No root file system is defined. Please correct from partitioning menu." Do I change the EFI boot partition to another type? Doesn't that defeat the purpose? If I change it to Ext4 Journaling File System, I am given the opportunity to define the '/' Mount point. I haven't proceeded beyond this point for fear I am going to destroy Windows 8 by altering this partition. BTW, I created three partitions in Windows before installing, per the helpful response to my previous question. But if I try to install into the partition I created for Ubuntu, I get the "No root file system..." error again.

  Read the article

• Dual booted Windows 7 freezes after login screen

  - by Cathal

  First-time Linux user, using a Packard Bell Easy Note TS laptop. My problem arose after I dual boot installed Ubuntu 12.04 on Windows 7 via WUBI. I backed up all my data, and reinstalled Windows from factory settings on the recovery partition. When I first tried to install Ubuntu I mistakenly closed the lid at the start of the installation, stopping it. After that I rebooted, and my second installation attempt went without a hitch. Ubuntu works perfectly, the data on the partitions seem to be fine. My problem is I can't log back in to Windows 7. After selecting it in GRUB, and then in the Windows 7/ WUBI choice on boot, it loads up perfectly til the user log in screen. After the password is inputted, it stalls on the "Welcome" busy screen. This happens in Safe mode as well. Startup repair can't find a problem and neither can CHKDSK. System restore and Last known good config have no effect either. If anyone could help me out, I'd be real grateful. edit in response to the question below, since I don't know how to comment: Windows was installed first and its partitions are the first on the list. Should I move the windows partitions to after the Linux ones on the disk? Thanks for your help.

  Read the article

• "Misaligned partition" - Should I do repartition (how?)

  - by RndmUbuntuAmateur

  Tried to install Ubuntu 12.04 from USB-stick alongside the existing Win7 OS 64bit, and now I'm not sure if install was completely successful: Disk Utility tool claims that the Extended partition (which contains Ubuntu partition and Swap) is "misaligned" and recommends repartition. What should I do, and if should I do this repartition, how to do it (especially if I would like not to lose the data on Win7 partition)? Background info: A considerably new Thinkpad laptop (UEFI BIOS, if that matters). Before install there were already a "SYSTEM_DRV" partition, the main Windows partition and a Lenovo recovery partition (all NTFS). Now the table looks like this: SYSTEM_DRV (sda1), Windows (sda2), Extended (sda4) (which contains Linux (sda5; ext4) and Swap (sda6)) and Recovery (sda3). Disk Utility Tool gives a message as follows when I select Ext: "The partition is misaligned by 1024 bytes. This may result in very poor performance. Repartitioning is suggested." There were couple of problems during the install, which I describe below, in the case they happen to be relevant. Installer claimed that it recognized existing OS'es fine, so I checked the corresponding option during the install. Next, when it asked me how to allocate the disk space, the first weird thing happened: the installer give me a graphical "slide" allocate disk space for pre-existing Win7 OS and new Ubuntu... but it did not inform me which partition would be for Ubuntu and which for Windows. ..well, I decided to go with the setting installer proposed. (not sure if this is relevant, but I guess I'd better mention it anyway - the previous partition tools have been more self-explanatory...) After the install (which reported no errors), GRUB/Ubuntu refused to boot. Luckily this problem was quite straightforwardly resolved with live-Ubuntu-USB and Boot-Repair ("Recommended repair" worked just fine). After all this hassle I decided to check the partition table "just to be sure"- and the disk utility gives the warning message I described.

  Read the article

• Ubuntu 12.04 still slow at mounting internal filesystem

  - by Matthew Goson

  I'm using Toshiba laptop with this configuration: - CPU: Core i5, 2.4GHz - RAM: 4GB - Graphics card: Intel - Hard disk: 500GB SATA I installed Ubuntu 12.04 64bit and got the same issue with this guy Very slow boot due to mounting filesytem, I tried all suggestions there but the slow boot issue still here. Here's a part of my dmesg: [ 2.041015] usbhid: USB HID core driver [ 2.101378] usb 1-1.6: new full-speed USB device number 5 using ehci_hcd [ 2.137980] atl1c 0000:04:00.0: version 1.0.1.0-NAPI [ 2.779080] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 22.822597] udevd[381]: starting version 175 [ 22.837954] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.850837] lp: driver loaded but no devices found [ 23.003822] Adding 7079096k swap on /dev/sda7. Priority:-1 extents:1 across:7079096k [ 23.407915] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 23.408153] mei 0000:00:16.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 23.408160] mei 0000:00:16.0: setting latency timer to 64 [ 23.408211] mei 0000:00:16.0: irq 44 for MSI/MSI-X [ 23.433196] [drm] Initialized drm 1.1.0 20060810 Additional information: my sda1 is a primary NTFS partition, sda2 is a primary ext4 partition which I installed Ubuntu onto. Other partitions are inside an extended partition.

  Read the article

• Windows Recovery from Grub messed up my computer?

  - by Hudson Worden

  Ok so I'm a noob when it comes to Operating Systems and I think I really messed up this time. So I have a laptop that dual boots Windows 7 and Linux Mint 11. I was trying to boot into Windows 7 but it would just have a black screen with a blinking cursor. So I turned off my computer and tried again. Still a black screen with a cursor. So I thought "well it must be broken somehow and I remembered seeing something like 'Windows Recovery' from the boot menu so I should try it." So when I turned on my computer a third time I selected 'Windows Recovery' (Something like that I can't remember exactly what it was called). After I had selected that I got a white Windows window that said in big red letters "ERROR". I turned off my computer again a turned it back on expecting the Grub menu to reappear. I was wrong. Instead I am greeted with error: no such partition grub rescue. Then I put in a live CD for ubuntu 11.04 and tried looking at my partitions using the disk manager. Looking at my partitions I notice that there isn't a Linux partition anymore and in its place is a unallocated space partition yet the Linux Swap partition is still there. My windows partition is still fine and I can access the files in it. If you understand what has happened, is there anyway I can get my files back? I don't care about reinstalling the OS again. I just want those files that are in the Linux Mint partition.

  Read the article

• LiveCD not booting/can't install Ubuntu 11.04

  - by user20318

  So, i got a new laptop somedays ago and as usualy, i went formated it to install Ubuntu. Download 11.04 and burned it on my pendrive using my old laptop (running 11.04). When i tryed to boot from the LiveUSB on my new laptop, it just showed me some weird graphics and if i select any option (can't see what im selecting), it gives me a black screen and that is all. Then i tryed to boot with this LiveUSB on my old laptop, and it worked just fine ._. Burned a CD with Ubuntu 11.04 (64bits) and the problem continue. Then i tought it could be my CD Driver, since the laptop is new and all... burned a Windows 7 64 bits DVD and it worked just fine. Also, if i check the CD/Pendrive inside Windows Seven, all the files there are ok. Anyone have any idea of what can be? I found lots of questions about this, but none of them had the weird menus i'm getting ._. oohh... i also get a "prefix is not set" before the weird menu appears :S My sis specs: Intel Core i5 2400 Intel HD 3000 4gb DDR3 If anyone can help, i will be really greatfull ._.

  Read the article

• Installation on SSD with Windows preinstalled

  - by ebbot

  I bought a laptop with this fancy SSD drive, fancy new UEFI aso. I figured at first Windows out Ubuntu in but after doing 3 DoA on 3 laptops in one day I realized that maybe keeping Windows could come in handy. So dual boot it is. And this is what I've got: Disk 1 - 500 Gb HD 300 Mb Windoze only says "Healthy" don't know what it's for. 600 Mb "Healthy (EFI partition)" 186.30 Gb NTFS "OS (C:)" "Healthy (Boot, Page File, Crash Dump, Primary Partition)" 258.45 Gb NTFS "Data (D:)" "Healthy" 20.00 Gb "Healthy (Recovery Partition)" Disk 2 - 24 Gb SSD 4.00 Gb "Healthy (OEM Partition)" 18.36 Gb "Healthy (Primary Partition)" So I'm not sure what the first partition on each drive does (the 300 Gb on the HD and the OEM Partition on the SSD. Nor do I know what Data (D:). I think the 2nd partition on the SSD is for some speedup of Windoze. I'm debating if I should shrink the OS (C:) drive to around 120 GB or so. Clear the Data (D:) and also use the whole SSD for Ubuntu. That would leave me 24 Gb for e.g. / on the SSD and some 320 Gb on the HD for /home and swap. Is this a reasonable setup? Do I need to configure fstab for the SSD differently to a HD?

  Read the article

• SSD and HDD have window 7 recovery partition. Can I delete one to make room for ubuntu?

  - by Brian Ecker

  I'm trying to install ubuntu right now, and I've run into a problem. I have Windows 7 installed on my SSD, and I want to install ubuntu on my HDD, but I already have three partitions on my HDD. The partitions are two Recovery Partitions and one data partition. What I don't understand is why my data drive(the HDD) has recovery partitions for Windows 7? The same recovery partitions(or atleast I think they are the same. Same sizes, same names, same order) are on the SSD with the Windows 7 install. Can I safely delete the recovery partitions on the HDD? My other option, I think, is to put the boot partition for ubuntu on the SSD where I only have three partitions. Then I can put the other three logical partitions for ubuntu in an extended partition on the HDD. Can I do that, put the boot partition on one drive and the other partitions on another? Here is a picture of the partitions and I have circled the one I would like to delete to make room. http://imgur.com/XOpJQ

  Read the article

• Is full partition encryption the only sure way to make Ubuntu safe from external access?

  - by fred.bear

  (By "external access", I mean eg. via a Live CD, or another OS on the same dual-boot machine) A friend wants to try Ubuntu. He's fed up with Vista grinding to a crawl (the kids? :), so he likes the "potential" security offered by Ubuntu, but because the computer will be multi-booting Ubuntu (primary) and 2 Vistas (one for him, if he ever needs it again, and the other one for the kids to screw up (again). However, he is concerned about any non-Ubuntu access to the Ubuntu partitions (and also to his Vista partition)... I believe TrueCrypt will do the job for his Vista, but I'd like to know what the best encryption system for Ubuntu is... If TrueCrypt works for Ubuntu, it may be the best option for him, as it would be the same look and feel for both. Ubuntu will be installed with 3 partitions; 1) root 2) home 3) swap.. Will Ubuntu's boot loader clash with TrueCrypt's encrypted partition? PS.. Is encryption a suitable solution?

  Read the article

• Can't install Ubuntu 12.04 64-bit on a dual-drive MacBook Pro 8,2

  - by kizdp

  Good afternoon, this is the first time I participate here as I'm new to Linux. I've been trying to solve the following problem for over a week without any sign of success so I hope there's a much more knowledgeable person here that can give me a solution. I have an early 2011 MacBook Pro (8,2) with Mac OS X running in a SSD. Then, instead of the Optical bay, I have a HDD in where I would like to install Ubuntu to run it natively. I've tried to do the normal installation process, with or without rEFIt, but it seems the problem resides on the communication between the device containing the Ubuntu .iso file and the laptop. It doesn't allow communication with the boot CD or USB drive. It usually says: “Loading bootlogo...” after I click on the “boot from CD, Linux Icon”. After trying several things, I would like to know if I could install Ubuntu on the HDD as an external HDD (using a friend's Window's system) and then simply put it back into my laptop so as to become an Internal HDD again. I guess, I would have to reinstall many drivers and so on, but would this approach work? Thanks in advance and sorry for this huge block of text

  Read the article

• Step by Step: Remove/Sideline Preinstalled Windows 8, Install Ubuntu

  - by user207562

  I want Ubuntu as my primary/only operating system. Computer came with presumptive Pre-Installed Windows 8.(touch screen) Help. New Dell Inspiron 15r. Cannot install Ubuntu 12.04-03 or LTS. I need/request step by step instructions to remove Windows 8 or sideline Windows 8. (ie) BIOS settings I need to know: What to have; What settings; When to apply; Boot manager settings. UEFI. Etc. This should be easy, but I am mired in the Herpes that is Microsoft. I end up having a presumed dual boot that will not access Ubuntu. (ie) Step 1: Turn on computer. Step 2: F# to change ... to ... at Dell prompt... I want to use Ubuntu as my primary operating system or my only operating system.

  Read the article

• Just installed Ubuntu 12.04. When booting, all I get is a black screen with cursor

  - by user66378

  Installation appears to go fine. After rebooting, I get my motherboard loading screens, but when it comes time for Ubuntu to boot, I just get a black screen with a blinking white underscore in the top-left - same as I got when waiting for the install CD to load, except it lasts forever. The only keypress it seems to recognize is ctrl+alt+del, which reboots. Letters don't register, function keys w/ or w/o modifiers do nothing. I've installed Ubuntu 12.04 twice and got the same error. The first time, I installed it as the only OS, and had it take up the whole disk. The second time, I installed Windows 7 first, then Ubuntu by specifying custom partitions. After this install, it would boot straight to Windows without showing grub. I used EasyBCD to add the Ubuntu installation to grub, and this got grub to show, and let me select it, but it led back to the same error described up top. I've had Linux Mint 11 and 12 installed on this PC, but was unable to get previous versions of Ubuntu to install (always had errors while installing, not after). Hardware: Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 ASUS SABERTOOTH P67 (REV 3.0) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard EVGA 01G-P3-1371-TR GeForce GTX 460 (Fermi) CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Western Digital RE4 WD5003ABYX 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive

  Read the article

• Three Ubuntu 12.04 + Xfce problems

  - by user1708495

  sorry to bother you, but I wanted to set up a minimal Ubuntu 12.04 with minimal Xfce and probably due to my unawareness of several important things, not everything is working properly. -Sometimes when I shutdown I get error message from iwlwifi: It starts with a time out error about sending a power table and after several other errors it says "On demand firmware reload and "Unable to initialize device". And the shutdown stops there so I can only use hard shutdown. -Also when I boot, I often boot to a black screen, but pressing ctrl+alt+f1 gets me to the login prompt (I do not use a login manager). But then I sometimes cannot type. Seems probably more like a X server problem. When it works I only see the Plymouth splash for a very short time or sometimes not at all. -And the last problem is the most annoying one: Frequently Xfce freezes completely. I think ctrl+alt+f1 works sometimes, but other times I also have to use hard shutdown. When it freezes the cpu fan gets louder. I've been using Xbuntu for a while before, but with "real" Linux I am more a beginner, so I hope you forgive my questions Thanks

  Read the article

• PXE boot FreeBSD iso from pxelinux server

  - by Andrew

  I'm using FOG as a TFTP / PXE server and would like to be able to boot a FreeBSD LiveCD (specifically pfSense, but it could be any LiveCD, really); I've found HOWTOs for booting a "netboot" BSD but they all seem to use a BSD server. So: Is it possible to PXE boot BSD from a Linux server? Is it possible to PXE boot a BSD LiveCD? Is it possible to PXE boot a Linux LiveCD? My main motivation is to be able to boot small LiveCD images (e.g. < 100MB) that I may only use once and don't want to burn a physical CD for.

  Read the article

• Can not boot CentOS VM using VirtIO in KVM

  - by Jake

  I converted qcow2 image to raw and changed I/O bus to VirtIO for a VM. now I can't boot that VM. I Installed VirtIO driver with following command: mkinitrd --with virtio_pci --with virtio_blk -f /boot/initrd-$(uname -r).img $(uname -r) and these are related kernel modules: virtio_balloon 11329 0 virtio_blk 11593 3 virtio_pci 11845 0 virtio_ring 8513 1 virtio_pci virtio 9541 3 virtio_balloon,virtio_blk,virtio_pci and this is what happens during boot-up. I also changed /boot/grub/device.map from "(hd0) /dev/sda" to "(hd0) /dev/vda" but problem still exists. any ideas how to fix this ? This is my default option to boot: title CentOS (2.6.18-308.13.1.el5) root (hd0,0) kernel /vmlinuz-2.6.18-308.13.1.el5 ro root=/dev/VolGroup00/LogVol00 initrd /initrd-2.6.18-308.13.1.el5.img

  Read the article

• Freebsd Box hangs on boot loader

  - by user19039

  I have a freebsd box that seems to not want to boot past the boot loader. It wont go past the initial boot loader phase and just lists the version number for the boot loader(btx loader). It hangs there. I am not a fluent freebsd admin and decent at command line, however I can tell clearly it wont get past and boot past the disk. Loaded up rescue cd, mounted the drive. Couldnt get fsck going without seg faulting How do i get this fixed? I have a live cd.... just curious which route to take.

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >