Search Results

Search found 22877 results on 916 pages for 'network storage'.

Page 72/916 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• windows 7 wireless knocks off other computers on the network

  - by Sean

  I am trying to fix a wireless network issue. When a new windows 7 machine (we have 2 in the house) we have problems with any other windows xp machines connecting to the wireless network. I am using a linksys WRT110 running Firmware Version: 1.0.04 (which is not the latest firmware its Ver.1.0.07 but the router would not use the bin update file). I have tried a ton of variations in setting for the wireless network, changed the channel, the security level (none, wep wpa, wpa2), network type (g,bg mixed). I have also read some stuff about homegroup settings for windows 7 but have not seen any differences that make a difference. Basically windows 7 does not like to connect to our network but when I manage to get it to work the windows xp pro machines get kicked off. The windows xp pro machines are a few years old but both windows 7 machines are less than 6 months old.

  Read the article

• Unable to connect to network

  - by user33750

  Hey guys, I have a question. I have been having problems connecting a new netbook to my network at home. I have an Asus Eeepc 100HAB. I have tried to run a repair on the connection, uninstalled and re-installed the network card, made sure all of the drivers are up-to-date as well. Two caveats: I have a laptop that I recently switched to a wired connection because it wasn't connecting to the network as well, and the netbook connects to an unsecured network i found just fine, only having a problem getting into my home network. Passwords are correct, and the computer where the connection originates from is working fine as well. Any ideas?

  Read the article

• Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedor

  - by Jim Dobbs

  Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedora12 does a "Sleeping Beauty" and I, apparently, am not am not a "handsome prince"! The system puts video and network to sleep and it will not wakeup. I have heard of this problem on laptops, but this is a tower. Any ideas or help is appreciated. I tried to ping the network card from another system and ping fails. The logs indicate that the system continues to be active. Pressing keyboard short-cut keys makes the disk light blink but neither the video or network card comes alive. Failing all else, are there any Linux commands that I could schedule in cron to pulse video and network adapters hourly that will keep them awake? Or, should I wait on Fedora13? Before this machine, I built a Dimension 2400 with Pentium IV and it had the same problem. Fedora9 on the same hardware is fine.

  Read the article

• network user isolation

  - by seaquest

  My question is for a network with a Linux iptables router gateway. How can it be possible to prevent inter-network traffic of those users. Think this case as a public network, IPs are distributed through linux gw and users are authenticated thru the gateway. We want to protect public users from public users. Network is not wireless and I can not use Wireless AP user isolation. Actually I have a simple method. Subnet the network into /30 mask. Give minimum IP of each subnet to the gateay and ditribute those /30 IPs from the subnet. But this is pretty costly for such an aim. I want to ask for other methods Thanks.

  Read the article

• Excel IP address and subnet to network and inverse mask [closed]

  - by Steve Dailey

  We need a script, marco or something in excel where we can take list like below interface Vlan100 ip address 192.168.1.3 255.255.255.0 interface Vlan101 ip address 192.168.2.3 255.255.255.128 interface Vlan102 ip address 192.168.2.130 255.255.255.128 interface Vlan103 ip address 192.168.3.3 255.255.255.240 etc... and produce a list like below ospf 1 undo silent-interface Vlan-interface100 undo silent-interface Vlan-interface101 undo silent-interface Vlan-interface102 undo silent-interface Vlan-interface103 area 0.0.0.0 network 192.168.1.0 0.0.0.255 network 192.168.2.0 0.0.0.127 network 192.168.2.128 0.0.0.127 network 192.168.3.0 0.0.0.15 so it will need to take an ip address/subnet mask and convert them to network number/inverse mask. I believe I can handle the Vlan manipulation with a substitution so no need to spend time on that.

  Read the article

• Accessing network resources via vpn connection failes

  - by LikeHoo

  I already found some information on this problem here, but I still can't get it to work. Im trying to access some network resources on my server via vpn over the net. Im using a win7 home pc here and a win server 2008 rc2 with installed ras&routing role on the server. For vpn authentication I use a local user on the server with vpn-access. This user also has the rights to access to the network resources, but it neither finds the server under network nor is it able to connect the network drives... In similar topics here I found out that using the same credentials for vpn-authentication and network resources access does not work, but using different user for access didn't work either. All of these examples I found were in an active directory structure, but I don't have an active directory here. Does anyone know how to solve this problem without having to use an active directory? Thanks

  Read the article

• Windows 8 doesn't automatically join Wi-Fi network if Ethernet connection is active

  - by Herb Caudill

  In Windows 7, my laptop would automatically join both an Ethernet network and the Wi-Fi network in my house (both going through the same router). In Windows 8, if the Ethernet connection is present, it doesn't join the Wi-Fi network at all. The reason I noticed this is that if Wi-Fi isn't active, I don't see my AirPlay speakers. My wireless printer is also unavailable until I manually connect to Wi-Fi. To recap: When I turn on my computer and it's connected to Ethernet, this is what my Network Connections control panel looks like: After I manually join my Wi-Fi network, it looks like this: I would prefer for it to join both networks automatically on startup, the way it did in Windows 7. Is there a way to make this happen?

  Read the article

• Cisco ASA - Unable to create "range" type of network object on 8.2

  - by j2k4j

  I'm wanting to block a range of ip addresses on my Cisco ASA 5520 (8.2) using ASDM 6.4. In the help files/cisco documentation, it says, just create a network object with a "range" type, and use that in a blocking access rule... When I'm accessing the ASA (8.2) with ASDM 6.4, I go to configfirewallobjectnetwork objects & groups, then click "add" to add the IP range as a "network object", I get the following 4 fields to fill out: Name: IP address: Netmask: Description: That's all... In the context-sensitive help files, it says that there should be a Type drop-down to select, with "range" being one of the options, but there is no "Type" drop-down list... If I try to create a "network object group" instead of just "network object", then I get a "Type" drop down list, but it only contains two options: network & host (No "Range" option here either) Can someone help me figure out how to block a range of IP's, using the current 8.2 version on the ASA? Thanks for any pointers or tips!

  Read the article

• Can't connect back to the wireless network after the password was changed

  - by 7777

  Family changed the network password and some other network settings after new computers were brought into the house because apparently they wouldn't work with what we had. Actually an off-site tech remotely changed it, and I have no idea what he did. My laptop detects the network (it shows up under available networks) but whenever I try to connect it says: Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try to connect again. I wish I could give more details, config settings, but frankly I have no idea what I'm looking for. This is XP (also, not a password issue, I know the password, it's just that I have no idea where to enter it, etc.)

  Read the article

• Linux - Block ssh users from accessing other machines on the network

  - by Sam

  I have set up a virtual machine on my network for uni project development. I have 6 team members and I don't want them to SSH in and start sniffing my network traffic. I already have set the firewall on my W7 pcs to ignore any connection attempts from the Virtual Machine, but would like to go a step further and not allow any network access from the VM to other machines on my network. Team members will be access the VM by SSH. The only external port forwarded is to vm:22. The VM is running in VirtualBox on a bridged network connection. Running latest Debian. If someone could tell me how to do this I would be much obliged.

  Read the article

• vmware workstation - virtual network adapters missing from ipconfig, still show in networking (XP host)

  - by Adam

  Hi Folks - here's a new one for me, and my first time posting here: I installed VMWare workstation 7.1 on a new PC. VMWare properly installs the virtual network adapters under the Network Connections control panel, however for some reason they do not show up under ipconfig, which is very weird. They also don't appear anywhere in "route print". I don't have network connectivity to the VM. My guesses are perhaps some conflict with Symantec AntiVirus or Symantec Client Firewall. Tried the following things: enabling TCP/IP in the virtual network adapters (they often get installed with it disabled for some reason) Restoring defualts in the VMnetcfg gui tool (this causes an uninstall and reinstall of the virtual network adapters on the host) Re-installing vmware workstation Uninstalling checkpoint secureremote and then reinstalling vmware Just to be clear, this problem is totally on the host. In my searching for stuff about (non-vmware) adapters missing from ipconfig, I see some posts about resetting the TCP/IP stack using netsh. Looking into that next... Thanks!

  Read the article

• Corrupted network from ipad

  - by lisa

  All wireless clients were kicked off the network (3 PCs & 1 iPad). Only a PC with a wired connection was still able to connect. This morning I discovered that the network had been renamed and a new password had been assigned. Via Linksys Updater I gave a new password. Strangely, in my Windows Control Panel/Network connections our old password now exists as an unsecured network, that I cannot delete! When I attempt to connect using this bastard network, I get an Apple Push error. Linksys WRT610N PCs all using Windows 7 (wired & wireless) iPad 2

  Read the article

• large RAID 10 vs small RAID1

  - by user116399

  The machine will store and serve millions of small files (<15Kb each), and all those files require a total storage space of 400G Considering the exact same SATA hard drives maker and models, on the exact same environment (OS, cpu, ram, raid controller, etc...) which one of the setups bellow would be faster? A) RAID 1 with 2 drives of 2T each, making up total storage of 2T B) RAID 10 with 4 drives of 2T each, making up total storage of 4T [EDIT]: I'm aware RAID10 is faster than RAID1. The larger the disk, at least in theory, the longer will take to do seeks/writes. So, will the performance gain of RAID10 will be outweighed by the "drag" caused the larger disk area when seek/write operations happened?

  Read the article

• Linux: how to verify my network configuration before doing a restart

  - by wael34218

  I am trying to build a network bridge for my VMs on a server. So I added a new file and changed another in the /etc/sysconfig/network-scripts directory. Then I did a network reboot with the following command:/etc/init.d/network restart After that the server was not up again. I contacted the hosting provider's support for help. I need a way to verify my new configuration before a network restart. I need to make sure that it will be up again, just like apache's /etc/init.d/httpd configtest

  Read the article

• Taskbar Disappears Over Remote Desktop Connection When Outside Local Network

  - by CMikeB1

  I've got a machine on my home network running Windows Server 2012 (Based on Win8) and rather than attach a monitor I remote desktop in and it works fine on my local network. The problem is, when I try to access it from outside my local network the taskbar disappears completely. When I minimize an application rather than minimize to the taskbar it simply closes the window as small as it can as if the taskbar never existed (see photos at ). I've messed with the connection properties (show/hide desktop background, etc.) with no luck. I've used the following methods to remote in and they all are fine when on the local network and taskbar-less from outside: Remote Desktop Connection on Mac Remote Desktop Connection on Windows Jump Desktop on iOS using RDP To access the computer from outside my local network I'm using a Linksys router and mapping to the server IP, port 3389. See Photos: http://i.stack.imgur.com/FyUeQ.png http://i.stack.imgur.com/9MnVr.png

  Read the article

• Multiple iSCSI Targets or 1 that's shared?

  - by Joost Verdaasdonk

  On my network I have several types of files I want to save on a SAN like: SQL db's and logs Exchange data Random files Now I'm wondering if I should create one iSCSI Target with a large volume and initiate that from one of the servers. (and share it so other servers can use it too) Or I should create separate Targets to have each server use its own storage. For the record the storage could be separated because the servers aren't using the shared data. For one reason I was thinking of one storage is ease of backup. (but perhaps performance could be a problem?) What would be an advisable configuration for these type of data?

  Read the article

• Network Table assistance

  - by mitchnufc

  I am designing a small network and have came up with the following table I am just wondering if this seems right, would appreciate some feedback, thanks. Network/Router First IP Last IP Subnet Host Broadcast Router 1 162.10.0.1 162.10.0.7 255.255.255.248 162.10.0.0 162.10.0.8 Network 1 162.10.1.1 162.10.2.253 255.255.254.0 162.10.1.0 162.10.2.254 Network 2 162.10.0.9 162.10.0.14 255.255.255.248 162.10.0.8 162.10.0.15 Router 2 162.10.0.17 162.10.0.18 255.255.255.252 162.10.0.16 162.10.0.19 Network 3 162.10.0.21 162.10.0.146 255.255.255.128 162.10.0.20 162.10.0.147 Router one is the IP assigned by the ISP

  Read the article

• Wireless internet is connected to an open network but has no internet

  - by Joshua Reeder

  I just installed Ubuntu on my laptop yesterday and it connected to the wireless fine. Then I took it to school, put it on their wired connection, downloaded some stuff, and now the wireless doesn't work. At first it would detect networks, but not connect. I restarted it and now it can connect, but it acts like it doesn't have internet in the browser. Wired connection still works fine on it. I know it isn't the network because my ipad is working on the wireless connection fine. I found another solution on here switching the security settings for the wireless, but this is the apartment's wireless so they have it open, and I won't be able to mess with it at all. Here is lspci output: 00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11) 00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11) 00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11) 00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11) 00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11) 00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11) 00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11) 00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 310M] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 07:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) 16:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 20) 16:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 20) 16:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 20) 16:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 20) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04) ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04) ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04) ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04) ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04) ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04) ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04) ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04) ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04) ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04) ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04) ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04) Update: I re-installed Ubuntu 12.04 (I assumed I messed something up while toying with it) but it did not solve the problem. Eventually, I got it to work with my school's wireless internet (the default network settings were wrong), but the internet still doesn't work on my apartment's wifi (it has no security on it).

  Read the article

• Problem adding "Network Policy and Access Services" role in Server 2008

  - by Django Reinhardt

  We are encountering an Error Code 0x80070643 when attempting to add the "Network Policy and Access Services" role on a fresh Windows Server 2008 R2 installation. Is there a known solution for this problem? Here is what information we have available so far: From ServerManager.log... 2504: 2009-11-23 11:12:01.712 [CBS] installing 'IAS NT Service RasServerAll RasRoutingProtocols ' ... 2504: 2009-11-23 11:12:01.911 [CBS] ...parents that will be auto-installed: 'RasServer ' 2504: 2009-11-23 11:12:01.912 [CBS] ...default children to turn-off: '<none>' 2504: 2009-11-23 11:12:01.924 [CBS] ...current state of 'IAS NT Service': p: Staged, a: Staged, s: UninstallRequested 2504: 2009-11-23 11:12:01.924 [CBS] ...setting state of 'IAS NT Service' to 'InstallRequested' 2504: 2009-11-23 11:12:01.935 [CBS] ...current state of 'RasServerAll': p: Staged, a: Staged, s: UninstallRequested 2504: 2009-11-23 11:12:01.935 [CBS] ...setting state of 'RasServerAll' to 'InstallRequested' 2504: 2009-11-23 11:12:01.946 [CBS] ...current state of 'RasRoutingProtocols': p: Staged, a: Staged, s: UninstallRequested 2504: 2009-11-23 11:12:01.946 [CBS] ...setting state of 'RasRoutingProtocols' to 'InstallRequested' 2504: 2009-11-23 11:12:01.956 [CBS] ...current state of 'RasServer': p: Staged, a: Staged, s: UninstallRequested 2504: 2009-11-23 11:12:01.956 [CBS] ...setting state of 'RasServer' to 'InstallRequested' 2504: 2009-11-23 11:12:01.967 [CBS] ...'IAS NT Service' : applicability: Applicable 2504: 2009-11-23 11:12:01.977 [CBS] ...'RasServerAll' : applicability: Applicable 2504: 2009-11-23 11:12:01.987 [CBS] ...'RasRoutingProtocols' : applicability: Applicable 2504: 2009-11-23 11:12:01.998 [CBS] ...'RasServer' : applicability: Applicable 2504: 2009-11-23 11:12:02.906 [CbsUIHandler] Initiate: 2504: 2009-11-23 11:12:02.906 [InstallationProgressPage] Installing... 2504: 2009-11-23 11:12:54.311 [CbsUIHandler] Error: -2147023293 : 2504: 2009-11-23 11:12:54.313 [CbsUIHandler] Terminate: 2504: 2009-11-23 11:12:54.316 [InstallationProgressPage] Verifying installation... 2504: 2009-11-23 11:12:54.326 [CBS] ...done installing 'IAS NT Service RasServerAll RasRoutingProtocols '. Status: -2147023293 (80070643) 2504: 2009-11-23 11:12:54.329 [NPAS] Skipped configuration of 'Network Policy Server' because install operation failed. 2504: 2009-11-23 11:12:54.330 [NPAS] Skipped configuration of 'Remote Access Service' because install operation failed. 2504: 2009-11-23 11:12:54.330 [NPAS] Skipped configuration of 'Routing' because install operation failed. 2504: 2009-11-23 11:12:54.330 [Provider] [STAT] ---- CBS Session Consolidation ----- [STAT] For 'Network Policy Server', 'Remote Access Service', 'Routing'[STAT] installation(s) took '52.616957' second(s) total. [STAT] Configuration(s) took '0.0004948' second(s) total. [STAT] Total time: '52.6174518' second(s). From System Event Viewer... Log Name: System Source: Service Control Manager Date: 23/11/2009 11:12:23 Event ID: 7023 Task Category: None Level: Error Keywords: Classic User: N/A Computer: Av7Analytics Description: The Network Policy Server service terminated with the following error: %%-2147013892 Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" /> <EventID Qualifiers="49152">7023</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2009-11-23T11:12:23.653578500Z" /> <EventRecordID>1317</EventRecordID> <Correlation /> <Execution ProcessID="468" ThreadID="2308" /> <Channel>System</Channel> <Computer>Av7Analytics</Computer> <Security /> </System> <EventData> <Data Name="param1">Network Policy Server</Data> <Data Name="param2">%%-2147013892</Data> </EventData> </Event> From Setup Event Viewer... Log Name: Setup Source: Microsoft-Windows-ServerManager Date: 23/11/2009 11:12:56 Event ID: 1616 Task Category: None Level: Error Keywords: User: AV7ANALYTICS\RenamedAdmin Computer: Av7Analytics Description: Installation failed. Roles: Network Policy and Access Services Error: Attempt to install Network Policy Server failed with error code 0x80070643. Fatal error during installation Error: Attempt to install Remote Access Service failed with error code 0x80070643. Fatal error during installation Error: Attempt to install Routing failed with error code 0x80070643. Fatal error during installation The following role services were not installed: Network Policy Server Routing and Remote Access Services Remote Access Service Routing Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-ServerManager" Guid="{8C474092-13E4-430E-9F06-5B60A529BF38}" /> <EventID>1616</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x4000000000000000</Keywords> <TimeCreated SystemTime="2009-11-23T11:12:56.046431200Z" /> <EventRecordID>115</EventRecordID> <Correlation /> <Execution ProcessID="2504" ThreadID="2344" /> <Channel>Setup</Channel> <Computer>Av7Analytics</Computer> <Security UserID="S-1-5-21-2753803390-1569373846-1208217686-500" /> </System> <UserData> <EventXML xmlns:auto-ns3="http://schemas.microsoft.com/win/2004/08/events" xmlns="Event_NS"> <message> Roles: Network Policy and Access Services Error: Attempt to install Network Policy Server failed with error code 0x80070643. Fatal error during installation Error: Attempt to install Remote Access Service failed with error code 0x80070643. Fatal error during installation Error: Attempt to install Routing failed with error code 0x80070643. Fatal error during installation The following role services were not installed: Network Policy Server Routing and Remote Access Services Remote Access Service Routing </message> <identifiers>14, 206, 207, 208, 205</identifiers> </EventXML> </UserData> Thanks in advance for any help. It's quite shocking that we're already having problems with Microsoft's "latest and greatest".

  Read the article

• Norton Ghost EBAB03F1: The specified network name is no longer available

  - by Breck Carter

  After about 15 minutes, a Norton Ghost 14 backup fails with Error EBAB03F1: The specified network name is no longer available. The source computer is a P4 laptop running Windows XP SP3. The target computer is a Core2 Quad desktop running Windows Vista Ultimate 64bit. It does not help to disable Norton 360 on the source computer or Norton Antivirus 2008 on the target computer. The Event Viewer consistently shows the same two VSS-related errors after Norton Ghost starts but before it fails. It makes no difference if the VSS service is started or stopped. The VSS errors do not appear elsewhere in the event log, only after Ghost starts. The MSS event messages, however, are quite common, appearing throughout the log, and they may have nothing to do with the problem. Here is the Norton Ghost error display... -Errors exist. --Unable to write to file. ---Error EBAB03F1: The specified network name is no longer available. ---Unable to set file size. ----Error EBAB03F1: The specified network name is no longer available. ----Unable to write to file. -----Error EBAB03F1: The specified network name is no longer available. -----Unable to set file size. ------Error EBAB03F1: The specified network name is no longer available. Here are the source computer events, with the final error at the top and the "Ghost Starting" message at the bottom: ===== Event Type: Error Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:40:26 AM User: N/A Computer: PAVILION2 Description: Error EC8F17B7: Cannot create recovery points for job: Drive Backup of (C:\) (3). Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Details: 0xEBAB0005 Source: Norton Ghost ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 3421 Date: 11/09/2009 Time: 9:34:06 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Recovery completed for database ReportServer$SQLEXPRESSTempDB (database ID 6) in 1 second(s) (analysis 205 ms, redo 0 ms, undo 376 ms.) This is an informational message only. No user action is required. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 5d 0d 00 00 0a 00 00 00 ]....... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 17137 Date: 11/09/2009 Time: 9:34:02 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Starting up database 'ReportServer$SQLEXPRESSTempDB'. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: f1 42 00 00 0a 00 00 00 ñB...... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 12302 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: An internal inconsistency was detected in trying to contact shadow copy service writers. Please check to see that the Event Service and Volume Shadow Copy Service are operating properly. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 42 55 45 43 58 4d 4c 43 BUECXMLC 0008: 33 36 33 37 00 00 00 00 3637.... 0010: 42 55 45 43 58 4d 4c 43 BUECXMLC 0018: 33 36 30 37 00 00 00 00 3607.... ===== Event Type: Information Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:27:57 AM User: N/A Computer: PAVILION2 Description: Info 6C8F1F63: The drive-based backup job, Drive Backup of (C:\) (3), has been started manually. Details: Source: Norton Ghost

  Read the article

• Windows Server 2008 R2 network adapter stops working, requires hard reboot

  - by Geoff Dalgas

  TL;DR version: Turns out this was a Windows Server 2008 R2 kernel networking bug. After siccing Microsoft support on it, we (eventually) got an unpublished kernel hotfix from Microsoft to address it. If you, too, are experiencing mysterious low-level network driver failures requiring a reboot/bluescreen cycle, you might want that hotfix (or maybe Service Pack 1 whenever it is released, too.) We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps. Switch Virtualization providers On the off chance this was related to Hyper-V in some way (we do host Linux VMs on it), we switched to VMWare Server. No change. Switch host model We've reached the end of our troubleshooting rope and are now formally involving Microsoft support. They recommended changing the host model: http://en.wikipedia.org/wiki/Host_model http://technet.microsoft.com/en-us/magazine/2007.09.cableguy.aspx We did that, and.. we'll see.

  Read the article

• SQL SERVER – SHRINKFILE and TRUNCATE Log File in SQL Server 2008

  - by pinaldave

  Note: Please read the complete post before taking any actions. This blog post would discuss SHRINKFILE and TRUNCATE Log File. The script mentioned in the email received from reader contains the following questionable code: “Hi Pinal, If you could remember, I and my manager met you at TechEd in Bangalore. We just upgraded to SQL Server 2008. One of our jobs failed as it was using the following code. The error was: Msg 155, Level 15, State 1, Line 1 ‘TRUNCATE_ONLY’ is not a recognized BACKUP option. The code was: DBCC SHRINKFILE(TestDBLog, 1) BACKUP LOG TestDB WITH TRUNCATE_ONLY DBCC SHRINKFILE(TestDBLog, 1) GO I have modified that code to subsequent code and it works fine. But, are there other suggestions you have at the moment? USE [master] GO ALTER DATABASE [TestDb] SET RECOVERY SIMPLE WITH NO_WAIT DBCC SHRINKFILE(TestDbLog, 1) ALTER DATABASE [TestDb] SET RECOVERY FULL WITH NO_WAIT GO Configuration of our server and system is as follows: [Removed not relevant data]“ An email like this that suddenly pops out in early morning is alarming email. Because I am a dead, busy mind, so I had only one min to reply. I wrote down quickly the following note. (As I said, it was a single-minute email so it is not completely accurate). Here is that quick email shared with all of you. “Hi Mr. DBA [removed the name] Thanks for your email. I suggest you stop this practice. There are many issues included here, but I would list two major issues: 1) From the setting database to simple recovery, shrinking the file and once again setting in full recovery, you are in fact losing your valuable log data and will be not able to restore point in time. Not only that, you will also not able to use subsequent log files. 2) Shrinking file or database adds fragmentation. There are a lot of things you can do. First, start taking proper log backup using following command instead of truncating them and losing them frequently. BACKUP LOG [TestDb] TO  DISK = N'C:\Backup\TestDb.bak' GO Remove the code of SHRINKING the file. If you are taking proper log backups, your log file usually (again usually, special cases are excluded) do not grow very big. There are so many things to add here, but you can call me on my [phone number]. Before you call me, I suggest for accuracy you read Paul Randel‘s two posts here and here and Brent Ozar‘s Post here. Kind Regards, Pinal Dave” I guess this post is very much clear to you. Please leave your comments here. As mentioned, this is a very huge subject; I have just touched a tip of the ice-berg and have tried to point to authentic knowledge. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Backup and Restore, SQL Data Storage, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SQL SERVER – Attach mdf file without ldf file in Database

  - by pinaldave

  Background Story: One of my friends recently called up and asked me if I had spare time to look at his database and give him a performance tuning advice. Because I had some free time to help him out, I said yes. I asked him to send me the details of his database structure and sample data. He said that since his database is in a very early stage and is small as of the moment, so he told me that he would like me to have a complete database. My response to him was “Sure! In that case, take a backup of the database and send it to me. I will restore it into my computer and play with it.” He did send me his database; however, his method made me write this quick note here. Instead of taking a full backup of the database and sending it to me, he sent me only the .mdf (primary database file). In fact, I asked for a complete backup (I wanted to review file groups, files, as well as few other details).  Upon calling my friend,  I found that he was not available. Now,  he left me with only a .mdf file. As I had some extra time, I decided to checkout his database structure and get back to him regarding the full backup, whenever I can get in touch with him again. Technical Talk: If the database is shutdown gracefully and there was no abrupt shutdown (power outrages, pulling plugs to machines, machine crashes or any other reasons), it is possible (there’s no guarantee) to attach .mdf file only to the server. Please note that there can be many more reasons for a database that is not getting attached or restored. In my case, the database had a clean shutdown and there were no complex issues. I was able to recreate a transaction log file and attached the received .mdf file. There are multiple ways of doing this. I am listing all of them here. Before using any of them, please consult the Domain Expert in your company or industry. Also, never attempt this on live/production server without the presence of a Disaster Recovery expert. USE [master] GO -- Method 1: I use this method EXEC sp_attach_single_file_db @dbname='TestDb', @physname=N'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\TestDb.mdf' GO -- Method 2: CREATE DATABASE TestDb ON (FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\TestDb.mdf') FOR ATTACH_REBUILD_LOG GO Method 2: If one or more log files are missing, they are recreated again. There is one more method which I am demonstrating here but I have not used myself before. According to Book Online, it will work only if there is one log file that is missing. If there are more than one log files involved, all of them are required to undergo the same procedure. -- Method 3: CREATE DATABASE TestDb ON ( FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\TestDb.mdf') FOR ATTACH GO Please read the Book Online in depth and consult DR experts before working on the production server. In my case, the above syntax just worked fine as the database was clean when it was detached. Feel free to write your opinions and experiences for it will help the IT community to learn more from your suggestions and skills. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, Readers Question, SQL, SQL Authority, SQL Backup and Restore, SQL Data Storage, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• How to Route Traffic in Case PPTP Remote Client is on Same Subnet as Server

  - by Marcus Cole

  I've a PPTP server setup on my local home network (192.168.1.0/24, pfSense). Now sometimes when I'm away and want to connect remotely my client (Windows 7) is also on the same network because e.g. the hotel has set it up the same way. Thus the connection works, but I can't reach any PC on my home network because everything is routed directly to the client local router which is in the same subnet. Is there a way to work around this by messing with a configuration or adapting Windows routing table, i.e. without modifying either network?

  Read the article

• How to configure wireless in gentoo?

  - by Absolute0

  I have a single access point which i want to connect to on interface ra0, when I run /etc/init.d/ra0 restart I get the following output: gentoo ~ # /etc/init.d/net.ra0 restart * Starting ra0 * Configuring wireless network for ra0 Error for wireless request "Set Mode" (8B06) : SET failed on device ra0 ; Network is down. * ra0 does not support setting the mode to "managed" Error for wireless request "Set Encode" (8B2A) : SET failed on device ra0 ; Network is down. * ra0 does not support setting keys * or the parameter "mac_key_roswell" or "key_roswell" is incorrect Error for wireless request "Set Mode" (8B06) : SET failed on device ra0 ; Network is down. * ra0 does not support setting the mode to "managed" * WEP key is not set for "BAY_WiFi" - not connecting * Couldn't associate with any access points on ra0 * Failed to configure wireless for ra0 when I run iwlist ra0 scan I get "roswell" and "bay-wifi" I want to connect to only roswell. Here is my /etc/conf.d/net: modules= ( "iwconfig" ) key_roswell="ffff-ffff-ff" # no s: means a hex key preferred_aps=( "roswell" ) what am i doing wrong?

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >