Search Results

Search found 46908 results on 1877 pages for 'managing files and folder'.

Page 72/1877 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Deploying, but without those pesky test files!

  - by Chris Skardon

  Silverlight testing is great, we all know that (don’t we??), we’re expected to do it as part of the development process, but once we’ve got an awesome application written and we come to deploy it, we don’t want the test files going out with it… You might be like me, have the files in a Web project – let’s face it, that’s how we’re pushed into doing it… So let’s stick with it! Now. I’m deploying via the wonders of the Web Deployment shizzle, but this also applies to the classic ‘installer’ project as well.. Baaaasically, we’re going to use the ‘Debug’ / ‘Release’ configurations to include given files. ?? OK, you know in the top of your visual studio editor, you (usually) have a drop down which predominantly reads ‘Debug’? Those are ‘configurations’. Mostly we don’t bother changing it, primarily due to laziness, but also the fact that we generally don’t see ‘Release’ as actually doing anything other than making it harder to find problems :) Well today my friends we’re going to change that bad boy… The next few steps are just helping you set up a new ‘Debug’ configuration, but you can just switch to the ‘Release’ configuration and skip to the end… First let’s go to the Configuration Manager. There are multiple ways, through the ‘Build’ menu (at the bottom), or via the drop down which currently has ‘Debug’ in it :) Got it? Select ‘New’ from the ‘Active solution configuration’ drop down: Create a new configuration, kind of like the picture below shows (or for those graphically challenged – Name: DebugWithNoTests, and Copy settings from: ‘Debug’, ensuring the ‘Create new project configurations’ checkbox is checked). Press OK. VS will do some shizzle, and in the Configuration manager, you will see pretty much exactly what you did before, only with ‘Debug’ replaced with ‘DebugWithNoTests’. Turn off the build options for the test projects. We won’t need them.. IF you skipped down from the top, this is where you’ll be wanting to stop!!! Close and now we’re one notepad step away from achieving our goals. Yes, I said notepad. You can’t do what we’re going to do in VS. (Pity). Go to the folder where your web project is, and right click on the ‘.csproj’ file. Now open it with notepad. Head on down to the ‘<Content Include’ bits, they’ll look like this: <ItemGroup> <Content Include="ClientBin\Tests.xap" /> ... </ItemGroup> Take this and modify each of the files you don’t want deployed and change to: <Content Include="ClientBin\Tests.xap" Condition="'$(Configuration)' == 'Debug'" /> Once you’ve got that sorted publish your project, once with the Debug configuration selected, and another with any other configuration (‘Release’, ‘DebugWithNoTests’ etc).. No files! Huzzah!

  Read the article

• Injection of banners in my webbrowsers possible malware

  - by Skadlig

  Recently I have started to suspect that I have some kind of virus on my computer. There are 3 symptoms: Banners are being displayed on pages that doesn't use commercials, for instance when viewing screen-shots on Steam. It is only displayed after the rest of the page has been loaded and seems to be injected into it. The whole page is replaced with a commercial with the option to skip the commercial. The page is replaced with a search window claiming that the page could not be found. I have tried to scan my computer with Antivir and Adaware but only found a couple of tracking cookies. I have run HijackThis but since this isn't really my area I haven't been able to discern what shouldn't be there except the line about zonealarm since I have uninstalled it. Is there anyone out there who is able to see if there is anything suspicious in the log-file at the end or has suggestions regarding programs that might be better to find the virus than Antivir and Adaware? Here is the whole (long) log: Logfile of Trend Micro HijackThis v2.0.2 Scan saved at 21:44:07, on 2010-04-15 Platform: Unknown Windows (WinNT 6.01.3504) MSIE: Internet Explorer v8.00 (8.00.7600.16385) Boot mode: Normal Running processes: C:\Windows\SysWOW64\HsMgr.exe C:\Program Files (x86)\Personal\bin\Personal.exe F:\Program Files (x86)\Apache Software Foundation\Apache2.2\bin\ApacheMonitor.exe C:\Program Files (x86)\Avira\AntiVir Desktop\avgnt.exe F:\Program Files (x86)\PowerISO\PWRISOVM.EXE C:\Program Files (x86)\Java\jre6\bin\jusched.exe C:\Program Files\ASUS Xonar DX Audio\Customapp\ASUSAUDIOCENTER.EXE F:\Program Files (x86)\Voddler\service\VNetManager.exe C:\Program Files (x86)\Emotum\Mobile Broadband\Mobile.exe F:\Program Files\Logitech\SetPoint\x86\SetPoint32.exe C:\Program Files (x86)\Lavasoft\Ad-Aware\AAWTray.exe F:\Program Files (x86)\Mozilla Firefox\firefox.exe F:\Program Files (x86)\Trend Micro\HijackThis\HijackThis.exe R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157 R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch = R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Local Page = C:\Windows\SysWOW64\blank.htm R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName = F2 - REG:system.ini: UserInit=userinit.exe O2 - BHO: AcroIEHelperStub - {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:\Program Files (x86)\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll O2 - BHO: gwprimawega - {83bb5261-81ec-25ae-4adf-e88936738525} - C:\Windows\SysWow64\aZfJupUw.dll O2 - BHO: ZoneAlarm Toolbar Registrar - {8A4A36C2-0535-4D2C-BD3D-496CB7EED6E3} - C:\Program Files\CheckPoint\ZAForceField\WOW64\TrustChecker\bin\TrustCheckerIEPlugin.dll (file missing) O2 - BHO: Windows Live inloggningshjälpen - {9030D464-4C02-4ABF-8ECC-5164760863C6} - C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live\WindowsLiveLogin.dll O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files (x86)\Java\jre6\bin\jp2ssv.dll O3 - Toolbar: ZoneAlarm Toolbar - {EE2AC4E5-B0B0-4EC6-88A9-BCA1A32AB107} - C:\Program Files\CheckPoint\ZAForceField\WOW64\TrustChecker\bin\TrustCheckerIEPlugin.dll (file missing) O4 - HKLM..\Run: [avgnt] "C:\Program Files (x86)\Avira\AntiVir Desktop\avgnt.exe" /min O4 - HKLM..\Run: [PWRISOVM.EXE] f:\Program Files (x86)\PowerISO\PWRISOVM.EXE O4 - HKLM..\Run: [SunJavaUpdateSched] "C:\Program Files (x86)\Java\jre6\bin\jusched.exe" O4 - HKLM..\Run: [QuickTime Task] "F:\Program Files (x86)\QuickTime\QTTask.exe" -atboottime O4 - HKLM..\Run: [Adobe Reader Speed Launcher] "C:\Program Files (x86)\Adobe\Reader 9.0\Reader\Reader_sl.exe" O4 - HKLM..\Run: [VoddlerNet Manager] f:\Program Files (x86)\Voddler\service\VNetManager.exe O4 - HKCU..\Run: [Steam] "f:\program files (x86)\steam\steam.exe" -silent O4 - HKCU..\Run: [msnmsgr] "C:\Program Files (x86)\Windows Live\Messenger\msnmsgr.exe" /background O4 - Global Startup: BankID Security Application.lnk = C:\Program Files (x86)\Personal\bin\Personal.exe O4 - Global Startup: Logitech SetPoint.lnk = ? O4 - Global Startup: Monitor Apache Servers.lnk = F:\Program Files (x86)\Apache Software Foundation\Apache2.2\bin\ApacheMonitor.exe O13 - Gopher Prefix: O16 - DPF: {1E54D648-B804-468d-BC78-4AFFED8E262F} (System Requirements Lab) - http://www.nvidia.com/content/DriverDownload/srl/3.0.0.4/srl_bin/sysreqlab_nvd.cab O16 - DPF: {4871A87A-BFDD-4106-8153-FFDE2BAC2967} (DLM Control) - http://dlcdnet.asus.com/pub/ASUS/misc/dlm-activex-2.2.5.0.cab O16 - DPF: {D27CDB6E-AE6D-11CF-96B8-444553540000} (Shockwave Flash Object) - http://fpdownload2.macromedia.com/get/shockwave/cabs/flash/swflash.cab O17 - HKLM\System\CCS\Services\Tcpip..{5F7DB2E1-29C4-4299-A483-B68B19E9F015}: NameServer = 195.54.122.221 195.54.122.211 O17 - HKLM\System\CS1\Services\Tcpip..{5F7DB2E1-29C4-4299-A483-B68B19E9F015}: NameServer = 195.54.122.221 195.54.122.211 O17 - HKLM\System\CS2\Services\Tcpip..{5F7DB2E1-29C4-4299-A483-B68B19E9F015}: NameServer = 195.54.122.221 195.54.122.211 O23 - Service: @%SystemRoot%\system32\Alg.exe,-112 (ALG) - Unknown owner - C:\Windows\System32\alg.exe (file missing) O23 - Service: Avira AntiVir Scheduler (AntiVirSchedulerService) - Avira GmbH - C:\Program Files (x86)\Avira\AntiVir Desktop\sched.exe O23 - Service: Avira AntiVir Guard (AntiVirService) - Avira GmbH - C:\Program Files (x86)\Avira\AntiVir Desktop\avguard.exe O23 - Service: Apache2.2 - Apache Software Foundation - F:\Program Files (x86)\Apache Software Foundation\Apache2.2\bin\httpd.exe O23 - Service: Dragon Age: Origins - Content Updater (DAUpdaterSvc) - BioWare - F:\Program Files (x86)\Dragon Age\bin_ship\DAUpdaterSvc.Service.exe O23 - Service: Device Error Recovery Service (dgdersvc) - Devguru Co., Ltd. - C:\Windows\system32\dgdersvc.exe O23 - Service: @%SystemRoot%\system32\efssvc.dll,-100 (EFS) - Unknown owner - C:\Windows\System32\lsass.exe (file missing) O23 - Service: @%systemroot%\system32\fxsresm.dll,-118 (Fax) - Unknown owner - C:\Windows\system32\fxssvc.exe (file missing) O23 - Service: @keyiso.dll,-100 (KeyIso) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: SAMSUNG KiesAllShare Service (KiesAllShare) - Unknown owner - F:\Program Files (x86)\Samsung\Kies\WiselinkPro\WiselinkPro.exe O23 - Service: Lavasoft Ad-Aware Service - Lavasoft - C:\Program Files (x86)\Lavasoft\Ad-Aware\AAWService.exe O23 - Service: Logitech Bluetooth Service (LBTServ) - Logitech, Inc. - C:\Program Files\Common Files\Logishrd\Bluetooth\LBTServ.exe O23 - Service: @comres.dll,-2797 (MSDTC) - Unknown owner - C:\Windows\System32\msdtc.exe (file missing) O23 - Service: MySQL - Unknown owner - F:\Program.exe (file missing) O23 - Service: @%SystemRoot%\System32\netlogon.dll,-102 (Netlogon) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: NVIDIA Display Driver Service (nvsvc) - Unknown owner - C:\Windows\system32\nvvsvc.exe (file missing) O23 - Service: Sony Ericsson OMSI download service (OMSI download service) - Unknown owner - f:\Program Files (x86)\Sony Ericsson\Sony Ericsson PC Suite\SupServ.exe O23 - Service: @%systemroot%\system32\psbase.dll,-300 (ProtectedStorage) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @%systemroot%\system32\Locator.exe,-2 (RpcLocator) - Unknown owner - C:\Windows\system32\locator.exe (file missing) O23 - Service: @%SystemRoot%\system32\samsrv.dll,-1 (SamSs) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: ServiceLayer - Nokia. - C:\Program Files (x86)\PC Connectivity Solution\ServiceLayer.exe O23 - Service: @%SystemRoot%\system32\snmptrap.exe,-3 (SNMPTRAP) - Unknown owner - C:\Windows\System32\snmptrap.exe (file missing) O23 - Service: @%systemroot%\system32\spoolsv.exe,-1 (Spooler) - Unknown owner - C:\Windows\System32\spoolsv.exe (file missing) O23 - Service: @%SystemRoot%\system32\sppsvc.exe,-101 (sppsvc) - Unknown owner - C:\Windows\system32\sppsvc.exe (file missing) O23 - Service: Steam Client Service - Valve Corporation - C:\Program Files (x86)\Common Files\Steam\SteamService.exe O23 - Service: @%SystemRoot%\system32\ui0detect.exe,-101 (UI0Detect) - Unknown owner - C:\Windows\system32\UI0Detect.exe (file missing) O23 - Service: @%SystemRoot%\system32\vaultsvc.dll,-1003 (VaultSvc) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @%SystemRoot%\system32\vds.exe,-100 (vds) - Unknown owner - C:\Windows\System32\vds.exe (file missing) O23 - Service: VoddlerNet - Voddler - f:\Program Files (x86)\Voddler\service\voddler.exe O23 - Service: @%systemroot%\system32\vssvc.exe,-102 (VSS) - Unknown owner - C:\Windows\system32\vssvc.exe (file missing) O23 - Service: @%systemroot%\system32\wbengine.exe,-104 (wbengine) - Unknown owner - C:\Windows\system32\wbengine.exe (file missing) O23 - Service: @%Systemroot%\system32\wbem\wmiapsrv.exe,-110 (wmiApSrv) - Unknown owner - C:\Windows\system32\wbem\WmiApSrv.exe (file missing) O23 - Service: @%PROGRAMFILES%\Windows Media Player\wmpnetwk.exe,-101 (WMPNetworkSvc) - Unknown owner - C:\Program Files (x86)\Windows Media Player\wmpnetwk.exe (file missing) -- End of file - 8958 bytes

  Read the article

• what service to restart for /var/log/auth.log to start

  - by Bond

  Here is a situation since the log files on my server had grown to several Gigabytes I took a backup of directory /var/log and then manually when to each subdirectory of /var/log and the files which were big in size I did cat > /var/log/file_which_is_big press 2 times enter key (basically over wrote those files with a blank space) and then Ctrl+C So basically I over wrote those files to be blank. Now when I open /var/log/auth.log I don't see any entry (which is expected also since I over wrote) but when I exit the SSH session and login again then also I do not see any entry in auth.log is there any way other than rebooting the machine to make sure I keep getting the entries in /var/log/auth.log I am not sure which service writes in this file. This is a Ubuntu 10.04 server.

  Read the article

• SFTP jail & Keeping file ownership the same / File owner per folder

  - by Dragonshadow

  I want to setup a jailed SFTP account for a subfolder of another user's home folder, but want the owner of everything in that subfolder to stay the same, including new files and folders uploaded and created by the sftp user, while still allowing access to the files and folders of that subfolder as if the SFTP user was the parent user. rawny bawb-sftp /home/rawny <- rawny owns this /home/rawny/sftp <- rawny owns this too, but bawb-sftp can upload to it, edit files, etc bawb-sftp uploads a file /home/rawny/sftp/lol.txt rawny should still own the file, as if he made it in the first place, even though bawb-sftp was the one that uploaded it. Basically I guess I'm asking for an sftp jail that acts as a highly limited passthrough/puppet for another user?

  Read the article

• Have powershell zip the contents of a bunch of folders, individual zip for each folder

  - by WebDevHobo

  Recently, I asked how to do this with a .bat file and an answer was provided. for /D %%d in (*.*) do "C:\Program Files\7-Zip\7z\7za.exe" a -tzip %%d.zip %%d However, this proved useful only for folders that have no spaces in their name. The reason being that batch will do the following: if the folder name is "jef's vacation pics", the variables will be: %%d = jef's %%e = vacation %%f = pics And then it tries to pass only %%d to the 7-zip program, which will not find such a folder and therefor will not create a zip file. I've tried looking up some tutorials, documentation sites and such, but I haven't been able to come up with an answer. There may be an answer, but I want to take this opportunity to try my hand at powershell. I was thinking that a function with 1 argument, that being the parent-folder of the sub-folders that need to be zipped, would be the best approach. So here's what I have, which doesn't work, probably due to my general in-experience with powershell: function zipFolders($parent) { $zip = "C:\Program Files\7-Zip\7z\7za.exe"; $parents | ForEach-Object $zip a -tzip }

  Read the article

• VSFTPD Unable to set write permissions on folder

  - by Frank Astin

  I've just set up my first FTP server with VSFTPD on cent os . I can connect to it fine using a user in the group ftp-users but I get read only access . I've tried several different CHMOD codes on the folder (even 777) all to no avail . This is the tutorial I used to set up the server http://tinyurl.com/73pyuxz hopefully you'll be able to see something I missed. Thanks in advance . Requested Config File : # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log #xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd whith two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES

  Read the article

• local cache for NAS or network folder

  - by HugoRune

  I am planning to build a network attached storage (NAS) server. Is there a way to cache frequently acccessed files from the remote storage automatically on the local PC? (I am not looking for a way to sync whole folders like rsync, but rather something that automatically and transparently caches the last accessed 50 gb of files.) Ideally I am searching for something that caches writes as well as reads, since only one pc will be accessing the server (and one day of lost changes if the local cache is damaged would be acceptable) I looked into windows offline files, but as far as I could tell this requires manual interaction to disconnect the server or go into offline mode in order to use the cache. The server would probably be running Linux or freeNAS, the pc runs Windows xp, but could be upgraded to 7 if required.

  Read the article

• Moving automatically spam messages to a folder in Postfix

  - by cad

  Hi My problem is that I want to automatically to move spam messages to a folder and not sure how. I have a linux box giving email access. MTA is Postfix, IMAP is Courier. As webmail client I use Squirrelmail. To filter SPAM I use Spamassassin and is working ok. Spamassasin is overwriting subjects with [--- SPAM 14.3 ---] Viagra... Also is adding headers: X-Spam-Flag: YES X-Spam-Checker-Version: SpamAssassin 3.2.5 (2008-06-10) on xxxx X-Spam-Level: ************** X-Spam-Status: Yes, score=14.3 required=2.0 tests=BAYES_99, DATE_IN_FUTURE_24_48,HTML_MESSAGE,MIME_HTML_ONLY,RCVD_IN_PBL, RCVD_IN_SORBS_WEB,RCVD_IN_XBL,RDNS_NONE,URIBL_RED,URIBL_SBL autolearn=no version=3.2.5 X-Spam-Report: * 0.0 URIBL_RED Contains an URL listed in the URIBL redlist * [URIs: myimg.de] * 3.5 BAYES_99 BODY: Bayesian spam probability is 99 to 100% * [score: 1.0000] * 0.9 RCVD_IN_PBL RBL: Received via a relay in Spamhaus PBL * [113.170.131.234 listed in zen.spamhaus.org] * 3.0 RCVD_IN_XBL RBL: Received via a relay in Spamhaus XBL * 0.6 RCVD_IN_SORBS_WEB RBL: SORBS: sender is a abuseable web server * [113.170.131.234 listed in dnsbl.sorbs.net] * 3.2 DATE_IN_FUTURE_24_48 Date: is 24 to 48 hours after Received: date * 0.0 HTML_MESSAGE BODY: HTML included in message * 1.5 MIME_HTML_ONLY BODY: Message only has text/html MIME parts * 1.5 URIBL_SBL Contains an URL listed in the SBL blocklist * [URIs: myimg.de] * 0.1 RDNS_NONE Delivered to trusted network by a host with no rDNS I want to automatically to move spam messages to a folder. Ideally (not sure if possible) only to move messages with puntuation 5.0 or more to folder.. spam between 2.0 and 5.0 I want to be stored in Inbox. (I plan later to switch autolearn on) After reading a lot in procmail, postfix and spamassasin sites and googling a lot (lot of outdated howtos) I found two solutions but not sure which is the best or if there is another one: Put a rule in squirrelmail (dirty solution?) Use Procmail Which is the best option? Do you have any updated howto about it? Thanks

  Read the article

• Deleting an undeletable Directory in Windows 7

  - by Kaizen

  I have encountered a problem from time to time but have not been able to resolve it without formatting. I have a directory called d:\DotNet that I want to delete. I cannot because inside this folder there is another folder called: T4 Code generation and Misc. When I try to deleting or access T4 Code generation and Misc., I get the following error: Could not find this item This is no longer located in D:\DotNet. Verify this item's location and try again. Hopefully this is a simple fix.

  Read the article

• Desktop.ini Issues/Confusion

  - by EpicDavi

  BACKSTORY: I was out of town for a while and I forgot to turn my computer off. When I came back I saw that a desktop.ini file was on my desktop (using Windows 7). I thought that was odd because I knew it was a system file and it usually didn't show up due to the fact that I had disable the feature to show system files. Also it wasn't translucent like the other system files. I went to my control panel and saw that the "Hide protected operating system files" was indeed enabled. This puzzled me so I disabled the setting and another one was on my desktop like it usually is hidden. So now I have to desktop.ini files on my desktop: one hidden and one not hidden. I am doing an antivirus check to see if anything was going on and I will give an update soon. I am pretty sure these files are harmless and could be deleted but I would rather get another person's opinion on the subject. Thanks! UPDATE: I did an anti-virus scan and it seems I have no problems. It is odd because the file seems to maintain system file properties such as not being able to be edited and other things. Also I have tried restarting my computer and it is still not hidden. So the question remains: What should I do with the file and what caused it?

  Read the article

• IIS 6.0 FTP Folder Permissions

  - by Beuy

  I have a IIS Ftp website setup like so \ftp\users\domain\public\public Software that runs on clients computers logs into the FTP by specifying domain\public and moving to public, it then uploads or downloads files / folders into that area. I wan't to restrict the permissions on \ftp\users\domain\public so that nothing / noone can write files or folders here, only to \ftp\users\domain\public\public. I setup the NTFS permissions of the folder to remove domain\users, public and server\users to not have modify right, yet I can still upload / modify files. I have disabled inheritance from the parent folder of \ftp\users\domain\public as well. Any ideas on what I'm missing here? P.S I know this is a stupid setup and makes no sense, it's some bizarre legacy application that I need to migrate to a safer environment until it can be replaced, then I'm going to light it on fire -.- and dance around it.

  Read the article

• Incremental backups from Rackspace Cloud Files to Amazon Glacier

  - by Martin Wilson

  Is there a software product/module (open-source or commercial) that can provide incremental backups from Rackspace Cloud Files to Amazon Glacier? We are looking for something that will provide the following functionality (or achieve the same result, i.e. a cost-effective backup strategy for files stored in Rackspace Cloud Files): Work out which files have been added to or modified in a Rackspace Cloud account (since the last backup). Create a ZIP (or similar) of these files and store them in Amazon Glacier. Keep a record of which files are in which ZIPs. Ideally, restore either a single file or all files from Glacier back into Rackspace.

  Read the article

• Local links ( in browsers ) on *nix systems

  - by meder

  On Windows I can access files directly from the browser ( or at least I have it configured currently, forget if it was native like this ) with the file:// protocol, so I can access files from say the C drive. I'm wondering what the equivalent would be to accessing my files from the browser, if at all possible on a *nix system such as Debian.

  Read the article

• Windows 7 User / Documents and Settings folders

  - by Kip

  Yo, I have a machine - Windows 7, nothing remarkable about the install but i have multiple drives in the machine. I have a c:\users\username folder which seems to be current and is the one that all windows properties point to. However, i also have a f:\documents and settings\username folder (which was hidden) which is also current and up to date. If i edit anything from either, they seem to "replicate" or update each other ie if i rename an icon on my desktop, it renames it in c:\users\username\desktop and f:\documents and settings\username\desktop. Likewise if i edit directly in one of those folders, it does the same to the other. Any one got any ideas what might cause this? Problem i have is that I need to remove the f drive all together! Thanks in advance

  Read the article

• "Path Not Found" when attempting to write to a sub folder within a mapped drive

  - by Adam

  We have an interesting issue with one of our server shares, or possibly, our Win 7 desktops. When our users try to save files in a sub folder, either via copy/paste or through an application, to a mapped drive on our DC they receive an error saying "Path not found". They can however browse this folder and open files from it. This is where the "Path Not Found" error doesn't seem to stack up in my opinion. Users can however save files fine in the root folder of the mapped drive, it appears only to affect sub folders. It seems to be random which users and machines this affects. The users can log on to a different machine and be able to save in sub folders fine, on the same mapped drive. Event viewer hasn't been much help either. Currently, the only solution we have found is to image the machines affected which solves the issue. Our servers are Server 2008 R2 with Win 7 Pro desktops. Any help/pointers/suggestions would greatly be appreciated.

  Read the article

• Move files and resize partition automatically?

  - by Rob

  I'm in a bit of an odd situation. I've recently been working on switching from debian to arch, and I've got my home partition for both pointing to the same partition (different usernames, so that's not an issue). What I want to do is one of two things, either: Set up user on arch with same username and group as debian, and have everything just sort of work! OR Move files I'd like to share between home folders to their own partition, and mount it with fstab. For the second one, I have around 150gb of files that would need moved to their own partition, and i've got about 15gb of free space on my home partition. So what I'd want to do is somehow make a 10gb ext4 partition, move 10gb-ish of files, expand the partition again, move files again, etc until all the files are moved to their own partition. I can do it manually, but it'd be easier if I could say "Move 10GB-ish of files from here to there, and then resize it and repeat until I'm out of files". Is that even possible?

  Read the article

• Changing Win 8.1 Pro Store App Installation Folder

  - by ChiliYago

  I have a Dell Venue 8 Pro tablet with Windows 8.1. The c:\ is very limited capacity at only 24GB. With the OS only on the c:\ I just have 8.6GB of free space. So I have added a 64gb SSD to the machine and want to install all my apps on it and not the C Drive. I know the apps get installed in c:\Program Files\WindowsApps folder so I have ROBOCOPY'd all the files to d:\Program Files\WindowsApps and created a symbolic link using mklink. It seems that new apps are install correctly now on d:\ however the existing apps fail to open. What is the Microsoft's solution to making this happen seamlessly?

  Read the article

• Windows 7 offline files - work temporarily offline even if network connection works

  - by Robert

  Sometimes I am connected via VPN to a network containing the server where files are stored which are cached by Windows offline files feature. Sometimes the connection works good and working this way is not a problem - on other times working is quite a pain because of high latency when working with the files in the Windows explorer. Is there an interactive way how a user (with admin permissions) can temporary suspend online usage of offline files? I already activated the "Transparent caching" group policy feature (Computer Configuration Policies Administrative Templates Networks Offline Files) with a network latency of 200msec but from my experience even if I get ping times to the file server of less than 40msec online usage is quite tenacious. Setting low latency times at this point causes the offline files often to toggle which makes problems with some applications working with several files and requires them to be consistent (like SVN client).

  Read the article

• How to make FileZilla open all the required files with one click

  - by Omar Tariq

  Is there any way of configuring FileZilla so that I can open all the files on a server that I use to edit with just one click. For example if the files are like this: /home/abc/def/one.txt /home/abc/def/yet/another/directory/two.txt /home/abc/def/ghi/yet/another/directory/three.txt Then it is very time-consuming to navigate through each directory and open the required files. These are only 3 files but what if we have around 10 to 20 files? Yes, copying the path of the directories is one thing. But something that is built-in so that I can just click a button like open all the required files of this connection and it opens all the files in the editor (as set in FileZilla preferences) then that would be great!

  Read the article

• how to optimize virtual box shared folders

  - by Nrew

  This is really pissing me off. No matter how much memory I put into the guest os(windows xp). It still hangs for about 365 days before you can access the file you want to access from the shared folder. What do I do to make things faster? Because after it hangs and not respond for 365 days. It will do it again for another 250 days. Ive even set the shared folder to permanent. This is a fairly decent machine: 2.50ghz processor(x64 architecture, but I have only 2Gb of memory so my host os is just 32 bit windows 7) hdd has much space left: 156 Gb free of 250Gb

  Read the article

• OSX: sync Documents folder to Dropbox with version control

  - by James Porter

  I have ample storage in Dropbox to sync my entire OSX Documents folder, and I'd like to this just so that I have it anywhere I go. I found this question, which describes a method for doing this with symlinks. Seems good, the only problem is that it would be nice also to have everything under version control. I thought perhaps a better solution would be to set up my Documents folder as a git repo with a remote that I would push to in my Dropbox folder. Alternatively, just set up Documents as a git repo with no remote and then symlink it to Dropbox. Which of these two alternatives is preferable? What are some pitfalls I might not be thinking of with each? It also has occurred to me that some of the subdirectories of Documents are themselves git repos with github remotes. Would it cause problems for these subdirectories if I made Documents a git repo? If so, how do I get around this? Would making Documents an svn repo instead help? Is there a way to set up git so that this is not an issue?

  Read the article

• What is stored in %Windir%\System32\LogFiles\WMI\RtBackup?

  - by Helge Klein

  I occasionally notice in Resource Monitor hard disk activity related to ETL files in the folder C:\Windows\System32\LogFiles\WMI\RtBackup. Which process/service creates these ETL files and what is their purpose? Resource Monitor shows "System" as the process which is correct since ETW traces (that is what ETL files are) are created by the kernel. But I am interested in the process that causes the traces to be created. This happens on Windows 7, by the way.

  Read the article

• Libraries merged folder views

  - by Stigma

  So I pretty much love the Windows 7 Libraries feature, and saw one use for them that I thought would be perfect, but I can't seem to manage it. Basically, a merged view of different folder structures. Suppose I make a new generic library and add three locations to it: C:\Test\, D:\Test\ and D:\temp\Test\. Now, these may look somewhat okay as long as there are no duplicates in these folders. (It wants to group them based on the included directory, which one can work around by looking on google - I don't have the precise trick on hand I am afraid.) But when you get collisions and, say, two of those directories have a Sub directory in them, stuff becomes unusable (assuming Arrange by: Folder view). You'll have multiple folders listed named Sub, which is pretty useless when looking for data. I want folders to get 'merged', which ought to be possible somehow since it can create these merged views based on artist, album etc in other views. So all subdirectories that are double (and recursively checking for doubles inside those, etc) ought to be merged for as far the View is concerned. If files have a collision, I don't really care what happens - hide one, show both, filter out duplicates, whatever. (Although an option would be nice...) Anyhow, is there anyone who knows how to get such a 'merged folder structure' functionality for Libraries? It would be really useful for me.

  Read the article

• Outlook collapses IMAP folders by default

  - by Aron Rotteveel

  I recently switched my mail account from POP3 to IMAP and created server-side rules to help me manage my mail better. I use Outlook 2007 as a mail client. For some reason, it seems then ever since I switched to IMAP, all my folders are collapsed by default. Since my folder tree goes down 4 levels, this is pretty annoying. I don't know any better than Outlook remembering my folder preferences, but it seems to forget them as soon as I close the program now. Is there any cause for this, and more importantly, is there a known fix for this problem?

  Read the article

• IIS 6.0 FTP Folder Permissions

  - by Beuy

  I have a IIS FTP website setup like this \ftp\users\domain\public\public Software that runs on clients computers logs into the FTP server by specifying domain\public and moving to public, it then uploads or downloads files / folders into that area. I want to restrict permissions on \ftp\users\domain\public so that nothing/nobody can write files or folders here, only to \ftp\users\domain\public\public. I setup the NTFS permissions of the folder to remove domain\users, public and server\users to not have modify right, yet I can still upload/modify files. I have disabled inheritance from the parent folder of \ftp\users\domain\public as well. Any ideas on what I'm missing here? P.S I know this is a stupid setup and makes no sense, it's some bizarre legacy application that I need to migrate to a safer environment until it can be replaced.

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >