Search Results

Search found 12484 results on 500 pages for 'seraphims host'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 72/500 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

  • Cisco ASA (Client VPN) to LAN - through second VPN to second LAN

    - by user50855
    We have 2 site that is linked by an IPSEC VPN to remote Cisco ASAs: Site 1 1.5Mb T1 Connection Cisco(1) 2841 Site 2 1.5Mb T1 Connection Cisco 2841 In addition: Site 1 has a 2nd WAN 3Mb bonded T1 Connection Cisco 5510 that connects to same LAN as Cisco(1) 2841. Basically, Remote Access (VPN) users connecting through Cisco ASA 5510 needs access to a service at the end of Site 2. This is due to the way the service is sold - Cisco 2841 routers are not under our management and it is setup to allow connection from local LAN VLAN 1 IP address 10.20.0.0/24. My idea is to have all traffic from Remote Users through Cisco ASA destined for Site 2 to go via the VPN between Site 1 and Site 2. The end result being all traffic that hits Site 2 has come via Site 1. I'm struggling to find a great deal of information on how this is setup. So, firstly, can anyone confirm that what I'm trying to achieve is possible? Secondly, can anyone help me to correct the configuration bellow or point me in the direction of an example of such a configuration? Many Thanks. interface Ethernet0/0 nameif outside security-level 0 ip address 7.7.7.19 255.255.255.240 interface Ethernet0/1 nameif inside security-level 100 ip address 10.20.0.249 255.255.255.0 object-group network group-inside-vpnclient description All inside networks accessible to vpn clients network-object 10.20.0.0 255.255.255.0 network-object 10.20.1.0 255.255.255.0 object-group network group-adp-network description ADP IP Address or network accessible to vpn clients network-object 207.207.207.173 255.255.255.255 access-list outside_access_in extended permit icmp any any echo-reply access-list outside_access_in extended permit icmp any any source-quench access-list outside_access_in extended permit icmp any any unreachable access-list outside_access_in extended permit icmp any any time-exceeded access-list outside_access_in extended permit tcp any host 7.7.7.20 eq smtp access-list outside_access_in extended permit tcp any host 7.7.7.20 eq https access-list outside_access_in extended permit tcp any host 7.7.7.20 eq pop3 access-list outside_access_in extended permit tcp any host 7.7.7.20 eq www access-list outside_access_in extended permit tcp any host 7.7.7.21 eq www access-list outside_access_in extended permit tcp any host 7.7.7.21 eq https access-list outside_access_in extended permit tcp any host 7.7.7.21 eq 5721 access-list acl-vpnclient extended permit ip object-group group-inside-vpnclient any access-list acl-vpnclient extended permit ip object-group group-inside-vpnclient object-group group-adp-network access-list acl-vpnclient extended permit ip object-group group-adp-network object-group group-inside-vpnclient access-list PinesFLVPNTunnel_splitTunnelAcl standard permit 10.20.0.0 255.255.255.0 access-list inside_nat0_outbound_1 extended permit ip 10.20.0.0 255.255.255.0 10.20.1.0 255.255.255.0 access-list inside_nat0_outbound_1 extended permit ip 10.20.0.0 255.255.255.0 host 207.207.207.173 access-list inside_nat0_outbound_1 extended permit ip 10.20.1.0 255.255.255.0 host 207.207.207.173 ip local pool VPNPool 10.20.1.100-10.20.1.200 mask 255.255.255.0 route outside 0.0.0.0 0.0.0.0 7.7.7.17 1 route inside 207.207.207.173 255.255.255.255 10.20.0.3 1 crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto dynamic-map outside_dyn_map 20 set security-association lifetime seconds 288000 crypto dynamic-map outside_dyn_map 20 set security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set reverse-route crypto map outside_map 20 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto map outside_dyn_map 20 match address acl-vpnclient crypto map outside_dyn_map 20 set security-association lifetime seconds 28800 crypto map outside_dyn_map 20 set security-association lifetime kilobytes 4608000 crypto isakmp identity address crypto isakmp enable outside crypto isakmp policy 20 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 group-policy YeahRightflVPNTunnel internal group-policy YeahRightflVPNTunnel attributes wins-server value 10.20.0.9 dns-server value 10.20.0.9 vpn-tunnel-protocol IPSec password-storage disable pfs disable split-tunnel-policy tunnelspecified split-tunnel-network-list value acl-vpnclient default-domain value YeahRight.com group-policy YeahRightFLVPNTunnel internal group-policy YeahRightFLVPNTunnel attributes wins-server value 10.20.0.9 dns-server value 10.20.0.9 10.20.0.7 vpn-tunnel-protocol IPSec split-tunnel-policy tunnelspecified split-tunnel-network-list value YeahRightFLVPNTunnel_splitTunnelAcl default-domain value yeahright.com tunnel-group YeahRightFLVPN type remote-access tunnel-group YeahRightFLVPN general-attributes address-pool VPNPool tunnel-group YeahRightFLVPNTunnel type remote-access tunnel-group YeahRightFLVPNTunnel general-attributes address-pool VPNPool authentication-server-group WinRadius default-group-policy YeahRightFLVPNTunnel tunnel-group YeahRightFLVPNTunnel ipsec-attributes pre-shared-key *

    Read the article

  • centos6.3 varnish3.03 get the wrong backend

    - by Sola.Shawn
    I install varnish3.03 with yum! I got a problem with it my varnish config bellow:** # #backend weibo { .host = "192.168.1.178"; .port = "8080"; .connect_timeout=20s; .first_byte_timeout=20s; .between_bytes_timeout=20s; } #backend smth { .host = "192.168.1.115"; .port = "8080"; .connect_timeout=20s; .first_byte_timeout=20s; .between_bytes_timeout=20s; } #sub vcl_recv { if (req.restarts == 0) { if (req.http.x-forwarded-for) { set req.http.X-Forwarded-For = req.http.X-Forwarded-For + ", " + client.ip; } else { set req.http.X-Forwarded-For = client.ip; } } if (req.request != "GET" && req.request != "HEAD" && req.request != "PUT" && req.request != "POST" && req.request != "TRACE" && req.request != "OPTIONS" && req.request != "DELETE") { # /* Non-RFC2616 or CONNECT which is weird. */ return(pipe); } if (req.request != "GET" && req.request != "HEAD") { # /* We only deal with GET and HEAD by default */ return(pass); } if (req.http.Authorization || req.http.Cookie) { /* Not cacheable by default */ return(pass); } if (req.http.host ~ "^(hk.)?weibo.com"){ set req.http.host = "hk.weibo.com"; set req.backend = weibo; } elseif (req.http.host ~ "^(www.)?newsmth.net"){ set req.http.host = "www.newsmth.net"; set req.backend = smth; } else { error 404 "Unknown virtual host"; } return(lookup); } ##sub vcl_pipe { return(pipe); } #sub vcl_pass { return(pass); } #sub vcl_hash { hash_data(req.url); if(req.http.host) { hash_data(req.http.host); } else { hash_data(server.ip); } return(hash); } #sub vcl_hit { if(req.http.Cache-Control~"no-cache"||req.http.Cache-Control~"max-age=0"||req.http.Pragma~"no-cache"){ set obj.ttl=0s; return (restart); } return(deliver); } #sub vcl_miss { return(fetch); } #sub vcl_fetch { if (beresp.ttl <= 120s || beresp.http.Set-Cookie || beresp.http.Vary == "*") { /* * Mark as "Hit-For-Pass" for the next 2 minutes */ set beresp.ttl = 10s; return (hit_for_pass); } return(deliver); } #sub vcl_deliver { return(deliver); } #sub vcl_init { return(ok); } #sub vcl_fini { return(ok); } and my Win7's hosts file add bellow: 192.168.1.178 www.newsmth.net 192.168.1.178 hk.weibo.com start varnish varnishd -f /etc/varnish/dd.vcl -s malloc,100M -a 0.0.0.0:8000 -T 0.0.0.0:3500<br> but when I access the "hk.weibo.com:8000" it fine, and got: Hello,I am hk.weibo.com! but when access http://www.newsmth.net:8000/, got: Hello,I am hk.weibo.com! <br> My question is why it isn't "Hello,I am www.newsmth.net!"? varnish fetched the content from the wrong backend. Does anyone know how to fix this?

    Read the article

  • Issue in nginx proxying to apache

    - by Luis Masuelli
    My current nginx configuration is as follows: specific configuration for (currently two) domains: server { listen 443 ssl; server_name studiotv.service.tebusco.lan phpmyadmin.service.tebusco.lan; ssl_certificate /home/administrador/nginx-confs/ssl/service.tebusco.lan.crt; ssl_certificate_key /home/administrador/nginx-confs/ssl/service.tebusco.lan.key; location / { proxy_pass http://127.0.0.1:8180; proxy_set_header Host $http_host:8180; } } default configuration for unmatched ssl connections: server { listen 443 default ssl; ssl_certificate /home/administrador/nginx-confs/ssl/service.tebusco.lan.crt; ssl_certificate_key /home/administrador/nginx-confs/ssl/service.tebusco.lan.key; location / { return 403; } } http configuration: server { listen 80; rewrite ^ https://$host$request_uri? permanent; } The intention is clear: Redirect http traffic to https. Proxy each https:// call from phpmyadmin.service.tebusco.lan and studiotv.service.tebusco.lan to apache2. This includes passing a host header, which is detected. Each unmatched ssl connection must return a 403 in nginx. Does not even reach apache2. In the apache2 side of the life, I have a default site, and a non-default site which will match studiotv.service.tebusco.lan: 000-default.conf file (available and enabled): <VirtualHost 127.0.0.1:8180> # The ServerName directive sets the request scheme, hostname and port that # the server uses to identify itself. This is used when creating # redirection URLs. In the context of virtual hosts, the ServerName # specifies what hostname must appear in the request's Host: header to # match this virtual host. For the default virtual host (this file) this # value is not decisive as it is used as a last resort host regardless. # However, you must set it for any further virtual host explicitly. ServerName localhost ServerAdmin webmaster@localhost DocumentRoot /var/www/html <Directory /var/www/html> Order deny,allow Require all granted </Directory> </VirtualHost> # vim: syntax=apache ts=4 sw=4 sts=4 sr noet studiotv.conf file (available and enabled): <VirtualHost *:8180> ServerName studiotv.service.tebusco.lan ServerAdmin [email protected] DocumentRoot /var/www/studiotv <Directory /var/www/studiotv/> Options -Indexes +FollowSymLinks AllowOverride None Order deny,allow Allow from all Require all granted </Directory> # Available loglevels: trace8, ..., trace1, debug, info, notice, warn, # error, crit, alert, emerg. # It is also possible to configure the loglevel for particular # modules, e.g. #LogLevel info ssl:warn # No usamos ${APACHE_LOG_DIR} sino en su lugar /var/log/<host> ErrorLog /var/log/apache2/studiotv/error.log CustomLog /var/log/apache2/studiotv/access.log combined </VirtualHost> # vim: syntax=apache ts=4 sw=4 sts=4 sr noet However, when I hit the browser with http://studiotv.service.tebusco.lan, the default php page is shown instead. Question: What am I missing? (apache 2.4.7, nginx 1.6.0, ubuntu server 14.04).

    Read the article

  • ASR / SNMP on Exadata

    - by rene.kundersma
    Recently I worked with ASR on Exadata for multiple customers. ASR is a great functionality that enables your 'systems' to alert Oracle when hardware failures occur. Sun hardware is using ASM for sometime and since 2009/2010 this is also available for Exadata. My goal is not to re-write the documentation so for general information I like to refer to this link. So, where is this note about ? Well, it is about two things I experienced around setting up ASR. I like to provide my experience so others can be successful with ASR fast as well. (It is however expected that things will be updated in the latest documentation.) First, imagine yourself configuring SNMP traps to be sent to ASR. In this situation be sure to not erase any existing SNMP Subscribers settings for example the subscription to Enterprise Manager Grid Control or whatever you already subscribed for. So, when you have documentation stating to execute "cellcli -e alter cell snmpSubscriber=(host=, port=)" be sure to add existing snmpSubscribers when they exist. The syntax allows this: snmpSubscriber= ((host=host [,port=port] [,community=community][,type=ASR]) [,(host=host[,port=port][,community=community][,type=ASR])...) Second, when configuring SnmpSubscribers using DCLI you have to work with a slash to escape the brackets. Be sure to verify your SNMP settings after setting them because you might end up with a bracket in the 'asrs.state' file stating 'public\' in stead of 'public'. Having the extra slash after the word 'public' of course doesn't help when sending SNMP-traps: dcli -g dbs_group -l root -n "/opt/oracle.cellos/compmon/exadata_mon_hw_asr.pl -validate_snmp_subscriber -type asr" cn38: Sending test trap to destination - 173.25.100.43:162 cn38: (1). count - 50 Failed to run "/usr/bin/snmptrap -v 2c -c public\ -M "+/opt/oracle.cellos/compmon/" -m SUN-HW-TRAP-MIB 173.25.100.43:162 "" SUN-HW- TRAP-MIB::sunHwTrapTestTrap sunHwTrapSystemIdentifier s " Sun Oracle Database Machine secret" sunHwTrapChassisId s "secret" sunHwTrapProductName s "SUN FIRE X4170 SERVER" sunHwTrapTestMessage s "This is a test trap. Exadata Compute Server: cn38.oracle.com "" cn38: getaddrinfo: +/opt/oracle.cellos/compmon/ Name or service not known cn38: snmptrap: Unknown host (+/opt/oracle.cellos/compmon/) All together ASR is a great addition to Exadata that I highly recommend. Some excellent documentation is written on the implementation details and available on MyOracleSupport. See "Oracle Database Machine Monitoring (Doc ID 1110675.1)" Rene Kundersma Technical Architect Oracle Technology Services

    Read the article

  • BizTalk 2009 - BizTalk Benchmark Wizard: Installation

    - by StuartBrierley
    As previously detailed, I have completed a single server installation of BizTalk Server 2009 standard on my development laptop; a MacBook Pro Core2Duo running at 2.16Ghz with 2Gb of RAM.  Following this I also posted on my use of the BizTalk Server Best Practices Anaylser and how to configure the BizTalk SQL Server Jobs.  All of which means that I should have some confidence that I have a decent working BizTalk Server 2009 environment, Next I thought that it would be a good idea to try and get some idea of how this setup performs by carrying out some baseline tests that can then be replicated on the test and live servers. The aim of this would be to allow confident predictions to be made of how any solutions developed on a single "server" installation may be expected to perform when deployed to these multi-server BizTalk Server 2009 standard installations. The BizTalk Benchmark Wizard would seem to be the perfect tool for the job. The BizTalk Benchmark Wizard is a ultility that can be used to gain some validation of a BizTalk installation, giving a level of guidance on whether it is performing as might be expected. This utility should be used after BizTalk Server has been installed and before any solutions are deployed to the environment.  This will ensure that you are getting consistent and clean results from the BizTalk Benchmark Wizard. The BizTalk Benchmark Wizard applies load to the BizTalk Server environment under a choice of specific scenarios. During these scenarios performance counter information is collected and assessed against statistics that are appropriate to the BizTalk Server environment: "The executed scenarios may or may not be relative to any realistic scenario, and is only intended for testing. The BizTalk Benchmark Wizard has been developed in relation to the BizTalk Server 2009 Scale Out Testing Study. More information about the study can be found here: http://msdn.microsoft.com/en-us/library/ee377068(BTS.10).aspx" After downloading and installing the wizard you will need set up the Hosts, Instances and Adapter handlers.  This is done by running a script file using the “cscript” detailed below.  To do this you will need to open a command prompt window and navigate to the script folder; assuming the default installation location this would be C:\Program Files\Blogical\BizTalk Benchmark Wizard\Artefacts\BizTalk. In this folder you should find an InstallHosts.vbs file which can be executed using the following parameters: NTGroupName - The name of the Windows NT group. UserName – The name of the user account running the service instances. Password – The password of the user account running the service instances. Receive Host – The name of the server where you want to run the receive host instance.  Send Host - The name of the server where you want to run the sen host instance. Processing Host - The name of the server where you want to run the process host instance. By default the script is set up for 64 bit hosts, so if you are running in 32 bit environment make sure that you change the following line in the script before continuing: from:   objHS.IsHost32BitOnly = False to:    objHS.IsHost32BitOnly = True If you have a single box installation, your script command might look like this: cscript InstallHosts.vbs "BizTalk Application Users" “\MyUser” “MyPassword” “BtsServer1” “BtsServer1” “BtsServer1” If you have a multi server installation, your script command might look like this: cscript InstallHosts.vbs "MyDomain\BizTalk Application Users" “MyDomain\MyUser” “MyPassword” “BtsServer1” “BtsServer2” “BtsServer2” Running this script will create: Three hosts (BBW_RxHost, BBW_TxHost and BBW_PxHost) Three host instances One send and one receive adapter handler for the WCF NetTcp adapter. You will then need to import the BizTalk MSI via the BizTalk Administration Console.  Open the BizTalk Administration Console, point to the “Applications” node and import the BizTalk Benchmark Wizard.msi found in the same folder as the script above. This will create a “BizTalk Benchmark Wizard” application along with all ports and orchestrations needed. To finish the installation you will need to run the BizTalk Benchmark Wizard.msi on all BizTalk servers to add the assemblies to the Global Assembly Cache (GAC). Next I will look at running the BizTalk Benchmark Wizard.

    Read the article

  • Enable remote VNC from the commandline?

    - by Stefan Lasiewski
    I have one computer running Ubuntu 10.04, and is running Vino, the default VNC server. I have a second Windows box which is running a VNC client, but does not have any X11 capabilities. I am ssh'd into the Ubuntu host from the Windows host, but I forgot to enable VNC access on the Ubuntu host. On the Ubuntu host, is there a way for me to enable VNC connections from the Ubuntu commandline? Update: As @koanhead says below, there is no man page for vino (e.g. man -k vino and info vino return nothing), and vino --help doesn't show any help).

    Read the article

  • Apache port forwarding with ZTE ZXV10 W300 router (provider specific firmware)

    - by dannote
    I'm trying to configure port forwarding for Apache 2.2 installed on Windows XP SP3 with ZTE ZXV10 W300 router. The computer has a static IP 192.168.1.2. Port forwarding is configured as following: Enable true Name Apache Protocol TCP (also tried TCP and UPD) WAN Host Start IP Address empty WAN Host End IP Address empty WAN Connection stream WAN Start Port 8080 WAN End Port 8080 LAN Host IP Address 192.168.1.2 LAN Host Start Port 8080 LAN Host End Port 8080 Port 8080 is open for both TCP and UPD in Windows Brandmauer. Apache configuration: Listen 192.168.1.2:8080 Router Firmware: Hardware Version V1.0.01 Software Version V8.0.02T03_CFA Boot Loader Version V1.1.2 The provider is COMSTAR. I'm not sure but it's said they flash routers with modified firmware. I have also tried to set up Bitcomet port forwarding on port 13514 and failed.

    Read the article

  • Evaluate a Munin graph defined in munin.conf

    - by Ztyx
    Hi, I have defined an additional graph (in Munin, munin.conf) that calculates the total size of my MySQL database. The index and data sizes are extracted from an external plugin. The definition looks like this: [...] [Database;my.host.com] address my.host.com use_node_name yes dbsize.update no dbsize.graph_args --base 1024 -l 0 dbsize.graph_title Total database size dbsize.graph_vlabel bytes dbsize.graph_category mysql dbsize.graph_info The total database size. dbsize.graph_order the_sum dbsize.the_sum.sum \ my.host.com:mysql_size.index \ my.host.com:mysql_size.datas dbsize.the_sum.label data+index dbsize.the_sum.type GAUGE dbsize.the_sum.min 0 [...] Now, is it possible to extract the current value of this graph? Running # munin-run dbsize or # munin-run my.host.com:dbsize does not seem to work.

    Read the article

  • Mod Rewrite - directing HTTP/HTTPS traffic to the appropriate virtual hosts

    - by kce
    I have an Apache2 web server (v. 2.2.16) running on Debian hosting three virtual hosts. The first two hosts are HTTP only (server1 and server2). The last host is HTTPS only (server3). My virtual host configuration files can be found at pastebin. I would like to use mod rewrite to get the following behavior: Any request for http://server3 is re-directed to https://server3 Any request for either https://server1 or https://server2 is re-directed to http://server1 or http://server2 as appropriate. Currently, requesting http://server3 gives you a 403 because indexing is disabled for that host and a request for https://server1 or https://server2 will resolve as https://server3 (as its the only virtual host running SSL). This behavior is not desirable. So far I have added a rewrite rule to the central configuration file (myServerWideConfs.conf), with unfortunately no effect. I was under the impression that this rule (or something similar) should rewrite all https:// requests for server1 and server2 to the proper http:// request. RewriteEngine On RewriteCond %{HTTP_HOST} !^server3 [NC] RewriteRule (.*) http://%{HTTP_HOST} My question is two-fold: What mod rewrite rules should I use to accomplish this? And where should they go? Debian's packaging of Apache has a pretty granular (i.e., fractured) configuration file layout; should my rewrite rules go in /etc/apache2/apache2.conf, /etc/apache2/conf.d/myServerWideConfs.conf, or the individual virtual host files? Is mod rewrite the right tool to accomplish this or am I missing something in my greater apache configuration?

    Read the article

  • Apache port forwarding with ZTE ZXV10 W300 router (provider specific firmware)

    - by dannote
    I'm trying to configure port forwarding for Apache 2.2 installed on Windows XP SP3 with ZTE ZXV10 W300 router. The computer has a static IP 192.168.1.2. Port forwarding is configured as following: Enable true Name Apache Protocol TCP (also tried TCP and UPD) WAN Host Start IP Address empty WAN Host End IP Address empty WAN Connection stream WAN Start Port 8080 WAN End Port 8080 LAN Host IP Address 192.168.1.2 LAN Host Start Port 8080 LAN Host End Port 8080 Port 8080 is open for both TCP and UPD in Windows Brandmauer. Apache configuration: Listen 192.168.1.2:8080 Router Firmware: Hardware Version V1.0.01 Software Version V8.0.02T03_CFA Boot Loader Version V1.1.2 The provider is COMSTAR. I'm not sure but it's said they flash routers with modified firmware. I have also tried to set up Bitcomet port forwarding on port 13514 and failed.

    Read the article

  • How to prevent a hacked-server from spoofing a master server?

    - by Cody Smith
    I wish to setup a room-based multilayer game model where players may host matches and serve as host (IE the server with authoritative power). I wish to host a master server which tracks player's items, rank, cash, exp, etc. In such a model, how can I prevent someone that is hosting a game (with a modified server) from spoofing the master server with invalid match results, thus gaining exp, money or rankings. Thanks. -Cody

    Read the article

  • Windows 7 - traceroute hop with high latency! [closed]

    - by Mac
    I've been experiencing this problem for quite a while, and it's quite frustrating. I'll do a traceroute, to www.l.google.com, for example. This is the result (please note: I will replace some parts of personal information with text - i.e. ISP.IP is in reality an actual IP address, and ISPNAME replaces the actual ISP name): Tracing route to www.l.google.com [173.194.34.212] over a maximum of 30 hops: 1 1 ms 1 ms <1 ms 192.168.1.1 2 9 ms 8 ms 10 ms ISP.EXCHANGE.NAME [ISP.IP.172.205] 3 161 ms 171 ms 177 ms host-ISP.IP.215.246.ISPNAME.net [ISP.IP.215.246] 4 12 ms 9 ms 10 ms host-ISP.IP.215.246.ISPNAME.net [ISP.IP.215.246] 5 10 ms 9 ms 17 ms host-ISP.IP.224.165.ISPNAME.net [ISP.IP.224.165] 6 10 ms 9 ms 10 ms 10.42.0.3 7 9 ms 9 ms 10 ms host-ISP.IP.202.129.ISPNAME.net [ISP.IP.202.129] 8 10 ms 9 ms 9 ms host-ISP.IP.209.33.ISPNAME.net [ISP.IP.209.33] 9 77 ms 129 ms 164 ms host-ISP.IP.198.162.ISPNAME.net [ISP.IP.198.162] 10 43 ms 42 ms 43 ms 72.14.212.13 11 42 ms 42 ms 42 ms 209.85.252.36 12 59 ms 59 ms 59 ms 209.85.241.210 13 60 ms 76 ms 68 ms 72.14.237.124 14 59 ms 59 ms 58 ms mad01s08-in-f20.1e100.net [173.194.34.212] Trace complete. Notice that there is a spike on the 3rd hop, but also notice that the 3rd and 4th hop are to the exact same destination. Furthermore, when I ping the offended hop separately, I get the low latency I would expect to that server: Pinging ISP.IP.215.246 with 32 bytes of data: Reply from ISP.IP.215.246: bytes=32 time=10ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=9ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=12ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=9ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=10ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=9ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=10ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=9ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=10ms TTL=253 Reply from ISP.IP.215.246: bytes=32 time=10ms TTL=253 Ping statistics for ISP.IP.215.246: Packets: Sent = 10, Received = 10, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 9ms, Maximum = 12ms, Average = 9ms I'm baffled as to why or how this is happening, and it seems to "fix itself" at random times. Here is an example of where it was working as expected: http://i.imgur.com/bysno.png Notice how many fewer hops were taken. Please note that all the posted results occurred within 10 minutes of testing. I've tried contacting my ISP, and they seem clueless; in their eyes, as long as "the download speed is not slow", then they're doing everything right. Any insight would be very much appreciated, and thanks in advanced!

    Read the article

  • How do you develop web applications? [closed]

    - by ck3g
    How do you and/or your team develop your web applications? Language, framework or platform doesn't matter. I would like to know about the structure of your environment. For example: Using IDE on workstation and project files on remote host accessing via sftp. Files are saved instantly on remote host; All files are local and are uploaded on remote host during saving; Files are local, web server is running on local computer and is tested at local host. etc. You could write down also about the benefits of your approach, this will be useful for me. Thanks upd: Here must be a question and here it is: which is the best approach by your opinion?

    Read the article

  • Ports do not open after rules appended in iptables

    - by user2699451
    I have a server that I am trying to setup for OpenVPN. I have followed all the steps, but I see that when I try to connect to it in Windows, it doesn't allow me, it just hangs on connecting, so I did a nmap scan and I see that port 1194 is not open so naturally I append the rule to open 1194 with: iptables -A INPUT -i eth0 -p tcp --dport 1194 -j ACCEPT followed by service iptables save and service iptables restart which all executed successfully. Then I try again, but it doesn't work and another nmap scan says that port 1194 is closed. Here is the iptables configuration: # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *nat :PREROUTING ACCEPT [27410:3091993] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [5042:376160] -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -j SNAT --to-source 41.185.26.238 -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE COMMIT # Completed on Thu Oct 31 09:47:38 2013 # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *filter :INPUT ACCEPT [23571:2869068] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [27558:3656524] :vl - [0:0] -A INPUT -p tcp -m tcp --dport 5252 -m comment --comment "SSH Secure" -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 8 -m state --state NEW,RELATED,ESTABLISHED -$ -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -m comment --comment "SSH" -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -m comment --comment "HTTP" -j ACCEPT -A INPUT -p tcp -m tcp --dport 8080 -m comment --comment "HTTPS" -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -m comment --comment "HTTP Encrypted" -j ACCEP$ -A INPUT -i eth0 -p tcp -m tcp --dport 1723 -j ACCEPT -A INPUT -i eth0 -p gre -j ACCEPT -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A FORWARD -i ppp+ -o eth0 -j ACCEPT -A FORWARD -i eth0 -o ppp+ -j ACCEPT -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 10.8.0.0/24 -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-port-unreachable -A OUTPUT -p icmp -m icmp --icmp-type 0 -m state --state RELATED,ESTABLISHED -j A$ COMMIT # Completed on Thu Oct 31 09:47:38 2013 and my nmap scan from: localhost: nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds remote pc: nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.025s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 15.70 seconds So, I do not know what is causing this, any assistance will be appreciated! UPDATE AFTER FIRST ANSWER::: [root@RLA04-NIX1 ~]# iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -j REJECT [root@RLA04-NIX1 ~]# iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE [root@RLA04-NIX1 ~]# service iptables save iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ] [root@RLA04-NIX1 ~]# service iptables restart iptables: Flushing firewall rules: [ OK ] iptables: Setting chains to policy ACCEPT: filter nat [ OK ] iptables: Unloading modules: [ OK ] iptables: Applying firewall rules: [ OK ] [root@RLA04-NIX1 ~]# lsof -i :1194 -bash: lsof: command not found iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5252 /* SSH Secure */ ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 state NEW,RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 /* SSH */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 /* HTTP */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080 /* HTTPS */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 /* HTTP Encrypted */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:1723 ACCEPT 47 -- 0.0.0.0/0 0.0.0.0/0 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:1194 Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 0 state RELATED,ESTABLISHED Chain vl (0 references) target prot opt source destination [root@RLA04-NIX1 ~]# nmap localhostt Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST remote pc nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:11 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.020s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 4.18 seconds localhost nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds UPDATE AFTER SCANNING UDP PORTS Sorry, I am noob, I am still learning, but here is the output for: nmap -sU [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:33 SAST Nmap scan report for [server address] ([server ip]) Host is up (0.021s latency). Not shown: 997 open|filtered ports PORT STATE SERVICE 53/udp closed domain 123/udp closed ntp 33459/udp closed unknown Nmap done: 1 IP address (1 host up) scanned in 8.57 seconds btw, no changes have been made since post started (except for iptables changes)

    Read the article

  • chromium-browser --proxy-server debugging

    - by user3678068
    Many places online have pointed out to configure chromium proxy via command can be achieve with the following line chromium-browser --proxy-server=[username]:[password]@[host]:[port] but I got this result on every request. Here's the output in the command line right after executing the previous command. (They do not appear to be relevant. There are no new command line output when I try to visit a page) libGL error: failed to authenticate magic 30 libGL error: failed to load driver: vboxvideo ATTENTION: default value of option force_s3tc_enable overridden by environment. [29551:29551:0606/160459:ERROR:sandbox_linux.cc(268)] InitializeSandbox() called with multiple threads in process gpu-process I have double checked that the proxy credential works with the foxyproxy chrome plugin. What else can I try to figure this out? [Edit] Going to chrome://net-internals/#proxy and reading "Effective proxy settings" if I do chromium-browser with no flags, I get Use DIRECT connections. Source: GSETTINGS if chromium-browser --proxy-server=[host]:[port], I get a message box requesting to login, and under "Effective proxy settings": Proxy server: [host]:[port] if chromium-browser --proxy-server=[user]:[pass]@[host]:[port], "Effective proxy settings" shows: Use DIRECT connections

    Read the article

  • Reverse lookup SERVFAIL

    - by Quan Tran
    I just set up a DNS server and a web server using Virtualbox. The IP address of the DNS server is 192.168.56.101 and the web server 192.168.56.102. Here are my configuration files for the DNS server: named.conf: // // named.conf // // Provided by Red Hat bind package to configure the ISC BIND named(8) DNS // server as a caching only nameserver (as a localhost DNS resolver only). // // See /usr/share/doc/bind*/sample/ for example named configuration files. // options { directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; //query-source address * port 53; //forward first; forwarders { 8.8.8.8; 8.8.4.4; }; listen-on port 53 { 127.0.0.1; 192.168.56.0/24; }; allow-query { localhost; 192.168.56.0/24; }; recursion yes; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; /* Path to ISC DLV key */ bindkeys-file "/etc/named.iscdlv.key"; managed-keys-directory "/var/named/dynamic"; }; logging { channel default_debug { file "data/named.run"; severity debug 10; print-category yes; print-time yes; print-severity yes; }; }; zone "quantran.com" in { type master; file "named.quantran.com"; }; zone "56.168.192.in-addr.arpa" in { type master; file "named.192.168.56"; allow-update { none; }; }; include "/etc/named.rfc1912.zones"; include "/etc/named.root.key"; named.quantran.com: $TTL 86400 quantran.com. IN SOA dns1.quantran.com. root.quantran.com. ( 100 ; serial 3600 ; refresh 600 ; retry 604800 ; expire 86400 ) IN NS dns1.quantran.com. dns1.quantran.com. IN A 192.168.56.101 www.quantran.com. IN A 192.168.56.102 named.192.168.56: $TTL 86400 $ORIGIN 56.168.192.in-addr.arpa. @ IN SOA dns1.quantran.com. root.quantran.com. ( 100 ; serial 3600 ; refresh 600 ; retry 604800 ; expire 86400 ) ; minimum IN NS dns1.quantran.com. 101.56.168.192.in-addr.arpa. IN PTR dns1.quantran.com. 102 IN PTR www.quantran.com. When I try a normal lookup from the host (I configured so that the only nameserver the host uses is the DNS server 192.168.56.101): quan@quantran:~$ host www.quantran.com www.quantran.com has address 192.168.56.102 quan@quantran:~$ host dns1.quantran.com dns1.quantran.com has address 192.168.56.101 But when I try a reverse lookup: quan@quantran:~$ host -v 192.168.56.101 192.168.56.101 Trying "101.56.168.192.in-addr.arpa" Using domain server: Name: 192.168.56.101 Address: 192.168.56.101#53 Aliases: Host 101.56.168.192.in-addr.arpa not found: 2(SERVFAIL) Received 45 bytes from 192.168.56.101#53 in 0 ms quan@quantran:~$ host -v 192.168.56.102 192.168.56.101 Trying "102.56.168.192.in-addr.arpa" Using domain server: Name: 192.168.56.101 Address: 192.168.56.101#53 Aliases: Host 102.56.168.192.in-addr.arpa not found: 2(SERVFAIL) Received 45 bytes from 192.168.56.101#53 in 0 ms So why can't I perform a reverse lookup? Anything wrong with the zone configuration files? Thanks in advance :) Oh, here is the output from the log file /var/named/data/named.run when I perform the reverse lookup: quan@quantran:~$ host 192.168.56.102 192.168.56.101 Using domain server: Name: 192.168.56.101 Address: 192.168.56.101#53 Aliases: Host 102.56.168.192.in-addr.arpa not found: 2(SERVFAIL) /var/named/data/named.run: 02-Jun-2014 15:18:11.950 client: debug 3: client 192.168.56.1#51786: UDP request 02-Jun-2014 15:18:11.950 client: debug 5: client 192.168.56.1#51786: using view '_default' 02-Jun-2014 15:18:11.950 security: debug 3: client 192.168.56.1#51786: request is not signed 02-Jun-2014 15:18:11.950 security: debug 3: client 192.168.56.1#51786: recursion available 02-Jun-2014 15:18:11.950 client: debug 3: client 192.168.56.1#51786: query 02-Jun-2014 15:18:11.950 client: debug 10: client 192.168.56.1#51786: ns_client_attach: ref = 1 02-Jun-2014 15:18:11.950 query-errors: debug 1: client 192.168.56.1#51786: query failed (SERVFAIL) for 102.56.168.192.in-addr.arpa/IN/PTR at query.c:5428 02-Jun-2014 15:18:11.950 client: debug 3: client 192.168.56.1#51786: error 02-Jun-2014 15:18:11.950 client: debug 3: client 192.168.56.1#51786: send 02-Jun-2014 15:18:11.950 client: debug 3: client 192.168.56.1#51786: sendto 02-Jun-2014 15:18:11.951 client: debug 3: client 192.168.56.1#51786: senddone 02-Jun-2014 15:18:11.951 client: debug 3: client 192.168.56.1#51786: next 02-Jun-2014 15:18:11.951 client: debug 10: client 192.168.56.1#51786: ns_client_detach: ref = 0 02-Jun-2014 15:18:11.951 client: debug 3: client 192.168.56.1#51786: endrequest 02-Jun-2014 15:18:11.951 client: debug 3: client @0xb537e008: udprecv Also, I made some changes to the log section in named.conf.

    Read the article

  • Remote logging for multiple Apache virtual hosts using syslog-ng

    - by James
    I'm running a couple Apache web servers that each have 4-8 separate virtual hosts on each of them. I'm trying to setup a dedicated log server that stores each virtual host access and errors logs in a separate directory for that virtual host. For example on the logging server, /var/log/remove/10.0.0.2/virtualhost1 contains access_log and error_log /var/log/remove/10.0.0.2/virtualhost2 contains access_log and error_log /var/log/remove/10.0.0.3/virtualhost3 contains access_log and error_log and so on... Right now I have it split up by host but I can't figure out how to do it additionally by virtual host. Here are the relevant lines from the logging server's syslog-ng.conf source r_src { tcp(ip("0.0.0.0") port(5140)); }; destination r_all { file("/opt/splunk/logs/$HOST"); }; log { source(r_src); destination(r_all); }; Any help would be appreciated. Thanks!

    Read the article

  • Mounting to external NFS from a KVM VM.

    - by jbfink
    I've got a machine acting as a KVM host and another machine that NFS exports to that KVM host. I'd like for one of the internal VMs on the KVM host to be able to mount the NFS share. I can export to the KVM host IP fine and do a mount, but it doesn't work for the internal VM; I just get a failed error with "reason given by server: Permission denied". I've already tried to re-export the NFS from host to VM, but apparently doing two levels of NFS is not a Good Idea. Anyone know how I might get this working?

    Read the article

  • HP Pavilion tx2000 - Wifi adapter no longer works after moving from 12.04 to a 12.10 clean install

    - by Marek L.
    I have a HP Pavilion tx2000 that I have been running Ubuntu 12.04 on for a couple of months without any problems (wifi worked great) until yesterday when my hard drive failed. I replaced the hard drive and decided to install Ubuntu 12.10. Unlike 12.04, the wifi did not work after the installation finished and all the updates where installed (over Ethernet). The network drop down in the top right didn't even show a wireless option. I Googled about for a bit and found some solutions that seemed like they might work. Unfortunately they did not. Here is what I tried: sudo apt-get remove bcmwl-kernel-source sudo apt-get install b43-fwcutter sudo apt-get install firmware-b43-lpphy-installer Restart the computer. And the wifi still didn't work. At which point I panicked a bit and tried to undo the previous commands by running: sudo apt-get remove b43-fwcutter firmware-b43-lpphy-installer sudo apt-get install bcmwl-kernel-source Restart the computer. The wifi still doesn't work. This is where I stopped because I have no idea what I am doing and don't want to mess something up. The network drop down still doesn't show a wireless option and the hardware wifi switch on the laptop is amber (it turns blue when the wifi is on). Using the hardware switch does not change the color. Output from: sudo lspci ... 08:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01) ... Output from: sudo lshw -class network *-network UNCLAIMED description: Network controller product: BCM4322 802.11a/b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1100000-d1103fff ... Output from: sudo rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes UPDATE: After writing up this question tried the following command: sudo rfkill unblock all At first it didn't do anything but after running it about four times, sudo rfkill list all now returns: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no But the network menu still does not have a wireless option and the hardware switch still glows amber. Pushing the hardware switch turns the hard block back on and I have to run sudo rfkill unblock all multiple times again to turn it off. Any help is appreciated! Update 2: Full output from sudo lspci -nn: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605] 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3a) 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304] 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] [1002:9612] 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)

    Read the article

  • VLAN trunking between Juniper EX -> Cisco Catalyst -> and Cisco Router

    - by Hugo Garcia
    I have the following scenario: EX2200 Switch whit ge-0/0/6 set as an access port on VLAN 80 ge-0/0/0 set as a trunk port connected to a catalyst switch and various vlans allowed to pass includin vlan 80 On the Catalyst Switch. port #3 set up as a trunk port that receives traffic from the EX switch. port 46 is set up also as a trunk port that connects to a cisco router. Port #48 is where the host used to be connected host - EX2200 - Catalyst - Router the problem is that this EX2200 is a new addition to the network and the host connected previosly to the catalyst switch. traffic is not getting from the host to the router, but the router can send ARP request to the host. following is the relevant configuration: Catalyst Switch: interface GigabitEthernet1/46 switchport trunk encapsulation dot1q switchport trunk allowed vlan 80,82,83,93,289 switchport mode trunk mtu 1532 media-type rj45 speed 1000 duplex full arp timeout 300 ! interface GigabitEthernet1/48 switchport access vlan 80 switchport mode access mtu 1532 media-type rj45 speed 100 duplex full arp timeout 300 no cdp enable ! EX2200 Switch:

    Read the article

  • sysctl.conf ignore net settings

    - by Steffen Unland
    I have a little problem with sysctl on a Ubuntu 10.04 LTS system. When I set the sysctl values with "sysctl -w " all work fine, but when I try to use the sysctl.conf file. the net settings will be ignored. For example my sysctl.conf # /etc/sysctl.conf - Configuration file for setting system variables kernel.domainname=findme.sysctl # Corefiles information fs.suid_dumpable=2 kernel.core_pattern=/cores/core-%e-%s-%u-%g-%p-%t ##############################################################3 # Functions previously found in netbase net.ipv4.netfilter.ip_conntrack_tcp_timeout_fin_wait=1 net.ipv4.netfilter.ip_conntrack_tcp_timeout_close_wait=1 when I grep to the values, I can see that the sysctl settings for net.ipv4.netfilter don't set. [host:~ ] $ sysctl -a | grep domainname kernel.domainname = findme.sysctl [host:~ ] $ sysctl -a | grep "core_pattern" kernel.core_pattern = /cores/core-%e-%s-%u-%g-%p-%t [host:~ ] $ sysctl -a | grep "timeout_fin_wait" net.netfilter.nf_conntrack_tcp_timeout_fin_wait = 120 net.ipv4.netfilter.ip_conntrack_tcp_timeout_fin_wait = 120 [host:~ ] $ sysctl -a | grep "timeout_close_wait" net.netfilter.nf_conntrack_tcp_timeout_close_wait = 60 net.ipv4.netfilter.ip_conntrack_tcp_timeout_close_wait = 60 can somebody help me to solve the problem? If you need more information I can post it. Cheers, Steffen

    Read the article

  • MinGW MSYS ssh error: Could not create directory '/home/<username>/.ssh'

    - by SoldOut
    I have just installed a fresh MinGW installation on Windows 7 64bit using the Graphical User Interface Installer (the recommended approach) following the instructions given here and keeping the default options (i.e. installation in C:\MinGW) - hopefully without missing any steps or messing things up in any way. However, when running the ssh command, I get the following error: C:\Users\Diablossh username@host Could not create directory '/home/username/.ssh'. The authenticity of host 'username@host (host ip here)' can't be established. RSA key fingerprint is (fingerprint here). Are you sure you want to continue connecting (yes/no)? yes Failed to add the host to the list of known hosts (/home/username/.ssh/known_hosts). So, I basically have to confirm the connection every time. Why does this happen and how do I fix it?

    Read the article

  • NLB RPC server is unavailable on the specified computer

    - by Robin Weston
    Hi guys, Firstly, I'll admit that my networking knowledge is limited so as people request more information I'll update this question accordingly. I am trying to create a NLB Cluster across 2 Windows Server 2008 Web Servers. Neither of the machines are members of a domain, and both have 2 NICs (one for processing external web traffic, and one for communicating internally). I have installed NLB on both machines, and have created a cluster on Host A and added itself to it. However, when I try and add Host B (using the address from the external NIC) I get the following error : "The RPC server is unavailable on the specified computer". On Host B I can see that the RPC service is running fine. I can also ping and RDP from Host A to Host B with no problems either. I have disabled the windows firewall on both machines but that had no effect

    Read the article

  • Nginx no longer servers uwsgi application behind HAProxy - Looks for static file instead

    - by Ralph
    We implemented our web application using web2py. It consists of several modules offering a REST API at various resources (e.g. /dids, /replicas, ...). The API is used by clients implementing requests.py. My problem is that our web app works fine if it's behind HAProxy and hosted by Apache using mod_wsgi. It also works fine if the clients interact with nginx directly. It doesn't work though when using HAProxy in front of nginx. My guess is that HAProxy somehow modifies the request and thus nginx behaves differently i.e. looking for a static file instead of calling the WSGI container. Unfortunately I can't figure out what's exactly going (wr)on(g). Here are the relevant config sections of these three component's config files. At least I guess they are interesting. If you miss anything, please let me know. 1) haproxy.conf frontend app-lb bind loadbalancer:443 ssl crt /etc/grid-security/hostcertkey.pem default_backend nginx-servers mode http backend nginx-servers balance leastconn option forwardfor server nginx-01 nginx-server-int-01.domain.com:80 check 2) nginx.conf: sendfile off; #tcp_nopush on; keepalive_timeout 65; include /etc/nginx/conf.d/*.conf; server { server_name nginx-server-int-01.domain.com; root /path/to/app/; location / { uwsgi_pass unix:///tmp/app.sock; include uwsgi_params; uwsgi_read_timeout 600; # Requests can run for a serious long time } 3) uwsgi.ini [uwsgi] chdir = /path/to/app/ chmod-socket = 777 no-default-app = True socket = /tmp/app.sock manage-script-name = True mount = /dids=did.py mount = /replicas=replica.py callable = application Now when I let my clients go against nginx-server-int-01.domain.com everything is fine. In the access.log of nginx lines like these are appearing: 128.142.XXX.XX0 - - [23/Aug/2014:01:29:20 +0200] "POST /dids/attachments HTTP/1.1" 201 17 "-" "python-requests/2.3.0 CPython/2.6.6 Linux/2.6.32-358.23.2.el6.x86_64" "-" 128.142.XXX.XX0 - - [23/Aug/2014:01:29:20 +0200] "POST /dids/attachments HTTP/1.1" 201 17 "-" "python-requests/2.3.0 CPython/2.6.6 Linux/2.6.32-358.23.2.el6.x86_64" "-" 128.142.XXX.XX0 - - [23/Aug/2014:01:29:20 +0200] "POST /dids/user.ogueta/cnt_mc12_8TeV.16304.stream_name_too_long.other.notype.004202218365415e990b9997ea859f20.user/dids HTTP/1.1" 201 17 "-" "python-requests/2.3.0 CPython/2.6.6 Linux/2.6.32-358.23.2.el6.x86_64" "-" 128.142.XXX.XX0 - - [23/Aug/2014:01:29:20 +0200] "POST /replicas/list HTTP/1.1" 200 5282 "-" "python-requests/2.3.0 CPython/2.6.6 Linux/2.6.32-358.23.2.el6.x86_64" "-" 128.142.XXX.XX0 - - [23/Aug/2014:01:29:20 +0200] "POST /replicas/list HTTP/1.1" 200 5094 "-" "python-requests/2.3.0 CPython/2.6.6 Linux/2.6.32-358.23.2.el6.x86_64" "-" 128.142.XXX.XX0 - - [23/Aug/2014:01:29:20 +0200] "POST /replicas/list HTTP/1.1" 200 528 "-" "python-requests/2.3.0 CPython/2.6.6 Linux/2.6.32-358.23.2.el6.x86_64" "-" 128.142.XXX.XX0 - - [23/Aug/2014:01:29:21 +0200] "GET /dids/mc13_14TeV/dids/search?project=mc13_14TeV&stream_name=%2Adummy&type=dataset&datatype=NTUP_SMDYMUMU HTTP/1.1" 401 73 "-" "python-requests/2.3.0 CPython/2.6.6 Linux/2.6.32-358.23.2.el6.x86_64" "-" 128.142.XXX.XX0 - - [23/Aug/2014:01:29:21 +0200] "POST /replicas/list HTTP/1.1" 200 713 "-" "python-requests/2.3.0 CPython/2.6.6 Linux/2.6.32-358.23.2.el6.x86_64" "-" 128.142.XXX.XX0 - - [23/Aug/2014:01:29:21 +0200] "POST /dids/attachments HTTP/1.1" 201 17 "-" "python-requests/2.3.0 CPython/2.6.6 Linux/2.6.32-358.23.2.el6.x86_64" "-" But when I switch the clients to go against HAProxy (loadbalancer.domain.com:443), the error.log of nginx shows lines like these: 2014/08/23 01:26:01 [error] 1705#0: *21231 open() "/usr/share/nginx/html/dids/attachments" failed (2: No such file or directory), client: 128.142.XXX.XX1, server: localhost, request: "POST /dids/attachments HTTP/1.1", host: "loadbalancer.domain.com" 2014/08/23 01:26:02 [error] 1705#0: *21232 open() "/usr/share/nginx/html/replicas/list" failed (2: No such file or directory), client: 128.142.XXX.XX1, server: localhost, request: "POST /replicas/list HTTP/1.1", host: "loadbalancer.domain.com" 2014/08/23 01:26:02 [error] 1705#0: *21233 open() "/usr/share/nginx/html/dids/attachments" failed (2: No such file or directory), client: 128.142.XXX.XX1, server: localhost, request: "POST /dids/attachments HTTP/1.1", host: "loadbalancer.domain.com" 2014/08/23 01:26:02 [error] 1705#0: *21234 open() "/usr/share/nginx/html/replicas/list" failed (2: No such file or directory), client: 128.142.XXX.XX1, server: localhost, request: "POST /replicas/list HTTP/1.1", host: "loadbalancer.domain.com" 2014/08/23 01:26:02 [error] 1705#0: *21235 open() "/usr/share/nginx/html/dids/attachments" failed (2: No such file or directory), client: 128.142.XXX.XXX, server: localhost, request: "POST /dids/attachments HTTP/1.1", host: "loadbalancer" 2014/08/23 01:26:02 [error] 1705#0: *21238 open() "/usr/share/nginx/html/replicas/list" failed (2: No such file or directory), client: 128.142.XXX.XXX, server: localhost, request: "POST /replicas/list HTTP/1.1", host: "loadbalancer.domain.com" 2014/08/23 01:26:02 [error] 1705#0: *21239 open() "/usr/share/nginx/html/dids/attachments" failed (2: No such file or directory), client: 128.142.XXX.XXX, server: localhost, request: "POST /dids/attachments HTTP/1.1", host: "loadbalancer.domain.com" 2014/08/23 01:26:02 [error] 1705#0: *21242 open() "/usr/share/nginx/html/replicas/list" failed (2: No such file or directory), client: 128.142.XXX.XXX, server: localhost, request: "POST /replicas/list HTTP/1.1", host: "loadbalancer.domain.com" 2014/08/23 01:26:02 [error] 1705#0: *21244 open() "/usr/share/nginx/html/dids/attachments" failed (2: No such file or directory), client: 128.142.XXX.XXX, server: localhost, request: "POST /dids/attachments HTTP/1.1", host: "loadbalancer.domain.com" As you can see, that request looks the same, only the client IP changed, from the client's host to the one from loadbalancer.domain.com. But due to what ever reasons ngxin seems to assume that it is a static file to be served which eventually results in the file not found message. I searched the web for multiple hours already, but without much luck so far. Any help is very much appreciated. Cheers, Ralph

    Read the article

  • Wordpress multisite and redirect

    - by Dr I
    I come to you because I'm facing a really strange effect on my hosting. I currently manage a server contening a NGINX/PHP-CGI and a wordpress multisite in it. My sites are created using subsite.domaine.tld, for now, my three subsites are correctly accessibles through the url: subsite.domain.tld. My goal is to allow my subsite on the host domain to be access through their respective unique domain. For exemple: www.domainA.com would redirect to subsite1.host.domain.tld. If I do that using the following setting on the domainA Public DNS: www 10800 IN CNAME subsite1.host.domain.tld. When I try to access www.domainA.com I don't go to subsite1.host.domain.tld but instead I'm redirect to the Wordpress ROOT site where I create my Network (host.domain.tld). Is there a trick to deal with?

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >