Search Results

Search found 7452 results on 299 pages for 'power loss'.

Page 73/299 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• How to solve High Load average issue in Linux systems?

  - by RoCkStUnNeRs

  The following is the different load with cpu time in different time limit . The below output has parsed from the top command. TIME LOAD US SY NICE ID WA HI SI ST 12:02:27 208.28 4.2%us 1.0%sy 0.2%ni 93.9%id 0.7%wa 0.0%hi 0.0%si 0.0%st 12:23:22 195.48 4.2%us 1.0%sy 0.2%ni 93.9%id 0.7%wa 0.0%hi 0.0%si 0.0%st 12:34:55 199.15 4.2%us 1.0%sy 0.2%ni 93.9%id 0.7%wa 0.0%hi 0.0%si 0.0%st 13:41:50 203.66 4.2%us 1.0%sy 0.2%ni 93.8%id 0.8%wa 0.0%hi 0.0%si 0.0%st 13:42:58 278.63 4.2%us 1.0%sy 0.2%ni 93.8%id 0.8%wa 0.0%hi 0.0%si 0.0%st Following is the additional Information of the system? cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4658.69 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 4 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4655.00 clflush size : 64 power management: processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 4 apicid : 2 initial apicid : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4655.00 clflush size : 64 power management: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping : 10 cpu MHz : 1992.000 cache size : 6144 KB physical id : 0 siblings : 4 core id : 3 cpu cores : 4 apicid : 3 initial apicid : 3 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca sse4_1 lahf_lm bogomips : 4654.99 clflush size : 64 power management: Memory: total used free shared buffers cached Mem: 2 1 1 0 0 0 Swap: 5 0 5 let me know why the system is getting abnormally this much high load?

  Read the article

• Visual Studio 2010 Themes, change Parameter Help background color

  - by iCe

  Hi there, Recently I installed in Visual Studio 2010 the Power Tools Extension It's working great, however I have problems with my text coloring theme (Nightfall), and the extension's Colorized Parameter feature. Since the theme text fore color is grey, when the Power Tools Extensions shows the Parameter Help tooltip using my text colors, it gets unreadable: Is there a way to change Parameter Help background color?

  Read the article

• roundoff double values in Java

  - by S.PRATHIBA

  Hi all, I have a matrix.I found the 10th power of matrix using Java.After finding the 10th power,I need to round off the double values to 3 decimal places.Please help me to round off the double values in the matrix to 3 decimal places.

  Read the article

• set backlight time

  - by mk39

  Hi, Is there any way to change backlight turn off TIME using programming(Preferred c# or vb.net other c++ can be used too)? I guess, may be it is changed using registry info or API. Manually, it is done by: Setting Backlight (Battery Power and External Power) Thank you

  Read the article

• Why isnt int pow(int base, int exponent) in the standard C++ libraries?

  - by Dan O

  I feel like I must just be unable to find it. Is there any reason that the c++ pow function does not implement the "power" function for anything except floats and doubles? I know the implementation is trivial, I just feel like I'm doing work that should be in a standard library. A robust power function (ie handles overflow in some consistent, explicit way) is not fun to write.

  Read the article

• matlab's fortran's format equivalents

  - by ldigas

  What would be matlab's equivalent of write(1,'("Speed, resistance, power",3f8.2)')(a(i),i=1,3) I've tried a = [10. 20. 200.] fprintf(unit1,'a = 3%8.1e',a) but I'm still having trouble with it (the whole matlab output formatting thing). Edit for Kenny: for the values of a as given above, it would give (in a new row): Speed, resistance, power 10.00 20.00 200.00

  Read the article

• Useful software for netbook?

  - by Moayad Mardini

  I'm looking for recommendations of good software that are particularly useful for netbooks. Software that run great on small screens and low CPU/RAM requirments. I'll start off with the following : Operating Systems: Ubuntu Netbook Remix. Easy Peasy: A fork of Ubuntu Netbook Remix that was once called UBuntu EEE. It isn't just for eeePCs though. Definitely worth a look if vanilla Netbook Remix isn't cutting it. (MarkM) Damn Small Linux (Source) Windows 7: With trimming the installation or compressing the Windows directory to fit on an 8GB SSD. (Will Eddins) nLite: A utility to install a lightweight version of Windows XP without the unnecessary components (like Media Player, Internet Explorer, Outlook Express, MSN Explorer, Messenger...). Utilites: TouchFreeze: To disable the touch pad while typing (Source) InSSIDer: Not only does it make it easier to find and keep a wireless connection, but it turns a netbook into the perfect mobile tool for troubleshooting wireless networks. (phenry) AltMove: Adds more functionality to your mouse for interacting with windows. (Rob) ASUS Font Resizer Utility and other tools by ASUS, specific to ASUS Eee PC series. Internet: Run FileZilla FTP client for a small screen : You can hide a lot of FileZilla's interface parts in the View menu, even the directory trees. Go into Settings = Interface and move the message log next to the transfer queue, if you haven't hidden them both or you want to see them. Select a theme with 16x16 icons. (Source) IDEs and Text Editors: Best lightweight IDE/Text Editor: A question on Stack Overflow that has many good suggestions of IDEs and general text editors for programmers. What’s a good linux C/C++ IDE for a low-res screen?: IDEs for Linux-powered netbooks. Online tools: Dropbox: Since the Netbook has limited disk space, you would like to use Cloud Apps like Dropbox and Ubuntu One so that you don't run out of space especially if you are on a holiday. Later when you go back to your desktop with big hard disk,you can take out the files from your dropbox repo. (Manish Sinha) Google products: like Docs, Calendar and Reader (aviraldg) Web sites and software lists: Netbookfiles.com: Netbook specific software downloads. Software Apps to Maximise your Netbook Battery Power: Netbooks are known for their portability. Not only are they small and lightweight but with their increased power efficiency, batteries can last much longer than conventional laptops. This also means you no longer have to carry a power adapter with you! Several brands emphasis the longevity of the battery as a strong selling point, and for those people who travel a lot, it sure is. Free Must-Have Netbook Apps: Finding software for netbooks can present challenges due to limited hard drive space, processor power, RAM, and screen real-estate. That doesn't mean you have to do without essential programs. The apps below cover all the bases -- entertainment, productivity, security, and communication -- without compromising on performance or usability. Best of all, they're free! Useful Netbook Software: With short battery lives and small resolution screens Netbooks, unlike many other computers on the market, could so with some specific software for their use. Now, not all of those I’ve found are specifically designed for Netbooks, but all are relevant. And they’re designed for Windows XP. The question is community wiki, so feel free to edit it. Updated, thank you all for suggestions.

  Read the article

• HP DL380 RAID5 Mistake

  - by Eddy

  I had drives fail in both logical drives on a server. When I replaced failed 146GB drive in Raid 5 array with four (4) 146GB drives. On reboot the Smart Array controller asked if I wanted to accept data loss. Guess mistake to choose yes. Can't seem to find a way to get system to repair RAID5 but it seems to want to just create a new partition. Is there anyway I can go back and get the system to restore the data from other three drives now that I said accept data loss?

  Read the article

• Ping computername - result format

  - by kamleshrao

  Hi, I am trying PING command on my Windows 7 PC after many months. While doing this, I notice the following result: Ping using computer name: D:\>ping amdwin764 Pinging AMDWIN764 [fe80::ac53:546f:a730:8bd6%11] with 32 bytes of data: Reply from fe80::ac53:546f:a730:8bd6%11: time=1ms Reply from fe80::ac53:546f:a730:8bd6%11: time=1ms Reply from fe80::ac53:546f:a730:8bd6%11: time=1ms Reply from fe80::ac53:546f:a730:8bd6%11: time=1ms Ping statistics for fe80::ac53:546f:a730:8bd6%11: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 1ms, Average = 1ms Ping using IP address: D:\>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.2: bytes=32 time=75ms TTL=128 Reply from 192.168.1.2: bytes=32 time=1ms TTL=128 Reply from 192.168.1.2: bytes=32 time=1ms TTL=128 Reply from 192.168.1.2: bytes=32 time=1ms TTL=128 Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 75ms, Average = 19ms Why am I not getting the Ping results with Numeric IP address in my first example? Thanks, Kamlesh

  Read the article

• Client A can ping server S, but client B cannot

  - by Soundar Rajan

  I moved the question to here from stackoverflow.com http://stackoverflow.com/questions/2917569/unable-to-ping-server-from-client-b-but-able-to-ping-from-client-a-please-help I am trying to configure a IIS 6.0/Windows Server 2003 web server with a ASP.net application. When I try to ping the server from client computer A I get the following: PING 74.208.192.xxx ==> Ping fails PING 74.208.192.xxx:80 ==> Ping succeeds! From client computer B, BOTH the pings fail. PING 74.208.192.xxx ==> Ping fails PING 74.208.192.xxx:80 ==> Ping fails with a message "Ping request could not find host 74.208.192.xxx:80" Both clients A and B are on the same subnet. The server is outside (a virtual server hosted by an ISP) I have an ASP.NET application in a virtual directory on the server. In IE or firefox, if I enter http://74.208.192.xxx/subdir/subdir/../Default.aspx, it works from both the clients! The server has default firewall settings but web server enabled (Port 80 is open). From client A (note the different 'reply to' address when the ping succeeds. C:\Program Files\Microsoft Visual Studio 9.0\VC>ping 74.208.192.xx Pinging 74.208.192.xx with 32 bytes of data: Request timed out. ... Request timed out. Ping statistics for 74.208.192.xx: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\Program Files\Microsoft Visual Studio 9.0\VC>ping 74.208.192.xx:80 Pinging 74.208.192.xx:80 [208.67.216.xxx] with 32 bytes of data: Reply from 208.67.216.xxx: bytes=32 time=35ms TTL=54 ... Reply from 208.67.216.xxx: bytes=32 time=33ms TTL=54 Ping statistics for 208.67.216.xxx: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 32ms, Maximum = 54ms, Average = 38ms From client B C:\Documents and Settings\user>ping 74.208.192.81 Pinging 74.208.192.81 with 32 bytes of data: Request timed out. ... Request timed out. Ping statistics for 74.208.192.81: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\Documents and Settings\user>ping 74.208.192.81:80 Ping request could not find host 74.208.192.81:80. Please check the name and try again. My main problem is I have a web service (asmx) file and the web service client program is not able to access it from client B, but able to access it from client A. I am trying to find out why and thought this ping issue may shed some light. I can ping yahoo.com both the computers.

  Read the article

• Gateway on a virtual network interface used by LXC guests

  - by linkdd

  I'm currently having some problems with configuring a gateway for a virtual network interface. Here is what I've done : I created a virtual network interface : # brctl addbr lxc0 # brctl setfd lxc0 0 # ifconfig lxc0 192.168.0.1 promisc up # route add -net default gw 192.168.0.1 lxc0 The output of ifconfig gave me what I wanted : lxc0 Link encap:Ethernet HWaddr 22:4f:e4:40:89:bb inet adr:192.168.0.1 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::88cf:d4ff:fe47:3b6b/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:623 errors:0 dropped:0 overruns:0 frame:0 TX packets:7412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:50329 (49.1 KiB) TX bytes:335738 (327.8 KiB) I configured dnsmasq to provide a DNS server (using the default : 192.168.1.1) and a DHCP server. Then, my LXC guest is configured like this : lxc.network.type=veth lxc.network.link=lxc0 lxc.network.flags=up Every thing is working perfectly, my containers have an IP (192.168.0.57 and 192.168.0.98). I can ping the host and the containers from the containers and from the host : (host)# ping -c 3 192.168.0.114 PING 192.168.0.114 (192.168.0.114) 56(84) bytes of data. 64 bytes from 192.168.0.114: icmp_req=1 ttl=64 time=0.044 ms 64 bytes from 192.168.0.114: icmp_req=2 ttl=64 time=0.038 ms 64 bytes from 192.168.0.114: icmp_req=3 ttl=64 time=0.043 ms --- 192.168.0.114 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.038/0.041/0.044/0.007 ms (guest)# ping -c 3 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.048 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.042 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.042 ms --- 192.168.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.042/0.044/0.048/0.003 ms Now, it's time to configure the host as a gateway for the network 192.168.0.0/24 : #!/bin/sh # Clear rules iptables -F iptables -t nat -F iptables -t mangle -F iptables -X iptables -A FORWARD -i lxc0 -o eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o lxc0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward The final test failed completely, ping the outside : (guest)# ping -c 3 google.fr PING google.fr (173.194.67.94) 56(84) bytes of data. From 192.168.0.1: icmp_seq=3 Redirect Host(New nexthop: wi-in-f94.1e100.net (173.194.67.94)) From 192.168.0.1 icmp_seq=1 Destination Host Unreachable From 192.168.0.1 icmp_seq=2 Destination Host Unreachable From 192.168.0.1 icmp_seq=3 Destination Host Unreachable --- google.fr ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2017ms Did I missed something ?

  Read the article

• Online backup solution

  - by Petah

  I am looking for a backup solution to backup all my data (about 3-4TB). I have look at many services out there, such as: http://www.backblaze.com/ http://www.crashplan.com/ Those services look very good, and a reasonable price. But I am worried about them because of incidents like this: http://jeffreydonenfeld.com/blog/2011/12/crashplan-online-backup-lost-my-entire-backup-archive/ I am wondering if there is any online back solution that offers a service level agreement (SLA) with compensation for data loss at a reasonable price (under $30 per month). Or is there a good solution that offers a high enough level of redundancy to mitigate the risk? Required: Offsite backup to prevent data loss in terms of fire/theft. Redundancy to protect the backup from corruption. A reasonable cost (< $30 per month). A SLA in case the service provider faults on its agreements.

  Read the article

• Can someone explain RAID-0 in plain English?

  - by Edward Tanguay

  I've heard about and read about RAID throughout the years and understand it theoretically as a way to help e.g. server PCs reduce the chance of data loss, but now I am buying a new PC which I want to be as fast as possible and have learned that having two drives can considerably increase the perceived performance of your machine. In the question Recommendations for hard drive performance boost, the author says he is going to RAID-0 two 7200 RPM drives together. What does this mean in practical terms for me with Windows 7 installed, e.g. can I buy two drives, go into the device manager and "raid-0 them together"? I am not a network administrator or a hardware guy, I'm just a developer who is going to have a computer store build me a super fast machine next week. I can read the wikipedia page on RAID but it is just way too many trees and not enough forest to help me build a faster PC: RAID-0: "Striped set without parity" or "Striping". Provides improved performance and additional storage but no redundancy or fault tolerance. Because there is no redundancy, this level is not actually a Redundant Array of Inexpensive Disks, i.e. not true RAID. However, because of the similarities to RAID (especially the need for a controller to distribute data across multiple disks), simple strip sets are normally referred to as RAID 0. Any disk failure destroys the array, which has greater consequences with more disks in the array (at a minimum, catastrophic data loss is twice as severe compared to single drives without RAID). A single disk failure destroys the entire array because when data is written to a RAID 0 drive, the data is broken into fragments. The number of fragments is dictated by the number of disks in the array. The fragments are written to their respective disks simultaneously on the same sector. This allows smaller sections of the entire chunk of data to be read off the drive in parallel, increasing bandwidth. RAID 0 does not implement error checking so any error is unrecoverable. More disks in the array means higher bandwidth, but greater risk of data loss. So in plain English, how can "RAID-0" help me build a faster Windows-7 PC that I am going to order next week?

  Read the article

• Linux bcm43224 wifi adapter slows down a couple minutes after boot

  - by Blubber

  I just installed Ubuntu on my mid 2012 MacBook Air. Everything worked out of the box, but the wifi is showing some weird behavior. When I first login it's really fast, loading google.com is near instant, and browsing in general feels at least as smooth as it did on Mac OS. However, after a couple minutes the connection slows down dramatically, sometimes it takes over 5s to load google.com, a simple reboot fixes the problem for another couple minutes. Specs: Wifi: 02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01) Driver: open-source brcmsmac driver Kernel: Linux wega 3.8.0-21-generic #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Distro: Ubuntu 13.04 (uptodate) I tried a number of things, none of which actually helped Use proprietary sta driver from broadcom Installed firmware into /lib/firmware/brcms (which, as far as I can tell from logs, does not get loaded at all) Switch router to only use 2.4 OR 5 GHz Set router to only use a OR g OR n Set router to use AES encryption only Turned off power management on the adapter Set regulatory region to the correct value (NL) on both router and laptop Disable ipv6 Nothing seems to help, the slowdown always occurs. I did notice that the latency (ping google.com) stays roughly the same (around 9ms). Below is some more information that might be of use. $ lspci -nnk | grep -iA2 net 02:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) Subsystem: Apple Inc. Device [106b:00e9] Kernel driver in use: bcma-pci-bridge $ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lsmod Module Size Used by dm_crypt 22820 1 arc4 12615 2 brcmsmac 550698 0 coretemp 13355 0 kvm_intel 132891 0 parport_pc 28152 0 kvm 443165 1 kvm_intel ppdev 17073 0 cordic 12574 1 brcmsmac brcmutil 14755 1 brcmsmac mac80211 606457 1 brcmsmac cfg80211 510937 2 brcmsmac,mac80211 bnep 18036 2 rfcomm 42641 12 joydev 17377 0 applesmc 19353 0 input_polldev 13896 1 applesmc snd_hda_codec_hdmi 36913 1 microcode 22881 0 snd_hda_codec_cirrus 23829 1 nls_iso8859_1 12713 1 uvcvideo 80847 0 btusb 22474 0 snd_hda_intel 39619 3 videobuf2_vmalloc 13056 1 uvcvideo snd_hda_codec 136453 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_cirrus bcm5974 17347 0 bluetooth 228619 22 bnep,btusb,rfcomm snd_hwdep 13602 1 snd_hda_codec lpc_ich 17061 0 videobuf2_memops 13202 1 videobuf2_vmalloc videobuf2_core 40513 1 uvcvideo videodev 129260 2 uvcvideo,videobuf2_core bcma 41051 1 brcmsmac snd_pcm 97451 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30180 1 snd_seq_midi snd_seq 61554 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29425 2 snd_pcm,snd_seq snd 68876 16 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_hda_codec_cirrus mei 41158 0 soundcore 12680 1 snd apple_bl 13673 0 mac_hid 13205 0 lp 17759 0 parport 46345 3 lp,ppdev,parport_pc usb_storage 57204 0 hid_apple 13237 0 hid_generic 12540 0 ghash_clmulni_intel 13259 0 aesni_intel 55399 399 aes_x86_64 17255 1 aesni_intel xts 12885 1 aesni_intel lrw 13257 1 aesni_intel gf128mul 14951 2 lrw,xts ablk_helper 13597 1 aesni_intel cryptd 20373 4 ghash_clmulni_intel,aesni_intel,ablk_helper i915 600351 3 ahci 25731 3 libahci 31364 1 ahci video 19390 1 i915 i2c_algo_bit 13413 1 i915 drm_kms_helper 49394 1 i915 usbhid 47074 0 drm 286313 4 i915,drm_kms_helper hid 101002 3 hid_generic,usbhid,hid_apple $ dmesg | egrep 'b43|bcma|brcm|[F]irm' [ 0.055025] [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled [ 0.152336] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 2.187681] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-99] only partially covers this bridge [ 12.553600] bcma-pci-bridge 0000:02:00.0: enabling device (0000 -> 0002) [ 12.553657] bcma: bus0: Found chip with id 0xA8D8, rev 0x01 and package 0x08 [ 12.553688] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0) [ 12.553715] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0) [ 12.553764] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0) [ 12.605777] bcma: bus0: Bus registered [ 12.852925] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17 [ 13.085176] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 13.085186] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement) [ 20.862617] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated [ 20.862622] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 20.862625] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 20.897957] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) $ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"wlan" Mode:Managed Frequency:5.22 GHz Access Point: E0:46:9A:4E:63:9A Bit Rate=65 Mb/s Tx-Power=17 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=63/70 Signal level=-47 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:13 Invalid misc:56 Missed beacon:0

  Read the article

• unable to sniff traffic despite network interface being in monitor or promiscuous mode

  - by user65126

  I'm trying to sniff out my network's wireless traffic but am having issues. I'm able to put the card in monitor mode, but am unable to see any traffic except broadcasts, multicasts and probe/beacon frames. I have two network interfaces on this laptop. One is connected normally to 'linksys' and the other is in monitor mode. The interface in monitor mode is on the right channel. I'm not associated with the access point because, as I understand, I don't need to if using monitor mode (vs promiscuous). When I try to ping the router ip, I'm not seeing that traffic show up in wireshark. Here's my ifconfig settings: daniel@seasonBlack:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1f:29:9e:b2:89 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:112 errors:0 dropped:0 overruns:0 frame:0 TX packets:112 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8518 (8.5 KB) TX bytes:8518 (8.5 KB) wlan0 Link encap:Ethernet HWaddr 00:21:00:34:f7:f4 inet addr:192.168.1.116 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::221:ff:fe34:f7f4/64 Scope:Link UP BROADCAST RUNNING MTU:1500 Metric:1 RX packets:9758 errors:0 dropped:0 overruns:0 frame:0 TX packets:4869 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3291516 (3.2 MB) TX bytes:677386 (677.3 KB) wlan1 Link encap:UNSPEC HWaddr 00-02-72-7B-92-53-33-34-00-00-00-00-00-00-00-00 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:1500 Metric:1 RX packets:112754 errors:0 dropped:0 overruns:0 frame:0 TX packets:101 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:18569124 (18.5 MB) TX bytes:12874 (12.8 KB) wmaster0 Link encap:UNSPEC HWaddr 00-21-00-34-F7-F4-00-00-00-00-00-00-00-00-00-00 UP RUNNING MTU:0 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wmaster1 Link encap:UNSPEC HWaddr 00-02-72-7B-92-53-00-00-00-00-00-00-00-00-00-00 UP RUNNING MTU:0 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Here's my iwconfig settings: daniel@seasonBlack:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:"linksys" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:F8:D6:17:34 Bit Rate=54 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=68/70 Signal level=-42 dBm Noise level=-69 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 wmaster1 no wireless extensions. wlan1 IEEE 802.11bg Mode:Monitor Frequency:2.437 GHz Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Here's how I know I'm on the right channel: daniel@seasonBlack:~$ iwlist channel lo no frequency information. eth0 no frequency information. wmaster0 no frequency information. wlan0 11 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Current Frequency=2.437 GHz (Channel 6) wmaster1 no frequency information. wlan1 11 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Current Frequency=2.437 GHz (Channel 6)

  Read the article

• RHEL 6.x on Rackspace Cloud and Dedicated hardware experiencing Redis Timeouts

  - by zhallett

  I just recently set up a mixture of RHEL 6.1 Rackspace cloud hosts and RHEL 6.2 dedicated hosts using Rackconnect. I am experiencing intermittent Redis timeouts from within our Rails 3.2.8 app with Redis 2.4.16 running on the RHEL 6.2 dedicated hosts. There is no network latency or packet loss. Also there are no errors on any interfaces on our cloud or dedicated servers or on the managed firewall from Rackspace. When Redis timesout, there is nothing logged within redis even though it is set up to do debug logging. The only error we receive is from Airbrake saying there was a Redis timeout. Network topology: RHEL 6.1 cloud hosts <--> Alert logic IDS <--> Cisco ASA 5510 <--> RHEL 6.2 dedicated hosts (web nodes) (two way NAT) (db hosts running redis) Ping from db host to web host: 64 bytes from 10.181.230.180: icmp_seq=998 ttl=64 time=0.520 ms 64 bytes from 10.181.230.180: icmp_seq=999 ttl=64 time=0.579 ms 64 bytes from 10.181.230.180: icmp_seq=1000 ttl=64 time=0.482 ms --- web1.xxxxxx.com ping statistics --- 1000 packets transmitted, 1000 received, 0% packet loss, time 999007ms rtt min/avg/max/mdev = 0.359/0.535/5.684/0.200 ms Ping from web host to db host: 64 bytes from 192.168.100.26: icmp_seq=998 ttl=64 time=0.544 ms 64 bytes from 192.168.100.26: icmp_seq=999 ttl=64 time=0.452 ms 64 bytes from 192.168.100.26: icmp_seq=1000 ttl=64 time=0.529 ms --- data1.xxxxxx.com ping statistics --- 1000 packets transmitted, 1000 received, 0% packet loss, time 999017ms rtt min/avg/max/mdev = 0.358/0.499/6.120/0.201 ms Redis config: daemonize yes pidfile /var/run/redis/6379/redis_6379.pid port 6379 timeout 0 loglevel debug logfile /var/lib/redis/log syslog-enabled yes syslog-ident redis-6379 syslog-facility local0 databases 16 save 900 1 save 300 10 save 60 10000 rdbcompression yes dbfilename dump-6379.rdb dir /var/lib/redis maxclients 10000 maxmemory-policy volatile-lru maxmemory-samples 3 appendfilename appendonly-6379.aof appendfsync everysec no-appendfsync-on-rewrite no auto-aof-rewrite-percentage 100 auto-aof-rewrite-min-size 64mb slowlog-log-slower-than 10000 slowlog-max-len 1024 vm-enabled no vm-swap-file /tmp/redis.swap vm-max-memory 0 vm-page-size 32 vm-pages 134217728 vm-max-threads 4 hash-max-zipmap-entries 512 hash-max-zipmap-value 64 list-max-ziplist-entries 512 list-max-ziplist-value 64 set-max-intset-entries 512 zset-max-ziplist-entries 128 zset-max-ziplist-value 64 activerehashing yes Redis-cli info: redis-cli info redis_version:2.4.16 redis_git_sha1:00000000 redis_git_dirty:0 arch_bits:64 multiplexing_api:epoll gcc_version:4.4.6 process_id:4174 uptime_in_seconds:79346 uptime_in_days:0 lru_clock:1064644 used_cpu_sys:13.08 used_cpu_user:19.81 used_cpu_sys_children:1.56 used_cpu_user_children:7.69 connected_clients:167 connected_slaves:0 client_longest_output_list:0 client_biggest_input_buf:0 blocked_clients:6 used_memory:15060312 used_memory_human:14.36M used_memory_rss:22061056 used_memory_peak:15265928 used_memory_peak_human:14.56M mem_fragmentation_ratio:1.46 mem_allocator:jemalloc-3.0.0 loading:0 aof_enabled:0 changes_since_last_save:166 bgsave_in_progress:0 last_save_time:1352823542 bgrewriteaof_in_progress:0 total_connections_received:286 total_commands_processed:507254 expired_keys:0 evicted_keys:0 keyspace_hits:1509 keyspace_misses:65167 pubsub_channels:0 pubsub_patterns:0 latest_fork_usec:690 vm_enabled:0 role:master db0:keys=6,expires=0 edit 1: add redis-cli info output

  Read the article

• Stop RAID 5 from Initializing

  - by Antz

  Hi, I am trying to follow Ictinike's guide on Recovering Intel RAID "Non-Member Disk" Error found here, Ictinike's RAID recovery Guide I have recreated my RAID array as per the instructions. However my RAID array status is then automatically set to: INITIALIZE When I boot back into my Windows XP desktop, the Intel Matrix Storage Utility begins to "Initialize" my drives. This is a long slow process that will take about 20 hours. I suspect all my data will be lost. I have gone back into my bios and disabled my RAID controller to prevent any further initialization and data loss. I have read that initialization will cause data loss. I've also read somewhere that it won't. I am not so confident in the latter. Is there anyway to stop this initialization process so I can continue to follow the steps in the recovery guide? Some system specs: ABIT IP35 Pro Motherboard ICH9R on board RAID controller

  Read the article

• The ping response time doesn't reflect the real network response time

  - by yangchenyun

  I encountered a weird problem that the response time returned by ping is almost fixed at 98ms. Either I ping the gateway, or I ping a local host or a internet host. The response time is always around 98ms although the actual delay is obvious. However, the reverse ping (from a local machine to this host) works properly. The following is my route table and the result: route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 100 0 0 eth1 60.194.136.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 # ping the gateway ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_req=1 ttl=64 time=98.7 ms 64 bytes from 192.168.1.1: icmp_req=2 ttl=64 time=97.0 ms 64 bytes from 192.168.1.1: icmp_req=3 ttl=64 time=96.0 ms 64 bytes from 192.168.1.1: icmp_req=4 ttl=64 time=94.9 ms 64 bytes from 192.168.1.1: icmp_req=5 ttl=64 time=94.0 ms ^C --- 192.168.1.1 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 94.030/96.149/98.744/1.673 ms #ping a local machine ping 192.168.1.88 PING 192.168.1.88 (192.168.1.88) 56(84) bytes of data. 64 bytes from 192.168.1.88: icmp_req=1 ttl=64 time=98.7 ms 64 bytes from 192.168.1.88: icmp_req=2 ttl=64 time=96.9 ms 64 bytes from 192.168.1.88: icmp_req=3 ttl=64 time=96.0 ms 64 bytes from 192.168.1.88: icmp_req=4 ttl=64 time=95.0 ms ^C --- 192.168.1.88 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 95.003/96.696/98.786/1.428 ms #ping a internet host ping google.com PING google.com (74.125.128.139) 56(84) bytes of data. 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=1 ttl=42 time=99.8 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=2 ttl=42 time=99.9 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=3 ttl=42 time=99.9 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=4 ttl=42 time=99.9 ms ^C64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=5 ttl=42 time=99.9 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 32799ms rtt min/avg/max/mdev = 99.862/99.925/99.944/0.284 ms I am running iperf to test the bandwidth, the rate is quite low for a LAN connection. iperf -c 192.168.1.87 -t 50 -i 10 -f M ------------------------------------------------------------ Client connecting to 192.168.1.87, TCP port 5001 TCP window size: 0.06 MByte (default) ------------------------------------------------------------ [ 4] local 192.168.1.139 port 54697 connected with 192.168.1.87 port 5001 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 6.12 MBytes 0.61 MBytes/sec [ 4] 10.0-20.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 20.0-30.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 30.0-40.0 sec 6.25 MBytes 0.62 MBytes/sec [ 4] 40.0-50.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 0.0-50.1 sec 31.6 MBytes 0.63 MBytes/sec

  Read the article

• My computer freezes irregurarly

  - by Manhim

  My computer started to freeze at irregular times for 3 weeks now. What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 50-60. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) My current to-try list Change the thermal paste on my CPU. Change my graphic card with a temporary one and stress the computer. Change my power supply. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

  Read the article

• Email from my new vps is marked as spam

  - by Chriswede

  I got a new vps from x10vps (x10hosting) and set up the domain via cloudflare. This is what the email looks like: Delivered-To: [email protected] Received: by 10.64.19.240 with SMTP id i16csp357708iee; Tue, 9 Oct 2012 01:29:48 -0700 (PDT) Received: by 10.50.57.130 with SMTP id i2mr908846igq.56.1349771387599; Tue, 09 Oct 2012 01:29:47 -0700 (PDT) Return-Path: <[email protected]> Received: from power.SOURCEAPE.COM ([198.91.90.116]) by mx.google.com with ESMTPS id v8si25630942ica.46.2012.10.09.01.29.46 (version=TLSv1/SSLv3 cipher=OTHER); Tue, 09 Oct 2012 01:29:47 -0700 (PDT) Received-SPF: temperror (google.com: error in processing during lookup of [email protected]: DNS timeout) client-ip=198.91.90.116; Authentication-Results: mx.google.com; spf=temperror (google.com: error in processing during lookup of [email protected]: DNS timeout) [email protected] Received: from nk11p03mm-asmtp010.mac.com ([17.158.232.169]:54276) by power.SOURCEAPE.COM with esmtp (Exim 4.80) (envelope-from <[email protected]>) id 1TLVBD-0004Ig-1Y for [email protected]; Tue, 09 Oct 2012 12:28:43 +0400 I then tried to enable SPF and DKIM and got following massage In order to ensure that SPF or DKIM takes effect, you must confirm that this server is an authoritative nameserver for chvw.de. If you need help, contact your hosting provider. Status: Enabled Warning: cPanel is unable to verify that this server is an authoritative nameserver for chvw.de. [?] and the email header now looks like this: Delivered-To: [email protected] Received: by 10.50.183.227 with SMTP id ep3csp14506igc; Tue, 9 Oct 2012 01:55:23 -0700 (PDT) Received: by 10.50.40.133 with SMTP id x5mr992934igk.32.1349772923717; Tue, 09 Oct 2012 01:55:23 -0700 (PDT) Return-Path: <[email protected]> Received: from power.SOURCEAPE.COM ([198.91.90.116]) by mx.google.com with ESMTPS id ng8si25688859icb.42.2012.10.09.01.55.23 (version=TLSv1/SSLv3 cipher=OTHER); Tue, 09 Oct 2012 01:55:23 -0700 (PDT) Received-SPF: temperror (google.com: error in processing during lookup of [email protected]: DNS timeout) client-ip=198.91.90.116; Authentication-Results: mx.google.com; spf=temperror (google.com: error in processing during lookup of [email protected]: DNS timeout) [email protected]; dkim=neutral (bad format) [email protected] DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=chvw.de; s=default; h=Message-ID:Subject:To:From:Date:Content-Transfer-Encoding:Content-Type:MIME-Version; bh=iugsx3Lx0KnqjR7dj3wyQHnJ9pe/z3ntYEVk80k8rx4=; b=IrYsCtHdoPubXVOvLqxd7sLE/TyQTS5P3OrEg5SSUSKnQQcQ/fWWyBrmsrgkFSsw6jCmmRWMDR09vH5bQRpFPMA57B7pf8QRKhwXOWFBV+GnVUqICsfRjnNPvhx/lNp5; Received: from localhost ([127.0.0.1]:46539 helo=direct.chvw.de) by power.SOURCEAPE.COM with esmtpa (Exim 4.80) (envelope-from <[email protected]>) id 1TLVb0-0004dZ-Kd for [email protected]; Tue, 09 Oct 2012 12:55:22 +0400

  Read the article

• Network? or router? problem

  - by Robert H Mercer

  I have two computers networked through a Netgear WG914 router which is connected to an Ipstar satellite modem via the RG47 LAN connector. The main computer is running Windows 7 Pro 64bit and the secondary computer is running Windows 7 Home Edition 32bit. On occasion there is a loss of internet connection usually on the main computer, often followed by a loss on the secondary comuter. Not, however, always the case. Windows troubleshooter, naturally, is about as much use as a politician in government.......NONE. There appears to be no problem with the ISP bad as it is and often the connection will be remade without any help from me. The difference in the OS's is not of any relevance since I had this problem before I changed over to Windows 7. Not being a nerd when it comes to networking I wonder if anyone has any constructive suggestions.

  Read the article

• Is the sql backend right choice for LDAP?

  - by skomak

  Hi, I have felt some troubles with LDAP dif database after unexpected system reboots. This databse was only read so it is confused why database have had errors. So im searching for replacement of this database. I think SQL would be more reliable. What do you think, is it? I need to know how much performance loss i'll meet then. How many more IOPS(I/O per second) in percentage I loss too. Thanks in advance, skomak

  Read the article

• Why "scope link" ipv6 address can be pinged via interfaces which they are not active on

  - by olagu

  [root@2_01 ~]# /sbin/ip -6 addr show pubeth0 inet6 2001:1::6/64 scope global inet6 2001:1::1/64 scope global inet6 fe80::20c:29ff:fe69:f9e8/64 scope link [root@v2_01 ~]# /sbin/ip -6 addr show pubeth1 inet6 fe80::20c:29ff:fe69:f906/64 scope link [root@2_01 ~]# ping6 fe80::20c:29ff:fe69:f9e8%pubeth1 PING fe80::20c:29ff:fe69:f9e8%pubeth1(fe80::20c:29ff:fe69:f9e8) 56 data bytes 64 bytes from fe80::20c:29ff:fe69:f9e8: icmp_seq=1 ttl=64 time=0.259 ms --- fe80::20c:29ff:fe69:f9e8%pubeth1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 286ms rtt min/avg/max/mdev = 0.259/0.259/0.259/0.000 ms [root@2_01 ~]# ping6 fe80::20c:29ff:fe69:f9e8%pubeth0 PING fe80::20c:29ff:fe69:f9e8%pubeth0(fe80::20c:29ff:fe69:f9e8) 56 data bytes 64 bytes from fe80::20c:29ff:fe69:f9e8: icmp_seq=1 ttl=64 time=0.057 ms --- fe80::20c:29ff:fe69:f9e8%pubeth0 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 390ms rtt min/avg/max/mdev = 0.057/0.057/0.057/0.000 ms Why can I ping6 "fe80::20c:29ff:fe69:f9e8" via pubeth1?

  Read the article

• connection prob

  - by user56944

  Hey guys I use Clear internet ie wireless to get my connection. I play a game online Eve Online which has had on and off CTD(crash to desktop) due to the connection timing out. Usually I have trouble only late at night after work but today I had no connection at 4 pm. They ran a trace route and Im using Ping plotter to do a trace in real time. I have 100% packet loss at hop 2 and Im getting varible loss at hop 6 at ae-72-70.ebr2.Dallas1.Level3.net Also had windows send a dump to Microsoft mentioning the eve file has a problem requiring it to close. Any thoughts ? TIA!

  Read the article

• Remove a Digital Camera’s IR Filter for IR Photography on the Cheap

  - by Jason Fitzpatrick

  Whether you have a DSLR or a point-and-shoot, this simple hack allows you to shoot awesome IR photographs without the expense of a high-quality IR filter (or the accompanying loss of light that comes with using it). How does it work? You’ll need to take apart your camera and remove a single fragile layer of IR blocking glass from the CCD inside the camera body. After doing so, you’ll have a camera that sees infrared light by default, no special add-on filters necessary. Because it sees the IR light without the filters you’ll also skip out on the light loss that occurs with the addition of the add-on IR filter. The downside? You’re altering the camera in permanent and warranty-voiding way. This is most definitely not a hack for your brand new $2,000 DSLR, but it is a really fun hack to try out on an old point and shoot camera or your circa-2004 depreciated DSLR. Hit up the link below to see the process performed on an old Canon point and shoot–we’d strongly recommend searching for a break down guide for your specific camera model before attempting the trick on your own gear. Are You Brave Enough to IR-ize Your Camera [DIY Photography] HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows? Java is Insecure and Awful, It’s Time to Disable It, and Here’s How

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >