Search Results

Search found 17710 results on 709 pages for 'portable home directories'.

Page 73/709 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

  • Controlling an amplifier power supply from Squeezebox/SqueezeCenter

    - by teabot
    I have a Squeezebox that is connected to an amplifier. I'd like the amplifier to switch on/off whenever the Squeezebox is powered on/off. I don't mind writing some plugin code to SqueezeCenter to do this but in hardware terms I am looking for off-the-shelf components. I imagine that I need some kind of Ethernet controlled power outlet. I have looked at X10 (I can't bring myself to link to their terrible site), but their product range seems extremely confused and it looks as though I'd have to use both RF and comms-over-mains to implement a computer controlled socket. Does anyone have any alternative suggestions? Note: Any components should be available and certified for use in the UK.

    Read the article

  • OSX: iTunes won't play .ogg files over shared library

    - by Decavolt
    I have an OSX 10.5 box that is sharing its iTunes library and another 10.6 box connecting to that library through iTunes. It works as expected except for ogg files. Those ogg files are visible and selectable in the shared library but will not play through the share on the client machine. If I move the ogg files to the client machine they play locally just fine. They also play locally on the host machine. They just won't play through the iTunes share. Is this a bug or some other known issue? Is there a fix, short of converting all ogg files to mp3?

    Read the article

  • Slow network file transfer (under 20KB/s) on newly built x64 Win7

    - by Mangoshake
    I am getting <20KB/s for local network file transfer. If I transfer a very small file (less than 100KB) it would start quickly then slow down to <20KB/s. all subsequently network file transfer would be slow, a reboot is needed to reset this. If I transfer a large file it would be stuck on calculating for a long time and then begin with <20KB/s immediately. This is a newly built desktop running Windows 7 x64 SP1. Realtek gigabit LAN from the motherboard (ASRock Extreme3 gen3). Problematic speed is observed on the private LAN, both through ethernet and WiFi. The Router is D-Link DIR-655. Remote Differential Compression is off. Drivers are up-to-date from ASRock's website. I have tested network file transfer to and from another Windows 7 laptop and a MacBook Pro, so I am fairly certain it is the desktop's problem. The slow speed only happens with one direction also, outbound from the desktop, regardless of whether I initiate the file transfer action from the origin or the destination. Inbound network file transfer and internet speeds are fine, so I don't think this is a hardware issue. I am getting 74.8MB/s internet upload speed from speedtest.net (http://www.speedtest.net/result/1852752479.png). Inbound network file transfer I can get around 10-15MB/s. I am hoping this community has some insight for me to troubleshoot this. I don't see anything obviously related from the Event Viewer, and beyond that I just don't know where else to look. Any suggestions are greatly appreciated, thank you in advance.

    Read the article

  • wireless network with cable modem and access point

    - by hayri
    I have a Scientific Atlanta EPC2203 cable modem and a TP-Link TL-WA500G access point. When I connect my computer directly to modem with a CAT5e cable I have internet connection on my laptop (when i type ipconfig i see my external ip there, provided by isp). So I decided to have wireless network in the flat, allowing other devices to connect as well. I bought this wireless ap (TL-WA500G) configured Wireless security stuff, and connected it to my modem. With that configuration (by default AP has static ip of 192.168.1.254) only my computer can connect to internet over wifi, but not any other device. When I set the IP of AP to Dynamic IP (DHCP) it is the same. How should I change my configuration to enable all wifi devices to connect to internet?

    Read the article

  • Shared login in a computer network?

    - by Donald
    Hi, I need to understand how a network works: Several PCs running Windows XP One server The PCs are all network connected, as well as the server. Each computer share the logins. I need to understand what happens if I take off the server. Can I still login in each PC? Is the username:passwords on the server or in each computer? My final goal is to take off the server from the network and I need to know what is the server doing. What can he be doing? Thanks.

    Read the article

  • How do you engineers keep your place clean?

    - by 280Z28
    I have a major problem keeping not only my desk, but my entire place clean. I end up spending all of my time behind the keyboard and slowly but surely it all turns to crap everywhere but between my monitors and I. It's causing some major problems IRL and I need to fix it. Question: I'm an engineer, and I eat, sleep, and breathe think like an engineer. Do you have any ideas for engineering a clean place? Note to the messy users out there: Not really interested. I've been messy for ages so I've got that covered. I'm looking for real suggestions from people who actually keep clean, preferably from some who've been in my shoes before.

    Read the article

  • How can I share a Windows 7 library with anonymous access without using a Homegroup?

    - by Triynko
    The "homegroup" feature is useless, because it requires a password, and therefore doesn't support anonymous, no-hassle access to shares from devices such as my Sony Bravia TV and non-Windows7 machines. So I turned off homegroup and reverted to the standard shared folders protocol. I'd like to share my Music "Library", so I can play files from my TV through the Surround Sound System, but there seems to be no option to share a library folder other than through a homegroup. I don't want to have to individually share the folders that belong to the library, because that would defeat the purposes of the library, which is to manage which folders are included in the library while also providing an easily accessible view of them all at once. Does anyone know how to share a Windows 7 library without that useless homegroup feature?

    Read the article

  • Windows periodically disconnects, reconnects to the network

    - by einpoklum
    My setup: I have a PC with a Gigabyte GA-MA78S2H motherboard (Realtek Gigabit wired Ethernet on-board). I have the latest drivers (at least the latest driver for the NIC. I'm connecting via an Edimax BR-6216Mg (again, wired connection). For some reason I experience short periodic disconnects and reconnects. Specifically, Skype disconnects, tries to connect, succeeds after a short while; incoming SFTP sessions get dropped; using a browser, I sometime get stuck in the DNS lookup or connection to the website and a page won't load. A couple of seconds later, a reload works. All this happens with Windows XP SP3. With Windows 7, it also happens. (When I initially wrote this question I didn't notice it.) ipconfig for my adapter: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1D-7D-E9-72-9E Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.254 DHCP Server . . . . . . . . . . . : 192.168.0.254 DNS Servers . . . . . . . . . . . : 192.117.235.235 62.219.186.7 Lease Obtained. . . . . . . . . . : Saturday, March 10, 2012 8:28:20 AM Lease Expires . . . . . . . . . . : Friday, January 26, 1906 2:00:04 AM A result of some tests a couple of the disconnects: C:\Documents and Settings\eyalroz.BAKNUNIN>nslookup google.com DNS request timed out. timeout was 2 seconds. *** Can't find server name for address 192.117.235.235: Timed out DNS request timed out. timeout was 2 seconds. *** Can't find server name for address 62.219.186.7: Timed out *** Default servers are not available Server: UnKnown Address: 192.117.235.235 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. *** Request to UnKnown timed-out C:\Documents and Settings\eyalroz.BAKNUNIN>ping 194.90.1.5 Pinging 194.90.1.5 with 32 bytes of data: Control-C ^C C:\Documents and Settings\eyalroz.BAKNUNIN>tracert -d 194.90.1.5 Tracing route to 194.90.1.5 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.0.254 2 * * 11 ms 10.168.128.1 3 14 ms 13 ms 14 ms 212.179.160.142 4 * * * Request timed out. 5 * * * Request timed out. 6 * * 47 ms 62.219.189.169 7 31 ms 27 ms 32 ms 62.219.189.150 8 15 ms 14 ms 16 ms 192.114.65.202 9 15 ms 15 ms 11 ms 212.143.10.66 10 13 ms 29 ms 31 ms 212.143.12.234 11 35 ms 15 ms 18 ms 212.143.8.72 12 22 ms 22 ms 16 ms 194.90.1.5 I usually ping 194.90.1.5 (which is not at my ISP) with 15ms response time and no losses. Things I've done/tried: [2012-03-26] I replaced the cable; I thought that made a difference, but the disconnects were back a while later, so that wasn't it. Updated the NIC driver. Tried reducing the MTU (used a utility called Dr. TCP); there was no effect. I updated my board BIOS revision (which caused all the HW to be "reinstalled" or re-identified - successfully). I installed another NIC, and tried switching to it - same effect with the on-board NIC. A while back I tried another router (although it was an Edimax model) - same problem. Connected the computer directly, with no router. Same problem. ping -t to the router (192.168.0.254) gives pongs, nothing is lost, and time is < 1 ms almost always (sometimes it says 1 or 2 ms). This is the case also during the disconnects.

    Read the article

  • Windows XP periodically disconnects, reconnects; Windows 7 doesn't

    - by einpoklum
    My setup: I have a PC with a Gigabyte GA-MA78S2H motherboard (Realtek Gigabit wired Ethernet on-board). I have the latest drivers (at least the latest driver for the NIC. I'm connecting via an Edimax BR-6216Mg (again, wired connection). For some reason I experience short periodic disconnects and reconnects. Specifically, Skype disconnects, tries to connect, succeeds after a short while; incoming SFTP sessions get dropped; using a browser, I sometime get stuck in the DNS lookup or connection to the website and a page won't load. A couple of seconds later, a reload works. All this happens with Windows XP SP3. With Windows 7, it doesn't happen. The connection is smooth (OS is sluggish though, but never mind that). Like I said, I updated the NIC driver. I tried reducing the MTU (used something called Dr. TCP), thinking maybe that would help, but it didn't. (I'm a bit but not super-knowledgeable about TCP parameters.) I'm guessing it's either a problem with the driver or some settings which are different between the two OSes. ipconfig for my adapter: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1D-7D-E9-72-9E Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.254 DHCP Server . . . . . . . . . . . : 192.168.0.254 DNS Servers . . . . . . . . . . . : 192.117.235.235 62.219.186.7 Lease Obtained. . . . . . . . . . : Saturday, March 10, 2012 8:28:20 AM Lease Expires . . . . . . . . . . : Friday, January 26, 1906 2:00:04 AM

    Read the article

  • Connecting both WAN and LAN ports to the same hub

    - by C. Lee
    For some reason I wish to connect the WAN port and the LAN port on a router to the same hub and make the hub is connected to both networks, the Internet and a private network. Below is a diagram of the network configuration I'd like to build. I tried this and it didn't work as expected. PC 1 has no problem, but PC 2 cannot connect to the Internet. When I ping 192.168.0.1 from PC 2, all packets are lost. It works well when PC 2 is connected directly to the router. What's the problem with the network configuration above?

    Read the article

  • Ubuntu: Multiple NICs, one used only for Wake-On-LAN

    - by jcwx86
    This is similar to some other questions, but I have a specific need which is not covered in the other questions. I have an Ubuntu server (11.10) with two NICs. One is built into the motherboard and the other is a PCI express card. I want to have my server connected to the internet via my NAT router and also have it able to wake from suspend using a Magic Packet (henceforth referred to as Wake-On-LAN, WOL). I can't do this with just one of the NICs because each has an issue - the built-in NIC will crash the system if it is placed under heavy load (typically downloading data), whilst the PCI express NIC will crash the system if it is used for WOL. I have spent some time investigating these individual problems, to no avail. My plan is thus: use the built-in NIC solely for WOL, and use the PCI express card for all other network communication except WOL. Since I send the WOL Magic Packet to a specific MAC address, there is no danger of hitting the wrong NIC, but there is a danger of using the built-in NIC for general network access, overloading it and crashing the system. Both NICs are wired to the same LAN with address space 192.168.0.0/24. The built-in ethernet card is set to have interface name eth1 and the PCI express card is eth0 in Ubuntu's udev persistent rules (so they stay the same upon reboot). I have been trying to set this up with the /etc/network/interfaces file. Here is where I am currently: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 auto eth1 iface eth1 inet static address 192.168.0.254 netmask 255.255.255.0 I think by not specifying a gateway for eth1, I prevent it being used for outgoing requests. I don't mind if it can be reached on 192.168.0.254 on the LAN, i.e. via SSH -- it's IP is irrelevant to WOL, which is based on MAC addresses -- I just don't want it to be used to access internet resources. My kernel routing table (from route -n) is Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 My question is this: Is this sufficient for what I want to achieve? My research has thrown up the idea of using static routing to specify that eth1 should only be used for WOL on the local network, but I'm not sure this is necessary. I have been monitoring the activity of the interfaces using iptraf and it seems like eth0 takes the vast majority of the packets, though I am not sure that this will be consistent based on my configuration. Given that if I mess up the configuration, my system will likely crash, it is important to me to have this set up correctly!

    Read the article

  • cannot commit svn with dav on ubuntu

    - by hiddenkirby
    So there are several similar questions on serverfault ... but the solution is still eluding me. I am running subversion on ubuntu 9.04 .. through apache2.2.x .... i get Commit failed (details follow): Can't make directory '/home/kirb/svn/dav/activities.d': Permission denied when i attempt to commit. It is deffinitely a permissions issue... but how to fix it is still eluding me. my repository is in /home/kirb/svn. http://serverfault.com/questions/61573/svn-commit-error says to chgrp .. but i dont seem to be able to. all the apache dav stuff seems to be working though. I can access my repository just fine through a browser. apologies if i am missing something simple here. Thanks in advance, Kirb additional edit: i am not able to sudo chgrp on the directory at all sudo chgrp -R www-data /home/kirb/svn; chmod -R g+rwx /home/kirb/svn [sudo] password for kirb: chmod: changing permissions of/home/kirb/svn': Operation not permitted chmod: changing permissions of /home/kirb/svn/format': Operation not permitted chmod: changing permissions of/home/kirb/svn/conf': Operation not permitted chmod: cannot read directory /home/kirb/svn/conf': Permission denied chmod: changing permissions of/home/kirb/svn/locks': Operation not permitted chmod: cannot read directory /home/kirb/svn/locks': Permission denied chmod: changing permissions of/home/kirb/svn/db': Operation not permitted chmod: cannot read directory /home/kirb/svn/db': Permission denied chmod: changing permissions of/home/kirb/svn/README.txt': Operation not permitted chmod: changing permissions of /home/kirb/svn/hooks': Operation not permitted chmod: cannot read directory/home/kirb/svn/hooks': Permission denied`

    Read the article

  • Is it safe to leave a broadband router running 24/7?

    - by Anirvan
    My father-in-law's ISP warned him in the strictest possible terms to physically turn off his rented Nokia Siemens C2110 PPPoE broadband router when not in use. Everyone I know leaves their broadband router on all the time, and I've never heard of any negative impacts. Is leaving a consumer broadband router running 24/7 really problematic? Is the ISP in question being ridiculously paranoid?

    Read the article

  • Wireless network relay?

    - by IPX Ares
    Is there hardware (links would be great) that can connect to the wireless internet already in my house and provide hard links to other hardware? Basically the problem is that my basement is not wired up to let me hook up my cable modem. I have some electronics that do not have wireless and need a LAN wire. Is there something I could plug in downstairs to act as a relay hub?

    Read the article

  • How can I share a Windows 7 library with anonymous access without using a Homegroup?

    - by Triynko
    The "homegroup" feature is useless, because it requires a password, and therefore doesn't support anonymous, no-hassle access to shares from devices such as my Sony Bravia TV and non-Windows7 machines. So I turned off homegroup and reverted to the standard shared folders protocol. I'd like to share my Music "Library", so I can play files from my TV through the Surround Sound System, but there seems to be no option to share a library folder other than through a homegroup. I don't want to have to individually share the folders that belong to the library, because that would defeat the purposes of the library, which is to manage which folders are included in the library while also providing an easily accessible view of them all at once. Does anyone know how to share a Windows 7 library without that useless homegroup feature?

    Read the article

  • Windows Media Center HDMI Capture Cards

    - by RSolberg
    I'm working on a new software application that utilizes windows media center to play recorded TV shows in the center of the screen. We can get this to work with standard coax or RCA input TV Tuner/Capture cards. My question is this... Are there any TV tuner / capture cards out there that allow you to use Windows Media Center with an HDMI input of some kind?

    Read the article

  • Should I upgrade my LinkSys WRT54GL firmware?

    - by Reid
    I have a LinkSys WRT54GL v1.1 which currently has stock firmware version 4.30.7. I see that version 4.30.14 is available. The router works fine now, and the release notes look uninteresting except for one line in v4.30.9: "Resolves issue with Linux kernel vulnerability". I have remote management turned off. I'm aware of the 3rd-party firmwares but the stock firmware works fine for me at the moment, so I don't have an interest in those. Is the status quo fine or should I upgrade the firmware? (It's a bit of a pain since the config has to be saved and reloaded, and obviously any mucking with firmware is risky.)

    Read the article

  • Windows 7 Homegroups not working?

    - by Jonas
    I've got a homegroup set up, and only the accounts/machines where the user and password is identical can see/share files. I thought the setting to let homegroup control the accounts would make that requirement unnecessary....am I missing something? To be clear: I can see the other machines/user accounts in my homegroup listing, but I can't see any of the files in their shared libraries.

    Read the article

  • Block P2P traffic on a Linksys router WRT54G with Tomato firmware

    - by Kami
    I'm running a small wireless network (6 to 10 users) on a Linksys WRT54G with Tomato firmware sharing an Internet connection. I don't want the users to download files with BitTorrent (mainly used) and other P2P apps. I've also found some solutions about lowering P2P traffic priority using QoS. I really need to ban P2P traffic. Does anyone know how to setup some rules to deny that kind of traffic? I've tried to setup an Access Restriction Rule: However it's not working at all.

    Read the article

  • Can I make my PC backup and then sleep on demand with WHS?

    - by Simon
    I really hate the way that WHS backs up at a particular time in the morning. First of all I don't EVER want my computer turning on when I am not there. EVER. I have a Core-i7 laptop which literally could burn the house down quite easily if it were to turn on in a bag. I also don't ever want my PC to sleep unless I tell it to. I don't have hibernation or sleep enabled and this is the only way that WHS will sleep after a backup is complete. I know that Windows 7 has the ability to disable waking up when on battery power but it doesn't seem to work on my laptop. These are the possibilities (with wake timers left as default): 'Wake this computer for backup' ON - it turns on in my bag if i forget to turn it off - and stays on when the backup is complete. 'Wake this computer for backup' OFF - it backs up in the morning, but I need to leave the machine on all night. I say 'Backup Now' and then it backs up immediately. I can turn it off when its done if I'm still awake, but then that backup appears as 'locked' in the console and not 'automatically managed'. What I'd really like to do is : Click 'Backup and Sleep' and then go to bed. It will backup immediately and then sleep the PC. This backup must be 'automatically managed' and not appear as a 'locked backup' in my console Show me a confirmation that everything was backed up successfully (or not) when I turn it on. Is there any way to achieve this?

    Read the article

  • Error while setting up Anywhere Access on Windows Server 2012 Essential (personalized domain name from Microsoft)

    - by Thomas
    I am trying to setup Anywhere Access on a Windows Server 2012 Essential Release Candidate, but keep getting this error: "The domain name was not setup for your server. Wait a few minutes and run the wizard again. An unknown error occurred. Please wait a few minutes and then try again". These are the options that I selected in the Wizard: I want to set up a new domain name Get a personalized domain name from Microsoft Entered my Windows live id and password xxxx.remotewebaccess.com And on the next page the error is displayed. I have setup my router (Linksys WRT160N) to forward all TCP traffic to the Server. UPnP is also enabled. If I hit my public (dynamic) IP (http://188.182.194.182/) I get the Windows Server 2012 homepage. Any ideas?

    Read the article

  • Crossover LAN connection between Ubuntu And Windows 7 is not working

    - by brett
    my question is closely related to: How do I connect Ubuntu 10.04 and Windows 7 with an Ethernet cable? What I am after is: Windows 7-------wireless-----\ Wifi router Ubuntu 10.04----wireless-----/ Windows 7-------wireless-----\ | cross_over_cable Wifi router | Ubuntu 10.04----wireless-----/ What I did was On Windows edit system32\drivers\etc\hosts Add the following line: 192.168.253.2 my_ubuntu_computer_name_&-wired //?not sure if this is right On Ubuntu: sudo gedit /etc/hosts Add the following line: 192.168.253.1 my_pc_computer_name&-wired //?not sure if this is right and then Ubuntu 12.04 as the host Right click on the Network Manager applet, click Edit Connections... In the Wired tab, click Auto eth0, then click Edit... In the IPv4 Settings tab, change Method: to Shared to other computers. Click Apply and enter your password when it asks you. Close everything and reboot. Plug the Ethernet cable into both computers. But, I can connect to my windows network folders from ubuntu via wifi I can't connect to my ubuntu network folders from windows via wifi(in fact this bit was working before - so my wifi connection is worse) my ubuntu Auto Ethernet seems to be on From Ubuntu eth0 Link encap:Ethernet HWaddr 00:11:2f:f3:43:8d inet addr:10.42.0.1 Bcast:10.42.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:2fff:fef3:438d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:172 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:27279 (27.2 KB) Interrupt:19 Base address:0xe400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1147 errors:0 dropped:0 overruns:0 frame:0 TX packets:1147 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:94380 (94.3 KB) TX bytes:94380 (94.3 KB) wlan0 Link encap:Ethernet HWaddr 00:03:c9:e9:6f:bf inet addr:10.1.1.7 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::203:c9ff:fee9:6fbf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13186 errors:0 dropped:0 overruns:0 frame:0 TX packets:12187 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1598882 (1.5 MB) TX bytes:1189555 (1.1 MB) From Windows: Windows IP Configuration Ethernet adapter Bluetooth Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : BoB Link-local IPv6 Address . . . . . : fe80::ecf7:c445:3725:b9c1%12 IPv4 Address. . . . . . . . . . . : 10.1.1.4 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.1.1.1 Tunnel adapter Local Area Connection* 15: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:1423:3ae3:f5fe:fefb Link-local IPv6 Address . . . . . : fe80::1423:3ae3:f5fe:fefb%23 Default Gateway . . . . . . . . . : :: Tunnel adapter isatap.BoB: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : BoB Tunnel adapter isatap.{D0C8EBA1-335D-4620-8570-6C36E8786D72}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :

    Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >