Search Results

Search found 30014 results on 1201 pages for 'go yourself'.

Page 72/1201 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Sharing My Thoughts on Space Flight

  - by Grant Fritchey

  This went out in the DBA newsletter from Red Gate, but I enjoyed writing it so much, I thought I'd share it to a wider audience: I grew up watching the US space program. I watched men walk on the moon for the first time in 1969, when I was only six years old. From that moment on, I dreamed of going into space. I studied aeronautics and tried to get into the Air Force Academy, all in preparation for my long career as an astronaut. Clearly, that didn't quite work out for me. But it sure could for you. At Red Gate, we're running a new contest: DBA in Space. The prize is a sub-orbital flight. When I first got word of this contest, my immediate response was, "And you need me to go right away and do a test flight? Excellent!" No, no test flight needed, plus I was pretty low on the list of volunteers. "That's OK, I'll just enter." Then I was told that, as a Red Gate employee, I couldn't win. My next response was, "I quit".eventually, I was talked down off the ledge, and agreed to help make this special for some other DBA. Many (most?) of us are science fiction fans, either the soft science of Star Trek and Star Wars, or the hard science of Niven and Pournelle, or Allen Steele. We watched the Shuttles go up and land. We've been dreaming of our own trips into orbit and our vacation-home on the Moon for a long, long time. All that might not arrive on schedule, but you've got a shot at breaking clear of the atmosphere. The first stage is a video quiz, starring Brad McGehee, and it's live at www.DBAinSpace.com now. Go for it. Good luck and God speed!

  Read the article

• How to keep track of previous scenes and return to them in libgdx

  - by MxyL

  I have three scenes: SceneTitle, SceneMenu, SceneLoad. (The difference between the title scene and the menu scene is that the title scene is what you see when you first turn on the game, and the menu scene is what you can access during the game. During the game, meaning, after you've hit "play!" in the title scene.) I provide the ability to save progress and consequently load a particular game. An issue that I've run into is being able to easily keep track of the previous scene. For example, if you enter the load scene and then decide to change your mind, the game needs to go back to where you were before; this isn't something that can be hardcoded. Now, an easy solution off the top of my head is to simply maintain a scene stack, which basically keeps track of history for me. A simple transaction would be as follows I'm currently in the menu scene, so the top of the stack is SceneMenu I go to the load scene, so the game pushes SceneLoad onto the stack. When I return from the load scene, the game pops SceneLoad off the stack and initializes the scene that's currently at the top, which is SceneMenu I'm coding in Java, so I can't simply pass around Classes as if they were objects, so I've decided implemented as enum for eac scene and put that on the stack and then have my scene managing class go through a list of if conditions to return the appropriate instance of the class. How can I implement my scene stack without having to do too much work maintaining it?

  Read the article

• Internet of Things (IoT) Thanksgiving Special: Turkey Tweeter (Part 1)

  - by hinkmond

  It's time for the Internet of Things (ioT) Thanksgiving Special. This time we are going to work on a special Do-It-Yourself project to create an Internet of Things temperature probe to connect your Turkey Day turkey to the Internet by writing a Thanksgiving Day Java Embedded app for your Raspberry Pi which will send out tweets as it cooks in your oven. If you're vegetarian, don't worry, you can follow along and just run the simulation of the Turkey Tweeter, or better yet, try a tofu version of the Turkey Tweeter. Here is the parts list: 1 Vernier Go!Temp USB Temperature Probe 1 Uncooked Turkey 1 Raspberry Pi (not Pumpkin Pie) 1 Roll thermal reflective tape You can buy the Vernier Go!Temp USB Temperature Probe for $39 from here: http://www.vernier.com/products/sensors/temperature-sensors/go-temp/. And, you can get the thermal reflective tape from any auto parts store. (Don't tell them what you need it for. Say it's for rebuilding your V-8 engine in your Dodge Hemi. Avoids the need for a long explanation and sounds cooler...) The uncooked turkey can be found in your neighborhood grocery store. But, if you're making a vegetarian Tofurkey, you're on your own... The Java Embedded app will be the same, though (Java is vegan). So, grab all your parts and come back here for the next part of this project... Hinkmond

  Read the article

• Navigation in Win8 Metro Style applications

  - by Dennis Vroegop

  In Windows 8, Touch is, as they say, a first class citizen. Now, to be honest: they also said that in Windows 7. However in Win8 this is actually true. Applications are meant to be used by touch. Yes, you can still use mouse, keyboard and pen and your apps should take that into account but touch is where you should focus on initially. Will all users have touch enabled devices? No, not in the first place. I don’t think touchscreens will be on every device sold next year. But in 5 years? Who knows? Don’t forget: if your app is successful it will be around for a long time and by that time touchscreens will be everywhere. Another reason to embrace touch is that it’s easier to develop a touch-oriented app and then to make sure that keyboard, nouse and pen work as doing it the other way around. Porting a mouse-based application to a touch based application almost never works. The reverse gives you much more chances for success. That being said, there are some things that you need to think about. Most people have more than one finger, while most users only use one mouse at the time. Still, most touch-developers translate their mouse-knowledge to the touch and think they did a good job. Martin Tirion from Microsoft said that since Touch is a new language people face the same challenges they do when learning a new real spoken language. The first thing people try when learning a new language is simply replace the words in their native language to the newly learned words. At first they don’t care about grammar. To a native speaker of that other language this sounds all wrong but they still will be able to understand what the intention was. If you don’t believe me: try Google translate to translate something for you from your language to another and then back and see what happens. The same thing happens with Touch. Most developers translate a mouse-click into a tap-event and think they’re done. Well matey, you’re not done. Not by far. There are things you can do with a mouse that you cannot do with touch. Think hover. A mouse has the ability to ‘slide’ over UI elements. Touch doesn’t (I know: with Pen you can do this but I’m talking about actual fingers here). A touch is either there or it isn’t. And right-click? Forget about it. A click is a click.  Yes, you have more than one finger but the machine doesn’t know which finger you use… The other way around is also true. Like I said: most users only have one mouse but they are likely to have more than one finger. So how do we take that into account? Thinking about this is really worth the time: you might come up with some surprisingly good ideas! Still: don’t forget that not every user has touch-enabled hardware so make sure your app is useable for both groups. Keep this in mind: we’re going to need it later on! Now. Apps should be easy to use. You don’t want your user to read through pages and pages of documentation before they can use the app. Imagine that spotter next to an airfield suddenly seeing a prototype of a Concorde 2 landing on the nearby runway. He probably wants to enter that information in our app NOW and not after he’s taken a 3 day course. Even if he still has to download the app, install it for the first time and then run it he should be on his way immediately. At least, fast enough to note down the details of that unique, rare and possibly exciting sighting he just did. So.. How do we do this? Well, I am not talking about games here. Games are in a league of their own. They fall outside the scope of the apps I am describing. But all the others can roughly be characterized as being one of two flavors: the navigation is either flat or hierarchical. That’s it. And if it’s hierarchical it’s no more than three levels deep. Not more. Your users will get lost otherwise and we don’t want that. Flat is simple. Just imagine we have one screen that is as high as our physical screen is and as wide as you need it to be. Don’t worry if it doesn’t fit on the screen: people can scroll to the right and left. Don’t combine up/down and left/right scrolling: it’s confusing. Next to that, since most users will hold their device in landscape mode it’s very natural to scroll horizontal. So let’s use that when we have a flat model. The same applies to the hierarchical model. Try to have at most three levels. If you need more space, find a way to group the items in such a way that you can fit it in three, very wide lanes. At the highest level we have the so called hub level. This is the entry point of the app and as such it should give the user an immediate feeling of what the app is all about. If your app has categories if items then you might show these categories here. And while you’re at it: also show 2 or 3 of the items itself here to give the user a taste of what lies beneath. If the user selects a category you go to the section part. Here you show several sections (again, go as wide as you need) with again some detail examples. After that: the details layer shows each item. By giving some samples of the underlaying layer you achieve several things: you make the layer attractive by showing several different things, you show some highlights so the user sees actual content and you provide a shortcut to the layers underneath. The image below is borrowed from the http://design.windows.com website which has tons and tons of examples: For our app we’ll use this layout. So what will we show? Well, let’s see what sorts of features our app has to offer. I’ll repeat them here: Note planes Add pictures of that plane Notify friends of new spots Share new spots on social media Write down arrival times Write down departure times Write down the runway they take I am sure you can think of some more items but for now we'll use these. In the hub we’ll show something that represents “Spots”, “Friends”, “Social”. Apparently we have an inner list of spotter-friends that are in the app, while we also have to whole world in social. In the layer below we show something else, depending on what the user choose. When they choose “Spots” we’ll display the last spots, last spots by our friends (so we can actually jump from this category to the one next to it) and so on. When they choose a “spot” (or press the + icon in the App bar, which I’ll talk about next time) they go to the lowest and final level that shows details about that spot, including a picture, date and time and the notes belonging to that entry. You’d be amazed at how easy it is to organize your app this way. If you don’t have enough room in these three layers you probably could easily get away with grouping items. Take a look at our hub: we have three completely different things in one place. If you still can’t fit it all in in a logical and consistent way, chances are you are trying to do too much in this app. Go back to your mission statement, determine if it is specific enough and if your feature list helps that statement or makes it unclear. Go ahead. Give it a go! Next time we’ll talk about the look and feel, the charms and the app-bar….

  Read the article

• The tale of how the PowerShell CmdLets got installed with Azure SDK 1.4

  - by Enrique Lima

  I installed the Azure SDK 1.4 while rebuilding my laptop and ran the installation for the Windows Azure Service Management PowerShell CmdLets. Kicked off the installation script for the WASM PowerShell CmdLets by locating the path to which WASM PowerShell CmdLets was deployed to. Double clicked the startHere command. It will then open the WASM installation dialog. Click Next. Click Next. Notice the red x next to the Azure SDK 1.3, the problem is I have SDK 1.4 Here is the workaround, I go back to the location of the deployed WASM sources. Go into the setup path, then scripts>dependencies>check. Now, locate the CheckAzureSDK.ps1 file, and right-click, then edit. This is the content in the ps1 file, it check for the specific version of the Azure SDK, in this case, it is looking for version 1.3.11133.0038. We need for it to check for version 1.4.20227.1419 Now, save your ps1 file, go back to the open WASM install dialog, and click rescan. This time it should pass, then click next. A Command prompt window will appear, click any key. This completes the installation, click Close.

  Read the article

• Buffer System For Items

  - by Ohmages

  I am going to reference this image of what I want to accomplish in JavaScript. This is the Diablo buffer system. This question may be a bit advanced (or possibly not even allowed). But I was wondering how you might go about implementing this type of system in a JavaScript game. Currently to implement such a system in JavaScript escapes me, and I am turning to SO to get some suggestions, ideas, and hopefully some insight in how I could accomplish this without being to costly on the CPU. Some thoughts of mine for implementing such a system would be to: Create DIVS within a DIV that hold each position of the inventory Go through each item you own in a container and see which DIV it belongs to Make said item images the DIVs image This type of system might possibly work if ALL items were 1x1, but for this example its not going to work out. I am at a complete lost of ideas how to even accomplish this. Although, maybe rendering directly to the canvas and checking mouse cords could work, there would more than likely be A HUGE annoyance when checking if other items are overlapping each other (meaning you cant place the item down, and possibly switching item with the cursor item ). That said, what am I left with? Do I need to makeshift my own hack system with messy code, or is there some source out there (that I don't know about) that has replicated this type of system in their own game. I would be very grateful to get some replies on how you might go about doing this, and will accept answers that can logically explain how you might implement such a system (code is not required). P.S. Id like to use pure JavaScript, and nothing else (even though it might be "reinventing the wheel", I also like to learn).

  Read the article

• Who can change the View in MVC?

  - by Luke

  I'm working on a thick client graph displaying and manipulation application. I'm trying to apply the MVC pattern to our 3D visualization component. Here is what I have for the Model, View, and Controller: Model - The graph and it's metadata. This includes vertices, edges, and the attributes of each. It does not contain position information, icons, colors, or anything display related. View - This would commonly be called a scene graph. It includes the 3D display information, texture information, color information, and anything else that is related specifically to the visualization of the model. Controller - The controller takes the view and displays it in a Window using OpenGL (but it could potentially be any 3D graphics package). The application has various "layouts" that change the position of the vertices in the display. For instance, one layout may arrange the vertices in a circle. Is it common for these layouts to access and change the view directly? Should they go through the Controller to access the View? If they go through the Controller, should they just ask for direct access to the View or should each change go through the controller? I realize this is a bit different from the standard MVC example where there a finite number of Views. In this case, the View can change in an infinite number of ways. Perhaps I'm shattering some basic principle of MVC here. Thanks in advance!

  Read the article

• How to effectively design a piece of software

  - by ti83plus

  Im a compsci student and ive got some experience in various languages and paradigms c/java/python/ruby/html/css/scheme/sql/asp(classic). I realise that i want to have some software in my portfolio for future job hunting even tho i still have 2 years left of my education. Ive got a pretty good idea of what i want to make, its a webapp. Most shops around here are either .net or java and since i know java best and dont have access to ms developer tools im thinking i should go with java. Even tho i feel i know the principles of OOP pretty good ive got no clue how to go from my idea to a working solution. Where can i access information about designing the underlying architechture of my solution? Also i would like to know what other technologies i should train on, my current list includes javascript(and possibly a javascript library) some sort of java web framework tips are appreciated. I would like to add support for android/iphone apps in the future and this is something i have to take into account when designing the app. I have done a course on software engineering but i found this to be more centered around project management ideas then the actual design and implementation. So i would like tips on technologies i should focus on to get the most out of my time without the massive overhead of huge config processes but at the same time keep my project viable in a business sense, so that i use technologies that are relevant for business (java developer jobs). And i would also like tips on where i can learn more about the design process around a software project, i will be working mostly alone. But i find the approach ive used up until now (start coding and figure it out as you go) wont suffice.

  Read the article

• canvas tile grid, hover effects, single tilesheet, etc

  - by user121730

  I'm currently in the process of building both the client and server side of an html5, canvas, and WebSocket game. This is what I have thus far for the client: http://jsfiddle.net/dDmTf/7/ Current obstacles The hover effect has no idea what to put back after the mouse leaves. Currently it's just drawing a "void" tile, but I can't figure out how to redraw a single tile without redrawing the whole map. How would I go about storing multiple layers within the map variable? I was considering just using a multi-dimensional array for each layer (similar to what you see as the current array), and just iterating through it, but is that really an efficient way of doing it? Side note The tile sheet being used for the jsfiddle display is only for development. I'll be replacing it as things progress in the engine. I hope you can help! Hopefully you guys can help me, I've been struggling to get through things, since I'm learning how things kind of stuff works as I go. If you guys have any pointers for my JavaScript, feel free. As I'm more or less learning advanced usage as I go, I'm sure I'm doing plenty of things wrong. Note: I will continue to update this post as the engine improves, but updating the jsfiddle link and updating the obstacles list by striking things that have been solved, or adding additions. Thanks!

  Read the article

• Beginners guide to developing optimization software

  - by Florenc

  I am novice in "serious" programming i.e. applications that deal with real-life applications and software projects that go beyond school assignments. My interests include optimization, operations research, algorithms and lately i discovered how much I do like software design/development/engineering. I have already developed some simple desktop applications for some "famous" problems like TSP using heuristc approaches, a VRP solver (in progress) and so on. While developing this kind of software I actually used basic concepts taught at school such as object-orientation analysis and design. But, I found these courses rather elementary and quite boring (for my expectations). So I decided to go a little further and start developing "real" software (and this is where I realized how important and interesting software engineering/design is.) Now, here's my issue: I can not find a "study guide" for developing software of this kind. Currently, there are numerous resources out there (books, websites, tutorials) in designing and developing complex IS, web applications, smartphone apps but I can't find a book for example entitled "optimization software development". Definetly, someone could claim that "design patterns apply to software in general" but that's not my point. My point is that I could simply use my imagination for "simple" implementations, but what happens, when my imagination can not go further? In other words I'm looking for a guide/path to bridge the gap between: Mathematics-Algorithm Design-Software Engineering-Optimization-Software development

  Read the article

• The Web Weekly Newsletter

  - by dwahlin

  Several months ago I created a few FlipBoard magazines that a ton of developers (over 50,000!) have used to access content on JavaScript, HTML5, AngularJS, Azure, XAML, Web API, and more. While the feedback on the magazines has been super positive, several people have asked about having the content pushed to them. I’m generally too busy to remember to go check a particular link on a regular basis so I definitely understood and agree with the comments. I’m happy to announce a new newsletter I’m calling the Web Weekly. It’ll highlight content across the different FlipBoard magazines plus other sources and go out to subscribers a few times a month (weekly when possible). The first issue is ready to go and includes a “video highlights” segment I created to show some of my favorite content in the first issue. If you’re interested in staying on top of all the cutting edge Web technologies feel free to subscribe below!   Here’s a sample of some of the articles included:     Here’s the video from the first edition of the newsletter:   Subscribe to the newsletter below….

  Read the article

• Good links somehow being converted to ones with a PHP redirect (not a virus)

  - by Rebecca

  This has happened to links we put on web pages and in emails. We might put www.oursite.org/work/ but when I view source it shows up as webmail.ourhosting.ca/hwebmail/services/go.php?url=https%3A%2F%2Fwww.oursite.org%2F%2work%2F This ends up at the webmail login page for our web host. But only some of the people who click the link get the login page; others go directly to the original page we intended. We don't want it to go to the webmail login page, nobody needs to log in to our web site. This occurs for links to pages on our site, but also to links to other sites that we put in emails or in posts. It seems to be browser independent as well as e-mail client independent as we variously have used Firefox and Chrome as well as MS Outlook and Thunderbird. I've tried to resolve the issue with our webhost but they keep telling me they don't support our browser, or our email client (i.e., they don't understand the issue). At the moment, our only option is to try another web host just to get rid of their login. Any ideas about what's going on?

  Read the article

• Should I be learning Linq, Direct SQL Commands (in .net), EF or other?

  - by Wil

  Basically, I have a very good knowledge of plain old SQL coming from Classic ASP programming. Over the past couple of months, I have been learning C# and today was my first full day at MVC 3 (Razor) which I am loving! I need to get back in to Databases and I know that writing SqlCommand everywhere is obviously outdated (although it is nice I can still do it!). I used to go to a great usergroup as an IT Pro and the developer stuff went completely over my head, however I do remember a few things which kept coming up such as LINQ... However, that was some time ago and now the same people on Twitter are saying how out dated it is. I have tried to do research on both and I am clueless as to what direction I should go in, or when to use one over another (if learning both is a good thing). I am more so confused as I thought EF was a part of the .Net Framework, however, reading through the quick start guide, I had to download a component using Nuget. ... Basically I am out of my depth here and just need some honest advice of where to go!

  Read the article

• Twinview broken on upgrade to ubuntu 10.10

  - by mapkyca

  I have been on 9.10 for over a year on the grounds that if it ain't broke, don't fix it. However, I had a spare weekend and figured it was probably about time... I performed an upgrade to 10.4, and everything seemed to proceed smoothly, so I took the plunge and went for 10.10. Disaster. My twinview Nvidia display which had been working perfectly is now broken. On boot everything seems fine, but when X starts and the second monitor springs into life the primary winks out and switches off - almost as if its been put into an unsupported display mode. The system seems to think there's a second monitor - the nvidia logo is split across the two screens, but it can't seem to start. Things I've tried: Swapping the monitors (one is older than the other, and its definitely the port not the actual monitor) Rolling back to an old Xorg conf from prior to the upgrade Installing a non-beta driver direct from Nvidia (this seems to start both monitors but then apparently stops boot and causes the second display to 'wink'. Twinview seems non-functional, both displays are mirrors) Disabling EDID Disabling twinview, logging in and attempting to use the Nvidia config to re-detect the monitors (second monitor is falsely detected and won't go higher than 1024x768. Selecting 'apply' causes one screen to go blank and the other to display garbage) googling for about 5 hours looking for similar problems, none of the offered solutions seemed to work I'm at a loss, and it is looking very much like I'm going to have to go through a time consuming reinstall to downgrade back to the working 10.4. Any thoughts?

  Read the article

• Is implementing an interface defined in a subpackage an anti-pattern?

  - by Michael Kjörling

  Let's say I have the following: package me.my.pkg; public interface Something { /* ... couple of methods go here ... */ } and: package me.my; import me.my.pkg.Something; public class SomeClass implements Something { /* ... implementation of Something goes here ... */ /* ... some more method implementations go here too ... */ } That is, the class implementing an interface lives closer to the package hierarchy root than does the interface it implements but they both belong in the same package hierarchy. The reason for this in the particular case I have in mind is that there is a previously-existing package that groups functionality which the Something interface logically belongs to, and the logical (as in both "the one you'd expect" and "the one where it needs to go given the current architecture") implementation class exists previously and lives one level "up" from the logical placement of the interface. The implementing class does not logically belong anywhere under me.my.pkg. In my particular case, the class in question implements several interfaces, but that feels like it doesn't make any (or at least no significant) difference here. I can't decide if this is an acceptable pattern or not. Is it or is it not, and why?

  Read the article

• How can I make smoother upwards/downwards controls in pygame?

  - by Zolani13

  This is a loop I use to interpret key events in a python game. # Event Loop for event in pygame.event.get(): if event.type == QUIT: pygame.quit() sys.exit() if event.type == pygame.KEYDOWN: if event.key == pygame.K_a: my_speed = -10; if event.key == pygame.K_d: my_speed = 10; if event.type == pygame.KEYUP: if event.key == pygame.K_a: my_speed = 0; if event.key == pygame.K_d: my_speed = 0; The 'A' key represents up, while the 'D' key represents down. I use this loop within a larger drawing loop, that moves the sprite using this: Paddle1.rect.y += my_speed; I'm just making a simple pong game (as my first real code/non-gamemaker game) but there's a problem between moving upwards <= downwards. Essentially, if I hold a button upwards (or downwards), and then press downwards (or upwards), now holding both buttons, the direction will change, which is a good thing. But if I then release the upward button, then the sprite will stop. It won't continue in the direction of my second input. This kind of key pressing is actually common with WASD users, when changing directions quickly. Few people remember to let go of the first button before pressing the second. But my program doesn't accommodate the habit. I think I understand the reason, which is that when I let go of my first key, the KEYUP event still triggers, setting the speed to 0. I need to make sure that if a key is released, it only sets the speed to 0 if another key isn't being pressed. But the interpreter will only go through one event at a time, I think, so I can't check if a key has been pressed if it's only interpreting the commands for a released key. This is my dilemma. I want set the key controls so that a player doesn't have to press one button at a time to move upwards <= downwards, making it smoother. How can I do that?

  Read the article

• Dual boot Win/7 and Ubuntu 12.04

  - by Brian

  So I've always wanted Ubuntu along with windows 7 and finally I went to try and make my computer that last night. (( I'll just skip the long story. )) I loaded Ubuntu from CD, Version 12.04 and it loaded fine and then I clicked the install icon. It asked me witch option I would like to proceed with, and I answered Ubuntu, in Windows 7. So it did everything rather quickly, and restarted itself; upon restarting itself it ejected the CD, and I thought everything was good to go. It brought me to the Option to either load Ubuntu or Windows, I was thinking to myself wow that was alot easier than I thought; Windows 7 Loads fine after it checked the HDD but when I go to load Ubuntu it brings me to the loading screen and then stays there for a long period time, finally moves on as if it was going to load into the regular dashboard, but loads into a dos looking thing. (( I'm sorry if I sound retarded explaining everything I'm not great with computers )) And at the very time it says something like installation failed. It also says it could not find a file or something like that. If you need me to go back and get the full message and put it up here I will. But if I put the CD in it loads fine. Thanks in advance for everyone that helps me solve this problem.

  Read the article

• Trouble with Collada bones

  - by KyleT

  I have a Collada file with a rigged mesh. I've read the node tags in the library_visual_scenes tag and extracted the matrix for each node and stored everything in a hierarchical bone structure. My Matrix container is "row major", so I'd store the first float of a matrix tag in the 1st row, 1st column, the second in the 1st row, 2nd column, etc. From what I gather this is the Bind Pose Matrix. After that I went through the tag and extracted the float array in the source tag of the skin tag of the controller for the mesh. I stored each matrix from this float array in their corresponding Bone as the Inverse Bind Matrix. I also extracted the bind-shape-matrix and stored it. Now I'd like to draw the skeleton with OpenGL to see if everything is working correctly before I go about skinning. I iterate once over my bones and multiply a bone's Bind Pose Matrix by it's parents and store that. After that I iterate again over the bones and multiply the result of the previous matrix multiplication by the Inverse Bind Matrix and then by the Bind Shape Matrix. The results look something like this: [0.2, 9.2, 5.8, 1.2 ] [4.6, -3.3, -0.2, -0.1 ] [-1.8, 0.2, -4.2, -3.9 ] [0, 0, 0, 1 ] I've had to go to various sources to get the little understanding of Collada I have and books about 3d transform matricies can get pretty intense. I've hit a brick wall and if you could please read through this and see if there is something I'm doing wrong, and how I'd go about getting an X,Y,Z to draw a point for each of these joints once I've calculated the final transform, I'd really appreciate it.

  Read the article

• How to run around another football player

  - by Lumis

  I have finished a simple 2D one-on-one indoor football Android game. The thing that it seemed so simple to me, a human being, turned out to be difficult for a computer: how to go around the opponent … At the moment the game logic of the computer player is that if it hits into the human player will step back few points on the pixel greed and then try again to go towards the ball. The problem is if the human player is in-between then the computer player will oscillate in one place, which does not look very nice and the human opponent can use this weakness to control the game. You can see this in the photo – at the moment the computer will go along the red line indefinitely. I tried few ideas but it proved not easy to do it when both the human player and the ball are constantly moving so at each step computer would change directions and “oscillate” again. Once when the computer player reaches the ball it will kick it with certain amount of random strength and direction towards the human’s goal. The question here is how to formulate the logic of going around the ever moving human opponent and how to translate it into the co-ordinate system and frame by frame animation… any suggestions welcome.

  Read the article

• Help with collision detection method [on hold]

  - by derek jones

  I was wondering if any of you could spare me some time to go over some collision detection on my platform engine. i tried XNA a few years back but for reasons i wont go into online could not continue, my health is now at a state where i am ready to try again but due to my current circumstances (and age) schooling is out of the question so i turn to you guys for help. Whilst i can adapt the MS sample ok and have some great features, you will agree modifying code is not really learning. So i have spent the last couple of week going over my old MS code and lots of stuff online and decided on what i want and have ported most of it over to code that i understand 90% of. I have my player class that moves about, jumps with gravity, has animations and a bounding box that follows it around. I have my map & basic level class to load levels from text files. Its just how i handle the collisions that i am struggling with as i will want per pixel collision on some tiles(i have code for this in a pong game i made so that should be ok). I'm pretty clear in my mind on what i need to do its just putting it in code and in the right place, here's what i was thinking. I was going to do it all in layers, have a tile layer, a collision layer & an item layer this way i could make a nice map editor in Win Forms at some point. Anyway i need to read in the collision layer the assign each tile a rectangle and collision property, and this is where i get me. Would any of you be able to spare some time and go over this with me ? I will post some code later Regards Del

  Read the article

• Is it a good practice to create a list of definitions for all symbols and words in a programming language?

  - by MrDaniel

  After arriving at this point in Learning Python The Hard Way I am wondering if this is a good practice to create a list of symbols and define what they do as noted in bold below, for every programming language. This seems reasonable, and might be very useful to have when jumping between programming languages? Is this something that programmers do or is it just a waste of effort? Exercise 22: What Do You Know So Far? There won't be any code in this exercise or the next one, so there's no WYSS or Extra Credit either. In fact, this exercise is like one giant Extra Credit. I'm going to have you do a form of review what you have learned so far. First, go back through every exercise you have done so far and write down every word and symbol (another name for 'character') that you have used. Make sure your list of symbols is complete. Next to each word or symbol, write its name and what it does. If you can't find a name for a symbol in this book, then look for it online. If you do not know what a word or symbol does, then go read about it again and try using it in some code. You may run into a few things you just can't find out or know, so just keep those on the list and be ready to look them up when you find them. Once you have your list, spend a few days rewriting the list and double checking that it's correct. This may get boring but push through and really nail it down. Once you have memorized the list and what they do, then you should step it up by writing out tables of symbols, their names, and what they do from memory. When you hit some you can't recall from memory, go back and memorize them again.

  Read the article

• Ubuntu Not Waking From Suspend

  - by thenorm

  I'm running Ubuntu 12.04 (not wubi, usb install) alongside Windows 7 on my Toshiba Satellite Laptop Series L655D-S5050 I have a couple of issues, Ubuntu will not wake from suspend when closing the lid. It will show the Ubuntu screen then go to black and spit out some quick text before the screen will just flicker, as if trying to wake up. I've been googling around looking for a fix but nothing seems to help. Maybe it has something to do with the drivers? I checked additional drivers in the system settings, but it says there are no drivers present. Any ideas? Also, this issue isn't present all the time. But sometimes when I go to shutdown or restart Ubuntu, it will just loops to the login screen. Thank you, for any input or help! Also I can get some logs of these issues, but not really sure how to go about all of that. I'm not to familiar with ubuntu, as i've only been using the desktop version for a couple months now.

  Read the article

• mod_rewrite not working after upgrade to 12.10

  - by CrowderSoup

  I'm hoping this is a quick and simple fix and that I just need a fresh set of eyes. However, I'm fearful that it might actually be an error in the latest build of the rewrite module. I have a .htaccess file that turns on the rewrite engine (I've made sure the module is enabled), creates some rewrite conditions, and finally a rewrite rule. Here's my .htaccess file for reference: <IfModule mod_rewrite.c> RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php?request=$1 [L,QSA,NC] </IfModule> Now for the problem: if I go to hostname.com it works fine. If I go to hostname.com/Index it works fine. However, if I go to hostname.com/index it doesn't rewrite the request and I get a 404. I'm not sure what's going on here. I've used a rewrite rule tester and there doesn't appear to be any issues with my rewrite rule itself. Again, this issue didn't manifest until after I upgraded to 12.10, at which point I know that Apache was updated. Any thoughts? Has anyone else here experienced this? I know that two other people besides myself have experienced this here. Thanks in advance for any help you can provide!

  Read the article

• Jquery getJSON cross domain problems

  - by Charlie

  I cant seem to get my JSON file to work when pulling it in from another domain using JQuerys getJSON. I have placed the callback part at the end of the url but still have no joy. Firebug tells me its a cross domain issue, which seems to make sense as if I place the json file locally the below code (excluding the ?jsoncallback=? works fine) Heres the Jquery part $.getJSON("http://anotherdomain/js/morearticles.js?jsoncallback=?", function(json){ if (show5More.nextSetCount ' + this.titletext + '' + this.paratext + '').appendTo("#lineupswitch"); } else { $('' + this.titletext + '' + this.paratext + '').appendTo("#lineupswitch"); } }); return false; } }); } }); } And the JSON, which I have validated. { "items": [ [ { "href": "/edinburgh/video/news-090415-s2-squalor-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19721015001_asset-1239819553334.jpg?pubId=1486976045", "titletext": "Cannabis plants found in house with neglected children", "paratext": "A court has heard four young children lived in", "cname": "" }, { "href": "/edinburgh/video/news-090414-s2-waverley-station-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19537855001_asset-1239732920496.jpg?pubId=1486976045", "titletext": "Multi-million pound revamp for Waverley Station", "paratext": "Edinburgh's Waverley Station is set for a", "cname": "" }, { "href": "/edinburgh/video/news-s2-natal-20090408/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18948154001_asset-1239206353135.jpg?pubId=1486976045", "titletext": "Stillbirth charity on the road to raise awareness", "paratext": "SANDS Lothian are hoping to highlight their", "cname": "" }, { "href": "/edinburgh/video/news-090407-l2-rbs/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18827378001_asset-1239110600777.jpg?pubId=1486976045", "titletext": "Thousands of jobs to go at Royal Bank of Scotland", "paratext": "Edinburgh-based bank to cut 4,500 positions in the", "cname": "" }, { "href": "/edinburgh/video/news-090415-s2-squalor-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19721015001_asset-1239819553334.jpg?pubId=1486976045", "titletext": "1", "paratext": "A court has heard four young children lived in", "cname": "lastlineup" } ], [ { "href": "/edinburgh/video/news-090415-s2-squalor-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19721015001_asset-1239819553334.jpg?pubId=1486976045", "titletext": "1", "paratext": "A court has heard four young children lived in", "cname": "" }, { "href": "/edinburgh/video/news-090414-s2-waverley-station-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19537855001_asset-1239732920496.jpg?pubId=1486976045", "titletext": "2", "paratext": "Edinburgh's Waverley Station is set for a", "cname": "" }, { "href": "/edinburgh/video/news-s2-natal-20090408/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18948154001_asset-1239206353135.jpg?pubId=1486976045", "titletext": "Stillbirth charity on the road to raise awareness", "paratext": "3", "cname": "" }, { "href": "/edinburgh/video/news-090407-l2-rbs/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18827378001_asset-1239110600777.jpg?pubId=1486976045", "titletext": "Thousands of jobs to go at Royal Bank of Scotland", "paratext": "4", "cname": "" }, { "href": "/edinburgh/video/news-090407-l2-rbs/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18827378001_asset-1239110600777.jpg?pubId=1486976045", "titletext": "Thousands of jobs to go at Royal Bank of Scotland", "paratext": "Edinburgh-based bank to cut 4,500 positions in the", "cname": "lastlineup" } ] ] } { "items": [ [ { "href": "/edinburgh/video/news-090415-s2-squalor-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19721015001_asset-1239819553334.jpg?pubId=1486976045", "titletext": "Cannabis plants found in house with neglected children", "paratext": "A court has heard four young children lived in", "cname": "" }, { "href": "/edinburgh/video/news-090414-s2-waverley-station-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19537855001_asset-1239732920496.jpg?pubId=1486976045", "titletext": "Multi-million pound revamp for Waverley Station", "paratext": "Edinburgh's Waverley Station is set for a", "cname": "" }, { "href": "/edinburgh/video/news-s2-natal-20090408/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18948154001_asset-1239206353135.jpg?pubId=1486976045", "titletext": "Stillbirth charity on the road to raise awareness", "paratext": "SANDS Lothian are hoping to highlight their", "cname": "" }, { "href": "/edinburgh/video/news-090407-l2-rbs/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18827378001_asset-1239110600777.jpg?pubId=1486976045", "titletext": "Thousands of jobs to go at Royal Bank of Scotland", "paratext": "Edinburgh-based bank to cut 4,500 positions in the", "cname": "" }, { "href": "/edinburgh/video/news-090415-s2-squalor-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19721015001_asset-1239819553334.jpg?pubId=1486976045", "titletext": "1", "paratext": "A court has heard four young children lived in", "cname": "lastlineup" } ], [ { "href": "/edinburgh/video/news-090415-s2-squalor-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19721015001_asset-1239819553334.jpg?pubId=1486976045", "titletext": "1", "paratext": "A court has heard four young children lived in", "cname": "" }, { "href": "/edinburgh/video/news-090414-s2-waverley-station-edinburgh/", "thumbimg": "http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_19537855001_asset-1239732920496.jpg?pubId=1486976045", "titletext": "2", "paratext": "Edinburgh's Waverley Station is set for a", "cname": "" }, { "href": "/edinburgh/video/news-s2-natal-20090408/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18948154001_asset-1239206353135.jpg?pubId=1486976045", "titletext": "Stillbirth charity on the road to raise awareness", "paratext": "3", "cname": "" }, { "href": "/edinburgh/video/news-090407-l2-rbs/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18827378001_asset-1239110600777.jpg?pubId=1486976045", "titletext": "Thousands of jobs to go at Royal Bank of Scotland", "paratext": "4", "cname": "" }, { "href": "/edinburgh/video/news-090407-l2-rbs/", "thumbimg":"http://brightcove.vo.llnwd.net/d7/unsecured/media/1486976045/1486976045_18827378001_asset-1239110600777.jpg?pubId=1486976045", "titletext": "Thousands of jobs to go at Royal Bank of Scotland", "paratext": "Edinburgh-based bank to cut 4,500 positions in the", "cname": "lastlineup" } ] ] }

  Read the article

• PHP: Strange Date Problem

  - by Me-and-Coding

  Hi, I have two users in my database whose birth date is set to: 1985-01-26 And then i have function which when provided the users' date, tells how many days are left in the birthday. Here is the function: function retage($iy,$im,$id) { if(!empty($iy)>0 && intval($im)>0 && intval($id)>0) { $tdo=$iy.'-'.$im.'-'.$id; $tdc=date('Y').'-'.$im.'-'.$id; /*echo "<br/>";*/ $cd=date('Y-n-j'); /*echo "<br/>";*/ if(strtotime($tdc)>strtotime($cd))//coming { $ty=floor((strtotime($tdc)-strtotime($tdo))/(3600*24*365)); $td=floor((strtotime($tdc)-strtotime($cd))/(24*3600)); if($td==1) { $td=round((strtotime($tdc)-strtotime($cd))/(24*3600)).' day to go'; } else { $td=round((strtotime($tdc)-strtotime($cd))/(24*3600)).' days to go'; } $ty='<font color="#C7C5C5">is turning '.$ty.' on <br>'.date('M jS Y',strtotime($tdc)).'</font>'; //return 'is turning '.$ty.' on '.$tdc; } elseif(strtotime($tdc)<strtotime($cd))//past { $ty=floor((strtotime($tdc)-strtotime($tdo))/(3600*24*365)); if($ty>0) { //$td='gone '.floor((strtotime($cd)-strtotime($tdc))/(24*3600)).' days ago'; $ndays=floor((strtotime($cd)-strtotime($tdc))/(24*3600)); if($ndays==1) $td=' gone '.round((strtotime($cd)-strtotime($tdc))/(24*3600)).' day ago'; else $td=' gone '.round((strtotime($cd)-strtotime($tdc))/(24*3600)).' days ago'; $ty='<font color="#C7C5C5">had turned '.$ty.' on <br>'.date('M jS Y',strtotime($tdc)).'</font>'; //return 'had turned '.$ty.' on '.$tdc; } else { $tdc=(date('Y')+1).'-'.$im.'-'.$id; $ty=floor((strtotime($tdc)-strtotime($tdo))/(3600*24*365)); //$td=floor((strtotime($tdc)-strtotime($cd))/(24*3600)).' days to go'; $td=floor((strtotime($tdc)-strtotime($cd))/(24*3600)); if($td==1) { $td=round((strtotime($tdc)-strtotime($cd))/(24*3600)).' day to go'; } else { $td=round((strtotime($tdc)-strtotime($cd))/(24*3600)).' days to go'; } $ty='<font color="#C7C5C5">is turning '.$ty.' on <br>'.date('M jS Y',strtotime($tdc)).'</font>'; //return 'is turning '.$ty.' on '.$tdc; } } else//today { $ty=floor((strtotime($tdc)-strtotime($tdo))/(3600*24*365)); if($ty>0) { $td='today'; $ty='<font color="#C7C5C5">has turned <br>'.$ty.' on today </font>'; //return 'has turned '.$ty.' on today'; } else { $ty='<font color="#C7C5C5">today</font>';$td=''; //return ''; } } } else { $ty='';$td=''; //return ''; } $ta[0]=$ty; $ta[1]=$td ; return $ta; } I use below code to show the days remaining: while($rs=mysql_fetch_array($result)) { if (isset($rs['byear'],$rs['bmonth'],$rs['bdate'])) { $tmptxt = retage($rs['byear'],$rs['bmonth'],$rs['bdate']); echo $tmptxt[1]; } } The strange thing is that for one user, the days remaining is shown correctly eg: gone 120 days ago And for other user having same birth date, this is shown: Jan 1st 1970 -14755 days to go Strange: When I use the same function outside of the loop and test with date 1985-01-26, the correct result is shown. Note: You can check out the function for yourself. Could you please tell what could be wrong there, your help will be highly appreciated. Thanks.

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >