Search Results

Search found 4161 results on 167 pages for 'desmond lost'.

Page 73/167 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• Automatize uploading the YouTube

  - by John

  Here's the problem: I would like to keep lots of home made videos. Of course, they are subject to being lost, or somebody could steal the the computer, or water or fire could destroy them. Secondly, I have to plug in my hard drive every time I want to watch something, which I find slow and cumbersome. I was thinking that perhaps I could upload the videos to Youtube with the privacy set to invite only and then delete the video from the hard drive automatically. Could this be done?

  Read the article

• How to know which revision or router I do have? [migrated]

  - by Rosamunda

  I´m trying to update my D-link Dir-600 router with the dd-wrt firmware. I´ve searched for it at the site and found that: Revision A1, B1 and B2 are supported, while C isn´t. Now my router has this information on the back: P/N IIR600GNA .... C1G H/W Ver: C1 F/W Ver: 3.01 So I guess the H/W Ver is the revision, and it´s C... so it´s a lost cause? Or maybe because it´s not just C but C1 I could do something with it? Thanks!

  Read the article

• Someone used my postfix smtp (port 25) to send spam mails to me

  - by Andreas

  This week, someone started to send spam-mails through my postfix-smtp access (I verified by logging in through telnet from an arbitrary pc and sending mails with any ids myself) on my server, with recipient and target being [email protected]. Since I have a catchall and mail-fowarding to my google account, I received all those (many) mails. After a lot of configuration (I lost track of what change did what, going through dozends of topics here and over the net) that hole seems fixed. Still, what hapened? Does port 25 need to be open and accepting for my catchall to work? What configuration did I do wrong? I remember the first thing I changed (that had an effect) was the inet_interface setting in main.cf, only later to find out that if this does not say "all", my mail to mydomain.com does not get forwarded any more.

  Read the article

• Sync content from my iPad to iTunes? i.e. "reverse" syncing

  - by Jim

  I recently had to reset my PC back to factory settings which lost my entire iTunes library. I still have my music and other files on my iPad and want to sync it back to the PC. Upon syncing it only gives me two options. "Erase and Sync" which replaces the contents of my iPad with the blank iTunes library, or, "Transfer Purchases" which reads like it will only transfer the purchases from iPad to iTunes. I would like to avoid re-burning my entire CD library to iTunes all over again. Is there a way for me to sync the iPad to the iTunes library (aka the computer)?

  Read the article

• Computer connects to lan, but not the internet

  - by Jay

  I have a computer with Vista Home that can connect to the router, but it cannot get on the internet. I cannot ping google.com, the request times out. I've tried this on two separate networks and have no trouble with other computers connecting. I've renewed ipconfig, reset winsock, updated the wireless adapter, and the hosts file looks fine. I've tried disabling the firewall as well as a direct wired connection. I did a scan with Norton and it didn't find anything. Is there anything else I can try before resorting to a system restore? Update (Copied from Answer) Windows Update was able to find updates and install them (though, they could have already been downloaded previously). When I pinged Google by using their IP 66.102.9.103, it said it lost 25 percent of the packets. I successfully flushed the DNS but it didn't help. Also, I found safe mode with networking works fine.

  Read the article

• Sharing files between centOS on virtualbox and windows 7 as the host

  - by Wasswa Samuel

  I have centOS 5.5 installed on virtual box it has no GUI so every thing is command based. I want to make a folder in centOS which i can share with my windows 7 host OS such that i can send files to and fro seamlessly. I am new to linux and i managed to install samba. I looked up some tips on net but i ended up getting confused and none of them worked. Can someone explain to me how i can do this in a straight forward way from how i can configure samba to how i can mount the folder such that it can be seen on the host operating system. I am completely lost.please help.

  Read the article

• Remote Desktop connection breaks the wireless connection

  - by Michal Talaga

  When I connect to my Windows 8 Professional machine via Remote Desktop (RDP) I almost always get my WiFi connection broken. The setup: T61P Lenovo Laptop + W8 at home Wireless Router with NAT forwards connections to that machine Windows 7 laptop at work connecting to the home laptop When I connect, very often I get to login and suddenly connection is lost and I cannot reconnect again. When I get home I find my WiFi connection is still connected to the Access Point but does not function. Can't even ping the router. What is strange is that disabling wireless with the hardware switch and enabling it again doesn't help. The only way to make it works again: - Reboot - Disable wifi with hardware switch AND disable the network card in Device Manager, then enable both I did not have this problem on the very same laptop when it was running Windows 7. Any hint how can I find where the problem is?

  Read the article

• DVD/CD-ROM drives stop working in Windows 7

  - by Marcus L

  All of a sudden Windows 7 (64 bit) lost all DVD and CD-ROM drives. It worked fine for about a month, then I don't know what happened. At first I thought it was a hardware problem - that my DVD-ROM had malfunctioned. But then I realized that Windows 7 no longer picked up on Demon Tools drives either. I can boot both Windows installation and Knoppix from the DVD-drive. So it seems to be a general problem with "disc-media". When trying to reinstall the hardware DVD-ROM Windows recognizes the drive (though sometimes simply label it as "CD-ROM drive"), but then says something went wrong - with from what I understand is a default error message (39), claiming the driver has become corrupt. I've tried every Microsoft recommended action, i.e. uninstall, reinstall, look for driver updates etc. etc., but with no luck. Any tip most welcome!

  Read the article

• Is there a Google Authenticator desktop client?

  - by cwd

  I am using Google Authenticator for 2-step authentication. I like how I can use a code and verify my account using my phone: I realize that the app was designed to run on a device other than a computer to increase security for the computer (in case that it is lost or stolen), but I would like to know if there is a way I can run Google Authenticator on my Macbook. Now, per the Google Authenticator Page it will not run on a desktop: What devices does Google Authenticator work on? Android version 2.1 or later BlackBerry OS 4.5 - 6.0 iPhone iOS 3.1.3 or later However there are several emulators for developers and so I wonder if it is possible to run one of these emulators and then run Google Authenticator with that. I do realize this is not a best practice - but I'm less worried about my laptop getting stolen and more worried about someone just hacking the account. So my question is this: Is it possible to run it on the desktop, even though it is not meant to be / not recommended?

  Read the article

• Disable writing RAID degraded mode

  - by jolivier

  I have a RAID5 with 5 disks on my machine and suspect the motherboard chipset to fail at some points and make my raid going in degraded mode. Last time it happened I noticed it on the failure of the 2nd drive connected to the same chipset and lost a lot of data. So I would like to prevent this, and especially I would like to have mdadm disable writes on the raid if one of the disk fails. So that in between I get notified, I recover and can use my system again. Sadly I could not find it in man mdadm so I was wondering if this is possible via a tool or hidden option since for me it looks like a standard feature of a RAID system. If this is not possible I would also be happy with a solution to stop the raid if degraded.

  Read the article

• Starting Apache through XAMPP is not working

  - by nogamo

  I've checked the error logs for this particular problem and it seems no access can be made to port 80. (OS 10013)An attempt was made to access a socket in a way forbidden by its access permissions. : make_sock: could not bind to address [::]:80 Turning the Windows firewall off didn't work, so I'm a bit lost. All of this is running on my laptop so I don't have my own "server" per se but I was under the impression that this would work without the need for one independent of my own personal computer. How would I solve this?

  Read the article

• How to set up VPN connection? Virtual Box 3.1.4 installed. Host - Snow Leopard(Mac) Guest - Windows 7 (32-bit)

  - by user31954

  I have Virtual Box 3.1.4 installed. Host - Snow Leopard(Mac) Guest - Windows 7 (32-bit). I have installed Windows on my MAC because I need it for work. I cannot establish VPN connection (using NAT). I tried to use bridged adapter, and I lost my internet connection on my guest(wind7) completely. I don't know much about networking, so I need detailed instructions for his particular OSs. Could someone please help me with this? Some random details about my attempts: On my host Windows I get error 800 trying to VPN. I can ping server address from my guest Win 7 and I have VPN connection established from my host Mac. I do disable VPN on my Mac when tying to establish it through guest. I tried to VPN from Mac and see if Guest sees it. It doesn't. Thank you!

  Read the article

• Is putting swapfile & temp folder in ramdisk a good idea in Windows 7 64 bit with lots of ram?

  - by Tony_Henrich

  I want my Windows to run as fast as possible. If I have 12GB ram in Windows 7 64bit, quad core cpu, and all apps fit in memory, will the swap file ever be used for anything? The question is about if its a good idea to put the swap file in a ram disk. Would a ram disk help in any way or will Windows intelligently use all the available memory for all its work? I am also thinking of putting the temp folder in a ram disk. I know ram disk is volatile memory and I don't care about its content in it if it gets lost.

  Read the article

• Failing Seagate HDD - Not Recognised

  - by thefragileomen

  I am having a look at a friend's computer which contains a 500GB Seagate HDD. Unfortunately the HDD is not recognised by the BIOS menu and it beeps 11 times upon powerup. I've moved the HDD to another laptop but the problem remains. I've downloaded SeaTools for DOS (Seagate's Diagnostic tool) but unfortunately to no avail and the disc remains unseen when using this DOS boot disc. The HDD is only 6 months old so I'm very surprised at this but it appears a common problem with Seagate 2.5" HDDs as well as other HDDs manufactured by Seagate. I intend to try it in an external caddy on Thursday when back in work and also through a forensic writeblocker but just wondering if anyone has any other suggestions? I am of the opinion it is some chip on the HDD board which prevents it spinning due to a fault. If so, I've lost to deactivate this just so I can simply recover the data on the drive and start with a new disc. Thanks

  Read the article

• http 301 redirection issue

  - by Guilhem Soulas

  I'm a little bit lost with a redirection. I want mysite.com, www.mysite.com and www.mysite.co.uk to redirect to mysite.co.uk. In Apache, I wrote this for mysite.co.uk in order to redirect www to the root domain: RewriteEngine on RewriteCond %{HTTP_HOST} ^www RewriteRule ^/(.*) http://mysite.co.uk/$1 [L,R=301] And for mysite.com, I wrote this redirect to mysite.co.uk: ServerName www.mysite.com RewriteEngine on RewriteRule ^/(.*) http://mysite.co.uk/$1 [L,R=301] This way, I can make the redirection work properly from www.mysite.com to mysite.co.uk, but it doesn't work for mysite.com too mysite.co.uk (without the www) at the same time. Could someone tell me how to make all my redirections work in all cases?

  Read the article

• recommendations for disk -> usb backup software

  - by TWood

  Recently I lost a tape drive and rather than repair the unit I decided that backups to usb external drives would be cheaper. In the past I used NTBackup and figured that the new server 2008 R2 backup wbadmin utility would be able to meet my needs. It does not. I am looking for recommendations for another utility that i can use. My requirements are: -backup local disk in addition to files on a network share -scheduled task integration (or some gui options to manage schedule) -non-incremental backup Basically I could do this all with WBAdmin if it just supported network shares. I saw some links that described attaching a vhd pointed to a network share but I am trying to avoid hacks like that. If i'm going to do all that trouble I'd just as well manually copy the directories over myself. If anyone has any software suggestions that might make this task easier for me let me know please. I am considering BackupAssist but can only find a few reviews here and there for it.

  Read the article

• Asus ux31e zenbook SSD non-standard / cant upgrade hdd?

  - by FstaRocka

  I bought a ux31e asus zenbook, and the drive crashed last week. I just cancelled an mSata ssd order because I fear asus has used a non standard ssd!!! what a bunch of crooks, ive lost all my respect for this company! Can anyone confirm what and why? My SSD model is xm11 128gb - it looks like a ram chip and only has two tongues with 12 and 6 pins respectively. The drive I was about to order mSata had 8 where mine had 6 - i never bothered counting the rest. This article seems to confirm! UX31 UX21 Zenbook Article "It looks like SSD uses a non-standard format"

  Read the article

• Understanding IUSR_<machine> account

  - by liho1eye

  Namely how is setting read/write permission for this account different from giving read/write access in the IIS (Windows 2003, so it should be IIS6 if I am not mistaken). Here is the issue: It looks like we had a security sweep and as a part of that IUSR account lost write access everywhere. A whole bunch of legacy ASP sites didn't like that at all... My very surfacish understanding is that it is enough to deny write access in the IIS console to protect a website from someone just dropping random files into it, and IUSR access only has effect on the application scripts running server side, and thus can be safely given write access back. edit: The applications in question obviously require write access to their own web folders, otherwise this wouldn't be an issue at all. Question is how to configure IIS/application to both satisfy security and make them work. My first instinct was to change account which is used to run the app pool. However that is already set to NETWORK_SERVICE, and that guy already has full access to folders in question.

  Read the article

• Auto restart server if virtual memory is too low

  - by Sukhjinder Singh

  There are quite number of software running on my server: httpd, varnish, mysql, memcache, java.. Each of them is using a part of the virtual memory and varnish was configured to be allocated 3GB of memory to run. Due to high traffic load which is 100K, our server ran out of memory and oom-killer is invoked. We've to reboot the server. We have 8GB of Virtual Memory and due to some reason we cannot extend to larger memory. My question is - Is there any automated script, which will monitor how much virtual memory left and based upon certain criteria, lets say if 500MB left than restart the server automatically? I do know this is not the proper solution but we have to do it, otherwise we don't know when server will get OOM and by the time we know and restart the server, we lost our visiting users.

  Read the article

• Setting Boot and Mirror Disks correctly at the Solaris OBP

  - by Shaun Dewberry

  I am recovering a domain that was lost due to power outage on an Sun Fire E25K server. I know how to set the appropriate parameters at the openboot prompt using nvalias/devalias, boot etc. However, I do not understand how one gets from the output of show-disks {1a0} ok show-disks a) /pci@1dd,600000/SUNW,qlc@1/fp@0,0/disk b) /pci@1dd,700000/SUNW,qlc@1/fp@0,0/disk c) /pci@1dc,700000/pci@1/pci@1/scsi@2,1/disk d) /pci@1dc,700000/pci@1/pci@1/scsi@2/disk e) /pci@1bd,600000/SUNW,qlc@1/fp@0,0/disk f) /pci@1bd,700000/SUNW,qlc@1/fp@0,0/disk g) /pci@1bc,700000/pci@1/pci@1/scsi@2,1/disk h) /pci@1bc,700000/pci@1/pci@1/scsi@2/disk q) NO SELECTION Enter Selection, q to quit: to the correct full disk path. I know it is basically one of the pci/scsi paths listed above, but in all instruction or examples a string of additional characters is appended to the path to specify Targets and Units but the explanation of the path construction is never given. Could someone please explain how to construct this disk path correctly?

  Read the article

• Can I extend my total RAM by buying more, and what kind do I need to buy

  - by Xeon06

  I currently have 4 GB total RAM and I would like to get some more, to bring it to a total of 8 GB. Is it possible to simply buy another 4 GB and bring it to 8? If so, what kind should I be buying? There is a lot of different possibilities, DDR3, DDR2, clock speed, etc. I am kind of lost among all this. My current setup goes like this: ACER EG43M mainboard Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz 4 total RAM slots, 2 occupied by 2 GB sticks According to CPU-Z, my memory type is DDR3 (not sure how reliable that is) Full CPU-Z dump Windows 7 64-bit So basically, I want to know whether it's possible to extend my current RAM to get 8 GB total by buying another 4, and if so, what kind of RAM do I need? Note that I am not looking for shopping recommendations. I'm worried about the hardware compatibility.

  Read the article

• Which particular file caused "Delayed write failed" error?

  - by user35020

  I sometimes get this error when resuming from hibernation: Delayed Write Failed: Windows was unable to save all the data for the file G:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. I know this is caused because the hard drive (G:, an external USB drive) was (a) plugged in when I hibernated and wasn't ready at wake-up, or (b) I simply forgot to plug it when resuming from hibernation. My question is: is there any way to see which particular file/folder/etc failed to be written? The hard drive functions correctly before and after, so there seems to be no permanent damage. Is there a detailed log someplace or a utility? I've searched but found nothing. Thanks for any help!

  Read the article

• How to set up VPN connection? Virtual Box 3.1.4 installed. Host - Snow Leopard(Mac) Guest - Windows

  - by user31954

  I have Virtual Box 3.1.4 installed. Host - Snow Leopard(Mac) Guest - Windows 7 (32-bit). I have installed Windows on my MAC because I need it for work. I cannot establish VPN connection (using NAT). I tried to use bridged adapter, and I lost my internet connection on my guest(wind7) completely. I don't know much about networking, so I need detailed instructions for his particular OSs. Could someone please help me with this? Some random details about my attempts: On my host Windows I get error 800 trying to VPN. I can ping server address from my guest Win 7 and I have VPN connection established from my host Mac. I do disable VPN on my Mac when tying to establish it through guest. I tried to VPN from Mac and see if Guest sees it. It doesn't. Thank you!

  Read the article

• VMWare Player 5.0 Upgrade - Bridged Networking No Longer Works

  - by Syndog

  I've been using VMWare Player 4 on my Windows 7 PC, running my VMs under a bridged networking configuration without any problem. I settled on bridged networking two reasons... I often use VMs to host web applications for test purposes. I never could get NAT to work for me anyway, but no love lost, considering reason #1. Now that I've upgraded to VMWare Player 5, the situation has completely reversed. In other words, bridged networking no longer works at all, and NAT does. Has anyone else come across this? Any ideas on getting bridged networking to work again? This happens with both Windows and Linux guest OSes. VMWare Tools has been fully updated. I've tried the usual vmnetcfg.exe utility fix, to no avail.

  Read the article

• Linux command line based spam checker?

  - by anonymous-one

  Does a command line based spam checker exist? We have created a mailbox at a 3rd party, and unfortunately decided on spam checking 'disabled' in the initial setup. There is no way to re-enable spam checking, the mailbox must be delete (and thus all contents lost) and re-created. Does anything exist where we can pump in either: A) Subject + from + to + body + all other fields. OR B) Raw message dump (headers + body). And the command line will let us know weather the email is possibly spam? Thanks.

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >