Search Results

Search found 18151 results on 727 pages for 'upside down'.

Page 724/727 | < Previous Page | 720 721 722 723 724 725 726 727  | Next Page >

  • Bi-directional WCF Client-Server Communication

    - by Bill
    I have been working for weeks on creating a client/server to control a music-server application located on the server-side that is controlled by several client apps located across the LAN. I've been successful in getting the client-side to communicate with the Server, sending commands to operate the music-server, and through the use of callbacks, reply to the clients so that all of the client UI's can be appropriately updated. My problem is however, that I unable to figure-out how to broadcast other messages that need to be sent from the server app to the clients. I was hoping to utilize the callback method; however I have not been able to access it from the server side. Do I need to modify or create another contract that provides for communication from the server to the clients? Does the binding require modification? As I mentioned earlier, I have truly been working on this for weeks (which is beginning to feel like 'years'), and hope to get this last piece of the application working. Would someone please steer me in the right direction? Client Side SERVICE REFERENCE: <?xml version="1.0" encoding="utf-8"?> <ServiceReference> <ProxyGenerationParameters ServiceReferenceUri="http://localhost:8001/APService/mex" Name="APGateway" NotifyPropertyChange="True" UseObservableCollection="False"> </ProxyGenerationParameters> <EndPoints> <EndPoint Address="net.tcp://localhost:8000/APService/service" BindingConfiguration="TcpBinding" Contract="APClient.APGateway.APUserService" > </EndPoint> <EndPoint Address="http://localhost:8001/APService/service" BindingConfiguration="HttpBinding" Contract="APClient.APGateway.APUserService" > </EndPoint> </EndPoints> </ServiceReference> Client Side AP CONFIG <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" > <section name="APClient.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" /> </sectionGroup> </configSections> <system.serviceModel> <client> <endpoint address="net.tcp://localhost:8000/APService/service" binding="netTcpBinding" contract="APClient.APGateway.APUserService" name="TcpBinding" /> <endpoint address="http://localhost:8001/APService/service" binding="wsDualHttpBinding" contract="APClient.APGateway.APUserService" name="HttpBinding" /> </client> </system.serviceModel> <applicationSettings> <APClient.Properties.Settings> <setting name="pathToDatabase" serializeAs="String"> <value>C:\Users\Bill\Documents\APData\</value> </setting> </APClient.Properties.Settings> </applicationSettings> Server Side AP.CONFIG <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <behaviors> <serviceBehaviors> <behavior name="MetadataBehavior"> <serviceMetadata httpGetEnabled="true" httpGetUrl="http://localhost:8001/APService/mex" /> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="MetadataBehavior" name="APService.APService"> <endpoint address="service" binding="netTcpBinding" name="TcpBinding" contract="APService.IAPServiceInventory" /> <endpoint address="service" binding="wsDualHttpBinding" name="HttpBinding" contract="APService.IAPServiceInventory" /> <endpoint address="mex" binding="mexHttpBinding" name="MexBinding" contract="IMetadataExchange" /> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:8000/APService/" /> <add baseAddress="http://localhost:8001/APService/" /> </baseAddresses> </host> </service> </services> </system.serviceModel> </configuration> Server Side APSERVICE.CS namespace APService { [ServiceBehavior(ConcurrencyMode=ConcurrencyMode.Single,InstanceContextMode=InstanceContextMode.PerCall)] public class APService : IAPServiceInventory { private static List<IClientCallback> _callbackList = new List<IClientCallback>(); private static int _beerInventory = Convert.ToInt32(System.Configuration.ConfigurationManager.AppSettings["InitialBeerInventory"]); public APService() {} public int SubscribeToServer(string guestName) { IClientCallback guest = OperationContext.Current.GetCallbackChannel<IClientCallback>(); if(!_callbackList.Contains(guest)) { _callbackList.Add(guest); } else { Console.WriteLine(guest + " is already logged onto the Server."); } _callbackList.ForEach(delegate(IClientCallback callback) { callback.NotifyGuestJoinedParty(guestName); }); } public void UpdateClients(string guestName,string UpdateInfo) { _callbackList.ForEach(delegate(IClientCallback callback) { callback.NotifyUpdateClients(guestName,UpdateInfo); }); } public void SendRequestToServer(string guestName, string request) { _callbackList.ForEach(delegate(IClientCallback callback) { callback.NotifyRequestMadeToServer(guestName,request); }); if(request == "Play") { APControl.Play(); } else if(request == "Stop") { APControl.Stop(); } else if(request == "Pause") { APControl.PlayPause(); } else if(request == "Next Track") { APControl.NextTrack(); } else if(request == "Previous Track") { APControl.PreviousTrack(); } else if(request == "Mute") { APControl.Mute(); } else if(request == "Volume Up") { APControl.VolumeUp(5); } else if(request == "Volume Down") { APControl.VolumeDown(5); } } public void CancelServerSubscription(string guestName) { IClientCallback guest = OperationContext.Current.GetCallbackChannel<IClientCallback>(); if(_callbackList.Contains(guest)) { _callbackList.Remove(guest); } _callbackList.ForEach(delegate(IClientCallback callback) { callback.NotifyGuestLeftParty(guestName); }); } } Server Side IAPSERVICE.CS namespace APService { [ServiceContract(Name="APUserService",Namespace="http://AP.com/WCFClientServer/",SessionMode=SessionMode.Required, CallbackContract=typeof(IClientCallback))] public interface IAPServiceInventory { [OperationContract()] int SubscribeToServer(string guestName); [OperationContract(IsOneWay=true)] void SendRequestToServer(string guestName,string request); [OperationContract(IsOneWay=true)] void UpdateClients(string guestName,string UpdateInfo); [OperationContract(IsOneWay=true)] void CancelServerSubscription(string guestName); } } Server side - IAPServiceCallback.cs namespace APService { public interface IClientCallback { [OperationContract(IsOneWay=true)] void NotifyGuestJoinedParty(string guestName); [OperationContract(IsOneWay=true)] void NotifyUpdateClients(string guestName,string UpdateInfo); [OperationContract(IsOneWay=true)] void NotifyRequestMadeToServer(string guestName,string request); [OperationContract(IsOneWay=true)] void NotifyGuestLeftParty(string guestName); }

    Read the article

  • IOException: Unable To Delete Images Due To File Lock

    - by Arslan Pervaiz
    I am Unable To Delete Image File From My Server Path It Gaves Error That The Process Cannot Access The File "FileName" Because it is being Used By Another Process. I Tried Many Methods But Still All In Vain. Please Help me Out in This Issue. Here is My Code Snippet. using System; using System.Data; using System.Web; using System.Data.SqlClient; using System.Web.UI; using System.Web.UI.HtmlControls; using System.Globalization; using System.Web.Security; using System.Text; using System.DirectoryServices; using System.Collections; using System.IO; using System.Drawing; using System.Drawing.Imaging; using System.Drawing.Drawing2D; //============ Main Block ================= byte[] data = (byte[])ds.Tables[0].Rows[0][0]; MemoryStream ms = new MemoryStream(data); Image returnImage = Image.FromStream(ms); returnImage.Save(Server.MapPath(".\\TmpImages\\SavedImage.jpg"), System.Drawing.Imaging.ImageFormat.Jpeg); returnImage.Dispose(); \\ I Tried this Dispose Method To Unlock The File But Nothing Done. ms.Close(); \\ I Tried The Memory Stream Close Method Also But Its Also Not Worked For Me. watermark(); \\ Here is My Water Mark Method That Print Water Mark Image on My Saved Image (Image That is Converted From Byte Array) DeleteImages(); \\ Here is My Delete Method That I Call To Delete The Images //===== ==== My Delete Method To Delete Files================== public void DeleteImages() { try { File.Delete(Server.MapPath(".\\TmpImages\\WaterMark.jpg")); \\This Image Deleted Fine. File.Delete(Server.MapPath(".\\TmpImages\\SavedImage.jpg")); \\ Exception Thrown On Deleting of This Image. } catch (Exception ex) { LogManager.LogException(ex, "Error in Deleting Images."); Master.ShowMessage(ex.Message, true); } } \ ==== Method Declartion That Make Watermark of One Image On Another Image.======= public void watermark() { //create a image object containing the photograph to watermark Image imgPhoto = Image.FromFile(Server.MapPath(".\\TmpImages\\SavedImage.jpg")); int phWidth = imgPhoto.Width; int phHeight = imgPhoto.Height; //create a Bitmap the Size of the original photograph Bitmap bmPhoto = new Bitmap(phWidth, phHeight, PixelFormat.Format24bppRgb); bmPhoto.SetResolution(imgPhoto.HorizontalResolution, imgPhoto.VerticalResolution); //load the Bitmap into a Graphics object Graphics grPhoto = Graphics.FromImage(bmPhoto); //create a image object containing the watermark Image imgWatermark = new Bitmap(Server.MapPath(".\\TmpImages\\PrintasWatermark.jpg")); int wmWidth = imgWatermark.Width; int wmHeight = imgWatermark.Height; //Set the rendering quality for this Graphics object grPhoto.SmoothingMode = SmoothingMode.AntiAlias; //Draws the photo Image object at original size to the graphics object. grPhoto.DrawImage( imgPhoto, // Photo Image object new Rectangle(0, 0, phWidth, phHeight), // Rectangle structure 0, // x-coordinate of the portion of the source image to draw. 0, // y-coordinate of the portion of the source image to draw. phWidth, // Width of the portion of the source image to draw. phHeight, // Height of the portion of the source image to draw. GraphicsUnit.Pixel); // Units of measure //------------------------------------------------------- //to maximize the size of the Copyright message we will //test multiple Font sizes to determine the largest posible //font we can use for the width of the Photograph //define an array of point sizes you would like to consider as possiblities //------------------------------------------------------- //Define the text layout by setting the text alignment to centered StringFormat StrFormat = new StringFormat(); StrFormat.Alignment = StringAlignment.Center; //define a Brush which is semi trasparent black (Alpha set to 153) SolidBrush semiTransBrush2 = new SolidBrush(Color.FromArgb(153, 0, 0, 0)); //define a Brush which is semi trasparent white (Alpha set to 153) SolidBrush semiTransBrush = new SolidBrush(Color.FromArgb(153, 255, 255, 255)); //------------------------------------------------------------ //Step #2 - Insert Watermark image //------------------------------------------------------------ //Create a Bitmap based on the previously modified photograph Bitmap Bitmap bmWatermark = new Bitmap(bmPhoto); bmWatermark.SetResolution(imgPhoto.HorizontalResolution, imgPhoto.VerticalResolution); //Load this Bitmap into a new Graphic Object Graphics grWatermark = Graphics.FromImage(bmWatermark); //To achieve a transulcent watermark we will apply (2) color //manipulations by defineing a ImageAttributes object and //seting (2) of its properties. ImageAttributes imageAttributes = new ImageAttributes(); //The first step in manipulating the watermark image is to replace //the background color with one that is trasparent (Alpha=0, R=0, G=0, B=0) //to do this we will use a Colormap and use this to define a RemapTable ColorMap colorMap = new ColorMap(); //My watermark was defined with a background of 100% Green this will //be the color we search for and replace with transparency colorMap.OldColor = Color.FromArgb(255, 0, 255, 0); colorMap.NewColor = Color.FromArgb(0, 0, 0, 0); ColorMap[] remapTable = { colorMap }; imageAttributes.SetRemapTable(remapTable, ColorAdjustType.Bitmap); //The second color manipulation is used to change the opacity of the //watermark. This is done by applying a 5x5 matrix that contains the //coordinates for the RGBA space. By setting the 3rd row and 3rd column //to 0.3f we achive a level of opacity float[][] colorMatrixElements = { new float[] {1.0f, 0.0f, 0.0f, 0.0f, 0.0f}, new float[] {0.0f, 1.0f, 0.0f, 0.0f, 0.0f}, new float[] {0.0f, 0.0f, 1.0f, 0.0f, 0.0f}, new float[] {0.0f, 0.0f, 0.0f, 0.3f, 0.0f}, new float[] {0.0f, 0.0f, 0.0f, 0.0f, 1.0f}}; ColorMatrix wmColorMatrix = new ColorMatrix(colorMatrixElements); imageAttributes.SetColorMatrix(wmColorMatrix, ColorMatrixFlag.Default, ColorAdjustType.Bitmap); //For this example we will place the watermark in the upper right //hand corner of the photograph. offset down 10 pixels and to the //left 10 pixles int xPosOfWm = ((phWidth - wmWidth) - 10); int yPosOfWm = 10; grWatermark.DrawImage(imgWatermark, new Rectangle(xPosOfWm, yPosOfWm, wmWidth, wmHeight), //Set the detination Position 0, // x-coordinate of the portion of the source image to draw. 0, // y-coordinate of the portion of the source image to draw. wmWidth, // Watermark Width wmHeight, // Watermark Height GraphicsUnit.Pixel, // Unit of measurment imageAttributes); //ImageAttributes Object //Replace the original photgraphs bitmap with the new Bitmap imgPhoto = bmWatermark; grPhoto.Dispose(); grWatermark.Dispose(); //save new image to file system. imgPhoto.Save(Server.MapPath(".\\TmpImages\\WaterMark.jpg"), ImageFormat.Jpeg); imgPhoto.Dispose(); imgWatermark.Dispose(); }

    Read the article

  • Android - BroadcastReceiver CONNECTIVITY ACTION

    - by Marc Ortiz
    in my project there's a service that listens for changes in the connectivity. When wifi is switched off to on then it gets called. The problem it's that i'm using a fragment and inside a fragment there's a button with the setonclicklistener(); and onclick(); SOMETIMES when i touch the button then the service receives an intent that the connectivity has changed (the method gets called without any reason...). Here's the code of my fragment activity for the viewpager layout: public static class FragmentSelection extends Fragment { int mNum; static FragmentSelection newInstance(int num) { FragmentSelection f = new FragmentSelection(); // Supply num input as an argument. Bundle args = new Bundle(); args.putInt("num", num); f.setArguments(args); return f; } /** * When creating, retrieve this instance's number from its arguments. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); mNum = (getArguments() != null ? getArguments().getInt("num") : 1) + 1; } @Override public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) { final View v = inflater.inflate(R.layout.fragment_intro_contenido, container, false); Button btStart = (Button) v.findViewById(R.id.btChanged); final CheckBox cbSMS = (CheckBox) v.findViewById(R.id.checkBoxSms); final CheckBox cbCalls = (CheckBox) v .findViewById(R.id.checkBoxLlamadas); final CheckBox cbApps = (CheckBox) v .findViewById(R.id.checkBoxApps); final CheckBox cbPosition = (CheckBox) v .findViewById(R.id.checkBoxPosicion); final CheckBox cbContacts = (CheckBox) v .findViewById(R.id.checkBoxContactos); final CheckBox cbAll = (CheckBox) v.findViewById(R.id.checkBoxAll); cbSMS.setChecked(true); cbCalls.setChecked(true); cbApps.setChecked(true); cbPosition.setChecked(true); cbContacts.setChecked(true); cbAll.setChecked(true); btStart.setOnClickListener(new View.OnClickListener() { public void onClick(View c) { Intent i = new Intent(); i.setClass(v.getContext(), AnonymeActivity.class); if (!cbSMS.isChecked()) { i.putExtra("sms", 0); } else { i.putExtra("sms", 1); } if (!cbCalls.isChecked()) { i.putExtra("calls", 0); } else { i.putExtra("calls", 1); } if (cbContacts.isChecked()) { i.putExtra("contacts", 1); } else { i.putExtra("contacts", 0); } if (cbApps.isChecked()) { i.putExtra("apps", 1); } else { i.putExtra("apps", 0); } if (!cbPosition.isChecked()) { i.putExtra("gps", 0); } else { i.putExtra("gps", 1); } if (!cbAll.isChecked()) { if (cbSMS.isChecked() && cbCalls.isChecked() && cbContacts.isChecked() && cbApps.isChecked() && cbPosition.isChecked()) { i.putExtra("all", 1); } else { i.putExtra("all", 0); } } else { i.putExtra("all", 1); } startActivity(i); } }); return v; } @Override public void onActivityCreated(Bundle savedInstanceState) { super.onActivityCreated(savedInstanceState); } } My BroadcastReceiver class: class Broadcast_Reciver extends BroadcastReceiver implements Variables { CheckConexion cc; @Override public void onReceive(Context contxt, Intent intent) { // Cuando hay un evento, lo diferenciamos y hacemos una acción. if (intent.getAction().equals(SMS_RECEIVED)) { Sms sms = new Sms(null, contxt); sms.uploadNewSms(intent); } else if (intent.getAction().equals(Intent.ACTION_BATTERY_LOW)) { // st.batterylow(contxt); } else if (intent.getAction().equals(Intent.ACTION_POWER_CONNECTED)) { // st.power(1, contxt); } else if (intent.getAction().equals(Intent.ACTION_POWER_DISCONNECTED)) { // st.power(0, contxt); } else if (intent.getAction().equals(Intent.ACTION_CALL_BUTTON)) { // Notify } else if (intent.getAction().equals(Intent.ACTION_CAMERA_BUTTON)) { // Notify } else if (intent.getAction().equals(Intent.ACTION_PACKAGE_ADDED) || intent.getAction().equals(Intent.ACTION_PACKAGE_CHANGED) || intent.getAction().equals(Intent.ACTION_PACKAGE_REMOVED)) { Database db = new Database(contxt); if (db.open().Preferences(4)) { Uri data = intent.getData(); new ListApps(contxt).import_app(intent, contxt, data, intent.getAction()); } db.close(); } else if (intent.getAction().equals( ConnectivityManager.CONNECTIVITY_ACTION)) { cc = new CheckConexion(contxt); if (cc.isOnline()) { Database db = new Database(contxt); if (db.open().move() == 1) { new UploadOffline(contxt); } db.close(); } } } } And the errors: 9-03 23:20:37.887: E/SqliteDatabaseCpp(2715): CREATE TABLE android_metadata failed 09-03 23:20:37.887: E/SQLiteDatabase(2715): Failed to open the database. closing it. 09-03 23:20:37.887: E/SQLiteDatabase(2715): android.database.sqlite.SQLiteDatabaseLockedException: database is locked 09-03 23:20:37.887: E/SQLiteDatabase(2715): at android.database.sqlite.SQLiteDatabase.native_setLocale(Native Method) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at android.database.sqlite.SQLiteDatabase.setLocale_(SQLiteDatabase.java:2211) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at android.database.sqlite.SQLiteDatabase.setLocale(SQLiteDatabase.java:2199) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at android.database.sqlite.SQLiteDatabase.openDatabase(SQLiteDatabase.java:1130) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at android.database.sqlite.SQLiteDatabase.openDatabase(SQLiteDatabase.java:1081) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at android.database.sqlite.SQLiteDatabase.openOrCreateDatabase(SQLiteDatabase.java:1167) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at android.app.ContextImpl.openOrCreateDatabase(ContextImpl.java:833) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at android.content.ContextWrapper.openOrCreateDatabase(ContextWrapper.java:221) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at android.database.sqlite.SQLiteOpenHelper.getWritableDatabase(SQLiteOpenHelper.java:157) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at com.background.Database.open(Database.java:127) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at <b><b><b><h3>com.background.Broadcast_Reciver.onReceive(BroadcastService.java:100)</h3> 09-03 23:20:37.887: E/SQLiteDatabase(2715): at android.app.LoadedApk$ReceiverDispatcher$Args.run(LoadedApk.java:728) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at android.os.Handler.handleCallback(Handler.java:605) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at android.os.Handler.dispatchMessage(Handler.java:92) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at android.os.Looper.loop(Looper.java:137) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at android.app.ActivityThread.main(ActivityThread.java:4507) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at java.lang.reflect.Method.invokeNative(Native Method) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at java.lang.reflect.Method.invoke(Method.java:511) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:790) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:557) 09-03 23:20:37.887: E/SQLiteDatabase(2715): at dalvik.system.NativeStart.main(Native Method) 09-03 23:20:37.887: D/AndroidRuntime(2715): Shutting down VM 09-03 23:20:37.887: W/dalvikvm(2715): threadid=1: thread exiting with uncaught exception (group=0x40c3b1f8) 09-03 23:20:37.902: E/AndroidRuntime(2715): FATAL EXCEPTION: main 09-03 23:20:37.902: E/AndroidRuntime(2715): java.lang.RuntimeException: Error receiving broadcast Intent { act=android.net.conn.CONNECTIVITY_CHANGE flg=0x10000010 (has extras) } in com.background.Broadcast_Reciver@415203f8 09-03 23:20:37.902: E/AndroidRuntime(2715): at android.app.LoadedApk$ReceiverDispatcher$Args.run(LoadedApk.java:737) 09-03 23:20:37.902: E/AndroidRuntime(2715): at android.os.Handler.handleCallback(Handler.java:605) 09-03 23:20:37.902: E/AndroidRuntime(2715): at android.os.Handler.dispatchMessage(Handler.java:92) 09-03 23:20:37.902: E/AndroidRuntime(2715): at android.os.Looper.loop(Looper.java:137) 09-03 23:20:37.902: E/AndroidRuntime(2715): at android.app.ActivityThread.main(ActivityThread.java:4507) 09-03 23:20:37.902: E/AndroidRuntime(2715): at java.lang.reflect.Method.invokeNative(Native Method) 09-03 23:20:37.902: E/AndroidRuntime(2715): at java.lang.reflect.Method.invoke(Method.java:511) 09-03 23:20:37.902: E/AndroidRuntime(2715): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:790) 09-03 23:20:37.902: E/AndroidRuntime(2715): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:557) 09-03 23:20:37.902: E/AndroidRuntime(2715): at dalvik.system.NativeStart.main(Native Method) 09-03 23:20:37.902: E/AndroidRuntime(2715): Caused by: android.database.sqlite.SQLiteDatabaseLockedException: database is locked 09-03 23:20:37.902: E/AndroidRuntime(2715): at android.database.sqlite.SQLiteDatabase.native_setLocale(Native Method) 09-03 23:20:37.902: E/AndroidRuntime(2715): at android.database.sqlite.SQLiteDatabase.setLocale_(SQLiteDatabase.java:2211) 09-03 23:20:37.902: E/AndroidRuntime(2715): at android.database.sqlite.SQLiteDatabase.setLocale(SQLiteDatabase.java:2199) 09-03 23:20:37.902: E/AndroidRuntime(2715): at android.database.sqlite.SQLiteDatabase.openDatabase(SQLiteDatabase.java:1130) 09-03 23:20:37.902: E/AndroidRuntime(2715): at android.database.sqlite.SQLiteDatabase.openDatabase(SQLiteDatabase.java:1081) 09-03 23:20:37.902: E/AndroidRuntime(2715): at android.database.sqlite.SQLiteDatabase.openOrCreateDatabase(SQLiteDatabase.java:1167) 09-03 23:20:37.902: E/AndroidRuntime(2715): at android.app.ContextImpl.openOrCreateDatabase(ContextImpl.java:833) 09-03 23:20:37.902: E/AndroidRuntime(2715): at android.content.ContextWrapper.openOrCreateDatabase(ContextWrapper.java:221) 09-03 23:20:37.902: E/AndroidRuntime(2715): at android.database.sqlite.SQLiteOpenHelper.getWritableDatabase(SQLiteOpenHelper.java:157) 09-03 23:20:37.902: E/AndroidRuntime(2715): at com.background.Database.open(Database.java:127) 09-03 23:20:37.902: E/AndroidRuntime(2715): at com.background.Broadcast_Reciver.onReceive(BroadcastService.java:100) 09-03 23:20:37.902: E/AndroidRuntime(2715): at android.app.LoadedApk$ReceiverDispatcher$Args.run(LoadedApk.java:728) 09-03 23:20:37.902: E/AndroidRuntime(2715): ... 9 more Checkout that the program goes into BroadcastReceiver class and i don't understand why!

    Read the article

  • Native ComboBox not displaying choices correctly

    - by anothershrubery
    EDIT: It seems that ListPicker is the way to go but I have had further problems with that detailed Microsoft.Phone.Controls.Toolkit ListPicker throws XamlParseException I have the following ComboBox in code: <ComboBox x:Name="Result" Grid.Column="6" HorizontalAlignment="Center" VerticalAlignment="Center" Foreground="Black" Background="White"> <ComboBoxItem Content="Win" /> <ComboBoxItem Content="Place" /> <ComboBoxItem Content="Lose" /> </ComboBox> But it does not display as I would have expected. When you drop down the ComboBox the options don't appear, it's just like empty items. See below: However, when an item is selected, it displays correctly and the correct index/item is returned. See below: I'm sure there is something simple I have missed but can't put my finger on it. EDIT: Ok I am posting the full code for this. I have a user control, OddsRow, that looks like this: <UserControl xmlns:toolkit="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone.Controls.Toolkit" x:Class="MojoPinBetOddsCalculator.OddsRow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" FontFamily="{StaticResource PhoneFontFamilyNormal}" FontSize="{StaticResource PhoneFontSizeNormal}" Foreground="{StaticResource PhoneForegroundBrush}" d:DesignHeight="480" d:DesignWidth="480"> <Grid x:Name="LayoutRoot" Background="{StaticResource PhoneChromeBrush}"> <Grid.RowDefinitions> <RowDefinition Height="70"/> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="50*"></ColumnDefinition> <ColumnDefinition Width="70*"></ColumnDefinition> <ColumnDefinition Width="30*"></ColumnDefinition> <ColumnDefinition Width="70*"></ColumnDefinition> <ColumnDefinition Width="70*"></ColumnDefinition> <ColumnDefinition Width="70*" ></ColumnDefinition> <ColumnDefinition Width="100*"></ColumnDefinition> </Grid.ColumnDefinitions> <TextBlock x:Name="RowNumber" Grid.Column="0" VerticalAlignment="Center" HorizontalAlignment="Center"></TextBlock> <TextBox x:Name="OddsNumerator" Grid.Column="1" Width="90" Height="70" HorizontalAlignment="Center" TextAlignment="Center" VerticalAlignment="Center" MaxLength="3" InputScope="TelephoneNumber"></TextBox> <TextBlock x:Name="Slash" Grid.Column="2" Text="/" HorizontalAlignment="Center" VerticalAlignment="Center"></TextBlock> <TextBox x:Name="OddsDenominator" Grid.Column="3" Width="90" Height="70" VerticalAlignment="Center" TextAlignment="Center" MaxLength="3" HorizontalAlignment="Center" InputScope="TelephoneNumber"></TextBox> <CheckBox x:Name="EachWay" Grid.Column="4" VerticalAlignment="Center" HorizontalAlignment="Center" Margin="10,0,0,0" /> <CheckBox x:Name="Place" Grid.Column="5" HorizontalAlignment="Center" VerticalAlignment="Center" BorderThickness="0" Width="71" Margin="10,0,0,0" Padding="0" /> <ComboBox x:Name="Result" Grid.Column="6" HorizontalAlignment="Center" VerticalAlignment="Center" Foreground="Black" Background="White"> <ComboBoxItem Content="Win" /> <ComboBoxItem Content="Place" /> <ComboBoxItem Content="Lose" /> </ComboBox> </Grid> </UserControl> And it is displayed in the MainPage like so: <phone:PhoneApplicationPage xmlns:my="clr-namespace:MojoPinBetOddsCalculator" x:Class="MojoPinBetOddsCalculator.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:phone="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone" xmlns:shell="clr-namespace:Microsoft.Phone.Shell;assembly=Microsoft.Phone" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignWidth="480" d:DesignHeight="768" FontFamily="{StaticResource PhoneFontFamilyNormal}" FontSize="{StaticResource PhoneFontSizeNormal}" Foreground="{StaticResource PhoneForegroundBrush}" SupportedOrientations="Portrait" Orientation="Portrait" shell:SystemTray.IsVisible="True"> <!--LayoutRoot is the root grid where all page content is placed--> <Grid x:Name="LayoutRoot" Background="Transparent"> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition Height="*"/> </Grid.RowDefinitions> <!--TitlePanel contains the name of the application and page title--> <StackPanel x:Name="TitlePanel" Grid.Row="0" Margin="12,17,0,28"> <TextBlock x:Name="ApplicationTitle" Text="BET ODDS CALCULATOR" Style="{StaticResource PhoneTextNormalStyle}"/> <TextBlock x:Name="PageTitle" Text="calculate" Margin="9,-7,0,0" Style="{StaticResource PhoneTextTitle1Style}"/> </StackPanel> <!--ContentPanel - place additional content here--> <Grid x:Name="ContentPanel" Grid.Row="1" Margin="12,0,12,0" HorizontalAlignment="Stretch"> <Grid x:Name="Scrollable"> <ScrollViewer> <Grid x:Name="BettingGrid"> <Grid.RowDefinitions> <RowDefinition Height="Auto"></RowDefinition> <RowDefinition Height="*"></RowDefinition> </Grid.RowDefinitions> <Grid x:Name="BetList"> <Grid.RowDefinitions> <RowDefinition Height="30"></RowDefinition> <RowDefinition Height="70"></RowDefinition> <RowDefinition Height="70"></RowDefinition> <RowDefinition Height="70"></RowDefinition> <RowDefinition Height="70"></RowDefinition> <RowDefinition Height="70"></RowDefinition> <RowDefinition Height="70"></RowDefinition> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="50*"></ColumnDefinition> <ColumnDefinition Width="70*"></ColumnDefinition> <ColumnDefinition Width="30*"></ColumnDefinition> <ColumnDefinition Width="70*"></ColumnDefinition> <ColumnDefinition Width="70*"></ColumnDefinition> <ColumnDefinition Width="70*"></ColumnDefinition> <ColumnDefinition Width="100*"></ColumnDefinition> </Grid.ColumnDefinitions> <TextBlock Text="EW" Style="{StaticResource PhoneTextNormalStyle}" Grid.Row="0" Grid.Column="4" HorizontalAlignment="Center" /> <TextBlock Text="Place" Style="{StaticResource PhoneTextNormalStyle}" Grid.Row="0" Grid.Column="5" HorizontalAlignment="Center" /> <TextBlock Text="Result" Style="{StaticResource PhoneTextNormalStyle}" Grid.Row="0" Grid.Column="6" HorizontalAlignment="Center" /> <my:OddsRow Grid.Row="1" Grid.ColumnSpan="7" Row="1"/> <my:OddsRow Grid.Row="2" Grid.ColumnSpan="7" Row="2"/> <my:OddsRow Grid.Row="3" Grid.ColumnSpan="7" Row="3"/> <my:OddsRow Grid.Row="4" Grid.ColumnSpan="7" Row="4"/> <my:OddsRow Grid.Row="5" Grid.ColumnSpan="7" Row="5"/> <my:OddsRow Grid.Row="6" Grid.ColumnSpan="7" Row="6"/> </Grid> <Grid x:Name="ControlsGrid" Grid.Row="1"> <Button x:Name="AddRowButton" Background="#BFFFFFFF" BorderBrush="#BFFFFFFF" Foreground="Black" Content="Add Row" FontSize="16" Click="AddRowButton_Click" Height="70" /> </Grid> </Grid> </ScrollViewer> </Grid> </Grid> </Grid> </phone:PhoneApplicationPage> Separately the ComboBox works, and also the code for the OddsRow works as expected... separately. When combined it doesn't display the items. OddsRow.xaml.cs public partial class OddsRow : UserControl { private int m_Row; public OddsRow() { InitializeComponent(); } public int Row { get { return m_Row; } set { m_Row = value; RowNumber.Text = m_Row + " - "; } } }

    Read the article

  • Select list auto update on any kind of change?

    - by Tom Irons
    I have a jQuery that when you click on a select option it will show the next one, but you have to click, you cant just use the down arrow or "tab" to the next option. I am wondering what options do I have to make this work? Here is my jQuery: function typefunction() { var itemTypes = jQuery('#type'); var select = this.value; itemTypes.change(function () { if ($(this).val() == '1-Hand') { $('.1-Hand').show(); $('.2-Hand').hide(); $('.off').hide(); $('.Armor').hide(); } else $('.1-Hand').hide(); if ($(this).val() == '2-Hand') { $('.2-Hand').show(); $('.1-Hand').hide(); $('.off').hide(); $('.Armor').hide(); } else $('.2-Hand').hide(); if ($(this).val() == 'Armor') { $('.Armor').show(); $('.2-Hand').hide(); $('.off').hide(); $('.1-Hand').hide(); } else $('.Armor').hide(); if ($(this).val() == 'Off-Hand') { $('.Off').show(); $('.2-Hand').hide(); $('.1-Hand').hide(); $('.Armor').hide(); } else $('.Off').hide(); if ($(this).val() == '1-Hand') { $('.one-hand-dps').show(); $('.item-armor').hide(); $('.two-hand-dps').hide(); } else $('.one-hand-dps').hide(); if ($(this).val() == '2-Hand') { $('.two-hand-dps').show(); $('.one-hand-dps').hide(); $('.item-armor').hide(); } else $('.two-hand-dps').hide(); if ($(this).val() == 'Armor') { $('.item-armor').show(); $('.one-hand-dps').hide(); $('.two-hand-dps').hide(); } else $('.item-armor').hide(); }); } And the HTML: <div class="input-group item"> <span class="input-group-addon">Type</span> <select id="type" name="type" class="form-control" onclick="typefunction(); itemstats(); Armor(); OffHand(); TwoHand();"> <option value="Any Type">Any Type</option> <option value="1-Hand">1-Hand</option> <option value="2-Hand">2-Hand</option> <option value="Armor">Armor</option> <option value="Off-Hand">Off-Hand</option> </select> </div> <div class="input-group item"> <span class="1-Hand input-group-addon" style="display: none;">Sub-Type</span> <select class="1-Hand form-control" name="sub[1]" style="display: none;"> <option value="All 1-Hand Item Types">All 1-Hand Item Types</option> <option>Axe</option> <option>Ceremonial Knife</option> <option>Hand Crossbow</option> <option>Dagger</option> <option>Fist Weapon</option> <option>Mace</option> <option>Mighty Weapon</option> <option>Spear</option> <option>Sword</option> <option>Wand</option> </select> </div> <div class="input-group"> <span class="2-Hand input-group-addon" style="display: none; ">Sub-Type</span> <select class="2-Hand form-control" name="sub[2]" style="display: none;"> <option>All 2-Hand Item Types</option> <option>Two-Handed Axe</option> <option>Bow</option> <option>Diabo</option> <option>Crossbow</option> <option>Two-Handed Mace</option> <option>Two-Handed Mighty Weapon</option> <option>Polearm</option> <option>Staff</option> <option>Two-Handed Sword</option> </select> </div> <div class="input-group"> <span class="Armor input-group-addon" style="display: none;">Sub-Type</span> <select class="Armor form-control" name="sub[3]" style="display:none;"> <option>All Armor Item Types</option> <option>Amulet</option> <option>Belt</option> <option>Boots</option> <option>Bracers</option> <option>Chest Armor</option> <option>Cloak</option> <option>Gloves</option> <option>Helm</option> <option>Pants</option> <option>Mighty Belt</option> <option>Ring</option> <option>Shoulders</option> <option>Spirit Stone</option> <option>Voodoo Mask</option> <option>Wizard Hat</option> </select> </div> <div class="input-group"> <span class="Off input-group-addon" style="display: none;">Sub-Type</span> <select class="Off form-control" name="sub[4]" style="display:none;"> <option>All Off-Hand Item Types</option> <option>Mojo</option> <option>Source</option> <option>Quiver</option> <option>Shield</option> </select> </div>

    Read the article

  • How to display data stored in core data in a table view?

    - by Dipanjan Dutta
    Hello All, I have developed a core data model for my application. I need to display the saved data into a table view. For my app I have selected split view controller. I am writing down my codes below. Please help me in this regard and write me the code that needs to be added. This is very important as my continuation in my company depends on this. #import "RootViewController.h" #import "DetailViewController.h" #import "AddViewController.h" #import "EmployeeDetailsAppDelegate.h" /* This template does not ensure user interface consistency during editing operations in the table view. You must implement appropriate methods to provide the user experience you require. */ @interface RootViewController () - (void)configureCell:(UITableViewCell *)cell atIndexPath:(NSIndexPath *)indexPath; @end @implementation RootViewController @synthesize detailViewController, fetchedResultsController, managedObjectContext, results, empName; #pragma mark - #pragma mark View lifecycle - (void)viewDidLoad { results = [[NSMutableDictionary alloc]init]; [results setObject:empName.text forKey:@"EmployeeName"]; [self.tableView reloadData]; [super viewDidLoad]; } /* - (void)viewWillAppear:(BOOL)animated { [super viewWillAppear:animated]; } */ /* - (void)viewDidAppear:(BOOL)animated { [super viewDidAppear:animated]; } */ /* - (void)viewWillDisappear:(BOOL)animated { [super viewWillDisappear:animated]; } */ /* - (void)viewDidDisappear:(BOOL)animated { [super viewDidDisappear:animated]; } */ - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { // Ensure that the view controller supports rotation and that the split view can therefore show in both portrait and landscape. return YES; } - (void)configureCell:(UITableViewCell *)cell atIndexPath:(NSIndexPath *)indexPath { NSManagedObject *managedObject = [self.fetchedResultsController objectAtIndexPath:indexPath]; cell.textLabel.text = [[managedObject valueForKey:@"EmployeeName"] description]; } #pragma mark - #pragma mark Add a new object - (void)insertNewObject:(id)sender { AddViewController *add = [[AddViewController alloc]initWithNibName:@"AddViewController" bundle:nil]; self.modalPresentationStyle = UIModalPresentationFormSheet; add.wantsFullScreenLayout = NO; [self presentModalViewController:add animated:YES]; [add release]; } #pragma mark - #pragma mark Table view data source - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { return 1; } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return 1; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier] autorelease]; } // Configure the cell. NSManagedObject *managedObject = [self.fetchedResultsController objectAtIndexPath:indexPath]; cell.textLabel.text = [[managedObject valueForKey:@"EmployeeName"] description]; return cell; } - (void)tableView:(UITableView *)tableView commitEditingStyle:(UITableViewCellEditingStyle)editingStyle forRowAtIndexPath:(NSIndexPath *)indexPath { if (editingStyle == UITableViewCellEditingStyleDelete) { // Delete the managed object. NSManagedObject *objectToDelete = [self.fetchedResultsController objectAtIndexPath:indexPath]; if (self.detailViewController.detailItem == objectToDelete) { self.detailViewController.detailItem = nil; } NSManagedObjectContext *context = [self.fetchedResultsController managedObjectContext]; [context deleteObject:objectToDelete]; NSError *error; if (![context save:&error]) { /* Replace this implementation with code to handle the error appropriately. abort() causes the application to generate a crash log and terminate. You should not use this function in a shipping application, although it may be useful during development. If it is not possible to recover from the error, display an alert panel that instructs the user to quit the application by pressing the Home button. */ NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); } } } - (BOOL)tableView:(UITableView *)tableView canMoveRowAtIndexPath:(NSIndexPath *)indexPath { // The table view should not be re-orderable. return NO; } #pragma mark - #pragma mark Table view delegate - (void)tableView:(UITableView *)aTableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { // Set the detail item in the detail view controller. NSManagedObject *selectedObject = [self.fetchedResultsController objectAtIndexPath:indexPath]; self.detailViewController.detailItem = selectedObject; } #pragma mark - #pragma mark Fetched results controller - (NSFetchedResultsController *)fetchedResultsController { if (fetchedResultsController != nil) { return fetchedResultsController; } /* Set up the fetched results controller. */ // Create the fetch request for the entity. NSFetchRequest *fetchRequest = [[NSFetchRequest alloc] init]; // Edit the entity name as appropriate. NSEntityDescription *entity = [NSEntityDescription entityForName:@"Details" inManagedObjectContext:managedObjectContext]; [fetchRequest setEntity:entity]; // Set the batch size to a suitable number. [fetchRequest setFetchBatchSize:20]; // Edit the sort key as appropriate. NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:@"EmployeeName" ascending:NO]; NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil]; [fetchRequest setSortDescriptors:sortDescriptors]; // Edit the section name key path and cache name if appropriate. // nil for section name key path means "no sections". NSFetchedResultsController *aFetchedResultsController = [[NSFetchedResultsController alloc] initWithFetchRequest:fetchRequest managedObjectContext:managedObjectContext sectionNameKeyPath:nil cacheName:@"Root"]; aFetchedResultsController.delegate = self; self.fetchedResultsController = aFetchedResultsController; [aFetchedResultsController release]; [fetchRequest release]; [sortDescriptor release]; [sortDescriptors release]; return fetchedResultsController; } #pragma mark - #pragma mark Fetched results controller delegate - (void)controllerWillChangeContent:(NSFetchedResultsController *)controller { [self.tableView beginUpdates]; } - (void)controller:(NSFetchedResultsController *)controller didChangeSection:(id <NSFetchedResultsSectionInfo>)sectionInfo atIndex:(NSUInteger)sectionIndex forChangeType:(NSFetchedResultsChangeType)type { switch(type) { case NSFetchedResultsChangeInsert: [self.tableView insertSections:[NSIndexSet indexSetWithIndex:sectionIndex] withRowAnimation:UITableViewRowAnimationFade]; break; case NSFetchedResultsChangeDelete: [self.tableView deleteSections:[NSIndexSet indexSetWithIndex:sectionIndex] withRowAnimation:UITableViewRowAnimationFade]; break; } } - (void)controller:(NSFetchedResultsController *)controller didChangeObject:(id)anObject atIndexPath:(NSIndexPath *)indexPath forChangeType:(NSFetchedResultsChangeType)type newIndexPath:(NSIndexPath *)newIndexPath { UITableView *tableView = self.tableView; switch(type) { case NSFetchedResultsChangeInsert: [tableView insertRowsAtIndexPaths:[NSArray arrayWithObject:newIndexPath] withRowAnimation:UITableViewRowAnimationFade]; break; case NSFetchedResultsChangeDelete: [tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationFade]; break; case NSFetchedResultsChangeUpdate: [self configureCell:[tableView cellForRowAtIndexPath:indexPath] atIndexPath:indexPath]; break; case NSFetchedResultsChangeMove: [tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationFade]; [tableView insertRowsAtIndexPaths:[NSArray arrayWithObject:newIndexPath]withRowAnimation:UITableViewRowAnimationFade]; break; } } - (void)controllerDidChangeContent:(NSFetchedResultsController *)controller { [self.tableView endUpdates]; } #pragma mark - #pragma mark Memory management - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Relinquish ownership any cached data, images, etc. that aren't in use. } - (void)viewDidUnload { // Relinquish ownership of anything that can be recreated in viewDidLoad or on demand. // For example: self.myOutlet = nil; } - (void)dealloc { [detailViewController release]; [fetchedResultsController release]; [managedObjectContext release]; [super dealloc]; } @end // // AddViewController.m // EmployeeDetails // // Created by Dipanjan on 15/02/11. // Copyright 2011 __MyCompanyName__. All rights reserved. // #import "AddViewController.h" #import "EmployeeDetailsAppDelegate.h" #import "RootViewController.h" @implementation AddViewController @synthesize empName; @synthesize empID; @synthesize empDepartment; @synthesize backButton; // The designated initializer. Override if you create the controller programmatically and want to perform customization that is not appropriate for viewDidLoad. /* - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]; if (self) { // Custom initialization. } return self; } */ /* // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { [super viewDidLoad]; } */ -(void)saveDetails{ EmployeeDetailsAppDelegate *appDelegate = [[UIApplication sharedApplication]delegate]; NSManagedObjectContext *context = [appDelegate managedObjectContext]; NSManagedObject *newDetails; newDetails = [NSEntityDescription insertNewObjectForEntityForName:@"Details" inManagedObjectContext:context]; [newDetails setValue:empID.text forKey:@"EmployeeID"]; [newDetails setValue:empName.text forKey:@"EmployeeName"]; [newDetails setValue:empDepartment.text forKey:@"EmployeeDepartment"]; empID.text = @""; empName.text = @""; empDepartment.text = @""; NSLog(@"%@........----->>>...", newDetails); NSError *error; [context save:&error]; [self dismissModalViewControllerAnimated:YES]; } -(void)findDetails { EmployeeDetailsAppDelegate *appDelegate = [[UIApplication sharedApplication]delegate]; NSManagedObjectContext *context = [appDelegate managedObjectContext]; NSEntityDescription *entityDesc = [NSEntityDescription entityForName:@"Details" inManagedObjectContext:context]; NSFetchRequest *request = [[NSFetchRequest alloc]init]; [request setEntity:entityDesc]; NSPredicate *pred = [NSPredicate predicateWithFormat:@"(EmployeeName = %@)", empName.text]; [request setPredicate:pred]; NSManagedObject *matches = nil; NSError *error; NSArray *objects = [context executeFetchRequest:request error:&error]; if ([objects count] == 0) { } else { matches = [objects objectAtIndex:0]; empID.text = [matches valueForKey:@"EmployeeID"]; empDepartment.text = [matches valueForKey:@"EmployeeDepartment"]; } [request release]; [self dismissModalViewControllerAnimated:YES]; } - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { // Overriden to allow any orientation. return YES; } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc. that aren't in use. } - (void)viewDidUnload { self.empName = nil; self.empID = nil; self.empDepartment = nil; [super viewDidUnload]; // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } - (void)dealloc { [empID release]; [empName release]; [empDepartment release]; [super dealloc]; } @end Please let me know the answer as soon as possible. Thank you. Regards, Dipanjan

    Read the article

  • How to find an entry-level job after you already have a graduate degree?

    - by Uri
    Note: I asked this question in early 2009. A couple of months later, I found a great job. I've previously updated this question with some tips for whoever ends up in a similar situation, and now cleaned it up a little for the benefit of the fresh batch of graduates. Original post: In my early 20s I abandoned a great C++ development career path in a major company to go to graduate school and get a research masters (3 years). I did another year in industrial research, and then moved to the US to attend graduate school again, getting another masters and a Ph.D in software engineering from a top school (another 6 years down the drain). I was coding the whole way throughout my degrees (core Java and Eclipse plug-ins) and working on research related to software engineering (usability of APIs). I ended up graduating the year of the recession, with a son on the way and the prospects of no healthcare. Academic jobs and industrial research jobs are quite scarce. Initially, I was naive, thinking that with my background, I could easily find a coding job. Big mistake. It turns out that I'm in a complicated position. Entry level positions are usually offered to college undergraduates. I attended my school's career fairs, but you could immediately see signs of Ph.D. aversion and overqualification issues. Some of the recruiters I spoke with explicitly told me that they wanted 20 year olds with clean slates, and some were looking for interns since they are in various forms of hiring freezes. I managed to get a couple of interviews from these career fairs and through recruiters. However, since I've been out of school for a long time and programming primarily in Java, I am also no longer proficient in C/C++ and the usual range of college-level interview questions that everyone uses. I had no problems with this when I was 19 and interviewing for my first job since a lot of what you do in C is manipulate pointers and I was coding C++ for fun and for school. Later I was routinely doing pointer manipulation on the job, and during my first masters taught college courses with data structures and C++. But even though I remember many properties of C++ well, it's been close to ten years since I regularly used C++ and pointers. As a Java developer I rarely had to work at this level, but experience in OOD and in writing good maintainable code is meaningless for C++ interviews. Reading books as a refresh and looking at sample code did not do the trick. I also looked at mid-to-senior level Java positions, but most of them focused on J2EE APIs rather than on core Java and required a certain number of years in industrial positions. Coding research tools and prior C++ experience doesn't count. So that sends me back to entry-level jobs that are posted through job-boards, and these are not common (mostly they are Monster junk), and small companies are even less likely to answer a Ph.D. compared to the giants who participate in top-10 career fairs. Even worse, in many companies initial screening is done by HR folks who really don't want to deal with anything anomalous like a Ph.D. Any tips on how I should approach this intractable position? For example, what should I write in cover letters? Note that while immigration is not an issue for me, I cannot go freelance as I need the benefits (and in particular group health insurance). During my studies I had no time to contribute to open-source projects or maintain a popular blog, so even if I invested in that now there would be no immediate benefit. Updates: In the two months after posting this I received several offers to work as a core Java developer in the financial industry and accepted one from a firm where I am working to this day. For those who find themselves in similar situations, here are my tips: Give up on trying to find an entry level positions. You can't undo time. Accept the fact that there is Ph.D. discrimination in the job market (some might say rightfully so). It is legal to discriminate based on education. No point fighting it. The most important tip is to focus on the language you are comfortable with. The sad truth about programming in a particular language is that it is not like riding a bike. If you haven't used a language in the last few years, and can't actually apply it routinely (not just as a refresher) before you start your search, it is going to be very difficult to do well in an interview. Now that I'm interviewing others, I routinely see it in folks with a mixed C++/Java background. We maintain "a shadow" of the old language but end up with a weird mix that makes it hard to interview on either. Entry-level folks are at an advantage here since they usually have one language. Memory can help you do great in a screening interview, but without recent day-to-day experience, code tests will be difficult. Despite the supposed relation, core Java programming and J2EE programming are two different things with different skillsets. If you come from academia, you likely have very little J2EE experience and may find it hard to get accepted for a J2EE job. J2EE jobs seem to have a larger list of acronyms in their requirements. In addition, from interviewing J2EE developers it seems that for many there is a focus on mastering specific APIs and architectures, whereas core Java development tends to be secondary. In the same way that I can no longer manipulate pointers well, a J2EE developer may have difficulties doing low level Java manipulation. This puts you at a relative advantage in competing for core Java jobs! If you are able to work for startups (in terms of family life and stability) or migrate to startup-rich areas such as the west coast, you can find many exciting opportunities where advanced degrees are a benefit. I've since been approached by several startups, although I had to decline. Work through a recruiter if possible. They have direct contacts with the hiring parties, allowing you to "stand out". It is better to get a clear yes/no confirmation from a recruiter on whether a company might be interested in interviewing you, than it is to send your resume and hope that someone will ever see it. Recruiters are also a great way of bypassing HR. However, also beware of recruiters. They have a vested interest and will go to various shady practices and pressure tactics. To find a good recruiter, talk to a friend who declined a job offer he got through a recruiter. A good recruiter, to me, is measured in how they handle that. Interview for the jobs that require your core strength. If you're rusty or entirely unfamiliar with a technology around which the job revolves, you're probably not a good match. Yes, you probably have the talent to master them, but most companies would want "instant gratification". I got my offers from companies that wanted core Java developer. I didn't do well on places that wanted advance C++ because I am too rusty and not up to date on recent libraries. I also didn't hear from companies that wanted lots of J2EE experience, and that's ok. Finding companies that want core Java without web is harder, but exists in specific industries (e.g., finance, defense). This requires a lot more legwork in terms of search, but these jobs do exist. There are different interview styles. Some companies focus on puzzles, some companies focus on algorithms, and some companies focus on design and coding skills. I had the most success in places where the questions were the most related to the function I would have been performing. Pick companies accordingly as well.

    Read the article

  • Maze not generating properly. Out of bounds exception. need quick fix

    - by Dan Joseph Porcioncula
    My maze generator seems to have a problem. I am trying to generate something like the maze from http://mazeworks.com/mazegen/mazetut/index.htm . My program displays this http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s320x320/374060_426350204045347_100000111130260_1880768_1572427285_n.jpg and the error Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: -1 at Grid.genRand(Grid.java:73) at Grid.main(Grid.java:35) How do I fix my generator program? import java.awt.*; import java.awt.Color; import java.awt.Component; import java.awt.Graphics; import javax.swing.*; import java.util.ArrayList; public class Grid extends Canvas { Cell[][] maze; int size; int pathSize; double width, height; ArrayList<int[]> coordinates = new ArrayList<int[]>(); public Grid(int size, int h, int w) { this.size = size; maze = new Cell[size][size]; for(int i = 0; i<size; i++){ for(int a =0; a<size; a++){ maze[i][a] = new Cell(); } } setPreferredSize(new Dimension(h, w)); } public static void main(String[] args) { JFrame y = new JFrame(); y.setLayout(new BorderLayout()); Grid f = new Grid(25, 400, 400); y.add(f, BorderLayout.CENTER); y.setSize(450, 450); y.setVisible(true); y.setDefaultCloseOperation(y.EXIT_ON_CLOSE); f.genRand(); f.repaint(); } public void push(int[] xy) { coordinates.add(xy); int i = coordinates.size(); coordinates.ensureCapacity(i++); } public int[] pop() { int[] x = coordinates.get((coordinates.size())-1); coordinates.remove((coordinates.size())-1); return x; } public int[] top() { return coordinates.get((coordinates.size())-1); } public void genRand(){ // create a CellStack (LIFO) to hold a list of cell locations [x] // set TotalCells = number of cells in grid int TotalCells = size*size; // choose a cell at random and call it CurrentCell int m = randomInt(size); int n = randomInt(size); Cell curCel = maze[m][n]; // set VisitedCells = 1 int visCel = 1,d=0; int[] q; int h,o = 0,p = 0; // while VisitedCells < TotalCells while( visCel < TotalCells){ // find all neighbors of CurrentCell with all walls intact if(maze[m-1][n].countWalls() == 4){d++;} if(maze[m+1][n].countWalls() == 4){d++;} if(maze[m][n-1].countWalls() == 4){d++;} if(maze[m][n+1].countWalls() == 4){d++;} // if one or more found if(d!=0){ Point[] ls = new Point[4]; ls[0] = new Point(m-1,n); ls[1] = new Point(m+1,n); ls[2] = new Point(m,n-1); ls[3] = new Point(m,n+1); // knock down the wall between it and CurrentCell h = randomInt(3); switch(h){ case 0: o = (int)(ls[0].getX()); p = (int)(ls[0].getY()); curCel.destroyWall(2); maze[o][p].destroyWall(1); break; case 1: o = (int)(ls[1].getX()); p = (int)(ls[1].getY()); curCel.destroyWall(1); maze[o][p].destroyWall(2); break; case 2: o = (int)(ls[2].getX()); p = (int)(ls[2].getY()); curCel.destroyWall(3); maze[o][p].destroyWall(0); break; case 3: o = (int)(ls[3].getX()); p = (int)(ls[3].getY()); curCel.destroyWall(0); maze[o][p].destroyWall(3); break; } // push CurrentCell location on the CellStack push(new int[] {m,n}); // make the new cell CurrentCell m = o; n = p; curCel = maze[m][n]; // add 1 to VisitedCells visCel++; } // else else{ // pop the most recent cell entry off the CellStack q = pop(); m = q[0]; n = q[1]; curCel = maze[m][n]; // make it CurrentCell // endIf } // endWhile } } public int randomInt(int s) { return (int)(s* Math.random());} public void paint(Graphics g) { int k, j; width = getSize().width; height = getSize().height; double htOfRow = height / (size); double wdOfRow = width / (size); //checks verticals - destroys east border of cell for (k = 0; k < size; k++) { for (j = 0; j < size; j++) { if(maze[k][j].checkWall(2)){ g.drawLine((int) (k * wdOfRow), (int) (j * htOfRow), (int) (k * wdOfRow), (int) ((j+1) * htOfRow)); }} } //checks horizontal - destroys north border of cell for (k = 0; k < size; k++) { for (j = 0; j < size; j++) { if(maze[k][j].checkWall(3)){ g.drawLine((int) (k * wdOfRow), (int) (j * htOfRow), (int) ((k+1) * wdOfRow), (int) (j * htOfRow)); }} } } } class Cell { private final static int NORTH = 0; private final static int EAST = 1; private final static int WEST = 2; private final static int SOUTH = 3; private final static int NO = 4; private final static int START = 1; private final static int END = 2; boolean[] wall = new boolean[4]; boolean[] border = new boolean[4]; boolean[] backtrack = new boolean[4]; boolean[] solution = new boolean[4]; private boolean isVisited = false; private int Key = 0; public Cell(){ for(int i=0;i<4;i++){wall[i] = true;} } public int countWalls(){ int i, k =0; for(i=0; i<4; i++) { if (wall[i] == true) {k++;} } return k;} public boolean checkWall(int x){ switch(x){ case 0: return wall[0]; case 1: return wall[1]; case 2: return wall[2]; case 3: return wall[3]; } return true; } public void destroyWall(int x){ switch(x){ case 0: wall[0] = false; break; case 1: wall[1] = false; break; case 2: wall[2] = false; break; case 3: wall[3] = false; break; } } public void setStart(int i){Key = i;} public int getKey(){return Key;} public boolean checkVisit(){return isVisited;} public void visitCell(){isVisited = true;} }

    Read the article

  • Odd behavior when recursively building a return type for variadic functions

    - by Dennis Zickefoose
    This is probably going to be a really simple explanation, but I'm going to give as much backstory as possible in case I'm wrong. Advanced apologies for being so verbose. I'm using gcc4.5, and I realize the c++0x support is still somewhat experimental, but I'm going to act on the assumption that there's a non-bug related reason for the behavior I'm seeing. I'm experimenting with variadic function templates. The end goal was to build a cons-list out of std::pair. It wasn't meant to be a custom type, just a string of pair objects. The function that constructs the list would have to be in some way recursive, with the ultimate return value being dependent on the result of the recursive calls. As an added twist, successive parameters are added together before being inserted into the list. So if I pass [1, 2, 3, 4, 5, 6] the end result should be {1+2, {3+4, 5+6}}. My initial attempt was fairly naive. A function, Build, with two overloads. One took two identical parameters and simply returned their sum. The other took two parameters and a parameter pack. The return value was a pair consisting of the sum of the two set parameters, and the recursive call. In retrospect, this was obviously a flawed strategy, because the function isn't declared when I try to figure out its return type, so it has no choice but to resolve to the non-recursive version. That I understand. Where I got confused was the second iteration. I decided to make those functions static members of a template class. The function calls themselves are not parameterized, but instead the entire class is. My assumption was that when the recursive function attempts to generate its return type, it would instantiate a whole new version of the structure with its own static function, and everything would work itself out. The result was: "error: no matching function for call to BuildStruct<double, double, char, char>::Go(const char&, const char&)" The offending code: static auto Go(const Type& t0, const Type& t1, const Types&... rest) -> std::pair<Type, decltype(BuildStruct<Types...>::Go(rest...))> My confusion comes from the fact that the parameters to BuildStruct should always be the same types as the arguments sent to BuildStruct::Go, but in the error code Go is missing the initial two double parameters. What am I missing here? If my initial assumption about how the static functions would be chosen was incorrect, why is it trying to call the wrong function rather than just not finding a function at all? It seems to just be mixing types willy-nilly, and I just can't come up with an explanation as to why. If I add additional parameters to the initial call, it always burrows down to that last step before failing, so presumably the recursion itself is at least partially working. This is in direct contrast to the initial attempt, which always failed to find a function call right away. Ultimately, I've gotten past the problem, with a fairly elegant solution that hardly resembles either of the first two attempts. So I know how to do what I want to do. I'm looking for an explanation for the failure I saw. Full code to follow since I'm sure my verbal description was insufficient. First some boilerplate, if you feel compelled to execute the code and see it for yourself. Then the initial attempt, which failed reasonably, then the second attempt, which did not. #include <iostream> using std::cout; using std::endl; #include <utility> template<typename T1, typename T2> std::ostream& operator <<(std::ostream& str, const std::pair<T1, T2>& p) { return str << "[" << p.first << ", " << p.second << "]"; } //Insert code here int main() { Execute(5, 6, 4.3, 2.2, 'c', 'd'); Execute(5, 6, 4.3, 2.2); Execute(5, 6); return 0; } Non-struct solution: template<typename Type> Type BuildFunction(const Type& t0, const Type& t1) { return t0 + t1; } template<typename Type, typename... Rest> auto BuildFunction(const Type& t0, const Type& t1, const Rest&... rest) -> std::pair<Type, decltype(BuildFunction(rest...))> { return std::pair<Type, decltype(BuildFunction(rest...))> (t0 + t1, BuildFunction(rest...)); } template<typename... Types> void Execute(const Types&... t) { cout << BuildFunction(t...) << endl; } Resulting errors: test.cpp: In function 'void Execute(const Types& ...) [with Types = {int, int, double, double, char, char}]': test.cpp:33:35: instantiated from here test.cpp:28:3: error: no matching function for call to 'BuildFunction(const int&, const int&, const double&, const double&, const char&, const char&)' Struct solution: template<typename... Types> struct BuildStruct; template<typename Type> struct BuildStruct<Type, Type> { static Type Go(const Type& t0, const Type& t1) { return t0 + t1; } }; template<typename Type, typename... Types> struct BuildStruct<Type, Type, Types...> { static auto Go(const Type& t0, const Type& t1, const Types&... rest) -> std::pair<Type, decltype(BuildStruct<Types...>::Go(rest...))> { return std::pair<Type, decltype(BuildStruct<Types...>::Go(rest...))> (t0 + t1, BuildStruct<Types...>::Go(rest...)); } }; template<typename... Types> void Execute(const Types&... t) { cout << BuildStruct<Types...>::Go(t...) << endl; } Resulting errors: test.cpp: In instantiation of 'BuildStruct<int, int, double, double, char, char>': test.cpp:33:3: instantiated from 'void Execute(const Types& ...) [with Types = {int, int, double, double, char, char}]' test.cpp:38:41: instantiated from here test.cpp:24:15: error: no matching function for call to 'BuildStruct<double, double, char, char>::Go(const char&, const char&)' test.cpp:24:15: note: candidate is: static std::pair<Type, decltype (BuildStruct<Types ...>::Go(BuildStruct<Type, Type, Types ...>::Go::rest ...))> BuildStruct<Type, Type, Types ...>::Go(const Type&, const Type&, const Types& ...) [with Type = double, Types = {char, char}, decltype (BuildStruct<Types ...>::Go(BuildStruct<Type, Type, Types ...>::Go::rest ...)) = char] test.cpp: In function 'void Execute(const Types& ...) [with Types = {int, int, double, double, char, char}]': test.cpp:38:41: instantiated from here test.cpp:33:3: error: 'Go' is not a member of 'BuildStruct<int, int, double, double, char, char>'

    Read the article

  • Implementing a robust async stream reader for a console

    - by Jon
    I recently provided an answer to this question: C# - Realtime console output redirection. As often happens, explaining stuff (here "stuff" was how I tackled a similar problem) leads you to greater understanding and/or, as is the case here, "oops" moments. I realized that my solution, as implemented, has a bug. The bug has little practical importance, but it has an extremely large importance to me as a developer: I can't rest easy knowing that my code has the potential to blow up. Squashing the bug is the purpose of this question. I apologize for the long intro, so let's get dirty. I wanted to build a class that allows me to receive input from a Stream in an event-based manner. The stream, in my scenario, is guaranteed to be a FileStream and there is also an associated StreamReader already present to leverage. The public interface of the class is this: public class MyStreamManager { public event EventHandler<ConsoleOutputReadEventArgs> StandardOutputRead; public void StartSendingEvents(); public void StopSendingEvents(); } Obviously this specific scenario has to do with a console's standard output. StartSendingEvents and StopSendingEvents do what they advertise; for the purposes of this discussion, we can assume that events are always being sent without loss of generality. The class uses these two fields internally: protected readonly StringBuilder inputAccumulator = new StringBuilder(); protected readonly byte[] buffer = new byte[256]; The functionality of the class is implemented in the methods below. To get the ball rolling: public void StartSendingEvents(); { this.stopAutomation = false; this.BeginReadAsync(); } To read data out of the Stream without blocking, and also without requiring a carriage return char, BeginRead is called: protected void BeginReadAsync() { if (!this.stopAutomation) { this.StandardOutput.BaseStream.BeginRead( this.buffer, 0, this.buffer.Length, this.ReadHappened, null); } } The challenging part: BeginRead requires using a buffer. This means that when reading from the stream, it is possible that the bytes available to read ("incoming chunk") are larger than the buffer. Since we are only handing off data from the stream to a consumer, and that consumer may well have inside knowledge about the size and/or format of these chunks, I want to call event subscribers exactly once for each chunk. Otherwise the abstraction breaks down and the subscribers have to buffer the incoming data and reconstruct the chunks themselves using said knowledge. This is much less convenient to the calling code, and detracts from the usefulness of my class. Edit: There are comments below correctly stating that since the data is coming from a stream, there is absolutely nothing that the receiver can infer about the structure of the data unless it is fully prepared to parse it. What I am trying to do here is leverage the "flush the output" "structure" that the owner of the console imparts while writing on it. I am prepared to assume (better: allow my caller to have the option to assume) that the OS will pass me the data written between two flushes of the stream in exactly one piece. To this end, if the buffer is full after EndRead, we don't send its contents to subscribers immediately but instead append them to a StringBuilder. The contents of the StringBuilder are only sent back whenever there is no more to read from the stream (thus preserving the chunks). private void ReadHappened(IAsyncResult asyncResult) { var bytesRead = this.StandardOutput.BaseStream.EndRead(asyncResult); if (bytesRead == 0) { this.OnAutomationStopped(); return; } var input = this.StandardOutput.CurrentEncoding.GetString( this.buffer, 0, bytesRead); this.inputAccumulator.Append(input); if (bytesRead < this.buffer.Length) { this.OnInputRead(); // only send back if we 're sure we got it all } this.BeginReadAsync(); // continue "looping" with BeginRead } After any read which is not enough to fill the buffer, all accumulated data is sent to the subscribers: private void OnInputRead() { var handler = this.StandardOutputRead; if (handler == null) { return; } handler(this, new ConsoleOutputReadEventArgs(this.inputAccumulator.ToString())); this.inputAccumulator.Clear(); } (I know that as long as there are no subscribers the data gets accumulated forever. This is a deliberate decision). The good This scheme works almost perfectly: Async functionality without spawning any threads Very convenient to the calling code (just subscribe to an event) Maintains the "chunkiness" of the data; this allows the calling code to use inside knowledge of the data without doing any extra work Is almost agnostic to the buffer size (it will work correctly with any size buffer irrespective of the data being read) The bad That last almost is a very big one. Consider what happens when there is an incoming chunk with length exactly equal to the size of the buffer. The chunk will be read and buffered, but the event will not be triggered. This will be followed up by a BeginRead that expects to find more data belonging to the current chunk in order to send it back all in one piece, but... there will be no more data in the stream. In fact, as long as data is put into the stream in chunks with length exactly equal to the buffer size, the data will be buffered and the event will never be triggered. This scenario may be highly unlikely to occur in practice, especially since we can pick any number for the buffer size, but the problem is there. Solution? Unfortunately, after checking the available methods on FileStream and StreamReader, I can't find anything which lets me peek into the stream while also allowing async methods to be used on it. One "solution" would be to have a thread wait on a ManualResetEvent after the "buffer filled" condition is detected. If the event is not signaled (by the async callback) in a small amount of time, then more data from the stream will not be forthcoming and the data accumulated so far should be sent to subscribers. However, this introduces the need for another thread, requires thread synchronization, and is plain inelegant. Specifying a timeout for BeginRead would also suffice (call back into my code every now and then so I can check if there's data to be sent back; most of the time there will not be anything to do, so I expect the performance hit to be negligible). But it looks like timeouts are not supported in FileStream. Since I imagine that async calls with timeouts are an option in bare Win32, another approach might be to PInvoke the hell out of the problem. But this is also undesirable as it will introduce complexity and simply be a pain to code. Is there an elegant way to get around the problem? Thanks for being patient enough to read all of this.

    Read the article

  • Ajax, Callback, postback and Sys.WebForms.PageRequestManager.getInstance().add_beginRequest

    - by user338262
    Hi, I have a user control which encapsulates a NumericUpDownExtender. This UserControl implements the interface ICallbackEventHandler, because I want that when a user changes the value of the textbox associated a custom event to be raised in the server. By the other hand each time an async postback is done I shoe a message of loading and disable the whole screen. This works perfect when something is changed in for example an UpdatePanel through this lines of code: Sys.WebForms.PageRequestManager.getInstance().add_beginRequest( function (sender, args) { var modalPopupBehavior = $find('programmaticSavingLoadingModalPopupBehavior'); modalPopupBehavior.show(); } ); The UserControl is placed inside a detailsview which is inside an UpdatePanel in an aspx. When the custom event is raised I want another textbox in the aspx to change its value. So far, When I click on the UpDownExtender, it goes correctly to the server and raises the custom event, and the new value of the textbox is assigned in the server. but it is not changed in the browser. I suspect that the problem is the callback, since I have the same architecture for a UserControl with an AutoCompleteExtender which implement IPostbackEventHandler and it works. Any clues how can I solve this here to make the UpDownNumericExtender user control to work like the AutComplete one? This is the code of the user control and the parent: using System; using System.Web.UI; using System.ComponentModel; using System.Text; namespace Corp.UserControls { [Themeable(true)] public partial class CustomNumericUpDown : CorpNumericUpDown, ICallbackEventHandler { protected void Page_PreRender(object sender, EventArgs e) { if (!Page.IsPostBack) { currentInstanceNumber = CorpAjaxControlToolkitUserControl.getNextInstanceNumber(); } registerControl(this.HFNumericUpDown.ClientID, currentInstanceNumber); string strCallServer = "NumericUpDownCallServer" + currentInstanceNumber.ToString(); // If this function is not written the callback to get the disponibilidadCliente doesn't work if (!Page.ClientScript.IsClientScriptBlockRegistered("ReceiveServerDataNumericUpDown")) { StringBuilder str = new StringBuilder(); str.Append("function ReceiveServerDataNumericUpDown(arg, context) {}").AppendLine(); Page.ClientScript.RegisterClientScriptBlock(typeof(CorpNumericUpDown), "ReceiveServerDataNumericUpDown", str.ToString(), true); } nudeNumericUpDownExtender.BehaviorID = "NumericUpDownEx" + currentInstanceNumber.ToString(); ClientScriptManager cm = Page.ClientScript; String cbReference = cm.GetCallbackEventReference(this, "arg", "ReceiveServerDataNumericUpDown", ""); String callbackScript = "function " + strCallServer + "(arg, context)" + Environment.NewLine + "{" + Environment.NewLine + cbReference + ";" + Environment.NewLine + "}" + Environment.NewLine; cm.RegisterClientScriptBlock(typeof(CustomNumericUpDown), strCallServer, callbackScript, true); base.Page_PreRender(sender,e); } [System.ComponentModel.Browsable(true)] [System.ComponentModel.Bindable(true)] public Int64 Value { get { return (string.IsNullOrEmpty(HFNumericUpDown.Value) ? Int64.Parse("1") : Int64.Parse(HFNumericUpDown.Value)); } set { HFNumericUpDown.Value = value.ToString(); //txtAutoCompleteCliente_AutoCompleteExtender.ContextKey = value.ToString(); // TODO: Change the text of the textbox } } [System.ComponentModel.Browsable(true)] [System.ComponentModel.Bindable(true)] [Description("The text of the numeric up down")] public string Text { get { return txtNumericUpDown.Text; } set { txtNumericUpDown.Text = value; } } public delegate void NumericUpDownChangedHandler(object sender, NumericUpDownChangedArgs e); public event NumericUpDownChangedHandler numericUpDownEvent; [System.ComponentModel.Browsable(true)] [System.ComponentModel.Bindable(true)] [System.ComponentModel.Description("Raised after the number has been increased or decreased")] protected virtual void OnNumericUpDownEvent(object sender, NumericUpDownChangedArgs e) { if (numericUpDownEvent != null) //check to see if anyone has attached to the event numericUpDownEvent(this, e); } #region ICallbackEventHandler Members public string GetCallbackResult() { return "";//throw new NotImplementedException(); } public void RaiseCallbackEvent(string eventArgument) { NumericUpDownChangedArgs nudca = new NumericUpDownChangedArgs(long.Parse(eventArgument)); OnNumericUpDownEvent(this, nudca); } #endregion } /// <summary> /// Class that adds the prestamoList to the event /// </summary> public class NumericUpDownChangedArgs : System.EventArgs { /// <summary> /// The current selected value. /// </summary> public long Value { get; private set; } public NumericUpDownChangedArgs(long value) { Value = value; } } } using System; using System.Collections.Generic; using System.Text; namespace Corp { /// <summary> /// Summary description for CorpAjaxControlToolkitUserControl /// </summary> public class CorpNumericUpDown : CorpAjaxControlToolkitUserControl { private Int16 _currentInstanceNumber; // This variable hold the instanceNumber assignated at first place. public short currentInstanceNumber { get { return _currentInstanceNumber; } set { _currentInstanceNumber = value; } } protected void Page_PreRender(object sender, EventArgs e) { const string strOnChange = "OnChange"; const string strCallServer = "NumericUpDownCallServer"; StringBuilder str = new StringBuilder(); foreach (KeyValuePair<String, Int16> control in controlsToRegister) { str.Append("function ").Append(strOnChange + control.Value).Append("(sender, eventArgs) ").AppendLine(); str.Append("{").AppendLine(); str.Append(" if (sender) {").AppendLine(); str.Append(" var hfield = document.getElementById('").Append(control.Key).Append("');").AppendLine(); str.Append(" if (hfield.value != eventArgs) {").AppendLine(); str.Append(" hfield.value = eventArgs;").AppendLine(); str.Append(" ").Append(strCallServer + control.Value).Append("(eventArgs, eventArgs);").AppendLine(); str.Append(" }").AppendLine(); str.Append(" }").AppendLine(); str.Append("}").AppendLine(); Page.ClientScript.RegisterClientScriptBlock(typeof(CorpNumericUpDown), Guid.NewGuid().ToString(), str.ToString(), true); } str = new StringBuilder(); foreach (KeyValuePair<String, Int16> control in controlsToRegister) { str.Append(" funcsPageLoad[funcsPageLoad.length] = function() { $find('NumericUpDownEx" + control.Value + "').add_currentChanged(").Append(strOnChange + control.Value).Append(");};").AppendLine(); str.Append(" funcsPageUnLoad[funcsPageUnLoad.length] = function() { $find('NumericUpDownEx" + control.Value + "').remove_currentChanged(").Append(strOnChange + control.Value).Append(");};").AppendLine(); } Page.ClientScript.RegisterClientScriptBlock(typeof(CorpNumericUpDown), Guid.NewGuid().ToString(), str.ToString(), true); } } } and to create the loading view I use this: //The beginRequest event is raised before the processing of an asynchronous postback starts and the postback is sent to the server. You can use this event to call custom script to set a request header or to start an animation that notifies the user that the postback is being processed. Sys.WebForms.PageRequestManager.getInstance().add_beginRequest( function (sender, args) { var modalPopupBehavior = $find('programmaticSavingLoadingModalPopupBehavior'); modalPopupBehavior.show(); } ); //The endRequest event is raised after an asynchronous postback is finished and control has been returned to the browser. You can use this event to provide a notification to users or to log errors. Sys.WebForms.PageRequestManager.getInstance().add_endRequest( function (sender, arg) { var modalPopupBehavior = $find('programmaticSavingLoadingModalPopupBehavior'); modalPopupBehavior.hide(); } ); Thanks in advance! Daniel.

    Read the article

  • (PHP) Validation, Security and Speed - Does my app have these?

    - by Devner
    Hi all, I am currently working on a building community website in PHP. This contains forms that a user can fill right from registration to lot of other functionality. I am not an Object-oriented guy, so I am using functions most of the time to handle my application. I know I have to learn OOPS, but currently need to develop this website and get it running soon. Anyway, here's a sample of what I let my app. do: Consider a page (register.php) that has a form where a user has 3 fields to fill up, say: First Name, Last Name and Email. Upon submission of this form, I want to validate the form and show the corresponding errors to the users: <form id="form1" name="form1" method="post" action="<?php echo $_SERVER['PHP_SELF']; ?>"> <label for="name">Name:</label> <input type="text" name="name" id="name" /><br /> <label for="lname">Last Name:</label> <input type="text" name="lname" id="lname" /><br /> <label for="email">Email:</label> <input type="text" name="email" id="email" /><br /> <input type="submit" name="submit" id="submit" value="Submit" /> </form> This form will POST the info to the same page. So here's the code that will process the POST'ed info: <?php require("functions.php"); if( isset($_POST['submit']) ) { $errors = fn_register(); if( count($errors) ) { //Show error messages } else { //Send welcome mail to the user or do database stuff... } } ?> <?php //functions.php page: function sql_quote( $value ) { if( get_magic_quotes_gpc() ) { $value = stripslashes( $value ); } else { $value = addslashes( $value ); } if( function_exists( "mysql_real_escape_string" ) ) { $value = mysql_real_escape_string( $value ); } return $value; } function clean($str) { $str = strip_tags($str, '<br>,<br />'); $str = trim($str); $str = sql_quote($str); return $str; } foreach ($_POST as &$value) { if (!is_array($value)) { $value = clean($value); } else { clean($value); } } foreach ($_GET as &$value) { if (!is_array($value)) { $value = clean($value); } else { clean($value); } } function validate_name( $fld, $min, $max, $rule, $label ) { if( $rule == 'required' ) { if ( trim($fld) == '' ) { $str = "$label: Cannot be left blank."; return $str; } } if ( isset($fld) && trim($fld) != '' ) { if ( isset($fld) && $fld != '' && !preg_match("/^[a-zA-Z\ ]+$/", $fld)) { $str = "$label: Invalid characters used! Only Lowercase, Uppercase alphabets and Spaces are allowed"; } else if ( strlen($fld) < $min or strlen($fld) > $max ) { $curr_char = strlen($fld); $str = "$label: Must be atleast $min character &amp; less than $max char. Entered characters: $curr_char"; } else { $str = 0; } } else { $str = 0; } return $str; } function validate_email( $fld, $min, $max, $rule, $label ) { if( $rule == 'required' ) { if ( trim($fld) == '' ) { $str = "$label: Cannot be left blank."; return $str; } } if ( isset($fld) && trim($fld) != '' ) { if ( !eregi('^[a-zA-Z0-9._-]+@[a-zA-Z0-9._-]+\.([a-zA-Z]{2,4})$', $fld) ) { $str = "$label: Invalid format. Please check."; } else if ( strlen($fld) < $min or strlen($fld) > $max ) { $curr_char = strlen($fld); $str = "$label: Must be atleast $min character &amp; less than $max char. Entered characters: $curr_char"; } else { $str = 0; } } else { $str = 0; } return $str; } function val_rules( $str, $val_type, $rule='required' ){ switch ($val_type) { case 'name': $val = validate_name( $str, 3, 20, $rule, 'First Name'); break; case 'lname': $val = validate_name( $str, 10, 20, $rule, 'Last Name'); break; case 'email': $val = validate_email( $str, 10, 60, $rule, 'Email'); break; } return $val; } function fn_register() { $errors = array(); $val_name = val_rules( $_POST['name'], 'name' ); $val_lname = val_rules( $_POST['lname'], 'lname', 'optional' ); $val_email = val_rules( $_POST['email'], 'email' ); if ( $val_name != '0' ) { $errors['name'] = $val_name; } if ( $val_lname != '0' ) { $errors['lname'] = $val_lname; } if ( $val_email != '0' ) { $errors['email'] = $val_email; } return $errors; } //END of functions.php page ?> OK, now it might look like there's a lot, but lemme break it down target wise: 1. I wanted the foreach ($_POST as &$value) and foreach ($_GET as &$value) loops to loop through the received info from the user submission and strip/remove all malicious input. I am calling a function called clean on the input first to achieve the objective as stated above. This function will process each of the input, whether individual field values or even arrays and allow only tags and remove everything else. The rest of it is obvious. Once this happens, the new/cleaned values will be processed by the fn_register() function and based on the values returned after the validation, we get the corresponding errors or NULL values (as applicable). So here's my questions: 1. This pretty much makes me feel secure as I am forcing the user to correct malicious data and won't process the final data unless the errors are corrected. Am I correct? Does the method that I follow guarantee the speed (as I am using lots of functions and their corresponding calls)? The fields of a form differ and the minimum number of fields I may have at any given point of time in any form may be 3 and can go upto as high as 100 (or even more, I am not sure as the website is still being developed). Will having 100's of fields and their validation in the above way, reduce the speed of application (say upto half a million users are accessing the website at the same time?). What can I do to improve the speed and reduce function calls (if possible)? 3, Can I do something to improve the current ways of validation? I am holding off object oriented approach and using FILTERS in PHP for the later. So please, I request you all to suggest me way to improve/tweak the current ways and suggest me if the script is vulnerable or safe enough to be used in a Live production environment. If not, what I can do to be able to use it live? Thank you all in advance.

    Read the article

  • Using javascript to limit survey choices to three unique values

    - by leanne
    I'm required to use a limited survey application, and have to adapt the provided code to meet more advanced functionality. I need to create a weighted ranking question, so users can select their top three choices and the data will go into the survey application and be accessible in the survey reports. The application only supports 2 types of questions (text fill & multiple choice) but I can alter the code, as long as it still sends the form data back to the survey application. The code is set up so it will show a drop-down menu of 0-3 for each option. Now I want to limit the user's choices so they can only select one "1" "2" or "3", three choices total. Ideally, if the user already had "2" selected for one option and they tried to select it for another option, it would set the first "2" as "0" or blank. Is this possible to do with javascript? If so, does anyone know of a site that might show code like this, or provide similar enough examples that I could adapt it? Current code here: <html> <head><title>Survey</title></head> <!-- Changes - remove br to put dropdown next to text for each item. Switch text & dropdown order for each item. - add comments to separate each question - removed blue title font - add instructions Goals - limit choices to one 1 one 2 and one 3, three choices total. --> <link href="---" rel="stylesheet" type="text/css"> <body bgcolor="#3c76a3"> <!-- TRANSITIONAL DIALOG BOX --> <table border="0" align="center" cellpadding="0" cellspacing="0" style="background-attachment: scroll; background-color: #3c76a3; background-repeat: no-repeat; background-position: left top;" bgcolor="#3c76a3" topmargin="0" marginwidth="0" marginheight="0" width="100%" height="100%"> <tr> <td> <table border="0" align="center" cellpadding="0" cellspacing="0" id="survey"> <tr> <td><p>&nbsp;</p> <!-- HEADER END --> <!-- FORM START TAG --><form name="survey" action="---" method="POST"> <FONT face="Verdana, Arial, Helvetica, sans-serif"> <b>survey</b><hr> <!-- 1 --> <input type=hidden name="Buy R.J. a DeLorean_multiple_answers" value="one"> <font size=2><select name="Buy R.J. a DeLorean" SIZE=1> <option value=""> <option value="0">0 <option value="1">1 <option value="2">2 <option value="3">3 </select></font> <input type="hidden" name="Buy R.J. a DeLorean_help" value=""> <b><font size=2>Buy R.J. a DeLorean</font></b> <hr size=1> <!-- 2 --> <input type=hidden name="Fill Lisa's office with marshmallows._multiple_answers" value="one"> <font size=2><select name="Fill Lisa's office with marshmallows." SIZE=1> <option value=""> <option value="0">0 <option value="1">1 <option value="2">2 <option value="3">3 </select></font> <input type="hidden" name="Fill Lisa's office with marshmallows._help" value=""> <b><font size=2>Fill Lisa's office with marshmallows.</font></b> <hr size=1> <!-- 3 --> <input type=hidden name="Install a beer fridge in everyone's filing cabinets._multiple_answers" value="one"> <font size=2><select name="Install a beer fridge in everyone's filing cabinets." SIZE=1> <option value=""> <option value="0">0 <option value="1">1 <option value="2">2 <option value="3">3 </select></font> <input type="hidden" name="Install a beer fridge in everyone's filing cabinets._help" value=""> <b><font size=2>Install a beer fridge in everyone's filing cabinets.</font></b> <hr size=1> <!-- 4 --> <input type=hidden name="Buy a company Cessna_multiple_answers" value="one"> <font size=2><select name="Buy a company Cessna" SIZE=1> <option value=""> <option value="0">0 <option value="1">1 <option value="2">2 <option value="3">3 </select></font> <input type="hidden" name="Buy a company Cessna_help" value=""> <b><font size=2>Buy a company Cessna</font></b><br> <hr size=1> <!-- 5 --> <input type=hidden name="Replace Conf2's chairs with miniature ponies._multiple_answers" value="one"> <font size=2><select name="Replace Conf2's chairs with miniature ponies." SIZE=1> <option value=""> <option value="0">0 <option value="1">1 <option value="2">2 <option value="3">3 </select></font> <input type="hidden" name="Replace Conf2's chairs with miniature ponies._help" value=""> <b><font size=2>Replace Conf2's chairs with miniature ponies.</font></b> <hr size=1> <input type="hidden" name="question_names" value="{Buy R.J. a DeLorean} {Fill Lisa's office with marshmallows.} {Install a beer fridge in everyone's filing cabinets.} {Buy a company Cessna} {Replace Conf2's chairs with miniature ponies.}"> <p align="right"><input type="image" BORDER=0 title="Save Changes" alt="Save Changes" src="---" name="button_save_changes"> <input type="hidden" name="showconfirm" value="T"> <input type="hidden" name="showresults" value="F"> <input type="hidden" name="preventdupesmemberid" value="T"> <input type="hidden" name="preventdupesip" value="F"> <input type="hidden" name="numberquestions" value="F"> <input type="hidden" name="destinationurl" value=""> <input type="hidden" name="original_survey_id" value="62"> <!-- FORM END TAG --></form> <!-- FOOTER START --> </td> </tr> </table> </td> </tr> </table> <!-- END HEADER --> </body> </html>

    Read the article

  • WCF Fails when using impersonation over 2 machine boundaries (3 machines)

    - by MrTortoise
    These scenarios work in their pieces. Its when i put it all together that it breaks. I have a WCF service using netTCP that uses impersonation to get the callers ID (role based security will be used at this level) on top of this is a WCF service using basicHTTP with TransportCredientialOnly which also uses impersonation I then have a client front end that connects to the basicHttp. the aim of the game is to return the clients username from the netTCP service at the bottom - so ultimatley i can use role based security here. each service is on a different machine - and each service works when you remove any calls they make to other services when you run a client for them both locally and remotley. IE the problem only manifests when you jump accross more than one machine boundary. IE the setup breaks when i connect each part together - but they work fine on their own. I also specify [OperationBehavior(Impersonation = ImpersonationOption.Required)] in the method and have IIS setup to only allow windows authentication (actually i have ananymous enabled still, but disabling makes no difference) This impersonation works fine in the scenario where i have a netTCP Service on Machine A with a client with a basicHttp service on machine B with a clinet for the basicHttp service also on machine B ... however if i move that client to any machine C i get the following error: The exception is 'The socket connection was aborted. This could be caused by an error processing your message or a receive timeout being exceeded by the remote host, or an underlying network resource issue. Local socket timeout was '00:10:00'' the inner message is 'An existing connection was forcibly closed by the remote host' Am beginning to think this is more a network issue than config ... but then im grasping at straws ... the config files are as follows (heading from the client down to the netTCP layer) <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <bindings> <basicHttpBinding> <binding name="basicHttpBindingEndpoint" closeTimeout="00:02:00" openTimeout="00:02:00" receiveTimeout="00:10:00" sendTimeout="00:02:00" allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <security mode="TransportCredentialOnly"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm="" /> <message clientCredentialType="UserName" algorithmSuite="Default" /> </security> </binding> </basicHttpBinding> </bindings> <client> <endpoint address="http://panrelease01/WCFTopWindowsTest/Service1.svc" binding="basicHttpBinding" bindingConfiguration="basicHttpBindingEndpoint" contract="ServiceReference1.IService1" name="basicHttpBindingEndpoint" behaviorConfiguration="ImpersonationBehaviour" /> </client> <behaviors> <endpointBehaviors> <behavior name="ImpersonationBehaviour"> <clientCredentials> <windows allowedImpersonationLevel="Impersonation"/> </clientCredentials> </behavior> </endpointBehaviors> </behaviors> </system.serviceModel> </configuration> the service for the client (basicHttp service and the client for the netTCP service) <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.web> <compilation debug="true" targetFramework="4.0" /> </system.web> <system.serviceModel> <bindings> <netTcpBinding> <binding name="netTcpBindingEndpoint" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" transactionFlow="false" transferMode="Buffered" transactionProtocol="OleTransactions" hostNameComparisonMode="StrongWildcard" listenBacklog="10" maxBufferPoolSize="524288" maxBufferSize="65536" maxConnections="10" maxReceivedMessageSize="65536"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Transport"> <transport clientCredentialType="Windows" protectionLevel="EncryptAndSign" /> <message clientCredentialType="Windows" /> </security> </binding> </netTcpBinding> <basicHttpBinding> <binding name="basicHttpWindows"> <security mode="TransportCredentialOnly"> <transport clientCredentialType="Windows"></transport> </security> </binding> </basicHttpBinding> </bindings> <client> <endpoint address="net.tcp://5d2x23j.panint.com/netTCPwindows/Service1.svc" binding="netTcpBinding" bindingConfiguration="netTcpBindingEndpoint" contract="ServiceReference1.IService1" name="netTcpBindingEndpoint" behaviorConfiguration="ImpersonationBehaviour"> <identity> <dns value="localhost" /> </identity> </endpoint> </client> <behaviors> <endpointBehaviors> <behavior name="ImpersonationBehaviour"> <clientCredentials> <windows allowedImpersonationLevel="Impersonation" allowNtlm="true"/> </clientCredentials> </behavior> </endpointBehaviors> <serviceBehaviors> <behavior name="WCFTopWindowsTest.basicHttpWindowsBehaviour"> <!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment --> <serviceMetadata httpGetEnabled="true" /> <!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information --> <serviceDebug includeExceptionDetailInFaults="true" /> </behavior> </serviceBehaviors> </behaviors> <services> <service name="WCFTopWindowsTest.Service1" behaviorConfiguration="WCFTopWindowsTest.basicHttpWindowsBehaviour"> <endpoint address="" binding="basicHttpBinding" bindingConfiguration="basicHttpWindows" name ="basicHttpBindingEndpoint" contract ="WCFTopWindowsTest.IService1"> </endpoint> </service> </services> <serviceHostingEnvironment multipleSiteBindingsEnabled="true" /> </system.serviceModel> <system.webServer> <modules runAllManagedModulesForAllRequests="true" /> <directoryBrowse enabled="true" /> </system.webServer> </configuration> then finally the service for the netTCP layer <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.web> <authentication mode="Windows"></authentication> <authorization> <allow roles="*"/> </authorization> <compilation debug="true" targetFramework="4.0" /> <identity impersonate="true" /> </system.web> <system.serviceModel> <bindings> <netTcpBinding> <binding name="netTCPwindows"> <security mode="Transport"> <transport clientCredentialType="Windows"></transport> </security> </binding> </netTcpBinding> </bindings> <services> <service behaviorConfiguration="netTCPwindows.netTCPwindowsBehaviour" name="netTCPwindows.Service1"> <endpoint address="" bindingConfiguration="netTCPwindows" binding="netTcpBinding" name="netTcpBindingEndpoint" contract="netTCPwindows.IService1"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mextcp" binding="mexTcpBinding" contract="IMetadataExchange"/> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:8721/test2" /> </baseAddresses> </host> </service> </services> <behaviors> <serviceBehaviors> <behavior name="netTCPwindows.netTCPwindowsBehaviour"> <!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment --> <serviceMetadata httpGetEnabled="false" /> <!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information --> <serviceDebug includeExceptionDetailInFaults="true" /> </behavior> </serviceBehaviors> </behaviors> <serviceHostingEnvironment multipleSiteBindingsEnabled="true" /> </system.serviceModel> <system.webServer> <modules runAllManagedModulesForAllRequests="true" /> <directoryBrowse enabled="true" /> </system.webServer> </configuration>

    Read the article

  • Problem with CSS on Wordpress

    - by Tdasads
    Hi there! I'm trying to code my sidebar.php but it breaks and goes all the way down below the posts PHP: <!-- begin sidebar --> <div id="menu"> <?php /* Widgetized sidebar, if you have the plugin installed. */ if ( !function_exists('dynamic_sidebar') || !dynamic_sidebar() ) : ?> <label for="s">SEARCH</label> <form id="searchform" method="get" action="#"> <div> <input type="text" name="s" id="s" size="15" /> <br /> <input type="submit" value="TYPE HERE_" /> </div> </form> <div class="bg-sidebar"> <h2>MOST READ</h2> <ul> <li><a href="javascript:void(0);">Worth A Thousand Words</a></li> <li><a href="javascript:void(0);">Feed Your Head</a></li> <li><a href="javascript:void(0);">Aliquam tempus, eros commodo porta pretium</a></li> <li><a href="javascript:void(0);">Pellentesque quis libero dui</a></li> <li><a href="javascript:void(0);">Lorem ipsum dolor sit amet</a></li> </ul> <h2>RECENT POSTS</h2> <ul> <li><a href="javascript:void(0);">Worth A Thousand Words</a></li> <li><a href="javascript:void(0);">Feed Your Head</a></li> <li><a href="javascript:void(0);">Aliquam tempus, eros commodo porta pretium</a></li> <li><a href="javascript:void(0);">Pellentesque quis libero dui</a></li> <li><a href="javascript:void(0);">Lorem ipsum dolor sit amet</a></li> </ul> <h2>ARCHIVE</h2> <ul> <li> <?php wp_get_archives('type=monthly'); ?> </li> </ul> <h2>LINKS</h2> <ul> <li><a href="http://www.t.com">t</a></li> <li><a href="http://www.tt.com">tt</a></li> </ul> </div> <?php endif; ?> </div> CSS: * { margin: 0; padding: 0; } body, input { font-family: "Trebuchet MS"; font-size: 12px; } .move { clear: both; height: 0; float: none !important; } body { background: url(images/bg.gif); width: 991px; position: absolute; top: 0; left: 50%; margin: 0 0 0 -495px; padding: 0 0 71px 0; } a { text-decoration: none; } li { list-style: none; } img { border: 0; } #searchform { float: left; width: 366px; height: 27px; } #searchform * { float: left;} #searchform label { width:75px; height: 26px; border: solid 1px #ab0000; border-width: 1px 1px 0 0; text-align: center; line-height: 25px; font-weight: bold; font-size: 18px; color: #ab0000; background: white; } #searchform p { border-bottom: solid 1px #ab0000; width: 290px; height: 25px; } #searchform input { border: 0; margin: 6px 0 0 10px; display: inline; width: 234px; font-weight: bold; color: #999999; background: transparent; outline: none; height: 16px; } #searchform button { background: url(images/btn_vai.gif); width: 34px; height: 24px; border: 0; margin: 0 0 2px 0; float: right; } #menu { width: 366px; height: 40px; float: left; margin: 1px 0 0 0; } .bg-sidebar { background: white; width: 366px; padding: 50px 0 0 0; } #menu h2 { color: #ab0000; font-size: 18px; line-height: 18px; padding: 0 0 10px 15px; } #menu ul { border-top: solid 1px #d5d5d5; padding: 0 0 38px 0; } #menu li { border-bottom: solid 1px #f3f2f2; line-height: 30px; font-size: 13px; font-weight: bold; padding: 0 0 0 24px; } #menu li a { color: black; } Can somebody help me out on this one?

    Read the article

  • org.apache.http.conn.HttpHostConnectException:Connection to http://172.20.38.143 refused

    - by Passion
    I have developed client server Application .I am accessing mysql with php running on my machine and client running on my cell which is connected to machine.WI-FI is also switched ON. Internet Permission are also added in Manifest file but then also the i encounter error 172.20.38.143 is IP OF MY MACHINE 06-01 13:20:10.391: W/System.err(11157): org.apache.http.conn.HttpHostConnectException: Connection to http://172.20.38.143 refused 06-01 13:20:10.401: W/System.err(11157): at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:183) 06-01 13:20:10.401: W/System.err(11157): at org.apache.http.impl.conn.AbstractPoolEntry.open(AbstractPoolEntry.java:164) 06-01 13:20:10.401: W/System.err(11157): at org.apache.http.impl.conn.AbstractPooledConnAdapter.open(AbstractPooledConnAdapter.java:119) 06-01 13:20:10.401: W/System.err(11157): at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:360) 06-01 13:20:10.401: W/System.err(11157): at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:674) 06-01 13:20:10.401: W/System.err(11157): at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:511) 06-01 13:20:10.401: W/System.err(11157): at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:489) 06-01 13:20:10.401: W/System.err(11157): at nineandroid.net.example.library.JSONParser.getJSONFromUrl(JSONParser.java:42) 06-01 13:20:10.401: W/System.err(11157): at nineandroid.net.example.library.UserFunctions.registerUser(UserFunctions.java:59) 06-01 13:20:10.401: W/System.err(11157): at nineandroid.net.example.RegisterActivity$1.onClick(RegisterActivity.java:52) 06-01 13:20:10.411: W/System.err(11157): at android.view.View.performClick(View.java:3567) 06-01 13:20:10.411: W/System.err(11157): at android.view.View$PerformClick.run(View.java:14224) 06-01 13:20:10.411: W/System.err(11157): at android.os.Handler.handleCallback(Handler.java:605) 06-01 13:20:10.411: W/System.err(11157): at android.os.Handler.dispatchMessage(Handler.java:92) 06-01 13:20:10.411: W/System.err(11157): at android.os.Looper.loop(Looper.java:137) 06-01 13:20:10.411: W/System.err(11157): at android.app.ActivityThread.main(ActivityThread.java:4517) 06-01 13:20:10.411: W/System.err(11157): at java.lang.reflect.Method.invokeNative(Native Method) 06-01 13:20:10.411: W/System.err(11157): at java.lang.reflect.Method.invoke(Method.java:511) 06-01 13:20:10.411: W/System.err(11157): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:993) 06-01 13:20:10.421: W/System.err(11157): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:760) 06-01 13:20:10.421: W/System.err(11157): at dalvik.system.NativeStart.main(Native Method) 06-01 13:20:10.421: W/System.err(11157): Caused by: java.net.ConnectException: failed to connect to /172.20.38.143 (port 80): connect failed: ENETUNREACH (Network is unreachable) 06-01 13:20:10.431: W/System.err(11157): at libcore.io.IoBridge.connect(IoBridge.java:114) 06-01 13:20:10.431: W/System.err(11157): at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:192) 06-01 13:20:10.431: W/System.err(11157): at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:459) 06-01 13:20:10.431: W/System.err(11157): at java.net.Socket.connect(Socket.java:848) 06-01 13:20:10.431: W/System.err(11157): at org.apache.http.conn.scheme.PlainSocketFactory.connectSocket(PlainSocketFactory.java:119) 06-01 13:20:10.431: W/System.err(11157): at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:144) 06-01 13:20:10.431: W/System.err(11157): ... 20 more 06-01 13:20:10.431: W/System.err(11157): Caused by: libcore.io.ErrnoException: connect failed: ENETUNREACH (Network is unreachable) 06-01 13:20:10.441: W/System.err(11157): at libcore.io.Posix.connect(Native Method) 06-01 13:20:10.441: W/System.err(11157): at libcore.io.BlockGuardOs.connect(BlockGuardOs.java:85) 06-01 13:20:10.441: W/System.err(11157): at libcore.io.IoBridge.connectErrno(IoBridge.java:127) 06-01 13:20:10.441: W/System.err(11157): at libcore.io.IoBridge.connect(IoBridge.java:112) 06-01 13:20:10.441: W/System.err(11157): ... 25 more 06-01 13:20:10.441: E/Buffer Error(11157): Error converting result java.lang.NullPointerException 06-01 13:20:10.451: E/JSON Parser(11157): Error parsing data org.json.JSONException: End of input at character 0 of 06-01 13:20:10.451: D/AndroidRuntime(11157): Shutting down VM 06-01 13:20:10.451: W/dalvikvm(11157): threadid=1: thread exiting with uncaught exception (group=0x40c0aa68) 06-01 13:20:10.451: E/AndroidRuntime(11157): FATAL EXCEPTION: main 06-01 13:20:10.451: E/AndroidRuntime(11157): java.lang.NullPointerException 06-01 13:20:10.451: E/AndroidRuntime(11157): at nineandroid.net.example.RegisterActivity$1.onClick(RegisterActivity.java:56) 06-01 13:20:10.451: E/AndroidRuntime(11157): at android.view.View.performClick(View.java:3567) 06-01 13:20:10.451: E/AndroidRuntime(11157): at android.view.View$PerformClick.run(View.java:14224) 06-01 13:20:10.451: E/AndroidRuntime(11157): at android.os.Handler.handleCallback(Handler.java:605) 06-01 13:20:10.451: E/AndroidRuntime(11157): at android.os.Handler.dispatchMessage(Handler.java:92) 06-01 13:20:10.451: E/AndroidRuntime(11157): at android.os.Looper.loop(Looper.java:137) 06-01 13:20:10.451: E/AndroidRuntime(11157): at android.app.ActivityThread.main(ActivityThread.java:4517) 06-01 13:20:10.451: E/AndroidRuntime(11157): at java.lang.reflect.Method.invokeNative(Native Method) 06-01 13:20:10.451: E/AndroidRuntime(11157): at java.lang.reflect.Method.invoke(Method.java:511) 06-01 13:20:10.451: E/AndroidRuntime(11157): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:993) 06-01 13:20:10.451: E/AndroidRuntime(11157): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:760) 06-01 13:20:10.451: E/AndroidRuntime(11157): at dalvik.system.NativeStart.main(Native Method) UserFunctions.java to call jsonParser public class UserFunctions { private JSONParser jsonParser; private static String loginURL = "http://172.20.38.143/ah_login_api/"; private static String registerURL = "http://172.20.38.143/ah_login_api/"; private static String login_tag = "login"; private static String register_tag = "register"; // constructor public UserFunctions(){ jsonParser = new JSONParser(); } /** * function make Login Request * @param email * @param password * */ public JSONObject loginUser(String email, String password){ // Building Parameters List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("tag", login_tag)); params.add(new BasicNameValuePair("email", email)); params.add(new BasicNameValuePair("password", password)); JSONObject json = jsonParser.getJSONFromUrl(loginURL, params); // return json // Log.e("JSON", json.toString()); return json; } /** * function make Login Request * @param name * @param email * @param password * */ public JSONObject registerUser(String name, String email, String password){ // Building Parameters List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("tag", register_tag)); params.add(new BasicNameValuePair("name", name)); params.add(new BasicNameValuePair("email", email)); params.add(new BasicNameValuePair("password", password)); // getting JSON Object JSONObject json = jsonParser.getJSONFromUrl(registerURL, params); // return json return json; } /** * Function get Login status * */ public boolean isUserLoggedIn(Context context){ DatabaseHandler db = new DatabaseHandler(context); int count = db.getRowCount(); if(count > 0){ // user logged in return true; } return false; } /** * Function to logout user * Reset Database * */ public boolean logoutUser(Context context){ DatabaseHandler db = new DatabaseHandler(context); db.resetTables(); return true; } } jsonParser.java public class JSONParser { static InputStream is = null; static JSONObject jObj = null; static String json = ""; // constructor public JSONParser() { } public JSONObject getJSONFromUrl(String url, List<NameValuePair> params) { // Making HTTP request try { // defaultHttpClient DefaultHttpClient httpClient = new DefaultHttpClient(); HttpPost httpPost = new HttpPost(url); httpPost.setEntity(new UrlEncodedFormEntity(params)); HttpResponse httpResponse = httpClient.execute(httpPost); HttpEntity httpEntity = httpResponse.getEntity(); is = httpEntity.getContent(); } catch (UnsupportedEncodingException e) { e.printStackTrace(); } catch (ClientProtocolException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } try { BufferedReader reader = new BufferedReader(new InputStreamReader( is, "iso-8859-1"), 8); StringBuilder sb = new StringBuilder(); String line = null; while ((line = reader.readLine()) != null) { sb.append(line + "\n"); } is.close(); json = sb.toString(); Log.e("JSON", json); } catch (Exception e) { Log.e("Buffer Error", "Error converting result " + e.toString()); } // try parse the string to a JSON object try { jObj = new JSONObject(json); } catch (JSONException e) { Log.e("JSON Parser", "Error parsing data " + e.toString()); } // return JSON String return jObj; } } RegisterActivity.java public class RegisterActivity extends Activity { Button btnRegister; Button btnLinkToLogin; EditText inputFullName; EditText inputEmail; EditText inputPassword; TextView registerErrorMsg; // JSON Response node names private static String KEY_SUCCESS = "success"; private static String KEY_UID = "uid"; private static String KEY_NAME = "name"; private static String KEY_EMAIL = "email"; private static String KEY_CREATED_AT = "created_at"; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.register); // Importing all assets like buttons, text fields inputFullName = (EditText) findViewById(R.id.registerName); inputEmail = (EditText) findViewById(R.id.registerEmail); inputPassword = (EditText) findViewById(R.id.registerPassword); btnRegister = (Button) findViewById(R.id.btnRegister); btnLinkToLogin = (Button) findViewById(R.id.btnLinkToLoginScreen); registerErrorMsg = (TextView) findViewById(R.id.register_error); // Register Button Click event btnRegister.setOnClickListener(new View.OnClickListener() { public void onClick(View view) { String name = inputFullName.getText().toString(); String email = inputEmail.getText().toString(); String password = inputPassword.getText().toString(); UserFunctions userFunction = new UserFunctions(); JSONObject json = userFunction.registerUser(name, email, password); // check for login response try { if (json.getString(KEY_SUCCESS) != null) { registerErrorMsg.setText(""); String res = json.getString(KEY_SUCCESS); if(Integer.parseInt(res) == 1){ // user successfully registred // Store user details in SQLite Database DatabaseHandler db = new DatabaseHandler(getApplicationContext()); JSONObject json_user = json.getJSONObject("user"); // Clear all previous data in database userFunction.logoutUser(getApplicationContext()); db.addUser(json_user.getString(KEY_NAME), json_user.getString(KEY_EMAIL), json.getString(KEY_UID), json_user.getString(KEY_CREATED_AT)); // Launch Dashboard Screen Intent dashboard = new Intent(getApplicationContext(), DashboardActivity.class); // Close all views before launching Dashboard dashboard.addFlags(Intent.FLAG_ACTIVITY_CLEAR_TOP); startActivity(dashboard); // Close Registration Screen finish(); }else{ // Error in registration registerErrorMsg.setText("Error occured in registration"); } } } catch (JSONException e) { e.printStackTrace(); } } }); // Link to Login Screen btnLinkToLogin.setOnClickListener(new View.OnClickListener() { public void onClick(View view) { Intent i = new Intent(getApplicationContext(), LoginActivity.class); startActivity(i); // Close Registration View finish(); } }); } }

    Read the article

  • header confusion. Compiler not recognizing datatypes

    - by numerical25
    I am getting confused on why the compiler is not recognizing my classes. So I am just going to show you my code and let you guys decide. My error is this error C2653: 'RenderEngine' : is not a class or namespace name and it's pointing to this line std::vector<RenderEngine::rDefaultVertex> m_verts; Here is the code for rModel, in its entirety. It contains the varible. the class that holds it is further down. #ifndef _MODEL_H #define _MODEL_H #include "stdafx.h" #include <vector> #include <string> //#include "RenderEngine.h" #include "rTri.h" class rModel { public: typedef tri<WORD> sTri; std::vector<sTri> m_tris; std::vector<RenderEngine::rDefaultVertex> m_verts; std::wstring m_name; ID3D10Buffer *m_pVertexBuffer; ID3D10Buffer *m_pIndexBuffer; rModel( const TCHAR *filename ); rModel( const TCHAR *name, int nVerts, int nTris ); ~rModel(); float GenRadius(); void Scale( float amt ); void Draw(); //------------------------------------ Access functions. int NumVerts(){ return m_verts.size(); } int NumTris(){ return m_tris.size(); } const TCHAR *Name(){ return m_name.c_str(); } RenderEngine::cDefaultVertex *VertData(){ return &m_verts[0]; } sTri *TriData(){ return &m_tris[0]; } }; #endif at the very top of the code there is a header file #include "stdafx.h" that includes this // stdafx.h : include file for standard system include files, // or project specific include files that are used frequently, but // are changed infrequently // #include "targetver.h" #define WIN32_LEAN_AND_MEAN // Exclude rarely-used stuff from Windows headers // Windows Header Files: #include <windows.h> // C RunTime Header Files #include <stdlib.h> #include <malloc.h> #include <memory.h> #include <tchar.h> #include "resource.h" #include "d3d10.h" #include "d3dx10.h" #include "dinput.h" #include "RenderEngine.h" #include "rModel.h" // TODO: reference additional headers your program requires here as you can see, RenderEngine.h comes before rModel.h #include "RenderEngine.h" #include "rModel.h" According to my knowledge, it should recognize it. But on the other hand, I am not really that great with organizing headers. Here my my RenderEngine Declaration. #pragma once #include "stdafx.h" #define MAX_LOADSTRING 100 #define MAX_LIGHTS 10 class RenderEngine { public: class rDefaultVertex { public: D3DXVECTOR3 m_vPosition; D3DXVECTOR3 m_vNormal; D3DXCOLOR m_vColor; D3DXVECTOR2 m_TexCoords; }; class rLight { public: rLight() { } D3DXCOLOR m_vColor; D3DXVECTOR3 m_vDirection; }; static HINSTANCE m_hInst; HWND m_hWnd; int m_nCmdShow; TCHAR m_szTitle[MAX_LOADSTRING]; // The title bar text TCHAR m_szWindowClass[MAX_LOADSTRING]; // the main window class name void DrawTextString(int x, int y, D3DXCOLOR color, const TCHAR *strOutput); //static functions static LRESULT CALLBACK WndProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam); static INT_PTR CALLBACK About(HWND hDlg, UINT message, WPARAM wParam, LPARAM lParam); bool InitWindow(); bool InitDirectX(); bool InitInstance(); int Run(); void ShutDown(); void AddLight(D3DCOLOR color, D3DXVECTOR3 pos); RenderEngine() { m_screenRect.right = 800; m_screenRect.bottom = 600; m_iNumLights = 0; } protected: RECT m_screenRect; //direct3d Members ID3D10Device *m_pDevice; // The IDirect3DDevice10 // interface ID3D10Texture2D *m_pBackBuffer; // Pointer to the back buffer ID3D10RenderTargetView *m_pRenderTargetView; // Pointer to render target view IDXGISwapChain *m_pSwapChain; // Pointer to the swap chain RECT m_rcScreenRect; // The dimensions of the screen ID3D10Texture2D *m_pDepthStencilBuffer; ID3D10DepthStencilState *m_pDepthStencilState; ID3D10DepthStencilView *m_pDepthStencilView; //transformation matrixs system D3DXMATRIX m_mtxWorld; D3DXMATRIX m_mtxView; D3DXMATRIX m_mtxProj; //pointers to shaders matrix varibles ID3D10EffectMatrixVariable* m_pmtxWorldVar; ID3D10EffectMatrixVariable* m_pmtxViewVar; ID3D10EffectMatrixVariable* m_pmtxProjVar; //Application Lights rLight m_aLights[MAX_LIGHTS]; // Light array int m_iNumLights; // Number of active lights //light pointers from shader ID3D10EffectVectorVariable* m_pLightDirVar; ID3D10EffectVectorVariable* m_pLightColorVar; ID3D10EffectVectorVariable* m_pNumLightsVar; //Effect members ID3D10Effect *m_pDefaultEffect; ID3D10EffectTechnique *m_pDefaultTechnique; ID3D10InputLayout* m_pDefaultInputLayout; ID3DX10Font *m_pFont; // The font used for rendering text // Sprites used to hold font characters ID3DX10Sprite *m_pFontSprite; ATOM RegisterEngineClass(); void DoFrame(float); bool LoadEffects(); void UpdateMatrices(); void UpdateLights(); }; The classes are defined within the class class rDefaultVertex { public: D3DXVECTOR3 m_vPosition; D3DXVECTOR3 m_vNormal; D3DXCOLOR m_vColor; D3DXVECTOR2 m_TexCoords; }; class rLight { public: rLight() { } D3DXCOLOR m_vColor; D3DXVECTOR3 m_vDirection; }; Not sure if thats good practice, but I am just going by the book. In the end, I just need a good way to organize it so that rModel recognizes RenderEngine. and if possible, the other way around.

    Read the article

  • need prefuse graph edges like arrows

    - by merve
    Hello, I did my homework and searched both google for a sample and a topic that is answered before on stackoverflow. But nothing has been found. My problem is ordinary edges who does not have a view like arrows. Here is what i do to hope there is forward arrows from target to destination: LabelRenderer nameLabel = new LabelRenderer("name"); nameLabel.setRoundedCorner(8, 8); DefaultRendererFactory rendererFactory = new DefaultRendererFactory(nameLabel); EdgeRenderer edgeRenderer; edgeRenderer = new EdgeRenderer(prefuse.Constants.EDGE_TYPE_LINE, prefuse.Constants.EDGE_ARROW_FORWARD); rendererFactory.setDefaultEdgeRenderer(edgeRenderer); vis.setRendererFactory(rendererFactory); Here is what i see about colour of edges, hoping these must not be transparent: int[] palette = new int[]{ColorLib.rgb(255, 180, 180), ColorLib.rgb(190, 190, 255)}; DataColorAction fill = new DataColorAction("socialnet.nodes", "gender", Constants.NOMINAL, VisualItem.FILLCOLOR, palette); ColorAction text = new ColorAction("socialnet.nodes", VisualItem.TEXTCOLOR, ColorLib.gray(0)); ColorAction edges = new ColorAction("socialnet.edges", VisualItem.STROKECOLOR, ColorLib.gray(200)); ColorAction arrow = new ColorAction("socialnet.edges", VisualItem.FILLCOLOR, ColorLib.gray(200)); ActionList colour = new ActionList(); colour.add(fill); colour.add(text); colour.add(edges); colour.add(arrow); vis.putAction("colour", colour); Thus, i wonder where am i wrong? Why my edges do not seem like arrows? Thanks for any idea. For more detail, i want to paste all of the code: /* * To change this template, choose Tools | Templates * and open the template in the editor. */ package prefusedeneme; import javax.swing.JFrame; import prefuse.data.*; import prefuse.data.io.*; import prefuse.Display; import prefuse.Visualization; import prefuse.render.*; import prefuse.util.*; import prefuse.action.assignment.*; import prefuse.Constants; import prefuse.visual.*; import prefuse.action.*; import prefuse.activity.*; import prefuse.action.layout.graph.*; import prefuse.controls.*; import prefuse.data.expression.Predicate; import prefuse.data.expression.parser.ExpressionParser; public class SocialNetworkVis { public static void main(String argv[]) { // 1. Load the data Graph graph = null; /* graph will contain the core data */ try { graph = new GraphMLReader().readGraph("socialnet.xml"); /* load the data from an XML file */ } catch (DataIOException e) { e.printStackTrace(); System.err.println("Error loading graph. Exiting..."); System.exit(1); } // 2. prepare the visualization Visualization vis = new Visualization(); /* vis is the main object that will run the visualization */ vis.add("socialnet", graph); /* add our data to the visualization */ // 3. setup the renderers and the render factory // labels for name LabelRenderer nameLabel = new LabelRenderer("name"); nameLabel.setRoundedCorner(8, 8); /* nameLabel decribes how to draw the data elements labeled as "name" */ // create the render factory DefaultRendererFactory rendererFactory = new DefaultRendererFactory(nameLabel); EdgeRenderer edgeRenderer; edgeRenderer = new EdgeRenderer(prefuse.Constants.EDGE_TYPE_LINE, prefuse.Constants.EDGE_ARROW_FORWARD); rendererFactory.setDefaultEdgeRenderer(edgeRenderer); vis.setRendererFactory(rendererFactory); // 4. process the actions // colour palette for nominal data type int[] palette = new int[]{ColorLib.rgb(255, 180, 180), ColorLib.rgb(190, 190, 255)}; /* ColorLib.rgb converts the colour values to integers */ // map data to colours in the palette DataColorAction fill = new DataColorAction("socialnet.nodes", "gender", Constants.NOMINAL, VisualItem.FILLCOLOR, palette); /* fill describes what colour to draw the graph based on a portion of the data */ // node text ColorAction text = new ColorAction("socialnet.nodes", VisualItem.TEXTCOLOR, ColorLib.gray(0)); /* text describes what colour to draw the text */ // edge ColorAction edges = new ColorAction("socialnet.edges", VisualItem.STROKECOLOR, ColorLib.gray(200)); ColorAction arrow = new ColorAction("socialnet.edges", VisualItem.FILLCOLOR, ColorLib.gray(200)); /* edge describes what colour to draw the edges */ // combine the colour assignments into an action list ActionList colour = new ActionList(); colour.add(fill); colour.add(text); colour.add(edges); colour.add(arrow); vis.putAction("colour", colour); /* add the colour actions to the visualization */ // create a separate action list for the layout ActionList layout = new ActionList(Activity.INFINITY); layout.add(new ForceDirectedLayout("socialnet")); /* use a force-directed graph layout with default parameters */ layout.add(new RepaintAction()); /* repaint after each movement of the graph nodes */ vis.putAction("layout", layout); /* add the laout actions to the visualization */ // 5. add interactive controls for visualization Display display = new Display(vis); display.setSize(700, 700); display.pan(350, 350); // pan to the middle display.addControlListener(new DragControl()); /* allow items to be dragged around */ display.addControlListener(new PanControl()); /* allow the display to be panned (moved left/right, up/down) (left-drag)*/ display.addControlListener(new ZoomControl()); /* allow the display to be zoomed (right-drag) */ // 6. launch the visualizer in a JFrame JFrame frame = new JFrame("prefuse tutorial: socialnet"); /* frame is the main window */ frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frame.add(display); /* add the display (which holds the visualization) to the window */ frame.pack(); frame.setVisible(true); /* start the visualization working */ vis.run("colour"); vis.run("layout"); } }

    Read the article

  • Facebook like button not going back side on the fixed div

    - by Lahiru Chathuranga
    I added a Facebook like button to my website.My website has a fixed div on top of the page(blue color div in the image). The like button is below that(in a div which can scroll) My problem is when the page is scroll down the like button comes on top of the fixed div(blue color).I want to scroll it from the backside of the div.How can I do that? There are couple of screenshots I added Before Scroll After Scroll Here is my code of the fixed div <script type="text/javascript"> function got_to_signup(){ window.location.href = "view/policy"; } </script> <div id="fb-root"></div> <script>(function(d, s, id) { var js, fjs = d.getElementsByTagName(s)[0]; if (d.getElementById(id)) return; js = d.createElement(s); js.id = id; js.src = "//connect.facebook.net/en_GB/all.js#xfbml=1&appId=368003049941951"; fjs.parentNode.insertBefore(js, fjs); }(document, 'script', 'facebook-jssdk'));</script> <div style="width:100%;background-color:#0094d6;" > <div id="dd" style="background-color:#0094d6; width:100%; height:75px;position:fixed; " class="center "><div id="a" style="width:1010px; height:75px; background-color:#000000;background:url(xx.png); background-repeat:no-repeat; font-family:Arial, Helvetica, sans-serif; font-size:11px; color:#003; " class="inner div_border"> <table width="1010" border="0" > <tr > <td width="15%" rowspan="2"><a href="" style="cursor:pointer; cursor:hand;"><div style="width:200px; height:50px;background-color:none;"></div></a></td> <td width="22%" height="14">&nbsp;</td> <td width="5%">&nbsp;</td> <td width="5%">&nbsp;</td> <td width="28%">&nbsp;</td> <td width="2%">&nbsp;</td> <td width="23%">&nbsp;</td> </tr> <tr> <td colspan="4"> </td> <td colspan="2"><span style="float: right; " ><div style="background-color:#006d9e;border-radius:3px; width:250px; height:34px; display: table; vertical-align: middle; color:#FFF; "> <table width="100%" border="0" > <tr > <td width="43%" style="text-align:center"> Start to bump !</td> <td width="29%"><div id='basic-modal'><span style="float: right; " ><input name="login_btn" type="button" class="login_button basic" id="login_btn" value="Sign in" /></span></div></td> <td width="28%"><span style="float: right; " ><form id="form_reg" method="post"><input name="register_btn" type="button" class="register_button" id="register_btn" value="Sign up" onclick="got_to_signup()"/></form></span></td> </tr> </table> </div></span></td> </tr> <tr> <td>&nbsp;</td> <td>&nbsp;</td> <td>&nbsp;</td> <td>&nbsp;</td> <td>&nbsp;</td> <td>&nbsp;</td> <td style="color:#FFF; font:Arial, Helvetica, sans-serif; font-size:9px; text-align:right;"> Beta Version </td> </tr> </table> </div></div></div> here is my facebook like button code </script> <div id="fb-root"></div> <script>(function(d, s, id) { var js, fjs = d.getElementsByTagName(s)[0]; if (d.getElementById(id)) return; js = d.createElement(s); js.id = id; js.src = "//connect.facebook.net/en_GB/all.js#xfbml=1&appId=368003049941951"; fjs.parentNode.insertBefore(js, fjs); }(document, 'script', 'facebook-jssdk'));</script> <td height="21" colspan="2"> <table width="187" style="margin-left:3px;font-size:1px;background-image:url(share_back.png);background-repeat:no-repeat;border-radius:3px;" > <!--tweeter button--> <tr><td width="71"><a href="https://twitter.com/bump_lk" class="twitter-follow-button" data-show-count="false" style="float:right;">Follow @bump_lk</a> <script>!function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs");</script></td> <!--facebook like button--> <td width="48"><div class="fb-like" data-href="https://www.facebook.com/Bump.lk" data-send="false" data-layout="button_count" data-width="10" data-show-faces="false" style="position:relative;"></div> </td></tr></table></td> <td>&nbsp;</td> <td>&nbsp;</td> <td >

    Read the article

  • Turning PHP page calling Zend functions procedurally into Zend Framework MVC-help!

    - by Joel
    Hi guys, I posted much of this question, but if didn't include all the Zend stuff because I thought it'd be overkill, but now I'm thinking it's not easy to figure out an OO way of doing this without that code... So with that said, please forgive the verbose code. I'm learning how to use MVC and OO in general, and I have a website that is all in PHP but most of the pages are basic static pages. I have already converted them all to views in Zend Framework, and have the Controller and layout set. All is good there. The one remaining page I have is the main reason I did this...it in fact uses Zend library (for gData connection and pulling info from a Google Calendar and displaying it on the page. I don't know enough about this to know where to begin to refactor the code to fit in the Zend Framework MVC model. Any help would be greatly appreciated!! .phtml view page: <div id="dhtmltooltip" align="left"></div> <script src="../js/tooltip.js" type="text/javascript"> </script> <div id="container"> <div id="conten"> <a name="C4"></a> <?php function get_desc_second_part(&$value) { list(,$val_b) = explode('==',$value); $value = trim($val_b); } function filterEventDetails($contentText) { $data = array(); foreach($contentText as $row) { if(strstr($row, 'When: ')) { ##cleaning "when" string to get date in the format "May 28, 2009"## $data['duration'] = str_replace('When: ','',$row); list($when, ) = explode(' to ',$data['duration']); $data['when'] = substr($when,4); if(strlen($data['when'])>13) $data['when'] = trim(str_replace(strrchr($data['when'], ' '),'',$data['when'])); $data['duration'] = substr($data['duration'], 0, strlen($data['duration'])-4); //trimming time zone identifier (UTC etc.) } if(strstr($row, 'Where: ')) { $data['where'] = str_replace('Where: ','',$row); //pr($row); //$where = strstr($row, 'Where: '); //pr($where); } if(strstr($row, 'Event Description: ')) { $event_desc = str_replace('Event Description: ','',$row); //$event_desc = strstr($row, 'Event Description: '); ## Filtering event description and extracting venue, ticket urls etc from it. //$event_desc = str_replace('Event Description: ','',$contentText[3]); $event_desc_array = explode('|',$event_desc); array_walk($event_desc_array,'get_desc_second_part'); //pr($event_desc_array); $data['venue_url'] = $event_desc_array[0]; $data['details'] = $event_desc_array[1]; $data['tickets_url'] = $event_desc_array[2]; $data['tickets_button'] = $event_desc_array[3]; $data['facebook_url'] = $event_desc_array[4]; $data['facebook_icon'] = $event_desc_array[5]; } } return $data; } // load library require_once 'Zend/Loader.php'; Zend_Loader::loadClass('Zend_Gdata'); Zend_Loader::loadClass('Zend_Gdata_ClientLogin'); Zend_Loader::loadClass('Zend_Gdata_Calendar'); Zend_Loader::loadClass('Zend_Http_Client'); // create authenticated HTTP client for Calendar service $gcal = Zend_Gdata_Calendar::AUTH_SERVICE_NAME; $user = "[email protected]"; $pass = "xxxxxxxx"; $client = Zend_Gdata_ClientLogin::getHttpClient($user, $pass, $gcal); $gcal = new Zend_Gdata_Calendar($client); $query = $gcal->newEventQuery(); $query->setUser('[email protected]'); $secondary=true; $query->setVisibility('private'); $query->setProjection('basic'); $query->setOrderby('starttime'); $query->setSortOrder('ascending'); //$query->setFutureevents('true'); $startDate=date('Y-m-d h:i:s'); $endDate="2015-12-31"; $query->setStartMin($startDate); $query->setStartMax($endDate); $query->setMaxResults(30); try { $feed = $gcal->getCalendarEventFeed($query); } catch (Zend_Gdata_App_Exception $e) { echo "Error: " . $e->getResponse(); } ?> <h1><?php echo $feed->title; ?></h1> <?php echo $feed->totalResults; ?> event(s) found. <table width="90%" border="3" align="center"> <tr> <td width="20%" align="center" valign="middle"><b>;DATE</b></td> <td width="25%" align="center" valign="middle"><b>VENUE</b></td> <td width="20%" align="center" valign="middle"><b>CITY</b></td> <td width="20%" align="center" valign="middle"><b>DETAILS</b></td> <td width="15%" align="center" valign="middle"><b>LINKS</b></td> </tr> <?php if((int)$feed->totalResults>0) { //checking if at least one event is there in this date range foreach ($feed as $event) { //iterating through all events //pr($event);die; $contentText = stripslashes($event->content->text); //striping any escape character $contentText = preg_replace('/\<br \/\>[\n\t\s]{1,}\<br \/\>/','<br />',stripslashes($event->content->text)); //replacing multiple breaks with a single break //die(); $contentText = explode('<br />',$contentText); //splitting data by break tag $eventData = filterEventDetails($contentText); $when = $eventData['when']; $where = $eventData['where']; $duration = $eventData['duration']; $venue_url = $eventData['venue_url']; $details = $eventData['details']; $tickets_url = $eventData['tickets_url']; $tickets_button = $eventData['tickets_button']; $facebook_url = $eventData['facebook_url']; $facebook_icon = $eventData['facebook_icon']; $title = stripslashes($event->title); echo '<tr>'; echo '<td width="20%" align="center" valign="middle" nowrap="nowrap">'; echo $when; echo '</td>'; echo '<td width="20%" align="center" valign="middle">'; if($venue_url!='') { echo '<a href="'.$venue_url.'" target="_blank">'.$title.'</a>'; } else { echo $title; } echo '</td>'; echo '<td width="20%" align="center" valign="middle">'; echo $where; echo '</td>'; echo '<td width="20%" align="center" valign="middle">'; $details = str_replace("\n","<br>",htmlentities($details)); $duration = str_replace("\n","<br>",$duration); $detailed_description = "<b>When</b>: <br>".$duration."<br><br>"; $detailed_description .= "<b>Description</b>: <br>".$details; echo '<a href="javascript:void(0);" onmouseover="ddrivetip(\''.$detailed_description.'\')" onmouseout="hideddrivetip()" onclick="return false">View Details</a>'; echo '</td>'; echo '<td width="20%" valign="middle">'; if(trim($tickets_url) !='' && trim($tickets_button)!='') { echo '<a href="'.$tickets_url.'" target="_blank"><img src="'.$tickets_button.'" border="0" ></a>'; } if(trim($facebook_url) !='' && trim($facebook_icon)!='') { echo '<a href="'.$facebook_url.'" target="_blank"><img src="'.$facebook_icon.'" border="0" ></a>'; } else { echo '......'; } echo '</td>'; echo '</tr>'; } } else { //else show 'no event found' message echo '<tr>'; echo '<td width="100%" align="center" valign="middle" colspan="5">'; echo "No event found"; echo '</td>'; } ?> </table> <h3><a href="#pastevents">Scroll down for a list of past shows.</a></h3> <br /> <a name="pastevents"></a> <ul class="pastShows"> <?php $startDate='2005-01-01'; $endDate=date('Y-m-d'); /*$gcal = Zend_Gdata_Calendar::AUTH_SERVICE_NAME; $user = "[email protected]"; $pass = "silverroof10"; $client = Zend_Gdata_ClientLogin::getHttpClient($user, $pass, $gcal); $gcal = new Zend_Gdata_Calendar($client); $query = $gcal->newEventQuery(); $query->setUser('[email protected]'); $query->setVisibility('private'); $query->setProjection('basic');*/ $query->setOrderby('starttime'); $query->setSortOrder('descending'); $query->setFutureevents('false'); $query->setStartMin($startDate); $query->setStartMax($endDate); $query->setMaxResults(1000); try { $feed = $gcal->getCalendarEventFeed($query); } catch (Zend_Gdata_App_Exception $e) { echo "Error: " . $e->getResponse(); } if((int)$feed->totalResults>0) { //checking if at least one event is there in this date range foreach ($feed as $event) { //iterating through all events $contentText = stripslashes($event->content->text); //striping any escape character $contentText = preg_replace('/\<br \/\>[\n\t\s]{1,}\<br \/\>/','<br />',stripslashes($event->content->text)); //replacing multiple breaks with a single break $contentText = explode('<br />',$contentText); //splitting data by break tag $eventData = filterEventDetails($contentText); $when = $eventData['when']; $where = $eventData['where']; $duration = $eventData['duration']; $title = stripslashes($event->title); echo '<li class="pastShows">' . $when . " - " . $title . ", " . $where . '</li>'; } } ?> </div> </div>

    Read the article

  • Parse XML document

    - by Neil
    I am trying to parse a remote XML document (from Amazon AWS): <ItemLookupResponse xmlns="http://webservices.amazon.com/AWSECommerceService/2009-03-31"> <OperationRequest> <RequestId>011d32c5-4fab-4c7d-8785-ac48b9bda6da</RequestId> <Arguments> <Argument Name="Condition" Value="New"></Argument> <Argument Name="Operation" Value="ItemLookup"></Argument> <Argument Name="Service" Value="AWSECommerceService"></Argument> <Argument Name="Signature" Value="73l8oLJhITTsWtHxsdrS3BMKsdf01n37PE8u/XCbsJM="></Argument> <Argument Name="MerchantId" Value="Amazon"></Argument> <Argument Name="Version" Value="2009-03-31"></Argument> <Argument Name="ItemId" Value="603084260089"></Argument> <Argument Name="IdType" Value="UPC"></Argument> <Argument Name="AWSAccessKeyId" Value="[myAccessKey]"></Argument> <Argument Name="Timestamp" Value="2010-06-14T15:03:27Z"></Argument> <Argument Name="ResponseGroup" Value="OfferSummary,ItemAttributes"></Argument> <Argument Name="SearchIndex" Value="All"></Argument> </Arguments> <RequestProcessingTime>0.0318510000000000</RequestProcessingTime> </OperationRequest> <Items> <Request> <IsValid>True</IsValid> <ItemLookupRequest> <Condition>New</Condition> <DeliveryMethod>Ship</DeliveryMethod> <IdType>UPC</IdType> <MerchantId>Amazon</MerchantId> <OfferPage>1</OfferPage> <ItemId>603084260089</ItemId> <ResponseGroup>OfferSummary</ResponseGroup> <ResponseGroup>ItemAttributes</ResponseGroup> <ReviewPage>1</ReviewPage> <ReviewSort>-SubmissionDate</ReviewSort> <SearchIndex>All</SearchIndex> <VariationPage>All</VariationPage> </ItemLookupRequest> </Request> <Item> <ASIN>B0000UTUNI</ASIN> <DetailPageURL>http://www.amazon.com/Garnier-Fructis-Fortifying-Conditioner-Minute/dp/B0000UTUNI%3FSubscriptionId%3DAKIAIYPTKHCWTRWWPWBQ%26tag%3Dws%26linkCode%3Dxm2%26camp%3D2025%26creative%3D165953%26creativeASIN%3DB0000UTUNI</DetailPageURL> <ItemLinks> <ItemLink> <Description>Technical Details</Description> <URL>http://www.amazon.com/Garnier-Fructis-Fortifying-Conditioner-Minute/dp/tech-data/B0000UTUNI%3FSubscriptionId%3DAKIAIYPTKHCWTRWWPWBQ%26tag%3Dws%26linkCode%3Dxm2%26camp%3D2025%26creative%3D386001%26creativeASIN%3DB0000UTUNI</URL> </ItemLink> <ItemLink> <Description>Add To Baby Registry</Description> <URL>http://www.amazon.com/gp/registry/baby/add-item.html%3Fasin.0%3DB0000UTUNI%26SubscriptionId%3DAKIAIYPTKHCWTRWWPWBQ%26tag%3Dws%26linkCode%3Dxm2%26camp%3D2025%26creative%3D386001%26creativeASIN%3DB0000UTUNI</URL> </ItemLink> <ItemLink> <Description>Add To Wedding Registry</Description> <URL>http://www.amazon.com/gp/registry/wedding/add-item.html%3Fasin.0%3DB0000UTUNI%26SubscriptionId%3DAKIAIYPTKHCWTRWWPWBQ%26tag%3Dws%26linkCode%3Dxm2%26camp%3D2025%26creative%3D386001%26creativeASIN%3DB0000UTUNI</URL> </ItemLink> <ItemLink> <Description>Add To Wishlist</Description> <URL>http://www.amazon.com/gp/registry/wishlist/add-item.html%3Fasin.0%3DB0000UTUNI%26SubscriptionId%3DAKIAIYPTKHCWTRWWPWBQ%26tag%3Dws%26linkCode%3Dxm2%26camp%3D2025%26creative%3D386001%26creativeASIN%3DB0000UTUNI</URL> </ItemLink> <ItemLink> <Description>Tell A Friend</Description> <URL>http://www.amazon.com/gp/pdp/taf/B0000UTUNI%3FSubscriptionId%3DAKIAIYPTKHCWTRWWPWBQ%26tag%3Dws%26linkCode%3Dxm2%26camp%3D2025%26creative%3D386001%26creativeASIN%3DB0000UTUNI</URL> </ItemLink> <ItemLink> <Description>All Customer Reviews</Description> <URL>http://www.amazon.com/review/product/B0000UTUNI%3FSubscriptionId%3DAKIAIYPTKHCWTRWWPWBQ%26tag%3Dws%26linkCode%3Dxm2%26camp%3D2025%26creative%3D386001%26creativeASIN%3DB0000UTUNI</URL> </ItemLink> <ItemLink> <Description>All Offers</Description> <URL>http://www.amazon.com/gp/offer-listing/B0000UTUNI%3FSubscriptionId%3DAKIAIYPTKHCWTRWWPWBQ%26tag%3Dws%26linkCode%3Dxm2%26camp%3D2025%26creative%3D386001%26creativeASIN%3DB0000UTUNI</URL> </ItemLink> </ItemLinks> <ItemAttributes> <Binding>Health and Beauty</Binding> <Brand>Garnier</Brand> <EAN>0603084260089</EAN> <Feature>Helps restore strength and shine</Feature> <Feature>Penetrates deep to nourish, repair and rejuvenate</Feature> <Feature>Makes hair softer and more manageable without weighing it down</Feature> <ItemDimensions> <Weight Units="hundredths-pounds">40</Weight> </ItemDimensions> <Label>Garnier</Label> <ListPrice> <Amount>419</Amount> <CurrencyCode>USD</CurrencyCode> <FormattedPrice>$4.19</FormattedPrice> </ListPrice> <Manufacturer>Garnier</Manufacturer> <NumberOfItems>1</NumberOfItems> <ProductGroup>Health and Beauty</ProductGroup> <ProductTypeName>ABIS_DRUGSTORE</ProductTypeName> <Publisher>Garnier</Publisher> <Size>5.0 oz</Size> <Studio>Garnier</Studio> <Title>Garnier Fructis Fortifying Fortifying Deep Conditioner, 3 Minute Masque - 5 oz</Title> <UPC>603084260089</UPC> </ItemAttributes> <OfferSummary> <LowestNewPrice> <Amount>229</Amount> <CurrencyCode>USD</CurrencyCode> <FormattedPrice>$2.29</FormattedPrice> </LowestNewPrice> <TotalNew>7</TotalNew> <TotalUsed>0</TotalUsed> <TotalCollectible>0</TotalCollectible> <TotalRefurbished>0</TotalRefurbished> </OfferSummary> </Item> </Items> </ItemLookupResponse> I am trying to extract data from the XML stream using XPathDocument, but with no luck: WebRequest request = HttpWebRequest.Create(url); WebResponse response = request.GetResponse(); //XmlDocument doc = new XmlDocument(); XPathDocument Doc = new XPathDocument(response.GetResponseStream()); XPathNavigator nav = Doc.CreateNavigator(); XPathNodeIterator ListPrice = nav.Select("/ItemLookupResponse/Items/Item/ItemAttributes/ListPrice"); foreach (XPathNavigator node in ListPrice) { Response.Write(node.GetAttribute("Amount", NAMESPACE)); } What am I missing? Thanks in advance!!

    Read the article

  • trying to center a css menu made on purecssmenu.com

    - by Party Mcfly
    i have a menu that i generated on purecssmenu.com and im having trouble trying to center it on my page here is the code... <!-- Start PureCSSMenu.com STYLE --> <style> #pcm{display:none;} ul.pureCssMenu ul{display:none} ul.pureCssMenu li:hover>ul{display:block} ul.pureCssMenu ul{position: absolute;left:-1px;top:98%;} ul.pureCssMenu ul ul{position: absolute;left:98%;top:-2px;} ul.pureCssMenu,ul.pureCssMenu ul { margin:0px; list-style:none; padding:0px 2px 2px 0px; background-color:#000000; background-repeat:repeat; border-color:#000000; border-width:1px; border-style:solid; } ul.pureCssMenu table {border-collapse:collapse}ul.pureCssMenu { display:block; zoom:1; float: left; } ul.pureCssMenu ul{ width:80.85000000000001px; } ul.pureCssMenu li{ display:block; margin:2px 0px 0px 2px; font-size:0px; } ul.pureCssMenu a:active, ul.pureCssMenu a:focus { outline-style:none; } ul.pureCssMenu a, ul.pureCssMenu li.dis a:hover, ul.pureCssMenu li.sep a:hover { display:block; vertical-align:middle; background-color:#000000; border-width:1px; border-color:#000000; border-style:solid; text-align:left; text-decoration:none; padding:2px 5px 2px 10px; _padding-left:0; font:11px Arial; color: #969696; text-decoration:none; cursor:default; } ul.pureCssMenu span{ overflow:hidden; } ul.pureCssMenu li { float:left; } ul.pureCssMenu ul li { float:none; } ul.pureCssMenu ul a { text-align:left; white-space:nowrap; } ul.pureCssMenu li.sep{ text-align:left; padding:0px; line-height:0; height:100%; } ul.pureCssMenu li.sep span{ float:none; padding-right:0; width:3px; height:100%; display:inline-block; background-color:#cccccc #111111 #111111 #cccccc; background-image:none;} ul.pureCssMenu ul li.sep span{ width:100%; height:3px; } ul.pureCssMenu li:hover{ position:relative; } ul.pureCssMenu li:hover>a{ background-color:#000000; border-color:#000000; border-style:solid; font:11px Arial; color: #ffa500; text-decoration:none; } ul.pureCssMenu li a:hover{ position:relative; background-color:#000000; border-color:#000000; border-style:solid; font:11px Arial; color: #ffa500; text-decoration:none; } ul.pureCssMenu li.dis a { color: #666 !important; } ul.pureCssMenu img {border: none;float:left;_float:none;margin-right:2px;width:16px; height:16px; } ul.pureCssMenu ul img {width:16px; height:16px; } ul.pureCssMenu img.over{display:none} ul.pureCssMenu li.dis a:hover img.over{display:none !important} ul.pureCssMenu li.dis a:hover img.def {display:inline !important} ul.pureCssMenu li:hover > a img.def {display:none} ul.pureCssMenu li:hover > a img.over {display:inline} ul.pureCssMenu a:hover img.over,ul.pureCssMenu a:hover ul img.def,ul.pureCssMenu a:hover a:hover img.over{display:inline} ul.pureCssMenu a:hover img.def,ul.pureCssMenu a:hover ul img.over,ul.pureCssMenu a:hover a:hover img.def{display:none} ul.pureCssMenu a:hover ul{display:block} ul.pureCssMenu span{ display:block; background-image:url(./images/arr_white.gif); background-position:right center; background-repeat: no-repeat; padding-right:12px;} ul.pureCssMenu li:hover>a>span{ background-image:url(./images/arrv_white.gif); } ul.pureCssMenu a:hover span{ _background-image:url(./images/arrv_white.gif)} ul.pureCssMenu ul span,ul.pureCssMenu a:hover table span{background-image:url(./images/arr_white.gif)} </style> <!-- End PureCSSMenu.com STYLE --> and here is the html, witch is probably not even needed in this posted but i figure i would include it.. i just want that menu centered inside my website. <!-- Start PureCSSMenu.com MENU --> <ul class="pureCssMenu pureCssMenum"> <li class="pureCssMenui"><a class="pureCssMenui" href="home.html" target="scare">home</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">about</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#"><span>haunts</span><![if gt IE 6]></a><![endif]><!--[if lte IE 6]><table><tr><td><![endif]--> <ul class="pureCssMenum"> <li class="pureCssMenui"><a class="pureCssMenui" href="#">2009</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">2010</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">2011</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">2012</a></li> </ul> <!--[if lte IE 6]></td></tr></table></a><![endif]--></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">studio</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#"><span>products</span><![if gt IE 6]></a><![endif]><!--[if lte IE 6]><table><tr><td><![endif]--> <ul class="pureCssMenum"> <li class="pureCssMenui"><a class="pureCssMenui" href="#">nightmares</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">hauntworks</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">atmosfears</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">frightwears</a></li> </ul> <!--[if lte IE 6]></td></tr></table></a><![endif]--></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#"><span>links</span><![if gt IE 6]></a><![endif]><!--[if lte IE 6]><table><tr><td><![endif]--> <ul class="pureCssMenum"> <li class="pureCssMenui"><a class="pureCssMenui" href="#">haunts</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">suppliers</a></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">resources</a></li> </ul> <!--[if lte IE 6]></td></tr></table></a><![endif]--></li> <li class="pureCssMenui"><a class="pureCssMenui" href="#">contact</a></li> </ul> <a id="pcm" href="http://www.purecssmenu.com/">CSS Drop Down Menu by PureCSSMenu.com</a> <!-- End PureCSSMenu.com MENU --> thanks in advance for your time.

    Read the article

  • Am I just not understanding TDD unit testing (Asp.Net MVC project)?

    - by KallDrexx
    I am trying to figure out how to correctly and efficiently unit test my Asp.net MVC project. When I started on this project I bought the Pro ASP.Net MVC, and with that book I learned about TDD and unit testing. After seeing the examples, and the fact that I work as a software engineer in QA in my current company, I was amazed at how awesome TDD seemed to be. So I started working on my project and went gun-ho writing unit tests for my database layer, business layer, and controllers. Everything got a unit test prior to implementation. At first I thought it was awesome, but then things started to go downhill. Here are the issues I started encountering: I ended up writing application code in order to make it possible for unit tests to be performed. I don't mean this in a good way as in my code was broken and I had to fix it so the unit test pass. I mean that abstracting out the database to a mock database is impossible due to the use of linq for data retrieval (using the generic repository pattern). The reason is that with linq-sql or linq-entities you can do joins just by doing: var objs = select p from _container.Projects select p.Objects; However, if you mock the database layer out, in order to have that linq pass the unit test you must change the linq to be var objs = select p from _container.Projects join o in _container.Objects on o.ProjectId equals p.Id select o; Not only does this mean you are changing your application logic just so you can unit test it, but you are making your code less efficient for the sole purpose of testability, and getting rid of a lot of advantages using an ORM has in the first place. Furthermore, since a lot of the IDs for my models are database generated, I proved to have to write additional code to handle the non-database tests since IDs were never generated and I had to still handle those cases for the unit tests to pass, yet they would never occur in real scenarios. Thus I ended up throwing out my database unit testing. Writing unit tests for controllers was easy as long as I was returning views. However, the major part of my application (and the one that would benefit most from unit testing) is a complicated ajax web application. For various reasons I decided to change the app from returning views to returning JSON with the data I needed. After this occurred my unit tests became extremely painful to write, as I have not found any good way to write unit tests for non-trivial json. After pounding my head and wasting a ton of time trying to find a good way to unit test the JSON, I gave up and deleted all of my controller unit tests (all controller actions are focused on this part of the app so far). So finally I was left with testing the Service layer (BLL). Right now I am using EF4, however I had this issue with linq-sql as well. I chose to do the EF4 model-first approach because to me, it makes sense to do it that way (define my business objects and let the framework figure out how to translate it into the sql backend). This was fine at the beginning but now it is becoming cumbersome due to relationships. For example say I have Project, User, and Object entities. One Object must be associated to a project, and a project must be associated to a user. This is not only a database specific rule, these are my business rules as well. However, say I want to do a unit test that I am able to save an object (for a simple example). I now have to do the following code just to make sure the save worked: User usr = new User { Name = "Me" }; _userService.SaveUser(usr); Project prj = new Project { Name = "Test Project", Owner = usr }; _projectService.SaveProject(prj); Object obj = new Object { Name = "Test Object" }; _objectService.SaveObject(obj); // Perform verifications There are many issues with having to do all this just to perform one unit test. There are several issues with this. For starters, if I add a new dependency, such as all projects must belong to a category, I must go into EVERY single unit test that references a project, add code to save the category then add code to add the category to the project. This can be a HUGE effort down the road for a very simple business logic change, and yet almost none of the unit tests I will be modifying for this requirement are actually meant to test that feature/requirement. If I then add verifications to my SaveProject method, so that projects cannot be saved unless they have a name with at least 5 characters, I then have to go through every Object and Project unit test to make sure that the new requirement doesn't make any unrelated unit tests fail. If there is an issue in the UserService.SaveUser() method it will cause all project, and object unit tests to fail and it the cause won't be immediately noticeable without having to dig through the exceptions. Thus I have removed all service layer unit tests from my project. I could go on and on, but so far I have not seen any way for unit testing to actually help me and not get in my way. I can see specific cases where I can, and probably will, implement unit tests, such as making sure my data verification methods work correctly, but those cases are few and far between. Some of my issues can probably be mitigated but not without adding extra layers to my application, and thus making more points of failure just so I can unit test. Thus I have no unit tests left in my code. Luckily I heavily use source control so I can get them back if I need but I just don't see the point. Everywhere on the internet I see people talking about how great TDD unit tests are, and I'm not just talking about the fanatical people. The few people who dismiss TDD/Unit tests give bad arguments claiming they are more efficient debugging by hand through the IDE, or that their coding skills are amazing that they don't need it. I recognize that both of those arguments are utter bullocks, especially for a project that needs to be maintainable by multiple developers, but any valid rebuttals to TDD seem to be few and far between. So the point of this post is to ask, am I just not understanding how to use TDD and automatic unit tests?

    Read the article

  • interactive login on cgi script

    - by raindrop18
    I am new for perl-cgi script. and my objective is to create user/pass interactive script to log and get information from multiple device at once. instead of add the user/pass credential on the script itself. since i am new if some one show me how to write the interactive part of the script. thanks much!!! here is the current code usr/local/bin/perl -wl use CGI ':standard'; use Net::Telnet::Cisco; ### set the error fields to nulls $selerror = ""; ### Input from the screen - make sure data was input if (param() and param('Switches') ne "" and (param('Mac') ne "" or param('Interface Description') ne "" or param('VLAN') ne "" )) { ### Put the input devices into an array. @devices = param('Switches'); ### format the header data print header(); print start_html(-title=>"ShowSwitches",-BGCOLOR=>'aqua'); print "\n",h1("<CENTER>Show Switches</CENTER>"); print "\n",hr(),"\n"; ### Go thru the device array. foreach(@devices) { $error_msg = ""; $TAC_login_error = ""; $open_error = ""; $retry_open_error = ""; $prompt_error = ""; $password_error = ""; ### Take input host and use to send to Telnet $host = $_; $session = Net::Telnet::Cisco->new(Errmode => 'return', Timeout => 30); ### Connect to the host $session->open(Host =>"$host", Timeout => 15); $open_error = $session->errmsg; ### Login with TACACS if host can be connected to if ($open_error eq "") { $session->login('USER', 'PASS'); $TAC_login_error = $session->errmsg; ### Login with TACACS failed - try standard login if ($TAC_login_error ne "") { ### Connect to host $session->open(Host =>"$host", Timeout => 15); $retry_open_error = $session->errmsg; ### Wait for password prompt - multiple matches - devices may have different device prompts. if ($retry_open_error eq "") { $session->waitfor(Match => '/Password:.*$/', Match => '/Enter password:.*$/', Timeout => 20); $prompt_error = $session->errmsg; if ($prompt_error eq "") { ### Input password $session->print('getmeout'); $password_error = $session->errmsg; $session->waitfor('/.*>$/'); $password_error = $session->errmsg; } } } } ### No errors, then issue "show commands". if ($open_error eq "" and ($TAC_login_error eq "" or $retry_open_error eq "") and $prompt_error eq "" and $password_error eq "") { ### Show Mac if (param('Mac')) { $cmd = 'sh mac'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show mac - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } ### Show Interface Description if (param('Interface Description')) { $cmd = 'sh interface description'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show mac - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } ### Show VLAN if (param('VLAN')) { $cmd = 'sh vlan'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show vlan - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } } elsif ($TAC_login_error ne "" and $password_error ne "") { $error_msg = "Error - $host " . $TAC_login_error . ' - possible incorrect TACACS or standard password parameters on device.'; } elsif ($open_error ne "") { $error_msg = "Error - $host " . $open_error . ' - cannot connect to host - is it down??'; } elsif ($prompt_error ne "") { $error_msg = "Error - $host " . $prompt_error . ' - password prompt not recognized - invalid TACACS (or user) password.'; } elsif ($password_error ne "") { $error_msg = "Error - $host " . $password_error . ' - possible incorrect user/password parameters on device.'; } if ($error_msg ne "" ) { print b($error_msg),(br); print hr(),"\n"; } print hr(),"\n"; print end_html(),"\n"; } } else { ### No Show command was selected. if (param('Submit') and param('Mac') eq "" and param('Interface Description') eq "" and param('VLAN') eq "" ) { $selerror = 'No Show Displays were selected. Try again please!!'; } elsif ### No switch was selected. (param('Submit') and param('Switches') eq "") { $selerror = 'No devices were selected. Try again please!!'; } ### This formats the initial Show Web page. print header(-Pragma='no-cache'), start_html(-title=>"Show Displays",-BGCOLOR=>'aqua'), h1("<CENTER>Show Switches</CENTER>"),hr(), start_form(), b("Select Show Commands:"), br(), br(), checkbox(-name=>'Mac'), checkbox(-name=>'Interface Description'), checkbox(-name=>'VLAN'), br(),br(),hr(),br(), b("Select One or More Devices:"), br(), br(), scrolling_list (-name => 'Switches', -default=> "NONE", -values => ['cs6a', 'cs7a', 'cs7b', 'cs8b', 'cs9a', 'c9b', 'csa' ], -multiple => 'true', -size => 7, ), p(submit('Submit'),reset('Reset')), b($selerror), end_form(),hr(), end_html(); } #

    Read the article

  • how can i have a working dropdownlist with links from a csv in php

    - by Mark Dekker
    I have a website that loads a CSV, divides it into parts, and shows these parts. There are 7 parts, and since it is for a music store it is sliced like this: the name of the product the subname the price the stock in one shop the stock of the other shop the group name the brandname What i have now is that it shows 12 products on 1 page, with a next and previous link on top of the page. The pages are made with the group name, every group has it's own page, so you have a drums page, guitar page, speaker page. That all works great. What i programmed in there is a dropdownlist, it drops down a list of brandnames, which should narrow the search for a person who is looking at the products. Problem is right now, that the dropdown menu works, i see the brands, but they are NONE clickable, only the brands that are currently on the page are shown, so NOT all the brands from that group are shown, only the 12 that are currently showing, when you press next, it shows 12 more brands, but i want them to be shown right on the start. And the third problem is, when it is showing the brands, it shows them double or triple, depending on how many products have the same brand. Is there a way what i want, with this code as a basis ? <html> <body bgcolor=#E2E965 link=black vlink=black alink=black text=#D5DF23> <style type="text/css"> #nav, #nav ul { padding: 0; margin: 0; list-style: none; } #nav li { float: left; width: 120px; } #nav ul { position: absolute; width: 120px; left: -1000px; } #nav li:hover ul { left: auto; } <!-- a {text-decoration:none} //--> body { scrollbar-arrow-color: #E2E965; scrollbar-face-color: #D7182A; scrollbar-highlight-color: #000000; scrollbar-3dlight-color: #D6DF23; scrollbar-shadow-color: #00000; scrollbar-darkshadow-color: #00000; scrollbar-track-color: #D6DF23; } input:link {text-decoration: none; color: #E2E965;} input:visited {text-decoration: none; color: #E2E965;} input:active {text-decoration: none; color: #E2E965;} .spacer_black { margin: 0px; padding: 0px; border: 5px; height: 2px; width: 100%; line-height: 0px; font-size: 0px; background-color: #000000;} </style> <table width=800 border=0><td> </html> <?PHP $offset = isset($_GET['offset'])?$_GET['offset']:0; $LinesToDisplay = 12; $row = $offset + $LinesToDisplay; $row2 = $offset - $LinesToDisplay; $file_handle = fopen("web.txt", "rb"); error_reporting( E_ALL ); // DEBUGGING $SelectArray=array(); while ((($parts = fgetcsv($file_handle,4096,"|")) !== FALSE) && ($LinesToDisplay > 0) && (!feof($file_handle))) { //new code //skip first $offset lines $num = count($parts[6]); $SelectArray[]=$parts[6]; if ($parts[5] == 9999) { if ($offset-- > 0) {continue;} $parts[0] = ucwords(strtolower($parts[0])); $parts[1] = ucwords(strtolower($parts[1])); ?> <td> <?php echo "<table BACKGROUND='background.jpg' border=0 width=250><td width='243' height='105'>"; echo "<font size=-1 face='helvetica' color=#812990><b>$parts[0]</b></font>"; echo "<i>"; ?> <html> <div onMouseOver="this.style.color = 'black';" onMouseOut="this.style.color = '#D5DF23';"> </html><?php echo "<font size=2>-$parts[1]</font>"; echo "</div></i>"; ?><html><a href="#" title="Koop nu de <?php echo $parts[0]; ?>" onClick="window.open('form.php?p=<?php echo urlencode($parts[0]); ?>','popuppage','width=400,height=400,top=250,left=250,resizable=0,statusbar=0,titlebar=yes,toolbar=no,scrollbars=no,location=no,directories=no');"> <div><img src='ster.jpg' border=0 width='46' align='right'></a> <a href="#"><img src='envelope.jpg' border=0 width='46' align='right'title="Heeft u een vraag over <?php echo $parts[0]; ?>" onClick="window.open('vraag.php?p=<?php echo urlencode($parts[0]); ?>','popuppage','width=400,height=400,top=250,left=250,resizable=0,statusbar=0,titlebar=yes,toolbar=no,scrollbars=no,location=no,directories=no');"> <div></a> <TABLE BORDER='0' cellpadding='0' CELLSPACING='0'> <TR> <TD WIDTH='70' HEIGHT='20' BACKGROUND='pricebackground.jpg' VALIGN='bottom'> <center> <font size=2 color=white face='helvetica'> <b></html> <?php echo "€ $parts[2]"; ?> </b> </td> </tr> </table> <?php echo "<b><font size=3 color=#D7182A>Op Voorraad In:<br></font>"; echo ("<font color=black> Amsterdam </font>"); if ( $parts[3] >= 1 ) echo ("<IMG SRC =green.gif>").""; if ( $parts[3] <= 0 ) echo ("<IMG SRC =red.gif>").""; echo ("<font color=black> Utrecht </font>"); if ( $parts[4] >= 1 ) echo ("<IMG SRC =green.gif>")."</td></table></b><p style='margin:9px;'>"; if ( $parts[4] <= 0 ) echo ("<IMG SRC =red.gif>")."</td></table></b><p style='margin:9px;'>"; $LinesToDisplay--; if ($LinesToDisplay/3==intval($LinesToDisplay/3)) { echo "<tr><td>"; } }} fclose($file_handle); ?> <tr align=right> <select style="background-color: #FFFFFF; color: #000000; font-family: Arial; font-weight: none; font-size: 12; width: 150px; "> <?php $i=1; foreach ($SelectArray as $val){ echo "<option value=\"$i\">$val</option>\n"; $i++; } ?> </select> <font color=black><body alink=black vlink=black link=black text=black> <center><a href="occasiona.php?offset=<?php echo $row2; ?>" align=center>&laquo; previous</a> || <a href="occasiona.php?offset=<?php echo $row; ?>">next &raquo;</a></table></html>

    Read the article

< Previous Page | 720 721 722 723 724 725 726 727  | Next Page >