Search Results

Search found 72456 results on 2899 pages for 'work experience'.

Page 73/2899 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• Can't bring NAT to work

  - by user31738

  Hello, I bought a D-link DIR-300 wireless router and i can't bring NAT to work, i have an ssh and http service i need to forward to the internet. My connection is as follows: I have an ADSL connection, i'm using a ADSL ethernet modem connected and working, it doesnt let me put it on bridge mode. I have my router connected to my adsl modem through ethernet, it gets its ip through DHCP (and i'ts always the same) I have a desktop computer running linux with apache and openssh configured and working, it has fixed ip. I configured the NAT in the modem forwarding port 22 from the router ip to the internet. In the router i setup NAT forwarding port 22 from the desktop computer fixed ip to out there. This setup already worked with a fonera i had before, can anyone help me with this or tell me what kind of tests do i need to do? How can i test if the router is forwarding ports correctly before the modem?

  Read the article

• Having trouble getting startup scripts to work in Server 2003

  - by Az

  Thanks for taking the time to read this. I am having trouble getting my startup scripts to run correctly on the domain I am administering. Before anyone gets upset and says "go read xxx article from microsoft",... I have. I am simply missing something or not understanding it properly. I understand how to assign the script, what I am curious about is where exactly it should be placed in the Windows folder structure. I have been able to get them to work by creating a share folder called "scripts" and pointing to that exact unc pathname IE \servername\scripts\xxx.bat. However, I would like to do it properly, would someone please tell me where they should be placed in Win2003 server, and what the path name should be when assigning a group policy to do something that applies to computer specific properties? Your assistance is very much appreciated by a junior admin trying to learn some new tricks!

  Read the article

• Wireless DHCP doesn't work until wired Ethernet plugged in

  - by MT_Head

  A client of mine has an Asus R1F tablet running Windows XP Tablet SP3. It has an Intel 3945ABG wireless card; wired Ethernet is a Realtek something-or-other. In the past few days, it's developed an odd problem: WiFi authenticates, but can't get an address via DHCP. plug in wired Ethernet - both interfaces get good addresses unplug cable, WiFi continues to work until shutdown. Next morning, repeat process. I've tried: turning WiFi off/on (there's a slider switch) disabling/re-enabling via Device Mangler uninstalling and reinstalling the driver for the 3945ABG... changing from Intel Pro/SET to Windows Wireless Zero Config (and back) restarting the router changing the static DHCP assignments at the router upgrading the router firmware, just on general principles The router/access point is pfSense 1.2.3RC1 (was 1.2.2); wireless card is Atheros-based. None of the 12 other users (5 with tablets) are having problems.

  Read the article

• esxi 5.1 - copy paste host config doesn't work?

  - by w--

  I followed these instructions for esxi 5.1 to enable copy paste from the host config. (search for "To enable this option for all the virtual machines in the ESX/ESXi host:") http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1026437 But copy and paste doesn't work for new VMs or existing VMs. Did I do something wrong somewhere? I've rebooted VMs and even rebooted host. I can confirm that if I do a per VM configuration, it works. Just not a central host config. Here is a screenshot of my /etc/vmware/config file

  Read the article

• DNS Resolution doesn't work after uninstalling Cisco VPN & Deterministic Network Enhancer in Win 7

  - by Craig M

  I just upgraded my home PC to Windows 7 Ultimate 32 bit. After trying various methods to get the Cisco VPN client to work, I gave up and decided to just run it in XP mode. The last steps I tried were in this article ( http://social.technet.microsoft.com/Forums/en-US/w7itproappcompat/thread/d880dfe5-7f44-4955-8620-2a9355d8ea8b/ ) After that, I uninstalled the Cisco client and rebooted. I uninstalled the Deterministic Network Enhancer and rebooted again. Both uninstalled successfully, but now I'm not able to resolve any DNS. The only way I can resolve DNS is to reinstall the DNE, reboot, and uninstall the DNE. Then I am able to resolve DNS lookups until I reboot again. Once it's rebooted, no more DNS. Any ideas?

  Read the article

• How to make HOME or END keys work in mc running on OS X (ssh)

  - by Sorin Sbarnea

  I installed MacPorts on OS X 10.5 and I found out that when I connect to the computer using SSH and use mc - Midnight Commander - the HOME and END keys do not work. I have to mention that I'm using putty and I am able to use the keyboard very well on Linux machines like Fedora, Ubuntu,... Here is putty keyboard configuration (a configuration I found to be optimal over time): Backspace key: 127 Home/End keys: Standard Function keys: Xterm R6 Cursor keys: Normal Numpad: normal Terminal type string: xterm-color I'm looking for a command line solution/script that does these changes, this make much easier to create a prepare OS script for configuring a new OS.

  Read the article

• Virtualbox Ubuntu 10.04 on Windows 7: networking won't work

  - by Herbert Roitblat

  I have a virtualbox image that I created using libvirt from Ubuntu 10.04. It assigns a fixed IP address. I can start it up on my Windows 7 VirtualBox, but I cannot get networking to work. My colleague loaded the same image onto his Windows 7 and networking worked as a bridged connection. Therefore, I know that the image is good, it must be something about my Windows 7 installation. Any thoughts on where to look to get networking running in my virtual machine? Thanks, Herb

  Read the article

• Checking whether product key will work with SBS 2003

  - by Rob Nicholson

  We've recently absorbed a small company who had a Dell PowerEdge server running SBS 2003. For some reason, the hard disks have been wiped. We have the product key though from the sticker on the side of the case but not the installation media: Win SBS Std 2003 1-2 CPU 5-CAL OEM software We do have a Dell labelled set of four CDs labelled SBS 2003 in our store and I've built a VM from this media but it doesn't prompt for the product key during install. Is there any way to ascertain whether this media will work with this product key without going through activation? I know one can activate several times but would prefer to check we've got the right media before doing this. Thanks, Rob.

  Read the article

• zsh completion will not work in emacs shell

  - by benhsu

  I'm learning about the more powerful tab-completion and expansion capabilities of zsh, and they don't seem to work when I run zsh under emacs with M-x shell: cat $PATH<TAB> expands the tab variable in Terminal, but in shell-mode it just beeps. I poked around the emacs environment and here's what I found: TAB (translated from ) runs the command completion-at-point, which is an interactive compiled Lisp function in `minibuffer.el'. It is bound to TAB, . (completion-at-point) Perform completion on the text around point. The completion method is determined by `completion-at-point-functions'. completion-at-point-functions is a variable defined in `minibuffer.el'. Its value is (tags-completion-at-point-function) So I'm surmising I need to add a function to completion-at-point-functions, but which one?

  Read the article

• Why my AD domain doesn't work on my laptop

  - by Frederick Marcoux

  I have installed Windows Server 2008 R2 on a virtual machine with a bridged network card and installed Active Directory. I configured it and when I try to connect my laptop to the domain name, in this case, creationsmicroweb.ca (doesn't exist, don't try, for local only), I can't get connected. My laptop just doesn't see it. I don't know why! There's a resume of my config: Domain Name: creationsmicroweb.ca Forest: new, principal domain controller IP: Fixed (192.168.1.100) DNS Name: none (just for local, I ignored them) NETBIOS name: MICROWEB If someone as found why, please help me! This is for my business that I'm starting and I can't find why it doesn't work!

  Read the article

• Exchange ActiveSync does not work for one user

  - by jshin47

  One particular user in our system is unable to connect to Exchange ActiveSync via her iPhone. When I try to connect using my own credentials on her iPhone it works (everything begins syncing), but when I input her credentials, the Settings app verifies the credentials are correct but nothing syncs. For example, if I open Mail, no items are shown. When I attempt to force a sync, it says "Cannot connect to server." In Exchange 2010 Management Console the user is no different than the others. Exchange ActiveSync is set as "Enable" in Mailbox Features. EDIT: Alternatively, if there is some easy way to create a new useraccount/mailbox and copy all of the contents of the old one over, I bet it would work, and that would be fine as well. She is a Mac user so we do not have to worry about her Active Directory account.

  Read the article

• Why didn't cable select work?

  - by jldugger

  I got roped into doing tech support for a friend of the family. Obviously I'd already failed to hide my powers, ala Penny Arcade. Anyways, the guy bought a DVD burner OEM from Microcenter, and asked me to install it. So I stopped by before and thought I'd be slick and use Cable Select on the jumpers. I didn't get a chance to test it before it I had to leave, and it seems that this didn't work. I came back this week to investigate, and he explains he's confused how none of the software he downloaded was able to burn. So on a whim I switch it to explicit master / slave, and it starts working fine. Whoops. Well, at least it's not the extra crap he found and downloaded for free from the internet. Why doesn't setting both jumpers to Cable Select solve this?

  Read the article

• SSH command from PHP script - nothing, yet work at cmd line

  - by waxical

  I'm working on an EC2 box and trying to SSH command another box. The command works in command-line, even php -a interactive. However it does not work when running as apache. Example cmd:- system('ssh -i /home/me/keys/key.pem [email protected] "ls"'); I've tried adding apache to wheel group, and gshadow on both boxes. I've also just tried chowning the pem file to apache. Nothing. Yet the command response fine in the two other use cases outlines. What's going on here? Anyone know?

  Read the article

• How does IPv4 Subnetting Work?

  - by Kyle Brandt

  This is a Canonical Question about IPv4 Subnets How does Subnetting Work, and How do you do it by hand or in your head? Can someone explain both conceptually and with several examples? Server Fault gets lots of subnetting homework questions, so we could use an answer to point them to on Server Fault itself. What is classless routing and why is class-based routing obsolete? If I have a network, how do I figure out how to split it up? If I am given a netmask, how do I know what the network Range is for it? Sometimes there is a slash followed by a number, what is that number? Sometimes there is a subnet mask, but also a wildcard mask, they seem like the same thing but they are different? Someone mentioned something about knowing binary for this? What is NAT (Network Address Translation).

  Read the article

• PC won't boot / USB and PS2 keyboards don't work

  - by Truncheon

  My brother's PC has stopped working. He now cannot boot into windows, and he can't access BIOS by pressing the DEL key as no keyboards work. He has tried 4 different keyboards, one of which is PS/2. He tried the USB keyboards on all the USB ports. I don't know why the BIOS would show the message "Floppy disks fail (40)", as there is no floppy disk drive in the PC. He has upgraded from XP to Vista (yes that's right, upgraded keeping the XP drivers, eyes roll). A BSOD occurred in Vista while he was browsing files. What steps should be taken to troubleshoot the problem?

  Read the article

• Word 2010 & Outlook 2007 - HTML Mail Merge Doesn't Work, Plain Text and Attachments do

  - by Prejay

  Hopefully someone has an answer or fix for this. When using Outlook 2007 & Word 2007 or Word 2010 & Outlook 2010, Mail merging Works fine. However there are some systems that have Word 2010 and Outlook 2007 installed. In these cases, Mail Merging to HTML Emails doesn't do anything. If i choose to Mail Merge to Plain text emails or attachments, these go through Outlook. Only HTML Email doesn't work. Now, something like Mapi Labs Mail Merge toolkit is abole to get around this, but I was wondering if there was any statement/solution on cross version support for HTML Mail Merging from Microsoft.

  Read the article

• How does azure memory usage work?

  - by Jed Grant

  I have a windows azure website. In the dashboard it shows me that I have used 1.51 GB of the 2GB available per hour. I keep increasing the number of instances available in the shared node so the site doesn't shut down. After each hour finishes, the memory usage still shows 1.51 GB used. I assume this would start at ZERO and then be used as time goes on, but that doesn't appear to be the case. How does server memory work? What are some reasons my application using this much memory? (I use no output caching and generally have just built off of the basic MVC templates provided in visual studio.) What other considerations should I be making to get the amount of memory needed to decrease?

  Read the article

• Creepy MySQL error during hard work

  - by Kiewic

  Hi, I have a MySQL database installed on a OpenSuse 11.1 server (it is a Bitnami image). The database works fine, it can stay many days without any error, but when MySQL receives a huge amount of transactions, it dies immediately. The next screen shows the error: Moreover, I don't know how to restart MySQL. I have tried this: /opt/bitnami/mysql/bin/mysqld start But it doesn't work, that gives me the next output: 110209 17:09:01 [ERROR] Fatal error: Please read "Security" section of the manual to find out how to run mysqld as root! 110209 17:09:01 [ERROR] Aborting 110209 17:09:01 [Note] /opt/bitnami/mysql/bin/mysqld.bin: Shutdown complete It doesn't matter which kind of statements are executing, if they are a huge amount, MySQL dies. The MySQL server version is 5.1.30 What can be causing these sudden failures?

  Read the article

• Speakers will not work after I use USB Headset

  - by Josh K

  I am trying to configure my SteelSeries Siberia V2 Frost USB Headset to work with my 2.0 speakers using a jack. My goal is to find a easy way (no restart) to switch playback from my headset and my speakers and vice-versa. If i plug my headset in and make it the default device then restart my application/web page then the sounds works out of headset. If I switch the default to my speakers and restart apps/web pages then sound does not play. I know my speakers are on because if I configure them through windows and test, the sounds play, and sounds also play when I test it through my audio manager. Even if I unplug my headset, I still cannot get sound out of my speakers unless I restart My audio manager is RealTek HD Audio Manager, Windows 7 x64. I have tried the speaker back, usb front. speaker front, usb in front port. I have not tried speaker back, usb back.

  Read the article

• Attempting to caue packet loss with netem doesn't work - possibly because of NAT (but delay does work)

  - by tomdee

  I have traffic from a WIFI access point routed via an Ubuntu box. I have two network interfaces which are NATed *filter :INPUT ACCEPT [11:690] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [37:6224] -A FORWARD -s 192.168.2.0/24 -i eth1 -o eth0 -m conntrack --ctstate NEW -j ACCEPT -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT COMMIT # Completed on Thu Mar 15 13:37:21 2012 # Generated by iptables-save v1.4.10 on Thu Mar 15 13:37:21 2012 *nat :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -j MASQUERADE COMMIT If I run a ping app on an Android device connected to the WIFI network I can happily ping google. If I use netem to introduce some delay tc qdisc change dev eth0 root netem delay 100ms I can clearly see pings taking longer. If I use netem to introduce some packet loss tc qdisc change dev ifb0 root netem loss 50% then I see no change. Packet loss does work fine for locally generated traffic, just not for traffic coming in over the network that's being NATed. Any ideas how to sort this out?

  Read the article

• Do you work in your server room?

  - by Gary Richardson

  I once had a job offer from a company that wanted my workstation to be in the AC controlled, noisy server room with no natural light. I'm not sure what their motivation was. Possibly it made sense to them for me to be close to the servers, or possibly they wanted to save the desk space for other employees. I turned down the job (for many reasons, including the working environment). Is this a common practice? Do you work in your LAN room? How do you cope?

  Read the article

• Getting the general log to work in MySQL 5.6.8

  - by Benjamin

  I can't get the general log to work in this version of MySQL. I added the following lines to /usr/my.cnf: general_log = 1 general_log_file = "/var/log/mysql.log" Then restarted the server: [root@localhost ~]# service mysql restart Shutting down MySQL.. SUCCESS! Starting MySQL. SUCCESS! The settings seem to be taken into account: mysql> SHOW VARIABLES LIKE 'general_log%'; +------------------+--------------------+ | Variable_name | Value | +------------------+--------------------+ | general_log | ON | | general_log_file | /var/log/mysql.log | +------------------+--------------------+ 2 rows in set (0.01 sec) But the log is never created: [root@localhost ~]# mysqladmin flush-logs [root@localhost ~]# ls -al /var/log/mysql.log ls: cannot access /var/log/mysql.log: No such file or directory Any idea why?

  Read the article

• Webcam and drivers for it don't work on Win8

  - by Frantumn

  The webcam on my Asus G51Jx doesn't work now that I've upgraded to Windows 8. I've looked on the Asus site, but they don't seem to have drivers for Windows 8 yet. At least on my machine. I've tried - Using the windows 7 drivers, but the installers aren't compatible. - Automatically detecting new hardware with the metro device manager - Automatically detecting new hardware with the classic windows device manager - using all available drivers for my laptop on the Asus site. Does anyone have any ideas that don't revolve around waiting for official release drivers?

  Read the article

• Video converters don't work anymore after reinstalling Windows

  - by tassiekev

  A few days ago, I decided to reinstall Windows 7 as my HD partition seemed to be nearly full and things were slowing down. I'd been using Handbrake almost exclusively to convert TV recordings and used Freemake on occasion. Following the reinstall, I can't get either to work: Handbrake says it's encoding for about 2 seconds and then says it's finished, but there are no converted files of any size. Freemake just says 'Conversion Error' and won't go any further. As an experiment I tried two programs that I don't normally use, VideoReDo & Any Video Converter. Both worked fine. Anyone got any clues?

  Read the article

• How does AuthzSVNAccessFile work?

  - by grigy

  I have set up an SVN repo with WebDAV access. For some reason it does not let checkout. Here is my httpd.conf part: <Location /svn> DAV svn SVNParentPath /home/svn/repositories AuthzSVNAccessFile /home/svn/dav_svn.authz Satisfy Any Require valid-user AuthType Basic AuthName "Subversion Repository" AuthUserFile /home/svn/dav_svn.passwd </Location> I have two repositories named "first" and "second" and the content of dav_svn.authz is: [first:/] doe = rw * = r [second:/] doe = rw grig = rw * = r When I'm trying to checkout the second with user doe, I get this in error_log: user doe: authentication failure for "/svn/second": Password Mismatch In order to understand what can be the problem I would like to better understand how the AuthzSVNAccessFile is supposed to work.

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >