Search Results

Search found 29432 results on 1178 pages for 'mite fine dailes'.

Page 72/1178 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• games and movies become too slow after some time

  - by ishaq

  On my gaming desktop, I was fixing my desktop's power supply when something seemed to burn (I got that stinging burning smell). However when I turned ON the computer (it was OFF before), everything seemed to be fine. However, I have noticed that now it becomes too slow if I play a game or movie on it. I am talking about the computer becoming painfully slow after about 5 minutes into the movie/game (it works fine otherwise e.g. browsing), it becomes so slow I can see individual frames from movies/games. What could be the problem? A fried video card? friend memory (RAM), something else? My system's configuration is: Intel Core i7 CPU 3.40GHz 8GB DDR3 RAM 2TB WDC HDD NVIDIA GeForece GT 220 (1GB) Thermal Take Commander MS1 Chassis ( http://www.thermaltakeusa.com/Product.aspx?S=1394&ID=2051 ) mainboard: Intel DH67CL AAG10212-208 Realtek High Definition Audio

  Read the article

• Computer connects to lan, but not the internet

  - by Jay

  I have a computer with Vista Home that can connect to the router, but it cannot get on the internet. I cannot ping google.com, the request times out. I've tried this on two separate networks and have no trouble with other computers connecting. I've renewed ipconfig, reset winsock, updated the wireless adapter, and the hosts file looks fine. I've tried disabling the firewall as well as a direct wired connection. I did a scan with Norton and it didn't find anything. Is there anything else I can try before resorting to a system restore? Update (Copied from Answer) Windows Update was able to find updates and install them (though, they could have already been downloaded previously). When I pinged Google by using their IP 66.102.9.103, it said it lost 25 percent of the packets. I successfully flushed the DNS but it didn't help. Also, I found safe mode with networking works fine.

  Read the article

• Why is there no 64-bit Linux Firefox build?

  - by Legooolas

  It seems that I have to build my own 64-bit Firefox for Linux, as Mozilla won't support it until Firefox 4. Why is this? It looks to me as though it works fine, although without some of the speed improvements to the Javascript engine which the 32-bit version gets. (Edit: Yes I could run the 32-bit version but I'm trying to keep my system clear of 32-bit cruft and libraries etc, and all the plug-ins worked fine in 3.0.11 64-bit unofficial builds.) Update : No longer relevant as Mozilla provide 64-bit builds, but they don't show them on the download pages of mozilla.org, just on the ftp site as mentioned in one of the answers below.

  Read the article

• DVI monitor detected only on computer startup

  - by kamil

  I've recently connected a new monitor, LG M2252D-PZ, to a rather outdated computer with Windows XP and Radeon 9600. XP has SP3 installed, video drivers are the latest version back from the times the video card was still supported. My problem is that the monitor works fine only as long as I don't turn it off or switch it to a different input. When I turn it back on, it says "no signal". The key to the problem must be the DVI port, to which the new monitor is connected. The previous monitor was connected to the VGA output, and I've tested that the new one also works fine when connected to the analogue port. Apparently, the computer tests for the presence of a monitor on the DVI port only on startup. The question is, how do I change this?

  Read the article

• ESXI 4.0 Slow response in opening anything accross the network on a Virtual Server running Win2008

  - by user40944

  Hi I recently installed a HP ML350G6 Server with Windows Small Business Server 200864bit, Exchange 2007. The server was running fantastically and we transferred all user data onto the new server and no problems for 2 weeks! We then installed SQL2008 and transferred the accounts package onto the server and this is where the problems started. Users are now complaining to open a work document can take 2 minutes and the same with regard to anything else. The server itself seems fine, the virtual server seems fine! No disk performance problems (doesn't go above 50% unless i really copy lots of things), no memory, (12Gb only using 7Gb) cpu (usage is low average about 15%) etc on both the VM and in Windows Task manager. I have made sure disk caching is enabled on the raid controller (which made no difference). Network cards are running 1Gb and plugged into HP GB switch. Please help!

  Read the article

• VPN stuck on Verifying Username and Password

  - by user2791

  I'm building a new machine and everything is working correctly, except that I can't log on to my VPN. It hangs at the "Verifying username and password..." step, then returns after about 30 seconds claiming Error 721. I have another machine sitting next to this one with the VPN connection configured exactly the same, connecting just fine over the same wifi network, so I'm convinced that there is no server or firewall problem. The VPN works fine. This machine simply can't connect to it given the correct credentials and configuration. Any suggestions?

  Read the article

• Windows XP crashes by GT610 driver (nv4_disp)

  - by undone

  I have a PC which was working fine but one day screen went dark and nothing was shown. I thought the problem is graphic card, so I replaced it with new one. I bought a new graphic card (GeForce 610) and installed it on my system. I formatted my hard-drive and installed a fresh Windows XpSp3 and its drivers. Everything was fine but after installing graphic card's driver, I got an error saying windows got stuck in an infinite loop and it couldn't get out (in nv4_disp). I uninstalled it and downloaded its last version and installed it. Unfortunately, I got the same error and windows restated! Here's my system: Pascal Motherboard PT880PRO Intel CPU Windows XPSp3 I searched this issue on the internet and I found bunch of suggestions (from cleaning hardware to installing latest version of its driver) but nothing help! Any help would be appreciated! Thanks.

  Read the article

• Is there a word processor similar to MS Word which saves files as readable txt files?

  - by zenbomb

  I'm writing a paper together with my supervisor and would like to have a more sophisticated version control than *_291112_NEW_NEW_revised1.doc files. My supervisor is a non-computer person will never ever use LaTeX or git and loves MS Word. I'm therefore looking for an alternative to Word (I need commenting on text passages!) which stores the files as clean text (Markup for formating is fine), so I'm able to put them under version control on my side. I'm aware that git can also handle binary files, but I'd prefer the cleaner way of looking at the contents directly. If there's a way to automatically extract the text from word files, I'm fine with that too for now.

  Read the article

• Pc not booting, no video output, hard drive noises

  - by bullettime

  My computer suddenly stopped booting up. I just came back from a week long trip, and it was working fine before I left. When I power up the computer now, it seems to power up just fine (leds on, fans working), but then there's no output on the screen at all, and there's a noise that seems to be coming from the HD, like it is trying to read something. After the noise starts, it does 6 cycles and then stops. I'm not sure but I don't think it did this noise when the pc was still working. I tried using the onboard video card instead but it made no difference. What could be wrong with my computer?

  Read the article

• I have no sound in my Media players

  - by Lefteris Gkinis

  I have Windows Professional x64 with two sound cards. for many months these cards (and the all sound system) was working fine. Suddenly my System (my PC) stops having sound. from WINDOWS MEDIA PLAYERS and for any other media players The default sounds from windows are working fine but I don't have sounds from media players. Also I open the "Sounds And Audio Device Properties" and in "Volume"Tab I press "Advance". There I receive an error "DirectSoundSetting not available". I have already Uninstall and re install my sound cards... But Nothing. Did anyone knows where the problem is?

  Read the article

• Can I set up two NICs bridged together and still SSH into the bridging machine?

  - by squinlan

  I have a ubuntu box setup with two NICs. I can bridge them together just fine, but I haven't been able to setup a way to SSH into the box once the connections are bridged together. Here's my /etc/network/interfaces: auto lo iface lo inet loopback auto eth1 iface eth1 inet manual auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.168.33.213 netmask 255.255.255.0 gateway 192.168.33.1 bridge_ports eth0 eth1 bridge_stp off bridge_fd 0 bridge_maxwait 0 This works just fine for bridging, but I'm not able to SSH into the box. I tried setting up another interface on one of the NICs: auto eth0:1 iface eth0:1 inet static address 192.168.33.215 netmask 255.255.255.0 gateway 192.168.33.1 But this really didn't help. Is it possible to ssh into a machine that has all of its NICs bridged? If it is, how?

  Read the article

• Why do I need to add my application pool identity to the IIS_IUSRS group?

  - by smcolligan

  I'm setting up a .NET v4.0 web application on a Windows 2008 R2/IIS 7.5 server that uses a domain account for the application pool identity. When I access the site, I get the following error: The current identity () does not have write access to 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files' According to this: http://learn.iis.net/page.aspx/140/understanding-built-in-user-and-group-accounts-in-iis/ the identity of the worker process is added to the IIS_IUSRS group when the process starts. This seems to work fine for the existing .NET v2.0 applications I have running on the same server (I have not had to add their domain account application pool identities to IIS_IUSRS group). This does not seem to be the case for the first .NET v4.0 web application I'm setting up. Once I add the identity to the group, everything works fine. I suspect something is not configured correctly that is forcing me to do this. I would like to understand this before rolling out more sites/servers. Thanks in advance for your help...

  Read the article

• Cisco WLAN Controller not pushing out DHCP addresses, what else could it be?

  - by Name

  On our Cisco WLAN Controller web interfaces, in Controller Interfaces, I have made a new interface with these settings: VLAN Identifier 202 IP Address 172.16.202.1 Netmask 255.255.255.0 Gateway 172.16.202.254 Primary DHCP Server 172.16.100.3 Secondary DHCP Server 172.16.100.2 Port: LAG I've also made a new WLAN and assigned it to the above interface. I have saved changes. But our wireless devices, although they seem to authenticate with the WLAN fine, they always get stuck on "obtaining DHCP address", so it seems the WLAN Controller isn't pushing out DHCP addresses to our devices. We do have a DHCP scope for the above in Windows Server 2008 R2 and everything there seems fine. If I connect a device with a static address (e.g. 172.16.202.10), it will connect. Stuck on what to do :(

  Read the article

• Multi-monitor resolution and position settings lost after reboot

  - by SoftDeveloper

  I've had two 1280x1024 monitors running for years on an nVidia 8800GT card with no problems. I've now replaced one monitor with a new 2560x1440 one. The card seems to support both fine, however every time I reboot the resolutions and monitor positions revert to the old settings. I've tried upgrading, downgrading, stripping out and reinstalling many versions of the nvidia drivers to no avail. Logging in as another user doesn't help - same problem. Booting into another another OS (Win7 64) works OK, so it is just this OS installation. During boot up everything looks fine (ie native 2450x1440 res) until the nVidia control panel or something is loaded which flips it back into the old mode. I have no old saved nvidia profiles. I can't find anything in the registry relating to these old settings. Its driving me crazy having to set resolutions and realign monitors on every reboot! Can anybody help?

  Read the article

• Call connects through Emapthy, but no voice

  - by Arthur

  I am trying to make calls using Empathy on Debian.The call rings and connects, but I can't hear voice, or answering machines. I had a similar problem a while back that was caused by my PBX not being compatible with a protocol. The protocol issue is fixed now and Linphone works fine on a different pc. I tried using Ekiga, on the problem computer, and it works fine.The problem seems to be with the settings on Empathy. I need to get this going. Any help would be greatly appreciated.

  Read the article

• Git push on localhost with htaccess

  - by Rooneyl

  I am looking into setting up a remote git repo. To start with I have created it on my Windows machine using xampp following this guide. All works fine except when I try to add some security, as per step 6 of the guide (for when I migrate it to my main web server). I have added passwords by using passwd and adding htaccess to the htdocs folder. This works fine (I have checked in my web browser), but when I try and push I get prompted for my password the it fails with a error (code 22). $ git push origin master Password for 'http://git@localhost': error: Cannot access URL http://git@localhost/s.git/, return code 22 fatal: git-http-push failed Any ideas?

  Read the article

• Cannot open mailbox

  - by AdamL

  Ive got a server running Windows Server 2012 and Exchange 2013 on my local domain. Ive got the mailboxes setup and can send/receive emails fine when using OWA. If i try to open the mailbox using Outlook 2010, I get the below error If i try to expand the folder, i get the same message but am still able to use OWA. When I try to run a send/receive, I get the below error: After a bit of researching on the web, people suggest that the profile is corrupt. I have recreated the profile and tried again but still same error. Another post has suggested that the issue is DNS and client PCs should be able to resolve autodiscover.domain.local and server.domain.local to the IP of the server. This is fine on my network. Every user has got the same issue and I am struggling to identify what is causing the fault. Advise appreciated.

  Read the article

• Network Bypass - PC Registration Page - I'm trying to bypass a college Registration Page so I can ac

  - by Kamron3

  What I'm trying to do: Connect to the internet without registering But! Here's my problem: I can't connect. I used to be able to, now when I try to connect it says "Server not found." I can connect just fine on my other Laptop. I did a test as well. I used a LAN USB adapter and could connect fine, then now I can't connect again. Possibly because I am using uTorrent to download stuff, but I want to connect again Is there anyway I can use some sort of "virtual adapter"-type of connection where it masks my actual adapter? How can I connect to the connection without having to buy more and more Network USB Adapters? Thanks much!

  Read the article

• Problems with connecting to wireless network on windows 7

  - by Naveen

  I have a Dell laptop with Windows 7 (Home premium) 64 bit edition installed on it. I use a Wi-Fi router to browse the net. My problem is, I lose the network connection every 10 minutes or so. The network icon on the system tray shows the refresh icon and the status as "identifying network". The network is fine and works fine with my phone. I saw on the net this may be caused if I have enabled IPv6, so I disabled it but still problem persists. When I look at the event log I see the following entries: "Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0xXXXXXXXX. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server." I have also installed VirtualBox(32 bit edition) on the laptop. Does anybody any solution to this?

  Read the article

• Windows 7 64 bit will hesitate and the screen will go black

  - by jondrnek

  I am running windows 7 64 bit with 2 monitors. Several time a day the system will freeze up for about 5 seconds and the screens will go black. After the 5 seconds are up, the system continues to function properly. I get no error messages that pop up and all the applications I am running handle it fine. All the devices appear fine, my drivers are up to date and nothing is jumping out at me in event viewer. What are the next troubleshooting steps I can take?

  Read the article

• Windows 8 Hidden Downloading? Slow Internet?

  - by EApubs

  After upgrading to Windows 8, im facing a very slow download speed. My router and the NIC is working fine because on the same PC I also have Linux. In Linux, everything works fine. When checking through the task manager, it shows that the system use the full bandwidth 1Mbps even without a download. The process menu doesn't show whats taking much bandwidth. The bitdefender's firewall also shows network activity. Is there any hidden apps downloading? How to fix this?

  Read the article

• Getting Drag and Drop to Work in Virtual PC 2007 on Windows 7.

  - by Kryten

  Hi, I have Virtual PC 2007 installed on my Windows 7 machine. Before anyone asks, I have installed VPC 2007 because my machine does not support the new Virtual PC for Windows 7. Everythings working fine, except for the drag and drop file feature. On my old Windows XP machine the drag and drop feature works fine, but on Windows 7, nothing happens. I just get the "no drop" cursor. I HAVE installed Virtual Machine Additions and have run Virtual PC under XP Compatability, but still nothing. The Virtual Machines I have tried draging and dropping files onto on are: Windows 2000 Windows XP Windows 98 and as I said they all have Virtual Machine Additions on them. Whats going on? How can I get the drag and drop feature working? I did see this question, but it still doesn't answer my question.

  Read the article

• XP Clients can't copy to networkshare

  - by chewbacca76

  i have a windows 2003 domain where i have strange problem. One of our file shares is on a 2003r2 domain controller, xp clients trying to copy files on the share are always getting the error error copying file or folder filename could not be copied. path too long while windows 7 clients work fine. Nothing unusal is found in the eventlog on both the server and the client. It doesn't matter if i access the share by fqdn or ip, the path is including filename shorter than 20 characters i.e. \path\share\file.txt Copying files to other servers is fine. Reading from the shares is ok too. Happened from one day to the other, one windows update that was installed this day (kb2736233) was removed but nothing changed. thanks for any tips

  Read the article

• What are the most likely reasons an application would fail on only one of my servers?

  - by Rising Star

  I have several servers to test new code on. I primarily push out asp.NET web applications. Last week, I had an issue where I installed a newly developed web application on three servers. The three servers all run in separate environments. The application worked fine on two of them, but consistently crashed on the third server with each web request. The problem was eventually traced to an in-house developed .dll file being out of date on the third server. I'm certain that this kind of thing happens all the time. However, there are numerous things that could go wrong to cause this kind of behavior. I spent quite a bit of time tracing this problem. I would like to make a list of things to be suspicious of next time this happens. What are the most likely reasons that a web application would crash on one of my servers while identical code runs fine on another server?

  Read the article

• Windows 2008 Server network issues

  - by Snowflow

  I have this one server that just doesn't want to be on the internet It's a new server, a twinblade, the other twin works, but not this one. It can connect fine to everythign else in the LAN, but cannot go out on the net It can be reached by ICMP requests over the net (the nagios server can probe it, but not ping it for instance), but not TCP Everything seems fine both in firewall and machine, i get no issues. Anyone care to help me out where i can start looking, i'm seriously confused. edit: it can ping gateway and through the sonicwall site to site VPN, it\s also able to resolve DNS. the only thing it can`t do is reach anything outside of LAN/VPN

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >