Search Results

Search found 7628 results on 306 pages for 'internal communications'.

Page 73/306 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• Rpm removal does not remove delivered dirs and leaves garbage

  - by Jim

  I deliver an application via an RPM. This application delivers various directories and files. E.g. under /opt/internal/com a file structure is being copied. I was expecting that on rpm -e all the file structure delivered under /opt/internal/com will be removed. But it does not. There are directories in the file structure that are non-empty. Is this the reason? But these (non-empty) directories were created by the RPM installation. So I would expect that they would be "owned" by RPM and removed automatically. Is this wrong? Am I supposed to remove them manually?

  Read the article

• Establish connection with an IP camera behind a modem-router assigned with a private IP by Internet Service Provider?

  - by silvernightstar

  Most solutions out there require the modem-router to have been assigned a public IP by the ISP. After which, one can access the IP camera via a portforward setting on the router. However, my ISP only provides private IPs internal to their system (they probably have a limited pool of public IPs). So I am unable to view my IP cameras in the way described. I'm wondering if there's a way to work around this problem without having to need a public IP. Since, after all, two users on Yahoo Messenger or Facebook Chat are able to find one another and exchange data despite both sides being within the internal networks of their respective ISPs. Given that I only plan to view my IP cameras via iOS or Android running on a smartphone or tablet, any ready-to-use solutions out there?

  Read the article

• It's the ethernet 10/100 in LAN transfer faster than USB 1.0?

  - by dag729

  I have an old laptop (PIII 800MHz, with 256 RAM) that I wish to use as my home server: it'll have to serve just two people, so I think that I'll be more than ok as for the RAM and the CPU. The issue is about data, because the internal hard disk is a 12GB, that is...ridicolous! I have more than 60GB of mixed storage and counting (images, videos and music) in an external usb hd. I could put the hd in my desktop pc just to serve the big files through ethernet or let it inside its usb box attached to the laptop. The question is: which of these solutions will be the fastest? USB 1.0 attached to the server (laptop) or internal hard disk serving files via 10/100 ethernet to the laptop on demand?

  Read the article

• Using m0n0wall in a VM for testing.

  - by tombull89

  I'd like to use m0n0wall inside a (VirtualBox) VM to play about with and see what it can do. Ultimately the goal is to have a number of virtual machines connected to a internal virtual network which goes through to the m0n0wall VM, and then the m0n0wall box connected to the internet through NAT or a bridged addaptor on my host machine. I can find out how to set the LAN and WAN addresses, but this seems to be only for using m0n0wall as a router intead of attached to another router. Let's see if I can diagram this: [Virtual Machine]---Internal (VM Only) Network ---[m0n0wall VM]---Bridged/NAT Addaptor---["real" router]---Internet. Can anybody suggest how I should do this or am I thinking m0n0wall isn't meant to be used like this?

  Read the article

• Conflicts between 2 NICs

  - by funbi_grace

  Hi, I have an HP server (Windows server 2003) with 2 external NICs (couldn't get the builtin NIC to work). One is for an internal network of 4 PCs and the other is for part of an Internet-facing network. Many times a day, we have to disable the internal NIC in order to get the other NIC to see the network. I know this is happening on a server, but the issue is more related to the conflicts on the NICs. Any suggestions from the community on where to look for a solution?

  Read the article

• Serving protected files using Nginx's X-Accel-Redirect header

  - by andybak

  I'm trying to serve protected files using this directive in my nginx.conf: location /secure/ { internal; alias /home/ldr/webapps/nginx/app/secure/; } I'm passing in paths in the form: "/myfile.doc" and the file's path would be: /home/ldr/webapps/nginx/app/secure/myfile.doc I just get 404's when I access "http: //myserver/secure/myfile.doc" (space inserted after http to stop ServerFault converting it to a link) I've tried taking the trailing / off the location directive and that makes no difference. Two questions: How do I fix it! How can I debug problems like this myself? How can I get Nginx to report which path it's looking for? error.log shows nothing and access.log just tells me which url is being requested - this is the bit I already know! It's no fun trying things randomly without any feedback. Here's my entire nginx.conf: daemon off; worker_processes 2; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; server { listen 21534; server_name my.server.com; client_max_body_size 5m; location /media/ { alias /home/ldr/webapps/nginx/app/media/; } location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; fastcgi_pass unix:/home/ldr/webapps/nginx/app/myproject/django.sock; fastcgi_pass_header Authorization; fastcgi_hide_header X-Accel-Redirect; fastcgi_hide_header X-Sendfile; fastcgi_intercept_errors off; include fastcgi_params; } location /secure { internal; alias /home/ldr/webapps/nginx/app/secure/; } } } EDIT: I'm trying some of the suggestions here So I've tried: location /secure/ { internal; alias /home/ldr/webapps/nginx/app/; } both with and without the trailing slash on location. I've also tried moving this block before the "location /" directive. The page I linked to has ^~ after 'location' giving: location ^~ /secure/ { ...etc... Not sure what that signifies but it didn't work either!

  Read the article

• Safari 7 SSL error if using IP-adress

  - by K. Biermann

  I have created my own CA for internal usage and set the root certificate to trustworthy on my machines. With this CA I signed the SSL-certificates for my internal servers. I only address them with their IP and so I used the servers' IP as certificate name. If i connect to the Servers with Chrome or mobile Safari it works without problems, but if I use Safari 7 under Mavericks (on the same machine with the same keychain) i get the following error: "The certificate is not valid (host name mismatch)". I double checked that I entered the correct IP ("https://192.168.2.130"), but I always get the same error. Do I need to enter a different name for the certificate or is it just that Safari doesn't support SSL certificates for IPs? Here is a screenshot of the error message (I can only post images with at least 10 rep): Safari's error message Thanks in advantage and please excuse my bad English :D

  Read the article

• Slot load DVD burner options for standard desktop case

  - by Michael Kohne

  I need a new DVD burner (internal) for my father-in-law's computer. He's apparently broken the current one - he forgot to push the tray back in after doing something and hit it with his chair. Given this, I'd like to get him a slot-loading DVD burner, so as to avoid the problem entirely. I need an internal device, and I'll be mounting in a 5 1/4" bay. He doesn't need any super-spec device - as long as it can read/write all the standard formats, it's good. I see a few options at newegg.com, but they all have mixed reviews. Are there any out there that are generally seen as reliable? How does one go about mounting slimline devices in a standard 5 1/4" bay? Is there a standard faceplate kit for that?

  Read the article

• In-house Trusted Certificate

  - by MrEdmundo

  Hi there I'm a developer looking at introducing ClickOnce deployment for an internal .NET Winforms application that will be distributed via the corporate network. Now I would like to deploy this application under the full trust model however in order for that to happen I need to sign the software with a certificate. I can do that with a "test" certificate that has no information of the publisher etc, however that means an extra step will occur on the users workstation where they will have to confirm that the software is OK. So what I want to know is. is there a way I can get my IT Infrastructure guys to create me a an "internal" certificate from the domains Certificate Authority, or do I have to go and pay for a certificate from somebody like VeriSign? Thanks

  Read the article

• Nginx https rewrite turns POST to GET

  - by x7311

  My proxy server runs on ip A and this is how people access my web service. The nginx configuration will redirect to a virtual machine on ip B. For the proxy server on IP A, I have this in my sites-available server { listen 443; ssl on; ssl_certificate nginx.pem; ssl_certificate_key nginx.key; client_max_body_size 200M; server_name localhost 127.0.0.1; server_name_in_redirect off; location / { proxy_pass http://10.10.0.59:80; proxy_redirect http://10.10.0.59:80/ /; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } server { listen 80; rewrite ^(.*) https://$http_host$1 permanent; server_name localhost 127.0.0.1; server_name_in_redirect off; location / { proxy_pass http://10.10.0.59:80; proxy_redirect http://10.10.0.59:80/ /; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } The proxy_redirect was taken from how do I get nginx to forward HTTP POST requests via rewrite? Everything that hits the public IP will hit 443 because of the rewrite. Internally, we are forwarding to 80 on the virtual machine. But when I run a python script such as the one below to test our configuration import requests data = {'username': '....', 'password': '.....'} url = 'http://IP_A/api/service/signup' res = requests.post(url, data=data, verify=False) print res print res.json print res.status_code print res.headers I am getting a 405 Method Not Allowed. In nginx we found that when it hit the internal server, the internal nginx was getting a GET request, even though in the original header we did a POST (this was shown in the Python script). So it seems like rewrite has problem. Any idea how to fix this? When I commented out the rewrite, it hits 80 for sure, and it went through. Since rewrite was able to talk to our internal server, so rewrite itself has no issue. It's just the rewrite dropped POST to GET. Thank you! (This will also be asked on Nginx forum because this is a critical blocker...)

  Read the article

• Internet connection issues after installing Windows Phone 8 SDK

  - by Mosquito

  first of all I must admit, that I'm not good in all this network stuff. I am using Windows 8 OS. On my laptop (Lenovo G570) I have installed Windows Phone 8 SDK and shortly after this I started having weird issues with internet connection. When I start my laptop, internet usually works fine, but after a few minutes it starts slowing down so much, that I'm not able to open a single page. Rebooting doesn't work, after several disabling and enabling network adapter, it usually works again for a few minutes and then again it stops. I'm sure it has something to do with Windows Phone 8 SDK, because problems started with this. With SDK there was also installed "vEthernet (Internal Ethernet Port Windows Phone Emulator Internal Switch)" network adapter. It is worth to note that problems occur mostly in my school network, not at home. Both at home and school I am using Wi-Fi connection. I hope the information given are enough to help me. Thanks in advance for any answers!

  Read the article

• Notebook display not working properly

  - by jfcfar

  I have an old Acer TM4001 notebook. If the laptop is powered-off, with the lid closed, when I power it on, it generally works. Then, without touching anything, if I reboot the computer the internal display wil not work anymore. To make it working again I need to shut down the pc, close and reopen the lid and then turn it on. If I close and reopen the lid if it is not working after power the pc on, it won't work. When the screen is working, closing and opening it has no effect (the data cable seems ok). The external monitor always works as expected: If the internal display is not detected, the external will be the main (and only) display. This is not OS-related. When the screen is not working I cannot see the POST. What could be the cause for this?

  Read the article

• Where do I find a free (open source preferably) VNC management tool?

  - by thenior

  Hello, I am trying to get remote internal setup for our business. Basically, I just want to remote desktop into any computer on the network. I don't want to use LogMein, because I only want it to be internal for security. Basically, I am looking for a way to just install VNC clients on all the machines, and on my machine have centralized manager for all the machines that are connected to it. Doesn't have to VNC - just needs to work and be free. All systems running Win 7 64bit

  Read the article

• Use 2 wireless adapters to connect to 2 WIFI networks (local and internet) simultaneously?

  - by Mouad

  On my HP Compaq 6710b there's an internal WIFI network adapter. Attached to the same laptop there's also an external USB Alfa WIFI adapter. I live near campus and can pick it's WIFI signal. The problem is that when I am connected to the Internet Wifi using the internal adapter, and then connect to the home (non-internet) Wifi network's router, I lose the connection to the internet (it stays connected, but there's no actual connection). So how can I use the two adapters to connect to both networks successfully ? The router is Belkin N150 Enhanced Router Model F6D4230-4 V1 The external adapter is: ALFA AWUS 036NHR

  Read the article

• DELL U2410 Monitor(Display Port) & Graphic card

  - by Anj

  I was looking for a 24" monitor and bought the Dell 24" inch ultra sharp monitor which has DisplayPort( new keyword for me) seems it is equivalent to HDMI. Now I would like to enhance the display capabilities for my laptop and desktop(both have VGA output as of now). Couple of questions in mind: Is there a single HD graphic card which i could use for both desktop and laptop? I understand it has to be external but if its costly then I would stick on internal graphic card for my desktop. Please recommend external if its cost effective else I would go for internal one(Budget is around $70 or Rs 4000. Is there a HD card which I could use for both HD video and 5.1 channel audio output? I generally use the computer for office work/ listening music and watching movies, not gaming.

  Read the article

• How setup federated SQL data to display limited information to a Web server in the DMZ?

  - by Pcav

  I have a SQL server behind a firewall. I need to push some limited SQL 2005 information to a Web Server in the DMZ so that I do not have to let database queries come all the way into the database server on our internal network. I want to push a small amount of dynamic data to a Web server in the DMZ and lock it down so that our hosted website does not need to come into the internal network for information; I want to put a server in the DMZ that will be the only connection allowed to the SQL database. This DMZ server will be the only server that can have any sort of connection to the back-end database so the hosting provider just pull the data from our server in the DMZ...

  Read the article

• Amazon EC2 - Reserved Private Addresses

  - by reach4thelasers

  I've got a private DNS Server running on Amazon EC2. I don't need a public IP Address because its only used for private addressing web1.xxx.internal database1.xxx.internal Problem is I had to terminate the instance recently and start a new one. This meant that the private IP address of the DNS server changed and I had to log in to each of my other 15 server one-by-one and change the DNS address to point to the new DNS server. There must be a better way to do this, if so, what is it?

  Read the article

• What are the methods of separating network spaces in a LAN?

  - by dash17291

  Please detail me the methods. My thoughts: put the servers in separate (sub)networks the servers are forced to go through the firewall but no NAT is required assign more IP addresses to the internal interface of the server choosing gateway addresses from the clients and servers IP address ranges split DNS Netfilter/{iptables, ipset} could be heavily involved, I'm talking about Linux servers. See for example: Destination NAT Onto the Same Network from internal clients Please do not explain what is NAT or DNS. This is a theoretical question, but my poor English knowledge prevent me to describe it in a fancy fashion.

  Read the article

• Zentyal Server : Setting up secure VPN Client

  - by JustShrey

  I have officially exhausted pretty much all my google-fu trying to set this up so I'm asking my question here. For the record, I am a mid level rookie who has played around with servers in his spare time but have never worked with Zentyal Server. Now, I have been able to set up the server as a gateway, with one Network card being external and the other facing the internal Network. The Internal network computers are able to access the internet without any issues. What I need to do is to setup a open-vpn client on the central server so that all Internet data goes though the secure VPN session. As far as I can see, I can't set up the vpn session through the web admin page. Could somebody point me in the right direction? How would I go about doing this? Regards Shreyas

  Read the article

• Why do I have inconsistent network issues with my laptop's wireless?

  - by Jason

  I'm having trouble with my laptop Internet connection. It's patchy at best and resets or freezes a lot. The signal strength is also random. I thought it might be a driver issue but now I don't know. Three other computers using the same wireless network run well. I've switched out wireless routers so I don't think it's the router. I thought it might be the laptop's internal wireless card but I just bought an external USB network card and I'm still having problems. Specs Lenovo T-60p Windows 7 Ultimate Edition Patches/drivers are up to date I only use one of the below at a time, disabling the other: Intel PRO/Wireless 3945ABG v. 13.3.0.137 (Internal wireless) Medialink Wireless-N USB 2.0 Adapter (USB wireless) Any ideas on what might be the problem?

  Read the article

• Volume lowers sounds automatically

  - by user328421

  the volume from my windows 7 computer lowers automatically. Regarding the several "similar questions" that have been posted to SU.com before, they have never been properly answered. Questions for reference: Windows 7 lowering volume without my consent Windows 7 lowers applications' volume automatically My communications button has already been set to "do nothing". Yet a louder sounding program still insists on lowering down other application's volumes. I fight for the equality of all programs on my PC, help me out please :(

  Read the article

• Cisco ASA Multiple Public IP

  - by KGDI

  I have a Cisco ASA5510 and articles related to ASA and mulitple Public IP says this cant be done. My question is how to best solve a scenario like this: I have 3 zones, Outside, Inside and DMZ Outside is Internet Inside is Client machines DMZ is a zone for servers related to external and internal services. My scenario is a bit more complex, but to keep things simple this will do: I want to place an Exchange server and a web server (externally reachable in the DMZ zone) The webserver uses both TCP80/443, the Exchange server uses 443 So to the problem: With the ASA only having one public IP, how would you make a DNAT to port 443 on both the internal hosts behind 1 Public IP? Usually, when i do this kind of scenario With Linux boxes i use alias Interfaces like eth0:0, eth0:1 and set 1 Public IP on each. To me this must be a pretty common scenario, any ideas on how to solve it With ASA? /KGDI

  Read the article

• subversion issue on mac os x

  - by user32942

  This exists in my httpd.conf file: <Location /svn> DAV svn SVNParentPath /Users/iirp/Sites/svn Allow from all #AuthType Basic #AuthName "Subversion repository" #AuthUserFile /Users/iirp/Sites/svn-auth-file #Require valid-user </Location> This is working file When I change this to: <Location /svn> DAV svn SVNParentPath /Users/iirp/Sites/svn #Allow from all AuthType Basic AuthName "Subversion repository" AuthUserFile /Users/iirp/Sites/svn-auth-file Require valid-user </Location> and when I access my repository through URL, it gives me the authentication screen but after that screen my svn repository is not showing up correctly. to see message that it gives to me is: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log.

  Read the article

• New 2.5" hard drive for laptop - What to compare?

  - by TFM

  I'm having trouble finding a new (bigger) hard drive for my laptop. I came across some criteria that I never thought about before, while I was checking a price comparison site. Of course, that made me more confused. First of all, I will probably go with something above 250 GB, and at least 16 MB cache. Now the confusing part: Most new drives are 7200 RPM, as opposed to good old 5400 RPM. 7200 RPM used to mean extra heat, but suddenly it's almost impossible to find a 5400 RPM in 2.5". What did I miss? Second question: Internal data transfer rate. My old drive has a rate of around 60 MB, but new drives have values like 100 MB or more (e.g. 150 MB). How important is this "internal data transfer rate"?

  Read the article

• Is LDAP typically used in conjunction with SAP?

  - by michael

  I have potential clients that all use SAP. To avoid silent push back from IT, we want to make sure we don't add extra complexity to their job if the client (our client internal to the company is not IT) wants to adopt our SaaS. One way to avoid headaches is to add support for LDAP in our SaaS (a bit of work, but nothing major) ahead of time and make sure to mention that to IT. I really know nothing about SAP. Does SAP use an internal or external LDAP server usually? Updated question: A Company relies on an Asset management product from SAP. If I wanted to provide a SaaS that shares space in their workflow, is it advisable to use the SAP product authentication service (if it exists), and if so, do they provide an API?

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >