Search Results

Search found 11259 results on 451 pages for 'remote registry'.

Page 72/451 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• OpenVPN Error : TLS Error: local/remote TLS keys are out of sync: [AF_INET]

  - by Lucidity

  Fist off thanks for reading this, I appreciate any and all suggestions. I am having some serious problems reconnecting to my OpenVPN client using Riseup.net's VPN. I have spent a few days banging my head against the wall in attempts to set this up on my iOS devices....but that is a whole other issue. I was however able to set it up on my Mac OS X specifically on my Windows Vista 32 bit BootCamp VM with relatively little trouble. To originally connect I only had to modify the recommended Config file very slightly (Config file included at the end of this post): - I had to enter the code directly into my config file - And change "dev tap" to "dev tun" So I was connected. (Note - I did test to ensure the VPN was actually working after I originally connected, it was. Also verified the .pem file (inserted as the coding in my config file) for authenticity). I left the VPN running. My computer went to sleep. Today I went to use the internet expecting (possibly incorrectly - I am now unsure if I was wrong to leave it running) to still be connected to the VPN. However I saw immediately I was not. I went to reconnect. And was (am) unable to. My logs after attempting to connect (and getting a connection failed dialog box) show everything working as it should (as far as I can tell) until the end where I get the following lines: Mon Sep 23 21:07:49 2013 us=276809 Initialization Sequence Completed Mon Sep 23 21:07:49 2013 us=276809 MANAGEMENT: >STATE:1379995669,CONNECTED,SUCCESS, OMITTED Mon Sep 23 21:22:50 2013 us=390350 Authenticate/Decrypt packet error: packet HMAC authentication failed Mon Sep 23 21:23:39 2013 us=862180 TLS Error: local/remote TLS keys are out of sync: [AF_INET] VPN IP OMITTED [2] Mon Sep 23 21:23:57 2013 us=395183 Authenticate/Decrypt packet error: packet HMAC authentication failed Mon Sep 23 22:07:41 2013 us=296898 TLS: soft reset sec=0 bytes=513834601/0 pkts=708032/0 Mon Sep 23 22:07:41 2013 us=671299 VERIFY OK: depth=1, C=US, O=Riseup Networks, L=Seattle, ST=WA, CN=Riseup Networks, [email protected] Mon Sep 23 22:07:41 2013 us=671299 VERIFY OK: depth=0, C=US, O=Riseup Networks, L=Seattle, ST=WA, CN=vpn.riseup.net Mon Sep 23 22:07:46 2013 us=772508 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Mon Sep 23 22:07:46 2013 us=772508 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Mon Sep 23 22:07:46 2013 us=772508 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Mon Sep 23 22:07:46 2013 us=772508 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Mon Sep 23 22:07:46 2013 us=772508 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSA So I have searched for a solution online and I have included what I have attempted below, however I fear (know) I am not knowledgeable enough in this area to fix this myself. I apologize in advance for my ignorance. I do tech support for a living, but not this kind of tech support unfortunately. Other notes and troubleshooting done - - Windows Firewall is disabled completely, as well as other Anti-virus programs - Tor is disabled completely - No Proxies running - Time is correct in all locations - Router Firmware is up to date - Able to connect to the internet and as far as I can tell all necessary ports are open. - No settings have been altered since I was able to connect successfully. - Ethernet as well as wifi connections attempted, resulted in same error. Also tried adding the following lines to my config file (without success or change in error): persist-key persist-tun proto tcp (after reading that this error generally occurs on UDP connections, and is extremely rare on TCP) resolv-retry infinite (thinking the connection may have timed out since the issues occurred after leaving VPN connected during about 10 hrs of computer in sleep mode) All attempts resulted in exact same error code included at the top of this post. The original suggestions I found online stated - (regarding the TLS Error) - This error should resolve itself within 60 seconds, or if not quit wait 120 seconds and try again. (Which isnt the case here...) (regarding the Out of Sync" error) - If you continue to get "out of sync" errors and the link does not come up, then it means that something is probably wrong with your config file. You must use either ping and ping-restart on both sides of the connection, or keepalive on the server side of a client/server connection, in order to gracefully recover from "local/remote TLS keys are out of sync" errors. I wouldn't be surprised if my config file is lacking, or not correct. However I can confirm I followed the instructions to a tee. And was able to connect originally (and have not modified my settings or config file since I was able to connect to when the error began occurring). I have a very simple config file: client dev tun tun-mtu 1500 remote vpn.riseup.net auth-user-pass ca RiseupCA.pem redirect-gateway verb 4 <ca> -----BEGIN CERTIFICATE----- [OMITTED] -----END CERTIFICATE----- </ca> I would really appreciate any help or suggestions. I am at a total loss here, I know I'm asking a lot here. Though I am a new user on this site I help others on many forums including Microsoft's support community and especially Apple's support communities, so I will definitely pass on anything I learn here to help others. Thanks so so so much in advance for reading this.

  Read the article

• LogonUser using LOGON32_LOGON_NEW_CREDENTIALS works against remote untrusted domain machine

  - by Jiho Han

  So between the two machines, there is no trust - they are in different domains. I've successfully connected to the remote machine using LogonUser API using logon type, *LOGON32_LOGON_NEW_CREDENTIALS*. I am able to retrieve the content of a directory using the UNC share, and create a file stream to "download" the file. So far so good. The only issue is that it seems, LogonUser fails unless there is an already open session. Let me clarify that. I found that the ASP.NET MVC page was not working this morning, specifically the page that retrieves the file list from this remote machine using LogonUser. I look at the log and I see in the stacktrace, *System.IO.__Error.WinIOError* above Directory.GetFiles call. I then remoted into the web server and tried to open the remote folder in the explorer using the same login/password used by the web site. It went through and I could see the files. I opened up the command prompt, type in net use, and I see that there is an open connection to the remote machine. Then I went back to the page and suddenly the page is working again. So, at this point, I am not exactly sure if the LogonUser is working as expected or not. If the call requires that a network connection opened first by other means, then this is certainly not satisfactory. Does anyone know what may be happening or suggest a workaround?

  Read the article

• How to connect remote EJB module from application client

  - by Zeck

  Hi guys, I have a EJB module in remote Glassfish server and application client in my computer. I want to connect from the application client to the remote EJB. Here is the my EJB interface: @Remote public interface BookEJBRemote { public String getTitle(); } Here is the my ejb: @Stateless public class BookEJB implements BookEJBRemote { @Override public String getTitle() { return "Twenty Thousand Leagues Under the Sea"; } } I have several questions : Can I use Dependency Injection in the remote application client to connect to the ejb? If so what can i do to achieve this. Do i need to configure in the sun-ejb-jar.xml and sun-application-client.xml? In other words, if i use DI like @EJB MyEJBRemote ejb; How application client container know what ejb to be injected? Where should i specify the information? How can i run the application client? I tried to run package-appclient in the glassfish server to get appclient.jar and copy it to my computer. Then i type appclient.jar -client myAppClient.jar . It didn't work. How do i point the target server? if i cannot use DI in the client then i guess i have to use JNDI lookup. Do i need to configure jndi name in sun-ejb-jar.xml or in the sun-application-client.xml? No matter how i try i never manage to run application client ? Can you guys put some working example? And thank you for every advises and examples?

  Read the article

• ant ftp task "Could not date test remote file"

  - by avok00

  Hi guys! I am using Ant ftp task to deploy my project files to a remote app server. Ant is not able to detect the date of the remote file and it re-uploads all files every time. When I start Ant in debug mode it says: [ftp] checking date for mailer.war [ftp] Could not date test remote file: mailer.war assuming out of date. The remote server is MS FTP (Windows Vista version) Ant version is 1.8.2; I use commons-net-2.2 and jakarta-oro-2.0.8 (could not find newer version) My ant task looks like this <!-- Deploy new and changed files --> <target name="deploy" depends="package" description="Deploy new and changed files"> <ftp server="localhost" userid="" password="" action="send" depends="yes" passive="true" systemTypeKey="WINDOWS" serverTimeZoneConfig="Europe/Sofia" defaultDateFormatConfig="MMM dd yyyy" recentDateFormatConfig="MMM dd HH:mm" binary="true" retriesAllowed="3" verbose="true"> <fileset dir="${webapp.artefacts.path}"/> </ftp> </target> I read an article here: Ant:The definitive guide that says I need a version of jakarta oro AFTER 2.0.8 to talk to MS FTP servers, but I was not able to find such version. Jakarta oro site - http://jakarta.apache.org/oro/ says the oro project is retired as of 2010, but their latest distribution is from 2003! Please, can anyone help me with this? Any solution or any alternatives to the Ant ftp task? Thanks!

  Read the article

• Host ::1 resolves to remote IP

  - by thebuckst0p

  /etc/hosts files usually have this line, ::1 localhost. I thought ::1 was the equivalent of 127.0.0.1/localhost, and from my reading it seems to be the IPv6 version. So I was using it in Apache for firewalling, "Allow from ::1" and it only allowed local. Then suddenly that stopped working, so I pinged ::1 and got a remote IP address. I tracerouted it and it went through my ISP, through some Microsoft server, then another half dozen steps of asterisks... I'm not sure why this would be (the remote IP), but it doesn't seem good. I grep'd my hard drive for the remote IP and it doesn't appear anywhere. Is this some indicator that I'm being hacked, or normal behavior? Maybe my IPv6 settings are wrong? (This is a brand new MacBookPro with Snow Leopard.) Any ideas about this would be great - what is ::1 supposed to be, why would it be remote, should I be worried, how do I get it back to localhost? Thank you!

  Read the article

• Rails 3: Link_to :remote => true with JQuery?

  - by Derek

  Question update: I have figured out that importing JQuery (even without using it at all) is causing :remote => true to not work properly. I get the following error in the Chrome console: Uncaught TypeError: Object [object Object] has no method 'dispatchEvent' (prototype.js:5653) And when the link is clicked, it throws the same error again before redirecting. Responder.erb.html <ul> <% @choices.each_with_index do |choice, index| %> <li><%= link_to choice, { :action => "submit_response", :id => @id, :response => index }, :remote => true %></li> <% end %> </ul> Example generated HTML: <ul> <li><a href="/poller/submit_response/yni?response=0" data-remote="true">True</a></li> <li><a href="/poller/submit_response/yni?response=1" data-remote="true">False</a></li> </ul>

  Read the article

• php/dos : How do you parse a regedit export file?

  - by phill

  My objective is to look for Company key-value in the registry hive and then pull the corresponding Guid and other keys and values following it. So I figured i would run the regedit export command and then parse the file with php for the keys I need. So after running the dos batch command >regedit /E "output.txt" "HKLM\System....\Company1" The output textfile seems to be in some kind of UNICODE format which isn't regex friendly. I'm using php to parse the file and pull the keys. Here is the php code i'm using to parse the file <?php $regfile = "output.txt"; $handle = fopen ("c:\\\\" . $regfile,"r"); //echo "handle: " . $file . "<br>"; $row = 1; while ((($data = fgets($handle, 1024)) !== FALSE) ) { $num = count($data); echo "$num fields in line $row: \n"; $reg_section = $data; //$reg_section = "[HKEY_LOCAL_MACHINE\SOFTWARE\TECHNOLOGIES\MEDIUS\CONFIG MANAGER\SYSTEM\COMPANIES\RECORD11]"; $pattern = "/^(\[HKEY_LOCAL_MACHINE\\\SOFTWARE\\\TECHNOLOGIES\\\MEDIUS\\\CONFIG MANAGER\\\SYSTEM\\\COMPANIES\\\RECORD(\d+)\])$/"; if ( preg_match($pattern, $reg_section )) { echo "<font color=red>Found</font><br>"; } else { echo "not found<br>"; echo $data . "<br>"; } $row++; } //end while fclose($handle); ?> and the output looks like this.... 1 fields in line 1: not found ÿþW?i?n?d?o?w?s? ?R?e?g?i?s?t?r?y? ?E?d?i?t?o?r? ?V?e?r?s?i?o?n? ?5?.?0?0? ? 1 fields in line 2: not found 1 fields in line 3: not found [?H?K?E?Y??L?O?C?A?L??M?A?C?H?I?N?E?\?S?O?F?T?W?A?R?E?\?I?N?T?E?R?S?T?A?R? ?T?E?C?H?N?O?L?O?G?I?E?S?\?X?M?E?D?I?U?S?\?C?O?N?F?I?G? ?M?A?N?A?G?E?R?\?S?Y?S?T?E?M?\?C?O?M?P?A?N?I?E?S?]? ? 1 fields in line 4: not found "?N?e?x?t? ?R?e?c?o?r?d? ?I?D?"?=?"?4?1?"? ? 1 fields in line 5: not found Any ideas how to approach this? thanks in advance

  Read the article

• MMC and Server Manager Authentication Errors - Access Denied

  - by Vazgen

  I'm trying to connect remotely from my Windows 8 client to manage my Hyper-V Server 2012. I have done everything I can find to configure remote management of the server including: Added a net user on server Enabled anonymous dcom access on server and client Added firewall rules for "Windows Firewall Remote Management" and "Windows Management Instrumentation (WMI)" on server Added firewall exception on server for client IP Added cmdkey on client Added server to TrustedHost list on client Added LocalAccountTokenFilter policy registry entry on server Added client IP to server's host file Added server IP to client's host file I cannot believe I am still getting these errors. What's even more strange is that I can connect in Hyper-V Manager and create VM's but not in MMC and Server Manager. I also get Access Denied trying to Open the Authorization Store on my server from my client using Authorization Manager. I'm providing all the errors because I have a feeling they root from the same problem. Does anybody see anything I missed?

  Read the article

• ssh tunnel error "ssh_exchange_identification: Connection closed by remote host"

  - by Jacob Ewing

  I'm trying to use an ssh tunnel from my office machine to my home machine, and get an error when I try to use it. What I'm doing is starting one shell like so: ssh -gL 12345:my.home.domain:22 my.home.domain This is giving me a proper shell, no problem. What I normally do then is ssh to my home machine through this office machine, like so: ssh -p 12345 127.0.0.1 This has always worked for me, until last week, when I set up a new system on my home machine (switching from Ubuntu to Debian). Now I get an error. I can still open up my initial ssh connection, but when I try to use that tunnel, I get (on the office machine) this error: ssh_exchange_identification: Connection closed by remote host Also, when that happens, the open shell that I have the tunnelling set up through gets this line spat out at it: channel 3: open failed: connect failed: Connection timed out At which point, I'm at a loss. If any more info is needed, I'll be happy to post it. ============= further to that ============== After fiddling around further, I've found that I'm getting a different response from the server (my home machine that is) when I try to telnet in on the various ports. If I try: telnet my.home.domain 22 I get this back: Trying <my ip address>... Connected to <my domain>. Escape character is '^]'. SSH-2.0-OpenSSH_5.5p1 Debian-6+squeeze2 Which is what I would expect. After setting up the tunnel though, and then telnetting to that, I see this response: Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. ============== and further still ================== As per kbulgrien's suggestion, here is the output from the client machine with the -v option: ssh -vp 24600 127.0.0.1 OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to 127.0.0.1 [127.0.0.1] port 24600. debug1: Connection established. debug1: identity file /home/jacob/.ssh/id_rsa type -1 debug1: identity file /home/jacob/.ssh/id_rsa-cert type -1 debug1: identity file /home/jacob/.ssh/id_dsa type -1 debug1: identity file /home/jacob/.ssh/id_dsa-cert type -1 debug1: identity file /home/jacob/.ssh/id_ecdsa type -1 debug1: identity file /home/jacob/.ssh/id_ecdsa-cert type -1 ssh_exchange_identification: Connection closed by remote host

  Read the article

• Apple Airport Extreme and PS3/PSP remote play

  - by user5699

  I have not been able to get remote play over internet working through my AEBS. I have fiddled around with countless settings and also tried to telnet into the router, to no avail. The setup works fine inside the netowrk (I can remotely turn on my PS3 wirelessly using my PSP). However, outside the home network I cannot get it to work. Any help would be most appreciated.

  Read the article

• Nagios Terminal Services check?

  - by jldugger

  Most of our servers are licensed for 2 concurrent remote desktop sessions. This is fine, so long as everyone does their administrative task and logs off, but some people accidentally close sessions (disconnect but remain logged in) instead. I know that you can force someone off with the right Admin tools, but it's a bit ugly and may hurt productivity or maybe even the server(?). I was thinking that a nightly Nagios check of remote sessions available nagging people would help enforce build discipline on the subject. Can anyone recommend a service check that can monitor terminal service availability?

  Read the article

• Setting WMI permissions remotely

  - by christianlinnell

  I've developed a tool that does a simple retrieval of registered services and installed applications from remote Windows Server 2003 servers via WMI. My problem is, the tool needs to be run on an ad hoc basis by a user who is not an administrator of those servers. I've created a domain user (which the tool will use to run the query) that I'd like to grant remote WMI permission on each server, but given there are about 200 servers, I can't do it manually. Is there a way to grant access to that domain user via WMI, or by distributing a registry change via SMS or Group Policy?

  Read the article

• Single Msi File - Many RemoteApps

  - by Mikeon

  How can I create a single .MSI installer file for many Remote Apps in Remote Desktop Services? Suppose I have 10 applications exposed via RDS. To make life easier I created MSI installer packages so users can "install" those apps. currently I have 10 different .msi files which forces users to install 10 times. Is it possible to make all/some apps into a single .msi file? (I don't control user machines so installing via GPO or other magic is out of question).

  Read the article

• How to remotely open gedit with SFTP URL in Gnome through SSH?

  - by Álvaro Justen

  My setup is weird and I can't change it now. I have two machines: local-machine: it's my desktop running Ubuntu with Gnome remote-machine: it's one virtual machine, also running Ubuntu but without X In both machines I have my private and public SSH keys. I need to run SSH from remote-machine to local-machine and run gedit (in local-machine, under the default $DISPLAY) but openning a file in remote-machine throught SFTP. Something like this: myuser@remote-machine:~$ ssh local-machine "DISPLAY=:0.0 gedit sftp://remote-machine/some/file" The command above doesn't work. gedit shows this message: Could not open the file sftp://remote-machine/some/file. gedit cannot handle sftp: locations. Note that: /some/file exists on remote-machine. I can SSH normally from remote-machine to local-machine using my SSH key without any problems! I can run the command DISPLAY=:0.0 gedit sftp://remote-machine/some/file in a terminal on local-machine and gedit opens the file on remote-machine without any problems - but the terminal in which I executed the command is running in DISPLAY :0 (really, it's gnome-terminal). I also tried -t option of SSH client (to force pseudo-tty allocation) but it didn't work. If I try to run DISPLAY=:0.0 gedit sftp://remote-machine/some/file in local-machine but under a tty (for example in tty1, by pressing <Ctrl>+<Alt>+<F1>) it doesn't not work - I get the same error when running from remote-machine. I found that if I pass the environment variable DBUS_SESSION_BUS_ADDRESS with a correct value, it works! So, if I do something like that: myuser@local-machine:~$ env | grep DBUS_SESSION_BUS_ADDRESS > env.txt myuser@local-machine:~$ scp env.txt remote-machine: and then: myuser@remote-machine:~$ ssh local-machine "DISPLAY=:0.0 $(cat env.txt) gedit sftp://remote-machine/some/file" it works! The problem is that I'm not on local-machine so I can't get the correct value for this env variable. Is there any other way to make this work?

  Read the article

• Hide usernames shown on Windows Server 2008 Remote Desktop login screen

  - by user38553

  When I remote desktop to my Windows Server 2008 (a hosted virtual server) I see a login screen showing an icon for each user in the system. I can click on a user then enter a password and login. This is a terrible security oversight in my opinion as it gives anyone that might want to compromise my server a full list of valid usernames. Is there a way to revert to the old style of login screen requiring both username and password? Thanks

  Read the article

• Remote access to server via service control panel for non-admin user in Windows 2008

  - by owenevans00

  I'm trying to configure my Windows 2008 servers so that my developers can view their status without needing to log on to the box or be an admin. Unfortunately, the permissions set in Windows 2008 for remote non-admin users don't include the ability to enumerate or otherwise query services. This causes anything that contacts the SCM on the far end to fail (Win32_Service, sc.exe, services.msc etc). How do I set up permissions so that they can at least list the services and see if they are running?

  Read the article

• Router behind router network setup

  - by optimus

  My relative has bought a router instead of a switch which causes remote-access control issues on his network. His existing network has a 1st router where all PCs are connected via LAN cables. The 2nd router connnects to the 1st router and the remaining PCs are connected to the 2nd router via LAN cables. Normally, I would perform remote-access to help him out with some task. Now it seems all services behind the 2nd router are unavailable to me. How can I resolve this issue?

  Read the article

• Can thunderbird with -no-remote launch firefox without it?

  - by Simon

  We have two thunderbird profiles, and we launch thunderbird using -no-remote as follows: thunderbird -no-remote -P Profile1 and thunderbird -no-remote -P Profile2 unfortunately, this means that if either of us click on a link in an email, and firefox is already running, we get a warning message telling us that firefox is already running, rather than having it open the link. Is it possible for thunderbird to use firefox's remote, even though it has been launched with -no-remote? (if it makes a difference, this is on Xubuntu Karmic)

  Read the article

• pop3 IIS 6 , allow remote connections

  - by Que

  I'm using a EC2 windows 2003 instance. I managed to install pop3 and i can connect to it locally (using outlook express with the remote desktop) and the server address is the machine name. I also added MX record on the DNS (mail.mydomain.com) but still i can't connect to the pop3 server remotely using either mail.mydomain.com or even the server IP.

  Read the article

• Redirecting a port to a remote server on windows

  - by Chris T

  I only have command line access to a server and I'm not allowed to disable the antivirus (which blocks netcat). What I would like to do is have a program that listens on port A and when a remote computer connects to it redirect all input/output of that socket to another server on a different port. Basically a small proxy. Is there anything that will let me do this from command line? If not I could try coding something simple that does this with C++

  Read the article

• RemoteApp Security Warning

  - by nairware

  I have a Windows 2012 Standard x64 RemoteApps RDWeb portal where I can launch apps. We have one remote app in particular which is RDP (mstsc.exe). Whenever a user launches it, they receive three different prompts--the second one is this alert (shown below). How can I get rid of this alert? I have other RemoteApps launching as well, and they do not throw errors or alerts like this one. And they are applications with the .exe extension, so I do not understand what is so unique about the RDP RemoteApp that would cause this alert. One thing perhaps worth mentioning is this particular RDP remote app points directly to the mstsc.exe executable residing on a particular session host/terminal server (as shown in the "From" value of the warning). As such, a gateway server would not be used to load-balance and choose the RDP client launched from a session host at random. This RDP RemoteApp is explicitly associated with one particular terminal server.

  Read the article

• lftp: how to copy file on remote server

  - by takeshin

  How to copy file on remote server using lftp? Moving files is as easy as using mv command, but is there any command equivalent to cp?

  Read the article

• Execute a remote command on a Mac from Windows

  - by ripper234

  What's the easiest way to execute a single command on a Mac from a remote Windows machine, via batch? I'd like minimal pre-configuration (like SSH credentials) to exist on either machines, as I need to apply this on several Win/Mac pairs. The macs all have a common user/password (in fact, they are on the same domain), and I want to automate this as painlessly as possible.

  Read the article

• Command window missing default 8x12 font

  - by Robert Koritnik

  Installation: Windows Server 2008 R2 Remote Desktop Service role When I logon locally my command window (cmd.exe) displays with default font that is 8x12. But when I logon remotely and open command window, it opens with the smallest possible font selection. Opening window properties and setting font size, the default 8x12 font is missing from the list. What should I do to get this font back in the list? Following screenshots show settings when logged on locally and remotely. Local machine is not Aero capable, but remotely I can have Aero environment. I've also tried setting it to basic, but there was no change. Local logon Remote logon

  Read the article

• Access to Windows 7 log from a remote machine

  - by robob

  I'm trying to access with EventViewer (from a Windows XP Prof) to a remote machine with Windows 7 (Seven). Before I started the Service "RemoteRegistry" I received an "Access Denied". After started the service I can connet to the machine Log (in EventViewer app) but when i clik on any log as "Application" or "Security" I receive a "privilege" error. Could someone help me, please?

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >