Search Results

Search found 9163 results on 367 pages for 'feature packs'.

Page 73/367 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• .NET 3.5 Installation Problems in Windows 8

  - by Rick Strahl

  Windows 8 installs with .NET 4.5. A default installation of Windows 8 doesn't seem to include .NET 3.0 or 3.5, although .NET 2.0 does seem to be available by default (presumably because Windows has app dependencies on that). I ran into some pretty nasty compatibility issues regarding .NET 3.5 which I'll describe in this post. I'll preface this by saying that depending on how you install Windows 8 you may not run into these issues. In fact, it's probably a special case, but one that might be common with developer folks reading my blog. Specifically it's the install order that screwed things up for me -  installing Visual Studio before explicitly installing .NET 3.5 from Windows Features - in particular. If you install Visual Studio 2010 I highly recommend you install .NET 3.5 from Windows features BEFORE you install Visual Studio 2010 and save yourself the trouble I went through. So when I installed Windows 8, and then looked at the Windows Features to install after the fact in the Windows Feature dialog, I thought - .NET 3.5 - who needs it. I'd be happy to not have to install .NET 3.5, but unfortunately I found out quite a while after initial installation that one of my applications/tools (DevExpress's awesome CodeRush) depends on it and won't install without it. Enabling .NET 3.5 in Windows 8 If you want to run .NET 3.5 on Windows 8, don't download an installer - those installers don't work on Windows 8, and you don't need to do this because you can use the Windows Features dialog to enable .NET 3.5: And that *should* do the trick. If you do this before you install other apps that require .NET 3.5 and install a non-SP1 one version of it, you are going to have no problems. Unfortunately for me, even after I've installed the above, when I run the CodeRush installer I still get this lovely dialog: Now I double checked to see if .NET 3.5 is installed - it is, both for 32 bit and 64 bit. I went as far as creating a small .NET Console app and running it to verify that it actually runs. And it does… So naturally I thought the CodeRush installer is a little whacky. After some back and forth Alex Skorkin on Twitter pointed me in the right direction: He asked me to look in the registry for exact info on which version of .NET 3.5 is installed here: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP where I found that .NET 3.5 SP1 was installed. This is the 64 bit key which looks all correct. However, when I looked under the 32 bit node I found: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\NET Framework Setup\NDP\v3.5 Notice that the service pack number is set to 0, rather than 1 (which it was for the 64 bit install), which is what the installer requires. So to summarize: the 64 bit version is installed with SP1, the 32 bit version is not. Uhm, Ok… thanks for that! Easy to fix, you say - just install SP1. Nope, not so easy because the standalone installer doesn't work on Windows 8. I can't get either .NET 3.5 installer or the SP 1 installer to even launch. They simply start and hang (or exit immediately) without messages. I also tried to get Windows to update .NET 3.5 by checking for Windows Updates, which should pick up on the dated version of .NET 3.5 and pull down SP1, but that's also no go. Check for Updates doesn't bring down any updates for me yet. I'm sure at some random point in the future Windows will deem it necessary to update .NET 3.5 to SP1, but at this point it's not letting me coerce it to do it explicitly. How did this happen I'm not sure exactly whether this is the cause and effect, but I suspect the story goes like this: Installed Windows 8 without support for .NET 3.5 Installed Visual Studio 2010 which installs .NET 3.5 (no SP) I now had .NET 3.5 installed but without SP1. I then: Tried to install CodeRush - Error: .NET 3.5 SP1 required Enabled .NET 3.5 in Windows Features I figured enabling the .NET 3.5 Windows Features would do the trick. But still no go. Now I suspect Visual Studio installed the 32 bit version of .NET 3.5 on my machine and Windows Features detected the previous install and didn't reinstall it. This left the 32 bit install at least with no SP1 installed. How to Fix it My final solution was to completely uninstall .NET 3.5 *and* to reboot: Go to Windows Features Uncheck the .NET Framework 3.5 Restart Windows Go to Windows Features Check .NET Framework 3.5 and voila, I now have a proper installation of .NET 3.5. I tried this before but without the reboot step in between which did not work. Make sure you reboot between uninstalling and reinstalling .NET 3.5! More Problems The above fixed me right up, but in looking for a solution it seems that a lot of people are also having problems with .NET 3.5 installing properly from the Windows Features dialog. The problem there is that the feature wasn't properly loading from the installer disks or not downloading the proper components for updates. It turns out you can explicitly install Windows features using the DISM tool in Windows.dism.exe /online /enable-feature /featurename:NetFX3 /Source:f:\sources\sxs You can try this without the /Source flag first - which uses the hidden Windows installer files if you kept those. Otherwise insert the DVD or ISO and point at the path \sources\sxs path where the installer lives. This also gives you a little more information if something does go wrong.© Rick Strahl, West Wind Technologies, 2005-2012Posted in Windows  .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Sort Your Emails by Conversation in Outlook 2010

  - by Matthew Guay

  Do you prefer the way Gmail sorts your emails by conversation?  Here’s how you can use this handy feature in Outlook 2010 too. One exciting new feature in Outlook 2010 is the ability to sort and link your emails by conversation.  This makes it easier to know what has been discussed in emails, and helps you keep your inbox more tidy.  Some users don’t like their emails linked into conversations, and in the final release of Outlook 2010 it is turned off by default.  Since this is a new feature, new users may overlook it and never know it’s available.  Here’s how you can enable conversation view and keep your email conversations accessible and streamlined. Activate Conversation View By default, your inbox in Outlook 2010 will look much like it always has in Outlook…a list of individual emails. To view your emails by conversation, select the View tab and check the Show as Conversations box on the top left. Alternately, click on the Arrange By tab above your emails, and select Show as Conversations. Outlook will ask if you want to activate conversation view in only this folder or all folders.  Choose All folders to view all emails in Outlook in conversations. Outlook will now resort your inbox, linking emails in the same conversation together.  Individual emails that don’t belong to a conversation will look the same as before, while conversations will have a white triangle carrot on the top left of the message title.  Select the message to read the latest email in the conversation. Or, click the triangle to see all of the messages in the conversation.  Now you can select and read any one of them. Most email programs and services include the previous email in the body of an email when you reply.  Outlook 2010 can recognize these previous messages as well.  You can navigate between older and newer messages from popup Next and Previous buttons that appear when you hover over the older email’s header.  This works both in the standard Outlook preview pane and when you open an email in its own window.   Edit Conversation View Settings Back in the Outlook View tab, you can tweak your conversation view to work the way you want.  You can choose to have Outlook Always Expand Conversations, Show Senders Above the Subject, and to Use Classic Indented View.  By default, Outlook will show messages from other folders in the conversation, which is generally helpful; however, if you don’t like this, you can uncheck it here.  All of these settings will stay the same across all of your Outlook accounts. If you choose Indented View, it will show the title on the top and then an indented message entry underneath showing the name of the sender. The Show Senders Above the Subject view makes it more obvious who the email is from and who else is active in the conversation.  This is especially useful if you usually only email certain people about certain topics, making the subject lines less relevant. Or, if you decide you don’t care for conversation view, you can turn it off by unchecking the box in the View tab as above. Conclusion Although it may take new users some time to get used to, conversation view can be very helpful in keeping your inbox organized and letting important emails stay together.  If you’re a Gmail user syncing your email account with Outlook, you may find this useful as it makes Outlook 2010 work more like Gmail, even when offline. If you’d like to sync your Gmail account with Outlook 2010, check out our articles on syncing it with POP3 and IMAP. Similar Articles Productive Geek Tips Automatically Move Daily Emails to Specific Folders in OutlookQuickly Clean Your Inbox in Outlook 2003/2007Find Emails With Attachments with Outlook 2007’s Instant SearchAdd Your Gmail Account to Outlook 2010 using POPSchedule Auto Send & Receive in Microsoft Outlook TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox)

  Read the article

• Team Leaders & Authors - Manage and Report Workflow using "Print an Outline" in UPK

  - by [email protected]

  Did you know you can "print an outline?" You can print any outline or portion of an outline. Why might you want to "print an outline" in UPK... Have you ever wondered how many topics you have recorded, how many of your topics are ready for review, or even better, how many topics are complete! Do you need to report your project status to management? Maybe you just like to have a copy of your outline to refer to during development. Included in this output is the outline structure as well as the layout defined in the Details View of the Outline Editor. To print an outline, you must open either a module or section in the Outline Editor. A set of default data columns is automatically included in the output; however, you can configure which columns you want to appear in the report by switching to the Details view and customizing the columns. (To learn more about customizing your columns refer to the Add and Remove Columns section of the Content Development.pdf guide) To print an outline from the Outline Editor: 1. Open a module or section document in the Outline Editor. 2. Expand the documents to display the details that you want included in the report. 3. On the File menu, choose Print and use the toolbar icons to print, view, or save the report to a file. Personally, I opt to save my outline in Microsoft Excel. Using the delivered features of Microsoft Excel you can add columns of information, such as development notes, to your outline or you can graph and chart your Project status. As mentioned above you can configure what columns you want to appear in the outline. When utilizing the Print an Outline feature in conjunction with the Managing Workflow features of the UPK Multi-user instance you as a Team Lead or Author can better report project status. Read more about Managing Workflow below. Managing Workflow: The Properties toolpane contains special properties that allow authors to track document status or State as well as assign Document Ownership. Assign Content State The State property is an editable property for communicating the status of a document. This is particularly helpful when collaborating with other authors in a development team. Authors can assign a state to documents from the master list defined by the administrator. The default list of States includes (blank), Not Started, Draft, In Review, and Final. Administrators can customize the list by adding, deleting or renaming the values. To assign a State value to a document: 1. Make sure you are working online. 2. Display the Properties toolpane. 3. Select the document(s) to which you want to assign a state. Note: You can select multiple documents using the standard Windows selection keys (CTRL+click and SHIFT+click). 4. In the Workflow category, click in the State cell. 5. Select a value from the list. Assign Document Ownership In many enterprises, multiple authors often work together developing content in a team environment. Team leaders typically handle large projects by assigning specific development responsibilities to authors. The Owner property allows team leaders and authors to assign documents to themselves and other authors to track who is responsible for a specific document. You view and change document assignments for a document using the Owner property in the Properties toolpane. To assign a document owner: 1. Make sure you are working online. 2. On the View menu, choose Properties. 3. Select the document(s) to which you want to assign document responsibility. Note: You can select multiple documents using the standard Windows selection keys (CTRL+click and SHIFT+click). 4. In the Workflow category, click in the Owner cell. 5. Select a name from the list. Is anyone out there already using this feature? Share your ideas with the group. Those of you new to this feature, give it a test drive and let us know what you think. - Kathryn Lustenberger, Oracle UPK & Tutor Outbound Product Management

  Read the article

• The Krewe App Post-Mortem

  - by Chris Gardner

  Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2014/05/23/the-krewe-app-post-mortem.aspxNow that teched has come and gone, I thought I would use this opportunity to do a little post-mortem on The Krewe app. It is one thing to test the app at home. It is a completely different animal to see how it responds in the environment TechEd creates. At a future time, I will list all the things that I would like to change with the app. At this point, I will find some good way to get community feedback. I want to break all this down screen by screen. We'll start with the screen I got right. The first of these is the events calendar. This is the one screen that, to you guys, just worked. However, there was an issue here. When I wrote v1 for last year, I was lazy and placed everything in CST. This caused problems with the achievements, which I will explain later. Furthermore, the event locations were not check-in locations. This created another problem with the achievements. Next, we get to the Twitter page. For what this page does, it works great. For those that don't know, I have an Azure Worker Role that polls Twitter pretty close to the rate limit. I cache these results in my database, and serve them upon request. This gives me great control over the content. I just have to remember to flush past tweets after a period, to save database growth. The next screen is the check-in screen. This screen has been the bane of my existence since I first created the thing. Last year, I used a background task to check people out of locations after they traveled. This year, I removed the background task in favor of a foursquare model. You are checked out after 3 hours or when you check-in to some other location. This seemed to work well, until those pesky achievements came into the mix. Again, more on this later. Next, I want to address the Connect and Connections screens together. I wanted to use some of the capabilities of the phone, and NFC seemed a natural choice. From this, I came up with the gamification aspects of the app. Since we are, fundamentally, a networking organization, I wanted to encourage people to actually network. Users could make and share a profile, similar to a virtual business card. I just had to figure out how to get people to use the feature. Why not just give someone a business card? Thus, the achievements were born. This was such a good idea. It would have been a great idea, if I have come up with it about two months earlier... When I came up with these ideas, I had about 2 weeks to implement them. Version 1 of the app was, basically, a pure consumption app. We provided data and centralized it. With version 2, the app became a much more interactive experience. The API was not ready for this change in such a short period of time. Most of this became apparent when I started implementing the achievements. The achievements based on count and specific person when fairly easy. The problem came with tying them to locations and events. This took some true SQL kung fu. This also showed me the rookie mistake of putting CST, not UTC, in the database. Once I got all of that cleaned up, I had to find a way to get the achievement system to talk to the phone. I knew I needed to be able to dynamically add achievements. I wouldn't know the precise location of some things until I got to Houston. I wanted the server to approve the achievements. This, unfortunately, required a decent data connection. Some achievements required GPS levels of location accuracy in areas of network triangulation. All of this became a huge nightmare. My flagship feature was based on some silly assumptions. Still, I managed to get 31 people to get the first achievement (Make 1 Connection.) Quite a few of those managed to get to the higher levels. Soon, I will post a list of the feature and changes that need to happen to the API. This includes things like proper objects for communication, geo-fencing, and caching. However, that is for another day.

  Read the article

• MVVM Light V4 preview 2 (BL0015) #mvvmlight

  - by Laurent Bugnion

  Over the past few weeks, I have worked hard on a few new features for MVVM Light V4. Here is a second early preview (consider this pre-alpha if you wish). The features are unit-tested, but I am now looking for feedback and there might be bugs! Bug correction: Messenger.CleanupList is now thread safe This was an annoying bug that is now corrected: In some circumstances, an exception could be thrown when the Messenger’s recipients list was cleaned up (i.e. the “dead” instances were removed). The method is called now and then and the exception was thrown apparently at random. In fact it was really a multi-threading issue, which is now corrected. Bug correction: AllowPartiallyTrustedCallers prevents EventToCommand to work This is a particularly annoying regression bug that was introduced in BL0014. In order to allow MVVM Light to work in XBAPs too, I added the AllowPartiallyTrustedCallers attribute to the assemblies. However, we just found out that this causes issues when using EventToCommand. In order to allow EventToCommand to continue working, I reverted to the previous state by removing the AllowPartiallyTrustedCallers attribute for now. I will work with my friends at Microsoft to try and find a solution. Stay tuned. Bug correction: XML documentation file is now generated in Release configuration The XML documentation file was not generated for the Release configuration. This was a simple flag in the project file that I had forgotten to set. This is corrected now. Applying EventToCommand to non-FrameworkElements This feature has been requested in order to be able to execute a command when a Storyboard is completed. I implemented this, but unfortunately found out that EventToCommand can only be added to Storyboards in Silverlight 3 and Silverlight 4, but not in WPF or in Windows Phone 7. This obviously limits the usefulness of this change, but I decided to publish it anyway, because it is pretty damn useful in Silverlight… Why not in WPF? In WPF, Storyboards added to a resource dictionary are frozen. This is a feature of WPF which allows to optimize certain objects for performance: By freezing them, it is a contract where we say “this object will not be modified anymore, so do your perf optimization on them without worrying too much”. Unfortunately, adding a Trigger (such as EventTrigger) to an object in resources does not work if this object is frozen… and unfortunately, there is no way to tell WPF not to freeze the Storyboard in the resources… so there is no way around that (at least none I can see. In Silverlight, objects are not frozen, so an EventTrigger can be added without problems. Why not in WP7? In Windows Phone 7, there is a totally different issue: Adding a Trigger can only be done to a FrameworkElement, which Storyboard is not. Here I think that we might see a change in a future version of the framework, so maybe this small trick will work in the future. Workaround? Since you cannot use the EventToCommand on a Storyboard in WPF and in WP7, the workaround is pretty obvious: Handle the Completed event in the code behind, and call the Command from there on the ViewModel. This object can be obtained by casting the DataContext to the ViewModel type. This means that the View needs to know about the ViewModel, but I never had issues with that anyway. New class: NotifyPropertyChanged Sometimes when you implement a model object (for example Customer), you would like to have it implement INotifyPropertyChanged, but without having all the frills of a ViewModelBase. A new class named NotifyPropertyChanged allows you to do that. This class is a simple implementation of INotifyPropertyChaned (with all the overloads of RaisePropertyChanged that were implemented in BL0014). In fact, ViewModelBase inherits NotifyPropertyChanged. ViewModelBase does not implement IDisposable anymore The IDisposable interface and the Dispose method had been marked obsolete in the ViewModelBase class already in V3. Now they have been removed. Note: By this, I do not mean that IDisposable is a bad interface, or that it shouldn’t be used on viewmodels. In the contrary, I know that this interface is very useful in certain circumstances. However, I think that having it by default on every instance of ViewModelBase was sending a wrong message. This interface has a strong meaning in .NET: After Dispose has been executed, the instance should not be used anymore, and should be ready for garbage collection. What I really wanted to have on ViewModelBase was rather a simple cleanup method, something that can be executed now and then during runtime. This is fulfilled by the ICleanup interface and its Cleanup method. If your ViewModels need IDisposable, you can still use it! You will just have to implement the interface on the class itself, because it is not available on ViewModelBase anymore. What’s next? I have a couple exciting new features implemented already but that need more testing before they go live… Just stay tuned and by MIX11 (12-14 April 2011), we should see at least a major addition to MVVM Light Toolkit, as well as another smaller feature which is pretty cool nonetheless More about this later! Happy Coding Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• SPARC M7 Chip - 32 cores - Mind Blowing performance

  - by Angelo-Oracle

  The M7 Chip Oracle just announced its Next Generation Processor at the HotChips HC26 conference. As the Tech Lead in our Systems Division's Partner group, I had a front row seat to the extraordinary price performance advantage of Oracle current T5 and M6 based systems. Partner after partner tested  these systems and were impressed with it performance. Just read some of the quotes to see what our partner has been saying about our hardware. We just announced our next generation processor, the M7. This has 32 cores (up from 16-cores in T5 and 12-cores in M6). With 20 nm technology  this is our most advanced processor. The processor has more cores than anything else in the industry today. After the Sun acquisition Oracle has released 5 processors in 4 years and this is the 6th.  The S4 core  The M7 is built using the foundation of the S4 core. This is the next generation core technology. Like its predecessor, the S4 has 8 dynamic threads. It increases the frequency while maintaining the Pipeline depth. Each core has its own fine grain power estimator that keeps the core within its power envelop in 250 nano-sec granularity. Each core also includes Software in Silicon features for Application Acceleration Support. Each core includes features to improve Application Data Integrity, with almost no performance loss. The core also allows using part of the Virtual Address to store meta-data.  User-Level Synchronization Instructions are also part of the S4 core. Each core has 16 KB Instruction and 16 KB Data L1 cache. The Core Clusters  The cores on the M7 chip are organized in sets of 4-core clusters. The core clusters share  L2 cache.  All four cores in the complex share 256 KB of 4 way set associative L2 Instruction Cache, with over 1/2 TB/s of throughput. Two cores share 256 KB of 8 way set associative L2 Data Cache, with over 1/2 TB/s of throughput. With this innovative Core Cluster architecture, the M7 doubles core execution bandwidth. to maximize per-thread performance.  The Chip  Each  M7 chip has 8 sets of these core-clusters. The chip has 64 MB on-chip L3 cache. This L3 caches is shared among all the cores and is partitioned into 8 x 8 MB chunks. Each chunk is  8-way set associative cache. The aggregate bandwidth for the L3 cache on the chip is over 1.6TB/s. Each chip has 4 DDR4 memory controllers and can support upto 16 DDR4 DIMMs, allowing for 2 TB of RAM/chip. The chip also includes 4 internal links of PCIe Gen3 I/O controllers.  Each chip has 7 coherence links, allowing for 8 of these chips to be connected together gluelessly. Also 32 of these chips can be connected in an SMP configuration. A potential system with 32 chips will have 1024 cores and 8192 threads and 64 TB of RAM.  Software in Silicon The M7 chip has many built in Application Accelerators in Silicon. These features will be exposed to our Software partners using the SPARC Accelerator Program.  The M7  has built-in logic to decompress data at the speed of memory access. This means that applications can directly work on compressed data in memory increasing the data access rates. The VA Masking feature allows the use of part of the virtual address to store meta-data.  Realtime Application Data Integrity The Realtime Application Data Integrity feature helps applications safeguard against invalid, stale memory reference and buffer overflows. The first 4-bits if the Pointer can be used to store a version number and this version number is also maintained in the memory & cache lines. When a pointer accesses memory the hardware checks to make sure the two versions match. A SEGV signal is raised when there is a mismatch. This feature can be used by the Database, applications and the OS.  M7 Database In-Memory Query Accelerator The M7 chip also includes a In-Silicon Query Engines.  These accelerate tasks that work on In-Memory Columnar Vectors. Oracle In-Memory options stores data in Column Format. The M7 Query Engine can speed up In-Memory Format Conversion, Value and Range Comparisons and Set Membership lookups. This engine can work on Compressed data - this means not only are we accelerating the query performance but also increasing the memory bandwidth for queries.  SPARC Accelerated Program  At the Hotchips conference we also introduced the SPARC Accelerated Program to provide our partners and third part developers access to all the goodness of the M7's SPARC Application Acceleration features. Please get in touch with us if you are interested in knowing more about this program. 

  Read the article

• Forcing an External Activation with Service Broker

  - by Davide Mauri

  In these last days I’ve been working quite a lot with Service Broker, a technology I’m really happy to work with, since it can give a lot of satisfaction. The scale-out solution one can easily build is simply astonishing. I’m helping a company to build a very scalable and – yet almost inexpensive – invoicing system that has to be able to scale out using commodity hardware. To offload the work from the main server to satellite “compute nodes” (yes, I’ve borrowed this term from PDW) we’re using Service Broker and the External Activator application available in the SQL Server Feature Pack. For those who are not used to work with SSB, the External Activation is a feature that allows you to intercept the arrival of a message in a queue right from your application code. http://msdn.microsoft.com/en-us/library/ms171617.aspx (Look for “Event-Based Activation”) In order to make life even more easier, Microsoft released the External Activation application that saves you even from writing even this code. http://blogs.msdn.com/b/sql_service_broker/archive/tags/external+activator/ The External Activator application can be configured to execute your own application so that each time a message – an invoice in my case – arrives in the target queue, the invoking application is executed and the invoice is calculated. The very nice feature of External Activator is that it can automatically execute as many configured application in order to process as many messages as your system can handle.  This also a lot of create a scale-out solution, leaving to the developer only a fraction of the problems that usually came with asynchronous programming. Developers are also shielded from Service Broker since everything can be encapsulated in Stored Procedures, so that – for them – developing such scale-out asynchronous solution is not much more complex than just executing a bunch of Stored Procedures. Now, if everything works correctly, you don’t have to bother of anything else. You put messages in the queue and your application, invoked by the External Activator, process them. But what happen if for some reason your application fails to process the messages. For examples, it crashes? The message is safe in the queue so you just need to process it again. But your application is invoked by the External Activator application, so now the question is, how do you wake up that app? Service Broker will engage the activation process only if certain conditions are met: http://msdn.microsoft.com/en-us/library/ms171601.aspx But how we can invoke the activation process manually, without having to wait for another message to arrive (the arrival of a new message is a condition that can fire the activation process)? The “trick” is to do manually with the activation process does: sending a system message to a queue in charge of handling External Activation messages: declare @conversationHandle uniqueidentifier; declare @n xml = N' <EVENT_INSTANCE>   <EventType>QUEUE_ACTIVATION</EventType>   <PostTime>' + CONVERT(CHAR(24),GETDATE(),126) + '</PostTime>   <SPID>' + CAST(@@SPID AS VARCHAR(9)) + '</SPID>   <ServerName>[your_server_name]</ServerName>   <LoginName>[your_login_name]</LoginName>   <UserName>[your_user_name]</UserName>   <DatabaseName>[your_database_name]</DatabaseName>   <SchemaName>[your_queue_schema_name]</SchemaName>   <ObjectName>[your_queue_name]</ObjectName>   <ObjectType>QUEUE</ObjectType> </EVENT_INSTANCE>' begin dialog conversation     @conversationHandle from service        [<your_initiator_service_name>] to service          '<your_event_notification_service>' on contract         [http://schemas.microsoft.com/SQL/Notifications/PostEventNotification] with     encryption = off,     lifetime = 6000 ; send on conversation     @conversationHandle message type     [http://schemas.microsoft.com/SQL/Notifications/EventNotification] (@n) ;     end conversation @conversationHandle; That’s it! Put the code in a Stored Procedure and you can add to your application a button that says “Force Queue Processing” (or something similar) in order to start the activation process whenever you need it (which should not occur too frequently but it may happen). PS I know that the “fire-and-forget” (ending the conversation without waiting for an answer) technique is not a best practice, but in this case I don’t see how it can hurts so I decided to stay very close to the KISS principle []

  Read the article

• Goodbye XML&hellip; Hello YAML (part 2)

  - by Brian Genisio's House Of Bilz

  Part 1 After I explained my motivation for using YAML instead of XML for my data, I got a lot of people asking me what type of tooling is available in the .Net space for consuming YAML.  In this post, I will discuss a nice tooling option as well as describe some small modifications to leverage the extremely powerful dynamic capabilities of C# 4.0.  I will be referring to the following YAML file throughout this post Recipe: Title: Macaroni and Cheese Description: My favorite comfort food. Author: Brian Genisio TimeToPrepare: 30 Minutes Ingredients: - Name: Cheese Quantity: 3 Units: cups - Name: Macaroni Quantity: 16 Units: oz Steps: - Number: 1 Description: Cook the macaroni - Number: 2 Description: Melt the cheese - Number: 3 Description: Mix the cooked macaroni with the melted cheese Tooling It turns out that there are several implementations of YAML tools out there.  The neatest one, in my opinion, is YAML for .NET, Visual Studio and Powershell.  It includes a great editor plug-in for Visual Studio as well as YamlCore, which is a parsing engine for .Net.  It is in active development still, but it is certainly enough to get you going with YAML in .Net.  Start by referenceing YamlCore.dll, load your document, and you are on your way.  Here is an example of using the parser to get the title of the Recipe: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var title = recipe["Title"] as string; In a similar way, you can access data in the Ingredients set: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var ingredients = recipe["Ingredients"] as ArrayList; foreach (Hashtable ingredient in ingredients) { var name = ingredient["Name"] as string; } You may have noticed that YamlCore uses non-generic Hashtables and ArrayLists.  This is because YamlCore was designed to work in all .Net versions, including 1.0.  Everything in the parsed tree is one of two things: Hashtable, ArrayList or Value type (usually String).  This translates well to the YAML structure where everything is either a Map, a Set or a Value.  Taking it further Personally, I really dislike writing code like this.  Years ago, I promised myself to never write the words Hashtable or ArrayList in my .Net code again.  They are ugly, mostly depreciated collections that existed before we got generics in C# 2.0.  Now, especially that we have dynamic capabilities in C# 4.0, we can do a lot better than this.  With a relatively small amount of code, you can wrap the Hashtables and Array lists with a dynamic wrapper (wrapper code at the bottom of this post).  The same code can be re-written to look like this: dynamic doc = YamlDoc.Load("Data.yaml"); var title = doc.Recipe.Title; And dynamic doc = YamlDoc.Load("Data.yaml"); foreach (dynamic ingredient in doc.Recipe.Ingredients) { var name = ingredient.Name; } I significantly prefer this code over the previous.  That’s not all… the magic really happens when we take this concept into WPF.  With a single line of code, you can bind to the data dynamically in the view: DataContext = YamlDoc.Load("Data.yaml"); Then, your XAML is extremely straight-forward (Nothing else.  No static types, no adapter code.  Nothing): <StackPanel> <TextBlock Text="{Binding Recipe.Title}" /> <TextBlock Text="{Binding Recipe.Description}" /> <TextBlock Text="{Binding Recipe.Author}" /> <TextBlock Text="{Binding Recipe.TimeToPrepare}" /> <TextBlock Text="Ingredients:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Ingredients}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Quantity}" /> <TextBlock Text=" " /> <TextBlock Text="{Binding Units}" /> <TextBlock Text=" of " /> <TextBlock Text="{Binding Name}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> <TextBlock Text="Steps:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Steps}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Number}" /> <TextBlock Text=": " /> <TextBlock Text="{Binding Description}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> </StackPanel> This nifty XAML binding trick only works in WPF, unfortunately.  Silverlight handles binding differently, so they don’t support binding to dynamic objects as of late (March 2010).  This, in my opinion, is a major lacking feature in Silverlight and I really hope we will see this feature available to us in Silverlight 4 Release.  (I am not very optimistic for Silverlight 4, but I can hope for the feature in Silverlight 5, can’t I?) Conclusion I still have a few things I want to say about using YAML in the .Net space including de-serialization and using IronRuby for your YAML parser, but this post is hopefully enough to see how easy it is to incorporate YAML documents in your code. Codeplex Site for YAML tools Dynamic wrapper for YamlCore

  Read the article

• How to Use Steam In-Home Streaming

  - by Chris Hoffman

  Steam’s In-Home Streaming is now available to everyone, allowing you to stream PC games from one PC to another PC on the same local network. Use your gaming PC to power your laptops and home theater system. This feature doesn’t allow you to stream games over the Internet, only the same local network. Even if you tricked Steam, you probably wouldn’t get good streaming performance over the Internet. Why Stream? When you use Steam In-Home streaming, one PC sends its video and audio to another PC. The other PC views the video and audio like it’s watching a movie, sending back mouse, keyboard, and controller input to the other PC. This allows you to have a fast gaming PC power your gaming experience on slower PCs. For example, you could play graphically demanding games on a laptop in another room of your house, even if that laptop has slower integrated graphics. You could connect a slower PC to your television and use your gaming PC without hauling it into a different room in your house. Streaming also enables cross-platform compatibility. You could have a Windows gaming PC and stream games to a Mac or Linux system. This will be Valve’s official solution for compatibility with old Windows-only games on the Linux (Steam OS) Steam Machines arriving later this year. NVIDIA offers their own game streaming solution, but it requires certain NVIDIA graphics hardware and can only stream to an NVIDIA Shield device. How to Get Started In-Home Streaming is simple to use and doesn’t require any complex configuration — or any configuration, really. First, log into the Steam program on a Windows PC. This should ideally be a powerful gaming PC with a powerful CPU and fast graphics hardware. Install the games you want to stream if you haven’t already — you’ll be streaming from your PC, not from Valve’s servers. (Valve will eventually allow you to stream games from Mac OS X, Linux, and Steam OS systems, but that feature isn’t yet available. You can still stream games to these other operating systems.) Next, log into Steam on another computer on the same network with the same Steam username. Both computers have to be on the same subnet of the same local network. You’ll see the games installed on your other PC in the Steam client’s library. Click the Stream button to start streaming a game from your other PC. The game will launch on your host PC, and it will send its audio and video to the PC in front of you. Your input on the client will be sent back to the server. Be sure to update Steam on both computers if you don’t see this feature. Use the Steam > Check for Updates option within Steam and install the latest update. Updating to the latest graphics drivers for your computer’s hardware is always a good idea, too. Improving Performance Here’s what Valve recommends for good streaming performance: Host PC: A quad-core CPU for the computer running the game, minimum. The computer needs enough processor power to run the game, compress the video and audio, and send it over the network with low latency. Streaming Client: A GPU that supports hardware-accelerated H.264 decoding on the client PC. This hardware is included on all recent laptops and PCs. Ifyou have an older PC or netbook, it may not be able to decode the video stream quickly enough. Network Hardware: A wired network connection is ideal. You may have success with wireless N or AC networks with good signals, but this isn’t guaranteed. Game Settings: While streaming a game, visit the game’s setting screen and lower the resolution or turn off VSync to speed things up. In-Home Steaming Settings: On the host PC, click Steam > Settings and select In-Home Streaming to view the In-Home Streaming settings. You can modify your streaming settings to improve performance and reduce latency. Feel free to experiment with the options here and see how they affect performance — they should be self-explanatory. Check Valve’s In-Home Streaming documentation for troubleshooting information. You can also try streaming non-Steam games. Click Games > Add a Non-Steam Game to My Library on your host PC and add a PC game you have installed elsewhere on your system. You can then try streaming it from your client PC. Valve says this “may work but is not officially supported.” Image Credit: Robert Couse-Baker on Flickr, Milestoned on Flickr

  Read the article

• Remote Debug Windows Azure Cloud Service

  - by Shaun

  Originally posted on: http://geekswithblogs.net/shaunxu/archive/2013/11/02/remote-debug-windows-azure-cloud-service.aspxOn the 22nd of October Microsoft Announced the new Windows Azure SDK 2.2. It introduced a lot of cool features but one of it shocked most, which is the remote debug support for Windows Azure Cloud Service (a.k.a. WACS).   Live Debug is Nightmare for Cloud Application When we are developing against public cloud, debug might be the most difficult task, especially after the application had been deployed. In order to minimize the debug effort, Microsoft provided local emulator for cloud service and storage once the Windows Azure platform was announced. By using local emulator developers could be able run their application on local machine with almost the same behavior as running on Windows Azure, and that could be debug easily and quickly. But when we deployed our application to Azure, we have to use log, diagnostic monitor to debug, which is very low efficient. Visual Studio 2012 introduced a new feature named "anonymous remote debug" which allows any workstation under any user could be able to attach the remote process. This is less secure comparing the authenticated remote debug but much easier and simpler to use. Now in Windows Azure SDK 2.2, we could be able to attach our application from our local machine to Windows Azure, and it's very easy.   How to Use Remote Debugger First, let's create a new Windows Azure Cloud Project in Visual Studio and selected ASP.NET Web Role. Then create an ASP.NET WebForm application. Then right click on the cloud project and select "publish". In the publish dialog we need to make sure the application will be built in debug mode, since .NET assembly cannot be debugged in release mode. I enabled Remote Desktop as I will log into the virtual machine later in this post. It's NOT necessary for remote debug. And selected "advanced settings" tab, make sure we checked "Enable Remote Debugger for all roles". In WACS, a cloud service could be able to have one or more roles and each role could be able to have one or more instances. The remote debugger will be enabled for all roles and all instances if we checked. Currently there's no way for us to specify which role(s) and which instance(s) to enable. Finally click "publish" button. In the windows azure activity window in Visual Studio we can find some information about remote debugger. To attache remote process would be easy. Open the "server explorer" window in Visual Studio and expand "cloud services" node, find the cloud service, role and instance we had just published and wanted to debug, right click on the instance and select "attach debugger". Then after a while (it's based on how fast our Internet connect to Windows Azure Data Center) the Visual Studio will be switched to debug mode. Let's add a breakpoint in the default web page's form load function and refresh the page in browser to see what's happen. We can see that the our application was stopped at the breakpoint. The call stack, watch features are all available to use. Now let's hit F5 to continue the step, then back to the browser we will find the page was rendered successfully.   What Under the Hood Remote debugger is a WACS plugin. When we checked the "enable remote debugger" in the publish dialog, Visual Studio will add two cloud configuration settings in the CSCFG file. Since they were appended when deployment, we cannot find in our project's CSCFG file. But if we opened the publish package we could find as below. At the same time, Visual Studio will generate a certificate and included into the package for remote debugger. If we went to the azure management portal we will find there will a certificate under our application which was created, uploaded by remote debugger plugin. Since I enabled Remote Desktop there will be two certificates in the screenshot below. The other one is for remote debugger. When our application was deployed, windows azure system will open related ports for remote debugger. As below you can see there are two new ports opened on my application. Finally, in our WACS virtual machine, windows azure system will copy the remote debug component based on which version of Visual Studio we are using and start. Our application then can be debugged remotely through the visual studio remote debugger. Below is the task manager on the virtual machine of my WACS application.   Summary In this post I demonstrated one of the feature introduced in Windows Azure SDK 2.2, which is Remote Debugger. It allows us to attach our application from local machine to windows azure virtual machine once it had been deployed. Remote debugger is powerful and easy to use, but it brings more security risk. And since it's only available for debug build this means the performance will be worse than release build. Hence we should only use this feature for staging test and bug fix (publish our beta version to azure staging slot), rather than for production.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Part 1 - 12c Database and WLS - Overview

  - by Steve Felts

  The download of Oracle 12c database became available on June 25, 2013.  There are some big new features in 12c database and WebLogic Server will take advantage of them. Immediately, we will support using 12c database and drivers with WLS 10.3.6 and 12.1.1.  When the next version of WLS ships, additional functionality will be supported (those rows in the table below with all "No" values will get a "Yes).  The following table maps the Oracle 12c Database features supported with various combinations of currently available WLS releases, 11g and 12c Drivers, and 11g and 12c Databases. Feature WebLogic Server 10.3.6/12.1.1 with 11g drivers and 11gR2 DB WebLogic Server 10.3.6/12.1.1 with 11g drivers and 12c DB WebLogic Server 10.3.6/12.1.1 with 12c drivers and 11gR2 DB WebLogic Server 10.3.6/12.1.1 with 12c drivers and 12c DB JDBC replay No No No Yes (Active GridLink only in 10.3.6, add generic in 12.1.1) Multi Tenant Database No Yes (except set container) No Yes (except set container) Dynamic switching between Tenants No No No No Database Resident Connection pooling (DRCP) No No No No Oracle Notification Service (ONS) auto configuration No No No No Global Database Services (GDS) No Yes (Active GridLink only) No Yes (Active GridLink only) JDBC 4.1 (using ojdbc7.jar files & JDK 7) No No Yes Yes  The My Oracle Support (MOS) document covering this is "WebLogic Server 12.1.1 and 10.3.6 Support for Oracle 12c Database [ID 1564509.1]" at the link https://support.oracle.com/epmos/faces/DocumentDisplay?id=1564509.1. The following documents are also key references:12c Oracle Database Developer Guide http://docs.oracle.com/cd/E16655_01/appdev.121/e17620/toc.htm 12c Oracle Database Administrator's Guide http://docs.oracle.com/cd/E16655_01/server.121/e17636/toc.htm . I plan to write some related blog articles not to duplicate existing product documentation but to introduce the features, provide some examples, and tie together some information to make it easier to understand. How do you get started with 12c?  The easiest way is to point your data source at a 12c database.  The only change on the WLS side is to update the URL in your data source (assuming that you are not just upgrading your database).  You can continue to use the 11.2.0.3 driver jar files that shipped with WLS 10.3.6 or 12.1.1.  You shouldn't see any changes in your application.  You can take advantage of enhancements on the database side that don't affect the mid-tier.  On the WLS side, you can take advantage of using Global Data Service or connecting to a tenant in a multi-tenant database transparently. If you want to use the 12c client jar files, it's a bit of work because they aren't shipped with WLS and you can't just drop in ojdbc6.jar as in the old days.  You need to use a matched set of jar files and they need to come before existing jar files in the CLASSPATH.  The MOS article is written from the standpoint that you need to get the jar files directly - download almost 1G and install over 600M footprint to get 15 jar files.  Assuming that you have the database installed and you can get access to the installation (or ask the DBA), you need to copy the 15 jar files to each machine with a WLS installation and get them in your CLASSPATH.  You can play with setting the PRE_CLASSPATH but the more practical approach may be to just update WL_HOME/common/bin/commEnv.sh directly.  There's a change in the transaction completion behavior (read the MOS) so if you think you might run into that, you will want to set -Doracle.jdbc.autoCommitSpecCompliant=false.  Also if you are running with Active GridLink, you must set -Doracle.ucp.PreWLS1212Compatible=true (how's that for telling you that this is fixed in WLS 12.1.2).  Once you get the configuration out of the way, you can start using the new ojdbc7.jar in place of the ojdbc6.jar to get the new JDBC 4.1 API's.  You can also start using Application Continuity.  This feature is also known as JDBC Replay because when a connection fails you get a new one with all JDBC operations up to the failure point automatically replayed.  As you might expect, there are some limitations but it's an interesting feature.  Obviously I'm going to focus on the 12c database features that we can leverage in WLS data source.  You will need to read other sources or the product documentation to get all of the new features.

  Read the article

• Guidance: How to layout you files for an Ideal Solution

  - by Martin Hinshelwood

  Creating a solution and having it maintainable over time is an art and not a science. I like being pedantic and having a place for everything, no matter how small. For setting up the Areas to run Multiple projects under one solution see my post on  When should I use Areas in TFS instead of Team Projects and for an explanation of branching see Guidance: A Branching strategy for Scrum Teams. Update 17th May 2010 – We are currently trialling running a single Sprint branch to improve our history. Whenever I setup a new Team Project I implement the basic version control structure. I put “readme.txt” files in the folder structure explaining the different levels, and a solution file called “[Client].[Product].sln” located at “$/[Client]/[Product]/DEV/Main” within version control. Developers should add any projects you need to create to that solution in the format “[Client].[Product].[ProductArea].[Assembly]” and they will automatically be picked up and built automatically when you setup Automated Builds using Team Foundation Build. All test projects need to be done using MSTest to get proper IDE and Team Foundation Build integration out-of-the-box and be named for the assembly that it is testing with a naming convention of “[Client].[Product].[ProductArea].[Assembly].Tests” Here is a description of the folder layout; this content should be replicated in readme files under version control in the relevant locations so that even developers new to the project can see how to do it. Figure: The Team Project level - at this level there should be a folder for each the products that you are building if you are using Areas correctly in TFS 2010. You should try very hard to avoided spaces as these things always end up in a URL eventually e.g. "Code Auditor" should be "CodeAuditor". Figure: Product Level - At this level there should be only 3 folders (DEV, RELESE and SAFE) all of which should be in capitals. These folders represent the three stages of your application production line. Each of them may contain multiple branches but this format leaves all of your branches at the same level. Figure: The DEV folder is where all of the Development branches reside. The DEV folder will contain the "Main" branch and all feature branches is they are being used. The DEV designation specifies that all code in every branch under this folder has not been released or made ready for release. And feature branches MUST merge (Forward Integrate) from Main and stabilise prior to merging (Reverse Integration) back down into Main and being decommissioned. Figure: In the Feature branching scenario only merges are allowed onto Main, no development can be done there. Once we have a mature product it is important that new features being developed in parallel are kept separate. This would most likely be used if we had more than one Scrum team working on a single product. Figure: when we are ready to do a release of our software we will create a release branch that is then stabilised prior to deployment. This protects the serviceability of of our released code allowing developers to fix bugs and re-release an existing version. Figure: All bugs found on a release are fixed on the release.  All bugs found in a release are fixed on the release and a new deployment is created. After the deployment is created the bug fixes are then merged (Reverse Integration) into the Main branch. We do this so that we separate out our development from our production ready code.  Figure: SAFE or RTM is a read only record of what you actually released. Labels are not immutable so are useless in this circumstance.  When we have completed stabilisation of the release branch and we are ready to deploy to production we create a read-only copy of the code for reference. In some cases this could be a regulatory concern, but in most cases it protects the company building the product from legal entanglements based on what you did or did not release. Figure: This allows us to reference any particular version of our application that was ever shipped.   In addition I am an advocate of having a single solution with all the Project folders directly under the “Trunk”/”Main” folder and using the full name for the project folders.. Figure: The ideal solution If you must have multiple solutions, because you need to use more than one version of Visual Studio, name the solutions “[Client].[Product][VSVersion].sln” and have it reside in the same folder as the other solution. This makes it easier for Automated build and improves the discoverability of your code and its dependencies. Send me your feedback!   Technorati Tags: VS ALM,VSTS Developing,VS 2010,VS 2008,TFS 2010,TFS 2008,TFBS

  Read the article

• Create a Smoother Period Close

  - by Get Proactive Customer Adoption Team

  Untitled Document Do You Use Oracle E-Business Suite Products Involved in Accounting Period Closes? We understand that closing the periods in your system at the end of an accounting period enables your company to make the right business decisions. We also know this requires prior preparation, good procedures, and quality data. To help you meet that need, Oracle E-Business Suite’s proactive support team developed the Period Close Advisor to help your organization conduct a smooth period close for its Oracle E-Business Suite 12 products. The Period Close Advisor is composed of logical steps you can follow, aligned by the business requirement flow. It will help with an orderly close of the product sub-ledgers before posting to the General Ledger. It combines recommendations and industry best practices with tips from subject matter experts for troubleshooting. You will find patches needed and references to assist you during each phase. Get to know the E-Business Suite Period Close Advisor The Period Close Advisor does more than help the users of Oracle E-Business Suite products close their period. You can use it before and throughout the period to stay on track. Proactively it assists you as you set up your company’s period close process. During the period, it helps evaluate your system’s readiness for initiating the period close procedures and prepare the system for a smooth period close experience. The Period Close Advisor gets you to answers when you have questions and gives you the latest news from us on Oracle E-Business Suite’s period close. The Period Close Advisor is the right place to start. How to Use the E-Business Suite Period Close The Period Close Advisor graphically guides you through your period close. The tabs show you the products (also called applications or sub-ledgers) covered, and the product order required for the processing to handle any dependencies between the products. Users of all the products it covers can benefit from the information it contains. Structure of the Period Close Advisor Clicking on a tab gives you the details for that particular step in the process. This includes an overview, showing how the products fit into the overall period close process, and step-by-step information on each phase needed to complete the period close for the tab. You will also find multimedia training and related resources you can access if you need more information. Once you click on any of the phases, you see guidance for that phase. This can include: Tips from the subject-matter experts—here are examples from a Cash Management specialist: “For organizations with high transaction volumes bank statements should be loaded and reconciled on a daily basis.” “The automatic reconciliation process can be set up to create miscellaneous transactions automatically.” References to useful Knowledge Base documents: Information Centers for the products and features FAQs on functionality Known Issues and patches with both the errors and their solutions How-to documents that explain in detail how to use a feature or complete a process White papers that give overview of a feature, list setup required to use the feature, etc. Links to diagnosticsthat help debug issues you may find in a process Additional information and alerts about a process or reports that can help you prevent issues from surfacing This excerpt from the “Process Transaction” phase for the Receivables product lists documents you’ll find helpful. How to Get Started with the Period Close Advisor The Period Close Advisor is a great resource that can be used both as a proactive tool (while setting up your period end procedures) and as the first document to refer to when you encounter an issue during the period close procedures! As mentioned earlier, the order of the product tabs in the Period Close Advisor gives you the recommended order of closing. The first thing to do is to ensure that you are following the prescribed order for closing the period, if you are using more than one sub-ledger. Next, review the information shared in the Evaluate and Prepare and Process Transactions phases. Make sure that you are following the recommended best practices; you have applied the recommended patches, etc. The Reconcile phase gives you the recommended steps to follow for reconciling a sub-ledger with the General Ledger. Ensure that your reconciliation procedure aligns with those steps. At any stage during the period close processing, if you encounter an issue, you can revisit the Period Close Advisor. Choose the product you have an issue with and then select the phase you are in. You will be able to review information that can help you find a solution to the issue you are facing. Stay Informed Oracle updates the Period Close Advisor as we learn of new issues and information. Bookmark the Oracle E-Business Suite Period Close Advisor [ID 335.1] and keep coming back to it for the latest information on period close

  Read the article

• Real-world SignalR example, ditching ghetto long polling

  - by Jeff

  One of the highlights of BUILD last week was the announcement that SignalR, a framework for real-time client to server (or cloud, if you will) communication, would be a real supported thing now with the weight of Microsoft behind it. Love the open source flava! If you aren’t familiar with SignalR, watch this BUILD session with PM Damian Edwards and dev David Fowler. Go ahead, I’ll wait. You’ll be in a happy place within the first ten minutes. If you skip to the end, you’ll see that they plan to ship this as a real first version by the end of the year. Insert slow clap here. Writing a few lines of code to move around a box from one browser to the next is a way cool demo, but how about something real-world? When learning new things, I find it difficult to be abstract, and I like real stuff. So I thought about what was in my tool box and the decided to port my crappy long-polling “there are new posts” feature of POP Forums to use SignalR. A few versions back, I added a feature where a button would light up while you were pecking out a reply if someone else made a post in the interim. It kind of saves you from that awkward moment where someone else posts some snark before you. While I was proud of the feature, I hated the implementation. When you clicked the reply button, it started polling an MVC URL asking if the last post you had matched the last one the server, and it did it every second and a half until you either replied or the server told you there was a new post, at which point it would display that button. The code was not glam: // in the reply setup PopForums.replyInterval = setInterval("PopForums.pollForNewPosts(" + topicID + ")", 1500); // called from the reply setup and the handler that fetches more posts PopForums.pollForNewPosts = function (topicID) { $.ajax({ url: PopForums.areaPath + "/Forum/IsLastPostInTopic/" + topicID, type: "GET", dataType: "text", data: "lastPostID=" + PopForums.currentTopicState.lastVisiblePost, success: function (result) { var lastPostLoaded = result.toLowerCase() == "true"; if (lastPostLoaded) { $("#MorePostsBeforeReplyButton").css("visibility", "hidden"); } else { $("#MorePostsBeforeReplyButton").css("visibility", "visible"); clearInterval(PopForums.replyInterval); } }, error: function () { } }); }; What’s going on here is the creation of an interval timer to keep calling the server and bugging it about new posts, and setting the visibility of a button appropriately. It looks like this if you’re monitoring requests in FireBug: Gross. The SignalR approach was to call a message broker when a reply was made, and have that broker call back to the listening clients, via a SingalR hub, to let them know about the new post. It seemed weird at first, but the server-side hub’s only method is to add the caller to a group, so new post notifications only go to callers viewing the topic where a new post was made. Beyond that, it’s important to remember that the hub is also the means to calling methods at the client end. Starting at the server side, here’s the hub: using Microsoft.AspNet.SignalR.Hubs; namespace PopForums.Messaging { public class Topics : Hub { public void ListenTo(int topicID) { Groups.Add(Context.ConnectionId, topicID.ToString()); } } } Have I mentioned how awesomely not complicated this is? The hub acts as the channel between the server and the client, and you’ll see how JavaScript calls the above method in a moment. Next, the broker class and its associated interface: using Microsoft.AspNet.SignalR; using Topic = PopForums.Models.Topic; namespace PopForums.Messaging { public interface IBroker { void NotifyNewPosts(Topic topic, int lasPostID); } public class Broker : IBroker { public void NotifyNewPosts(Topic topic, int lasPostID) { var context = GlobalHost.ConnectionManager.GetHubContext<Topics>(); context.Clients.Group(topic.TopicID.ToString()).notifyNewPosts(lasPostID); } } } The NotifyNewPosts method uses the static GlobalHost.ConnectionManager.GetHubContext<Topics>() method to get a reference to the hub, and then makes a call to clients in the group matched by the topic ID. It’s calling the notifyNewPosts method on the client. The TopicService class, which handles the reply data from the MVC controller, has an instance of the broker new’d up by dependency injection, so it took literally one line of code in the reply action method to get things moving. _broker.NotifyNewPosts(topic, post.PostID); The JavaScript side of things wasn’t much harder. When you click the reply button (or quote button), the reply window opens up and fires up a connection to the hub: var hub = $.connection.topics; hub.client.notifyNewPosts = function (lastPostID) { PopForums.setReplyMorePosts(lastPostID); }; $.connection.hub.start().done(function () { hub.server.listenTo(topicID); }); The important part to look at here is the creation of the notifyNewPosts function. That’s the method that is called from the server in the Broker class above. Conversely, once the connection is done, the script calls the listenTo method on the server, letting it know that this particular connection is listening for new posts on this specific topic ID. This whole experiment enables a lot of ideas that would make the forum more Facebook-like, letting you know when stuff is going on around you.

  Read the article

• MySQL Connector/Net 6.6.3 Beta 2 has been released

  - by fernando

  MySQL Connector/Net 6.6.3, a new version of the all-managed .NET driver for MySQL has been released.  This is the second of two beta releases intended to introduce users to the new features in the release. This release is feature complete it should be stable enough for users to understand the new features and how we expect them to work.  As is the case with all non-GA releases, it should not be used in any production environment.  It is appropriate for use with MySQL server versions 5.0-5.6. It is now available in source and binary form from http://dev.mysql.com/downloads/connector/net/#downloads and mirror sites (note that not all mirror sites may be up to date at this point-if you can't find this version on some mirror, please try again later or choose another download site.) The 6.6 version of MySQL Connector/Net brings the following new features:   * Stored routine debugging   * Entity Framework 4.3 Code First support   * Pluggable authentication (now third parties can plug new authentications mechanisms into the driver).   * Full Visual Studio 2012 support: everything from Server Explorer to Intellisense&   the Stored Routine debugger. Stored Procedure Debugging ------------------------------------------- We are very excited to introduce stored procedure debugging into our Visual Studio integration.  It works in a very intuitive manner by simply clicking 'Debug Routine' from Server Explorer. You can debug stored routines, functions&   triggers. These release contains fixes specific of the debugger as well as other fixes specific of other areas of Connector/NET:   * Added feature to define initial values for InOut stored procedure arguments.   * Debugger: Fixed Visual Studio locked connection after debugging a routine.   * Fix for bug Cannot Create an Entity with a Key of Type String (MySQL bug #65289, Oracle bug #14540202).   * Fix for bug "CacheServerProperties can cause 'Packet too large' error". MySQL Bug #66578 Orabug #14593547.   * Fix for handling unnamed parameter in MySQLCommand. This fix allows the mysqlcommand to handle parameters without requiring naming (e.g. INSERT INTO Test (id,name) VALUES (?, ?) ) (MySQL Bug #66060, Oracle bug #14499549).   * Fixed end of line issue when debugging a routine.   * Added validation to avoid overwriting a routine backup file when it hasn't changed.   * Fixed inheritance on Entity Framework Code First scenarios. (MySql bug #63920 and Oracle bug #13582335).   * Fixed "Trying to customize column precision in Code First does not work" (MySql bug #65001, Oracle bug #14469048).   * Fixed bug ASP.NET Membership database fails on MySql database UTF32 (MySQL bug #65144, Oracle bug #14495292).   * Fix for MySqlCommand.LastInsertedId holding only 32 bit values (MySql bug #65452, Oracle bug #14171960).   * Fixed "Decimal type should have digits at right of decimal point", now default is 2, and user's changes in     EDM designer are recognized (MySql bug #65127, Oracle bug #14474342).   * Fix for NullReferenceException when saving an uninitialized row in Entity Framework (MySql bug #66066, Oracle bug #14479715).   * Fix for error when calling RoleProvider.RemoveUserFromRole(): causes an exception due to a wrong table being used (MySql bug #65805, Oracle bug #14405338).   * Fix for "Memory Leak on MySql.Data.MySqlClient.MySqlCommand", too many MemoryStream's instances created (MySql bug #65696, Oracle bug #14468204).   * Added ANTLR attribution notice (Oracle bug #14379162).   * Fix for debugger failing when having a routine with an if-elseif-else.   * Also the programming interface for authentication plugins has been redefined. Some limitations remains, due to the current debugger architecture:   * Some MySQL functions cannot be debugged currently (get_lock, release_lock, begin, commit, rollback, set transaction level)..   * Only one debug session may be active on a given server. The Debugger is feature complete at this point. We look forward to your feedback. Documentation ------------------------------------- You can view current Connector/Net documentation at http://dev.mysql.com/doc/refman/5.5/en/connector-net.html You can find our team blog at http://blogs.oracle.com/MySQLOnWindows. You can also post questions on our forums at http://forums.mysql.com/. Enjoy and thanks for the support!

  Read the article

• Subterranean IL: Generics and array covariance

  - by Simon Cooper

  Arrays in .NET are curious beasts. They are the only built-in collection types in the CLR, and SZ-arrays (single dimension, zero-indexed) have their own commands and IL syntax. One of their stranger properties is they have a kind of built-in covariance long before generic variance was added in .NET 4. However, this causes a subtle but important problem with generics. First of all, we need to briefly recap on array covariance. SZ-array covariance To demonstrate, I'll tweak the classes I introduced in my previous posts: public class IncrementableClass { public int Value; public virtual void Increment(int incrementBy) { Value += incrementBy; } } public class IncrementableClassx2 : IncrementableClass { public override void Increment(int incrementBy) { base.Increment(incrementBy); base.Increment(incrementBy); } } In the CLR, SZ-arrays of reference types are implicitly convertible to arrays of the element's supertypes, all the way up to object (note that this does not apply to value types). That is, an instance of IncrementableClassx2[] can be used wherever a IncrementableClass[] or object[] is required. When an SZ-array could be used in this fashion, a run-time type check is performed when you try to insert an object into the array to make sure you're not trying to insert an instance of IncrementableClass into an IncrementableClassx2[]. This check means that the following code will compile fine but will fail at run-time: IncrementableClass[] array = new IncrementableClassx2[1]; array[0] = new IncrementableClass(); // throws ArrayTypeMismatchException These checks are enforced by the various stelem* and ldelem* il instructions in such a way as to ensure you can't insert a IncrementableClass into a IncrementableClassx2[]. For the rest of this post, however, I'm going to concentrate on the ldelema instruction. ldelema This instruction pops the array index (int32) and array reference (O) off the stack, and pushes a pointer (&) to the corresponding array element. However, unlike the ldelem instruction, the instruction's type argument must match the run-time array type exactly. This is because, once you've got a managed pointer, you can use that pointer to both load and store values in that array element using the ldind* and stind* (load/store indirect) instructions. As the same pointer can be used for both input and output to the array, the type argument to ldelema must be invariant. At the time, this was a perfectly reasonable restriction, and maintained array type-safety within managed code. However, along came generics, and with it the constrained callvirt instruction. So, what happens when we combine array covariance and constrained callvirt? .method public static void CallIncrementArrayValue() { // IncrementableClassx2[] arr = new IncrementableClassx2[1] ldc.i4.1 newarr IncrementableClassx2 // arr[0] = new IncrementableClassx2(); dup newobj instance void IncrementableClassx2::.ctor() ldc.i4.0 stelem.ref // IncrementArrayValue<IncrementableClass>(arr, 0) // here, we're treating an IncrementableClassx2[] as IncrementableClass[] dup ldc.i4.0 call void IncrementArrayValue<class IncrementableClass>(!!0[],int32) // ... ret } .method public static void IncrementArrayValue<(IncrementableClass) T>( !!T[] arr, int32 index) { // arr[index].Increment(1) ldarg.0 ldarg.1 ldelema !!T ldc.i4.1 constrained. !!T callvirt instance void IIncrementable::Increment(int32) ret } And the result: Unhandled Exception: System.ArrayTypeMismatchException: Attempted to access an element as a type incompatible with the array. at IncrementArrayValue[T](T[] arr, Int32 index) at CallIncrementArrayValue() Hmm. We're instantiating the generic method as IncrementArrayValue<IncrementableClass>, but passing in an IncrementableClassx2[], hence the ldelema instruction is failing as it's expecting an IncrementableClass[]. On features and feature conflicts What we've got here is a conflict between existing behaviour (ldelema ensuring type safety on covariant arrays) and new behaviour (managed pointers to object references used for every constrained callvirt on generic type instances). And, although this is an edge case, there is no general workaround. The generic method could be hidden behind several layers of assemblies, wrappers and interfaces that make it a requirement to use array covariance when calling the generic method. Furthermore, this will only fail at runtime, whereas compile-time safety is what generics were designed for! The solution is the readonly. prefix instruction. This modifies the ldelema instruction to ignore the exact type check for arrays of reference types, and so it lets us take the address of array elements using a covariant type to the actual run-time type of the array: .method public static void IncrementArrayValue<(IncrementableClass) T>( !!T[] arr, int32 index) { // arr[index].Increment(1) ldarg.0 ldarg.1 readonly. ldelema !!T ldc.i4.1 constrained. !!T callvirt instance void IIncrementable::Increment(int32) ret } But what about type safety? In return for ignoring the type check, the resulting controlled mutability pointer can only be used in the following situations: As the object parameter to ldfld, ldflda, stfld, call and constrained callvirt instructions As the pointer parameter to ldobj or ldind* As the source parameter to cpobj In other words, the only operations allowed are those that read from the pointer; stind* and similar that alter the pointer itself are banned. This ensures that the array element we're pointing to won't be changed to anything untoward, and so type safety within the array is maintained. This is a typical example of the maxim that whenever you add a feature to a program, you have to consider how that feature interacts with every single one of the existing features. Although an edge case, the readonly. prefix instruction ensures that generics and array covariance work together and that compile-time type safety is maintained. Tune in next time for a look at the .ctor generic type constraint, and what it means.

  Read the article

• SOA 11g Technology Adapters – ECID Propagation

  - by Greg Mally

  Overview Many SOA Suite 11g deployments include the use of the technology adapters for various activities including integration with FTP, database, and files to name a few. Although the integrations with these adapters are easy and feature rich, there can be some challenges from the operations perspective. One of these challenges is how to correlate a logical business transaction across SOA component instances. This correlation is typically accomplished via the execution context ID (ECID), but we lose the ECID correlation when the business transaction spans technologies like FTP, database, and files. A new feature has been introduced in the Oracle adapter JCA framework to allow the propagation of the ECID. This feature is available in the forthcoming SOA Suite 11.1.1.7 (PS6). The basic concept of propagating the ECID is to identify somewhere in the payload of the message where the ECID can be stored. Then two Binding Properties, relating to the location of the ECID in the message, are added to either the Exposed Service (left-hand side of composite) or External Reference (right-hand side of composite). This will give the JCA framework enough information to either extract the ECID from or add the ECID to the message. In the scenario of extracting the ECID from the message, the ECID will be used for the new component instance. Where to Put the ECID When trying to determine where to store the ECID in the message, you basically have two options: Add a new optional element to your message schema. Leverage an existing element that is not used in your schema. The best scenario is that you are able to add the optional element to your message since trying to find an unused element will prove difficult in most situations. The schema will be holding the ECID value which looks something like the following: 11d1def534ea1be0:7ae4cac3:13b4455735c:-8000-00000000000002dc Configuring Composite Services/References Now that you have identified where you want the ECID to be stored in the message, the JCA framework needs to have this information as well. The two pieces of information that the framework needs relates to the message schema: The namespace for the element in the message. The XPath to the element in the message. To better understand this, let's look at an example for the following database table: When an Exposed Service is created via the Database Adapter Wizard in the composite, the following schema is created: For this example, the two Binding Properties we add to the ReadRow service in the composite are: <!-- Properties for the binding to propagate the ECID from the database table --> <property name="jca.ecid.nslist" type="xs:string" many="false">  xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/db/top/ReadRow"</property> <property name="jca.ecid.xpath" type="xs:string" many="false">  /ns1:EcidPropagationCollection/ns1:EcidPropagation/ns1:ecid</property> Notice that the property called jca.ecid.nslist contains the targetNamespace defined in the schema and the property called jca.ecid.xpath contains the XPath statement to the element. The XPath statement also contains the appropriate namespace prefix (ns1) which is defined in the jca.ecid.nslist property. When the Database Adapter service reads a row from the database, it will retrieve the ECID value from the payload and remove the element from the payload. When the component instance is created, it will be associated with the retrieved ECID and the payload contains everything except the ECID element/value. The only time the ECID is visible is when it is stored safely in the resource technology like the database, a file, or a queue. Simple Database/File/JMS Example This section contains a simplified example of how the ECID can propagate through a database table, a file, and JMS queue. The composite for the example looks like the following: The flow of this example is as follows: Invoke database insert using the insertwithecidbpelprocess_client_ep Service. The InsertWithECIDBPELProcess adds a row to the database via the Database Adapter. The JCA Framework adds the ECID to the message prior to inserting. The ReadRow Service retrieves the record and the JCA Framework extracts the ECID from the message. The ECID element is removed from the message. An instance of ReadRowBPELProcess is created and it is associated with the retried ECID. The ReadRowBPELProcess now writes the record to the file system via the File Adapter. The JCA Framework adds the ECID to the message prior to writing the message to file. The ReadFile Service retrieves the record from the file system and the JCA Framework extracts the ECID from the message. The ECID element is removed from the message. An instance of ReadFileBPELProcess is created and it is associated with the retried ECID. The ReadFileBPELProcess now enqueues the message via the JMS Adapter. The JCA Framework adds the ECID to the message prior to enqueuing the message. The DequeueMessage Service retrieves the record and the JCA Framework extracts the ECID from the message. The ECID element is removed from the message. An instance of DequeueMessageBPELProcess is created and it is associated with the retried ECID. The logical flow ends. When viewing the Flow Trace in the Enterprise Manger, you will now see all the instances correlated via ECID: Please check back here when SOA Suite 11.1.1.7 is released for this example. With the example you can run it yourself and reinforce what has been shared in this blog via a hands-on experience. One final note: the contents of this blog may be included in the official SOA Suite 11.1.1.7 documentation, but you will still need to come here to get the example.

  Read the article

• WSS 3.0 to SharePoint 2010: Tips for delaying the Visual Upgrade

  - by Kelly Jones

  My most recent project has been to migrate a bunch of sites from WSS 3.0 (SharePoint 2007) to SharePoint Server 2010.  The users are currently working with WSS 3.0 and Office 2003, so the new ribbon based UI in 2010 will be completely new.  My client wants to avoid the new SharePoint 2010 look and feel until they’ve had time to train their users, so we’ve been testing the upgrades by keeping them with the 2007 user interface. Permission to perform the Visual Upgrade One of the first things we noticed was the default permissions for who was allowed to switch the UI from 2007 to 2010.  By default, site collection administrators and site owners can do this.  Since we wanted to more tightly control the timing of the new UI, I added a few lines to the PowerShell script that we are using to perform the migration.  This script creates the web application, sets the User Policy, and then does a Mount-SPDatabase to attach the old 2007 content database to the 2010 farm.  I added the following steps after the Mount-SPDatabase step: #Remove the visual upgrade option for site owners # it remains for Site Collection administrators foreach ($sc in $WebApp.Sites){ foreach ($web in $sc.AllWebs){ #Visual Upgrade permissions for the site/subsite (web) $web.UIversionConfigurationEnabled = $false; $web.Update(); } } These script steps loop through each Site Collection in a particular web application ($WebApp) and then it loops through each subsite ($web) in the Site Collection ($sc) and disables the Site Owner’s permission to perform the Visual Upgrade. This is equivalent to going to the Site Collection administrator settings page –> Visual Upgrade and selecting “Hide Visual Upgrade”. Since only IT people have Site Collection administrator privileges, this will allow IT to control the timing of the new 2010 UI rollout. Newly created subsites Our next issue was brought to our attention by SharePoint Joel’s blog post last week (http://www.sharepointjoel.com/Lists/Posts/Post.aspx?ID=524 ).  In it, he lists some updates about the 2010 upgrade, and his fourth point was one that I hadn’t seen yet: 4. If a 2007 upgraded site has not been visually upgraded, the sites created underneath it will look like 2010 sites – While this is something I’ve been aware of, I think many don’t realize how this impacts common look and feel for master pages, and how it impacts good navigation and UI. As well depending on your patch level you may see hanging behavior in the list picker. The site and list creation Silverlight control in Internet Explorer is looking for resources that don’t exist in the galleries in the 2007 site, and hence it continues to spin and spin and eventually time out. The work around is to upgrade to SP1, or use Chrome or Firefox which won’t attempt to render the Silverlight control. When the root site collection is a 2007 site and has it’s set of galleries and the children are 2010 sites there is some strange behavior linked to the way that the galleries work and pull from the parent. Our production SharePoint 2010 Farm has SP1 installed, as well as the December 2011 Cumulative Update, so I think the “hanging behavior” he mentions won’t affect us. However, since we want to control the roll out of the UI, we are concerned that new subsites will have the 2010 look and feel, no matter what the parent site has. Ok, time to dust off my developer skills. I first looked into using feature stapling, but I couldn’t get that to work (although I’m pretty sure I had everything wired up correctly).  Then I stumbled upon SharePoint 2010’s web events – a great way to handle this. Using Visual Studio 2010, I created a new SharePoint project and added a Web Event Receiver: In the Event Receiver class, I used the WebProvisioned method to check if the parent site is a 2007 site (UIVersion = 3), and if so, then set the newly created site to 2007:   /// <summary> /// A site was provisioned. /// </summary> public override void WebProvisioned(SPWebEventProperties properties) { base.WebProvisioned(properties);   try { SPWeb curweb = properties.Web;   if (curweb.ParentWeb != null) {   //check if the parent website has the 2007 look and feel if (curweb.ParentWeb.UIVersion == 3) { //since parent site has 2007 look and feel // we'll apply that look and feel to the current web curweb.UIVersion = 3; curweb.Update(); } } } catch (Exception) { //TODO: Add logging for errors } }   This event is part of a Feature that is scoped to the Site Level (Site Collection).  I added a couple of lines to my migration PowerShell script to activate the Feature for any site collections that we migrate. Plan Going Forward The plan going forward is to perform the visual upgrade after the users for a particular site collection have gone through 2010 training. If we need to do several site collections at once, we’ll use a PowerShell script to loop through each site collection to update the sites to 2010.  If it’s just one or two, we’ll be using the “Update All Sites” button on the Visual Upgrade page for Site Collection Administrators. The custom code for newly created sites won’t need to be changed, since it relies on the UI version of the parent site.  If the parent is 2010, then the new site will look 2010.

  Read the article

• Profiling Startup Of VS2012 &ndash; YourKit Profiler

  - by Alois Kraus

  The YourKit (v7.0.5) profiler is interesting in terms of price (79€ single place license, 409€ + 1 year support and upgrades) and feature set. You do get a performance and memory profiler in one package for which you normally need also to pay extra from the other vendors. As an interesting side note the profiler UI is written in Java because they do also sell Java profilers with the same feature set. To get all methods of a VS startup you need first to configure it to include System* in the profiled methods and you need to configure * to measure wall clock time. By default it does record only CPU times which allows you to optimize CPU hungry operations. But you will never see a Thread.Sleep(10000) in the profiler blocking the UI in this mode. It can profile as all others processes started from within the profiler but it can also profile the next or all started processes. As usual it can profile in sampling and tracing mode. But since it is a memory profiler as well it does by default also record all object allocations > 1MB. With allocation recording enabled VS2012 did crash but without allocation recording there were no problems. The CPU tab contains the time line of the application and when you click in the graph you the call stacks of all threads at this time. This is really a nice feature. When you select a time region you the CPU Usage estimation for this time window. I have seen many applications consuming 100% CPU only because they did create garbage like crazy. For this is the Garbage Collection tab interesting in conjunction with a time range. This view is like the CPU table only that the CPU graph (green) is missing. All relevant information except for GCs/s is already visible in the CPU tab. Very handy to pinpoint excessive GC or CPU bound issues. The Threads tab does show the thread names and their lifetime. This is useful to see thread interactions or which thread is hottest in terms of CPU consumption. On the CPU tab the call tree does exist in a merged and thread specific view. When you click on a method you get below a list of all called methods. There you can sort for methods with a high own time which are worth optimizing. In the Method List you can select which scope you want to see. Back Traces are the methods which did call you. Callees ist the list of methods called directly or indirectly by your method as a flat list. This is not a call stack but still very useful to see which methods were slow so you can see the “root” cause quite quickly without the need to click trough long call stacks. The last view Merged Calles is a call stacked view of the previous view. This does help a lot to understand did call each method at run time. You would get the same view with a debugger for one call invocation but here you get the full statistics (invocation count) as well. Since YourKit is also a memory profiler you can directly see which objects you have on your managed heap and which objects do hold most of your precious memory. You can in in the Object Explorer view also examine the contents of your objects (strings or whatsoever) to get a better understanding which objects where potentially allocating this stuff.   YourKit is a very easy to use combined memory and performance profiler in one product. The unbeatable single license price makes it very attractive to straightly buy it. Although it is a Java UI it is very responsive and the memory consumption is considerably lower compared to dotTrace and ANTS profiler. What I do really like is to start the YourKit ui and then start the processes I want to profile as usual. There is no need to alter your own application code to be able to inject a profiler into your new started processes. For performance and memory profiling you can simply select the process you want to investigate from the list of started processes. That's the way I like to use profilers. Just get out of the way and let the application run without any special preparations.   Next: Telerik JustTrace

  Read the article

• Application Composer Series: Where and When to use Groovy

  - by Richard Bingham

  This brief post is really intended as more of a reference than an article. The table below highlights two things, firstly where you can add you own custom logic via groovy code (end column), and secondly (middle column) when you might use each particular feature. Obviously this applies only where Application Composer exists, namely Fusion CRM and Oracle Sales Cloud, and is based on current (release 8) functionality. Feature Most Common Use Case Groovy Field Triggers React to run-time data changes. Only fired when the field is changed and upon submit. Y Object Triggers To extend the standard processing logic for an object, based on record creation, updates and deletes. There is a split between these firing events, with some related to UI/ADF actions and others originating in the database. UI Trigger Points: After Create - fires when a new object record is created. Commonly used to set default values for fields. Before Modify - Fires when the end-user tries to modify a field value. Could be used for generic warnings or extra security logic. Before Invalidate - Fires on the parent object when one of its child object records is created, updated, or deleted. For building in relationship logic. Before Remove - Fires when an attempt is made to delete an object record. Can be used to create conditions that prevent deletes. Database Trigger Points: Before Insert in Database - Fires before a new object is inserted into the database. Can be used to ensure a dependent record exists or check for duplicates. After Insert in Database - Fires after a new object is inserted into the database. Could be used to create a complementary record. Before Update in Database -Fires before an existing object is modified in the database. Could be used to check dependent record values. After Update in Database - Fires after an existing object is modified in the database. Could be used to update a complementary record. Before Delete in Database - Fires before an existing object is deleted from the database. Could be used to check dependent record values. After Delete in Database - Fires after an existing object is deleted from the database. Could be used to remove dependent records. After Commit in Database - Fires after the change pending for the current object (insert, update, delete) is made permanent in the current transaction. Could be used when committed data that has passed all validation is required. After Changes Posted to Database - Fires after all changes have been posted to the database, but before they are permanently committed. Could be used to make additional changes that will be saved as part of the current transaction. Y Field Validation Displays a user entered error message based groovy logic validating the field value. The message is shown only when the validation logic returns false, and the logic is triggered only when tabbing out of the field on the user interface. Y Object Validation Commonly used where validation is needed across multiple related fields on the object. Triggered on the submit UI action. Y Object Workflows All Object Workflows are fired upon either record creation or update, along with the option of adding a custom groovy firing condition. Y Field Updates - change another field when a specified one changes. Intended as an easy way to set different run-time values (e.g. pick values for LOV's) plus the value field permits groovy logic entry. Y E-Mail Notification - sends an email notification to specified users/roles. Templates support using run-time value tokens and rich text. N Task Creation - for adding standard tasks for use in the worklist functionality. N Outbound Message - will create and send an XML payload of the related object SDO to a specified endpoint. N Business Process Flow - intended for approval using the seeded process, however can also trigger custom BPMN flows. N Global Functions Utility functions that can be called from any groovy code in Application Composer (across applications). Y Object Functions Utility functions that are local to the parent object. Usually triggered from within 'Buttons and Actions' definitions in Application Composer, although can be called from other code for that object (e.g. from a trigger). Y Add Custom Fields When adding custom fields there are a few places you can include groovy logic. Y Default Value - to add logic within setting the default value when new records are entered. Y Conditionally Updateable - to add logic to set the field to read-only or not. Y Conditionally Required - to add logic to set the field to required or not. Y Formula Field - Used to provide a new aggregate field that is entirely based on groovy logic and other field values. Y Simplified UI Layouts - Advanced Expressions Used for creating dynamic layouts for simplified UI pages where fields and regions show/hide based on run-time context values and logic. Also includes support for the depends-on feature as a trigger. Y Related References This Blog: Application Composer Series Extending Sales Guide: Using Groovy Scripts Groovy Scripting Reference Guide

  Read the article

• Windows Phone 8 Announcement

  - by Tim Murphy

  As if the Surface announcement on Monday wasn’t exciting enough, today Microsoft announce that Windows Phone 8 will be coming this fall.  That itself is great news, but the features coming were like confetti flying in all different directions.  Given this speed I couldn’t capture every feature they covered.  A summary of what I did capture is listed below starting with their eight main features. Common Core The first thing that they covered is that Windows Phone 8 will share a core OS with Windows 8.  It will also run natively on multiple cores.  They mentioned that they have run it on up to 64 cores to this point.  The phones as you might expect will at least start as dual core.  If you remember there were metrics saying that Windows Phone 7 performed operations faster on a single core than other platforms did with dual cores.  The metrics they showed here indicate that Windows Phone 8 runs faster on comparable dual core hardware than other platforms. New Screen Resolutions Screen resolution has never been an issue for me, but it has been a criticism of Windows Phone 7 in the media.  Windows Phone 8 will supports three screen resolutions: WVGA 800 x 480, WXGA 1280 x 768, and 720 1280x720.  Hopefully this makes pixel counters a little happier. MicroSD Support This was one of my pet peeves when I got my Samsung Focus. With Windows Phone 8 the operating system will support adding MicroSD cards after initial setup.  Of course this is dependent on the hardware company on implementing it, but I think we have seen that even feature phone manufacturers have not had a problem supporting this in the past. NFC NFC has been an anticipated feature for some time.  What Microsoft showed today included the fact that they didn’t just want it to be for the phone.  There is cross platform NFC functionality between Windows Phone 8 and Windows 8.  The demos , while possibly a bit fanciful, showed would could be achieved even in a retail environment.  We are getting closer and closer to a Minority Report world with these technologies. Wallet Windows Phone 8 isn’t the first platform to have a wallet concept.  What they have done to differentiate themselves is to make it sot that it is not dependent on a SIM type chip like other platforms.  They have also expanded the concept beyond just banks to other types of credits such as airline miles. Nokia Mapping People have been envious of the Lumia phones having the Nokia mapping software.  Now all Windows Phone 8 devices will use NavTeq data and will have the capability to run in an offline fashion.  This is a major step forward from the Bing “touch for the next turn” maps. IT Administration The lack of features for enterprise administration and deployment was a complaint even before the Windows Phone 7 was released.  With the Windows Phone 8 release such features as Bitlocker and Secure boot will be baked into the OS. We will also have the ability to privately sign and distribute applications. Changing Start Screen Joe Belfiore made a big deal about this aspect of the new release.  Users will have more color themes available to them and the live tiles will be highly customizable. You will have the ability to resize and organize the tiles in a more dynamic way.  This allows for less important tiles or ones with less information to be made smaller.  And There Is More So what other tidbits came out of the presentation?  Later this summer the API for WP8 will be available.  There will be developer events coming to a city near you.  Another announcement of interest to developers is the ability to write applications at a native code level.  This is a boon for game developers and those who need highly efficient applications. As a topper on the cake there was mention of in app payment. On the consumer side we also found out that all updates will be available over the air.  Along with this came the fact that Microsoft will support all devices with updates for at least 18 month and you will be able to subscribe for early updates.  Update coming for Windows Phone 7.5 customers to WP7.8.  The main enhancement will be the new live tile features.  The big bonus is that the update will bypass the carriers.  I would assume though that you will be brought up to date with all previous patches that your carrier may not have released. There is so much more, but that is enough for one post.  Needless to say, EXCITING! del.icio.us Tags: Windows Phone 8,WP8,Windows Phone 7,WP7,Announcements,Microsoft

  Read the article

• WMemoryProfiler is Released

  - by Alois Kraus

  What is it? WMemoryProfiler is a managed profiling Api to aid integration testing. This free library can get managed heap statistics and memory usage for your own process (remember testing) and other processes as well. The best thing is that it does work from .NET 2.0 up to .NET 4.5 in x86 and x64. To make it more interesting it can attach to any running .NET process. The reason why I do mention this is that commercial profilers do support this functionality only for their professional editions. An normally only since .NET 4.0 since the profiling API only since then does support attaching to a running process. This thing does differ in many aspects from “normal” profilers because while profiling yourself you can get all objects from all managed heaps back as an object array. If you ever wanted to change the state of an object which does only exist a method local in another thread you can get your hands on it now … Enough theory. Show me some code /// <summary> /// Show feature to not only get statisics out of a process but also the newly allocated /// instances since the last call to MarkCurrentObjects. /// GetNewObjects does return the newly allocated objects as object array /// </summary> static void InstanceTracking() { using (var dumper = new MemoryDumper()) // if you have problems use to see the debugger windows true,true)) { dumper.MarkCurrentObjects(); Allocate(); ILookup<Type, object> newObjects = dumper.GetNewObjects() .ToLookup( x => x.GetType() ); Console.WriteLine("New Strings:"); foreach (var newStr in newObjects[typeof(string)] ) { Console.WriteLine("Str: {0}", newStr); } } } … New Strings: Str: qqd Str: String data: Str: String data: 0 Str: String data: 1 … This is really hot stuff. Not only you can get heap statistics but you can directly examine the new objects and make queries upon them. When I do find more time I can reconstruct the object root graph from it from my own process. It this cool or what? You can also peek into the Finalization Queue to check if you did accidentally forget to dispose a whole bunch of objects … /// <summary> /// .NET 4.0 or above only. Get all finalizable objects which are ready for finalization and have no other object roots anymore. /// </summary> static void NotYetFinalizedObjects() { using (var dumper = new MemoryDumper()) { object[] finalizable = dumper.GetObjectsReadyForFinalization(); Console.WriteLine("Currently {0} objects of types {1} are ready for finalization. Consider disposing them before.", finalizable.Length, String.Join(",", finalizable.ToLookup( x=> x.GetType() ) .Select( x=> x.Key.Name)) ); } } How does it work? The W of WMemoryProfiler is a good hint. It does employ Windbg and SOS dll to do the heavy lifting and concentrates on an easy to use Api which does hide completely Windbg. If you do not want to see Windbg you will never see it. In my experience the most complex thing is actually to download Windbg from the Windows 8 Stanalone SDK. This is described in the Readme and the exception you are greeted with if it is missing in much greater detail. So I will not go into this here.   What Next? Depending on the feedback I do get I can imagine some features which might be useful as well Calculate first order GC Roots from the actual object graph Identify global statics in Types in object graph Support read out of finalization queue of .NET 2.0 as well. Support Memory Dump analysis (again a feature only supported by commercial profilers in their professional editions if it is supported at all) Deserialize objects from a memory dump into a live process back (this would need some more investigation but it is doable) The last item needs some explanation. Why on earth would you want to do that? The basic idea is to store in your live process some logging/tracing data which can become quite big but since it is never written to it is very fast to generate. When your process crashes with a memory dump you could transfer this data structure back into a live viewer which can then nicely display your program state at the point it did crash. This is an advanced trouble shooting technique I have not seen anywhere yet but it could be quite useful. You can have here a look at the current feature list of WMemoryProfiler with some examples.   How To Get Started? First I would download the released source package (it is tiny). And compile the complete project. Then you can compile the Example project (it has this name) and uncomment in the main method the scenario you want to check out. If you are greeted with an exception it is time to install the Windows 8 Standalone SDK which is described in great detail in the exception text. Thats it for the first round. I have seen something more limited in the Java world some years ago (now I cannot find the link anymore) but anyway. Now we have something much better.

  Read the article

• Navigate Quickly with JustCode and Ctrl+Click

  Ctrl + Click is a widely used shortcut for Go To Definition in many development environments but not in Visual Studio. We, the JustCode team, find it really useful so we added it to Visual Studio. But we didn't stop there - we improved it even further. Read on to find the details. With JustCode you get an enhanced Go To Definition. By default you can execute it in the Visual Studio editor using one of the following shortcuts: Middle Click, Ctrl+Left Click, F12, Ctrl+Enter, Ctrl+B. The first usage of this feature is not much different from the default Visual Studio Go To Definition command use it where a member, type, method, property, etc is used to navigate to the definition of that item. For example, if you have this method:         public void Start()         {             lion = new Lion();             lion.Roar();         } If you hold Ctrl and click on the usage of the lion you will go to the lion member definition. If you hold Ctrl and click on the Lion you will go to the Lion class definition. What we added is the ability to easily find all the usages of the item you just navigated to. For example:     public class Lion     {         public void Roar()         {             Console.WriteLine("Rhaaaar");         }     }   If you hold Ctrl and click on the Lion definition you will see all the usages of the Lion type; if you click on the Roar method definition you will see all the usages of the Roar method: And if there is only one usage you will get automatically to that usage. In the examples I use C#, but it works also in VB.NET, JavaScript, ASP.NET and XAML. Why we like this feature? Let me first start with how the Ctrl+Click (or Go To Definition command) is used. We noticed that developers use it especially in what we call "code browsing sessions". In simple words this is when you browse around the code looking for a bug, just reading the code or searching for something. Sounds familiar? In our experience when you go to the definition of some item you often want to know more about it and the first thing you need is to find its usages. With JustCode this is just one click away. Why Ctrl+Click/Middle Click over F12/Ctrl+Enter/Ctrl+B? Actually you can use all of them. But during these "code browsing sessions" we noticed that most developers use the mouse. So the mouse is already in use and pressing Ctrl+Click (or the Middle Click) is so natural. During heavy coding sessions or if you are a keyboard type developer F12 (or any of the other keyboard shortcuts) is the key. We really use heavily this feature not only in our team but in the whole company. It saves us a bit of time many times a day. And it adds up. We hope you will like it too. Your feedback is more than welcome for us. P.S. If you dont want JustCode to capture the Ctrl+Click and the Middle Click in the editor, you can change that in JustCode->Options->General in the Navigation group. Keyboard shortcuts can be reassigned using the Visual Studio keyboard shortcuts editor.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Data Source Security Part 4

  - by Steve Felts

  So far, I have covered Client Identity and Oracle Proxy Session features, with WLS or database credentials.  This article will cover one more feature, Identify-based pooling.  Then, there is one more topic to cover - how these options play with transactions.Identity-based Connection Pooling An identity based pool creates a heterogeneous pool of connections.  This allows applications to use a JDBC connection with a specific DBMS credential by pooling physical connections with different DBMS credentials.  The DBMS credential is based on either the WebLogic user mapped to a database user or the database user directly, based on the “use database credentials” setting as described earlier. Using this feature enabled with “use database credentials” enabled seems to be what is proposed in the JDBC standard, basically a heterogeneous pool with users specified by getConnection(user, password). The allocation of connections is more complex if Enable Identity Based Connection Pooling attribute is enabled on the data source.  When an application requests a database connection, the WebLogic Server instance selects an existing physical connection or creates a new physical connection with requested DBMS identity. The following section provides information on how heterogeneous connections are created:1. At connection pool initialization, the physical JDBC connections based on the configured or default “initial capacity” are created with the configured default DBMS credential of the data source.2. An application tries to get a connection from a data source.3a. If “use database credentials” is not enabled, the user specified in getConnection is mapped to a DBMS credential, as described earlier.  If the credential map doesn’t have a matching user, the default DBMS credential is used from the datasource descriptor.3b. If “use database credentials” is enabled, the user and password specified in getConnection are used directly.4. The connection pool is searched for a connection with a matching DBMS credential.5. If a match is found, the connection is reserved and returned to the application.6. If no match is found, a connection is created or reused based on the maximum capacity of the pool: - If the maximum capacity has not been reached, a new connection is created with the DBMS credential, reserved, and returned to the application.- If the pool has reached maximum capacity, based on the least recently used (LRU) algorithm, a physical connection is selected from the pool and destroyed. A new connection is created with the DBMS credential, reserved, and returned to the application. It should be clear that finding a matching connection is more expensive than a homogeneous pool.  Destroying a connection and getting a new one is very expensive.  If you can use a normal homogeneous pool or one of the light-weight options (client identity or an Oracle proxy connection), those should be used instead of identity based pooling. Regardless of how physical connections are created, each physical connection in the pool has its own DBMS credential information maintained by the pool. Once a physical connection is reserved by the pool, it does not change its DBMS credential even if the current thread changes its WebLogic user credential and continues to use the same connection. To configure this feature, select Enable Identity Based Connection Pooling.  See http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jdbc/jdbc_datasources/EnableIdentityBasedConnectionPooling.html  "Enable identity-based connection pooling for a JDBC data source" in Oracle WebLogic Server Administration Console Help. You must make the following changes to use Logging Last Resource (LLR) transaction optimization with Identity-based Pooling to get around the problem that multiple users will be accessing the associated transaction table.- You must configure a custom schema for LLR using a fully qualified LLR table name. All LLR connections will then use the named schema rather than the default schema when accessing the LLR transaction table.  - Use database specific administration tools to grant permission to access the named LLR table to all users that could access this table via a global transaction. By default, the LLR table is created during boot by the user configured for the connection in the data source. In most cases, the database will only allow access to this user and not allow access to mapped users. Connections within Transactions Now that we have covered the behavior of all of these various options, it’s time to discuss the exception to all of the rules.  When you get a connection within a transaction, it is associated with the transaction context on a particular WLS instance. When getting a connection with a data source configured with non-XA LLR or 1PC (using the JTS driver) with global transactions, the first connection obtained within the transaction is returned on subsequent connection requests regardless of the values of username/password specified and independent of the associated proxy user session, if any. The connection must be shared among all users of the connection when using LLR or 1PC. For XA data sources, the first connection obtained within the global transaction is returned on subsequent connection requests within the application server, regardless of the values of username/password specified and independent of the associated proxy user session, if any.  The connection must be shared among all users of the connection within a global transaction within the application server/JVM.

  Read the article

• Using XA Transactions in Coherence-based Applications

  - by jpurdy

  While the costs of XA transactions are well known (e.g. increased data contention, higher latency, significant disk I/O for logging, availability challenges, etc.), in many cases they are the most attractive option for coordinating logical transactions across multiple resources. There are a few common approaches when integrating Coherence into applications via the use of an application server's transaction manager: Use of Coherence as a read-only cache, applying transactions to the underlying database (or any system of record) instead of the cache. Use of TransactionMap interface via the included resource adapter. Use of the new ACID transaction framework, introduced in Coherence 3.6.   Each of these may have significant drawbacks for certain workloads. Using Coherence as a read-only cache is the simplest option. In this approach, the application is responsible for managing both the database and the cache (either within the business logic or via application server hooks). This approach also tends to provide limited benefit for many workloads, particularly those workloads that either have queries (given the complexity of maintaining a fully cached data set in Coherence) or are not read-heavy (where the cost of managing the cache may outweigh the benefits of reading from it). All updates are made synchronously to the database, leaving it as both a source of latency as well as a potential bottleneck. This approach also prevents addressing "hot data" problems (when certain objects are updated by many concurrent transactions) since most database servers offer no facilities for explicitly controlling concurrent updates. Finally, this option tends to be a better fit for key-based access (rather than filter-based access such as queries) since this makes it easier to aggressively invalidate cache entries without worrying about when they will be reloaded. The advantage of this approach is that it allows strong data consistency as long as optimistic concurrency control is used to ensure that database updates are applied correctly regardless of whether the cache contains stale (or even dirty) data. Another benefit of this approach is that it avoids the limitations of Coherence's write-through caching implementation. TransactionMap is generally used when Coherence acts as system of record. TransactionMap is not generally compatible with write-through caching, so it will usually be either used to manage a standalone cache or when the cache is backed by a database via write-behind caching. TransactionMap has some restrictions that may limit its utility, the most significant being: The lock-based concurrency model is relatively inefficient and may introduce significant latency and contention. As an example, in a typical configuration, a transaction that updates 20 cache entries will require roughly 40ms just for lock management (assuming all locks are granted immediately, and excluding validation and writing which will require a similar amount of time). This may be partially mitigated by denormalizing (e.g. combining a parent object and its set of child objects into a single cache entry), at the cost of increasing false contention (e.g. transactions will conflict even when updating different child objects). If the client (application server JVM) fails during the commit phase, locks will be released immediately, and the transaction may be partially committed. In practice, this is usually not as bad as it may sound since the commit phase is usually very short (all locks having been previously acquired). Note that this vulnerability does not exist when a single NamedCache is used and all updates are confined to a single partition (generally implying the use of partition affinity). The unconventional TransactionMap API is cumbersome but manageable. Only a few methods are transactional, primarily get(), put() and remove(). The ACID transactions framework (accessed via the Connection class) provides atomicity guarantees by implementing the NamedCache interface, maintaining its own cache data and transaction logs inside a set of private partitioned caches. This feature may be used as either a local transactional resource or as logging XA resource. However, a lack of database integration precludes the use of this functionality for most applications. A side effect of this is that this feature has not seen significant adoption, meaning that any use of this is subject to the usual headaches associated with being an early adopter (greater chance of bugs and greater risk of hitting an unoptimized code path). As a result, for the moment, we generally recommend against using this feature. In summary, it is possible to use Coherence in XA-oriented applications, and several customers are doing this successfully, but it is not a core usage model for the product, so care should be taken before committing to this path. For most applications, the most robust solution is normally to use Coherence as a read-only cache of the underlying data resources, even if this prevents taking advantage of certain product features.

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >