Search Results

Search found 2010 results on 81 pages for 'scan'.

Page 72/81 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Finding N contiguous zero bits in an integer to the left of the MSB position of another integer

  - by James Morris

  The problem is: given an integer val1 find the position of the highest bit set (Most Significant Bit) then, given a second integer val2 find a contiguous region of unset bits, with the minimum number of zero bits given by width to the left of the position (ie, in the higher bits). Here is the C code for my solution: typedef unsigned int t; unsigned const t_bits = sizeof(t) * CHAR_BIT; _Bool test_fit_within_left_of_msb( unsigned width, t val1, t val2, unsigned* offset_result) { unsigned offbit = 0; unsigned msb = 0; t mask; t b; while(val1 >>= 1) ++msb; while(offbit + width < t_bits - msb) { mask = (((t)1 << width) - 1) << (t_bits - width - offbit); b = val2 & mask; if (!b) { *offset_result = offbit; return true; } if (offbit++) /* this conditional bothers me! */ b <<= offbit - 1; while(b <<= 1) offbit++; } return false; } Aside from faster ways of finding the MSB of the first integer, the commented test for a zero offbit seems a bit extraneous, but necessary to skip the highest bit of type t if it is set. I have also implemented similar algorithms but working to the right of the MSB of the first number, so they don't require this seemingly extra condition. How can I get rid of this extra condition, or even, are there far more optimal solutions? Edit: Some background not strictly required. The offset result is a count of bits from the high bit, not from the low bit as maybe expected. This will be part of a wider algorithm which scans a 2D array for a 2D area of zero bits. Here, for testing, the algorithm has been simplified. val1 represents the first integer which does not have all bits set found in a row of the 2D array. From this the 2D version would scan down which is what val2 represents. Here's some output showing success and failure: t_bits:32 t_high: 10000000000000000000000000000000 ( 2147483648 ) --------- ----------------------------------- *** fit within left of msb test *** ----------------------------------- val1: 00000000000000000000000010000000 ( 128 ) val2: 01000001000100000000100100001001 ( 1091569929 ) msb: 7 offbit:0 + width: 8 = 8 mask: 11111111000000000000000000000000 ( 4278190080 ) b: 01000001000000000000000000000000 ( 1090519040 ) offbit:8 + width: 8 = 16 mask: 00000000111111110000000000000000 ( 16711680 ) b: 00000000000100000000000000000000 ( 1048576 ) offbit:12 + width: 8 = 20 mask: 00000000000011111111000000000000 ( 1044480 ) b: 00000000000000000000000000000000 ( 0 ) offbit:12 iters:10 ***** found room for width:8 at offset: 12 ***** ----------------------------------- *** fit within left of msb test *** ----------------------------------- val1: 00000000000000000000000001000000 ( 64 ) val2: 00010000000000001000010001000001 ( 268469313 ) msb: 6 offbit:0 + width: 13 = 13 mask: 11111111111110000000000000000000 ( 4294443008 ) b: 00010000000000000000000000000000 ( 268435456 ) offbit:4 + width: 13 = 17 mask: 00001111111111111000000000000000 ( 268402688 ) b: 00000000000000001000000000000000 ( 32768 ) ***** mask: 00001111111111111000000000000000 ( 268402688 ) offbit:17 iters:15 ***** no room found for width:13 ***** (iters is the count of iterations of the inner while loop)

  Read the article

• Null Exception RelativeLayout

  - by theblixguy

  I am trying to remove objects from my relative layout and replace the background with another image but I get a java.lang.NullPointerException on this line: RelativeLayout ths = (RelativeLayout)findViewById(R.layout.activity_main); Below is my code: package com.ssrij.qrmag; import android.app.Activity; import android.content.Intent; import android.net.Uri; import android.os.Bundle; import android.view.View; import android.view.animation.Animation; import android.view.animation.TranslateAnimation; import android.view.animation.Animation.AnimationListener; import android.widget.Button; import android.widget.RelativeLayout; import android.widget.TextView; public class MainActivity extends Activity { @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); // Initialize animations Animation a = new TranslateAnimation(1000,0,0,0); Animation a1 = new TranslateAnimation(1000,0,0,0); Animation a2 = new TranslateAnimation(1000,0,0,0); Animation a3 = new TranslateAnimation(1000,0,0,0); // Set animation durations (ms) a.setDuration(1200); a1.setDuration(1400); a2.setDuration(1600); a3.setDuration(1800); // Get a reference to the objects we want to apply the animation to final TextView v = (TextView)findViewById(R.id.textView1); final TextView v1 = (TextView)findViewById(R.id.textView2); final TextView v2 = (TextView)findViewById(R.id.TextView3); final Button v3 = (Button)findViewById(R.id.tap_scan); // Clear existing animations, just in case... v.clearAnimation(); v1.clearAnimation(); v2.clearAnimation(); v3.clearAnimation(); // Start animating v.startAnimation(a); v1.startAnimation(a1); v2.startAnimation(a2); v3.startAnimation(a3); a1.setAnimationListener(new AnimationListener() { @Override public void onAnimationStart(Animation animation) { // TODO Auto-generated method stub } @Override public void onAnimationRepeat(Animation animation) { // TODO Auto-generated method stub } @Override public void onAnimationEnd(Animation animation) { v.setVisibility(View.INVISIBLE); v1.setVisibility(View.INVISIBLE); v2.setVisibility(View.INVISIBLE); v3.setVisibility(View.INVISIBLE); RelativeLayout ths = (RelativeLayout)findViewById(R.layout.activity_main); ths.setBackgroundResource(R.drawable.blurbg); } }); } public void ScanQr(View v) { // Open the QR Scan page Intent a = new Intent(MainActivity.this, ScanActivity.class); startActivity(a); } } Is there anything that I am doing wrong?

  Read the article

• Large number of UPDATE queries slowing down page

  - by Bryan Lewis

  I am reading and validating large fixed-width text files (range from 10-50K lines) that are submitted via our ASP.net website (coded in VB.Net). I do an initial scan of the file to check for basic issues (line length, etc). Then I import each row into a MS SQL table. Each DB rows basically consists of a record_ID (Primary, auto-incrementing) and about 50 varchar fields. After the insert is done, I run a validation function on the file that checks each field in each row based on a bunch of criteria (trimmed length, isnumeric, range checks, etc). If it finds an error in any field, it inserts a record into the Errors table, which has an error_ID, the record_ID and an error message. In addition, if the field fails in a particular way, I have to do a "reset" on that field. A reset might consist of blanking the entire field, or simply replacing the value with another value (e.g. replacing the string with a new one that has all illegals chars taken out). I have a 5,000 line test file. The upload, initial check, and import takes about 5-6 seconds. The detailed error check and insert into the Errors table takes about 5-8 seconds (this file has about 1200 errors in it). However, the "resets" part takes about 40-45 seconds for 750 fields that need to be reset. When I comment out the resets function (returning immediately without actually calling the UPDATE stored proc), the process is very fast. With the resets turned on, the pages take 50 seconds to return. My UPDATE stored proc is using some recommended code from http://sommarskog.se/dynamic_sql.html, whereby it uses CASE instead of dynamic SQL: UPDATE dbo.Records SET dbo.Records.file_ID = CASE @field_name WHEN 'file_ID' THEN @field_value ELSE file_ID END, . . (all 50 varchar field CASE statements here) . WHERE dbo.Records.record_ID = @record_ID Is there any way I can help my performance here. Can I somehow group all of these UPDATE calls into a single transaction? Should I be reworking the UPDATE query somehow? Or is it just sheer quantity of 750+ UPDATEs and things are just slow (it's a quad proc server with 8GB ram). Any suggestions appreciated.

  Read the article

• How do I create a Spring 3 + Tiles 2 webapp using REST-ful URLs?

  - by Ichiro Furusato

  I'm having a heck of a time resolving URLs with Spring 3.0 MVC. I'm just building a HelloWorld to try out how to build a RESTful webapp in Spring, nothing theoretically complicated. All of the examples I've been able to find are based on configurations that pay attention to file extensions ("*.htm" or "*.do"), include an artificial directory name prefix ("/foo") or even prefix paths with a dot (ugly), all approaches that use some artificial regex pattern as a signal to the resolver. For a REST approach I want to avoid all that muck and use only the natural URL patterns of my application. I would assume (perhaps incorrectly) that in web.xml I'd set a url-pattern of "/*" and pass everything to the DispatcherServlet for resolution, then just rely on URL patterns in my controller. I can't reliably get my resolver(s) to catch the URL patterns, and in all my trials this results in a resource not found error, a stack overflow (loop), or some kind of opaque Spring 3 ServletException stack trace — one of my ongoing frustrations with Spring generally is that the error messages are not often very helpful. I want to work with a Tiles 2 resolver. I've located my *.jsp files in WEB-INF/views/ and have a single line index.jsp file at the application root redirecting to the index file set by my layout.xml (the Tiles 2 Configurer). I do all the normal Spring 3 high-level configuration: <mvc:annotation-driven /> <mvc:view-controller path="/" view-name="index"/> <context:component-scan base-package="com.acme.web.controller" /> ...followed by all sorts of combinations and configurations of UrlBasedViewResolver, InternalResourceViewResolver, UrlFilenameViewController, etc. with all manner of variantions in my Tiles 2 configuration file. Then in my controller I've trying to pick up my URL patterns. Problem is, I can't reliably even get the resolver(s) to catch the patterns to send to my controller. This has now stretched to multiple days with no real progress on something I thought would be very simple to implement. I'm perhaps trying to do too much at once, though I would think this should be a simple (almost a default) configuration. I'm just trying to create a simple HelloWorld-type application, I wouldn't expect this is rocket science. Rather than me post my own configurations (which have ranged all over the map), does anyone know of an online example that: shows a simple Spring 3 MVC + Tiles 2 web application that uses REST-ful URLs (i.e., avoiding forced URL patterns such as file extensions, added directory names or dots) and relies solely on Spring 3 code/annotations (i.e., nothing outside of Spring MVC itself) to accomplish this? Is there an easy way to do this? Thanks very much for any help.

  Read the article

• 404 with spring 3

  - by markjason72

  hi I am going through my first lessons with spring 3.I created a dynamic web app in eclipse with the following structure. spring3mvc \src\my.spring.HelloWorldController.java \WebContent | |-----WEB-INF\jsp\hello.jsp |-----index.jsp |-----web.xml |-----WEB-INF\spring-servlet.xml |-----WEB-INF\lib\...*.jar files I created the spring-servlet.xml as below <context:component-scan base-package="my.spring" /> <bean id="viewResolver" class="org.springframework.web.servlet.view.UrlBasedViewResolver"> <property name="viewClass" value="org.springframework.web.servlet.view.JstlView" /> <property name="prefix" value="/WEB-INF/jsp/" /> <property name="suffix" value=".jsp" /> </bean> and coded the controller package my.spring; import org.springframework.stereotype.Controller; import org.springframework.web.bind.annotation.RequestMapping; import org.springframework.web.servlet.ModelAndView; @Controller public class HelloWorldController { @RequestMapping("/hello") public ModelAndView helloWorld() { String message = "Hello World, Spring 3.0!"; return new ModelAndView("hello", "message", message); } } index.jsp has a link to hello view <html> <body> <a href="hello.html">Say Hello</a> </body> </html> finally in hello.jsp I have put <html> <body> ${message} </body> </html> My web.xml has <display-name>Spring3MVC</display-name> <welcome-file-list> <welcome-file>index.jsp</welcome-file> </welcome-file-list> <servlet> <servlet-name>spring</servlet-name> <servlet-class> org.springframework.web.servlet.DispatcherServlet </servlet-class> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>spring</servlet-name> <url-pattern>*.html</url-pattern> </servlet-mapping> When I run the app on Tomcat6 server( thru eclipse),I can see the index page at http://localhost:8080/Spring3MVC/ .It displays the link to hello page.When I click on it(http://localhost:8080/Spring3MVC/hello.html),I get a 404 error. message /Spring3MVC/hello.html description The requested resource (/Spring3MVC/hello.html) is not available. Any idea how I can solve this? thanks mark.

  Read the article

• segmented reduction with scattered segments

  - by Christian Rau

  I got to solve a pretty standard problem on the GPU, but I'm quite new to practical GPGPU, so I'm looking for ideas to approach this problem. I have many points in 3-space which are assigned to a very small number of groups (each point belongs to one group), specifically 15 in this case (doesn't ever change). Now I want to compute the mean and covariance matrix of all the groups. So on the CPU it's roughly the same as: for each point p { mean[p.group] += p.pos; covariance[p.group] += p.pos * p.pos; ++count[p.group]; } for each group g { mean[g] /= count[g]; covariance[g] = covariance[g]/count[g] - mean[g]*mean[g]; } Since the number of groups is extremely small, the last step can be done on the CPU (I need those values on the CPU, anyway). The first step is actually just a segmented reduction, but with the segments scattered around. So the first idea I came up with, was to first sort the points by their groups. I thought about a simple bucket sort using atomic_inc to compute bucket sizes and per-point relocation indices (got a better idea for sorting?, atomics may not be the best idea). After that they're sorted by groups and I could possibly come up with an adaption of the segmented scan algorithms presented here. But in this special case, I got a very large amount of data per point (9-10 floats, maybe even doubles if the need arises), so the standard algorithms using a shared memory element per thread and a thread per point might make problems regarding per-multiprocessor resources as shared memory or registers (Ok, much more on compute capability 1.x than 2.x, but still). Due to the very small and constant number of groups I thought there might be better approaches. Maybe there are already existing ideas suited for these specific properties of such a standard problem. Or maybe my general approach isn't that bad and you got ideas for improving the individual steps, like a good sorting algorithm suited for a very small number of keys or some segmented reduction algorithm minimizing shared memory/register usage. I'm looking for general approaches and don't want to use external libraries. FWIW I'm using OpenCL, but it shouldn't really matter as the general concepts of GPU computing don't really differ over the major frameworks.

  Read the article

• Why does my Spring Controller direct me to the wrong page?

  - by kc2001

  I am writing my first Spring 3.0.5 MVC app and am confused about why my controller mappings aren't doing what I expect. I have a VerifyPasswordController that is called after a user tries to log in by entering his name and password. // Called upon clicking "submit" from /login @RequestMapping(value = "/verifyPassword", method = RequestMethod.POST) @ModelAttribute("user") public String verifyPassword(User user, BindingResult result) { String email = user.getEmail(); String nextPage = CHOOSE_OPERATION_PAGE; // success case if (result.hasErrors()) { nextPage = LOGIN_PAGE; } else if (!passwordMatches(email, user.getPassword())) { nextPage = LOGIN_FAILURE_PAGE; } else { // success } return nextPage; } I can verify in the debugger that this method is being called, but afterwards, the verifyPassword page is displayed rather than the chooseOperation page. The console output of WebLogic seems to show that my mapping are correct: INFO : org.springframework.web.servlet.mvc.annotation.DefaultAnnotationHandlerMapping - Mapped URL path [/chooseOperation] onto handler 'chooseOperationController' INFO : org.springframework.web.servlet.mvc.annotation.DefaultAnnotationHandlerMapping - Mapped URL path [/chooseOperation.*] onto handler 'chooseOperationController' INFO : org.springframework.web.servlet.mvc.annotation.DefaultAnnotationHandlerMapping - Mapped URL path [/chooseOperation/] onto handler 'chooseOperationController' Here is the ChooseOperationController: @Controller @SessionAttributes("leaveRequestForm") public class ChooseOperationController implements PageIfc, AttributeIfc { @RequestMapping(value = "/chooseOperation") @ModelAttribute("leaveRequestForm") public LeaveRequest setUpLeaveRequestForm( @RequestParam(NAME_ATTRIBUTE) String name) { LeaveRequest form = populateFormFromDatabase(name); return form; } // helper methods omited } I welcome any advice, particularly "generic" techniques for debugging such mapping problems. BTW, I've also tried to "redirect" to the desired page, but got the same result. servlet-context.xml: <?xml version="1.0" encoding="UTF-8"?> <beans:beans xmlns="http://www.springframework.org/schema/mvc" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:beans="http://www.springframework.org/schema/beans" xmlns:context="http://www.springframework.org/schema/context" xsi:schemaLocation=" http://www.springframework.org/schema/mvc http://www.springframework.org/schema/mvc/spring-mvc-3.0.xsd http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-3.0.xsd"> <!-- DispatcherServlet Context: defines this servlet's request-processing infrastructure --> <!-- Enables the Spring MVC @Controller programming model --> <annotation-driven /> <!-- Handles HTTP GET requests for /resources/** by efficiently serving up static resources in the ${webappRoot}/resources directory --> <resources mapping="/resources/**" location="/resources/" /> <!-- Resolves views selected for rendering by @Controllers to .jsp resources in the /WEB-INF/views directory --> <beans:bean class="org.springframework.web.servlet.view.InternalResourceViewResolver"> <beans:property name="prefix" value="/WEB-INF/views/" /> <beans:property name="suffix" value=".jsp" /> </beans:bean> <context:component-scan base-package="com.engilitycorp.leavetracker" /> <beans:bean id="leaveRequestForm" class="com.engilitycorp.leavetracker.model.LeaveRequest" /> </beans:beans> The constants: String LOGIN_FAILURE_PAGE = "loginFailure"; String LOGIN_PAGE = "login"; String CHOOSE_OPERATION_PAGE = "chooseOperation";

  Read the article

• Android - cant read TXT files from SDcard on real mashine?

  - by JustMe

  Hello! When I run the code bellow in the virtual android (1.5) it works well, TextSwitcher shows first 80 chars from each txt file from /sdcard/documents/ , but when I run it on my Samsung Galaxy i7500 (1.6) there are no contents in TextSwitcher, however in LogCat there are FileNames of txt files. My Code: public void getTxtFiles(){ //Scan /sdcard/documents and put .txt files in array File TxtFiles[] String path = Environment.getExternalStorageDirectory().toString()+"/documents/"; String files; File folder = new File(path); if(folder.exists()==false){if (!folder.mkdirs()) { Log.e("TAG", "Create dir in sdcard failed"); return; }} else{ File listOfFiles[] = folder.listFiles(); for (int i = 0; i < listOfFiles.length; i++) { if (listOfFiles[i].isFile()) { files = listOfFiles[i].getName(); if (files.endsWith(".txt") || files.endsWith(".TXT")) { if((files.length()-1)>i){resizeArray(TxtFiles, files.length()+10);} TxtFiles[i]=listOfFiles[i]; System.out.println(TxtFiles[i]); } } }} } private void updateCounter(int Pozicija) { if(Pozicija<0){Toast.makeText(getApplicationContext(), R.string.LastTxt, 5).show(); mCounter++;} else if(TxtFiles[mCounter]!=null){ TextToShow = getContents(TxtFiles[mCounter]); if(TextToShow.length()>80)TextToShow=TextToShow.substring(0, 80); mSwitcher.setText(TextToShow); System.out.println(Pozicija); } else mCounter--; } static public String getContents(File aFile) { //...checks on aFile are elided StringBuilder contents = new StringBuilder(); try { //use buffering, reading one line at a time //FileReader always assumes default encoding is OK! BufferedReader input = new BufferedReader(new FileReader(aFile)); try { String line = null; //not declared within while loop /* * readLine is a bit quirky : * it returns the content of a line MINUS the newline. * it returns null only for the END of the stream. * it returns an empty String if two newlines appear in a row. */ while (( line = input.readLine()) != null){ contents.append(line); contents.append(System.getProperty("line.separator")); } } finally { input.close(); } } catch (IOException ex){ ex.printStackTrace(); } return contents.toString(); } And I am able to write contents of those files though LogCat! Any ideas?

  Read the article

• Proper HTML technique to create an web form out of an image

  - by Lars

  I plan to create an interactive golf score card for my website (XHTML). (Btw. thats how such a scorecard looks like: ScoreCard). So at the end one should be able to insert a score for each hole in the appropriated input field in the virtual scorecard on the website. For me it is very important that the interactive scorecard really looks the same as the original (paper-) scorecard does and so my first approach was to scan and slice the scorecard image to reach that appearance. Here you can see the way I sliced the image: The idea was to insert HTML text input for each score field ending up with something like this: After I sliced the image I reconstructed it using the HTML . To do that I put the image slices as the cell background. <table> <tr> <td style="background: url("slice1.jpg") width="58px" height="25px"> <input type="text"></inputText> </td> </tr> ... </table> At the first moment this worked fine (as Gimp offers quite a nice feature for this). Then the problem was that I had to create a HTML table to create the exact layout. As you can see the lower part of the layout is split up into 3 columns. The middle column is split up into several (for each hole) rows. So the left and right column have to be spanned over those rows. Ok finally that worked, but it lead to some kind of scaling problem. If I zoom in or out on the table the middle column (and only that one) is not scaled the right way. Iam not able to fix this, and so I start doubting if this is the right technique for html image virtualization. Iam really no specialist in the area of creating websites, so I would really appriciate any help on this. Maybe there is a complete other and better technique to do that, as I think it is a common job in webcreation. I couldnt find any nice examples or tuts on that.

  Read the article

• When transactionManager is not named "transactionManager" ...

  - by smallufo

  I am trying Spring 3(.0.2.RELEASE) and JPA2 and Hibernate 3.5.1-Final... One thing upsets me is that spring seems only accept a transaction Manager named "transactionManager" If I don't name it "transactionManager" , Spring will throws NoSuchBeanDefinitionException: No bean named 'transactionManager' is defined. Here is my config : <context:component-scan base-package="destiny.data.mining"/> <context:annotation-config/> <bean id="miningEntityManagerFactory" class="org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean"> <property name="persistenceUnitName" value="mining"/> </bean> <bean id="miningTransactionManager" class="org.springframework.orm.jpa.JpaTransactionManager" > <property name="entityManagerFactory" ref="miningEntityManagerFactory"/> </bean> <tx:advice id="txAdviceMining" transaction-manager="miningTransactionManager"> <tx:attributes> <tx:method name="get*" read-only="true"/> <tx:method name="save*" propagation="REQUIRED"/> <tx:method name="update*" propagation="REQUIRED"/> <tx:method name="delete*" propagation="REQUIRED"/> <tx:method name="*" propagation="SUPPORTS" read-only="true"/> </tx:attributes> </tx:advice> <aop:config> <aop:pointcut id="methods" expression="execution(* destiny.utils.AbstractDao+.*(..))"/> <aop:advisor advice-ref="txAdviceMining" pointcut-ref="methods"/> </aop:config> <tx:annotation-driven transaction-manager="miningTransactionManager"/> In this config , an Entity Manager Factory is not necessarily named "entityManagerFactory" , and "txAdvice" is not necessarily named "txAdvice" , either. But I don't know why on earth Spring requires a transaction manager named "transactionManager" ? Is there any way not to name a transaction manager "transactionManager" ? (I'm running multiple spring config files , so I try my best to avoid name-conflicting) test code : @RunWith(SpringJUnit4ClassRunner.class) @ContextConfiguration(locations={"classpath:mining.xml"}) public class MiningPersonDaoTest { @Inject private EntityManagerFactory miningEntityManagerFactory; @Inject private MiningPersonDao miningPersonDao; @Transactional @Test public void testUpdate() { MiningPerson p = miningPersonDao.get(42L); p.setLocationName("OOXX"); miningPersonDao.update(p); System.out.println(p); } } ii

  Read the article

• 'Scanner' does not name a type error in g++

  - by Max

  Hi. I'm trying to compile code in g++ and I get the following errors: In file included from scanner.hpp:8, from scanner.cpp:5: parser.hpp:14: error: ‘Scanner’ does not name a type parser.hpp:15: error: ‘Token’ does not name a type Here's my g++ command: g++ parser.cpp scanner.cpp -Wall Here's parser.hpp: #ifndef PARSER_HPP #define PARSER_HPP #include <string> #include <map> #include "scanner.hpp" using std::string; class Parser { // Member Variables private: Scanner lex; // Lexical analyzer Token look; // tracks the current lookahead token // Member Functions <some function declarations> }; #endif and here's scanner.hpp: #ifndef SCANNER_HPP #define SCANNER_HPP #include <iostream> #include <cctype> #include <string> #include <map> #include "parser.hpp" using std::string; using std::map; enum { // reserved words BOOL, ELSE, IF, TRUE, WHILE, DO, FALSE, INT, VOID, // punctuation and operators LPAREN, RPAREN, LBRACK, RBRACK, LBRACE, RBRACE, SEMI, COMMA, PLUS, MINUS, TIMES, DIV, MOD, AND, OR, NOT, IS, ADDR, EQ, NE, LT, GT, LE, GE, // symbolic constants NUM, ID, ENDFILE, ERROR }; class Token { public: int tag; int value; string lexeme; Token() {tag = 0;} Token(int t) {tag = t;} }; class Num : public Token { public: Num(int v) {tag = NUM; value = v;} }; class Word : public Token { public: Word() {tag = 0; lexeme = "default";} Word(int t, string l) {tag = t; lexeme = l;} }; class Scanner { private: int line; // which line the compiler is currently on int depth; // how deep in the parse tree the compiler is map<string,Word> words; // list of reserved words and used identifiers // Member Functions public: Scanner(); Token scan(); string printTag(int); friend class Parser; }; #endif anyone see the problem? I feel like I'm missing something incredibly obvious.

  Read the article

• Adding a clustered index to a SQL table: what dangers exist for a live production system?

  - by MoSlo

  Right, keep in mind i need to describe this by abstracting all possible confidential info: I've been put in charge of a 10-year old transactional system of which the majority business logic is implemented at database level (triggers, stored procedures etc). Win2000 server, MSSQL 2000 Enterprise. No immediate plans for replacing/updating the system are being considered :( The core process is a program that executes transactions - specifically, it executes a stored procedure with various parameters, lets call it sp_ProcessTrans. The program executes the stored procedure at asynchronous intervals. By itself, things work fine. But there are 30 instances of this program on remotely located workstations, all of them asynchronously executing sp_ProcessTrans and then retrieving data from the SQL server (execution is pretty regular - ranging 0 to 60 times a minute, depending on what items the program instance is responsible for) . Performance of the system has dropped considerably with 10 yrs of data growth: the reason is the deadlocks and specifically deadlock wait times. The deadlock is on the Employee table. I have discovered: In sp_ProcessTrans' execution, it selects from an Employee table 7 times (dont ask) The select is done on a field that is NOT the primary key No index exists on this field. Thus a table scan is performed. 7 times. per transaction So the reason for deadlocks is clear. I created a non-unique ordered clustered index on the field (field looks good, almost unique, NUM(7), very rarely changes). Immediate improvement in the test environment. The problem is that i cannot simulate the deadlocks in a test environment (I'd need 30 workstations; i'd need to simulate 'realistic' activity on those stations, so visualization is out). I need to know if i must schedule downtime. Creating an index shouldn't be a risky operation for MSSQL, but is there any danger (data corruption in transactions/select statements/extra wait time etc) to create this field index on the production database while the transactions are still taking place? (although i can select a time when transactions are fairly quiet through the 30 stations) Are there any hidden dangers i'm not seeing (not looking forward to needing to restore the DB if something goes wrong, restoring would take a lot of time with 10yrs of data).

  Read the article

• Spring OpenSessionInViewFilter with @Transactional annotation

  - by Gautam

  This is regarding Spring OpenSessionInViewFilter using with @Transactional annotation at service layer. i went through so many stack overflow post on this but still confused about whether i should use OpenSessionInViewFilter or not to avoid LazyInitializationException It would be great help if somebody help me find out answer to below queries. Is it bad practice to use OpenSessionInViewFilter in application having complex schema. using this filter can cause N+1 problem if we are using OpenSessionInViewFilter does it mean @Transactional not required? Below is my Spring config file <context:component-scan base-package="com.test"/> <context:annotation-config/> <bean id="messageSource" class="org.springframework.context.support.ReloadableResourceBundleMessageSource"> <property name="basename" value="resources/messages" /> <property name="defaultEncoding" value="UTF-8" /> </bean> <bean id="propertyConfigurer" class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer" p:location="/WEB-INF/jdbc.properties" /> <bean id="dataSource" class="org.apache.commons.dbcp.BasicDataSource" destroy-method="close" p:driverClassName="${jdbc.driverClassName}" p:url="${jdbc.databaseurl}" p:username="${jdbc.username}" p:password="${jdbc.password}" /> <bean id="sessionFactory" class="org.springframework.orm.hibernate3.LocalSessionFactoryBean"> <property name="dataSource" ref="dataSource" /> <property name="configLocation"> <value>classpath:hibernate.cfg.xml</value> </property> <property name="configurationClass"> <value>org.hibernate.cfg.AnnotationConfiguration</value> </property> <property name="hibernateProperties"> <props> <prop key="hibernate.dialect">${jdbc.dialect}</prop> <prop key="hibernate.show_sql">true</prop> <!-- <prop key="hibernate.hbm2ddl.auto">create</prop> --> </props> </property> </bean> <tx:annotation-driven /> <bean id="transactionManager" class="org.springframework.orm.hibernate3.HibernateTransactionManager"> <property name="sessionFactory" ref="sessionFactory" /> </bean>

  Read the article

• NSString cannot be released

  - by Stanley

  Consider the following method and the caller code block. The method analyses a NSString and extracts a "http://" string which it passes out by reference as an auto release object. Without releasing g_scan_result, the program works as expected. But according to non-arc rules, g_scan_result should be released since a retain has been called against it. My question are : Why g_scan_result cannot be released ? Is there anything wrong the way g_scan_result is handled in the posted coding below ? Is it safe not to release g_scan_result as long as the program runs correctly and the XCode Memory Leak tool does not show leakage ? Which XCode profile tools should I look into to check and under which subtitle ? Hope somebody knowledgeable could help. - (long) analyse_scan_result :(NSString *)scan_result target_url :(NSString **)targ_url { NSLog (@" RES analyse string : %@", scan_result); NSRange range = [scan_result rangeOfString:@"http://" options:NSCaseInsensitiveSearch]; if (range.location == NSNotFound) { *targ_url = @""; NSLog(@"fnd string not found"); return 0; } NSString *sub_string = [scan_result substringFromIndex : range.location]; range = [sub_string rangeOfString : @" "]; if (range.location != NSNotFound) { sub_string = [sub_string substringToIndex : range.location]; } NSLog(@" FND sub_string = %@", sub_string); *targ_url = sub_string; return [*targ_url length]; } The following is the caller code block, also note that g_scan_result has been declared and initialized (on another source file) as : NSString *g_scan_result = nil; Please do send a comment or answer if you have suggestions or find possible errors in code posted here (or above). Xcode memory tools does not seem to show any memory leak. But it may be because I do not know where to look as am new to the memory tools. { long url_leng = [self analyse_scan_result:result target_url:&targ_url]; NSLog(@" TAR target_url = %@", targ_url); UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Scanned Result" message:result delegate:g_alert_view_delegate cancelButtonTitle:@"OK" otherButtonTitles:nil]; if (url_leng) { // ****** The 3 commented off statements // ****** cannot be added without causing // ****** a crash after a few scan result // ****** cycles. // ****** NSString *t_url; if (g_system_status.language_code == 0) [alert addButtonWithTitle : @"Open"]; else if (g_system_status.language_code == 1) [alert addButtonWithTitle : @"Abrir"]; else [alert addButtonWithTitle : @"Open"]; // ****** t_url = g_scan_result; g_scan_result = [targ_url retain]; // ****** [t_url release]; } targ_url = nil; [alert show]; [alert release]; [NSTimer scheduledTimerWithTimeInterval:5.0 target:self selector:@selector(activate_qr_scanner:) userInfo:nil repeats:NO ]; return; }

  Read the article

• Spring noHandlerFound

  - by Justin

  I am trying to set up my Spring MVC testing environment. But I always get this noHandlerFound error: Aug 21, 2014 4:43:25 PM org.springframework.web.servlet.DispatcherServlet noHandlerFound WARNING: No mapping found for HTTP request with URI [/restful/firstPage] in DispatcherServlet with name 'spring' Aug 21, 2014 4:47:21 PM org.springframework.web.servlet.DispatcherServlet noHandlerFound WARNING: No mapping found for HTTP request with URI [/restful/firstPage2] in DispatcherServlet with name 'spring' Aug 21, 2014 5:10:27 PM org.springframework.web.servlet.DispatcherServlet noHandlerFound WARNING: No mapping found for HTTP request with URI [/restful/index.html] in DispatcherServlet with name 'spring' I already searched for solution, but none can fix my problem. My spring mvc version: 3.1.3.RELEASE This is my web.xml: <servlet> <servlet-name>spring</servlet-name> <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>spring</servlet-name> <url-pattern>/</url-pattern> </servlet-mapping> <context-param> <param-name>contextConfigLocation</param-name> <param-value> /WEB-INF/applicationContext.xml </param-value> </context-param> this is my spring-servlet.xml: <bean id="viewResolver" class="org.springframework.web.servlet.view.InternalResourceViewResolver" p:prefix="/WEB-INF/jsp/" p:suffix=".jsp" /> this is my applicationContext.xml: <context:annotation-config /> <context:component-scan base-package="test.spring" /> <mvc:annotation-driven /> <mvc:resources mapping="/index.html" location="/index.html" /> <mvc:view-controller path="/firstPage" /> This is my Controller: package test.spring; .... @Controller @RequestMapping("/") public class FirstController { @RequestMapping(value = "firstPage2", method = RequestMethod.GET) public String showFirstPage(Map<String,Object> model){ return "firstPage"; } } My server is tomcat 7, there is no error and warning when it is deployed. I also tried this with no luck: <mvc:default-servlet-handler/> Before I start Spring MVC, I can access index.html

  Read the article

• HP SmartArray P400: How to repair failed logical drive?

  - by TegtmeierDE

  I have a HP Server with SmartArray P400 controller (incl. 256 MB Cache/Battery Backup) with a logicaldrive with replaced failed physicaldrive that does not rebuild. This is how it looked when I detected the error: ~# /usr/sbin/hpacucli ctrl slot=0 show config Smart Array P400 in Slot 0 (Embedded) (sn: XXXX) array A (SATA, Unused Space: 0 MB) logicaldrive 1 (698.6 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 750 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 750 GB, OK) array B (SATA, Unused Space: 0 MB) logicaldrive 2 (2.7 TB, RAID 5, Failed) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 750 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 750 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 750 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 750 GB, Failed) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 750 GB, OK) unassigned physicaldrive 2I:1:8 (port 2I:box 1:bay 8, SATA, 750 GB, OK) ~# I thought that I had drive 2I:1:8 configured as a spare for Array A and Array B, but it seems this was not the case :-(. I noticed the problem due to I/O errors on the host, even if only 1 physicaldrive of the RAID5 is failed. Does someone know why this could happen? The logicaldrive should go into "Degraded" mode but still be fully accessible from the host os!? I first tried to add the unassigned drive 2I:1:8 as a spare to logicaldrive 2, but this was not possible: ~# /usr/sbin/hpacucli ctrl slot=0 array B add spares=2I:1:8 Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. ~# Interestingly it is possible to add the unassigned drive to the first array without problems. I thought maybe the controller put the array into "failed" state due to the missing spare and protects failed arrays from modification. So I tried was to reenable the logicaldrive (to add the spare afterwards): ~# /usr/sbin/hpacucli ctrl slot=0 ld 2 modify reenable Warning: Any previously existing data on the logical drive may not be valid or recoverable. Continue? (y/n) y Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. ~# But as you can see, re-enabling the logicaldrive this was not possible. Now I replaced the failed drive by hotswapping it with the unassigned drive. The status now looks like this: ~# /usr/sbin/hpacucli ctrl slot=0 show config Smart Array P400 in Slot 0 (Embedded) (sn: XXXX) array A (SATA, Unused Space: 0 MB) logicaldrive 1 (698.6 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 750 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 750 GB, OK) array B (SATA, Unused Space: 0 MB) logicaldrive 2 (2.7 TB, RAID 5, Failed) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 750 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 750 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 750 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 750 GB, OK) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 750 GB, OK) ~# The logical drive is still not accessible. Why is it not rebuilding? What can I do? FYI, this is the configuration of my controller: ~# /usr/sbin/hpacucli ctrl slot=0 show Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: XXXX Cache Serial Number: XXXX RAID 6 (ADG) Status: Enabled Controller Status: OK Chassis Slot: Hardware Revision: Rev E Firmware Version: 5.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Analysis Inconsistency Notification: Disabled Raid1 Write Buffering: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Accelerator Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True ~# Thanks for you help in advance.

  Read the article

• How do I remove a root kit from Windows XP?

  - by Chloe

  I was looking for root kits following these instructions http://computersight.com/software/how-to-manually-remove-rootkit/ and saw this in my boot log: Loaded driver \SystemRoot\System32\Drivers\awhk9fmc.SYS I tried to search for that filename in Google but there was absolutely nothing found. I tried to look at the file on the disk but could not find it. Nearly every other file is there. I even tried to boot in Windows 98 and mount the NTFS and see the file, but it still wasn't there. I ran a full scan with Microsoft Security Essentials but it found nothing. When I rebooted, I saw this line instead: Loaded driver \SystemRoot\System32\Drivers\a6n163gl.SYS How can I remove this? How can I find out what it does? How can I find out when it was put in? How can I find out who wrote it? Here is my full boot log: Service Pack 3 10 31 2012 17:35:36.500 Loaded driver \WINDOWS\system32\ntoskrnl.exe Loaded driver \WINDOWS\system32\hal.dll Loaded driver \WINDOWS\system32\KDCOM.DLL Loaded driver \WINDOWS\system32\BOOTVID.dll Loaded driver sptd.sys Loaded driver ACPI.sys Loaded driver \WINDOWS\system32\DRIVERS\WMILIB.SYS Loaded driver pci.sys Loaded driver isapnp.sys Loaded driver pciide.sys Loaded driver \WINDOWS\system32\DRIVERS\PCIIDEX.SYS Loaded driver MountMgr.sys Loaded driver ftdisk.sys Loaded driver PartMgr.sys Loaded driver VolSnap.sys Loaded driver atapi.sys Loaded driver disk.sys Loaded driver \WINDOWS\system32\DRIVERS\CLASSPNP.SYS Loaded driver fltmgr.sys Loaded driver sr.sys Loaded driver MpFilter.sys Loaded driver KSecDD.sys Loaded driver WudfPf.sys Loaded driver Ntfs.sys Loaded driver NDIS.sys Loaded driver uagp35.sys Loaded driver Mup.sys Loaded driver \SystemRoot\system32\DRIVERS\amdk7.sys Loaded driver \SystemRoot\system32\DRIVERS\sisgrp.sys Loaded driver \SystemRoot\system32\DRIVERS\i8042prt.sys Loaded driver \SystemRoot\system32\DRIVERS\mouclass.sys Loaded driver \SystemRoot\system32\DRIVERS\kbdclass.sys Loaded driver \SystemRoot\system32\DRIVERS\imapi.sys Loaded driver \SystemRoot\system32\DRIVERS\cdrom.sys Loaded driver \SystemRoot\system32\DRIVERS\redbook.sys Loaded driver \SystemRoot\system32\DRIVERS\GEARAspiWDM.sys Loaded driver \SystemRoot\system32\drivers\cmuda.sys Loaded driver \SystemRoot\system32\DRIVERS\usbohci.sys Loaded driver \SystemRoot\system32\DRIVERS\usbehci.sys Loaded driver \SystemRoot\system32\DRIVERS\sisnicxp.sys Loaded driver \SystemRoot\System32\Drivers\avzk9sf5.SYS Loaded driver \SystemRoot\system32\DRIVERS\fdc.sys Loaded driver \SystemRoot\system32\DRIVERS\serial.sys Loaded driver \SystemRoot\system32\DRIVERS\serenum.sys Loaded driver \SystemRoot\system32\DRIVERS\parport.sys Loaded driver \SystemRoot\system32\DRIVERS\gameenum.sys Loaded driver \SystemRoot\system32\DRIVERS\serscan.sys Loaded driver \SystemRoot\system32\drivers\DrmCAudio.sys Loaded driver \SystemRoot\system32\DRIVERS\audstub.sys Loaded driver \SystemRoot\system32\DRIVERS\rasl2tp.sys Loaded driver \SystemRoot\system32\DRIVERS\ndistapi.sys Loaded driver \SystemRoot\system32\DRIVERS\ndiswan.sys Loaded driver \SystemRoot\system32\DRIVERS\raspppoe.sys Loaded driver \SystemRoot\system32\DRIVERS\raspptp.sys Loaded driver \SystemRoot\system32\DRIVERS\msgpc.sys Loaded driver \SystemRoot\system32\DRIVERS\psched.sys Loaded driver \SystemRoot\system32\DRIVERS\ptilink.sys Loaded driver \SystemRoot\system32\DRIVERS\raspti.sys Loaded driver \SystemRoot\system32\DRIVERS\tap0901.sys Loaded driver \SystemRoot\system32\DRIVERS\termdd.sys Loaded driver \SystemRoot\system32\DRIVERS\swenum.sys Loaded driver \SystemRoot\system32\DRIVERS\update.sys Loaded driver \SystemRoot\system32\DRIVERS\mssmbios.sys Loaded driver \SystemRoot\system32\DRIVERS\dtsoftbus01.sys Loaded driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Loaded driver \SystemRoot\system32\DRIVERS\usbhub.sys Loaded driver \SystemRoot\system32\DRIVERS\flpydisk.sys Did not load driver \SystemRoot\System32\Drivers\lbrtfdc.SYS Did not load driver \SystemRoot\System32\Drivers\Sfloppy.SYS Did not load driver \SystemRoot\System32\Drivers\i2omgmt.SYS Did not load driver \SystemRoot\System32\Drivers\Changer.SYS Did not load driver \SystemRoot\System32\Drivers\Cdaudio.SYS Loaded driver \SystemRoot\System32\Drivers\Fs_Rec.SYS Loaded driver \SystemRoot\System32\Drivers\Null.SYS Loaded driver \SystemRoot\System32\Drivers\Beep.SYS Loaded driver \SystemRoot\System32\drivers\vga.sys Loaded driver \SystemRoot\System32\Drivers\mnmdd.SYS Loaded driver \SystemRoot\System32\DRIVERS\RDPCDD.sys Loaded driver \SystemRoot\System32\Drivers\Msfs.SYS Loaded driver \SystemRoot\System32\Drivers\Npfs.SYS Loaded driver \SystemRoot\system32\DRIVERS\rasacd.sys Loaded driver \SystemRoot\system32\DRIVERS\ipsec.sys Loaded driver \SystemRoot\system32\DRIVERS\tcpip.sys Loaded driver \SystemRoot\system32\DRIVERS\netbt.sys Loaded driver \SystemRoot\System32\drivers\afd.sys Loaded driver \SystemRoot\system32\DRIVERS\netbios.sys Did not load driver \SystemRoot\System32\Drivers\PCIDump.SYS Loaded driver \SystemRoot\system32\DRIVERS\srvkp.sys Loaded driver \SystemRoot\system32\DRIVERS\rdbss.sys Loaded driver \SystemRoot\system32\DRIVERS\mrxsmb.sys Loaded driver Loaded driver \SystemRoot\system32\DRIVERS\ipnat.sys Loaded driver \SystemRoot\system32\DRIVERS\wanarp.sys Loaded driver \SystemRoot\System32\Drivers\Fips.SYS Loaded driver \SystemRoot\system32\DRIVERS\ctxusbm.sys Loaded driver \??\C:\WINDOWS\system32\drivers\cbfs3.sys Loaded driver \SystemRoot\System32\Drivers\Fastfat.SYS Loaded driver \SystemRoot\System32\Drivers\Cdfs.SYS Did not load driver \SystemRoot\system32\DRIVERS\rdbss.sys Did not load driver \SystemRoot\system32\DRIVERS\mrxsmb.sys Loaded driver \SystemRoot\system32\drivers\wdmaud.sys Loaded driver \SystemRoot\system32\drivers\sysaudio.sys Loaded driver \SystemRoot\system32\drivers\splitter.sys Loaded driver \SystemRoot\system32\drivers\aec.sys Loaded driver \SystemRoot\system32\drivers\swmidi.sys Loaded driver \SystemRoot\system32\drivers\DMusic.sys Loaded driver \SystemRoot\system32\drivers\kmixer.sys Loaded driver \SystemRoot\system32\drivers\drmkaud.sys Loaded driver \SystemRoot\system32\DRIVERS\mrxdav.sys Loaded driver \SystemRoot\System32\Drivers\ParVdm.SYS Did not load driver \SystemRoot\System32\Drivers\StarOpen.SYS Loaded driver \SystemRoot\system32\DRIVERS\srv.sys Did not load driver \SystemRoot\system32\DRIVERS\ipnat.sys Loaded driver \SystemRoot\System32\Drivers\HTTP.sys

  Read the article

• How can I automatically update Flash Player whenever a new version is released? [closed]

  - by user219950

  Summary: Flash Player Update Service doesn't run on a reliable schedule, and doesn't automatically download and apply updates when it does run. Given the importance of having an up-to-date version of Flash Player installed (for those of us who don't use Chrome with its built-in player), I would like to find a way to ensure that new updates are promptly detected and installed. What follows are the details of my efforts to solve this problem on my own... Appendix A: Flash Player Update Service OK, way back in Flash Player 11.2 (or so?) Adobe added the Flash Player Update Service (FlashPlayerUpdateService.exe), it was supposed to keep the Flash Player updated... Upon installation, FPUS is configured to run as a Windows Service, with Start Type set to Manual. A Scheduled Task (Adobe Flash Player Updater.job) is added to start this service every hour. So far, so good - this set-up avoids having a constantly-running service, but makes sure that the checks are run often enough to catch any updates quickly. Google's software updater is configured in a similar fashion, and that works just fine... ...And yet, when I checked the version of my installed Flash Player, I found it was 11.6.602.180, which, based on looking at the timestamps of the files in C:\Windows\System32\Macromed\Flash was last updated (or installed) on Tue, Mar 12, 2013 --- 3/12/13, 5:00:08pm. I made this observation on Thu, Apr 25, 2013 --- 4/25/13, 7:00:00pm, and upon checking Adobe's website found that the current version of Flash Player was 11.7.700.169. That's over a month since the last update, with a new one clearly available on the website but with no indication that the hourly check running on my machine has noticed it or has any intention of downloading it. Appendix B: running the Flash Player updater manually Once upon a time, running FlashUtil32_<version_Plugin.exe -update plugin would give you a window with an Install button; pressing it would download the installer for the current version (automatically, without opening a browser) and run it, then you'd click thru that installer & be done. It was manual, but it worked! Finding my current installation out of date (see Appendix A), I first tried this manual update process. However... Running FlashUtil32_<version_ActiveX.exe -update activex (in my case, that's FlashUtil32_11_6_602_180_ActiveX.exe -update activex) ...only presents a window with a Download button, clicking that Download button opens my browser to the URL https://get3.adobe.com/flashplayer/update/activex. Running FlashUtil32_<version_Plugin.exe -update plugin (in my case, that's FlashUtil32_11_6_602_180_Plugin.exe -update plugin) ...only presents a window with a Download button, clicking that Download button opens my browser to the URL https://get3.adobe.com/flashplayer/update/plugin. I could continue with the Download page it sent me to, uncheck the foistware box ("Free! McAfee Security Scan Plus"), download that installer (ActiveX, no foistware: install_flashplayer11x32axau_mssd_aih.exe, Plugin, no foistware: install_flashplayer11x32au_mssd_aih.exe) & probably have an updated Flash...but then, what is the point of the Flash Player Update Service if I have to manually download & run another exe? Epilogue I've since come to suspect that the update service is intentionally hobbled to drive early adopters to the manual download page. If this is true, there's probably no solution to this short of writing my own updater; hopefully I am wrong.

  Read the article

• Windows 2008 R2 SMB / CIFS Logging to diagnose Brother MFC Network Scanning

  - by Steven Potter

  I am attempting to setup network scanning on a brother MFC-9970CDW printer. According to the Brother documentation, the printer is setup to connect to any CIFS network share. I applied all of the appropriate setting in the printer however I get a "sending error" when I try to scan a document. When I look at the logs of the 2008 R2 server that I am attempting to connect to; I can see in the security log where the printer successfully authenticates, however nothing else is logged. I would assume that immediately after the authentication, the printer is making a CIFS request and some sort of error is occurring, however I can't seem to find any way to log this information to find out what is going on. Is it possible to get Windows 2008 to log SMB/CIFS traffic? Followup: I installed Microsoft netmon and captured the packets associated with the transaction: 510 3:04:28 PM 7/9/2012 34.4277743 System 192.168.1.134 192.168.1.10 SMB SMB:C; Negotiate, Dialect = NT LM 0.12 {SMBOverTCP:30, TCP:29, IPv4:22} 511 3:04:28 PM 7/9/2012 34.4281246 System 192.168.1.10 192.168.1.134 SMB SMB:R; Negotiate, Dialect is NT LM 0.12 (#0), SpnegoToken (1.3.6.1.5.5.2) {SMBOverTCP:30, TCP:29, IPv4:22} 519 3:04:29 PM 7/9/2012 34.8986214 System 192.168.1.134 192.168.1.10 SMB SMB:C; Session Setup Andx, NTLM NEGOTIATE MESSAGE {SMBOverTCP:30, TCP:29, IPv4:22} 520 3:04:29 PM 7/9/2012 34.8989310 System 192.168.1.10 192.168.1.134 SMB SMB:R; Session Setup Andx, NTLM CHALLENGE MESSAGE - NT Status: System - Error, Code = (22) STATUS_MORE_PROCESSING_REQUIRED {SMBOverTCP:30, TCP:29, IPv4:22} 522 3:04:29 PM 7/9/2012 34.9022870 System 192.168.1.134 192.168.1.10 SMB SMB:C; Session Setup Andx, NTLM AUTHENTICATE MESSAGEVersion:v2, Domain: CORP, User: PRINTSUPOFF, Workstation: BRN001BA9AD1FE6 {SMBOverTCP:30, TCP:29, IPv4:22} 523 3:04:29 PM 7/9/2012 34.9032421 System 192.168.1.10 192.168.1.134 SMB SMB:R; Session Setup Andx {SMBOverTCP:30, TCP:29, IPv4:22} 525 3:04:29 PM 7/9/2012 34.9051855 System 192.168.1.134 192.168.1.10 SMB SMB:C; Tree Connect Andx, Path = \\192.168.1.10\IPC$, Service = ????? {SMBOverTCP:30, TCP:29, IPv4:22} 526 3:04:29 PM 7/9/2012 34.9053083 System 192.168.1.10 192.168.1.134 SMB SMB:R; Tree Connect Andx, Service = IPC {SMBOverTCP:30, TCP:29, IPv4:22} 528 3:04:29 PM 7/9/2012 34.9073573 System 192.168.1.134 192.168.1.10 DFSC DFSC:Get DFS Referral Request, FileName: \\192.168.1.10\NSCFILES, MaxReferralLevel: 3 {SMB:33, SMBOverTCP:30, TCP:29, IPv4:22} 529 3:04:29 PM 7/9/2012 34.9152042 System 192.168.1.10 192.168.1.134 SMB SMB:R; Transact2, Get Dfs Referral - NT Status: System - Error, Code = (549) STATUS_NOT_FOUND {SMB:33, SMBOverTCP:30, TCP:29, IPv4:22} 531 3:04:29 PM 7/9/2012 34.9169738 System 192.168.1.134 192.168.1.10 SMB SMB:C; Tree Disconnect {SMBOverTCP:30, TCP:29, IPv4:22} 532 3:04:29 PM 7/9/2012 34.9170688 System 192.168.1.10 192.168.1.134 SMB SMB:R; Tree Disconnect {SMBOverTCP:30, TCP:29, IPv4:22} As you can see, the DFS referral fails and the transaction is shut down. I can't see any reason for the DFS referral to fail. The only reference I can find online is: https://bugzilla.samba.org/show_bug.cgi?id=8003 Anyone have any ideas for a solution?

  Read the article

• Netgear VPN endpoint drops connectivity to single IP address

  - by Justin Bowers

  I'm having a strange issue with one of the networks I manage recently. We have about 14 different networks connected together through a Netgear hardware VPN. Everything has been running fine (other than standard connectivity problems) for a few years now, but I've hit a wall with a problem that's just cropped up at one of the VPN endpoint locations. Our primary VPN network is on the 192.168.1.0/24 subnet and our other 13 networks are on the 192.168.2.0/24 - 192.168.14.0/24 subnets. We run a terminal server on the 192.168.1.0/24 network with IP address 192.168.1.100. Starting Thursday of last week, we had a problem with connectivity of the 192.168.2.0/24 network to 192.168.1.100. When troubleshooting the problem, I found that Network 2 (192.168.2.0/24) still had connectivity to the Internet as well as VPN connectivity to Network 1 (192.168.1.0/24). We could ping and connect to any other device other than the server with IP address 192.168.1.100. Also, none of our networks had an issue accessing 192.168.1.100. I ran a scan on Network 2 after assigning static IP addresses to one of the workstations but received no response from 192.168.1.100 (looking for possibly a new device that someone had plugged into Network 2 that had a duplicate IP address with the server). Asking the staff, noone had reported connecting a new device to Network 2 as well. I then assigned a secondary IP address of 192.168.1.88 to the server and could ping and connect to the secondary IP address from Network 2, but still couldn't access it via 192.168.1.100. I then just rebooted the Netgear VPN Firewall (FVS318v3) and after it came back up, connectivity to 192.168.1.100 was restored. Beforehand, when checking for devices with a possible duplicate IP address, I did run a check for available wireless access points and stations and found none (our wireless is secured via MAC address access control through a WG102 device). I thought that it may have been a fluke for some reason since everything came back up after a power cycle of the VPN Firewall. Things ran fine for a few days until this afternoon, when the problem happened again. One of our users claimed that they had connectivity problems to the server and after connecting to the computer, I found that I couldn't ping the server address anymore. I could still ping the alternate IP address of the server though, so I went ahead and rebooted the VPN firewall again and connectivity was restored. Unfortunately, I can't find anything in the security or VPN logs of the firewall that helps point me in the right direction, so I thought I would go ahead and ask to see if anyone else has any other insight into why we've started having this problem. I am aware that it could still be a device with a duplicate IP address of the server on Network 2, but every employee claim states that there's been no such new device brought in to the network. I know this is a long read, but any help is appreciated! Thanks, Justin

  Read the article

• A faulty Caviar Blue hard drive?

  - by Glister

  We have a small "homemade" server running fully updated Debian Wheezy (amd64). One hard drive installed: WDC WD6400AAKS. The motherboard is ASUS M4N68T V2. The usual load: CPU: an average of 20% Each week about 50GB of additional space is occupied. About 47GB of uploaded files and 3GB of MySQL data. I'm afraid that the hard drive may be about to fail. I saw Pre-fail on few places when I ran: root@SERVER:/tmp# smartctl -a /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue Serial ATA Device Model: WDC WD6400AAKS-XXXXXXX Serial Number: WD-XXXXXXXXXXXXXXXXXXX LU WWN Device Id: 5 0014ee XXXXXXXXXXXXX Firmware Version: 01.03B01 User Capacity: 640,135,028,736 bytes [640 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Oct 28 18:55:27 2013 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 247) Self-test routine in progress... 70% of test remaining. Total time to complete Offline data collection: (11580) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 136) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 157 146 021 Pre-fail Always - 5108 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2968 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 051 Old_age Always - 0 9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 15445 10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2950 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 426 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2968 194 Temperature_Celsius 0x0022 111 095 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 160 000 Old_age Always - 21716 200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15444 - Error SMART Read Selective Self-Test Log failed: scsi error aborted command Smartctl: SMART Selective Self Test Log Read Failed root@SERVER:/tmp# In one tutorial I read that the pre-fail is a an indication of coming failure, in another tutorial I read that it is not true. Can you guys help me decode the output of smartctl? It would be also nice to share suggestions what should I do if I want to ensure data integrity (about 50GB of new data each week, up to 2TB for the whole period I'm interested in). Maybe I will go with 2x2TB Caviar Black in RAID4?

  Read the article

• Making sense of S.M.A.R.T

  - by James

  First of all, I think everyone knows that hard drives fail a lot more than the manufacturers would like to admit. Google did a study that indicates that certain raw data attributes that the S.M.A.R.T status of hard drives reports can have a strong correlation with the future failure of the drive. We find, for example, that after their first scan error, drives are 39 times more likely to fail within 60 days than drives with no such errors. First errors in re- allocations, offline reallocations, and probational counts are also strongly correlated to higher failure probabil- ities. Despite those strong correlations, we find that failure prediction models based on SMART parameters alone are likely to be severely limited in their prediction accuracy, given that a large fraction of our failed drives have shown no SMART error signals whatsoever. Seagate seems like it is trying to obscure this information about their drives by claiming that only their software can accurately determine the accurate status of their drive and by the way their software will not tell you the raw data values for the S.M.A.R.T attributes. Western digital has made no such claim to my knowledge but their status reporting tool does not appear to report raw data values either. I've been using HDtune and smartctl from smartmontools in order to gather the raw data values for each attribute. I've found that indeed... I am comparing apples to oranges when it comes to certain attributes. I've found for example that most Seagate drives will report that they have many millions of read errors while western digital 99% of the time shows 0 for read errors. I've also found that Seagate will report many millions of seek errors while Western Digital always seems to report 0. Now for my question. How do I normalize this data? Is Seagate producing millions of errors while Western digital is producing none? Wikipedia's article on S.M.A.R.T status says that manufacturers have different ways of reporting this data. Here is my hypothesis: I think I found a way to normalize (is that the right term?) the data. Seagate drives have an additional attribute that Western Digital drives do not have (Hardware ECC Recovered). When you subtract the Read error count from the ECC Recovered count, you'll probably end up with 0. This seems to be equivalent to Western Digitals reported "Read Error" count. This means that Western Digital only reports read errors that it cannot correct while Seagate counts up all read errors and tells you how many of those it was able to fix. I had a Seagate drive where the ECC Recovered count was less than the Read error count and I noticed that many of my files were becoming corrupt. This is how I came up with my hypothesis. The millions of seek errors that Seagate produces are still a mystery to me. Please confirm or correct my hypothesis if you have additional information. Here is the smart status of my western digital drive just so you can see what I'm talking about: james@ubuntu:~$ sudo smartctl -a /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD1001FALS-00E3A0 Serial Number: WD-WCATR0258512 Firmware Version: 05.01D05 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 10 19:52:28 2010 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 179 175 021 Pre-fail Always - 4033 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 270 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1468 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 262 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 46 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 223 194 Temperature_Celsius 0x0022 105 102 000 Old_age Always - 42 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

  Read the article

• Unmountable boot volume blue screen, what should I do?

  - by Josh

  I was trying to install an update from NVIDIA for my GTX 560, but while it was installing, my computer shut off. After a few minutes, I turned it back on. It got to the Windows boot screen and then had a blue screen error and if left on it would just keep doing that. A few details about my PC: I haven't added any new hardware or software, I'm running Windows XP Professional 32 bit and Windows XP Professional 64 bit on the same hard drive for about 2 years now. I have 2 other hard drives also, but I don't have one large enough to hold everything from my main hard drive, so formatting isn't an option. Now, as for what I've done so far: I've scanned the RAM with "memtest - 86 v3.4" and it said that it was good. I scanned the hard drive in question with chkdsk /r and it gets to 50% and tells me something along the lines of "the drive has one or more unrepairable problems". I also tried to use chkdsk on the drive I installed the new copy of Windows XP on and it got to 75% then jumped back down to 50% and stayed there (I had to reboot the pc). So, after that, I turned off auto reboot and got to read the blue screen error code and I looked it up only to find that nobody seems to have this problem, just problems close to it. The error code is 0x000000ed and I've seen a lot of these online but none that matched the detailed part of the code UNMOUNTABLE_BOOT_VOLUME 0x000000ed (0xfffffadf513c19a0, 0xffffffffc0000006, 0, 0) So, I have installed another copy of Windows XP Professional 32 bit on one of my other hard drives in hopes of accessing the data on the drive in question and when it booted it asked if I wanted chkdsk to scan the drive in question and this is what it found: file record segments 12740, 12741, 12742 and 12743 were reported unreadable. Then it says "recovering lost files" but it sits there for a few seconds and then just boots to Windows. I can't access the drive in question from Windows as far as I can tell, it just says "drive not accessible" and when I go to properties it says that the drive has 100% free space. So, after that failed I didn't give up, I looked for another way to access the drive in question. I used a Ubuntu bootable disk and was able to access the drive in question without any problems. However, I can't access the registry editor because it's a .exe file and that won't load from Ubuntu. I made a copy of the "Windows" folder and put it on one of my other drives and that's where I'm stuck at now. I'm sure my drive works fine, I know chkdsk can't fix the problem with it and I know what caused the problem in the first place for the most part, but I don't know what to do about it. I have a laptop that I can use to download and burn disks if needed and I also have the other copy of Windows XP Professional 32 bit that I can use that's installed on the computer in question (so I know it's not a hardware issue). I'm pretty sure it's a driver issue or the update was editing the registry when it shut off and left me when a broken registry. I've tried accessing C:\Windows\System32\CONFIG only to find that the Windows XP disk repair option can't even access the files on the drive in question. It seems I'll need to be able to do everything from Ubuntu unless there is something I haven't tried with the Windows XP disk. I didn't install the update on Windows XP 64 bit but yet it also has the same blue screen error (that's where the error code above came from but I haven't checked to see if they are the same). They both stopped working at the same time, so I assume it's one problem causing both to not work.

  Read the article

• PHP install sqlite3 extension

  - by Kevin

  We are using PHP 5.3.6 here, but we used the --without-sqlite3 command when compiling PHP. (It stands in the 'Configure Command' column). But, it is very risky to recompile PHP on that server; there are many visitors. How can we install/use sqlite3? Regards, Kevin [EDIT] yum repolist gives: Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.nl.leaseweb.net * extras: mirror.nl.leaseweb.net * updates: mirror.nl.leaseweb.net repo id repo name status base CentOS-5 - Base 3,566 extras CentOS-5 - Extras 237 updates CentOS-5 - Updates 376 repolist: 4,179 rpm -qa | grep php gives: php-pdo-5.3.6-1.w5 php-mysql-5.3.6-1.w5 psa-php5-configurator-1.5.3-cos5.build95101022.10 php-mbstring-5.3.6-1.w5 php-imap-5.3.6-1.w5 php-cli-5.3.6-1.w5 php-gd-5.3.6-1.w5 php-5.3.6-1.w5 php-common-5.3.6-1.w5 php-xml-5.3.6-1.w5 php -i | grep sqlite gives: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/sqlite3.so' - /usr/lib64/php/modules/sqlite3.so: cannot open shared object file: No such file or directory in Unknown on line 0 Configure Command => './configure' '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--target=x86_64-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--cache-file=../config.cache' '--with-libdir=lib64' '--with-config-file-path=/etc' '--with-config-file-scan-dir=/etc/php.d' '--disable-debug' '--with-pic' '--disable-rpath' '--without-pear' '--with-bz2' '--with-exec-dir=/usr/bin' '--with-freetype-dir=/usr' '--with-png-dir=/usr' '--with-xpm-dir=/usr' '--enable-gd-native-ttf' '--without-gdbm' '--with-gettext' '--with-gmp' '--with-iconv' '--with-jpeg-dir=/usr' '--with-openssl' '--with-pcre-regex=/usr' '--with-zlib' '--with-layout=GNU' '--enable-exif' '--enable-ftp' '--enable-magic-quotes' '--enable-sockets' '--enable-sysvsem' '--enable-sysvshm' '--enable-sysvmsg' '--with-kerberos' '--enable-ucd-snmp-hack' '--enable-shmop' '--enable-calendar' '--without-mime-magic' '--without-sqlite' '--without-sqlite3' '--with-libxml-dir=/usr' '--enable-xml' '--with-system-tzdata' '--enable-force-cgi-redirect' '--enable-pcntl' '--with-imap=shared' '--with-imap-ssl' '--enable-mbstring=shared' '--enable-mbregex' '--with-gd=shared' '--enable-bcmath=shared' '--enable-dba=shared' '--with-db4=/usr' '--with-xmlrpc=shared' '--with-ldap=shared' '--with-ldap-sasl' '--with-mysql=shared,/usr' '--with-mysqli=shared,/usr/bin/mysql_config' '--enable-dom=shared' '--with-pgsql=shared' '--enable-wddx=shared' '--with-snmp=shared,/usr' '--enable-soap=shared' '--with-xsl=shared,/usr' '--enable-xmlreader=shared' '--enable-xmlwriter=shared' '--with-curl=shared,/usr' '--enable-fastcgi' '--enable-pdo=shared' '--with-pdo-odbc=shared,unixODBC,/usr' '--with-pdo-mysql=shared,/usr' '--with-pdo-pgsql=shared,/usr' '--with-pdo-sqlite=shared,/usr' '--with-pdo-dblib=shared,/usr' '--enable-json=shared' '--enable-zip=shared' '--with-readline' '--with-pspell=shared' '--enable-phar=shared' '--with-mcrypt=shared,/usr' '--with-tidy=shared,/usr' '--with-mssql=shared,/usr' '--enable-sysvmsg=shared' '--enable-sysvshm=shared' '--enable-sysvsem=shared' '--enable-posix=shared' '--with-unixODBC=shared,/usr' '--enable-fileinfo=shared' '--enable-intl=shared' '--with-icu-dir=/usr' '--with-recode=shared,/usr' /etc/php.d/pdo_sqlite.ini, /etc/php.d/sqlite3.ini, PHP Warning: Unknown: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CET/1.0/no DST' instead in Unknown on line 0 PDO drivers => mysql, sqlite pdo_sqlite PWD => /root/sqlite _SERVER["PWD"] => /root/sqlite _ENV["PWD"] => /root/sqlite

  Read the article

• outgoing DNS flood targeted to non-ISP hosts

  - by radudani

  Below is the specific traffic monitored at the network perimeter and originating from a user PC on Vista platform; my question is not about the effects of the flood, but about the nature of the source of it; is this a kind of known infection, or just an application went out of control? a standard NOD32 scan didn't find anything, as the user told me; Thank you for any hint, Danny 14:40:10.115876 IP 192.168.7.42.4122 67.228.0.181.53: S 2742536765:2742536765(0) win 16384 14:40:10.115943 IP 192.168.7.42.4124 67.228.181.207.53: S 3071079888:3071079888(0) win 16384 14:40:10.116015 IP 192.168.7.42.4126 67.228.0.181.53: S 3445199428:3445199428(0) win 16384 14:40:10.116086 IP 192.168.7.42.4128 67.228.181.207.53: S 2053198691:2053198691(0) win 16384 14:40:10.116154 IP 192.168.7.42.4130 67.228.0.181.53: S 2841660872:2841660872(0) win 16384 14:40:10.116222 IP 192.168.7.42.4132 67.228.181.207.53: S 3150822465:3150822465(0) win 16384 14:40:10.116290 IP 192.168.7.42.4134 67.228.0.181.53: S 1692515021:1692515021(0) win 16384 14:40:10.116358 IP 192.168.7.42.4136 67.228.181.207.53: S 3358275919:3358275919(0) win 16384 14:40:10.116430 IP 192.168.7.42.4138 67.228.0.181.53: S 930184999:930184999(0) win 16384 14:40:10.116498 IP 192.168.7.42.4140 67.228.181.207.53: S 1504984630:1504984630(0) win 16384 14:40:10.116566 IP 192.168.7.42.4142 67.228.0.181.53: S 546074424:546074424(0) win 16384 14:40:10.116634 IP 192.168.7.42.4144 67.228.181.207.53: S 4241828590:4241828590(0) win 16384 14:40:10.116702 IP 192.168.7.42.4146 67.228.0.181.53: S 668634627:668634627(0) win 16384 14:40:10.116769 IP 192.168.7.42.4148 67.228.181.207.53: S 3768119461:3768119461(0) win 16384 14:40:10.117360 IP 192.168.7.42.4111 67.228.0.181.53: 12676 op8 Resp12*- [2128q][|domain] 14:40:10.117932 IP 192.168.7.42.4112 67.228.181.207.53: 44190 op7 NotAuth*|$ [29103q],[|domain] 14:40:10.118726 IP 192.168.7.42.4113 67.228.0.181.53: 49196 inv_q [b2&3=0xeea] [64081q] [28317a] [43054n] [23433au] Type63482 (Class 5889)? M-_^OSM-JM-m^_M-i.[|domain] 14:40:10.119934 IP 192.168.7.42.4114 67.228.181.207.53: 48131 updateMA Resp12$ [43850q],[|domain] 14:40:10.121164 IP 192.168.7.42.4115 67.228.0.181.53: 46330 updateM% [b2&3=0x665b] [23691a] [998q] [32406n] [11452au][|domain] 14:40:10.121866 IP 192.168.7.42.4116 67.228.181.207.53: 34425 op7 YXRRSet* [39927q][|domain] 14:40:10.123107 IP 192.168.7.42.4117 67.228.0.181.53: 56536 notify+ [b2&3=0x27e6] [59761a] [23005q] [33341n] [29705au][|domain] 14:40:10.123961 IP 192.168.7.42.4118 67.228.181.207.53: 19323 stat% [b2&3=0x14bb] [32491a] [41925q] [2038n] [5857au][|domain] 14:40:10.132499 IP 192.168.7.42.4119 67.228.0.181.53: 50432 updateMA+ [b2&3=0x6bc2] [10733a] [9775q] [46984n] [15261au][|domain] 14:40:10.133394 IP 192.168.7.42.4120 67.228.181.207.53: 2171 notify Refused$ [26027q][|domain] 14:40:10.134421 IP 192.168.7.42.4121 67.228.0.181.53: 25802 updateM NXDomain*-$ [28641q][|domain] 14:40:10.135392 IP 192.168.7.42.4122 67.228.181.207.53: 2073 updateMA+ [b2&3=0x6d0b] [43177a] [54332q] [17736n] [43636au][|domain] 14:40:10.136638 IP 192.168.7.42.4123 67.228.0.181.53: 15346 updateD+% [b2&3=0x577a] [61686a] [19106q] [15824n] [37833au] Type28590 (Class 64856)? [|domain] 14:40:10.137265 IP 192.168.7.42.4124 67.228.181.207.53: 60761 update+ [b2&3=0x2b66] [43293a] [53922q] [23115n] [11349au][|domain] 14:40:10.148122 IP 192.168.7.42.4125 67.228.0.181.53: 3418 op3% [b2&3=0x1a92] [51107a] [60368q] [47777n] [56081au][|domain]

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >