Search Results

Search found 2280 results on 92 pages for 'ressource pool'.

Page 72/92 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Windows 2008 R2 DHCP Overlapping Scopes

  - by Buska

  We are trying to troubleshoot a scope overlap problem. We have multiple device types we wish to give all different ranges of a 16 bit subnet. IE. X device we wish to give 192.168.2.1-192.168.2.254/16, Y devices we wish to give 192.168.3.1-192.168.3.254/16. We are trying to accomplish this by creating different scopes and using the 60 class identifier. The problem is DHCP won't allow us to give these scopes with 16 bit masks because of the potential overlap. We aren't overlapping the address pool so why does DHCP care and can we work around this? If this isn't possible, how can i assign specific ranges by device type without creating multiple scopes? Any thoughts would be helpful. UPDATE: Entire Scope is 192.168.0.0/16 Gateway is 192.168.1.1/16 Device Hardware A - 192.168.20.1-192.168.20.254/16 Device Hardware B - 192.168.26.1-192.168.26.254/16 Device Hardware C - 192.168.85.1-192.168.85.254/16 We tried to setup multiple scopes for each device type (A,B,C) but couldn't specify a 16 bit mask as Scope A could technically overlap Scope B even thought our start and end addresses don't. I hope this makes more sense. Thanks for your thoughts.

  Read the article

• windows 2008 r2 iis worker proccess memory usage increase

  - by nLL

  I have this web site written in c#. around 400-500 users online at any time. it was on windows 2008 32 bit machine before and never ever locked/slowed down due to increased memory consumption up until i upgraded it's server to win 2008 r2 64 bit. Old server had only 4 gig ram and quad core cpu at 2ghz. site was working just fine. since i've upgraded the server i noticed (2 times with in 10 days) it started to eat ram. last night it went up to 4 gb ram. with ram increase response slows down quite a lot. recycling app pool doesn't help. I have to restart it's worker process to recover. i've noticed this usually happens if there are continuous errors. as i didn't change anything in the code am i safe to assume it is not related to memory leak in the code? did anyone came across something like that? same thing happens if i create continuous errors with classic asp. thanks

  Read the article

• MysqlTunner and query_cache_size dilemma

  - by wbad

  On a busy mysql server MySQLTuner 1.2.0 always recommends to add query_cache_size no matter how I increase the value (I tried up to 512MB). On the other hand it warns that : Increasing the query_cache size over 128M may reduce performance Here are the last results: >> MySQLTuner 1.2.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.5.25-1~dotdeb.0-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 6G (Tables: 195) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [!!] Total fragmented tables: 51 -------- Security Recommendations ------------------------------------------- [OK] All database users have passwords assigned -------- Performance Metrics ------------------------------------------------- [--] Up for: 1d 19h 17m 8s (254M q [1K qps], 5M conn, TX: 139B, RX: 32B) [--] Reads / Writes: 89% / 11% [--] Total buffers: 24.2G global + 92.2M per thread (1200 max threads) [!!] Maximum possible memory usage: 132.2G (139% of installed RAM) [OK] Slow queries: 0% (2K/254M) [OK] Highest usage of available connections: 32% (391/1200) [OK] Key buffer size / total MyISAM indexes: 128.0M/92.0K [OK] Key buffer hit rate: 100.0% (8B cached / 0 reads) [OK] Query cache efficiency: 79.9% (181M cached / 226M selects) [!!] Query cache prunes per day: 1033203 [OK] Sorts requiring temporary tables: 0% (341 temp sorts / 4M sorts) [OK] Temporary tables created on disk: 14% (760K on disk / 5M total) [OK] Thread cache hit rate: 99% (676 created / 5M connections) [OK] Table cache hit rate: 22% (1K open / 8K opened) [OK] Open file limit used: 0% (49/13K) [OK] Table locks acquired immediately: 99% (64M immediate / 64M locks) [OK] InnoDB data size / buffer pool: 6.1G/19.5G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance Reduce your overall MySQL memory footprint for system stability Increasing the query_cache size over 128M may reduce performance Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 192M) [see warning above] The server has 76GB ram and dual E5-2650. The load is usually below 2. I appreciate your hints to interpret the recommendation and optimize the database configs.

  Read the article

• Separate Certificate by Subdomain (With multiple IPs)

  - by Brian

  Note: Yes, I realize this problem is easier to solve by just using 1 multi-domain or wildcard certificate. I wish to have an ASP.NET site running on IIS with 2 SSL domains sharing 1 web application but using separate certificates. Assuming I have 2 certificates, this can be solved on IIS7 as follows: Web Application1: Binding 1: http, 80, IP Address *, Host Name * Binding 2: https, 443, IPADDRESS1, using CERTDOMAIN1 (DOMAIN1 resolves to IPADDRESS1) Binding 3: https, 443, IPADDRESS2, using CERTDOMAIN2 (DOMAIN2 resolves to IPADDRESS2) That is to say, 2 certificates and 2 ip addresses, but both mapped to the same web application. In IIS6, the closest I have been able to come to this configuration is: Web Application1: Binding 1: http, 80, IPADDRESS1 Binding 2: https, 443, IPADDRESS1, using CERTDOMAIN1 (DOMAIN1 resolves to IPADDRESS1) Web Application2: Binding 1: http, 80, IPADDRESS2 Binding 2: https, 443, IPADDRESS2, using CERTDOMAIN2 (DOMAIN2 resolves to IPADDRESS2) That is to say, 2 certificates and 2 IP addresses, 2 web applications, both mapped to the same file location. The IIS6 solution is not optimal. Even if sharing an application pool, there are still costs associated with running the same site as two applications. Is upgrading from IIS6 to IIS7 a legitimate way to resolve this problem? Is there an IIS6 way to map 2 IP addresses within the same web application to different certificates?

  Read the article

• Windows Server 2008 IIS7 - page requests randomly hang or timeout

  - by seb835

  I've just installed a fresh copy of Windows Server 2008 x64 with IIS7 and PHP (fast CGI). However, I'm noticing that after moving my web site from a similarly specified machine to this one, I'm getting issues. The issue seems to be that randomly, as I'm clicking through the web pages being served, the browser will suddenly hang saying "waiting for mysite.com...". Sometimes the page will then timeout, or finally resolve after 20 to 30 seconds, but maybe missing the CSS style sheet. Very strange, as this is the only website installed on this new server, and only myself using/testing it. Server is installed in the same data centre below the old server. Has anyone else had a similar problem? I tried increasing the max workers pool to 10 (from 1), but this has no effect. Seems to happen most frequently after 1 or 2 minutes of inactivity on the website, then trying to load/refresh a web page. Many thank for any info and help. Kind Regards, Seb

  Read the article

• PHP unable to allocate memory.

  - by AlReece45

  On my way to the office this morning, every website on our shared VPS started giving the same error (several times, not the typical memory_limit error which is fatal): Warning: Unknown: Unable to allocate memory for pool. in Unknown on line 0 The shared server is a 64-bit OpenVZ container running cPanel. There are only ~6 VPSes on the host-- this is the largest one at only 4GB. The host itself has 24GB RAM. As the below graphs show, the memory usage on the host and VPS are both rather low. CPU Usage/Disk/Host all seem to be normal. RlimitMem was set to 583653034, yet the memory usage is about the same as it usually is. Apache 2.2, PHP 5.2 (mod_php) Restarting Apache has corrected the problem for now. However, I'd like to prevent it from happening again and I'm not sure what was limiting the memory. RlimitMem was set to 583653034, yet the memory usage is about the same as it usually is. There's seems to be plenty of memory: what caused this error? VPS Memory Usage Host Memory Usage APC Information apc.ttl=0 apc.shm_size=0 apc.mmap_file_mask=(blank) 1 Segment(s) with 32.0 MBytes (mmap memory, pthread mutex locking)

  Read the article

• Is Ubuntu a bad distro for a standalone mysql database server?

  - by DhruvPathak

  I read an article here : http://www.mysqlperformanceblog.com/2011/12/08/which-linux-distribution-for-mysql-server/ On the other end there are Debian and Ubuntu. Both use tool called dpkg for package management. There isn’t a month that I log in to a system based on either distribution where there are no issues with packages consistency. Unfinished installations, unresolved conflicts are so common that it’s just beyond simple negligence. The packaging system is just not robust enough. Another problem is that one broken package may block you from installing or uninstalling anything else. Imagine that someone left system in such shape, you prepared for downtime, stopped MySQL and… error – text editor has not been properly installed, so you cannot upgrade MySQL either until the problem is fixed. In a stressful situation when downtime clock ticks – annoying at best We prefer Ubuntu server because of familiarity and Ubuntu also being development environment. Questions: Is Ubuntu used commonly in production for a mysql database server ? Is it worth the trouble ever to have one distro eg Ubuntu in web server, and another say Red Hat in database server ? Or Is a homogenous server pool a better choice ?

  Read the article

• OpenVPN - Cannot browse ipv4 websites

  - by user1494428

  I have set up an openVPN tunnel on my VPS (OpenVZ - Ubuntu 12.04). The problem is I can only browse websites which support ipv6 like google. http://whatismyv6.com/ reports me that I've an ipv6 adress, so I guess this is the problem. Server configuration: dev tun server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key dh /etc/openvpn/easy-rsa/keys/dh1024.pem push "route 10.8.0.0 255.255.255.0" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" push "redirect-gateway def1" comp-lzo persist-tun persist-key status openvpn-status.log log /var/log/openvpn.log verb 3 Client configuration: client remote xx.xx.xx.xx 1194 dev tun comp-lzo ca ca.crt cert client1.crt key client1.key redirect-gateway def1 verb 3 I have configured NAT with this command: iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to xx.xx.xx.xx Can someone explain me how I can make it works (forcing ipv4?) I had the same problem with another vps and I also tried on another client (All Windows 7).

  Read the article

• glassfish timeout

  - by Stefano

  Environment: Windows 2008 Server Edition Netbeans 6.7.1 Glassfish 2.1 Apache 2.2.15 for win32 Original problem (almost fixed): The HTTP/1.1 GET method to send data fails if I wait for more than 30 seconds. What I did: I added to the http.conf file of Apache these lines: # # Timeout: The number of seconds before receives and sends time out. # Timeout 9000 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On I went to the Glassfish panel (localhost:4848) and in Configuration HTTP services and I put: Timeout request: 9000 seconds (it was 30) Standby time: -1 (it was 30 seconds) Problem: I am not able to put for glassfish a timeout bigger than 2 minutes to send a GET method. I found this article about glassfish settings, but i'm not able to find WHERE I should put those parameters, and if they could work. Can anybody help try to set this timeout to a higher limit? Maybe it's even a different setting? New tried solution: I went to the glassfish panel control, and to Configuration Subprocesses "Thread-pool-name" and changed the idle timeout from 120 seconds to 1200 seconds. Then I restarted the glassfish service (both from the administrative tools and from asadmin), but still it waits 120 seconds to go idle. I even tried restarting the whole server, still no results. Maybe some setting in postgres? Or the connection of netbeans to postgres through glassfish?

  Read the article

• Cannot browse ipv4 websites (OpenVPN )

  - by user1494428

  I have set up an openVPN tunnel on my VPS (OpenVZ - Ubuntu 12.04). The problem is when I'm connected to the vpn, I can only browse websites which support ipv6 like google. Ipv4 sites aren't loading (no error, just waiting indefinitely). http://whatismyv6.com/ reports me that I've an ipv6 address, so I guess this is the problem. Server configuration: dev tun server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key dh /etc/openvpn/easy-rsa/keys/dh1024.pem push "route 10.8.0.0 255.255.255.0" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" push "redirect-gateway def1" comp-lzo persist-tun persist-key status openvpn-status.log log /var/log/openvpn.log verb 3 Client configuration: client remote xx.xx.xx.xx 1194 dev tun comp-lzo ca ca.crt cert client1.crt key client1.key redirect-gateway def1 verb 3 I have configured NAT with this command: iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to xx.xx.xx.xx Can someone explain me how I can make it works (forcing ipv4?) I had the same problem with another vps and I also tried on another client (All Windows 7).

  Read the article

• Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

  - by clem

  Hi - Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message : "Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions? Many thanks Clem

  Read the article

• ASA 5505 VPN setup. VPN works but still unable to reach devices in the inside network.

  - by chickenloop

  I've setup a Remote Access VPN on my Cisco ASA 5505. I'm able to connect to my ASA via my phone or the Cisco client, but I'm unable to reach devices in my inside LAN when connected via VPN. The setup is the following: Inside Network : 10.0.0.0/24 VPN_POOL: 172.16.0.0/24 Outside Network: 192.168.1.0/24 ASA is not the perimeter router, there is another device on the 192.168.1.0/24 network which is connected to my cable provider. Obviously UDP port 500 and 4500 are forwarded to the ASA's outside interface. Everything works perfectly, besides the VPN stuff. Config: interface Vlan1 nameif inside security-level 100 ip address 10.0.0.254 255.255.255.0 interface Vlan2 description Outside Interface nameif outside security-level 0 address 192.168.1.254 255.255.255.0 object network VPNPOOL subnet 172.16.0.0 255.255.255.0 object network INSIDE_LAN subnet 10.0.0.0 255.255.255.0 Then the exempt NAT rule. nat (inside,outside) source static INSIDE_LAN INSIDE_LAN destination static VPNPOOL VPNPOOL I don't think that the problem is with the VPN config, as I can successfully establish the VPN connection, but just in case I post it here: group-policy ZSOCA_ASA internal group-policy ZSOCA_ASA attributes vpn-tunnel-protocol ikev1 split-tunnel-policy tunnelspecified split-tunnel-network-list value Split-Tunnel default-domain value default.domain.invalid tunnel-group ZSOCA_ASA type remote-access tunnel-group ZSOCA_ASA general-attributes address-pool VPNPOOL default-group-policy ZSOCA_ASA tunnel-group ZSOCA_ASA ipsec-attributes ikev1 pre-shared-key ***** Any ideas are welcome. Regards.

  Read the article

• vSphere education - What are the downsides of configuring virtual machines with *too* much RAM?

  - by ewwhite

  VMware memory management seems to be a tricky balancing act. With cluster RAM, Resource Pools, VMware's management techniques (TPS, ballooning, host swapping), in-guest RAM utilization, swapping, reservations, shares and limits, there are a lot of variables. I'm in a situation where clients are using dedicated vSphere cluster resources. However, they are configuring the virtual machines as though they were on physical hardware. In turn, this means a standard VM build may have 4 vCPUs and 16GB or more of RAM. I come from the school of starting small (1 vCPU, minimal RAM), checking real-world use and adjusting up as necessary. Some examples from a "problem" cluster. Resource pool summary - Looks almost 4:1 overcommitted. Note the high amount of ballooned RAM. Resource allocation - The Worst Case Allocation column shows that these VMs would have access to less than 50% of their configured RAM under constrained conditions. The real-time memory utilization graph of the top VM in the listing above. 4 vCPU and 64GB RAM allocated. It averages under 9GB use. Summary of the same VM What are the downsides of overcommitting and overconfiguring resources (specifically RAM) in vSphere environments? Assuming that the VMs can run in less RAM, is it fair to say that there's overhead to configuring virtual machines with more RAM than they need? What is the counter-argument to: "if a VM has 16GB of RAM allocated, but only uses 4GB, what's the problem??"? E.g. do customers need to be educated? What specific metric should be used to meter RAM usage. Tracking the peaks of "Active" versus time?

  Read the article

• IIS Web Farm Framework servers are automatically set to "unavailable" even when they are healthy... And they never return to the available state!

  - by JohannesH

  I have 2 web farm configurations, one with 2 member servers and one with 3 member servers. I have health monitoring set up on both farms and the monitoring tool reports all servers as being healthy. However after a while all the servers are marked as being "Unavailable" and "Healthy" in the "Monitoring and Management" screen (in the "Servers" screen they are all listed with "Yes" in the "Ready for Load Balancing" column). Viewing the event log on both the web farm controller or any of farm servers doesn't reveal anything interesting. there are no warnings or errors in the period where the servers became unavailable. There are a couple of informational events about the worker process getting shut down due to inactivity but I don't hope this is the cause since that would mean that the farms will die during the night when the load is low. Am I missing something? EDIT: Btw, I think its very odd that the application pool shuts down on the servers since the health monitoring system is polling an aspx page on each server. Shouldn't that keep them going? EDIT2: Now I've also experienced this problem with the RTW version of Web Farm Framework 2.

  Read the article

• Cisco 7206vxr cpu reducing

  - by naimson

  I have a 7206VXR (NPE-G2) . At the rate of 140 kpps i gain 80% of cpu . So i looking for ways how to reduce it? So i want to turn off netflow(but don't want to this,monitoring is highly important for me), but it will give me only 10-20% ? At this moment with 84kpps i have 58% sh processes cpu sorted give me this. PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 109 163534600 537236763 304 35.38% 32.83% 16.85% 0 IP Input 67 829396 52280 15864 0.15% 0.01% 0.00% 0 Per-minute Jobs 68 5542736 3053476 1815 0.15% 0.18% 0.16% 0 Per-Second Jobs 51 635852 1116315 569 0.07% 0.03% 0.02% 0 Net Background 329 120396 4607274 26 0.07% 0.00% 0.00% 0 EIGRP-IPv4 Hello 105 50508 95032488 0 0.07% 0.05% 0.05% 0 IPAM Manager 6 4068580 476916 8531 0.00% 0.07% 0.05% 0 Check heaps 7 7768 3634 2137 0.00% 0.00% 0.00% 0 Pool Manager 8 0 1 0 0.00% 0.00% 0.00% 0 DiscardQ Backgro 10 8 708 11 0.00% 0.00% 0.00% 0 WATCH_AFS 5 0 1 0 0.00% 0.00% 0.00% 0 RO Notify Timers 12 0 2 0 0.00% 0.00% 0.00% 0 ATM VC Auto Crea 9 0 2 0 0.00% 0.00% 0.00% 0 Timers 11 0 2 0 0.00% 0.00% 0.00% 0 ATM AutoVC Perio 13 296 610532 0 0.00% 0.00% 0.00% 0 IPC Event Notifi 16 0 1 0 0.00% 0.00% 0.00% 0 IPC Zone Manager 17 3584 2980311 1 0.00% 0.00% 0.00% 0 IPC Periodic Tim 4 0 1 0 0.00% 0.00% 0.00% 0 EDDRI_MAIN 19 0 1 0 0.00% 0.00% 0.00% 0 IPC Process leve 20 0 1 0 0.00% 0.00% 0.00% 0 IPC Seat Manager 21 96 174453 0 0.00% 0.00% 0.00% 0 IPC Check Queue 14 4 50890 0 0.00% 0.00% 0.00% 0 IPC Dynamic Cach 3 0 1 0 0.00% 0.00% 0.00% 0 cpf_process_tpQ 24 756 305371 2 0.00% 0.00% 0.00% 0 IPC Keep Alive M 25 2340 610561 3 0.00% 0.00% 0.00% 0 IPC Loadometer 22 0 1 0 0.00% 0.00% 0.00% 0 IPC Seat RX Cont 15 0 1 0 0.00% 0.00% 0.00% 0 IPC Session Serv 18 1620 2980310 0 0.00% 0.00% 0.00% 0 IPC Deferred Por 29 0 1 0 0.00% 0.00% 0.00% 0 Exception contro sh run(greped): http://pastie.org/5483194 Hardware: c7200p-adventerprisek9-mz.151-4.M1.bin Cisco 7206VXR (NPE-G2) processor (revision A) with 917504K/65536K bytes of memory. Processor board ID 2xxxxxxx MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2 6 slot VXR midplane, Version 2.1

  Read the article

• Cisco ASA 5505 network route for static IP hosts

  - by TheCapn

  I've configured my internal VLAN using the most basic settings where ports 1-7 are assigned from a pool of addresses in the range 192.168.15.5 - 192.168.15.36. These hosts are given access to the internet and it works great. What I'm trying to set up now is allowing users who are connected to the device and specify their IP (say I connect and request 192.168.15.45) are given internet access and can still work alongside DHCP hosts. Those with a DHCP assigned address are blocked from the internet. Mostly the issue resides in that I am very new to working with the device. I feel that the solution is easy but I'm not looking in the right spots and don't have the correct terminology down to google it. Do I need to define access control lists? Group policies? a new VLAN? The rules that are set up seem to be specific to the entire /24 subnet but when I request a static IP outside of the DHCP range I get blocked from other hosts and the internet.

  Read the article

• Reverse NAT Setup for Hyper-V on Win 2008 R2

  - by sukru

  I'm trying to setup a Linux server behind a Windows Hyper-V host that will help supply some of the services (SSH, HTTPS, etc). However getting RRAS configured for reverse NAT (port forwarding) turned out to be a non trivial task. As a staring point, I tried forwarding port 22 (SSH) to the virtual machine. The virtual machine is on a public interface (i.e.: it also has a visible IP on the same network as the host). On RRAS management console I tried to add a rule, by adding "Local Area Connection" to NAT pool (Public Interface - Enable Nat), and an incoming rule for port 22 - :22. I also tried with the same port enabled on Windows Firewall (and not). The NAT management page tells there are "1 mappings" and "30+ Outbound packets transleted". However all other counters (Inbound packets translated, and respective rejected ones) are always zero. (I'm trying to access the server from an external machine). I can directly access the service if I give the VM's public IP, but not the host's one. Is there a way to enable this on RRAS?

  Read the article

• Static DHCP binding

  - by Alex

  Good time of day, SF people. I have created a manual DHCP binding entry on a Cisco router so that a client would always get leased to it. The clients wants to get the same address on both of his dual-boot linux systems. He tries to get an IP address leased and he succeeds on one of the dual-boot operating systems. When he reboots to another one he gets a lease for a completely different one. I don't get it. The MAC addresses are the same (we checked in ifconfig, so what could be happening here? Why is the router confused? Or is it something else? Also, how can I check DHCP server IP address who I have got an IP address from (on Linux)? Configuration on Cisco: ip dhcp pool MANUAL_BINDING0001 host 192.168.0.64 255.255.255.0 hardware-address dead.beef.1337 dns-server 192.168.8.11 default-router 192.168.0.254 domain-name verynicedomainigothere.cn PS. Is it mandatory to use client-name configuration line?

  Read the article

• ZFS & Deduplicating FLAC Data

  - by jasongullickson

  I'm experimenting with using ZFS to deduplicate a large library of FLAC files. The purpose of this is twofold: Reduce storage utilization Reduce bandwidth needed to sync the library with cloud storage Many of these files are of the same music tracks but from different physical media. This means that for the most part they are the same and usually close to the same size, which makes me think that they should benefit from block-level deduplication. However in my testing I'm not seeing good results. When I create a pool and add three of these tracks (identical songs from different source media) zpool list reports 1.00 dedupe. If I copy all of the files (make exact duplicates of the three) dedupe climbs, so I know that it is enabled and functioning, but it's not finding any duplication in the original collection of files. My first thought was that perhaps some of the variable header data (metadata tags, etc.) might be mis-aligning the bulk of the data in these files (the audio frames) but even making the header data consistent across the three files doesn't seem to have any impact on deduplication. I'm considering taking alternate routes (testing other dedupe filesystems as well as some custom code) but since we're already using ZFS and I like the ZFS replication options, I'd prefer to use ZFS dedupe for this project; but perhaps it's simply not capable of working well with this sort of data. Any feedback regarding tuning that might improve dedupe performance for this sort of dataset, or confirmation that ZFS dedupe is not the right tool for this job are appreciated.

  Read the article

• Sharepoint web part fails intermittently

  - by pringly

  I have a MOSS 2007 environment, 2 web servers and a DB server, load balanced between the two web servers. I deployed a web part recently, which worked fine for a while, but failed on web server 2 after a day. When it fails, it gets the error message: 'A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe’ Once it has failed, it will stay that way until an IIS reset is done. The other web server never fails, I tried to force the second web server to fail to recreate the issue and have been unable to do it. I tried placing it under heavy http traffic and it handled it fine. Put it back in the pool and it failed again after about 7 hours. So, if i remove the .dll for the webpart from the affected web server, the webpart doesnt stop working. Is this normal behavior? I checked the bin directory for the site and the global assembly and it there is no other copy of the .dll anywhere else on the server. Also, when checking the web part gallery, if the web part has failed it will appear in the gallery, but by trying to add a new webpart, the .dll wont be listed. I have no idea how to continue troubleshooting from here or even fix it, any ideas?

  Read the article

• IIS Web Farm Framework servers are automatically set to "unavailable" even when they are healthy... And they never return to the available state!

  - by JohannesH

  I have 2 web farm configurations, one with 2 member servers and one with 3 member servers. I have health monitoring set up on both farms and the monitoring tool reports all servers as being healthy. However after a while all the servers are marked as being "Unavailable" and "Healthy" in the "Monitoring and Management" screen (in the "Servers" screen they are all listed with "Yes" in the "Ready for Load Balancing" column). Viewing the event log on both the web farm controller or any of farm servers doesn't reveal anything interesting. there are no warnings or errors in the period where the servers became unavailable. There are a couple of informational events about the worker process getting shut down due to inactivity but I don't hope this is the cause since that would mean that the farms will die during the night when the load is low. Am I missing something? EDIT: Btw, I think its very odd that the application pool shuts down on the servers since the health monitoring system is polling an aspx page on each server. Shouldn't that keep them going? EDIT2: Now I've also experienced this problem with the RTW version of Web Farm Framework 2.

  Read the article

• Problem running MVC3 app in IIS 7

  - by mjmoore99

  I am having a problem getting a MVC 3 project running in IIS7 on a computer running Windows 7 Home-64 bit. Here is what I did. Installed IIS 7. Accessed the server and got the IIS welcome page. Created a directory named d:\MySite and copied the MVC application to it. (The MVC app is just the standard app that is created when you create a new MVC3 project in visual studio. It just displays a home page and an account logon page. It runs fine inside the Visual Studio development server and I also copied it out to my hosting site and it works fine there) Started IIS management console. Stopped the default site. Added a new site named "MySite" with a physical directory of "d:\Mysite" Changed the application pool named MySite to use .Net Framework 4.0, Integrated pipeline When I access the site in the browser I get a list of the files in the d:\MySite directory. It is as if IIS is not recognizing the contents of d:\MySite as an MVC application. What do I need to do to resolve this?

  Read the article

• WebSphere hung threads, how can I track then down?

  - by Puzzled

  We have an application running on WebSphere (unfortunately it is 6.1 which is no longer supported, it has not yet been migrated in production to a later version) which becomes entirely unresponsive because of hung threads. As far as I can tell we entirely exhaust one of the thread pools. I have activated hung thread detection and I get a core/thread dump when hung threads are detected. The server can run for several days without problems but has crashed twice this week. When load the core/thread dump in "IBM Thread and Monitor Dump Analyzer for Java", it tells me that there are a certain number of hung threads (this time it was 2, last time 11) and multiple (usually around 40) threads "waiting on condition" and some running threads. I believe one of the thread pool has around that size (50). Now what I see in there are threads waiting for locks, having locks or in wait. Most of them show a stack track which always ends like this: at java/lang/Object.wait(Native Method) at java/lang/Object.wait(Object.java:231) Now, how can I track this down to either a server configuration problem, application issue, WebSphere problem or something else? How is this supposed to help me track down the problem when almost everything in there refers to IBM code? I cannot ask IBM's help as 6.1 is now an unsupported version of WebSphere and while work has been done to make it work under WebSphere 7 we are not yet ready to switch to it in Production yet.

  Read the article

• Configure Web app for external access (IIS7), allowing only certain users via AD group. All users need internal access

  - by White Island

  We have a Web app running in IIS7 (Server 2008 R2). I now need to allow external access with an SSL certificate, so certain users (e.g. the owner of the company) can use it remotely without VPN. They want to roll out the external access only to those specific users at first (thinking: a Windows credential prompt), BUT everyone will still need access internally (HTTP), without the prompt. I have the SSL cert installed on the server and public DNS configured. I've been trying to figure out how to work the authentication/authorization. I was thinking I need to disable Anonymous authn and set Windows authn, then I keep coming back to 'URL Authorization' in my research for the group setting; however, when I tried URL authz, (removed allow all, added allow rule for the special group), it broke the site internally (403.2 Forbidden, I believe it was). I thought maybe setting up a second site in IIS pointing to the same program would work, but the exact same thing happened (and again with a new app pool, just for kicks). So I guess my question is, how would you do this: allow external access, limited to users in a specific AD group, while still allowing internal access without a credentials prompt? How do I separate the external HTTPS and internal HTTP authorization requirements? Will I need to just copy the entire contents of the app in Windows Explorer to a new folder and create my external site from that? Is Windows authentication the correct option for this? I did come across this, which refers to creating a custom module. While it sounds like a solution, it's not one I'm familiar with, and I just wondered if there is a simpler way to get it to work: http://forums.iis.net/p/1182792/2000775.aspx Thanks!

  Read the article

• Perfmon % Processor Time vs. task manager's CPU usage

  - by nat

  I'm new to using Perfmon and performance monitoring in general (so go easy on me please ;) I know that Perfmon doesn't have anything exactly like Task Manager's CPU usage display, but I'm trying to figure out how to monitor user's CPU usage via Perfmon in a similar way, and trying to understand the measurements (or how to convert the numbers to get a similar understanding) For example, if in Task Manager, a particular user is consistently using more than 5% CPU, I would want to contact the user about it. I learn best by example, so here is exactly what I'm trying to do, with a specific example: This is for a 32-bit Dual Quad Core Windows 2003 web server (8 CPUs), there are many web sites on the server, each running within their own application pool/worker process ID. Through other research here I learned of a registry change that I made so that the PID shows up with the w3wp process so I can easily identify the site later by cross-referencing it. I set up a counter with the following settings: Process -> % Processor Time -> all instances Here is an example. Say I'm interested in "black line" user in this graph below, as his process is spiking quite high compared to all the other users: (I wasn't allowed to post the image as I'm a new user on this site.. I've uploaded the image to:) http://i35.tinypic.com/106yn8k.jpg So... using this as an example, I see that they have an AVERAGE % PROCESSOR TIME of 23.264 , and have spiked as high as 103.124 So what exactly does this 23.264 number mean to me? Is it similar to an average of Task Manager's CPU reading for this user? Or, since this server has 8 CPUs, should I divide this number by 8? (23.264/8 = 2.9% AVERAGE CPU LOAD?) Thanks in advance.

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >