Search Results

Search found 25255 results on 1011 pages for 'ask a lawyer'.

Page 73/1011 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• Using the Onboard VGA output with a PCIe video card. Both nVidia

  - by sebikul

  I have 2 video cards, one On board, a nVidia 6150SE nForce 430 and a PCIe nVidia GeForce GT 220 1GB DDR2 RAM I have already configured the PCIe card to use the dual monitor feature, using the VGA and HDMI ports, but now I want to add a third monitor, using the On board VGA port I have managed to enable the On board graphics processor, which is taking 400MB of ram, but I cant manage to use it, nvidia-settings does not detect it, like it's not usable (but is there) My questions are the following: How can I manage to get the On board VGA display to work together with the PCIe graphics card? If possible, how can I recover those 400 MB the on board card is taking (even without being used) or how can I get it to use the PCIe card available memory? System Details: Linux 2.6.35-28-generic i686 Ubuntu 10.10 (All updates installed) NVIDIA Driver Version: 260.19.06 (Official) If more info is needed please let me know. Here is the lspci output when the On board card is disabled: 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:01.3 Co-processor: nVidia Corporation MCP61 SMU (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 02:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) And this is when both are enabled: 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:01.3 Co-processor: nVidia Corporation MCP61 SMU (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 02:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) Output of lshw -class display: *-display description: VGA compatible controller product: GT216 [GeForce GT 220] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:02:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:df000000-dfffffff memory:c0000000-cfffffff memory:da000000-dbffffff ioport:ef80(size=128) memory:def80000-deffffff *-display description: VGA compatible controller product: C61 [GeForce 6150SE nForce 430] vendor: nVidia Corporation physical id: d bus info: pci@0000:00:0d.0 version: a2 width: 64 bits clock: 66MHz capabilities: pm msi vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:22 memory:dd000000-ddffffff memory:b0000000-bfffffff memory:dc000000-dcffffff memory:deb40000-deb5ffff If what I'm looking for is not possible, please tell me, so I can disable the On board card and recover those 400MB of wasted RAM Thanks for your help!

  Read the article

• How to remove old Linux kernel modules »tp_smapi«?

  - by user43816

  ~$ locate tp_smapi /lib/modules/3.0.0-19-generic/updates/dkms/tp_smapi.ko /lib/modules/3.2.0-26-generic/updates/dkms/tp_smapi.ko /lib/modules/3.2.0-29-generic/updates/dkms/tp_smapi.ko /usr/src/tp-smapi-0.41/tp_smapi.c /var/lib/dkms/tp-smapi/0.41/3.0.0-19-generic/x86_64/module/tp_smapi.ko /var/lib/dkms/tp-smapi/0.41/3.2.0-26-generic/x86_64/module/tp_smapi.ko /var/lib/dkms/tp-smapi/0.41/3.2.0-29-generic/x86_64/module/tp_smapi.ko /var/lib/dkms/tp-smapi/0.41/build/tp_smapi.c' How to remove the 2 old Linux kernel modules from kernels 3.0.0-19 und 3.2.0-26? ~$ man dkms "'dkms remove [module/module-version]' removes a module/version combination from a tree.' What is a "[module/module-version]", please? Please notice: I do not want to remove old Linux kernel modules tp_smapi from a tree but I'd like to remove old Linux kernel modules from my Ubuntu 12.04.1 computer.

  Read the article

• Couldn't pass the signin screen

  - by Amokrane

  I have an issue here with my computer using ubuntu 10.10 on a 64 bits machine. When I start it, I have the login screen, I enter my credentials but instead of starting the session it reloads the login screen again. I checked the disc using fsck and it seems clean. How should I proceed to diagnose and repair this issue? Thanks! [Edit] I went to the log files, this is what I got: auth.log pam_unix (gdm:session): session opened for user amokrane by (uid=0) pam_ck_connector (gdm:session): nox11 mode, ignoring PAM_TTY :0 pam_unix (gdm:session) :session closed for user amokrane messages.log No ACPI video bus found I also took a shot with my camera of the black screen that appears between the two login screens, it says something like: fsck from util-linux-ng 2.17.2 /dev/sdc4 : propre, xxxx files, xxxx blocs Starting AppArmor profiles Skipping profiles in /etc/apparmor.d/disable: usr.bin.firefox Setting sensors limits Starting postgreSQL ... /var/log/Xorg.0.log [ 25.375] (II) intel(0): Modeline "1920x1080"x60.0 172.80 ... [ 28.850] (II) Power Button: Close [ 28.850] (II) UnloadModule: "evdev" [ 29.910] (II) Power Button: Close [ 28.910] (II) UnloadModule: "evdev" [ 28.941] (II) AT Translated Set 2 keyboard: Close [ 29.000] (II) ImPS/2 Generic Wheel Mouse: Close [ 29.000] (II) UnloadModule: "evdev" [ 29.039] ddxSigGiveUp: Closing log Update I tried the following: Ctrl-Alt-F1 on the login screen (to runt the console). sudo pkill startx sudo rm /tmp/.X0-locl startx But it tells me that the x server is already running.

  Read the article

• Having problems booting xubuntu after installation

  - by lagaffenewbe

  I'm newbie with ubuntu, I tried to install ubuntu, at the beginning xubuntu work for the first upgrade to xubuntu 12.04, but after the reboot, no winxp media center ether Xubuntu won't start and I have a screen Ctrl+Alt+Del nothing else. I read a little about, maybe the sata enabled on the bios. What is the problem and can it be fixed or do I have to remove xubuntu. Partition is : 100gb xubuntu 220gb winxp I have an external drive 1 tb Thanks for the help.

  Read the article

• Is there a Generic USB TouchScreen Driver 12.04?

  - by lbjoum

  Is there a Generic USB TouchScreen Driver 12.04? Device 03eb:201c I've been looking for 4 days solid (not very skilled) and can't find a solution. I have a generic tablet: C97- Atom N2600 9.7" 2GB 32GB Bluetooth WiFi WebCam Ext.3G Windows 7 Tablet PC Using 12.04 and cannot find a driver. I installed android and the touchscreen works but still lots of other bugs. Oh well, stuck with Windows 7 and not happy about it. Will keep trying, but too much time wasted already. If you have a solution I would love to try it. ubuntu@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0cf2:6238 ENE Technology, Inc. Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 001 Device 005: ID 05e1:0100 Syntek Semiconductor Co., Ltd 802.11g + Bluetooth Wireless Adapter Bus 001 Device 006: ID 090c:3731 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) (from Windows: HID\VID_03EB&PID_201C\6&5F38127&0&0000 USB\VID_03EB&PID_201C\5&193ADADC&1&2 ) Bus 001 Device 007: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09 Bus 001 Device 008: ID 192f:0916 Avago Technologies, Pte. ubuntu@ubuntu:~$ sudo lsusb -v Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 32 idVendor 0x03eb Atmel Corp. idProduct 0x201c at90usbkey sample firmware (HID mouse) bcdDevice 45.a2 iManufacturer 1 CDT iProduct 2 9.75 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x00 (Missing must-be-set bit!) (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 177 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 5 Device Status: 0x00fb Self Powered Remote Wakeup Enabled Debug Mode ubuntu@ubuntu:~$ sudo lshw ubuntu description: Notebook product: To be filled by O.E.M. (To be filled by O.E.M.) vendor: To be filled by O.E.M. version: To be filled by O.E.M. serial: To be filled by O.E.M. width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=To be filled by O.E.M. sku=To be filled by O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: Tiger Hill vendor: INTEL Corporation physical id: 0 version: To be filled by O.E.M. serial: To be filled by O.E.M. slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 4.6.5 date: 08/24/2012 size: 64KiB capacity: 960KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 1600MHz capacity: 1600MHz width: 64 bits clock: 400MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm arat configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 28 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 800 MHz (1.2 ns) vendor: 69 physical id: 1 serial: 00000210 slot: DIMM1 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 1600MHz capabilities: ht configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical *-pci description: Host bridge product: Atom Processor D2xxx/N2xxx DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz *-display UNCLAIMED description: VGA compatible controller product: Atom Processor D2xxx/N2xxx Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 32 bits clock: 33MHz capabilities: pm msi vga_controller bus_master cap_list configuration: latency=0 resources: memory:dfe00000-dfefffff ioport:f100(size=8) *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:42 memory:dff00000-dff03fff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:80000000-801fffff ioport:80200000(size=2097152) *-usb:0 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:f0a0(size=32) *-usb:1 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:f080(size=32) *-usb:2 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:f060(size=32) *-usb:3 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:f040(size=32) *-usb:4 description: USB controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:dff05000-dff053ff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: N10/ICH7 Family SATA Controller [AHCI mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:f0f0(size=8) ioport:f0e0(size=4) ioport:f0d0(size=8) ioport:f0c0(size=4) ioport:f020(size=16) memory:dff04000-dff043ff *-disk description: ATA Disk product: BIWIN SSD physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 1206 serial: 123403501060 size: 29GiB (32GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=8fbe402b *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 249bde5d-8246-9a40-88c7-2d5e3bcaf692 size: 19GiB capacity: 19GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-04-04 02:27:51 filesystem=ntfs state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: de12d40f-d5ca-8642-b306-acd9349fda1a size: 10231MiB capacity: 10GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-04-04 01:52:26 filesystem=ntfs state=clean *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:f000(size=32) *-scsi:0 physical id: 2 bus info: usb@1:1 logical name: scsi4 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/sdb size: 29GiB (31GB) capabilities: partitioned partitioned:dos configuration: signature=00017463 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@4:0.0.0,1 logical name: /dev/sdb1 logical name: /cdrom version: FAT32 serial: 129b-4f87 size: 29GiB capacity: 29GiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted *-scsi:1 physical id: 3 bus info: usb@1:3.1 logical name: scsi6 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@6:0.0.0 logical name: /dev/sdc size: 7400MiB (7759MB) capabilities: partitioned partitioned:dos configuration: signature=c3072e18 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@6:0.0.0,1 logical name: /dev/sdc1 logical name: /media/JOUM8G version: FAT32 serial: e676-9311 size: 7394MiB capacity: 7394MiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat label=Android mount.fstype=vfat mount.options=rw,nosuid,nodev,relatime,uid=999,gid=999,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro state=mounted ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Plus More Enterprise LTD. USB-compliant keyboard id=10 [slave pointer (2)] ? ? USB Optical Mouse id=11 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Sleep Button id=8 [slave keyboard (3)] ? Plus More Enterprise LTD. USB-compliant keyboard id=9 [slave keyboard (3)] ? USB 2.0 Webcam - Front id=12 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=13 [slave keyboard (3)] ubuntu@ubuntu:~$

  Read the article

• very long boot up with Ubuntu 10.04.4

  - by wt70707

  I installed Ubuntu 10.04.3 on Atom. Then I do the update and upgrade with: #apt-get update #apt-get upgrade #apt-get dist-upgrade The system can boot up now but in almost 2 minutes. After power on and system test, it will stop at "Verifying DMI pool data" for 10 seconds before the GRUB menu comes up. Then after the choosing of one item, to the start up of OS there is 100 seconds of black screen. The start up after that is normal and the operations in the system is also normal. I am concerned with if it is of hardware problem, or just some problem with the kernel. Also I want to know after "Verifying DMI pool data" what is done? And after we choose an item in GRUB menu, what does the system do? And where can I see the procedure of the whole boot up? The /var/log/boot.log is too simple, and this is it: fsck from util-linux-ng 2.17.2 fsck from util-linux-ng 2.17.2 /dev/mmcblk0p5: clean, ...... /dev/mmcblk0p1: clean, ...... * Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox OK] * Setting sensors limits OK]

  Read the article

• Recover Ubuntu grub without LiveCD - Can't boot with Ubuntu LiveCD after install Windows

  - by Paulocoghi

  I installed Windows after installing Ubuntu. But Ubuntu is still intact in its partition. I'm trying to run the Ubuntu LiveCD to recover grub, but the LiveCD no longer works. It stops the boot process and does not load completely. I can not run Ubuntu in live mode to recover grub. Is there any way to recover the grub/grub2 without the LiveCD? Edit: [Important] I've downloaded a new Ubuntu 10.10 ISO. I also did the MD5 check. It's all right. Then, I recorded this .iso and still can not load the LiveCD to the end.

  Read the article

• "corrupted filesystem tarfile - corrupted package archive" error

  - by Justin

  I was trying to install a program and it said that my dependencies were unmet, and that I should run, sudo apt-get -f install. I have moved everything I didn't need in /etc/apt/sources.list.d/ into the trash. My source.list is all Natty while I am running Oneiric. So maybe I need a new source.list? But here are the things I have: justin@justin-000:~$ sudo apt-get -f install [sudo] password for justin: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: linux-image-3.0.0-13-generic Suggested packages: fdutils linux-doc-3.0.0 linux-source-3.0.0 linux-tools The following NEW packages will be installed: linux-image-3.0.0-13-generic 0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded. 2 not fully installed or removed. Need to get 0 B/36.5 MB of archives. After this operation, 117 MB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 270736 files and directories currently installed.) Unpacking linux-image-3.0.0-13-generic (from .../linux-image-3.0.0-13- generic_3.0.0-13.22_i386.deb) ... Done. dpkg: error processing /var/cache/apt/archives/linux-image-3.0.0-13 generic_3.0.0-13.22_i386.deb (--unpack): corrupted filesystem tarfile - corrupted package archive No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.0.0-13-generic /boot/vmlinuz-3.0.0-13-generic run-parts: executing /etc/kernel/postrm.d/zz-extlinux 3.0.0-13-generic /boot/vmlinuz-3.0.0-13-generic P: Checking for EXTLINUX directory... found. P: Writing config for /boot/vmlinuz-3.0.0-12-generic... P: Writing config for /boot/vmlinuz-2.6.38-11-generic... P: Installing debian theme... done. run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.0.0-13-generic /boot/vmlinuz-3.0.0-13-generic Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.0.0-13-generic_3.0.0-13.22_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) justin@justin-000:~$ sudo apt-get update justin@justin-000:~$ sudo apt-get update Ign dl.google.com stable InRelease Ign dl.google.com stable InRelease Get:1dl.google.com stable Release.gpg [198 B] Ign us.archive.ubuntu.com oneiric InRelease Ign us.archive.ubuntu.com oneiric-security InRelease Ign http://us.archive.ubuntu.com oneiric-updates InRelease Get:2 dl.google.com stable Release.gpg [198 B] Get:3 dl.google.com stable Release [1,347 B] Get:4 dl.google.com stable Release [1,338 B] Hit us.archive.ubuntu.com oneiric Release.gpg Hit us.archive.ubuntu.com oneiric-security Release.gpg Get:5/dl.google.com stable/main i386 Packages [1,220 B] Hit tp://us.archive.ubuntu.com oneiric-updates Release.gpg Ign tp://dl.google.com stable/main TranslationIndex Get:6 tp://dl.google.com stable/main i386 Packages [464 B] Ign ttp://ppa.launchpad.net oneiric InRelease Hit ttp://us.archive.ubuntu.com oneiric Release Ign ttp://ppa.launchpad.net oneiric InRelease Ign ttp://dl.google.com stable/main TranslationIndex Hit ttp://ppa.launchpad.net oneiric Release.gpg Hit ttp://us.archive.ubuntu.com oneiric-security Release Hit ttp://ppa.launchpad.net oneiric Release.gpg Hit ttp://us.archive.ubuntu.com oneiric-updates Release Hit ttp://us.archive.ubuntu.com oneiric/main Sources Hit ttp://us.archive.ubuntu.com oneiric/restricted Sources Hit ttp://us.archive.ubuntu.com oneiric/universe Sources Hit ttp://us.archive.ubuntu.com oneiric/multiverse Sources Hit ttp://us.archive.ubuntu.com oneiric/main i386 Packages Hit ttp://ppa.launchpad.net oneiric Release Hit ttp://us.archive.ubuntu.com oneiric/restricted i386 Packages Hit ttp://us.archive.ubuntu.com oneiric/universe i386 Packages Hit ttp://us.archive.ubuntu.com oneiric/multiverse i386 Packages Hit ttp://us.archive.ubuntu.com oneiric/main TranslationIndex Hit ttp://us.archive.ubuntu.com oneiric/multiverse TranslationIndex Hit ://us.archive.ubuntu.com oneiric/restricted TranslationIndex Hit htp://us.archive.ubuntu.com oneiric/universe TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-security/main Sources Hit ttp://us.archive.ubuntu.com oneiric-security/restricted Sources Hit ttp://ppa.launchpad.net oneiric Release Hit ttp://us.archive.ubuntu.com oneiric-security/universe Sources Hit tp://us.archive.ubuntu.com oneiric-security/multiverse Sources Hit htp://us.archive.ubuntu.com oneiric-security/main i386 Packages Hit tp://us.archive.ubuntu.com oneiric-security/restricted i386 Packages Hit ttp://us.archive.ubuntu.com oneiric-security/universe i386 Packages Hit ttp://us.archive.ubuntu.com oneiric-security/multiverse i386 Packages Hit htp://ppa.launchpad.net oneiric/main Sources Hit ttp://ppa.launchpad.net oneiric/main i386 Packages Ign htp://ppa.launchpad.net oneiric/main TranslationIndex Hit ttp://us.archive.ubuntu.com oneiric-security/main TranslationIndex Hit ttp://us.archive.ubuntu.com oneiric-security/multiverse TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-security/restricted TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-security/universe TranslationIndex Ign htp://dl.google.com stable/main Translation-en_US Hit htp://us.archive.ubuntu.com oneiric-updates/main Sources Hit htp://us.archive.ubuntu.com oneiric-updates/restricted Sources Hit tp://us.archive.ubuntu.com oneiric-updates/universe Sources Hit htp://us.archive.ubuntu.com oneiric-updates/multiverse Sources Hit htp://us.archive.ubuntu.com oneiric-updates/main i386 Packages Ign htp://dl.google.com stable/main Translation-en Hit ttp://ppa.launchpad.net oneiric/main Sources Hit htp://ppa.launchpad.net oneiric/main i386 Packages Hit ttp://us.archive.ubuntu.com oneiric-updates/restricted i386 Packages Ign htp://dl.google.com stable/main Translation-en_US Ign htp://ppa.launchpad.net oneiric/main TranslationIndex Hit hp://us.archive.ubuntu.com oneiric-updates/universe i386 Packages Hit ttp://us.archive.ubuntu.com oneiric-updates/multiverse i386 Packages Hit htp://us.archive.ubuntu.com oneiric-updates/main TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-updates/multiverse TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-updates/restricted TranslationIndex Ign htp://dl.google.com stable/main Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/universe TranslationIndex Hit ttp://us.archive.ubuntu.com oneiric/main Translation-en Hit ttp://us.archive.ubuntu.com oneiric/multiverse Translation-en Hit htp://us.archive.ubuntu.com oneiric/restricted Translation-en Hit htp://us.archive.ubuntu.com oneiric/universe Translation-en Hit htp://us.archive.ubuntu.com oneiric-security/main Translation-en Hit hp://us.archive.ubuntu.com oneiric-security/multiverse Translation-en Hit htp://us.archive.ubuntu.com oneiric-security/restricted Translation-en Hit htp://us.archive.ubuntu.com oneiric-security/universe Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/main Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/multiverse Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/restricted Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/universe Translation-en Ign htp://ppa.launchpad.net oneiric/main Translation-en_US Ign htt://ppa.launchpad.net oneiric/main Translation-en Ign htp://ppa.launchpad.net oneiric/main Translation-en_US Ign htp://ppa.launchpad.net oneiric/main Translation-en Fetched 4,765 B in 2s (2,158 B/s) Reading package lists... Done justin@justin-000:~$

  Read the article

• What to do when:"The following packages have unmet dependencies"

  - by André Izquierdo

  When I try to install Wine, PlayonLinux, and some other programs, I get the following message: At the terminal: The following packages have unmet dependencies: wine : Depends: wine1.5 but it is not going to be installed E: Unable to correct problems, you have held broken packages. At the software center: Package dependencies cannot be resolved This error could be caused by required additional software packages which are missing or not installable. Furthermore there could be a conflict between software packages which are not allowed to be installed at the same time. I already tried installing them with "aptitude" and failed. I am running Ubuntu 12.10 Please help! I've had this problem for a while now and don't know what to do!

  Read the article

• My laptop can not access internet after setup bridge with wired NIC and wireless NIC

  - by Victor S

  I setup a bridge using wired NIC and wireless NIC in order to make wireless NIC as a Wi-Fi AP to share wired internet access, after setup successfully, the Wi-Fi AP works as my expectation, but my laptop can not access internet, please give me a hand. Thanks. My hostapd.conf $ cat hostapd.conf interface=wlan0 bridge=br0 driver=nl80211 ssid=myAP hw_mode=g channel=11 dtim_period=1 rts_threshold=2347 fragm_threshold=2346 macaddr_acl=0 auth_algs=3 ieee80211n=0 wpa=3 wpa_passphrase=PassWord wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP Setup steps: $ sudo killall hostapd hostapd: no process found $ sudo hostapd -B hostapd.conf Configuration file: hostapd.conf Using interface wlan0 with hwaddr 00:26:5e:e8:4f:8e and ssid 'myAP' $ sudo brctl addbr br0 device br0 already exists; can't create bridge with the same name $ sudo ifconfig eth0 0.0.0.0 up $ sudo ifconfig wlan0 0.0.0.0 up $ sudo brctl addif br0 eth0 $ sudo brctl addif br0 wlan0 device wlan0 is already a member of a bridge; can't enslave it to bridge br0. $ sudo ifconfig br0 192.168.1.110 netmask 255.255.255.0 $ sudo route add default gw 192.168.1.1

  Read the article

• Fixing unbootable installation on LVM root from Desktop LiveCD

  - by intuited

  I just did an installation from the 10.10 Desktop LiveCD, making the root volume an LVM LV. Apparently this is not supported; I managed it by taking these steps before starting the GUI installer app: installing the lvm2 package on the running system creating an LVM-type partition on the system hard drive creating a physical volume, a volume group and a root LV using the LVM tools. I also created a second LV for /var; this I don't think is relevant. creating a filesystem (ext4) on each of the two LVs. After taking these steps, the GUI installer offered the two LVs as installation targets; I gladly accepted, also putting /boot on a primary partition separate from the LVM partition. Installation seemed to go smoothly, and I've verified that both the root and var volumes do contain acceptable-looking directory structures. However, booting fails; if I understood correctly what happened, I was dropped into a busybox running in the initrd filesystem. Although I haven't worked through the entirety of the grub2 docs yet, it looks like the entry that tries to boot my new system is correct: menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos3)' search --no-floppy --fs-uuid --set $UUID_OF_BOOT_FILESYSTEM linux /vmlinuz-2.6.35-22-generic root=/dev/mapper/$LVM_VOLUME_GROUP-root ro quiet splash initrd /initrd.img-2.6.35-22-generic } Note that $VARS are replaced in the actual grub.cfg with their corresponding values. I rebooted back into the livecd and have unpacked the initrd image into a temp directory. It looks like the initrd image lacks LVM functionality. For example, if I'm reading /usr/share/initramfs-tools/hooks/lvm2 (installed with lvm2 on the livecd-booted system, not present on the installed one) correctly, an lvm executable should be situated in /sbin; that is not the case. What's the best way to remedy this situation? I realize that it would be easier to just use the alternate install CD, which apparently supports LVM, but I don't want to wait for it to download and then have to reinstall.

  Read the article

• How do I install Geomatica?

  - by Chethan S.

  I wanted to try the latest version(trial) of Geomatica, Geomatica 2012 on Ubuntu 11.10 beta. When I tried to run the bin file I got a whole list of dependencies. It also seems that it is a RPM package. Instead of going through each entry manually, is there any easy way to search and install a list of dependencies? Here is the list what I got - rpm: RPM should not be used directly install RPM packages, use Alien instead! rpm: However assuming you know what you are doing... error: Failed dependencies: glibc >= 2.9 is needed by geomatica-2012-12.0-0.x86_64 libstdc++43 is needed by geomatica-2012-12.0-0.x86_64 libgcc43 is needed by geomatica-2012-12.0-0.x86_64 libgomp43 is needed by geomatica-2012-12.0-0.x86_64 libgfortran43 is needed by geomatica-2012-12.0-0.x86_64 openmotif-libs >= 2.3.1 is needed by geomatica-2012-12.0-0.x86_64 /bin/sh is needed by geomatica-2012-12.0-0.x86_64 libatk-1.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libcairo.so.2()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libcrypto.so.0.9.8()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libcrypt.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libc.so.6()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libc.so.6(GLIBC_2.2.5)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libc.so.6(GLIBC_2.3.2)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libc.so.6(GLIBC_2.3.4)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libc.so.6(GLIBC_2.3)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libc.so.6(GLIBC_2.7)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libdl.so.2()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libdl.so.2(GLIBC_2.2.5)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libexpat.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libfontconfig.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgcc_s.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgcc_s.so.1(GCC_3.0)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgcc_s.so.1(GCC_4.0.0)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgdk_pixbuf-2.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgdk-x11-2.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgd.so.2()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgfortran.so.3()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgfortran.so.3(GFORTRAN_1.0)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgio-2.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libglib-2.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libGL.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgmodule-2.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgobject-2.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgomp.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgomp.so.1(GOMP_1.0)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgomp.so.1(OMP_1.0)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgthread-2.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libgtk-x11-2.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libjpeg.so.62()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libm.so.6()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libm.so.6(GLIBC_2.2.5)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libnsl.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpango-1.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpangocairo-1.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpangoft2-1.0.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpng12.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpng12.so.0(PNG12_0)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpthread.so.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpthread.so.0(GLIBC_2.2.5)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpthread.so.0(GLIBC_2.3.2)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpthread.so.0(GLIBC_2.3.4)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libpython2.6.so.1.0()(64bit) is needed by geomatica-2012-12.0-0.x86_64 librt.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 librt.so.1(GLIBC_2.2.5)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libSM.so.6()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libssl.so.0.9.8()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libstdc++.so.6()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libstdc++.so.6(CXXABI_1.3.1)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libstdc++.so.6(CXXABI_1.3)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libstdc++.so.6(GLIBCXX_3.4)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libstdc++.so.6(GLIBCXX_3.4.9)(64bit) is needed by geomatica-2012-12.0-0.x86_64 libtiff.so.3()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libutil.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libX11.so.6()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libXinerama.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libXm.so.4()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libXt.so.6()(64bit) is needed by geomatica-2012-12.0-0.x86_64 libXxf86vm.so.1()(64bit) is needed by geomatica-2012-12.0-0.x86_64

  Read the article

• Ubuntu doesn’t recognize Wacom Bamboo Eraser

  - by mudasobwa

  I have just connected Wacom Bamboo CTL-470K-RUPL to my Ubuntu 13.04 (up-to-date 10/26/2013). Everything works fine except an eraser. More precisely, nothing happens when I try to use it (even in GIMP with Preferences ? Input Devices ? Eraser configured). $ sudo dpkg reconfigure xserver-xorg-input-wacom doesn’t help either. How should I re-configure my Wacom tablet to enable eraser? Thanks in advance.

  Read the article

• What scientific plotting software is available?

  - by Helix

  I am currently doing some experimental work and I have a lot of data to trawl though. I use Gnumeric, and it's very good, but often I feel there has to be something better. Ideally I would like the maximum number of features with a minimal learning curve, but really I'd just like to know if there is something better than Gnumeric that I can use for manipulating and plotting data. What would you recommend?

  Read the article

• Can't install any update or software from Software Center

  - by geoh

  I tried to install updates and it's saying to get partial upgrade When trying Partial Upgrade doesn't working again. And when trying to install any software it doesn't installing. Can someone help me? EDIT the sudo apt-get update output is E: Could not get lock /var/lib/apt/lists/lock - open (11: Resource temporarily unavailable) E: Unable to lock directory /var/lib/apt/lists/ E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable) E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?

  Read the article

• some files just wont install- linux-image-3.5.0-42-generic

  - by jatin

  It gives the following details of the package operation failing after using the sofware updater on 12.10: installArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... (Reading database ... (Reading database ... 217566 files and directories currently installed.) Preparing to replace linux-image-3.5.0-36-generic 3.5.0-36.57~precise1 (using .../linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb) ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Done. Unpacking replacement linux-image-3.5.0-36-generic ... dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb (--unpack): unable to make backup link of `./boot/System.map-3.5.0-36-generic' before installing new version: Operation not permitted No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-36-generic /boot/vmlinuz-3.5.0-36-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-36-generic /boot/vmlinuz-3.5.0-36-generic Preparing to replace linux-image-3.5.0-42-generic 3.5.0-42.65~precise1 (using .../linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb) ... locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Done. Unpacking replacement linux-image-3.5.0-42-generic ... dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb (--unpack): unable to make backup link of `./boot/System.map-3.5.0-42-generic' before installing new version: Operation not permitted No apport report written because MaxReports is reached already Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic Preparing to replace memtest86+ 4.20-1.1ubuntu1 (using .../memtest86+_4.20-1.1ubuntu2.1_amd64.deb) ... Unpacking replacement memtest86+ ... dpkg: error processing /var/cache/apt/archives/memtest86+_4.20-1.1ubuntu2.1_amd64.deb (--unpack): unable to make backup link of `./boot/memtest86+.bin' before installing new version: Operation not permitted No apport report written because MaxReports is reached already locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.5.0-36-generic_3.5.0-36.57_amd64.deb /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65_amd64.deb /var/cache/apt/archives/memtest86+_4.20-1.1ubuntu2.1_amd64.deb Error in function: Output of df -h: Filesystem Size Used Avail Use% Mounted on /dev/sda6 38G 6.5G 30G 19% / udev 3.5G 4.0K 3.5G 1% /dev tmpfs 1.5G 924K 1.5G 1% /run none 5.0M 4.0K 5.0M 1% /run/lock none 3.6G 296K 3.6G 1% /run/shm none 100M 64K 100M 1% /run/user /dev/sda1 197M 87M 111M 44% /boot /dev/sda5 243G 971M 230G 1% /home

  Read the article

• MP3 files cut off in the Ubuntu One Android app

  - by rudefyet

  I noticed today on my phone (Droid X running Android 2.2.1) that when streaming the Ubuntu One app would skip to the next song before the previous one had finished. Looking into it, one of the mp3s downloaded from the server was only 2.5MB instead of 4.2MB as it shows on the server itself via one.ubuntu.com. It's happened with multiple tracks today (I remember it happening once the first time I used the app too but shrugged it off as a glitch). The app itself shows a star on the playlist item indicating the file was downloaded even though it was apparently cut off for some reason, perhaps lack of good cell coverage, or some sort of dropped connection. It seems like the latter may be happening and instead of showing an error or retrying it just stops and shows the download is complete.

  Read the article

• Scale plugin keeps forgetting hot corner settings on restart

  - by Michael Butler

  I'm using Ubuntu 12.04 with Unity, which I suppose uses Compiz as well. I have Compiz Settings Manager, and make the top left and bottom left corners of my screen activate the "Scale" (like Exposé) function to scale and show all windows. The problem is that when I restart the computer, the hot corners no longer do anything. I have to go back into compiz settings manager, delete the hot corner option, and then set it again. Something seems to be overriding or deleting the compiz hot corner setting on restart. Update: Sometimes, the setting loses its footing even while the computer is running. I haven't figured out yet what triggers it.

  Read the article

• How can I check if Python´s ConfigParser has a section or not?

  - by Voidcode

  How can I check if the ConfigParser mainfile has a section or not, And if it don´t then add a new section to it? I am trying with this code: import ConfigParser config = ConfigParser.ConfigParser() #if the config file don´t has the section 'globel', then add it to the config-file if not config.has_section("globel"): config.add_section("globel") config.set("globel", "settings", "someting") config.write(open("/tmp/myfile.conf", "w")) print "The new sestion globel is now added!!" #else just return the the value of globle->settings else: config.read("/tmp/myfile.conf") print "else... globle->settings == "+config.get("globel", "settings")

  Read the article

• Why is my machine unable to mount my SMB drives ("CIFS VFS: Error connecting to socket. Aborting operation", return code -115)?

  - by downbeat

  I have a machine running Precise (12.04 x64), and I cannot mount my SMB drives (I have 3, we'll call them public, private and download). It used to work (a week or two ago) and I didn't touch fstab! The machine hosting the shares is a commercial NAS, and I'm not seeing anything that would indicate it's an issue with the NAS. I have an older machine which I updated to Precise at the same time (both fresh installed, not dist-upgrade), so should have a very similar configuration. It is not having any problems. I am not having problems on windows machines/partitions either, only one of my Precise machines. The two machines are using identical entries in fstab and identical /etc/samba/smb.conf files. I don't think I've ever changed smb.conf (has never mattered before). My fstab entries all basically look like this: //10.1.1.111/public /media/public cifs credentials=/home/downbeat/.credentials,iocharset=utf8,uid=downbeat,gid=downbeat,file_mode=0644,dir_mode=0755 0 0 Here's the dmesg output on boot: [ 51.162198] CIFS VFS: Error connecting to socket. Aborting operation [ 51.162369] CIFS VFS: cifs_mount failed w/return code = -115 [ 51.194106] CIFS VFS: Error connecting to socket. Aborting operation [ 51.194250] CIFS VFS: cifs_mount failed w/return code = -115 [ 51.198120] CIFS VFS: Error connecting to socket. Aborting operation [ 51.198243] CIFS VFS: cifs_mount failed w/return code = -115 There are no other errors I see in the dmesg output. Originally when I ran 'testparm -s', the output contained these lines ERROR: lock directory /var/run/samba does not exist ERROR: pid directory /var/run/samba does not exist Here's the samba related programs I have installed: $ dpkg --list|grep -i samba ii libpam-winbind 2:3.6.3-2ubuntu2.3 Samba nameservice and authentication integration plugins ii libwbclient0 2:3.6.3-2ubuntu2.3 Samba winbind client library ii nautilus-share 0.7.3-1ubuntu2 Nautilus extension to share folder using Samba ii python-smbc 1.0.13-0ubuntu1 Python bindings for Samba clients (libsmbclient) ii samba-common 2:3.6.3-2ubuntu2.3 common files used by both the Samba server and client ii samba-common-bin 2:3.6.3-2ubuntu2.3 common files used by both the Samba server and client ii winbind 2:3.6.3-2ubuntu2.3 Samba nameservice integration server $ dpkg --list|grep -i smb ii dmidecode 2.11-4 SMBIOS/DMI table decoder ii libsmbclient 2:3.6.3-2ubuntu2.3 shared library for communication with SMB/CIFS servers ii python-smbc 1.0.13-0ubuntu1 Python bindings for Samba clients (libsmbclient) ii smbclient 2:3.6.3-2ubuntu2.3 command-line SMB/CIFS clients for Unix ii smbfs 2:5.1-1ubuntu1 Common Internet File System utilities - compatibility package $ dpkg --list|grep -i cifs ii cifs-utils 2:5.1-1ubuntu1 Common Internet File System utilities ii libsmbclient 2:3.6.3-2ubuntu2.3 shared library for communication with SMB/CIFS servers ii smbclient 2:3.6.3-2ubuntu2.3 command-line SMB/CIFS clients for Unix I originally noticed that my other machine had "libpam-winbind" and "nautilus-share" installed and the machine with the issue did not. Installing those two packages solved my errors with 'testparm -s', but did not fix my issue. Finally, I tried to purge and reinstall these packages smbclient smbfs cifs-utils samba-common samba-common-bin Still no luck. Again, it used to work; now it doesn't. Very similarly configured machine works (but some packages are out of date on the working machine). The NAS has only one interface/IP address, nmblookup works to find it's IP from it's hostname (from the machine with the issue) and it responds to a ping. Please any help would be great. I've been searching on AskUbuntu, SuperUser, ubuntuforums and plain old search engines for a week now and it's driving me crazy!

  Read the article

• Errors while updating Ubuntu 13.10

  - by santiago

  When I execute the updater it always throws the same error saying: Failed to download repository information. Check your internet connection. And when I run the sudo apt-get update I get these lines at the end: W: Failed to fetch cdrom://Ubuntu 13.10 Saucy Salamander - Release i386 (20131016.1)/dists/saucy/main/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs W: Failed to fetch cdrom://Ubuntu 13.10 Saucy Salamander - Release i386 (20131016.1)/dists/saucy/restricted/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs W: Failed to fetch http://ppa.launchpad.net/tiheum/equinox/ubuntu/dists/saucy/main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/tiheum/equinox/ubuntu/dists/saucy/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead

  Read the article

• how to reset gnome panel?

  - by Matt

  I think my gnome-panel is messed up because I alt+right click it and nothing pops up. I'm on 12.04, classic gnome desktop. so I used locate and found gnome-panel in .gconf somewhere, how do I clear just gnome-panel's settings so that I can add things to my panel again? edit: matt: ~/.gconf $ find|grep -iw panel ./desktop/ibus/panel ./desktop/ibus/panel/%gconf.xml ./apps/gnome-settings/gnome-panel ./apps/gnome-settings/gnome-panel/%gconf.xml

  Read the article

• How to get the mic on the Creative X-Mod soundcard working correctly?

  - by Nyamiou The Galeanthrope

  Well, I have this problem for a while now. When my computer start the mic seem to work but it's like it's muted. I have to go to a terminal and type alsamixer -c 1 and then I set up PCM Capture Source on Line and set up it back to Mic to get the mic actually working. Is there is a way to do this automatically or to solve the problem. I use a special workaround on this card because of the bug #429642. My workaround is having this at the end of my /usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf : [Mapping xmod-stereo-out] device-strings = surround51:%f description = Analog Stereo Creative Xmod channel-map = front-left,front-right paths-output = analog-output analog-output-headphones analog-output-mono analog-output-lfe-on-mono paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line priority = 10 Maybe the bug come from here, maybe I have to change something. Thank you for any help.

  Read the article

• Xampp : http://localhost/xampp/splash.php :english : nothing happens

  - by Oussama Abdallah

  After I start Xampp on my Ubuntu 12.04 I go to the localhost and I come to the site, where all languages are listed .... when I click any of these languages nothing happens. Follow steps are already done: I started Xampp with: sudo /opt/lamp/lamp start after doing so, I get in the console, that everything is running: Starting XAMPP for Linux ... XAMPP: Starting Apache...ok. XAMPP: Starting MySQL... ok. XAMPP: Starting ProFTPD...ok. Can you please help me solve this problem?

  Read the article

• How to build the Darling projrct on Ubuntu 13.10?

  - by mirror27

  The Darling project is an open source Darwin/OS X emulation layer for Linux. I downloaded the source code with git and tried to build it with cmake but it failed. The document says I need these packages: clang 3.1+ GCC 4.6+ (yes, you still need GCC for header files) libkqueue libbsd gnustep-base ("Foundation") gnustep-gui ("Cocoa") gnustep-corebase ("CoreFoundation") libobjc2 libudev openssl libasound libav libgc but I could not find them on apt or in software center. Also cmake showed this result: No build type selected, default to Debug This is a 64-bit build Building ObjC ABI 2 You have called ADD_LIBRARY for library Carbon without any source files. This typically indicates a problem with your CMakeLists.txt file You have called ADD_LIBRARY for library AppKit without any source files. This typically indicates a problem with your CMakeLists.txt file You have called ADD_LIBRARY for library auto without any source files. This typically indicates a problem with your CMakeLists.txt file CMake Error: The following variables are used in this project, but they are set to NOTFOUND. Please set them or make sure they are set and tested correctly in the CMake files: LIBGNUSTEPCOREBASE_INCLUDE_DIR used as include directory in directory /home/mirror/work/darling/darling/src/motool used as include directory in directory /home/mirror/work/darling/darling/src/util used as include directory in directory /home/mirror/work/darling/darling/src/libmach-o used as include directory in directory /home/mirror/work/darling/darling/src/libdyld used as include directory in directory /home/mirror/work/darling/darling/src/dyld used as include directory in directory /home/mirror/work/darling/darling/src/dyld used as include directory in directory /home/mirror/work/darling/darling/src/libSystem used as include directory in directory /home/mirror/work/darling/darling/src/libltdl used as include directory in directory /home/mirror/work/darling/darling/src/Cocoa used as include directory in directory /home/mirror/work/darling/darling/src/libobjcdarwin used as include directory in directory /home/mirror/work/darling/darling/src/CoreFoundation used as include directory in directory /home/mirror/work/darling/darling/src/libncurses used as include directory in directory /home/mirror/work/darling/darling/src/CoreSecurity used as include directory in directory /home/mirror/work/darling/darling/src/CoreServices used as include directory in directory /home/mirror/work/darling/darling/src/ExceptionHandling used as include directory in directory /home/mirror/work/darling/darling/src/IOKit used as include directory in directory /home/mirror/work/darling/darling/src/Foundation used as include directory in directory /home/mirror/work/darling/darling/src/Carbon used as include directory in directory /home/mirror/work/darling/darling/src/CoreVideo used as include directory in directory /home/mirror/work/darling/darling/src/OpenGL used as include directory in directory /home/mirror/work/darling/darling/src/thin used as include directory in directory /home/mirror/work/darling/darling/src/thin used as include directory in directory /home/mirror/work/darling/darling/src/libstdc++darwin LIBKQUEUE_INCLUDE_DIR used as include directory in directory /home/mirror/work/darling/darling/src/motool used as include directory in directory /home/mirror/work/darling/darling/src/util used as include directory in directory /home/mirror/work/darling/darling/src/libmach-o used as include directory in directory /home/mirror/work/darling/darling/src/libdyld used as include directory in directory /home/mirror/work/darling/darling/src/dyld used as include directory in directory /home/mirror/work/darling/darling/src/dyld used as include directory in directory /home/mirror/work/darling/darling/src/libSystem used as include directory in directory /home/mirror/work/darling/darling/src/libltdl used as include directory in directory /home/mirror/work/darling/darling/src/Cocoa used as include directory in directory /home/mirror/work/darling/darling/src/libobjcdarwin used as include directory in directory /home/mirror/work/darling/darling/src/CoreFoundation used as include directory in directory /home/mirror/work/darling/darling/src/libncurses used as include directory in directory /home/mirror/work/darling/darling/src/CoreSecurity used as include directory in directory /home/mirror/work/darling/darling/src/CoreServices used as include directory in directory /home/mirror/work/darling/darling/src/ExceptionHandling used as include directory in directory /home/mirror/work/darling/darling/src/IOKit used as include directory in directory /home/mirror/work/darling/darling/src/Foundation used as include directory in directory /home/mirror/work/darling/darling/src/Carbon used as include directory in directory /home/mirror/work/darling/darling/src/CoreVideo used as include directory in directory /home/mirror/work/darling/darling/src/OpenGL used as include directory in directory /home/mirror/work/darling/darling/src/thin used as include directory in directory /home/mirror/work/darling/darling/src/thin used as include directory in directory /home/mirror/work/darling/darling/src/libstdc++darwin LIBOBJC2_INCLUDE_DIR used as include directory in directory /home/mirror/work/darling/darling/src/motool used as include directory in directory /home/mirror/work/darling/darling/src/util used as include directory in directory /home/mirror/work/darling/darling/src/libmach-o used as include directory in directory /home/mirror/work/darling/darling/src/libdyld used as include directory in directory /home/mirror/work/darling/darling/src/dyld used as include directory in directory /home/mirror/work/darling/darling/src/dyld used as include directory in directory /home/mirror/work/darling/darling/src/libSystem used as include directory in directory /home/mirror/work/darling/darling/src/libltdl used as include directory in directory /home/mirror/work/darling/darling/src/Cocoa used as include directory in directory /home/mirror/work/darling/darling/src/libobjcdarwin used as include directory in directory /home/mirror/work/darling/darling/src/CoreFoundation used as include directory in directory /home/mirror/work/darling/darling/src/libncurses used as include directory in directory /home/mirror/work/darling/darling/src/CoreSecurity used as include directory in directory /home/mirror/work/darling/darling/src/CoreServices used as include directory in directory /home/mirror/work/darling/darling/src/ExceptionHandling used as include directory in directory /home/mirror/work/darling/darling/src/IOKit used as include directory in directory /home/mirror/work/darling/darling/src/Foundation used as include directory in directory /home/mirror/work/darling/darling/src/Carbon used as include directory in directory /home/mirror/work/darling/darling/src/CoreVideo used as include directory in directory /home/mirror/work/darling/darling/src/OpenGL used as include directory in directory /home/mirror/work/darling/darling/src/thin used as include directory in directory /home/mirror/work/darling/darling/src/thin used as include directory in directory /home/mirror/work/darling/darling/src/libstdc++darwin Configuring incomplete, errors occurred! How can I build the Darling project?

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >