Search Results

Search found 2503 results on 101 pages for 'danger cat'.

Page 72/101 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

  • My Package Version Number Appears Greater Yet apt-get Doesn't Select It

    - by nutznboltz
    Backstory: It was determined that when using lxc container VMs the Nagios nrpe shutdown script when run on the host of the containers would kill the nrpe processes inside the containers. This was remediated by changing the script to use pidfiles instead of searching the process table for the nrpe process. Regrettably start-stop-daemon is a C program that resulted from translating a Perl script and it shows. There are far too many global varibles in start-stop-daemon.c and although there are some nice blocks of comments there are far to few comments that explain the intent behind variable names such as "schedule" (the string "schedule" appears in many contexts.) The manual page for start-stop-daemon strongly suggests that unless you use the "--retry" option the start-stop-daemon program may return before the process it sent a signal to actually calls exit() and terminates, however it doesn't actually state this in plain English. The obtuseness of start-stop-daemon is most likely the reason that the "fixed" version of the script includes a dubious comment indicating that sometimes the pid file has not been removed. I can easily see why someone would not understand that he left the --retry option missing. This bug also causes failures when the script is given the "restart" option; the nrpe daemon will shutdown but not start up again. Did I mention that since applying the update our nrpe servers started crashing over and over? Repairing this is why I am doing this work. I have been working on remediating the fix. You can see my current work in this PPA. Actual Question: The upstream version number of nagios-nrpe-server in lucid-updates is 2.12-4ubuntu1.10.04.1 My PPA uses this version number 2.12-4ubuntu1.10.04.1.1~ppa1~lucid1 I check the rules here and use this test program and I am lead to believe that the version number I use in my PPA is greater than the one in lucid-updates yet when I ran: sudo add-apt-repository ppa:nutznboltz/nrpe-unbreak-lp-600941 sudo apt-get update sudo aptitiude dist-upgrade The replacement package was not installed. I was able to install it using sudo aptitude install nagios-nrpe-server=2.12-4ubuntu1.10.04.1.1~ppa1~lucid1 Can anyone explain this behavior? Why didn't my version number appear greater to "aptitude dist-upgrade"? Thanks $ cat /etc/apt/preferences Package: * Pin: release a=lucid-backports Pin-Priority: 400 Package: * Pin: release a=lucid-security Pin-Priority: 990 Package: * Pin: release a=lucid-updates Pin-Priority: 900 Package: * Pin: release a=lucid-proposed Pin-Priority: 400 $ ls /etc/apt/preferences.d/ $ Should not make any difference as a PPA cannot be in any of those pockets. I went ahead and bumped the version number in the PPA to 2.12-4ubuntu1.10.04.2~ppa1~lucid1. I'll see if that makes a difference. I do notice that lintian complains: W: nagios-nrpe-server: debian-revision-not-well-formed 2.12-4ubuntu1.10.04.2~ppa1~lucid1

    Read the article

  • Installed Ubuntu 14.04LTS

    - by user291729
    On my laptop which came pre-installed with Windows 8.1. Felt I needed to see the competition for myself to establish which was a better OS. So I followed the channels to dual boot. All seemed fine and I accessed Ubuntu with no issues after selecting this from the menu to select the OS. I should add that the boot method was changed to legacy. However, since using Ubuntu, I no longer have the ability to select the OS. The laptop simply logs straight into Ubuntu. I therefore attempted to access the recovery options, only it appears the Windows 8 bootloader has somehow been corrupted as I am now told to use the Windows 8 recovery disc (which, as this was pre-installed - I do not have). Left with no other alternative, I have scoured these forums without success, and so I am hoping someone in the know (or who has experienced similar) can help. I have tried boot repair again without success. On rebooting I am only presented with a basic splash screen asking me to select Ubuntu, Memtest, Windows 8 Recovery or Windows 8 Bootloader (The bootloaders again require I insert the disc). I have tried Code: cat /boot/grub/grub.cfg df -h sudo fdisk -l cat /proc/partitions # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=800x600 load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=20 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=20 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-29-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { menuentry 'Ubuntu, with Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-29-generic ...' linux /boot/vmlinuz-3.13.0-29-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-29-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro vga=789 quiet quiet splash $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-d2f10f36-e3bb-4d83-a9b8-5d456fc454ad' { recordfail load_video insmod gzio insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi echo 'Loading Linux 3.13.0-24-generic ...' linux /boot/vmlinuz-3.13.0-24-generic root=UUID=d2f10f36-e3bb-4d83-a9b8-5d456fc454ad ro recovery nomodeset vga=789 quiet echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.13.0-24-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_gpt insmod ext2 set root='hd0,gpt9' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 d2f10f36-e3bb-4d83-a9b8-5d456fc454ad else search --no-floppy --fs-uuid --set=root d2f10f36-e3bb-4d83-a9b8-5d456fc454ad fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-7A6A69D66A698FA5' { insmod part_gpt insmod ntfs set root='hd0,gpt2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 7A6A69D66A698FA5 else search --no-floppy --fs-uuid --set=root 7A6A69D66A698FA5 fi drivemap -s (hd0) ${root} chainloader +1 } menuentry 'Windows 8 (loader) (on /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-8C88-80F7' { insmod part_gpt insmod fat set root='hd0,gpt3' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 8C88-80F7 else search --no-floppy --fs-uuid --set=root 8C88-80F7 fi drivemap -s (hd0) ${root} chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ ^C john@john-SVE1713Y1EB:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda9 84G 7.1G 73G 9% / none 4.0K 0 4.0K 0% /sys/fs/cgroup udev 3.9G 4.0K 3.9G 1% /dev tmpfs 794M 1.4M 793M 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 80K 3.9G 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sdc1 7.5G 2.2G 5.4G 29% /media/john/DYLANMUSIC /dev/sr0 964M 964M 0 100% /media/john/Ubuntu 14.04 LTS amd64 /dev/sdb1 1.9T 892G 972G 48% /media/john/Storage Main WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x4e2ccf75 Device Boot Start End Blocks Id System /dev/sda1 1 1953525167 976762583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdc: 8011 MB, 8011120640 bytes 41 heads, 41 sectors/track, 9307 cylinders, total 15646720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 15646719 7819328 b W95 FAT32 Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc7d968ff Device Boot Start End Blocks Id System /dev/sdb1 64 3907029119 1953514528 7 HPFS/NTFS/exFAT major minor #blocks name 8 0 976762584 sda 8 1 266240 sda1 8 2 1509376 sda2 8 3 266240 sda3 8 4 131072 sda4 8 5 841012780 sda5 8 6 358400 sda6 8 7 35376128 sda7 8 8 1024 sda8 8 9 89501696 sda9 8 10 8337408 sda10 11 0 987136 sr0 8 32 7823360 sdc 8 33 7819328 sdc1 8 16 1953514584 sdb 8 17 1953514528 sdb1 I am no expert on this and I'm at a loss as how to correct this without having to re-format everything and reinstall Windows 8. However, if I'm to try using Ubuntu again then there is the risk this problem may come back. Again, I did not do anything manually - the installer did everything (with the exception of changing the boot to Legacy to allow the booting of another bootloader). LiveCD works but doesn't give me the options that I've seen here and as mentioned earlier, only boot recovery only gives me the options as mentioned earlier. Also this fails to load via USB (possibly because HDD comes before USB in the boot order?). Being used to a Windows environment, the Ubuntu (and Linux) environment is a dive at a less than comfortable depth at present (but one I fully intend to get to grips with - especially the commands being more common via Terminal). I very much appreciate the help with this guys.

    Read the article

  • Unable to sync time using `ntpdate`, error: "no server suitable for synchronization found"

    - by William Ting
    My ntp.conf file: user@pc[0][07:37:40]:/etc$ cat /etc/ntp.conf idriftfile /var/lib/ntp/ntp.drift server 0.pool.ntp.org server 1.pool.ntp.org server 2.pool.ntp.org server pool.ntp.org Command output: user@pc[0][07:37:24]:/etc$ sudo ntpdate -dv pool.ntp.org 18 Jun 07:37:35 ntpdate[10737]: ntpdate [email protected] Tue Apr 19 07:15:05 UTC 2011 (1) Looking for host pool.ntp.org and service ntp host found : conquest.kjsl.com transmit(198.137.202.16) transmit(216.45.57.38) transmit(64.6.144.6) transmit(198.137.202.16) transmit(216.45.57.38) transmit(64.6.144.6) transmit(198.137.202.16) transmit(216.45.57.38) transmit(64.6.144.6) transmit(198.137.202.16) transmit(216.45.57.38) transmit(64.6.144.6) transmit(198.137.202.16) transmit(216.45.57.38) transmit(64.6.144.6) 198.137.202.16: Server dropped: no data 216.45.57.38: Server dropped: no data 64.6.144.6: Server dropped: no data server 198.137.202.16, port 123 stratum 0, precision 0, leap 00, trust 000 refid [198.137.202.16], delay 0.00000, dispersion 64.00000 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 originate timestamp: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 transmit timestamp: d1a71a93.1f16c1e3 Sat, Jun 18 2011 7:37:39.121 filter delay: 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 filter offset: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 delay 0.00000, dispersion 64.00000 offset 0.000000 server 216.45.57.38, port 123 stratum 0, precision 0, leap 00, trust 000 refid [216.45.57.38], delay 0.00000, dispersion 64.00000 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 originate timestamp: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 transmit timestamp: d1a71a93.524a05dd Sat, Jun 18 2011 7:37:39.321 filter delay: 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 filter offset: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 delay 0.00000, dispersion 64.00000 offset 0.000000 server 64.6.144.6, port 123 stratum 0, precision 0, leap 00, trust 000 refid [64.6.144.6], delay 0.00000, dispersion 64.00000 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 originate timestamp: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 transmit timestamp: d1a71a93.524a05dd Sat, Jun 18 2011 7:37:39.321 filter delay: 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 filter offset: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 delay 0.00000, dispersion 64.00000 offset 0.000000 server 64.6.144.6, port 123 stratum 0, precision 0, leap 00, trust 000 refid [64.6.144.6], delay 0.00000, dispersion 64.00000 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 originate timestamp: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 transmit timestamp: d1a71a93.857c6fbd Sat, Jun 18 2011 7:37:39.521 filter delay: 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 filter offset: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 delay 0.00000, dispersion 64.00000 offset 0.000000 18 Jun 07:37:40 ntpdate[10737]: no server suitable for synchronization found

    Read the article

  • Did I lost my RAID again?

    - by BarsMonster
    Hi! A little history: 2 years ago I was really excited to find out that mdadm is so powerful so it even can reshape arrays so you can start with a smaller array and the grow it as you need. I've bought 3x1Tb drives and made RAID-5. It was fine for a year. Then I bought 2x more, and tried to reshape to RAID-6 out of 5 drives, and due to some mess with superblock versions, lost all content. Had to rebuild it from scratch, but 2Tb of data were gone. Yesterday I bought 2 more drives, and this time I had everything: properly built array, UPS. I've disabled write intent map, added 2 new drives as a spare and run a command to grow array to 7-disk. It started working, but speed was ridiculously slow, ~100kb/sec. AFter processing first 37Mb at such an amasing speed, one of old HDDs fails. I properly shutdown PC and disconnected failed drive. After bootup it appeared it recreated intent map as it was still in mdadm config, so I removed it from config and rebooted again. Now all I see is that all mdadm processes deadlocks, and don't do anything. PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1937 root 20 0 12992 608 444 D 0 0.1 0:00.00 mdadm 2283 root 20 0 12992 852 704 D 0 0.1 0:00.01 mdadm 2287 root 20 0 0 0 0 D 0 0.0 0:00.01 md0_reshape 2288 root 18 -2 12992 820 676 D 0 0.1 0:00.01 mdadm And all I see in mdstat is: $ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 sdb1[1] sdg1[4] sdf1[7] sde1[6] sdd1[0] sdc1[5] 2929683456 blocks super 1.2 level 6, 1024k chunk, algorithm 2 [7/6] [UU_UUUU] [>....................] reshape = 0.0% (37888/976561152) finish=567604147.2min speed=0K/sec I've already tried mdadm 2.6.7, 3.1.4 and 3.2 - nothing helps. Did I lost my data again? Any suggestions how can I make it work? OS is Ubuntu Server 10.04.2... PS. Needless to say that data is unaccessible - I cannot mount /dev/md0 as save the most valuable data. You can see my disappointment - the very specific thing I was excited about failed twice taking 5Tb of my data with it.

    Read the article

  • Hostapd - WLAN as AP

    - by BBK
    I'm trying to start hostapd but without success. I'm using Headless Ubuntu 11.10 oneiric 3.0.0-16-server x86_64. WLAN driver is rt2800usb and my wireless nic card TP-Link TL-WN727N supports AP mode as shows below: us0# ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:27:19:be:cd:b6 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) us0# lsusb Bus 003 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter us0# lshw -C network *-network:3 description: Wireless interface physical id: 4 bus info: usb@3:2 logical name: wlan0 serial: 00:27:19:be:cd:b6 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.0.0-16-server firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn us0# hostapd /etc/hostapd/hostapd.conf Configuration file: /etc/hostapd/hostapd.conf Could not read interface wlan0 # The int flags: No such device nl80211 driver initialization failed. ELOOP: remaining socket: sock=4 eloop_data=0xd3e4a0 user_data=0xd3ecc0 handler=0x433880 ELOOP: remaining socket: sock=6 eloop_data=0xd411f0 user_data=(nil) handler=0x43cc10 us0# cat /etc/hostapd/hostapd.conf ssid=Home interface=wlan0 # The interface name of the card #driver=rt2800usb driver=nl80211 macaddr_acl=0 ieee80211n=1 channel=1 hw_mode=g auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=88888888 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP us0# iw list Wiphy phy0 Band 1: Capabilities: 0x172 HT20/HT40 Static SM Power Save RX Greenfield RX HT20 SGI RX HT40 SGI RX STBC 1-stream Max AMSDU length: 7935 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 2 usec (0x04) HT RX MCS rate indexes supported: 0-7, 32 TX unequal modulation not supported HT TX Max spatial streams: 1 HT TX MCS rate indexes supported may differ Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) (passive scanning, no IBSS) * 2472 MHz [13] (20.0 dBm) (passive scanning, no IBSS) * 2484 MHz [14] (20.0 dBm) (passive scanning, no IBSS) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * Unknown command (68) * Unknown command (55) * Unknown command (57) * Unknown command (59) * Unknown command (67) * set_wiphy_netns * Unknown command (65) * Unknown command (66) * connect * disconnect The question is: Why the hostapd not starting?

    Read the article

  • Do I have to worry about "error: superfluous RAID member"?

    - by 0xC0000022L
    When running update-grub on the newly installed Ubuntu 12.04 with an older software RAID (md), I get: error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). Generating grub.cfg ... error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). Found linux image: /boot/vmlinuz-3.2.0-24-generic Found initrd image: /boot/initrd.img-3.2.0-24-generic error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). Found linux image: /boot/vmlinuz-3.2.0-23-generic Found initrd image: /boot/initrd.img-3.2.0-23-generic error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). Found memtest86+ image: /boot/memtest86+.bin error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). error: superfluous RAID member (5 found). Found Debian GNU/Linux (5.0.9) on /dev/sdb1 Found Debian GNU/Linux (5.0.9) on /dev/sdc1 done I would be less worried if the message would say warning: ..., but since it says error: ... I'm wondering what the problem is. # cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md2 : active raid1 sdc1[1] sdb1[0] 48829440 blocks [2/2] [UU] md3 : active raid1 sdc2[1] sdb2[0] 263739008 blocks [2/2] [UU] md1 : active raid5 sdg1[3] sdf1[2] sde1[1] sdh1[0] sdi1[4] sdd1[5](S) 1250274304 blocks level 5, 64k chunk, algorithm 2 [5/5] [UUUUU] unused devices: <none> Do I have to worry or is this harmless? btw: disregard the mentioning of Debian 5.0.9, that was the previously installed system and is going to be overwritten. It's on /dev/md2 actually.

    Read the article

  • Mixed Solaris 10 and 11 versions in logical domains on the same server

    - by jsavit
    One question that comes up frequently is whether you can mix Solaris 10 and Solaris 11 in different logical domains under Oracle VM Server for SPARC. The answer is yes depending only on the system software requirements for the underlying hardware platform. Different versions of Solaris 10 and 11 can exist side-by-side on the same server and can act as control, service, I/O or guest domains subject only to the minimum software levels documented in the System Requirements section of the Oracle VM Server for SPARC Release Notes. Here's an example just taken from a running system. First, here's the control domain, which is running Solaris 10. I've highlighted a guest running Solaris 11. # uname -a SunOS atl-sewr-24 5.10 Generic_147440-01 sun4v sparc SUNW,SPARC-Enterprise-T5220 # ldm -V Logical Domains Manager (v 2.1) Hypervisor control protocol v 1.7 Using Hypervisor MD v 1.3 System PROM: Hypervisor v. 1.10.0 @(#)Hypervisor 1.10.0 2011/04/27 16:19\015 # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 1.6% 120d 17h atl-sewr-pool-148 active -n---- 5001 8 2G 0.1% 119d 21h atl-sewr-pool-152 active -n---- 5000 8 4G 0.2% 112d 19h atl-sewr-pool-154 active -n---- 5002 8 2G 0.1% 120d 15h atl-sewr-pool-155 active -n---- 5003 16 2G 0.0% 26d 14h 30m This system is running Oracle VM Server 2.1 with a Solaris 10 control domain. Hmm, I should update this machine to 2.2 when I get a few free moments. Upgrading is very straightforward. Here's a display logging into the highlighted guest: Last login: Mon May 21 10:18:16 2012 from dhcp-adc-twvpn- Oracle Corporation SunOS 5.11 11.0 November 2011 sewr@atl-sewr-pool-152:~$ uname -a SunOS atl-sewr-pool-152 5.11 11.0 sun4v sparc SUNW,SPARC-Enterprise-T5220 sewr@atl-sewr-pool-152:~$ cat /etc/release Oracle Solaris 11 11/11 SPARC Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved. Assembled 18 October 2011 sewr@atl-sewr-pool-152:~$ sudo virtinfo -ct Password: Domain role: LDoms guest Control domain: atl-sewr-24 sewr@atl-sewr-pool-152:~$ That's running the GA version of Solaris 11, so I probably should update that some time too. Note the use of the virtinfo -ct command that lets the guest get information about the hosting environment. Summary You can mix and match versions of Solaris in logical domains. All the different combinations work: Solaris 10 and/or Solaris 11 control and service domains with Solaris 10 and/or Solaris 11 guests. Mixing different guest OS levels on the same server is one of the traditional reasons for using virtual machines in the first place since virtual machines were invented some 40 years ago, used to run production and test systems in parallel while upgrading OS levels. This can easily be done with Oracle VM Server for SPARC (Logical Domains).

    Read the article

  • Agile Testing Days 2012 – Day 3 – Agile or agile?

    - by Chris George
    Another early start for my last Lean Coffee of the conference, and again it was not wasted. We had some really interesting discussions around how to determine what test automation is useful, if agile is not faster, why do it? and a rather existential discussion on whether unicorns exist! First keynote of the day was entitled “Fast Feedback Teams” by Ola Ellnestam. Again this relates nicely to the releasing faster talk on day 2, and something that we are looking at and some teams are actively trying. Introducing the notion of feedback, Ola describes a game he wrote for his eldest child. It was a simple game where every time he clicked a button, it displayed “You’ve Won!”. He then changed it to be a Win-Lose-Win-Lose pattern and watched the feedback from his son who then twigged the pattern and got his younger brother to play, alternating turns… genius! (must do that with my children). The idea behind this was that you need that feedback loop to learn and progress. If you are not getting the feedback you need to close that loop. An interesting point Ola made was to solve problems BEFORE writing software. It may be that you don’t have to write anything at all, perhaps it’s a communication/training issue? Perhaps the problem can be solved another way. Writing software, although it’s the business we are in, is expensive, and this should be taken into account. He again mentions frequent releases, and how they should be made as soon as stuff is ready to be released, don’t leave stuff on the shelf cause it’s not earning you anything, money or data. I totally agree with this and it’s something that we will be aiming for moving forwards. “Exceptions, Assumptions and Ambiguity: Finding the truth behind the story” by David Evans started off very promising by making references to ‘Grim up North’ referring to the north of England. Not sure it was appreciated by most of the audience, but it made me laugh! David explained how there are always risks associated with exceptions, giving the example of a one-way road near where he lives, with an exception sign giving rights to coaches to go the wrong way. Therefore you could merrily swing around the corner of the one way road straight into a coach! David showed the danger in making assumptions with lyrical quotes from Lola by The Kinks “I’m glad I’m a man, and so is Lola” and with a picture of a toilet flush that needed instructions to operate the full and half flush. With this particular flush, you pulled the handle all the way down to half flush, and half way down to full flush! hmmm, a bit of a crappy user experience methinks! Then through a clever use of a passage from the Jabberwocky, David then went onto show how mis-translation/ambiguity is the can completely distort the original meaning of something, and this is a real enemy of software development. This was all helping to demonstrate that the term Story is often heavily overloaded in the Agile world, and should really be stripped back to what it is really for, stating a business problem, and offering a technical solution. Therefore a story could be worded as “In order to {make some improvement}, we will { do something}”. The first ‘in order to’ statement is stakeholder neutral, and states the problem through requesting an improvement to the software/process etc. The second part of the story is the verb, the doing bit. So to achieve the ‘improvement’ which is not currently true, we will do something to make this true in the future. My PM is very interested in this, and he’s observed some of the problems of overloading stories so I’m hoping between us we can use some of David’s suggestions to help clarify our stories better. The second keynote of the day (and our last) proved to be the most entertaining and exhausting of the conference for me. “The ongoing evolution of testing in agile development” by Scott Barber. I’ve never had the pleasure of seeing Scott before… OMG I would love to have even half of the energy he has! What struck me during this presentation was Scott’s explanation of how testing has become the role/job that it is (largely) today, and how this has led to the need for ‘methodologies’ to make dev and test work! The argument that we should be trying to converge the roles again is a very valid one, and one that a couple of the teams at work are actively doing with great results. Making developers as responsible for quality as testers is something that has been lost over the years, but something that we are now striving to achieve. The idea that we (testers) should be testing experts/specialists, not testing ‘union members’, supports this idea so the entire team works on all aspects of a feature/product, with the ‘specialists’ taking the lead and advising/coaching the others. This leads to better propagation of information around the team, a greater holistic understanding of the project and it allows the team to continue functioning if some of it’s members are off sick, for example. Feeling somewhat drained from Scott’s keynote (but at the same time excited that alot of the points he raised supported actions we are taking at work), I headed into my last presentation for Agile Testing Days 2012 before having to make my way to Tegel to catch the flight home. “Thinking and working agile in an unbending world” with Pete Walen was a talk I was not going to miss! Having spoken to Pete several times during the past few days, I was looking forward to hearing what he was going to say, and I was not disappointed. Pete started off by trying to separate the definitions of ‘Agile’ as in the methodology, and ‘agile’ as in the adjective by pronouncing them the ‘english’ and ‘american’ ways. So Agile pronounced (Ajyle) and agile pronounced (ajul). There was much confusion around what the hell he was talking about, although I thought it was quite clear. Agile – Software development methodology agile – Marked by ready ability to move with quick easy grace; Having a quick resourceful and adaptable character. Anyway, that aside (although it provided a few laughs during the presentation), the point was that many teams that claim to be ‘Agile’ but are not, in fact, ‘agile’ by nature. Implementing ‘Agile’ methodologies that are so prescriptive actually goes against the very nature of Agile development where a team should anticipate, adapt and explore. Pete made a valid point that very few companies intentionally put up roadblocks to impede work, so if work is being blocked/delayed, why? This is where being agile as a team pays off because the team can inspect what’s going on, explore options and adapt their processes. It is through experimentation (and that means trying and failing as well as trying and succeeding) that a team will improve and grow leading to focussing on what really needs to be done to achieve X. So, that was it, the last talk of our conference. I was gutted that we had to miss the closing keynote from Matt Heusser, as Matt was another person I had spoken too a few times during the conference, but the flight would not wait, and just as well we left when we did because the traffic was a nightmare! My Takeaway Triple from Day 3: Release often and release small – don’t leave stuff on the shelf Keep the meaning of the word ‘agile’ in mind when working in ‘Agile Look at testing as more of a skill than a role  

    Read the article

  • SSIS and StreamInsight Working Together.

    I have been thinking a lot recently about what it would be like to have StreamInsight and SSIS working together.  Well the CAT team have produced a paper on some of our options here. Here are some of my thoughts. There is of course a slight mismatch in their types of usage.  StreamInsight is an Event Stream processing engine capable of operating on new data in the sub second timeframe.  The engine allows you to do real time analytics and take decisions on events that have potentially only just happened.  SSIS on the other hand is a batch processing engine.  In general I do not like having to invoke the same package more than once every 90 seconds or so as it can start to get expensive.  Usually when doing batch processing we have an hour or longer of grace before we have to move data from A –> B. StreamInsight operates on streams of data.  Before anyone mentions it yes I know StreamInsight is equally adept at using the IEnumerable interface, but I would argue live streaming and real-time analytics is a primary goal of the product.  SSIS does not have an “Always On” button I do not like the idea of embedding StreamInsight inside SSIS using a transform particularly.  It means StreamInsight becomes a batch processing engine because it can only operate when the SSIS package is running and SSIS is in charge of when that happens. If I am to have StreamInsight within SSIS then I prefer to have StreamInsight on the adapters.  This way you can force the adapters to stay open and introduce events into your Pipeline.   SSIS has a much richer set of transforms out of the box than StreamInsight.  Although “Always On” was not a design goal of SSIS I have used it like this and it works just fine. SSIS being called from within StreamInsight, now that excites me.  see below   For a while now I have been thinking what it would be like to decouple the Data Flow task from the SSIS package and expose it as something with which you can interact.  Anything can instantiate this version of a DFT as it would expose one or more  input interfaces and one or more output interfaces.  I can imagine that this would be a big hit when moving to “The Cloud” as well.  I could see the Data Flow task maybe being hosted in Azure Appfabric or some such layer. StreamInsight would be able to take advantage of this as well.   I am interested to see where this goes and will be pressing for more meat around the subject when I visit Redmond soon.

    Read the article

  • Visiting the Fire Station in Coromandel

    Hm, I just tried to remember how we actually came up with this cool idea... but it's already too blurred and it doesn't really matter after all. Anyway, if I remember correctly (IIRC), it happened during one of the Linux meetups at Mugg & Bean, Bagatelle where Ajay and I brought our children along and we had a brief conversation about how cool it would be to check out one of the fire stations here in Mauritius. We both thought that it would be a great experience and adventure for the little ones. An idea takes shape And there we go, down the usual routine these... having an idea, checking out the options and discussing who's doing what. Except this time, it was all up to Ajay, and he did a fantastic job. End of August, he told me that he got in touch with one of his friends which actually works as a fire fighter at the station in Coromandel and that there could be an option to come and visit them (soon). A couple of days later - Confirmed! Be there, and in time... What time? Anyway, doesn't really matter... Everything was settled and arranged. I asked the kids on Friday afternoon if they might be interested to see the fire engines and what a fire fighter is doing. Of course, they were all in! Getting up early on Sunday morning isn't really a regular exercise for all of us but everything went smooth and after a short breakfast it was time to leave. Where are we going? Are we there yet? Now, we are in Bambous. Why do you go this way? The kids were so much into it. Absolutely amazing to see their excitement. Are we there yet? Well, we went through the sugar cane fields towards Chebel and then down into the industrial zone at Coromandel. Honestly, I had a clue where the fire station is located but having Google Maps in reach that shouldn't be a problem in case that we might get lost. But my worries were washed away when our children guided us... "There! Over there are the fire engines! We have to turn left, dad." - No comment, the kids were right! As we were there a little bit too early, we parked the car and the kids started to explore the area and outskirts of the fire station. Some minutes later, as if we had placed an order a unit of two cars had to go out for an alarm and the kids could witness them leaving as closely as possible. Sirens on and wow!!! Ladder truck L32 - MAN truck with Rosenbauer built-up and equipment by Metz Taking the tour Ajay arrived shortly after that and guided us finally inside the station to meet with his pal. The three guys were absolutely well-prepared and showed us around in the hall, explaining that there two units out at the moment. But the ladder truck (with max. 32m expandable height) was still around we all got a great insight into the technique and equipment on the vehicle. It was amazing to see all three kids listening to Mambo as give some figures about the truck and how the fire fighters are actually it. The children and 'our' fire fighters of the day had great fun with the various fire engines Absolutely fantastic that the children were allowed to experience this - we had so much fun! Ajay's son brought two of his toy fire engines along, shared them with ours, and they all played very well together. As a parent it was really amazing to see them at such an ease. Enough theory Shortly afterwards the ladder truck was moved outside, got stabilised and ready to go for 'real-life' exercising. With the additional equipment of safety helmets, security belts and so on, we all got a first-hand impression about how it could be as a fire-fighter. Actually, I was totally amazed by the curiousity and excitement of my BWE. She was really into it and asked lots of interesting questions - in general but also technical. And while our fighters were busy with Ajay and family, I gave her some more details and explanations about the truck, the expandable ladder, the safety cage at the top and other equipment available. Safety first! No exceptions and always be prepared for the worst case... Also, the equipped has been checked prior to excuse - This is your life saver... Hooked up and ready to go... ...of course not too high. This is just a demonstration - and 32 meters above ground isn't for everyone. Well, after that it was me that had the asking looks on me, and I finally revealed to the local fire fighters that I was in the auxiliary fire brigade, more precisely in the hazard department, for more than 10 years. So not a professional fire fighter but at least a passionate and educated one as them. Inside the station Our fire fighters really took their time to explain their daily job to kids, provided them access to operation seat on the ladder truck and how the truck cabin is actually equipped with the different radios and so on. It was really a great time. Later on we had a brief tour through the building itself, and again all of our questions were answered. We had great fun and started to joke about bits and pieces. For me it was also very interesting to see the comparison between the fire station here in Mauritius and the ones I have been to back in Germany. Amazing to see them completely captivated in the play - the children had lots of fun! Also, that there are currently ten fire stations all over the island, plus two additional but private ones at the airport and at the harbour. The newest one is actually down in Black River on the west coast because the time from Quatre Bornes takes too long to have any chance of an effective alarm at all. IMHO, a very good decision as time is the most important factor in getting fire incidents under control. After all it was great experience for all of us, especially for the children to see and understand that their toy trucks are only copies of the real thing and that the job of a (professional) fire fighter is very important in our society. Don't forget that those guys run into the danger zone while you're trying to get away from it as much as possible. Another unit just came back from a grass fire - and shortly after they went out again. No time to rest, too much to do! Mauritian Fire Fighters now and (maybe) in the future... Thank you! It was an honour to be around! Thank you to Ajay for organising and arranging this Sunday morning event, and of course of Big Thank You to the three guys that took some time off to have us at the Fire Station in Coromandel and guide us through their daily job! And remember to call 115 in case of emergencies!

    Read the article

  • What are the default mount settings for mount / fstab?

    - by John Craick
    What are the default mounting options for a non root partition ? The man entry for mount says ... defaults - use default options: rw, suid, dev, exec, auto, nouser, and async. ... so that might be what we expect to see. But, unless I'm missing something, that's not what happens. I have an ext3 partition labelled "NewHome20G" which is seen as /dev/sdc6 by the system. This we can see from ... root@john-pc1204:~# blkid | grep NewHome20G /dev/sdc6: LABEL="NewHome20G" UUID="d024bad5-906c-46c0-b7d4-812daf2c9628" TYPE="ext3" I have an entry in fstab as follows ... root@john-pc1204:~# cat /etc/fstab | grep NewHome LABEL=NewHome20G /media/NewHome20G ext3 rw,nosuid,nodev,exec,users 0 2 Note the option settings that are specified in that fstab line. Now I look at how the partition is actually mounted after boot up ... root@john-pc1204:~# mount -l | grep sdc6 /dev/sdc6 on /media/NewHome20G type ext3 (rw,noexec,nosuid,nodev) [NewHome20G] ... so, when the filesystem gets mounted the exec & users options I specified seem to have been ignored. Just to be sure, I unmount sdc6, remount it and look at the mount options again ... root@john-pc1204:~# umount /dev/sdc6 root@john-pc1204:~# mount /dev/sdc6 root@john-pc1204:~# mount -l | grep sdc6 /dev/sdc6 on /media/NewHome20G type ext3 (rw,noexec,nosuid,nodev) [NewHome20G] .... same result Now I unmount the partition again, remount it specifying the exec option and look at the result ... root@john-pc1204:~# umount /dev/sdc6 root@john-pc1204:~# mount /dev/sdc6 -o exec root@john-pc1204:~# mount -l | grep sdc6 /dev/sdc6 on /media/NewHome20G type ext3 (rw,nosuid,nodev) [NewHome20G] ... and here the exec option has finally taken effect and the noexec setting has vanished. Just for interest, I re-mount the partition with the defaults option root@john-pc1204:~# umount /dev/sdc6 root@john-pc1204:~# mount /dev/sdc6 -o defaults root@john-pc1204:~# mount -l | grep sdc6 /dev/sdc6 on /media/NewHome20G type ext3 (rw,noexec,nosuid,nodev) [NewHome20G] The noexec is back, so it looks very like rw,noexec,nosuid,nodev are the default options which is NOT what man says. Why does this matter ? I have a folder full of useful scripts stored on a data disk. Because that disk is mounted noexec those scripts won't run, even though they have all been set with chmod 777. I can work round this in several ways but it's disappointing that the man entry seems to be wrong. Have I missed something obvious here or have the default options in Ubuntu changed from what they were a few versions ago ?

    Read the article

  • Cannot get Virtualbox to install properly on Ubuntu 12.04

    - by lopac1029
    I cannot get Virtualbox to install properly on my 12.04. I first went with a manual install for the .deb from the old builds section of the Virtualbox page. That .deb opened up the Software Center and installed. Then I got the error coming up of VT-x/AMD-V hardware acceleration is not available on your system. Your 64-bit guest will fail to detect a 64-bit CPU and will not be able to boot. which I can only assume was due to my Ubuntu version being 32-bit (System Details - Overview - OC type: 32-bit, right?) So I followed these instructions to remove the .deb manually, restarted my laptop, and then FOUND the actual Virtualbox install in the Software Center and installed from that (assuming it would give me the correct version I need for my system) So after all that (and then some), I'm still getting the same error when I connect to my new job's project in Virtualbox. Can anyone point me in the right direction of what to do here? This is the first time I've ever worked with Virtualbox, and no one at this company is using Ubuntu, so I'm on my own here. EDIT: Here is the direct info from running the 2 suggested commands Inspiron-1750-brick:~ $lscpu Architecture: i686 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 23 Stepping: 10 CPU MHz: 2100.000 BogoMIPS: 4189.45 L1d cache: 32K L1i cache: 32K L2 cache: 2048K Inspiron-1750-brick:~ $cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.80 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.45 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:

    Read the article

  • Ubuntu systematically losing wired connection

    - by Lukasz Baczynski
    I'm working on 11.10 for few recent days, everything was working perfect until today. Updated ubuntu (some certs were updates as far as i remember) and from this time, wired network stops working randomly and systematically. (All other pcs/macs work fine) From 192.168.0.9 icmp_seq=25 Destination Host Unreachable From 192.168.0.9 icmp_seq=26 Destination Host Unreachable From 192.168.0.9 icmp_seq=27 Destination Host Unreachable From 192.168.0.9 icmp_seq=28 Destination Host Unreachable From 192.168.0.9 icmp_seq=29 Destination Host Unreachable From 192.168.0.9 icmp_seq=30 Destination Host Unreachable From 192.168.0.9 icmp_seq=31 Destination Host Unreachable 64 bytes from 192.168.0.1: icmp_req=32 ttl=64 time=1003 ms 64 bytes from 192.168.0.1: icmp_req=33 ttl=64 time=0.496 ms 64 bytes from 192.168.0.1: icmp_req=34 ttl=64 time=0.576 ms 64 bytes from 192.168.0.1: icmp_req=35 ttl=64 time=0.522 ms 64 bytes from 192.168.0.1: icmp_req=36 ttl=64 time=0.624 ms 64 bytes from 192.168.0.1: icmp_req=37 ttl=64 time=0.625 ms 64 bytes from 192.168.0.1: icmp_req=38 ttl=64 time=0.555 ms It'll work for 20 seconds then it'll stop working for 10-30sec and so on. I've tried setting my router to give static IPs, it doesn't help. NOTHING has been changed since yesterday beside the package update... Here are other settings that may be useful: baka@baka-PC:~/Private/projects/wduk$ lspci -nnk | grep -iA2 net 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards [1043:8432] Kernel driver in use: r8169 baka@baka-PC:~/Private/projects/wduk$ ifconfig -a eth0 Link encap:Ethernet HWaddr **Removed MAC address** inet addr:192.168.0.9 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::ca60:ff:fe0a:85b2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6400 errors:0 dropped:6400 overruns:0 frame:6400 TX packets:7085 errors:0 dropped:107 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4191983 (4.1 MB) TX bytes:886881 (886.8 KB) Interrupt:72 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2522 errors:0 dropped:0 overruns:0 frame:0 TX packets:2522 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1070130 (1.0 MB) TX bytes:1070130 (1.0 MB) baka@baka-PC:~/Private/projects/wduk$ cat /etc/resolv.conf # Generated by NetworkManager nameserver 8.8.8.8 thanks for help

    Read the article

  • Master-slave vs. peer-to-peer archictecture: benefits and problems

    - by Ashok_Ora
    Normal 0 false false false EN-US X-NONE X-NONE Almost two decades ago, I was a member of a database development team that introduced adaptive locking. Locking, the most popular concurrency control technique in database systems, is pessimistic. Locking ensures that two or more conflicting operations on the same data item don’t “trample” on each other’s toes, resulting in data corruption. In a nutshell, here’s the issue we were trying to address. In everyday life, traffic lights serve the same purpose. They ensure that traffic flows smoothly and when everyone follows the rules, there are no accidents at intersections. As I mentioned earlier, the problem with typical locking protocols is that they are pessimistic. Regardless of whether there is another conflicting operation in the system or not, you have to hold a lock! Acquiring and releasing locks can be quite expensive, depending on how many objects the transaction touches. Every transaction has to pay this penalty. To use the earlier traffic light analogy, if you have ever waited at a red light in the middle of nowhere with no one on the road, wondering why you need to wait when there’s clearly no danger of a collision, you know what I mean. The adaptive locking scheme that we invented was able to minimize the number of locks that a transaction held, by detecting whether there were one or more transactions that needed conflicting eyou could get by without holding any lock at all. In many “well-behaved” workloads, there are few conflicts, so this optimization is a huge win. If, on the other hand, there are many concurrent, conflicting requests, the algorithm gracefully degrades to the “normal” behavior with minimal cost. We were able to reduce the number of lock requests per TPC-B transaction from 178 requests down to 2! Wow! This is a dramatic improvement in concurrency as well as transaction latency. The lesson from this exercise was that if you can identify the common scenario and optimize for that case so that only the uncommon scenarios are more expensive, you can make dramatic improvements in performance without sacrificing correctness. So how does this relate to the architecture and design of some of the modern NoSQL systems? NoSQL systems can be broadly classified as master-slave sharded, or peer-to-peer sharded systems. NoSQL systems with a peer-to-peer architecture have an interesting way of handling changes. Whenever an item is changed, the client (or an intermediary) propagates the changes synchronously or asynchronously to multiple copies (for availability) of the data. Since the change can be propagated asynchronously, during some interval in time, it will be the case that some copies have received the update, and others haven’t. What happens if someone tries to read the item during this interval? The client in a peer-to-peer system will fetch the same item from multiple copies and compare them to each other. If they’re all the same, then every copy that was queried has the same (and up-to-date) value of the data item, so all’s good. If not, then the system provides a mechanism to reconcile the discrepancy and to update stale copies. So what’s the problem with this? There are two major issues: First, IT’S HORRIBLY PESSIMISTIC because, in the common case, it is unlikely that the same data item will be updated and read from different locations at around the same time! For every read operation, you have to read from multiple copies. That’s a pretty expensive, especially if the data are stored in multiple geographically separate locations and network latencies are high. Second, if the copies are not all the same, the application has to reconcile the differences and propagate the correct value to the out-dated copies. This means that the application program has to handle discrepancies in the different versions of the data item and resolve the issue (which can further add to cost and operation latency). Resolving discrepancies is only one part of the problem. What if the same data item was updated independently on two different nodes (copies)? In that case, due to the asynchronous nature of change propagation, you might land up with different versions of the data item in different copies. In this case, the application program also has to resolve conflicts and then propagate the correct value to the copies that are out-dated or have incorrect versions. This can get really complicated. My hunch is that there are many peer-to-peer-based applications that don’t handle this correctly, and worse, don’t even know it. Imagine have 100s of millions of records in your database – how can you tell whether a particular data item is incorrect or out of date? And what price are you willing to pay for ensuring that the data can be trusted? Multiple network messages per read request? Discrepancy and conflict resolution logic in the application, and potentially, additional messages? All this overhead, when all you were trying to do was to read a data item. Wouldn’t it be simpler to avoid this problem in the first place? Master-slave architectures like the Oracle NoSQL Database handles this very elegantly. A change to a data item is always sent to the master copy. Consequently, the master copy always has the most current and authoritative version of the data item. The master is also responsible for propagating the change to the other copies (for availability and read scalability). Client drivers are aware of master copies and replicas, and client drivers are also aware of the “currency” of a replica. In other words, each NoSQL Database client knows how stale a replica is. This vastly simplifies the job of the application developer. If the application needs the most current version of the data item, the client driver will automatically route the request to the master copy. If the application is willing to tolerate some staleness of data (e.g. a version that is no more than 1 second out of date), the client can easily determine which replica (or set of replicas) can satisfy the request, and route the request to the most efficient copy. This results in a dramatic simplification in application logic and also minimizes network requests (the driver will only send the request to exactl the right replica, not many). So, back to my original point. A well designed and well architected system minimizes or eliminates unnecessary overhead and avoids pessimistic algorithms wherever possible in order to deliver a highly efficient and high performance system. If you’ve every programmed an Oracle NoSQL Database application, you’ll know the difference! /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

    Read the article

  • Ubuntu Server Cannot Route to the Internet

    - by ejes
    I've been having this problem for weeks now, and I can't seem to figure out the problem. My server can route the local network and serves it well, however it cannot access the internet. It can't be the router because everything else on this lan can route through the router. I've even switched the ethernet port. Any help would be appreciated. I've tried all the usual places, anyway, here are the configs: root@uhs:~# uname -a Linux uhs 3.0.0-16-generic-pae #28-Ubuntu SMP Fri Jan 27 19:24:01 UTC 2012 i686 i686 i386 GNU/Linux root@uhs:~# cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface # auto eth1 # iface eth1 inet dhcp auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 root@uhs:~# ping -c 4 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.334 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.339 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.324 ms 64 bytes from 192.168.0.1: icmp_req=4 ttl=64 time=0.339 ms --- 192.168.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.324/0.334/0.339/0.006 ms root@uhs:~# ping -c 4 209.85.145.103 PING 209.85.145.103 (209.85.145.103) 56(84) bytes of data. --- 209.85.145.103 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms root@uhs:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:0c:6e:a0:92:6e inet addr:192.168.0.3 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::20c:6eff:fea0:926e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13131114 errors:0 dropped:0 overruns:0 frame:0 TX packets:10540297 errors:0 dropped:0 overruns:5 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3077922794 (3.0 GB) TX bytes:3827489734 (3.8 GB) Interrupt:10 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7721 errors:0 dropped:0 overruns:0 frame:0 TX packets:7721 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:551950 (551.9 KB) TX bytes:551950 (551.9 KB) root@uhs:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 root@uhs:~# # PRETEND Traceroute root@uhs:~# for i in {1..30}; do ping -t $i -c 1 209.85.145.103; done | grep "Time to live exceeded" root@uhs:~#

    Read the article

  • I'd like to switch from 32-bit to 64-bit within same version

    - by Marty Fried
    I have a 32-bit installation of 11.10 on my 64-bit (4 GB) home AMD system. I have recently read up a bit on 64-bit version, and it seems that it would be a marginally better choice now for me. I have read about several methods to help reinstall all the various apps, using either dpkg's get-selections/set-selections and dselect in various ways, or using synaptic's save/get markings. The problem here is that I've read several variations, and I'm not sure which is best. I have enough disk space to do this with a brand new partition, so I'm not too worried about destroying anything, but I don't really want to make it my life's work, hence my appeal for expert tips. Since it's the same version, would it be safe to copy configuration files from the 32-bit system? I'd guess my home directory and /etc might be enough, and would save at least most of the time to reconfigure. But are there difference in configuration files in either of these directories for 32 vs 64 bits that might cause problems? After reinstalling to 64-bit, I can then continue along the 64 bit path for upgrades, but I thought it would be easier to switch the same version, than to try to reinstall apps and upgrade at the same time. Some methods I've seen suggested, among others: A. From Ubuntu forums On your old system (assuming it is still working), start up Synaptic and go: File->Save Markings and choose a file name along with a location (like a USB drive) that you can use when you have installed your new system). You need to check on the bottom: "Save full state, not only changes" This file contains a list of all your currently installed packages, and when you have installed and booted up your new system (and configured your repositories to the best for your location - as we all do, don't we?) then start up Synaptic and go: File-Read Markings and point it at your saved file, and after that has completed then select Apply to kick off the download & installation of all of those packages you had installed previously! B. From the same discussion: According to section 6.4.9 of the Debian Reference Manual, the following will save both the list of packages installed and their debconf configuration: # dpkg --get-selections "*" >myselections # or use \* # debconf-get-selections > debconfsel.txt and the following will reinstall and reconfigure them: # dselect update # debconf-set-selections < debconfsel.txt # dpkg --set-selections <myselections # apt-get -u dselect-upgrade # or dselect install C. A variation on the above I've seen a lot, this from stackoverflow: dpkg --get-selections > package_list then on the new install: cat package_list | sudo dpkg --set-selections && sudo apt-get dselect-upgrade I don't really understand B, or why it's slightly different than many others.

    Read the article

  • Advice for a distracted, unhappy, recently graduated programmer? [closed]

    - by Re-Invent
    I graduated 4 months ago. I had offers from a few good places to work at. At the same time I wanted to stick to building a small software business of my own, still have some ideas with good potential, some half done projects frozen in my github. But due to social pressures, I chose a job, the pay is great, but I am half-passionate about it. A small team of smart folks building useful product, working out contracts across the world. I've started finding it extremely boring. Boring to the extent that I skip 2-3 days a week together not doing work. Neither do I spend that time progressing any of my own projects. Yes, I feel stupid at the way I'm wasting time, but I don't understand exactly why is it happening. It's as if all the excitement has been drained. What can I do about it? Long version: School - I was in third standard. Only students, 6th grade had access to computer labs. I once peeked into the lab from the little door opening. No hard-disks, MS DOS on 5 1/2 inch floppies. I asked a senior student to play some sound in BASIC. He used PLAY to compose a tune. Boy! I was so excited, I was jumping from within. Back home, asked my brother to teach me some programming. We bought a book "MODERN All About GW-BASIC for Schools & Colleges". The book had everything, right from printing, to taking input, file i/o, game programming, machine level support, etc. I was in 6th standard, wrote my first game - a wheel of fortune, rotated the wheel by manipulating 16 color palette's definition. Got internet soon, got hooked to QuickBasic programming community. Made some more games "007 in Danger", "Car Crush 2" for submission to allbasiccode archives. I was extremely excited about all this. My interests now swayed into "hacking" (computer security). Taught myself some perl, found it annoying, learnt PHP and a bit of SQL. Also taught myself Visual Basic one of the winters and wrote a pacman clone with Direct X. By the time I was in 10th standard, I created some evil tools using visual basic, php and mysql and eventually landed myself into an unpaid side-job at a government facility, building evil tools for them. It was a dream come true for crackers of that time. And so was I, still very excited. Things changed soon, last two years of school were not so great as I was balancing preps for college, work at govt. and studies for school at same time. College - College was opposite of all I had wished it to be. I imagined it to be a place where I'd spend my 4 years building something awesome. It was rather an epitome of rote learning, attendance, rules, busy schedules, ban on personal laptops, hardly any hackers surrounding you and shit like that. We had to take permissions to even introduce some cultural/creative activities in our annual schedule. The labs won't be open on weekends because the lab employees had to have their leaves. Yes, a horrible place for someone like me. I still managed to pull out a project with a friend over 2 months. Showed it to people high in the academia hierarchy. They were immensely impressed, we proposed to allow personal computers for students. They made up half-assed reasons and didn't agree. We felt frustrated. And so on, I still managed to teach myself new languages, do new projects of my own, do an intern at the same govt. facility, start a small business for sometime, give a talk at a conference I'm passionate about, win game-dev and hacking contest at most respected colleges, solve good deal of programming contest problems, etc. At the same time I was not content with all these restrictions, great emphasis on rote learning, and sheer wastage of time due to college. I never felt I was overdoing, but now I feel I burnt myself out. During my last days at college, I did an intern at a bigco. While I spent my time building prototypes for certain LBS, the other interns around me, even a good friend, was just skipping time. I thought maybe, in a few weeks he would put in some serious efforts at work assigned to him, but all he did was to find creative ways to skip work, hide his face from manager, engage people in talks if they try to question his progress, etc. I tried a few time to get him on track, but it seems all he wanted was to "not to work hard at all and still reap the fruits". I don't know how others take such people, but I find their vicinity very very poisonous to one's own motivation and productivity. Over that, the place where I come from, HRs don't give much value to what have you done past 4 years. So towards the end of out intern, we all were offered work at the bigco, but the slacker, even after not writing more than 200 lines of code was made a much better offer. I felt enraged instantly - "Is this how the corp world treats someone who does fruitful, if not extra-ordinary work form them for past 6 months?". Yes, I did try to negotiate and debate. The bigcos seem blind due to departmentalization of responsibilities and many layers of management. I decided not to be in touch with any characters of that depressing play. Probably the busy time I had at college, ignoring friends, ignoring fun and squeezing every bit of free time for myself is also responsible. Probably this is what has drained all my willingness to work for anyone. I find my day job boring, at the same time I with to maintain it for financial reasons. I feel a bit burnt out, unsatisfied and at the same time an urge to quit working for someone else and start finishing my frozen side-projects (which may be profitable). Though I haven't got much to support myself with food, office, internet bills, etc in savings. I still have my day job, but I don't find it very interesting, even though the pay is higher than the slacker, I don't find money to be a great motivator here. I keep comparing myself to my past version. I wonder how to get rid of this and reboot myself back to the way I was in school days - excited about it, tinkering, building, learning new things daily, and NOT BORED?

    Read the article

  • WiFi connected to router, but no internet connection

    - by Quetzacotl
    I just got a new notebook, a ThinkPad Edge E530, and installed Ubuntu on it. I'm pretty new to Ubuntu. On the same laptop, running Windows 7, the Wi-Fi connection works fine. Ethernet connection works both on Win7 and on Ubuntu. Only Wi-Fi on Ubuntu does not work; it connects to the Wi-Fi access point but I don't have Internet access. My wireless card is Intel Centrino Wireless-N 2230. What can fix the problem? EDIT: ifconfig -a eth0 Link encap:Ethernet HWaddr b8:88:e3:30:72:34 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:163 errors:0 dropped:0 overruns:0 frame:0 TX packets:163 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:10124 (10.1 KB) TX bytes:10124 (10.1 KB) usb0 Link encap:Ethernet HWaddr 02:15:e0:ec:01:00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 68:5d:43:43:71:e1 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::6a5d:43ff:fe43:71e1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:40 errors:0 dropped:0 overruns:0 frame:0 TX packets:220 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2801 (2.8 KB) TX bytes:26230 (26.2 KB) route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 127.0.0.1 iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"SATELITE" Mode:Managed Frequency:2.462 GHz Access Point: 00:1F:1F:8D:CC:08 Bit Rate=1 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=60/70 Signal level=-50 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:93 Invalid misc:243 Missed beacon:0 eth0 no wireless extensions.

    Read the article

  • /etc/postfix/transport missing; what should it look like?

    - by Thufir
    I'm following the mailman guide but couldn't locate /etc/postfix/ so created it as follows: root@dur:~# root@dur:~# cat /etc/postfix/transport dur.bounceme.net mailman: root@dur:~# root@dur:~# telnet localhost 25 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 dur.bounceme.net ESMTP Postfix (Ubuntu) ehlo fqdn_test 250-dur.bounceme.net 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN mail from:[email protected] 250 2.1.0 Ok rcpt to:thufir@localhost 451 4.3.0 <thufir@localhost>: Temporary lookup failure rcpt to:[email protected] 451 4.3.0 <[email protected]>: Temporary lookup failure quit 221 2.0.0 Bye Connection closed by foreign host. root@dur:~# root@dur:~# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix default_transport = smtp home_mailbox = Maildir/ inet_interfaces = loopback-only mailbox_command = /usr/lib/dovecot/deliver -c /etc/dovecot/conf.d/01-mail-stack-delivery.conf -m "${EXTENSION}" mailbox_size_limit = 0 mailman_destination_recipient_limit = 1 mydestination = dur, dur.bounceme.net, localhost.bounceme.net, localhost myhostname = dur.bounceme.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 readme_directory = no recipient_delimiter = + relay_domains = lists.dur.bounceme.net relay_transport = relay relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/dovecot-auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/certs/ssl-mail.pem smtpd_tls_key_file = /etc/ssl/private/ssl-mail.key smtpd_tls_mandatory_ciphers = medium smtpd_tls_mandatory_protocols = SSLv3, TLSv1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport root@dur:~# root@dur:~# tail /var/log/mail.log Aug 28 02:05:15 dur postfix/smtpd[20326]: connect from localhost[127.0.0.1] Aug 28 02:06:10 dur postfix/smtpd[20326]: warning: hash:/var/lib/mailman/data/aliases is unavailable. open database /var/lib/mailman/data/aliases.db: No such file or directory Aug 28 02:06:10 dur postfix/smtpd[20326]: warning: hash:/var/lib/mailman/data/aliases lookup error for "thufir@localhost" Aug 28 02:06:10 dur postfix/smtpd[20326]: NOQUEUE: reject: RCPT from localhost[127.0.0.1]: 451 4.3.0 <thufir@localhost>: Temporary lookup failure; from=<[email protected]> to=<thufir@localhost> proto=ESMTP helo=<fqdn_test> Aug 28 02:06:23 dur postfix/smtpd[20326]: warning: hash:/var/lib/mailman/data/aliases is unavailable. open database /var/lib/mailman/data/aliases.db: No such file or directory Aug 28 02:06:23 dur postfix/smtpd[20326]: warning: hash:/var/lib/mailman/data/aliases lookup error for "[email protected]" Aug 28 02:06:23 dur postfix/smtpd[20326]: NOQUEUE: reject: RCPT from localhost[127.0.0.1]: 451 4.3.0 <[email protected]>: Temporary lookup failure; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<fqdn_test> Aug 28 02:06:28 dur postfix/smtpd[20326]: disconnect from localhost[127.0.0.1] Aug 28 02:06:49 dur dovecot: pop3-login: Login: user=<thufir>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=20338, TLS Aug 28 02:06:49 dur dovecot: pop3(thufir): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0 root@dur:~# The manual page is here.

    Read the article

  • Delight and Excite

    - by Applications User Experience
    Mick McGee, CEO & President, EchoUser Editor’s Note: EchoUser is a User Experience design firm in San Francisco and a member of the Oracle Usability Advisory Board. Mick and his staff regularly consult on Oracle Applications UX projects. Being part of a user experience design firm, we have the luxury of working with a lot of great people across many great companies. We get to help people solve their problems.  At least we used to. The basic design challenge is still the same; however, the goal is not necessarily to solve “problems” anymore; it is, “I want our products to delight and excite!” The question for us as UX professionals is how to design to those goals, and then how to assess them from a usability perspective. I’m not sure where I first heard “delight and excite” (A book? blog post? Facebook  status? Steve Jobs quote?), but now I hear these listed as user experience goals all the time. In particular, somewhat paradoxically, I routinely hear them in enterprise software conversations. And when asking these same enterprise companies what will make the project successful, we very often hear, “Make it like Apple.” In past days, it was “make it like Yahoo (or Amazon or Google“) but now Apple is the common benchmark. Steve Jobs and Apple were not secrets, but with Jobs’ passing and Apple becoming the world’s most valuable company in the last year, the impact of great design and experience is suddenly very widespread. In particular, users’ expectations have gone way up. Being an enterprise company is no shield to the general expectations that users now have, for all products. Designing a “Minimum Viable Product” The user experience challenge has historically been, to echo the words of Eric Ries (author of Lean Startup) , to create a “minimum viable product”: the proverbial, “make it good enough”. But, in our profession, the “minimum viable” part of that phrase has oftentimes, unfortunately, referred to the design and user experience. Technology typically dominated the focus of the biggest, most successful companies. Few have had the laser focus of Apple to also create and sell design and user experience alongside great technology. But now that Apple is the most valuable company in the world, copying their success is a common undertaking. Great design is now a premium offering that everyone wants, from the one-person startup to the largest companies, consumer and enterprise. This emerging business paradigm will have significant impact across the user experience design process and profession. One area that particularly interests me is, how are we going to evaluate these new emerging “delight and excite” experiences, which are further customized to each particular domain? How to Measure “Delight and Excite” Traditional usability measures of task completion rate, assists, time, and errors are still extremely useful in many situations; however, they are too blunt to offer much insight into emerging experiences “Satisfaction” is usually assessed in user testing, in roughly equivalent importance to the above objective metrics. Various surveys and scales have provided ways to measure satisfying UX, with whatever questions they include. However, to meet the demands of new business goals and keep users at the center of design and development processes, we have to explore new methods to better capture custom-experience goals and emotion-driven user responses. We have had success assessing custom experiences, including “delight and excite”, by employing a variety of user testing methods that tend to combine formative and summative techniques (formative being focused more on identifying usability issues and ways to improve design, and summative focused more on metrics). Our most successful tool has been one we’ve been using for a long time, Magnitude Estimation Technique (MET). But it’s not necessarily about MET as a measure, rather how it is created. Caption: For one client, EchoUser did two rounds of testing.  Each test was a mix of performing representative tasks and gathering qualitative impressions. Each user participated in an in-person moderated 1-on-1 session for 1 hour, using a testing set-up where they held the phone. The primary goal was to identify usability issues and recommend design improvements. MET is based on a definition of the desired experience, which users will then use to rate items of interest (usually tasks in a usability test). In other words, a custom experience definition needs to be created. This can then be used to measure satisfaction in accomplishing tasks; “delight and excite”; or anything else from strategic goals, user demands, or elsewhere. For reference, our standard MET definition in usability testing is: “User experience is your perception of how easy to use, well designed and productive an interface is to complete tasks.” Articulating the User Experience We’ve helped construct experience definitions for several clients to better match their business goals. One example is a modification of the above that was needed for a company that makes medical-related products: “User experience is your perception of how easy to use, well-designed, productive and safe an interface is for conducting tasks. ‘Safe’ is how free an environment (including devices, software, facilities, people, etc.) is from danger, risk, and injury.” Another example is from a company that is pushing hard to incorporate “delight” into their enterprise business line: “User experience is your perception of a product’s ease of use and learning, satisfaction and delight in design, and ability to accomplish objectives.” I find the last one particularly compelling in that there is little that identifies the experience as being for a highly technical enterprise application. That definition could easily be applied to any number of consumer products. We have gone further than the above, including “sexy” and “cool” where decision-makers insisted they were part of the desired experience. We also applied it to completely different experiences where the “interface” was, for example, riding public transit, the “tasks” were train rides, and we followed the participants through the train-riding journey and rated various aspects accordingly: “A good public transportation experience is a cost-effective way of reliably, conveniently, and safely getting me to my intended destination on time.” To construct these definitions, we’ve employed both bottom-up and top-down approaches, depending on circumstances. For bottom-up, user inputs help dictate the terms that best fit the desired experience (usually by way of cluster and factor analysis). Top-down depends on strategic, visionary goals expressed by upper management that we then attempt to integrate into product development (e.g., “delight and excite”). We like a combination of both approaches to push the innovation envelope, but still be mindful of current user concerns. Hopefully the idea of crafting your own custom experience, and a way to measure it, can provide you with some ideas how you can adapt your user experience needs to whatever company you are in. Whether product-development or service-oriented, nearly every company is ultimately providing a user experience. The Bottom Line Creating great experiences may have been popularized by Steve Jobs and Apple, but I’ll be honest, it’s a good feeling to be moving from “good enough” to “delight and excite,” despite the challenge that entails. In fact, it’s because of that challenge that we will expand what we do as UX professionals to help deliver and assess those experiences. I’m excited to see how we, Oracle, and the rest of the industry will live up to that challenge.

    Read the article

  • Building a Solaris 11 repository without network connection

    - by user12611852
    Solaris 11 has been released and is a fantastic new iteration of Oracle's rock solid, enterprise operating system.  One of the great new features is the repository based Image Packaging system.  IPS not only introduces new cloud based package installation services, it is also integrated with our zones, boot environment and ZFS file systems to provide a safe, easy and fast way to perform system updates. My customers typically don't have network access and, in fact, can't connect to any network until they have "Authority to connect."  It's useful, however, to build up a Solaris 11 system with additional software using the new Image Packaging System and locally stored repository. The Solaris 11 documentation describes how to create a locally stored repository with full explanations of what the commands do. I'm simply providing the quick and dirty steps.  The easiest way is to download the ISO image, burn to a DVD and insert into your DVD drive.  Then as root: pkg set-publisher -G '*' -g file:///cdrom/sol11repo_full/repo solaris Now you can to install software using the GUI package manager or the pkg commands.  If you would like something more permanent (or don't have a DVD drive), however, it takes a little more work. After installing Solaris 11, download (on another system perhaps) the two files that make up the Solaris 11 repository from our download site Sneaker-net the files to your Solaris 11 system Unzip and cat the two files together to create one large ISO image. The file is about 6.9 GB in size zfs create rpool/export/repoSolaris11 zfs set atime=off rpool/export/repoSolaris11 zfs set compression=on rpool/export/repoSolaris11 (save some space) lofiadm -a sol-11-1111-repo-full.iso /dev/lofi/1 mount -F hsfs /dev/lofi/1 /mnt You could stop here and set the publisher to point to the /mnt/repo location, however, this mount will not be persistent across reboots. Copy the repository from the mounted ISO image to a permanent, on disk location. rsync -aP /mnt/repo /export/repoSolaris11 pkgrepo -s /export/repoSolaris11 refresh pkg set-publisher -G '*' -g /export/repoSolaris11/repo solaris You now have a locally installed repository for adding additional software packages for Solaris 11.  The documentation also takes you through publishing your repository on the network so that others can access it.

    Read the article

  • Wireless connection by using command screen

    - by Amadeus
    I installed Ubuntu 12.04 armhf to my beagleboard-xm and now trying to connect to a wireless network. First, I checked if I can search for available networks: ubuntu@arm:~$ iwlist scan lo Interface doesn't support scanning. usb0 Interface doesn't support scanning. wlan0 Scan completed : Cell 01 - Address: EA:7D:EF:60:C9:0B Channel:1 Frequency:2.412 GHz (Channel 1) Quality=70/70 Signal level=-23 dBm Encryption key:on ESSID:"ghostrider" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Ad-Hoc Extra:tsf=000000005a1ab50e Extra: Last beacon: 6242ms ago IE: Unknown: 000A67686F73747269646572 IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 06020000 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: Unknown: 32040C121860 IE: Unknown: 2D1A2C181BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D16010800000000FF000000000000000000000000000000 IE: Unknown: DD09001018020000000000 Then I edited /etc/network/interfaces file to the following: root@arm:/etc/wpa_supplicant# cat /etc/network/interfaces auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # Example to keep MAC address between reboots #hwaddress ether DE:AD:BE:EF:CA:FE # WiFi Example auto wlan0 iface wlan0 inet dhcp wpa-ssid "ghostrider" wpa-psk "b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf" But I cannot still connect to the wireless network: root@arm:/etc/wpa_supplicant# iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Asociated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on eth0 no wireless extensions. root@arm:/etc/network# ifup wlan0 Failed to bring up wlan0. What is wrong? Should I change any other files also? But I think it was enough. By the way if you are curious about where that wpa-psk came from: zero@ghostrider:~$ wpa_passphrase ghostrider 34bddf67c2 network={ ssid="ghostrider" #psk="34bddf67c2" psk=b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf } I will appreciate any effort to help. Regards, Amadeus ps: Also I tried to connect manually: root@arm:/etc/network# iwconfig wlan0 essid ghostrider key s:34bddf67c2 But this did not solve my problem also.

    Read the article

  • Screen brightness dull after upgrade to Ubuntu 14.04

    - by user288426
    After upgrading to Ubuntu 14.04 I found that I could not increase screen brightness. I'm using a Samsung NC110 netbook. Initially the function key to modify brightness did not respond at all. After implementation of the first part of the fix, the key came alive and the brightness bar could be modified. Yet at maximum brightness indicated the screen still remained very dull. The 2nd part of the fix cures that problem, at least for this type of machine. First part of the fix was copied and modified in line with my experience from following post: How to control Brightness Open a terminal (Ctrl + Alt + T). Then type sudo nano /etc/default/grub. It will ask for your password. Type it in. Around the 11th line, there will be something like: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash". Change it to: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor" Save the file by Ctrl+O followed by Ctrl+X. Then run sudo update-grub in the terminal. Reboot and see if backlight adjustment works. Then I needed to modify the rc.local file. Therefore read below fix to understand the procedure: problem with adjusting brightness Ubuntu 14.04 In my case I had 2 folders listed under /sys/class/backlight which were: intel_backlight samsung I realized that the samsung folder is governing. I had to modify the check for max brightness to: cat /sys/class/backlight/samsung/max_brightness In my case the max value obtained is 8. Besides putting this into rc.local, I also had to uncomment the first line to get this working. My rc.local under /etc/ now looks as follows: !/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. echo 8 > /sys/class/backlight/samsung/brightness exit 0 Now I can modify brightness on my netbook and also can get the screen up to its maximum brightness. Hope this is helpful.

    Read the article

  • Help writing server script to ban IP's from a list

    - by Chev_603
    I have a VPS that I use as an openvpn and web server. For some reason, my apache log files are filled with thousands of these hack attempts: "POST /xmlrpc.php HTTP/1.0" 404 395 These attack attempts fill up 90% of my logs. I think it's a WordPress vulnerability they're looking for. Obviously they are not successful (I don't even have Wordpress on my server), but it's annoying and probably resource consuming as well. I am trying to write a bash script that will do the following: Search the apache logs and grab the offending IP's (even if they try it once), Sort them into a list with each unique IP on a seperate line, And then block them using the IP table rules. I am a bash newb, and so far my script does everything except Step 3. I can manually block the IP's, but that's tedious and besides, this is Linux and it's perfectly capable of doing it for me. I also want the script to be customizable so that I (or anyone else who wants to use it) can change the variables to suit whatever situation I/they may deal with in the future. Here is the script so far: #!/bin/bash ##IP LIST GENERATOR ##Author Chev Young ##Script to search Apache logs and list IP's based on custom filters ## ##Define our variables: DIRECT=~/Script ##Location of script&where to put results/temp files LOGFILE=/var/log/apache2/access.log ## Logfile to search for offenders TEMPLIST=xml_temp ## Temporary file name IP_LIST=ipstoban ## Name of results file FILTER1=xmlrpc ## What are we looking for? (Requests we want to ban) cd $DIRECT if [ ! -f $TEMPLIST ];then touch $TEMPLIST ##Create temp file fi cat $LOGFILE | grep $FILTER1 >> $DIRECT/$TEMPLIST ## Only interested in the IP's, so: sed -e 's/\([0-9]\+\.[0-9]\+\.[0-9]\+\.[0-9]\+\).*$/\1/' -e t -e d $DIRECT/$TEMPLIST | sort | uniq > $DIRECT/$IP_LIST rm $TEMPLIST ## Clean temp file echo "Done. Results located at $DIRECT/$IP_LIST" So I need help with the next part of the script, which should ban the IP's (incoming and perhaps outgoing too) from the resulting $IP_LIST file. I don't care if it utilizes UFW or IPTables directly, as long as it bans the IP's. I'd probably run it as a cron task. What I'm having trouble with is understanding how to use line of the result file as a seperate variable to do something like: ufw deny $IP1 $IP2 $IP3, ect Any ideas? Thanks.

    Read the article

  • Weird Ubuntu Desktop Boot Partition On External Hard Drive

    - by Magnitus
    I have a Thinkpad with Windows 7. Last time I installed an Ubuntu/Windows dual boot, Windows was never same after and regularly got corrupted so this time, I installed Ubuntu on a separate external hard drive. I took a 500 GB external hard drive and used Windows to shrink the partition on it to 400 GB, freeing 100 GB to install Ubuntu. Then I modified the booting priority of my computer to boot from the external hard drive if present. Then, I installed Ubuntu desktop on the external hard drive using a DVD, picked the most simplistic partitioning scheme I could get away with (didn't go auto as it didn't include the external hard drive as a choice) and voilà. Fast forward some time and I'm trying to refresh my understanding of Linux partitions to install a bunch of servers, so I'm looking at the current partitioning scheme on my external hard drive and find the boot partition puzzling... sda is my integrated hard drive with Windows 7. sdb is my Ubuntu desktop external hard drive. Running parted on sdb, I get this: (parted) print Model: WD My Passport 0740 (scsi) Disk /dev/sdb: 500GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 393GB 393GB primary ntfs boot 2 393GB 500GB 107GB extended 5 393GB 425GB 32.8GB logical linux-swap(v1) 6 425GB 500GB 74.6GB logical ext4 At this point, I'm wondering why the ntfs partition is flagged as "boot" and not my ext4 partition which is the partition that contains / (and by extension, /boot since it's not on its own separate partition). Looking at mtab only confirms what I already know: eric@eric-ThinkPad-W530:~$ sudo cat /etc/mtab /dev/sdb6 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/cgroup tmpfs rw 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 none /run/user tmpfs rw,noexec,nosuid,nodev,size=104857600,mode=0755 0 0 none /sys/fs/pstore pstore rw 0 0 systemd /sys/fs/cgroup/systemd cgroup rw,noexec,nosuid,nodev,none,name=systemd 0 0 gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,user=eric 0 0 /dev/sdb1 /media/eric/My\040Passport fuseblk rw,nosuid,nodev,allow_other,default_permissions,blksize=4096 0 0 My lack of understanding concerning this is not vital to anything (this is only my development desktop partition), but somehow annoys me. Any insight that could shed some light on this would be welcome.

    Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >