Search Results

Search found 13288 results on 532 pages for 'high speed'.

Page 72/532 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Are high office partitions as effective as private offices?

  - by CraigS

  I'm currently reading DeMarco and Lister's Peopleware, and I've been struck (as everyone is) by their comments about noise reduction via using private offices, and the effect this has on productivity. Private offices are probably not going to happen at my workplace, but I'm wondering if high cubicle partitions (say, 6 feet) might be nearly as good? I imagine they wouldn't deflect quite as much noise, but they would have some effect. One down-side is that the center cubicles would have less natural light. That seems quite a big downer to me. I'd be interested to hear what peoples experiences are.

  Read the article

• Adwords: Is there a drawback to setting a really high CPC to learn what works faster?

  - by Rob Sobers

  I'm toying with increasing my max CPC really high on all my keywords so ensure my ad gets shown in the top spot on page one in order to draw more clicks. I think this will be a good way to quickly figure out whether the ads I'm writing have a decent CTR and, more importantly, whether the landing pages I'm building are converting. Since I can set a max daily budget for my campaign, I won't risk breaking the bank. I can't think of any drawbacks, personally. Am I missing any?

  Read the article

• Is it possible to get a job in a high-demand company without having hobby projects?

  - by Rachel

  I was curious if the recruitment team at high-demand companies such as Google takes a lack of hobby projects into consideration when evaluating candidates. I'm a straight 40 hour/week programmer, who is lucky to spend an hour or two a month outside of work on anything programming related. I love hanging out on SO/SE during my breaks at work, and love answering questions, but after work I leave the programming world and go back to my life. I already understand that you don't need hobby projects to be a good programmer, but does this lack of hobby projects affect my chances getting a job at a company that always has a long list of candidates trying to get in?

  Read the article

• How do you get a high paying job programming in finance?

  - by q303

  Hi, I'm interested in eventually programming for a financial company. Unfortunately, I have a degree in linguistics with a minor in CS along with 4 years experience in .NET. I picked .NET because I thought that it would be more used in the financial world. I've heard some horror stories about badly done VBA Excel programming and being way underpaid...but then I've heard great stories about highly skilled C++ programming along with high pay (including some feedback to previous questions). I just get the impression that unless you have a MS in CS from a top 10/20 school, it might not be realistic. For those of you doing programming for bankers/traders, how did you break in?

  Read the article

• Q&amp;A: Where does high performance computing fit with Windows Azure?

  - by Eric Nelson

  Answer I have been asked a couple of times this year about taking compute intensive operations to Windows Azure and/or High Performance Computing on Windows Azure. It is an interesting (if slightly niche) area. The good news is we have a great paper from David Chappell on HPC Server and Windows Azure integration. As a taster: A SOA application running entirely on Windows Azure runs its WCF services in Azure Worker nodes. Download now Related Links: Other Q&A posts on my team blog Don’t forget to connect with the UK team if you stumbled across this post by accident/bing/google

  Read the article

• How do I turn off nVidia high performance mode?

  - by gpen06

  I am new to Ubuntu 11.10 and never touched linux until today. I installed Ubuntu alongside with Windows 7. I have an issue with my laptop overheating and freezing when it uses the high performance GPU graphics mode (hybrid card). It is an easy fix for Windows 7. I simply set the graphics mode manually to the low performance integrated graphics (save power) mode using advanced power settings. In Ubuntu, I'm stumped at how to do this. When using Ubuntu, my laptop is showing the same symptoms as it did without the fix for Windows. I have the nVidia graphics driver installed for Windows which allows me to see which mode I am in. I downloaded it off of my laptop's website (ASUS). They do not offer driver downloads for linux. Screenshot of power settings in Windows 7

  Read the article

• After upgrade my webcam mic records fast, high pitched, and squeaky only in Skype (maybe Sound Recorder problem too)

  - by Dennis

  After an upgrade to 11.10 which probably also updated Skype to 2.2.35 (not sure because I never checked the version before) the sound that comes back from an echo test is very high pitched and squeaky. I'm not sure if when in a call if the other person can't hear or just doesn't know what they are hearing. I am using a USB Logitech C250 Audacity records fine, gmail video chat works fine, but if I start sound recorder I get a "Could not negotiate format", followed by "Could not get/set settings from/on resource". I don't know if this is a Skype problem or a wider Pulse problem. My only real needs are the gmail and Audacity, though I have a couple of contacts that I can only Skype with.

  Read the article

• How can I improve these online java programming puzzles I wrote for my (middle/high school) students?

  - by Arcymag

  I'm teaching some middle and high school students programming right now, and I found that some of them really liked online programming puzzles. So I created http://www.kapparate.com/coder/ , and right now there's 4 categories of puzzles. All the puzzles are set up right now so that variables are pre-initialized, and the user plugs in some code in the middle. For example, the problem might say these are pre-initialized: int x = ????; int y = ????; int z; and then the program might ask the student to write the final line of code: z = x + y;. Now I know I could go a long way in improving the usability of this site (like having an area that lists the pre-defined variables), but I was wondering if this concept seems sound. I know some sites have kids fill in functions, but not all of my students know what functions are yet, and I'm trying to introduce online programming puzzles before that.

  Read the article

• High number of ethernet errors. Tool for testing the ethernet card?

  - by Fabio Dalla Libera

  I have an Asus Sabertooth X79. I often get corrupted files. I checked the RAM, but memtest finds no errors. To avoid the possibility of disk errors, I tried copying the files to tmpfs. If I copy from the network, I get md5sum mismatches about once every 10 times using a 6Gb file. Copying from RAM to RAM, I didn't get mismatches. I get a very high number of errors in ifconfig (compared to others PCs I just took as reference, which have 0 with much more traffic). Here is an example RX packets:13972848 errors:200 dropped:0 overruns:0 frame:101 The motherboard is new, but do you think there're some problems with it? What could I use to test the (integrated) network adapter? What else do you think I should double check? --edit-- I tried another NIC, it gives a lot of Corrupted MAC on Input. Disconnecting: Packet corrupt lost connection. I noticed that another PC downloads at 11.1MB/s without problems. This pc at 66.0 MB/s. Is there any way to try to limit the speed?

  Read the article

• How can I move along an angled collision at a constant speed?

  - by Raven Dreamer

  I have, for all intents and purposes, a Triangle class that objects in my scene can collide with (In actuality, the right side of a parallelogram). My collision detection and resolution code works fine for the purposes of preventing a gameobject from entering into the space of the Triangle, instead directing the movement along the edge. The trouble is, the maximum speed along the x and y axis is not equivalent in my game, and moving along the Y axis (up or down) should take twice as long as an equivalent distance along the X axis (left or right). Unfortunately, these speeds apply to the collision resolution too, and movement along the blue path above progresses twice as fast. What can I do in my collision resolution to make sure that the speedlimit for Y axis movement is obeyed in the latter case? Collision Resolution for this case below (vecInput and velocity are the position and velocity vectors of the game object): // y = mx+c lowY = 2*vecInput.x + parag.rightYIntercept ; ... else { // y = mx+c // vecInput.y = 2(x) + RightYIntercept // (vecInput.y - RightYIntercept) / 2 = x; //if velocity.Y (positive) greater than velocity.X (negative) //pushing from bottom, so push right. if(velocity.y > -1*velocity.x) { vecInput = new Vector2((vecInput.y - parag.rightYIntercept)/2, vecInput.y); Debug.Log("adjusted rightwards"); } else { vecInput = new Vector2( vecInput.x, lowY); Debug.Log("adjusted downwards"); } }

  Read the article

• Why does my game loop speed vary on different platforms with the same hardware?

  - by Sri Harsha Chilakapati

  I've got a serious issue with my game loop. This loop varies in time with the platform and with the same hardware. This is a list of FPS achieved: - Windows ======= 140 to 150 - Linux ======= 120 to 125 - Windows(WINE) ======= 125 to 135 And since my game loop is fixed timestep, the speed of the game is not stable. Here's my game loop. public final void run() { // Initialize the resources Map.initMap(); initResources(); // Start the timer GTimer.startTimer(); GTimer.refresh(); long elapsedTime = 0; // The game loop while (running) { // Update the game update(elapsedTime); if (state == GameState.GAME_PLAYING) { Map.updateObjects(elapsedTime); } // Show or hide the cursor if (Global.HIDE_CURSOR) { setCursor(GInput.INVISIBLE_CURSOR); } else { setCursor(Cursor.getDefaultCursor()); } // Repaint the game and sync repaint(); elapsedTime = GTimer.sync(); Toolkit.getDefaultToolkit().sync(); } } The timer package How could I improve it?

  Read the article

• Japanese Multiplication simulation - is a program actually capable of improving calculation speed?

  - by jt0dd

  On SuperUser, I asked a (possibly silly) question about processors using mathematical shortcuts and would like to have a look at the possibility at the software application of that concept. I'd like to write a simulation of Japanese Multiplication to get benchmarks on large calculations utilizing the shortcut vs traditional CPU multiplication. I'm curious as to whether it makes sense to try this. My Question: I'd like to know whether or not a software math shortcut, as described above is actually a shortcut at all. This is a question of programming concept. By utilizing the simulation of Japanese Multiplication, is a program actually capable of improving calculation speed? Or am I doomed from the start? The answer to this question isn't required to determine whether or not the experiment will succeed, but rather whether or not it's logically possible for such a thing to occur in any program, using this concept as an example. My theory is that since addition is computed faster than multiplication, a simulation of Japanese multiplication may actually allow a program to multiply (large) numbers faster than the CPU arithmetic unit can. I think this would be a very interesting finding, if it proves to be true. If, in the multiplication of numbers of any immense size, the shortcut were to calculate the result via less instructions (or faster) than traditional ALU multiplication, I would consider the experiment a success.

  Read the article

• How to limit speed with BMW JSDK on 116i?

  - by lexicore

  I'm experimenting with the BMW Java SDK on the new BMW 116i Innovation Package. Basic things like turning the lights on and off, starting and stopping the motor work fine. What I'm trying to do now is that to write a carlet which would limit the speed to the maximum configured in the driver profile. Driver identity will be detected as usual via RFID reader. My problem is that though I can read the speed from the tachometer, I can't really limit the speed. Here's what I've got working so far: public class SpeenControllingCarlet extends GenericCarlet { public void start(final VehicleModel model) throws CarletException { RfidReader rfidReader = (RfidReader) model .getDevice(Devices.DRIVER_RFID_READER); Rfid rfid = rfidReader.getRfid(); DriverProfile driverProfile = model.getDriverProfileRegistry() .getDriverProfile(rfid.toString()); if (driverProfile == null) { return; } final Double maxAllowedSpeed = Double.valueOf(driverProfile .getCustomAttribute("maxAllowedSpeed", "190")); Tachometer tachometer = (Tachometer) mode.getDevice(Devices.TACHOMETER); tachometer.addSpeedListener(new SpeedListener() { public void onSpeedChanged(SpeedChangedEvent speedChangedEvent) { if (speedChangedEvent.getCurrentSpeed() > maxAllowedSpeed) { Horn horn = (Horn) mode.getDevice(Devices.HORN); horn.beep(440, 2000); } } }); } } This will just beep for two seconds if the driver goes faster than the driver profile allows. My question is - is there a possibility to actually limit the speed (not just silly beeping)?

  Read the article

• How can Agile methodologies be adapted to High Volume processing system development?

  - by luckyluke

  I am developing high volume processing systems. Like mathematical models that calculate various parameters based on millions of records, calculated derived fields over milions of records, process huge files having transactions etc... I am well aware of unit testing methodologies and if my code is in C# I have no problem in unit testing it. Problem is I often have code in T-SQL, C# code that is a SQL stored assembly, and SSIS workflow with a good amount of logic (and outcomes etc) or some SAS process. What is the approach YOu use when developing such systems. I usually develop several tests as Stored procedures in a designed schema(TEST) and then automatically run them overnight and check out the results. But this is only for T-SQL. And Continous integration IS hard. But the problem is with testing SSIS packages. How do You test it? What is Your preferred approach for stubbing data into tables (especially if You need a lot data initialization). I have some approach derived over the years but maybe I am just not reading enough articles. So Banking, Telecom, Risk developers out there. How do You test your mission critical apps that process milions of records at end day, month end etc? What frameworks do You use? How do You validate that Your ssis package is Correct (as You develop it)/ How do You achieve continous integration in such an environment (Personally I never got there)? I hope this is not to open-ended question. How do You test Your map-reduce jobs for example (i do not use hadoop but this is quite similar). luke Hope that this is not too open ended

  Read the article

• High-level description of how experimental C++ features are developed?

  - by Praxeolitic

  Herb Sutter in a video answers a question about the concepts proposal considered for C++11 and from his remarks it sounds like multiple groups offered prototype implementations but all of them left concerns about slow compile times. The comment surprised me because it suggests that, at least in some cases, the prototypes being developed are not just proofs of concept -- they're even expected to perform. All the work that must take has me curious. For mature languages, especially C++, how are experimental language features developed? Is it much different from developing a compiler that implements a standard? Does a developer have a sense of if it will work and perform or even if it ever could? What are the most time consuming parts and are any parts surprisingly easier than one might expect? The question is not what does the C++ standards committee do, but rather the part that comes before. When an experimental implementation for a proposal is being put together and there aren't any completely solidified rules, how is the sausage made? I'm not a professional compiler developer nor do I expect answers with step by step accounts. I'd like a high-level idea of how this would be done or if there are any general patterns at all. I don't know what to expect from the answers but even if there are no rules to the process and the small number of people who do this just cowboy it and then, for stuff that worked out, write up the "official version" as a proposal, that answer would still be informative.

  Read the article

• How to get wireless (Alfa) operate in full power and speed up wireless Internet?

  - by MahboobeAlam

  I am using Wireless to connect to the internet (router). My laptop has Atheros wireless (AR 242x/542x) adapter but the router is a little bit far-away from my room so I have to use an external wireless adapter i.e. Alfa (Realtek 8187) for connectivity. However, since I have started using Ubuntu I noticed that Alfa is not working in full power, internet speed in Ubuntu is much slower than in Windows on my laptop. When I am using Windows 7 the LED (bulb) on Alfa blinks as it should, but when in Ubuntu, it doesn't blink rather it is on but very dim. Connection using Atheros adapter is also the same (slow)... I have tried 4 methods (I found on the Internet) to troubleshoot this matter but no success. It seems to me that Ubuntu/Linux is not letting these wireless adapters to operate in full strength. iwconfig shows that power management is off for both. So what's the problem? Details: ifconfig eth0 Link encap:Ethernet HWaddr 00:1f:16:1e:36:ec UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:45 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1657 errors:0 dropped:0 overruns:0 frame:0 TX packets:1657 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:241697 (241.6 KB) TX bytes:241697 (241.6 KB) wlan0 Link encap:Ethernet HWaddr 00:22:5f:9b:24:b5 inet6 addr: fe80::222:5fff:fe9b:24b5/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:715460 errors:0 dropped:0 overruns:0 frame:0 TX packets:694246 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:493539292 (493.5 MB) TX bytes:235159393 (235.1 MB) wlan1 Link encap:Ethernet HWaddr 00:c0:ca:42:14:62 inet addr:192.168.100.102 Bcast:192.168.100.255 Mask:255.255.255.0 inet6 addr: fe80::2c0:caff:fe42:1462/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:171053 errors:0 dropped:0 overruns:0 frame:0 TX packets:181363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:74094659 (74.0 MB) TX bytes:59474204 (59.4 MB) iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off wlan1 IEEE 802.11bg ESSID:"Zia" Mode:Managed Frequency:2.412 GHz Access Point: 00:0D:F0:9C:A6:18 Bit Rate=54 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-31 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:204 Invalid misc:6610 Missed beacon:0

  Read the article

• Does OO, TDD, and Refactoring to Smaller Functions affect Speed of Code?

  - by Dennis

  In Computer Science field, I have noticed a notable shift in thinking when it comes to programming. The advice as it stands now is write smaller, more testable code refactor existing code into smaller and smaller chunks of code until most of your methods/functions are just a few lines long write functions that only do one thing (which makes them smaller again) This is a change compared to the "old" or "bad" code practices where you have methods spanning 2500 lines, and big classes doing everything. My question is this: when it call comes down to machine code, to 1s and 0s, to assembly instructions, should I be at all concerned that my class-separated code with variety of small-to-tiny functions generates too much extra overhead? While I am not exactly familiar with how OO code and function calls are handled in ASM in the end, I do have some idea. I assume that each extra function call, object call, or include call (in some languages), generate an extra set of instructions, thereby increasing code's volume and adding various overhead, without adding actual "useful" code. I also imagine that good optimizations can be done to ASM before it is actually ran on the hardware, but that optimization can only do so much too. Hence, my question -- how much overhead (in space and speed) does well-separated code (split up across hundreds of files, classes, and methods) actually introduce compared to having "one big method that contains everything", due to this overhead? UPDATE for clarity: I am assuming that adding more and more functions and more and more objects and classes in a code will result in more and more parameter passing between smaller code pieces. It was said somewhere (quote TBD) that up to 70% of all code is made up of ASM's MOV instruction - loading CPU registers with proper variables, not the actual computation being done. In my case, you load up CPU's time with PUSH/POP instructions to provide linkage and parameter passing between various pieces of code. The smaller you make your pieces of code, the more overhead "linkage" is required. I am concerned that this linkage adds to software bloat and slow-down and I am wondering if I should be concerned about this, and how much, if any at all, because current and future generations of programmers who are building software for the next century, will have to live with and consume software built using these practices. UPDATE: Multiple files I am writing new code now that is slowly replacing old code. In particular I've noted that one of the old classes was a ~3000 line file (as mentioned earlier). Now it is becoming a set of 15-20 files located across various directories, including test files and not including PHP framework I am using to bind some things together. More files are coming as well. When it comes to disk I/O, loading multiple files is slower than loading one large file. Of course not all files are loaded, they are loaded as needed, and disk caching and memory caching options exist, and yet still I believe that loading multiple files takes more processing than loading a single file into memory. I am adding that to my concern.

  Read the article

• question about mergesort

  - by davit-datuashvili

  i have write code on mergesort here is code public class mergesort{ public static int a[]; public static void merges(int work[],int low,int high){ if (low==high) return ; else{ int mid=(low+high)/2; merges(work,low,mid); merges(work,mid+1,high); merge(work,low,mid+1,high); } } public static void main(String[]args){ int a[]=new int[]{64,21,33,70,12,85,44,99,36,108}; merges(a,0,a.length-1); for (int i=0;i<a.length;i++){ System.out.println(a[i]); } } public static void merge(int work[],int low,int high,int upper){ int j=0; int l=low; int mid=high-1; int n=upper-l+1; while(low<=mid && high<=upper) if ( a[low]<a[high]) work[j++]=a[low++]; else work[j++]=a[high++]; while(low<=mid) work[j++]=a[low++]; while(high<=upper) work[j++]=a[high++]; for (j=0;j<n;j++) a[l+j]=work[j]; } } but it does nort work after compile this code here is mistake java.lang.NullPointerException at mergesort.merge(mergesort.java:45) at mergesort.merges(mergesort.java:12) at mergesort.merges(mergesort.java:10) at mergesort.merges(mergesort.java:10) at mergesort.merges(mergesort.java:10) at mergesort.main(mergesort.java:27)

  Read the article

• apache2 + mod_fastcgi + suexec + php5.2 = unstable on high load...

  - by redguy..pl

  I am hosting several (~30) different sites on one server with apache2+fastcgi+suexec+php5. Sites have different loads and different execution times of their scripts (some of them process request for 5-7 seconds, some <1sek). Sometimes when single site receives very high load (all php instances of this site are created and used) - whole apache server hangs. Apache (worker mpm) creates new processes up to the upper limit. It looks like it is starting to queue ALL new request for EVERY site, not only the one that has high load and quickly achieves process limits... restart of apache solves the problem... config: FastCgiConfig -singleThreshold 1 -multiThreshold 10 -listen-queue-depth 30 -maxProcesses 80 -maxClassProcesses 12 -idle-timeout 30 -pass-header HTTP_AUTHORIZATION -pass-header If-Modified-Since -pass-header If-None-Match (earlier have default -listen-queue-depth = 100, but it didn't change anything...) Any suggestions? Another question - how is implemented this listen queue? is it one queue for whole apache, or unique queue for every defined php apllication (suexec site)? I would like to achieve something like this: when one site receives high load and its queue is full - server bounces next request, but only for this one site.. Other sites should work properly...

  Read the article

• Very high-pitched noise when computer does something intense?

  - by Starkers

  "Intense" is the best word I can use to describe it because I'm not sure what it is, whether it's RAM, GPU or CPU. If I pan the camera in unity: A high pitched noise issues from the computer. The picosecond I start panning the sound starts. Stops the picosecond I stop panning. If I start an infinite loop: 2.0.0p247 :016 > x = 1 => 1 2.0.0p247 :017 > while x < 2 do 2.0.0p247 :018 > puts 'huzzah!' 2.0.0p247 :019?> end huzzah! huzzah! huzzah! An identical high pitched noise can be heard. I don't think it's the GPU due to this simple experiment. Or any monitor-weirdness (although the sound does sound like one of those old CRT monitors if you're old enough to be young when those things were about) The CPU? Or maybe my SSD? It's my first SSD and the first time I've heard this noise. Should I be worried? Regardless, what's causing this sound? I can't think what would cause such high frequency vibrations. I built the PC myself. Not enough heat paste on the CPU? Too much? Just no idea what's going on. Info: CPU Type QuadCore Intel Core i5-3570K, 3800 MHz (38 x 100) Motherboard Name Asus Maximus V Extreme Flash Memory Type Samsung 21nm TLC NAND Video Adapter Asus HD7770

  Read the article

• How does a hard drive compare to Flash memory working as a hard drive in terms of speed?

  - by Jian Lin

  Some experiment I did with hard drive read/write speed was 10MB/s write and 40MB/s read, and with a USB Flash drive, it can be 5MB/s write and 10MB/s read. Also, if I put a virtual hard drive .vhd file in a hard drive or in a USB Flash drive and try a Virtual Machine using it, the one using the hard drive is quite fast, while the one using the USB Flash drive is close to not usable. So I wonder some early netbooks use 4GB or 8GB flash memory as the hard drive, and even the Apple Mac Air has an option of using flash memory instead of a hard drive. But in those situation, will the speed be slower than using a hard drive, like in the case of a USB Flash drive?

  Read the article

• SQL SERVER – Speed Up! – Parallel Processes and Unparalleled Performance – TechEd 2012 India

  - by pinaldave

  TechEd India 2012 is just around the corner and I will be presenting there on two different session. SQL Server Performance Tuning is a very challenging subject that requires expertise in Database Administration and Database Development. I always have enjoyed talking about SQL Server Performance tuning subject. Just like doctors I like to call my every attempt to improve the performance of SQL Server queries and database server as a practice too. I have been working with SQL Server for more than 8 years and I believe that many of the performance tuning concept I have mastered. However, performance tuning is not a simple subject. However there are occasions when I feel stumped, there are occasional when I am not sure what should be the next step. When I face situation where I cannot figure things out easily, it makes me most happy because I clearly see this as a learning opportunity. I have been presenting in TechEd India for last three years. This is my fourth time opportunity to present a technical session on SQL Server. Just like every other year, I decided to present something different, something which I have spend years of learning. This time, I am going to present about parallel processes. It is widely believed that more the CPU will improve performance of the server. It is true in many cases. However, there are cases when limiting the CPU usages have improved overall health of the server. I will be presenting on the subject of Parallel Processes and its effects. I have spent more than a year working on this subject only. After working on various queries on multi-CPU systems I have personally learned few things. In coming TechEd session, I am going to share my experience with parallel processes and performance tuning. Session Details Title: Speed Up! – Parallel Processes and Unparalleled Performance (Add to Calendar) Abstract: “More CPU More Performance” – A  very common understanding is that usage of multiple CPUs can improve the performance of the query. To get maximum performance out of any query – one has to master various aspects of the parallel processes. In this deep dive session, we will explore this complex subject with a very simple interactive demo. An attendee will walk away with proper understanding of CX_PACKET wait types, MAXDOP, parallelism threshold and various other concepts. Date and Time: March 23, 2012, 12:15 to 13:15 Location: Hotel Lalit Ashok - Kumara Krupa High Grounds, Bengaluru – 560001, Karnataka, India. Add to Calendar Please submit your questions in the comments area and I will be for sure discussing them during my session. If I pick your question to discuss during my session, here is your gift I commit right now – SQL Server Interview Questions and Answers Book. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology Tagged: TechEd, TechEdIn

  Read the article

• How to compare speed of graphics cards in Windows desktop environment?

  - by Al Kepp

  I use Windows 7 and Intel Core i3 CPU with integrated graphics. My problem is that it eats valuable system RAM for display. I can replace it with an old PCIe Radeon X700, so all system RAM will be usable for applications. The question is if an old Radeon X700 is comparable in W7 desktop speed to a new integrated i3 graphics. Are there any test programs which compare the speed of graphic cards in Windows 7 desktop environment (i.e. no Direct3D games, just Windows desktop)? (According to Tomshardware, Radeon X700 is probably even faster than Core i3 in 3D. But there are no native WDDM 1.1 W7 drivers for X700, only WDDM 1.0 Vista drivers are available.)

  Read the article

• Rough estimate for speed advantage of SAN-via-fibre to san-via-iSCSI when using VMware vSphere

  - by Dirk Paessler

  We are in the process of setting up two virtualization servers (DELL R710, Dual Quadcore Xeon CPUs at 2.3 Ghz, 48 GB RAM) for VMware VSphere with storage on a SAN (DELL Powervault MD3000i, 10x 500 GB SAS drives, RAID 5) which will be attached via iSCSI on a Gbit Ethernet Switch (DELL Powerconnect 5424, they call it "iSCSI-optimized"). Can anyone give an estimate how much faster a fiber channel based solution would be (or better "feel")? I don't mean the nominal speed advantage, I mean how much faster will virtual machines effectively work? Are we talking twice the speed, five times, 10 times faster? Does it justify the price? PS: We are not talking about heavily used database servers or exchange servers. Most of the virtualized servers run below 3-5% average CPU load.

  Read the article

• SQL SERVER – #TechEdIn – Presenting Tomorrow on Speed Up! – Parallel Processes and Unparalleled Performance at TechEd India 2012

  - by pinaldave

  Performance tuning is always a very hot topic when it is about SQL Server. SQL Server Performance Tuning is a very challenging subject that requires expertise in Database Administration and Database Development. I always have enjoyed talking about SQL Server Performance tuning subject. However, in India, it’s actually the very first time someone is presenting on this interesting subject, so this time I had the biggest challenge to present this session. Frequently enough, we get these two kind of questions: How to turn off parallelism as it is reducing performance? How to turn on parallelism as I want more performance? The reality is that not everyone knows what exactly is needed by their system. In this session, I have attempted to answer this very question. I’ve decided to provide a balanced view but stay away from theory, which leads us to say “It depends”. The session will have a clear message about this towards its end. Deck Details Slides: 45+ Demos: 7+ Bonus Quiz: 5 Images: 10+ Session delivery time: 52 Mins + 8 Mins of Q & A I have presented this session a couple of times to my friends and so far have received good feedback. Oftentimes, when people hear that I am going to present 45 slides, they all say it is too much to cover. However, when I am done with the session the usual reaction is that I truly gave justice to those slides. Action Item Here are a few of the action items for all of those who are going to attend this session: If you want to attend the session, just come early. There’s a good chance that you may not get a seat because right before me, there is a session from SQL Guru Vinod Kumar. He performs a powerful delivery of million concepts in just a little time. Quiz. I will be asking few questions during the session as well as before the session starts. If you get the correct answer, I will give unique learning material for you. You may not want to miss this learning opportunity at any cosst. Session Details Title: Speed Up! – Parallel Processes and Unparalleled Performance (Add to Calendar) Abstract: “More CPU, More Performance” – A  very common understanding is that usage of multiple CPUs can improve the performance of the query. To get a maximum performance out of any query, one has to master various aspects of the parallel processes. In this deep-dive session, we will explore this complex subject with a very simple interactive demo. Attendees will walk away with proper understanding of CX_PACKET wait types, MAXDOP, parallelism threshold and various other concepts. Date and Time: March 23, 2012, 12:15 to 13:15 Location: Hotel Lalit Ashok - Kumara Krupa High Grounds, Bengaluru – 560001, Karnataka, India. Add to Calendar Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Interview Questions and Answers, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >