Search Results

Search found 3617 results on 145 pages for 'physical wear'.

Page 72/145 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Isolating VMware virtual machines from the network

  - by jetboy

  I have: VMware Workstation 7 running on a Windows 7 box (with a single NIC), with multiple virtual machines running a range of OSs. The host box is connected to a WRT54G router running Tomato firmware. The router is acting as a wireless bridge to another WRT54G that's wired to my broadband modem. I can access the VMs externally via VNC using VMware's Remote Display. Over time I've had these running: a. Using NAT networking (single IP) with port forwarding on the router and a custom port in VMware for each VM. b. Using bridged networking with static IPs assigned to each VM via MAC address, and port forwarding on the router to each IP running with standard ports. Either way, the host box, and other physical machines on the network are accessible from the VMs. Is there a way to isolate the VMs from the rest of the network, but still maintain internet access and remote VNC to the VMs?

  Read the article

• Centos Xen resizing DomU partition and volume group

  - by thepearson

  I have a setup like so: Dom0 LV | DomU Physical Disk | | XVDA1 XVDA2 (/boot) (DomU PV) | VolGroup00 (DomU VG) | | LogVol00 LogVol01 (swap) (/) I am trying to resize the DomU root Filesystem. (VolGroup00-LogVol01) I realize that I now need to resize the partition XVDA2, however when I try doing this with parted on Dom0 it just tells me "Error: Could not detect file system." So to resize the root part VolGroup-LogVol00 shouldn't the process be: # Shut down DomU xm shutdown domU #Resize Dom0 Logical volume lvextend -L+2G /dev/volumes/domU-vol # Parted parted /dev/volumes/domU-vol # Resize root partition resize 2 START END (This is where I get an error) "Error: Could not detect file system." # add the vm volume group to Dom0 lvm kpartx -a /dev/volumes/domU-vol # resize the domU PV pvresize /dev/mapper/domU-pl (as listed in pvdisplay) # The domU volume group should automatically adjust # resize the DomU lv lvextend -L+2G /dev/VolGroup/LogVol00 And then obviously increase the fs, remove the device from kpartx etc The problem is I dont know how to resize the partition? How do I resize this partition so I can run pvresize on the DomU? Thanks

  Read the article

• Dedicated NIC or dedicated port for iSCSI?

  - by Newt

  When spec'ing and configuring a machine that will utilise shared iSCSI storage, I've read a lot of documentation which suggests a dedicated network adapter should be used for iSCSI communication. That makes a lot of sense and I have no problem with it. The question I do have, is this - should that suggestion be taken to mean that a separate physical NIC should be used, or will a dedicated port/ports on a dual/quad port NIC be just as good? My suspicion is that simply using dedicated port(s) on a shared NIC would be just as good. Any input greatly appreciated.

  Read the article

• Host name resolution on a home network

  - by Kris

  Hi, I have several machines (both virtual and physical) in my internal network at home. Currently I have to connect via 1P addresses. The one main machine I connect with to all the other machines is running Windows Vista. Is there a way I can have some sort of DNS capability inside my network as well so I can refer to these machines with a name? I think this would be a common problem in most households (running a few computers) and I think there might be some simple solutions out there. This would be something most routers should support out of the box - but why don't they? Can anyone recommend some of these or an easy way to accomplish this?

  Read the article

• Host name resolution on a home network

  - by Kris

  Hi, I have several machines (both virtual and physical) in my internal network at home. Currently I have to connect via 1P addresses. The one main machine I connect with to all the other machines is running Windows Vista. Is there a way I can have some sort of DNS capability inside my network as well so I can refer to these machines with a name? I think this would be a common problem in most households (running a few computers) and I think there might be some simple solutions out there. This would be something most routers should support out of the box - but why don't they? Can anyone recommend some of these or an easy way to accomplish this?

  Read the article

• Welcome files are not loaded! Need help with Railo, mappings and J2EE configuration!

  - by mrt181

  I have installed a J2EE Server (tried it with Glassfish3, Tomcat6 and Resin4) on Win7 64bit and deployed Railo3.1. I have then added a virtual host to the J2EE server, i.e. Resin: <host host-name="railo"> C:/resin/webapps/railo In the Railo Admin i have added this mapping: Virtual Physical / C:/webapps/ When i access http://railo:8080/ my index.cfm welcome file in C:/webapps/ is loaded (index.cfm is definded in Railos web.xml). When i try to access http://railo:8080/test which contains the same index.cfm i get an 500 Servlet Exception java.io.FileNotFoundException: C:\webapps\test (access denied) (on all J2EE Servers i tried so far). http://railo:8080/test/index.cfm works fine. I already tried to add index.cfm to Resins welcome-file-list in app-default.xml to no avail. I want to be able to access deployed apps without this url: http://localhost:8080/app/ Instead i want to use this: http://app:8080/

  Read the article

• Multiple VLANs, multiple subnets, single DHCP server?

  - by EightQuarterBit

  Hey guys! At my job we are prepping to transition from multiple LANs connected over slow VPN connections to a single MAN connected over fiber, and I've got a few questions. First of all, we are planning on making each physical site its own VLAN, but we would like to have a single DHCP server at the data center hand out IPs to each VLAN. We've pretty much got the VLAN tagging structure all worked out, but we would like to have our single DHCP server assign different subnets of IPs to each VLAN. For instance, VLAN 2 gets 10.0.2.x through 10.0.4.x, VLAN 3 gets 10.0.5.x through 10.0.7.x etc. We are an Active Directory based shop and we have a Server 2003 box handling DHCP (though we aren't averse to upgrading it to server 2008.) Is this feasible, or am I pipe-dreaming?

  Read the article

• IPFW not locking people out

  - by Cole

  I've had some brute-forcing of my ssh connection recently, so I got fail2ban to hopefully prevent that. I set it up, and started testing it out by giving wrong passwords on my computer. (I have physical access to the server if I need to unblock myself) However, it never stops me from entering passwords. I see in /var/log/fail2ban.log that fail2ban kicked in and banned me, and there's a ipfw entry for my IP, but I'm not locked out. I've changed the configuration around, and then tried just using the ipfw command myself, but nothing seems to lock me out. I've tried the following blocks: 65300 deny tcp from 10.0.1.30 to any in 65400 deny ip from 10.0.1.30 to any 65500 deny tcp from 10.0.1.30 to any My firewall setup has a "allow ip from any to any" rule after these though, maybe that's the problem? I'm using Mac OS 10.6 (stock ipfw, it doesn't seem to have a --version flag) Thanks in advance.

  Read the article

• How to move 100mb hidden system reserved partition on Windows Server 2008 R2 to other drive?

  - by Artyom Krivokrisenko

  Hello! I have a server with two 1.5TB hard drives. I was going to install a Windows Server 2008 R2 and create software RAID1 using Windows Disk Management Utility. I instaleld Windows, open this console and that is what I see: http://i.imgur.com/KoC9a.png Setup program created a System Reserved Partition at my second HDD. I don't understand now, how can I create RAID1, because space, which supposed to be used for copy of disk C, now is used for this hidden partition. So is there any way now to create correct RAID1? May it is possible to move this partition to the Disk 0, where I have plenty of free space? Unfortunately I can't reinstall Windows and apply other options at the disk management step of the installation, because installation image is not longer connected to the server and I have no physical access to server, only remote desktop.

  Read the article

• How to monitor CPU usage and performance on a Hyper-V server with several VM's

  - by Bjørn

  Hello, I have a server that is running Windows 2008 64 bit Hyper-V, with 8 gigs of RAM and Intel Xeon X3440 @ 2.53 Ghz, which gives me 8 logical cores in the performance monitor on the host system. I have set up three Virtual Machines, all running Windows 2008 32 bit. Build server, running Team City Staging server SQL Server, running SQL Server 2005 I have some troubles with the setup in that the host monitor remains responsive at all times, even though the VM's are seemingly working at 100% cpu and are very sluggish and unresponsive. (I have asked a separate question about that.) So the question here is: What is the best way to monitor how the physical CPU's are actually utilized? The reason I am asking is that I am being told that i cannot reliably use the task manager to monitor CPU usage in a VM.

  Read the article

• Workaround to extend limited screen real-estate on Windows?

  - by Brian

  I need a means to use a software tool that requires at least 900 pixels of vertical resolution (as in, the "OK" button to save settings won't be reachable on smaller displays) on a laptop/projector with only 768 pixels of vertical resolution for a training session. So far the only workaround that's been suggested is to memorize the number of tab stops to reach the "OK" and "Cancel" buttons. Any suggestions on a better workaround? What I'd like to see is a utility that would let me treat the physical display as a 1024x768 view port into a larger, virtual display area. Does anything like that exist? Anything else that might help?

  Read the article

• Static NAT in AWS's Virtual Private Cloud (VPC)

  - by user1050797

  Currently in a VPC with a public and a private subnet, all internet bound traffic from the private subnet could be routed via an NAT instance. The NAT instance will port address translate the packet's source IP to use the NAT instance's elastic IP, so the public server can reply to this public address. This is a PAT mechanism. My question is there a way for me to do a static NAT on my NAT instance -- Using the same NAT instance to static NAT an unassociated but reserved elastic IP to a private subnet host. This NAT instance will behave like a physical firewall doing static nat'ing for a bunch of private ip's.

  Read the article

• Multiple Ubuntu Server SSH Connections

  - by Craig Smith

  I'm trialing a ubuntu server 12.04 LTS to replace a Windows Server that I use but I have got a little stuck with SSH I'm currently able to SSH into the server but I need to have multiple persistent SSH connections as I have at least 3 applications that need to run in the server and still be able to access their terminals to issue commands to the applications. At the moment this is fine if I use the physical terminals of the machine as I can just jump between the three terminals I use but remotely doing this is the issue. As I'm not entirely familiar with this side of linux I'm not sure if this is even possible to do or how to even get around this issue.

  Read the article

• PHP FastCGI HTTP Error 500 on Windows 7

  - by CJM

  I've just installed PHP (5.3.1) and MySQL (5.1.44) on my development machine. Then I used the Web Platform Installer to install a copy of Joomla and Drupal. However, when I tried to browse either site application, I get a HTTP Error 500: Module FastCgiModule Notification ExecuteRequestHandler Handler PHP_via_FastCGI Error Code 0x00000000 Requested URL http://localhost:808/drupal/index.php Physical Path D:\Projects\drupal\index.php Logon Method Anonymous Logon User Anonymous PHPInfo.php reports that FastCGI is configured (not sure if that is significant). Sure the fact that PHPInfo.php reports anything is perhaps an indication that PHP itself is working...? I'm struggling to know where to look for a solution... Each application appears to be configure similarly to my other [ASP/ASP.NET] applications.

  Read the article

• Recovering database files from a corrupted VHD

  - by Apocalypse9

  We have a SQL server hosted on a virtual machine. Our hosting company updated/restarted the server and for some reason the virtual machines became unbootable. We've spoken to Microsoft and used a few higher level tools to attempt to recover the virtual machines but were unsuccessful. In browsing the file system the database folder doesn't even appear. I'm wondering if there are any lower level tools that might be able to find and copy the database files. As far as I know the physical hard drive is ok, so I'm hoping there may be some way to recover the files themselves even if the rest of the virtual machine file-system is a loss. Obviously we're in a bit of a bind, and any help/ suggestions are very much appreciated.

  Read the article

• Can a power failure or forceful shutdown damage hardware?

  - by Vilx-

  In an unrelated Internet forum I got into a discussion about hardware damage from forceful shutdowns (holding the power button for 5 seconds) and power failures. I was in the opinion that normal PC hardware does not suffer from this - after all, it's not much different than what they experience under a standard shutdown. But another person thought that it could do physical harm to the hard drive and possibly other components as well. He also said that the journaling features of filesystems are useless in face of power failures and were intended to help mitigate damage from system crashes. Now... I think this is nonsense, but then again I lack the experience and knowledge to say it with certainty. Perhaps someone else is more knowledgeable in this area and can shed light on this burning issue? :)

  Read the article

• allowing 2 VM's to communicate RED HAT 64 bit

  - by ????? ????????

  My physical PC is running 2 VMs on virtualbox. Both of the VM's are linux 64 bit. I am going through this tutorial: http://www.cyberciti.biz/faq/rhel-centos-fedoracore-linux-network-card-configuration/ in order to expose both of their IP's so that they can speak to each other. Mike Schwager November 25, 2009 at 10:55 pm Whoops! In section 3, you forgot about editing /etc/hosts. I believe RedHat comes complete with the system’s host ip address set up in /etc/hosts. Don’t forget to give it a look. I agree with Mike because after I looked into the /etc/hosts files, it has just default localhost stuff in it. How should I reconfigure the hosts file?

  Read the article

• CPU's on Hyper-V host system is just idling, even though VM's are at full throttle

  - by Bjørn

  Hello, I have a server that is running Windows 2008 64 bit Hyper-V, with 8 gigs of RAM and Intel Xeon X3440 @ 2.53 Ghz, which gives me 8 logical cores in the performance monitor on the host system. I have set up three Virtual Machines, all running Windows 2008 32 bit. Build server, running Team City Staging server SQL Server, running SQL Server 2005 These three machines are running very sluggishly, they are at 100% cpu even though the host system is barely using any cpu at all, typically below 10% total. Could anyone please give some tips as to the best setup for CPU allocating? Should I have set each server to have two cores, or should I increase this number above the total number of cores on the host? What is a good number to set on the Virtual Machine Reserve and Virtual Machine Limit? Is 8 gigs of physical RAM insufficient for 3 VM's? Thanks for reading. :)

  Read the article

• Intel 520 SSD drives not working with lsi controller on VMware esxi 5

  - by Michael

  We have a problem with our LSI 9266 controller. LSI have vmware drivers which normally show the health status of connected drives, raid controller, battery etc from within the vSphere Client. This driver also allows connectivity from the LSI MSM utility from a windows workstation. The problem is as soon as I connect my intel 520 SSD drives the health status in the vsphere client disappears, also we lose connectivity via the LSI MSM utlity. Any other drives we test are fine, 1TB SAS drives, other SSD drives etc are all OK. The Intel drives are on the compatability list and are supported by LSI but dont work with the VMware driver. If I install a windows OS on the physical server we have no problems. I have logged a ticket with LSI but they havent been very helpful. I am trying to find other people that may have had the same issue and maybe even a fix

  Read the article

• Continuing permissions issues - ASP.net, IIS 7, Server 2008 - 0x80070005 (http 500.19) error

  - by Re-Pieper

  I created an ASP.net MVC developed web application and I am trying to set up IIS. The Error: Http error 500.19, error code 0x80070005, Cannot read configuration file due to insufficient permissions, config file: C:\inetpub\wwwroot\BudgetManagerMain\BudgetManager\web.config If I set the AppPool to use 'administrator' i have no problems and can access the site just fine. If i set to NETWORK SERVICE (or anything else including self-created admin or non-admin user accounts), i get the above error. Things I have tried: identity for Application pool named 'test' is 'NetworkService' Set full access privs for wwwroot and all children files/folders verified effective permissions and NETWORK SERVICE has full access. Authentication on my site is set for anonymous and running under Application Pool Identity I do not have any physical path credentials set on the website confirmed website is set to run under the application pool named 'test' using Process Monitor, here is a summary of what i found on the ACCESS DENIED event EVENT TAB: Class: File System Operation: CreateFile Result: Access Denied Path: ..\web.config Desired Access: Generic Read Disposition: Open Options: Sybnchronous IO Non-Alert, Non-Directory file Attributes: N ShareMode: Read AllocaitonSize: n/a PROCESS TAB ...lots of stuff that seems irrelevant User: NT AUTHORITY\NETWORK SERVICE

  Read the article

• OOM-Killer, jboss and kernel panic

  - by user32425

  Hi, We are running RedHat 3.4.6(x32) on VMWareEsx3.5(x64) with 6GB RAM. A few java processes(including jboss) are running in the background. The problem is that the java processes consume lots of memory, and sometimes they are killed by the OOM-killer. When OOM-killer is about to act, the free physical memory is very low 100MB-200MB, but the swap is not used (99% free). Sometimes this causes a kernel panic too. So why isn't the swap used? How to investigate this kernel panic? Is using 6GB memory on 32bit Redhat wise? Thanks

  Read the article

• Trying to find the life expectancy of an unused flash card like SD

  - by wsams

  I read in the What's the life expectancy of an SD card? post SD cards are rated to hold data at something like 10 years sitting idle. I recall reading (not sure where) about re-energizing cards by occasionally inserting into a reader. Everything I read rates in read/write cycles and not physical decay. I'm wonder if buying a new sd card for every photo shoot would be beneficial if I could store the cards in a lock box? I was hoping for something much longer. Does anyone else agree with 10 years or maybe something more?

  Read the article

• Duplicate IP address detection with multiple NICs

  - by sfink

  I am using arping -D to detect duplicate IP addresses within a network when setting up servers. (The network is controlled by someone else, and we have had many issues with IP allocation in the past.) It works fine as long as my host has a single NIC on a given VLAN, but when my host has more than one (I have one with 9 NICs on one VLAN and 1 on the other), arping -D always returns false collisions. The problem is that all 9 of my NICs respond to an ARP request for any of the IPs on those NICs. (These are real physical NICs, not aliases or anything.) I send out one ARP request packet, and get 9 ARP is-at ARP replies, one for each MAC address. I could implement my own solution by sniffing packets and checking for any replies with a MAC address other than the local NICs', but it seems like there ought to be an easier way.

  Read the article

• SAN typical MTBF

  - by Adrian K

  We're using a SAN on a project at work, and there's a bit of debate around the fact that's technically it's a Single Point of Failure. No one seems to have any hard data. The SAN in question is a single physical box, but with internal redundant components (sorry - not sure3 what level of RAID it has, but I can find out). What's the tyopical MTBF for a SAN? The PM has it down on the projects risk register as "Quite Common' - I've never heard of a SAN going down, but I don't jhave any stats to show how likely it really is. Does anyone have any helpful info?

  Read the article

• Back up Windows 2008 SBS to iSCSI disk

  - by Farseeker

  I've almost no experience with SBS 2008, so please excuse my noob question! SBS 2008 only has the most basic backup utility built in as far as I can tell (similar to Vista), and it will only back up to physical volumes. I've read that you can set up a batch task to backup to a network volume, but right now I just need to get something deployed ASAP. We have an iSCSI target with plenty of free space. Is it worth backing up to an iSCSI target? Or am I wasting my time? If I need to do a recovery from the iSCSI disk, how would I go about it?

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >