reference count - Page 731

How to configure TATA Photon+ EC1261 HUAWEI

- by user3215

I'm running ubuntu 10.04. I have a newly purchased TATA Photon+ Internet connection which supports Windows and Mac. On the Internet I found a article saying that it could be configured on Linux. I followed the steps to install it on Ubuntu from this link. I am still not able to get online, and need some help. Also, it is very slow, but I was told that I would see speeds up to 3.1MB. I dont have wvdial installed and cannot install it from apt as I'm not connected to internet Booting from windows I dowloaded "wvdial" .deb package and tried to install on ubuntu but it's ended with dependency problem. Automatically, don't know how, I got connected to internet only for once. Immediately I installed wvdial package after this I followed the tutorials(I could not browse and upload the files here) . From then it's showing that the device is connected in the network connections but no internet connection. Once I disable the device, it won't show as connected again and I'll have to restart my system. Sometimes the device itself not detected(wondering if there is any command to re-read the all devices). output of wvdialconf /etc/wvdial.cof: #wvdialconf /etc/wvdial.conf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S1 S2 S3 WvModem<*1>: Cannot get information for serial port. ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB2<*1>: ATQ0 V1 E1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: HUAWEI TECHNOLOGIES CO., LTD ttyUSB2<*1>: Speed 9600: AT -- OK ttyUSB2<*1>: Max speed is 9600; that should be safe. ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found a modem on /dev/ttyUSB2. Modem configuration written to /etc/wvdial.conf. ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" output of wvdial: #wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT+CRM=1 AT+CRM=1 OK --> Modem initialized. --> Sending: ATDT#777 --> Waiting for carrier. ATDT#777 CONNECT --> Carrier detected. Starting PPP immediately. --> Starting pppd at Sat Oct 16 15:30:47 2010 --> Pid of pppd: 5681 --> Using interface ppp0 --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> local IP address 14.96.147.104 --> pppd: (u;[08]@s;[08]`{;[08] --> remote IP address 172.29.161.223 --> pppd: (u;[08]@s;[08]`{;[08] --> primary DNS address 121.40.152.90 --> pppd: (u;[08]@s;[08]`{;[08] --> secondary DNS address 121.40.152.100 --> pppd: (u;[08]@s;[08]`{;[08] Output of log message /var/log/messages: Oct 16 15:29:44 avyakta-desktop pppd[5119]: secondary DNS address 121.242.190.180 Oct 16 15:29:58 desktop pppd[5119]: Terminating on signal 15 Oct 16 15:29:58 desktop pppd[5119]: Connect time 0.3 minutes. Oct 16 15:29:58 desktop pppd[5119]: Sent 0 bytes, received 177 bytes. Oct 16 15:29:58 desktop pppd[5119]: Connection terminated. Oct 16 15:30:47 desktop pppd[5681]: pppd 2.4.5 started by root, uid 0 Oct 16 15:30:47 desktop pppd[5681]: Using interface ppp0 Oct 16 15:30:47 desktop pppd[5681]: Connect: ppp0 <--> /dev/ttyUSB2 Oct 16 15:30:47 desktop pppd[5681]: CHAP authentication succeeded Oct 16 15:30:47 desktop pppd[5681]: CHAP authentication succeeded Oct 16 15:30:48 desktop pppd[5681]: local IP address 14.96.147.104 Oct 16 15:30:48 desktop pppd[5681]: remote IP address 172.29.161.223 Oct 16 15:30:48 desktop pppd[5681]: primary DNS address 121.40.152.90 Oct 16 15:30:48 desktop pppd[5681]: secondary DNS address 121.40.152.100 EDIT 1 : I tried the following sudo stop network-manager sudo killall modem-manager sudo /usr/sbin/modem-manager --debug > ~/mm.log 2>&1 & sudo /usr/sbin/NetworkManager --no-daemon > ~/nm.log 2>&1 & Output of mm.log: #vim ~/mm.log: ** Message: Loaded plugin Option High-Speed ** Message: Loaded plugin Option ** Message: Loaded plugin Huawei ** Message: Loaded plugin Longcheer ** Message: Loaded plugin AnyData ** Message: Loaded plugin ZTE ** Message: Loaded plugin Ericsson MBM ** Message: Loaded plugin Sierra ** Message: Loaded plugin Generic ** Message: Loaded plugin Gobi ** Message: Loaded plugin Novatel ** Message: Loaded plugin Nokia ** Message: Loaded plugin MotoC Output of nm.log: #vim ~/nm.log: NetworkManager: <info> starting... NetworkManager: <info> modem-manager is now available NetworkManager: SCPlugin-Ifupdown: init! NetworkManager: SCPlugin-Ifupdown: update_system_hostname NetworkManager: SCPluginIfupdown: guessed connection type (eth0) = 802-3-ethernet NetworkManager: SCPlugin-Ifupdown: update_connection_setting_from_if_block: name:eth0, type:802-3-ethernet, id:Ifupdown (eth0), uuid: 681b428f-beaf-8932-dce4-678ed5bae28e NetworkManager: SCPlugin-Ifupdown: addresses count: 1 NetworkManager: SCPlugin-Ifupdown: No dns-nameserver configured in /etc/network/interfaces NetworkManager: nm-ifupdown-connection.c.119 - invalid connection read from /etc/network/interfaces: (1) addresses NetworkManager: SCPluginIfupdown: management mode: unmanaged NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:02:02.0/net/eth1, iface: eth1) NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:02:02.0/net/eth1, iface: eth1): no ifupdown configuration found. NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) @

Read the article

Inventory Management concepts in XNA game

- by user1332755

I am trying to code the inventory system in my first real game so I have very little experience in both c# and game engine development. Basically, I need some general guidance and tips with how to structure and organize these sorts of systems. Please tell me if I am on the right track or not before I get too deep into making some badly structured system. It's fine if you don't feel like looking through my code, suggestions about general structure would also be appreciated. What I am aiming to end up with is some sort of system like Minecraft or Terraria. It must include: main inventory GUI (items can be dragged and placed in whatever slot desired Itembar outside of the main inventory which can be assigned to certain items the ability to use items from either location So far, I have 4 main classes: Inventory holds the general info and methods, inventoryslot holds info for individual slots, Itembar holds all info and methods for itself, and finally, ItemManager to manage interactions between the two and hold a master list of items. So far, my itembar works perfectly and interacts well with mousedragging items into and out of it as well as activating the item effect. Here is the code I have so far: (there is a lot but I will try to keep it relevant) This is the code for the itembar on the main screen: class Itembar { public Texture2D itembarfull, iSelected; public static Rectangle itembar = new Rectangle(5, 218, 40, 391); public Rectangle box1 = new Rectangle(itembar.X, 218, 40, 40); //up to 10 Rectangles for each slot public int Selected = 0; private ItemManager manager; public Itembar(Texture2D texture, Texture2D texture3, ItemManager mann) { itembarfull = texture; iSelected = texture3; manager = mann; } public void Update(GameTime gametime) { } public void Draw(SpriteBatch spriteBatch) { spriteBatch.Draw( itembarfull, new Vector2 (itembar.X, itembar.Y), null, Color.White, 0.0f, Vector2.Zero, 1.0f, SpriteEffects.None, 1.0f); if (Selected == 1) spriteBatch.Draw(iSelected, new Rectangle(box1.X-3, box1.Y-3, box1.Width+6, box1.Height+6), Color.White); //goes up to 10 slots } public int Box1Query() { foreach (Item item in manager.items) { if(box1.Contains(item.BoundingBox)) return manager.items.IndexOf(item); } return 999; } //10 different box queries It is working fine right now. I just put an Item in there and the box will query things like the item's effects, stack number, consumable or not etc...This one is basically almost complete. Here is the main inventory class: class Inventory { public bool isActive; public List<Rectangle> mainSlots = new List<Rectangle>(24); public List<InventorySlot> mainSlotscheck = new List<InventorySlot>(24); public static Rectangle inv = new Rectangle(841, 469, 156, 231); public Rectangle invfull = new Rectangle(inv.X, inv.Y, inv.Width, inv.Height); public Rectangle inv1 = new Rectangle(inv.X + 4, inv.Y +3, 32, 32); //goes up to inv24 resulting in a 6x4 grid of Rectangles public Inventory() { mainSlots.Add(inv1); mainSlots.Add(inv2); mainSlots.Add(inv3); mainSlots.Add(inv4); //goes up to 24 foreach (Rectangle slot in mainSlots) mainSlotscheck.Add(new InventorySlot(slot)); } //update and draw methods are empty because im not too sure what to put there public int LookforfreeSlot() { int slotnumber = 999; for (int x = 0; x < mainSlots.Count; x++) { if (mainSlotscheck[x].isFree) { slotnumber = x; break; } } return slotnumber; } } } LookforFreeSlot() method is meant to be called when I do AddtoInventory(). I'm kinda stumped about what other things I need to put in this class. Here is the inventorySlot class: (its main purpose is to check the bool "isFree" to see whether or not something already occupies the slot. But i guess it can also do other stuff like get item info.) class InventorySlot { public int X, Y; public int Width = 32, Height = 32; public Vector2 Position; public int slotnumber; public bool free = true; public int? content = null; public bool isFree { get { return free; } set { free = value; } } public InventorySlot(Rectangle slot) { slot = new Rectangle(X, Y, Width, Height); } } } Finally, here is the ItemManager (I am omitting the master list because it is too long) class ItemManager { public List<Item> items = new List<Item>(20); public List<Item> inventory1 = new List<Item>(24); public List<Item> inventory2 = new List<Item>(24); public List<Item> inventory3 = new List<Item>(24); public List<Item> inventory4 = new List<Item>(24); public Texture2D icon, filta; private Rectangle msRect; MouseState mouseState; public int ISelectedIndex; Inventory inventory; SpriteFont font; public void GenerateItems() { items.Add(new Item(new Rectangle(0, 0, 32, 32), icon, font)); items[0].name = "Grass Chip"; items[0].itemID = 0; items[0].consumable = true; items[0].stackable = true; items[0].maxStack = 99; items.Add(new Item(new Rectangle(32, 0, 32, 32), icon, font)); //master list continues. it will generate all items in the game; } public ItemManager(Inventory inv, Texture2D itemsheet, Rectangle mouseRectt, MouseState ms, Texture2D fil, SpriteFont f) { icon = itemsheet; msRect = mouseRectt; filta = fil; mouseState = ms; inventory = inv; font = f; } //once again, no update or draw public void mousedrag() { items[0].DestinationRect = new Rectangle (msRect.X, msRect.Y, 32, 32); items[0].dragging = true; } public void AddtoInventory(Item item) { int index = inventory.LookforfreeSlot(); if (index == 999) return; item.DestinationRect = inventory.mainSlots[index]; inventory.mainSlotscheck[index].content = item.itemID; inventory.mainSlotscheck[index].isFree = false; item.IsActive = true; } } } The mousedrag works pretty well. AddtoInventory doesn't work because LookforfreeSlot doesn't work. Relevant code from the main program: When I want to add something to the main inventory, I do something like this: foreach (Particle ether in ether1.ethers) { if (ether.isCollected) itemmanager.AddtoInventory(itemmanager.items[14]); } This turned out to be much longer than I had expected :( But I hope someone is interested enough to comment.

Read the article

Neo4J and Azure and VS2012 and Windows 8

- by Chris Skardon

Now, I know that this has been written about, but both of the main places (http://www.richard-banks.org/2011/02/running-neo4j-on-azure.html and http://blog.neo4j.org/2011/02/announcing-neo4j-on-windows-azure.html) utilise VS2010, and well, I’m on VS2012 and Windows 8. Not that I think Win 8 had anything to do with it really, anyhews! I’m going to begin from the beginning, this is my first foray into running something on Azure, so it’s been a bit of a learning curve. But luckily the Neo4J guys have got us started, so let’s download the VS2010 solution: http://neo4j.org/get?file=Neo4j.Azure.Server.zip OK, the other thing we’ll need is the VS2012 Azure SDK, so let’s get that as well: http://www.windowsazure.com/en-us/develop/downloads/ (I just did the full install). Now, unzip the VS2010 solution and let’s open it in VS2012: <your location>\Neo4j.Azure.Server\Neo4j.Azure.Server.sln One-way-upgrade? Yer! Ignore the migration report – we don’t care! Let’s build that sucker… Ahhh 14 errors… WindowsAzure does not exist in the namespace ‘Microsoft’ Not a problem right? We’ve installed the SDK, just need to update the references: We can ignore the Test projects, they don’t use Azure, we’re interested in the other projects, so what we’ll do is remove the broken references, and add the correct ones, so expand the references bit of each project: hunt out those yellow exclamation marks, and delete them! You’ll need to add the right ones back in (listed below), when you go to the ‘Add Reference’ dialog make sure you have ‘Assemblies’ and ‘Framework’ selected before you seach (and search for ‘microsoft.win’ to narrow it down) So the references you need for each project are: CollectDiagnosticsData Microsoft.WindowsAzure.Diagnostics Microsoft.WindowsAzure.StorageClient Diversify.WindowsAzure.ServiceRuntime Microsoft.WindowsAzure.CloudDrive Microsoft.WindowsAzure.ServiceRuntime Microsoft.WindowsAzure.StorageClient Right, so let’s build again… Sweet! No errors. Now we need to setup our Blobs, I’m assuming you are using the most up-to-date Java you happened to have downloaded :) in my case that’s JRE7, and that is located in: C:\Program Files (x86)\Java\jre7 So, zip up that folder into whatever you want to call it, I went with jre7.zip, and stuck it in a temp folder for now. In that same temp folder I also copied the neo4j zip I was using: neo4j-community-1.7.2-windows.zip OK, now, we need to get these into our Blob storage, this is where a lot of stuff becomes unstuck - I didn’t find any applications that helped me use the blob storage, one would crash (because my internet speed is so slow) and the other just didn’t work – sure it looked like it had worked, but when push came to shove it didn’t. So this is how I got my files into Blob (local first): 1. Run the ‘Storage Emulator’ (just search for that in the start menu) 2. That takes a little while to start up so fire up another instance of Visual Studio in the mean time, and create a new Console Application. 3. Manage Nuget Packages for that solution and add ‘Windows Azure Storage’ Now you’re set up to add the code: public static void Main() { CloudStorageAccount cloudStorageAccount = CloudStorageAccount.DevelopmentStorageAccount; CloudBlobClient client = cloudStorageAccount.CreateCloudBlobClient(); client.Timeout = TimeSpan.FromMinutes(30); CloudBlobContainer container = client.GetContainerReference("neo4j"); //This will create it as well UploadBlob(container, "jre7.zip", "c:\\temp\\jre7.zip"); UploadBlob(container, "neo4j-community-1.7.2-windows.zip", "c:\\temp\\neo4j-community-1.7.2-windows.zip"); } private static void UploadBlob(CloudBlobContainer container, string blobName, string filename) { CloudBlob blob = container.GetBlobReference(blobName); using (FileStream fileStream = File.OpenRead(filename)) blob.UploadFromStream(fileStream); } This will upload the files to your local storage account (to switch to an Azure one, you’ll need to create a storage account, and use those credentials when you make your CloudStorageAccount above) To test you’ve got them uploaded correctly, go to: http://localhost:10000/devstoreaccount1/neo4j/jre7.zip and you will hopefully download the zip file you just uploaded. Now that those files are there, we are ready for some final configuration… Right click on the Neo4jServerHost role in the Neo4j.Azure.Server cloud project: Click on the ‘Settings’ tab and we’ll need to do some changes – by default, the 1.7.2 edition of neo4J unzips to: neo4j-community-1.7.2 So, we need to update all the ‘neo4j-1.3.M02’ directories to be ‘neo4j-community-1.7.2’, we also need to update the Java runtime location, so we start with this: and end with this: Now, I also changed the Endpoints settings, to be HTTP (from TCP) and to have a port of 7410 (mainly because that’s straight down on the numpad) The last ‘gotcha’ is some hard coded consts, which had me looking for ages, they are in the ‘ConfigSettings’ class of the ‘Neo4jServerHost’ project, and the ones we’re interested in are: Neo4jFileName JavaZipFileName Change those both to what that should be. OK Nearly there (I promise)! Run the ‘Compute Emulator’ (same deal with the Start menu), in your system tray you should have an Azure icon, when the compute emulator is up and running, right click on the icon and select ‘Show Compute Emulator UI’ The last steps! Make sure the ‘Neo4j.Azure.Server’ cloud project is set up as the start project and let’s hit F5 tension mounts, the build takes place (you need to accept the UAC warning) and VS does it’s stuff. If you look at the Compute Emulator UI you’ll see some log stuff (which you’ll need if this goes awry – but it won’t don’t worry!) In a bit, the console and a Java window will pop up: Then the console will bog off, leaving just the Java one, and if we switch back to the Compute Emulator UI and scroll up we should be able to see a line telling us the port number we’ve been assigned (in my case 7411): (If you can’t see it, don’t worry.. press CTRL+A on the emulator, then CTRL+C, copy all the text and paste it into something like Notepad, then just do a Find for ‘port’ you’ll soon see it) Go to your favourite browser, and head to: http://localhost:YOURPORT/ and you should see the WebAdmin! See you on the cloud side hopefully! Chris PS Other gotchas! OK, I’ve been caught out a couple of times: I had an instance of Neo4J running as a service on my machine, the Azure instance wanted to run the https version of the server on the same port as the Service was running on, and so Java would complain that the port was already in use.. The first time I converted the project, it didn’t update the version of the Azure library to load, in the App.Config of the Neo4jServerHost project, and VS would throw an exception saying it couldn’t find the Azure dll version 1.0.0.0.

Read the article

Are IE 9 will have a place in heart of user ?

- by anirudha

in a advertisement of IE 9 MSFT compare two product first is their IE9 and second is chrome 6. I know 6 is not currently [9] but no objection because may be they make ads when 6 is currently version and have RC or beta in their hands. on IE 9 test-drive website they show many of people ads to show the user that IE9 is performance better or other chrome or Firefox not. well they not compare with Firefox because last days firefox not still in news and search trends like before RC release many of user googling for them. Well I myself found IE9 perform smoother then chrome. but what MSFT do after IE9 nothing they waiting for IE 10 not for give updates not as well as Google chrome and Firefox. Are IE9 have anything new for Developer even a small or big. well they tell you blah or useless things everytime when they make for next version no matter for you but a matter for them because they add a new thing even useless for developer. I am not have any feeling with IE bad but I like to make reviews as well as I can make. I show you something who I experience with IE and someother browser like Chrome and Firefox. IE 9 still have no plugin as well as other provided like Firefox have Firebug a great utilities who is best option for developer to debug their code. IE9 developer tool is good but still you never customize them or readymade customization available to work as in firefox many of person make customization for firebug like example :- firepicker for picking color in firebug , firebug autocomplete for intellisense like feature when you write JavaScript inside console panel , pixelperfect , firequery , sitepoint reference and many other great example we all love to use. as other things that Firefox give many things customizable like themes , ui and many thing customization means more thing user or developer want to make themselves and more contribution make them better software so Firefox is great because customization is a great thing inside firefox and chrome. if you read some post of developer on MSDN to what’s new in IE 9 developer tool that you feel they are joking whenever you see some other things of Firefox and chrome. in a Firefox a plugin perform many much things but in IE still use IE 9 developer tool no other option like in Firefox use Firebug and many other utilities to make development easier and time saving and best as we can do.if you see Firefox page on mozilla that sublines of firefox is high performance easy customization advanced security well you can say what’s performance but there is no comparison with IE because IE have only performance and nothing else. but Firefox have these three thing to make product love. and third thing I really love that security yeah security. from long time before whenever IE6 is no hackproff and many other easily hack IE6 whenever Firefox is secure. I found myself that many of website install a software on client’s computer and they still not know about them so they track everything. sometime they hijack the homepage and make their website as their homepage. sometime they do something and you trying to go to any website then they go to their site first. the problem I telling about not long before it’s time of late in 2008 whenever Firefox is much better then IE6. if someone have bad experience with anyone of these software share with us I like to hear your voice. whenever IE still not for use Firefox is a good option for us even user or developer. I not know why someone make next version of IE. IE still have time to go away from Web. Firefox not rude as IE they still believe in user feedback and chrome is also open the door for feedback on their product gooogle Chrome. but what thing they made in IE on user feedback nothing. they still thing to teach what they maked not thing about what user need. if you spent some hour on firefox and chrome then you found what’s matter. what thing you have whenever you use IE or other browser like google chrome and Firefox :- as a user IE give you nothing even tell you blah blah and more blah but still next version of IE means next IE6 for the web. as in Google chrome you find plugins addons or customization to make experience better but in IE9 you can’t customize anything even the themes they have by default. Firefox already have a great list of plugins or addons to make experience better with Web but IE9 have nothing. this means IE9 not for user and other like chrome and firefox give you much better experience then IE. next thing after user is developer. first thing is that all developer want smooth development who save their time not take too perhaps saving.posts on IE9 show that a list of thing improved in IE 9 developer tool but are one developer tool enough for web development so developer need more utilities to solve different different type of puzzle who IE 9 never give like in Firefox you have utilities to do a task even small or big one. in chrome same experience you have but IE9 never give any plugin or utilities to make our work faster even they are new headache for developer because IE not give update as soon as other because in Firefox and in chrome if a bug is reported then they solve them fast and distribute them in next version of software very soon but in IE wait for a long time like IE 9 and IE 8 have no official release between them as update. As my conclusion there is no reason to use IE and adopt 9 again. it’s really not for Developer or user even newbie or smart people. as a rule I want to beware you with IE because it’s my responsibilities to move the thing in good way as I can make. well are you sure that there is no reason or profit they thing to have with IE9 if not why they forget luna [windows xp] user. because they are old nothing they want to force user to give them some money by purchasing a new version of OS. so this a thing why they marketed their software. if you thing about what firefox and chrome want to make : Mozilla's mission is to promote openness, innovation and opportunity on the web. chrome mission we all see whenever we use them. but IE9 is a trick they promote because they want to add something to next version of windows. if somebody like IE9 [even surprised by ads they see or post they read] then they purchase windows soon as they possible. Well you feel that I am opposition of IE9 and favor of chrome and Firefox yeah you feel right I hate IE from a heart not from a pencil. well you get same thing when you have trying three product major I described here Chrome firefox and IE. well don’t believe on the blogs , posts or article who are provided by the merchant or vender’s website. open the eyes read and thing what they talk and feel are they really true. if you confused that compare with some other. now you know the true because no one telling so badly as a user can described who use them not only one who make their feature. always open the eyes don’t believe use your mind and find the truth. thanks for reading my post good bye and take care

Read the article

Christmas in the Clouds

- by andrewbrust

I have been spending the last 2 weeks immersing myself in a number of Windows Azure and SQL Azure technologies. And in setting up a new business (I’ll speak more about that in the future), I have also become a customer of Microsoft’s BPOS (Business Productivity Online Services). In short, it has been a fortnight of Microsoft cloud computing. On the Azure side, I’ve looked, of course, at Web Roles and Worker Roles. But I’ve also looked at Azure Storage’s REST API (including coding to it directly), I’ve looked at Azure Drive and the new VM Role; I’ve looked quite a bit at SQL Azure (including the project “Houston” Silverlight UI) and I’ve looked at SQL Azure labs’ OData service too. I’ve also looked at DataMarket and its integration with both PowerPivot and native Excel. Then there’s AppFabric Caching, SQL Azure Reporting (what I could learn of it) and the Visual Studio tooling for Azure, including the storage of certificate-based credentials. And to round it out with some user stuff, on the BPOS side, I’ve been working with Exchange Online, SharePoint Online and LiveMeeting. I have to say I like a lot of what I’ve been seeing. Azure’s not perfect, and BPOS certainly isn’t either. But there’s good stuff in all these products, and there’s a lot of value. Azure Goes Deep Most people know that Web and Worker roles put the platform in charge of spinning virtual machines up and down, and keeping them up to date. But you can go way beyond that now. The still-in-beta VM Role gives you the power to craft the machine (much as does Amazon’s EC2), though it takes away the platform’s self-managing attributes. It still spins instances up and down, making drive storage non-durable, but Azure Drive gives you the ability to store VHD files as blobs and mount them as virtual hard drives that are readable and writeable. Whether with Azure Storage or SQL Azure, Azure does data. And OData is everywhere. Azure Table Storage supports an OData Interface. So does SQL Azure and so does DataMarket (the former project “Dallas”). That means that Azure data repositories aren’t just straightforward to provision and configure…they’re also easy to program against, from just about any programming environment, in a RESTful manner. And for more .NET-centric implementations, Azure AppFabric caching takes the technology formerly known as “Velocity” and throws it up into the cloud, speeding data access even more. Snapping in Place Once you get the hang of it, this stuff just starts to work in a way that becomes natural to understand. I wasn’t expecting that, and I was really happy to discover it. In retrospect, I am not surprised, because I think the various Azure teams are the center of gravity for Redmond’s innovation right now. The products belie this and so do my observations of the product teams’ motivation and high morale. It is really good to see this; Microsoft needs to lead somewhere, and they need to be seen as the underdog while doing so. With Azure, both requirements are in place. BPOS: Bad Acronym, Easy Setup BPOS is about products you already know; Exchange, SharePoint, Live Meeting and Office Communications Server. As such, it’s hard not to be underwhelmed by BPOS. Until you realize how easy it makes it to get all that stuff set up. I would say that from sign-up to productive use took me about 45 minutes…and that included the time necessary to wrestle with my DNS provider, set up Outlook and my SmartPhone up to talk to the Exchange account, create my SharePoint site collection, and configure the Outlook Conferencing add-in to talk to the provisioned Live Meeting account. Never before did I think setting up my own Exchange mail could come anywhere close to the simplicity of setting up an SMTP/POP account, and yet BPOS actually made it faster. What I want from my Azure Christmas Next Year Not everything about Microsoft’s cloud is good. I close this post with a list of things I’d like to see addressed: BPOS offerings are still based on the 2007 Wave of Microsoft server technologies. We need to get to 2010, and fast. Arguably, the 2010 products should have been released to the off-premises channel before the on-premise sone. Office 365 can’t come fast enough. Azure’s Internet tooling and domain naming, is scattered and confusing. Deployed ASP.NET applications go to cloudapp.net; SQL Azure and Azure storage work off windows.net. The Azure portal and Project Houston are at azure.com. Then there’s appfabriclabs.com and sqlazurelabs.com. There is a new Silverlight portal that replaces most, but not all of the HTML ones. And Project Houston is Silvelright-based too, though separate from the Silverlight portal tooling. Microsoft is the king off tooling. They should not make me keep an entire OneNote notebook full of portal links, account names, access keys, assemblies and namespaces and do so much CTRL-C/CTRL-V work. I’d like to see more project templates, have them automatically reference the appropriate assemblies, generate the right using/Imports statements and prime my config files with the right markup. Then I want a UI that lets me log in with my Live ID and pick the appropriate project, database, namespace and key string to get set up fast. Beta programs, if they’re open, should onboard me quickly. I know the process is difficult and everyone’s going as fast as they can. But I don’t know why it’s so difficult or why it takes so long. Getting developers up to speed on new features quickly helps popularize the platform. Make this a priority. Make Azure accessible from the simplicity platforms, i.e. ASP.NET Web Pages (Razor) and LightSwitch. Support .NET 4 now. Make WebMatrix, IIS Express and SQL Compact work with the Azure development fabric. Have HTML helpers make Azure programming easier. Have LightSwitch work with SQL Azure and not require SQL Express. LightSwitch has some promising Azure integration now. But we need more. WebMatrix has none and that’s just silly, now that the Extra Small Instance is being introduced. The Windows Azure Platform Training Kit is great. But I want Microsoft to make it even better and I want them to evangelize it much more aggressively. There’s a lot of good material on Azure development out there, but it’s scattered in the same way that the platform is. The Training Kit ties a lot of disparate stuff together nicely. Make it known. Should Old Acquaintance Be Forgot All in all, diving deep into Azure was a good way to end the year. Diving deeper into Azure should a great way to spend next year, not just for me, but for Microsoft too.

Read the article

Learnings from trying to write better software: Loud errors from the very start

- by theo.spears

Microsoft made a very small number of backwards incompatible changes between .NET 1.1 and 2.0, because they wanted to make it as easy and safe as possible to port applications to the new runtime. (Here’s a list.) However, one thing they did change was what happens when a background thread fails with an unhanded exception - in .NET 1.1 nothing happened, the thread terminated, and the application continued oblivious. Try the same trick in .NET 2.0 and the entire application, including all threads, will rudely terminate. There are three reasons for this. Firstly if a background thread has crashed, it may have left the entire application in an inconsistent state, in a way that will affect other threads. It’s better to terminate the entire application than continue and have the application perform actions based on a broken state, for example take customer orders, or write corrupt files to disk. Secondly, during software development, it is far better for errors to be loud and obtrusive. Even if you have unit tests and integration tests (and you should), a key part of ensuring software works properly is to actually try using it, both through systematic testing and through the casual use all software gets by its developers during use. Subtle errors are easy to miss if you are not actually doing real work using the application, loud errors are obvious. Thirdly, and most importantly, even if catching and swallowing exceptions indiscriminately doesn't cause any problems in your application, the presence of unexpected exceptions shows you do not fully understand the behavior of your code. The currently released version of your application may be absolutely correct. However, because your mental model of the behavior is wrong, any future change you make to the program could and probably will introduce critical errors. This applies to more than just exceptions causing threads to exit, any unexpected state should make the application blow up in an un-ignorable way. The worst thing you can do is silently swallow errors and continue. And let's be clear, writing to a log file does not count as blowing up in an un-ignorable way. This is all simple as long as the call stack only contains your code, but when your functions start to be called by third party or .NET framework code, it's surprisingly easy for exceptions to start vanishing. Let's look at two examples. 1. Windows forms drag drop events Usually if you throw an exception from a winforms event handler it will bring up the "application has crashed" dialog with abort and continue options. This is a good default behavior - the error is big and loud, but it is possible for the user to ignore the error and hopefully save their data, if somehow this bug makes it past testing. However drag and drop are different - throw an exception from one of these and it will just be silently swallowed with no explanation. By the way, it's not just drag and drop events. Timer events do it too. You can research how exceptions are treated in different handlers and code appropriately, but the safest and most user friendly approach is to always catch exceptions in your event handlers and show your own error message. I'll talk about one good approach to handling these exceptions at the end of this post. 2. SSMS integration for SQL Tab Magic A while back wrote an SSMS add-in called SQL Tab Magic (learn more about the process here). It works by listening to certain SSMS events and remembering what documents are opened and closed. I deployed it internally and it was used for a few months by a number of people without problems, so I was reasonably confident in its quality. Before releasing I made a few cleanups, including introducing error reporting. Bam. A few days later I was looking at over 1,000 error reports in my inbox. In turns out I wasn't handling table designers properly. The exceptions were there, but again SSMS was helpfully swallowing them all for me, so I was blissfully unaware. Had I made my errors loud from the start, I would have noticed these issues long before and fixed them. Handling exceptions Now you are systematically catching exceptions throughout your application, you need to do something with them. I've tried 3 options: log them, alert the user, and automatically send them home. There are a few good options for logging in .NET. The most widespread is Apache log4net, which provides a very capable and configurable logging framework. There is also NLog which has a compatible interface, with a greater emphasis on fluent rather than XML configuration. Alerting the user serves two purposes. Firstly it means they understand their action has failed to they don't just assume it worked (Silent file copy failure is a problem if you then delete the originals) or that they should keep waiting for a background task to complete. Secondly, it means the users can report the bug to your support team, and then you can fix it. This means the message you show the user should contain the information you need as a developer to identify and fix it. And the user will probably just send you a screenshot of the dialog, so it shouldn't be hidden by scroll bars. This leads us to the third option, automatically sending error reports home. By automatic I mean with minimal effort on the part of the user, rather than doing it silently behind their backs. The advantage of this is you can send back far more detailed and precise information than you can expect a user to include in an email, and by making it easier to report errors, you make it more likely users will do so. We do this using a great tool called SmartAssembly (full disclosure: this is a product made by Red Gate). It captures complete stack traces including the values of all local variables and then allows the user to send all this information back with a single click. We also capture log files to help understand what lead up to the error. We then use the free SmartAssembly Sync for Jira to dedupe these reports and raise them as bugs in our bug tracking system. The combined effect of loud errors during development and then automatic error reporting once software is deployed allows us to find and fix more bugs, correct misunderstandings on how our software works, and overall is a key piece in delivering higher quality software. However it is no substitute for having motivated cunning testers in the building - and we're looking to hire more of those too. If you found this post interesting you should follow me on twitter.

Read the article

The Sensemaking Spectrum for Business Analytics: Translating from Data to Business Through Analysis

- by Joe Lamantia

One of the most compelling outcomes of our strategic research efforts over the past several years is a growing vocabulary that articulates our cumulative understanding of the deep structure of the domains of discovery and business analytics. Modes are one example of the deep structure we’ve found. After looking at discovery activities across a very wide range of industries, question types, business needs, and problem solving approaches, we've identified distinct and recurring kinds of sensemaking activity, independent of context. We label these activities Modes: Explore, compare, and comprehend are three of the nine recognizable modes. Modes describe *how* people go about realizing insights. (Read more about the programmatic research and formal academic grounding and discussion of the modes here: https://www.researchgate.net/publication/235971352_A_Taxonomy_of_Enterprise_Search_and_Discovery) By analogy to languages, modes are the 'verbs' of discovery activity. When applied to the practical questions of product strategy and development, the modes of discovery allow one to identify what kinds of analytical activity a product, platform, or solution needs to support across a spread of usage scenarios, and then make concrete and well-informed decisions about every aspect of the solution, from high-level capabilities, to which specific types of information visualizations better enable these scenarios for the types of data users will analyze. The modes are a powerful generative tool for product making, but if you've spent time with young children, or had a really bad hangover (or both at the same time...), you understand the difficult of communicating using only verbs. So I'm happy to share that we've found traction on another facet of the deep structure of discovery and business analytics. Continuing the language analogy, we've identified some of the ‘nouns’ in the language of discovery: specifically, the consistently recurring aspects of a business that people are looking for insight into. We call these discovery Subjects, since they identify *what* people focus on during discovery efforts, rather than *how* they go about discovery as with the Modes. Defining the collection of Subjects people repeatedly focus on allows us to understand and articulate sense making needs and activity in more specific, consistent, and complete fashion. In combination with the Modes, we can use Subjects to concretely identify and define scenarios that describe people’s analytical needs and goals. For example, a scenario such as ‘Explore [a Mode] the attrition rates [a Measure, one type of Subject] of our largest customers [Entities, another type of Subject] clearly captures the nature of the activity — exploration of trends vs. deep analysis of underlying factors — and the central focus — attrition rates for customers above a certain set of size criteria — from which follow many of the specifics needed to address this scenario in terms of data, analytical tools, and methods. We can also use Subjects to translate effectively between the different perspectives that shape discovery efforts, reducing ambiguity and increasing impact on both sides the perspective divide. For example, from the language of business, which often motivates analytical work by asking questions in business terms, to the perspective of analysis. The question posed to a Data Scientist or analyst may be something like “Why are sales of our new kinds of potato chips to our largest customers fluctuating unexpectedly this year?” or “Where can innovate, by expanding our product portfolio to meet unmet needs?”. Analysts translate questions and beliefs like these into one or more empirical discovery efforts that more formally and granularly indicate the plan, methods, tools, and desired outcomes of analysis. From the perspective of analysis this second question might become, “Which customer needs of type ‘A', identified and measured in terms of ‘B’, that are not directly or indirectly addressed by any of our current products, offer 'X' potential for ‘Y' positive return on the investment ‘Z' required to launch a new offering, in time frame ‘W’? And how do these compare to each other?”. Translation also happens from the perspective of analysis to the perspective of data; in terms of availability, quality, completeness, format, volume, etc. By implication, we are proposing that most working organizations — small and large, for profit and non-profit, domestic and international, and in the majority of industries — can be described for analytical purposes using this collection of Subjects. This is a bold claim, but simplified articulation of complexity is one of the primary goals of sensemaking frameworks such as this one. (And, yes, this is in fact a framework for making sense of sensemaking as a category of activity - but we’re not considering the recursive aspects of this exercise at the moment.) Compellingly, we can place the collection of subjects on a single continuum — we call it the Sensemaking Spectrum — that simply and coherently illustrates some of the most important relationships between the different types of Subjects, and also illuminates several of the fundamental dynamics shaping business analytics as a domain. As a corollary, the Sensemaking Spectrum also suggests innovation opportunities for products and services related to business analytics. The first illustration below shows Subjects arrayed along the Sensemaking Spectrum; the second illustration presents examples of each kind of Subject. Subjects appear in colors ranging from blue to reddish-orange, reflecting their place along the Spectrum, which indicates whether a Subject addresses more the viewpoint of systems and data (Data centric and blue), or people (User centric and orange). This axis is shown explicitly above the Spectrum. Annotations suggest how Subjects align with the three significant perspectives of Data, Analysis, and Business that shape business analytics activity. This rendering makes explicit the translation and bridging function of Analysts as a role, and analysis as an activity. Subjects are best understood as fuzzy categories [http://georgelakoff.files.wordpress.com/2011/01/hedges-a-study-in-meaning-criteria-and-the-logic-of-fuzzy-concepts-journal-of-philosophical-logic-2-lakoff-19731.pdf], rather than tightly defined buckets. For each Subject, we suggest some of the most common examples: Entities may be physical things such as named products, or locations (a building, or a city); they could be Concepts, such as satisfaction; or they could be Relationships between entities, such as the variety of possible connections that define linkage in social networks. Likewise, Events may indicate a time and place in the dictionary sense; or they may be Transactions involving named entities; or take the form of Signals, such as ‘some Measure had some value at some time’ - what many enterprises understand as alerts. The central story of the Spectrum is that though consumers of analytical insights (represented here by the Business perspective) need to work in terms of Subjects that are directly meaningful to their perspective — such as Themes, Plans, and Goals — the working realities of data (condition, structure, availability, completeness, cost) and the changing nature of most discovery efforts make direct engagement with source data in this fashion impossible. Accordingly, business analytics as a domain is structured around the fundamental assumption that sense making depends on analytical transformation of data. Analytical activity incrementally synthesizes more complex and larger scope Subjects from data in its starting condition, accumulating insight (and value) by moving through a progression of stages in which increasingly meaningful Subjects are iteratively synthesized from the data, and recombined with other Subjects. The end goal of ‘laddering’ successive transformations is to enable sense making from the business perspective, rather than the analytical perspective.Synthesis through laddering is typically accomplished by specialized Analysts using dedicated tools and methods. Beginning with some motivating question such as seeking opportunities to increase the efficiency (a Theme) of fulfillment processes to reach some level of profitability by the end of the year (Plan), Analysts will iteratively wrangle and transform source data Records, Values and Attributes into recognizable Entities, such as Products, that can be combined with Measures or other data into the Events (shipment of orders) that indicate the workings of the business. More complex Subjects (to the right of the Spectrum) are composed of or make reference to less complex Subjects: a business Process such as Fulfillment will include Activities such as confirming, packing, and then shipping orders. These Activities occur within or are conducted by organizational units such as teams of staff or partner firms (Networks), composed of Entities which are structured via Relationships, such as supplier and buyer. The fulfillment process will involve other types of Entities, such as the products or services the business provides. The success of the fulfillment process overall may be judged according to a sophisticated operating efficiency Model, which includes tiered Measures of business activity and health for the transactions and activities included. All of this may be interpreted through an understanding of the operational domain of the businesses supply chain (a Domain). We'll discuss the Spectrum in more depth in succeeding posts.

Read the article

Retrieving a list of eBay categories using the .NET SDK and GetCategoriesCall

- by Bill Osuch

eBay offers a .Net SDK for its Trading API - this post will show you the basics of making an API call and retrieving a list of current categories. You'll need the category ID(s) for any apps that post or search eBay. To start, download the latest SDK from https://www.x.com/developers/ebay/documentation-tools/sdks/dotnet and create a new console app project. Add a reference to the eBay.Service DLL, and a few using statements: using eBay.Service.Call; using eBay.Service.Core.Sdk; using eBay.Service.Core.Soap; I'm assuming at this point you've already joined the eBay Developer Network and gotten your app IDs and user tokens. If not: Join the developer program Generate tokens Next, add an app.config file that looks like this: <?xml version="1.0"?> <configuration> <appSettings> <add key="Environment.ApiServerUrl" value="https://api.ebay.com/wsapi"/> <add key="UserAccount.ApiToken" value="YourBigLongToken"/> </appSettings> </configuration> And then add the code to get the xml list of categories: ApiContext apiContext = GetApiContext(); GetCategoriesCall apiCall = new GetCategoriesCall(apiContext); apiCall.CategorySiteID = "0"; //Leave this commented out to retrieve all category levels (all the way down): //apiCall.LevelLimit = 4; //Uncomment this to begin at a specific parent category: //StringCollection parentCategories = new StringCollection(); //parentCategories.Add("63"); //apiCall.CategoryParent = parentCategories; apiCall.DetailLevelList.Add(DetailLevelCodeType.ReturnAll); CategoryTypeCollection cats = apiCall.GetCategories(); using (StreamWriter outfile = new StreamWriter(@"C:\Temp\EbayCategories.xml")) { outfile.Write(apiCall.SoapResponse); } GetApiContext() (provided in the sample apps in the SDK) is required for any call: static ApiContext GetApiContext() { //apiContext is a singleton, //to avoid duplicate configuration reading if (apiContext != null) { return apiContext; } else { apiContext = new ApiContext(); //set Api Server Url apiContext.SoapApiServerUrl = ConfigurationManager.AppSettings["Environment.ApiServerUrl"]; //set Api Token to access eBay Api Server ApiCredential apiCredential = new ApiCredential(); apiCredential.eBayToken = ConfigurationManager.AppSettings["UserAccount.ApiToken"]; apiContext.ApiCredential = apiCredential; //set eBay Site target to US apiContext.Site = SiteCodeType.US; return apiContext; } } Running this will give you a large (4 or 5 megs) XML file that looks something like this: <soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"> <soapenv:Body> <GetCategoriesResponse > <Timestamp>2012-06-06T16:03:46.158Z</Timestamp> <Ack>Success</Ack> <CorrelationID>d02dd9e3-295a-4268-9ea5-554eeb2e0e18</CorrelationID> <Version>775</Version> <Build>E775_CORE_BUNDLED_14891042_R1</Build> - <CategoryArray> <Category> <BestOfferEnabled>true</BestOfferEnabled> <AutoPayEnabled>true</AutoPayEnabled> <CategoryID>20081</CategoryID> <CategoryLevel>1</CategoryLevel> <CategoryName>Antiques</CategoryName> <CategoryParentID>20081</CategoryParentID> </Category> <Category> <BestOfferEnabled>true</BestOfferEnabled> <AutoPayEnabled>true</AutoPayEnabled> <CategoryID>37903</CategoryID> <CategoryLevel>2</CategoryLevel> <CategoryName>Antiquities</CategoryName> <CategoryParentID>20081</CategoryParentID> </Category> (etc.) You could work with this, but I wanted a nicely nested view, like this: <CategoryArray> <Category Name='Antiques' ID='20081' Level='1'> <Category Name='Antiquities' ID='37903' Level='2'/> </CategoryArray> ...so I transformed the xml: private void TransformXML(CategoryTypeCollection cats) { XmlElement topLevelElement = null; XmlElement childLevelElement = null; XmlNode parentNode = null; string categoryString = ""; XmlDocument returnDoc = new XmlDocument(); XmlElement root = returnDoc.CreateElement("CategoryArray"); returnDoc.AppendChild(root); XmlNode rootNode = returnDoc.SelectSingleNode("/CategoryArray"); //Loop through CategoryTypeCollection foreach (CategoryType category in cats) { if (category.CategoryLevel == 1) { //Top-level category, so we know we can just add it topLevelElement = returnDoc.CreateElement("Category"); topLevelElement.SetAttribute("Name", category.CategoryName); topLevelElement.SetAttribute("ID", category.CategoryID); rootNode.AppendChild(topLevelElement); } else { // Level number will determine how many Category nodes we are deep categoryString = ""; for (int x = 1; x < category.CategoryLevel; x++) { categoryString += "/Category"; } parentNode = returnDoc.SelectSingleNode("/CategoryArray" + categoryString + "[@ID='" + category.CategoryParentID[0] + "']"); childLevelElement = returnDoc.CreateElement("Category"); childLevelElement.SetAttribute("Name", category.CategoryName); childLevelElement.SetAttribute("ID", category.CategoryID); parentNode.AppendChild(childLevelElement); } } returnDoc.Save(@"C:\Temp\EbayCategories-Modified.xml"); } Yes, there are probably much cleaner ways of dealing with it, but I'm not an xml expert… Keep in mind, eBay categories do not change on a regular basis, so you should be able to cache this data (either in a file or database) for some time. The xml returns a CategoryVersion node that you can use to determine if the category list has changed. Technorati Tags: Csharp, eBay

Read the article

Benchmarking MySQL Replication with Multi-Threaded Slaves

- by Mat Keep

0 0 1 1145 6530 Homework 54 15 7660 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-ansi-language:EN-US;} The objective of this benchmark is to measure the performance improvement achieved when enabling the Multi-Threaded Slave enhancement delivered as a part MySQL 5.6. As the results demonstrate, Multi-Threaded Slaves delivers 5x higher replication performance based on a configuration with 10 databases/schemas. For real-world deployments, higher replication performance directly translates to: · Improved consistency of reads from slaves (i.e. reduced risk of reading "stale" data) · Reduced risk of data loss should the master fail before replicating all events in its binary log (binlog) The multi-threaded slave splits processing between worker threads based on schema, allowing updates to be applied in parallel, rather than sequentially. This delivers benefits to those workloads that isolate application data using databases - e.g. multi-tenant systems deployed in cloud environments. Multi-Threaded Slaves are just one of many enhancements to replication previewed as part of the MySQL 5.6 Development Release, which include: · Global Transaction Identifiers coupled with MySQL utilities for automatic failover / switchover and slave promotion · Crash Safe Slaves and Binlog · Optimized Row Based Replication · Replication Event Checksums · Time Delayed Replication These and many more are discussed in the “MySQL 5.6 Replication: Enabling the Next Generation of Web & Cloud Services” Developer Zone article Back to the benchmark - details are as follows. Environment The test environment consisted of two Linux servers: · one running the replication master · one running the replication slave. Only the slave was involved in the actual measurements, and was based on the following configuration: - Hardware: Oracle Sun Fire X4170 M2 Server - CPU: 2 sockets, 6 cores with hyper-threading, 2930 MHz. - OS: 64-bit Oracle Enterprise Linux 6.1 - Memory: 48 GB Test Procedure Initial Setup: Two MySQL servers were started on two different hosts, configured as replication master and slave. 10 sysbench schemas were created, each with a single table: CREATE TABLE `sbtest` ( `id` int(10) unsigned NOT NULL AUTO_INCREMENT, `k` int(10) unsigned NOT NULL DEFAULT '0', `c` char(120) NOT NULL DEFAULT '', `pad` char(60) NOT NULL DEFAULT '', PRIMARY KEY (`id`), KEY `k` (`k`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1 10,000 rows were inserted in each of the 10 tables, for a total of 100,000 rows. When the inserts had replicated to the slave, the slave threads were stopped. The slave data directory was copied to a backup location and the slave threads position in the master binlog noted. 10 sysbench clients, each configured with 10 threads, were spawned at the same time to generate a random schema load against each of the 10 schemas on the master. Each sysbench client executed 10,000 "update key" statements: UPDATE sbtest set k=k+1 WHERE id = <random row> In total, this generated 100,000 update statements to later replicate during the test itself. Test Methodology: The number of slave workers to test with was configured using: SET GLOBAL slave_parallel_workers=<workers> Then the slave IO thread was started and the test waited for all the update queries to be copied over to the relay log on the slave. The benchmark clock was started and then the slave SQL thread was started. The test waited for the slave SQL thread to finish executing the 100k update queries, doing "select master_pos_wait()". When master_pos_wait() returned, the benchmark clock was stopped and the duration calculated. The calculated duration from the benchmark clock should be close to the time it took for the SQL thread to execute the 100,000 update queries. The 100k queries divided by this duration gave the benchmark metric, reported as Queries Per Second (QPS). Test Reset: The test-reset cycle was implemented as follows: · the slave was stopped · the slave data directory replaced with the previous backup · the slave restarted with the slave threads replication pointer repositioned to the point before the update queries in the binlog. The test could then be repeated with identical set of queries but a different number of slave worker threads, enabling a fair comparison. The Test-Reset cycle was repeated 3 times for 0-24 number of workers and the QPS metric calculated and averaged for each worker count. MySQL Configuration The relevant configuration settings used for MySQL are as follows: binlog-format=STATEMENT relay-log-info-repository=TABLE master-info-repository=TABLE As described in the test procedure, the slave_parallel_workers setting was modified as part of the test logic. The consequence of changing this setting is: 0 worker threads: - current (i.e. single threaded) sequential mode - 1 x IO thread and 1 x SQL thread - SQL thread both reads and executes the events 1 worker thread: - sequential mode - 1 x IO thread, 1 x Coordinator SQL thread and 1 x Worker thread - coordinator reads the event and hands it to the worker who executes 2+ worker threads: - parallel execution - 1 x IO thread, 1 x Coordinator SQL thread and 2+ Worker threads - coordinator reads events and hands them to the workers who execute them Results Figure 1 below shows that Multi-Threaded Slaves deliver ~5x higher replication performance when configured with 10 worker threads, with the load evenly distributed across our 10 x schemas. This result is compared to the current replication implementation which is based on a single SQL thread only (i.e. zero worker threads). Figure 1: 5x Higher Performance with Multi-Threaded Slaves The following figure shows more detailed results, with QPS sampled and reported as the worker threads are incremented. The raw numbers behind this graph are reported in the Appendix section of this post. Figure 2: Detailed Results As the results above show, the configuration does not scale noticably from 5 to 9 worker threads. When configured with 10 worker threads however, scalability increases significantly. The conclusion therefore is that it is desirable to configure the same number of worker threads as schemas. Other conclusions from the results: · Running with 1 worker compared to zero workers just introduces overhead without the benefit of parallel execution. · As expected, having more workers than schemas adds no visible benefit. Aside from what is shown in the results above, testing also demonstrated that the following settings had a very positive effect on slave performance: relay-log-info-repository=TABLE master-info-repository=TABLE For 5+ workers, it was up to 2.3 times as fast to run with TABLE compared to FILE. Conclusion As the results demonstrate, Multi-Threaded Slaves deliver significant performance increases to MySQL replication when handling multiple schemas. This, and the other replication enhancements introduced in MySQL 5.6 are fully available for you to download and evaluate now from the MySQL Developer site (select Development Release tab). You can learn more about MySQL 5.6 from the documentation Please don’t hesitate to comment on this or other replication blogs with feedback and questions. Appendix – Detailed Results

Read the article

RIF PRD: Presentation syntax issues

- by Charles Young

Over Christmas I got to play a bit with the W3C RIF PRD and came across a few issues which I thought I would record for posterity. Specifically, I was working on a grammar for the presentation syntax using a GLR grammar parser tool (I was using the current CTP of ‘M’ (MGrammer) and Intellipad – I do so hope the MS guys don’t kill off M and Intellipad now they have dropped the other parts of SQL Server Modelling). I realise that the presentation syntax is non-normative and that any issues with it do not therefore compromise the standard. However, presentation syntax is useful in its own right, and it would be great to iron out any issues in a future revision of the standard. The main issues are actually not to do with the grammar at all, but rather with the ‘running example’ in the RIF PRD recommendation. I started with the code provided in Example 9.1. There are several discrepancies when compared with the EBNF rules documented in the standard. Broadly the problems can be categorised as follows: · Parenthesis mismatch – the wrong number of parentheses are used in various places. For example, in GoldRule, the RHS of the rule (the ‘Then’) is nested in the LHS (‘the If’). In NewCustomerAndWidgetRule, the RHS is orphaned from the LHS. Together with additional incorrect parenthesis, this leads to orphanage of UnknownStatusRule from the entire Document. · Invalid use of parenthesis in ‘Forall’ constructs. Parenthesis should not be used to enclose formulae. Removal of the invalid parenthesis gave me a feeling of inconsistency when comparing formulae in Forall to formulae in If. The use of parenthesis is not actually inconsistent in these two context, but in an If construct it ‘feels’ as if you are enclosing formulae in parenthesis in a LISP-like fashion. In reality, the parenthesis is simply being used to group subordinate syntax elements. The fact that an If construct can contain only a single formula as an immediate child adds to this feeling of inconsistency. · Invalid representation of compact URIs (CURIEs) in the context of Frame productions. In several places the URIs are not qualified with a namespace prefix (‘ex1:’). This conflicts with the definition of CURIEs in the RIF Datatypes and Built-Ins 1.0 document. Here are the productions: CURIE ::= PNAME_LN | PNAME_NS PNAME_LN ::= PNAME_NS PN_LOCAL PNAME_NS ::= PN_PREFIX? ':' PN_LOCAL ::= ( PN_CHARS_U | [0-9] ) ((PN_CHARS|'.')* PN_CHARS)? PN_CHARS ::= PN_CHARS_U | '-' | [0-9] | #x00B7 | [#x0300-#x036F] | [#x203F-#x2040] PN_CHARS_U ::= PN_CHARS_BASE | '_' PN_CHARS_BASE ::= [A-Z] | [a-z] | [#x00C0-#x00D6] | [#x00D8-#x00F6] | [#x00F8-#x02FF] | [#x0370-#x037D] | [#x037F-#x1FFF] | [#x200C-#x200D] | [#x2070-#x218F] | [#x2C00-#x2FEF] | [#x3001-#xD7FF] | [#xF900-#xFDCF] | [#xFDF0-#xFFFD] | [#x10000-#xEFFFF] PN_PREFIX ::= PN_CHARS_BASE ((PN_CHARS|'.')* PN_CHARS)? The more I look at CURIEs, the more my head hurts! The RIF specification allows prefixes and colons without local names, which surprised me. However, the CURIE Syntax 1.0 working group note specifically states that this form is supported…and then promptly provides a syntactic definition that seems to preclude it! However, on (much) deeper inspection, it appears that ‘ex1:’ (for example) is allowed, but would really represent a ‘fragment’ of the ‘reference’, rather than a prefix! Ouch! This is so completely ambiguous that it surely calls into question the whole CURIE specification. In any case, RIF does not allow local names without a prefix. · Missing ‘External’ specifiers for built-in functions and predicates. The EBNF specification enforces this for terms within frames, but does not appear to enforce (what I believe is) the correct use of External on built-in predicates. In any case, the running example only specifies ‘External’ once on the predicate in UnknownStatusRule. External() is required in several other places. · The List used on the LHS of UnknownStatusRule is comma-delimited. This is not supported by the EBNF definition. Similarly, the argument list of pred:list-contains is illegally comma-delimited. · Unnecessary use of conjunction around a single formula in DiscountRule. This is strictly legal in the EBNF, but redundant. All the above issues concern the presentation syntax used in the running example. There are a few minor issues with the grammar itself. Note that Michael Kiefer stated in his paper “Rule Interchange Format: The Framework” that: “The presentation syntax of RIF … is an abstract syntax and, as such, it omits certain details that might be important for unambiguous parsing.” · The grammar cannot differentiate unambiguously between strategies and priorities on groups. A processor is forced to resolve this by detecting the use of IRIs and integers. This could easily be fixed in the grammar. · The grammar cannot unambiguously parse the ‘->’ operator in frames. Specifically, ‘-’ characters are allowed in PN_LOCAL names and hence a parser cannot determine if ‘status->’ is (‘status’ ‘->’) or (‘status-’ ‘>’). One way to fix this is to amend the PN_LOCAL production as follows: PN_LOCAL ::= ( PN_CHARS_U | [0-9] ) ((PN_CHARS|'.')* ((PN_CHARS)-('-')))? However, unilaterally changing the definition of this production, which is defined in the SPARQL Query Language for RDF specification, makes me uncomfortable. · I assume that the presentation syntax is case-sensitive. I couldn’t find this stated anywhere in the documentation, but function/predicate names do appear to be documented as being case-sensitive. · The EBNF does not specify whitespace handling. A couple of productions (RULE and ACTION_BLOCK) are crafted to enforce the use of whitespace. This is not necessary. It seems inconsistent with the rest of the specification and can cause parsing issues. In addition, the Const production exhibits whitespaces issues. The intention may have been to disallow the use of whitespace around ‘^^’, but any direct implementation of the EBNF will probably allow whitespace between ‘^^’ and the SYMSPACE. Of course, I am being a little nit-picking about all this. On the whole, the EBNF translated very smoothly and directly to ‘M’ (MGrammar) and proved to be fairly complete. I have encountered far worse issues when translating other EBNF specifications into usable grammars. I can’t imagine there would be any difficulty in implementing the same grammar in Antlr, COCO/R, gppg, XText, Bison, etc. A general observation, which repeats a point made above, is that the use of parenthesis in the presentation syntax can feel inconsistent and un-intuitive. It isn’t actually inconsistent, but I think the presentation syntax could be improved by adopting braces, rather than parenthesis, to delimit subordinate syntax elements in a similar way to so many programming languages. The familiarity of braces would communicate the structure of the syntax more clearly to people like me. If braces were adopted, parentheses could be retained around ‘var (frame | ‘new()’) constructs in action blocks. This use of parenthesis feels very LISP-like, and I think that this is my issue. It’s as if the presentation syntax represents the deformed love-child of LISP and C. In some places (specifically, action blocks), parenthesis is used in a LISP-like fashion. In other places it is used like braces in C. I find this quite confusing. Here is a corrected version of the running example (Example 9.1) in compliant presentation syntax: Document( Prefix( ex1 <http://example.com/2009/prd2> ) (* ex1:CheckoutRuleset *) Group rif:forwardChaining ( (* ex1:GoldRule *) Group 10 ( Forall ?customer such that And(?customer # ex1:Customer ?customer[ex1:status->"Silver"]) (Forall ?shoppingCart such that ?customer[ex1:shoppingCart->?shoppingCart] (If Exists ?value (And(?shoppingCart[ex1:value->?value] External(pred:numeric-greater-than-or-equal(?value 2000)))) Then Do(Modify(?customer[ex1:status->"Gold"]))))) (* ex1:DiscountRule *) Group ( Forall ?customer such that ?customer # ex1:Customer (If Or( ?customer[ex1:status->"Silver"] ?customer[ex1:status->"Gold"]) Then Do ((?s ?customer[ex1:shoppingCart-> ?s]) (?v ?s[ex1:value->?v]) Modify(?s [ex1:value->External(func:numeric-multiply (?v 0.95))])))) (* ex1:NewCustomerAndWidgetRule *) Group ( Forall ?customer such that And(?customer # ex1:Customer ?customer[ex1:status->"New"] ) (If Exists ?shoppingCart ?item (And(?customer[ex1:shoppingCart->?shoppingCart] ?shoppingCart[ex1:containsItem->?item] ?item # ex1:Widget ) ) Then Do( (?s ?customer[ex1:shoppingCart->?s]) (?val ?s[ex1:value->?val]) (?voucher ?customer[ex1:voucher->?voucher]) Retract(?customer[ex1:voucher->?voucher]) Retract(?voucher) Modify(?s[ex1:value->External(func:numeric-multiply(?val 0.90))])))) (* ex1:UnknownStatusRule *) Group ( Forall ?customer such that ?customer # ex1:Customer (If Not(Exists ?status (And(?customer[ex1:status->?status] External(pred:list-contains(List("New" "Bronze" "Silver" "Gold") ?status)) ))) Then Do( Execute(act:print(External(func:concat("New customer: " ?customer)))) Assert(?customer[ex1:status->"New"])))) ) ) I hope that helps someone out there :-)

Read the article

A star algorithm implementation problems

- by bryan226

I’m having some trouble implementing the A* algorithm in a 2D tile based game. The problem is basically that the algorithm gets stuck when something gets in its direct way (e.g. walls) Note that it only allows Horizontal and Vertical movement. Here's a picture as it works fine across the map without something in its direct way: (Green tile = destination, Blue = In closed list, Green = in open list) This is what happens if I try to walk 'around' a wall: I calculate costs with the F = G + H formula: G = 1 Cost per Step H = 10 Cost per Step //Count how many tiles are between current-tile & destination-tile The functions: short c_astar::GuessH(short Startx,short Starty,short Destinationx,short Destinationy) { hgeVector Start, Destination; Start.x = Startx; Start.y = Starty; Destination.x = Destinationx; Destination.y = Destinationy; short a = 0; short b = 0; if(Start.x > Destination.x) a = Start.x - Destination.x; else a = Destination.x - Start.x; if(Start.y > Destination.y) b = Start.y - Destination.y; else b = Destination.y - Start.y; return (a+b)*10; } short c_astar::GuessG(short Startx,short Starty,short Currentx,short Currenty) { hgeVector Start, Destination; Start.x = Startx; Start.y = Starty; Destination.x = Currentx; Destination.y = Currenty; short a = 0; short b = 0; if(Start.x > Destination.x) a = Start.x - Destination.x; else a = Destination.x - Start.x; if(Start.y > Destination.y) b = Start.y - Destination.y; else b = Destination.y - Start.y; return (a+b); } At the end of the loop I check which tile is the cheapest to go according to its F value: Then some quick checks are done for each tile (UP,DOWN,LEFT,RIGHT): //...CX are holding the F value of the TILE specified // Info: C0 = Center (Current) // C1 = UP // C2 = DOWN // C3 = LEFT // C4 = RIGHT //Quick checks if(((C1 < C2) && (C1 < C3) && (C1 < C4))) { Current.y -= 1; bSimilar = false; if(DEBUG) hge->System_Log("C1 < ALL"); } //.. same for C2,C3 & C4 If there are multiple tiles with the same F value: It’s actually a switch for DOWNLEFT,UPRIGHT.. etc. Here’s one of it: case UPRIGHT: { //UP Temporary = Current; Temporary.y -= 1; bTileStatus[0] = IsTileWalkable(Temporary.x,Temporary.y); if(bTileStatus[0]) { //Proceed normal we are OK & walkable Tilex.Tile = map.at(Temporary.y).at(Temporary.x); //Search in lists if(SearchInClosedList(Tilex.Tile.ID,C0)) bFoundInClosedList[0] = true; if(SearchInOpenList(Tilex.Tile.ID,C0)) bFoundInOpenList[0] = true; //RIGHT Temporary = Current; Temporary.x += 1; bTileStatus[1] = IsTileWalkable(Temporary.x,Temporary.y); if(bTileStatus[1]) { //Proceed normal we are OK & walkable Tilex.Tile = map.at(Temporary.y).at(Temporary.x); //Search in lists if(SearchInClosedList(Tilex.Tile.ID,C0)) bFoundInClosedList[1] = true; if(SearchInOpenList(Tilex.Tile.ID,C0)) bFoundInOpenList[1] = true; //************************************************* // Purpose: ClosedList behavior //************************************************* if(bFoundInClosedList[0] && !bFoundInClosedList[1]) { //UP found in ClosedList. Go RIGHT return RIGHT; } if(!bFoundInClosedList[0] && bFoundInClosedList[1]) { //RIGHT found in ClosedList. Go UP return UP; } if(bFoundInClosedList[0] && bFoundInClosedList[1]) { //Both found in ClosedList. Random value switch(hge->Random_Int(8,9)) { case 8: return UP; break; case 9: return RIGHT; break; } } //************************************************* // Purpose: OpenList behavior //************************************************* if(bFoundInOpenList[0] && !bFoundInOpenList[1]) { //UP found in OpenList. Go RIGHT return RIGHT; } if(!bFoundInOpenList[0] && bFoundInOpenList[1]) { //RIGHT found in OpenList. Go UP return UP; } if(bFoundInOpenList[0] && bFoundInOpenList[1]) { //Both found in OpenList. Random value switch(hge->Random_Int(8,9)) { case 8: return UP; break; case 9: return RIGHT; break; } } } else if(!bTileStatus[1]) { //RIGHT is not walkable OR out of range //Choose UP return UP; } } else if(!bTileStatus[0]) { //UP is not walkable OR out of range //Fast check RIGHT Temporary = Current; Temporary.x += 1; bTileStatus[1] = IsTileWalkable(Temporary.x,Temporary.y); if(bTileStatus[1]) { return RIGHT; } else return FAILED; //Failed, no valid path found! } } break; A log for the second picture: (Cut down to ten passes, because it’s just repeating itself) ----------------------------------------------------- PASS: 1 | C1: 211 | C2: 191 | C3: 211 | C4: 191 DOWN + RIGHT SIMILAR Going DOWN ----------------------------------------------------- PASS: 2 | C1: 200 | C2: 182 | C3: 202 | C4: 182 DOWN + RIGHT SIMILAR Going DOWN ----------------------------------------------------- PASS: 3 | C1: 191 | C2: 193 | C3: 193 | C4: 173 C4 < ALL Tile(12.000000,6.000000) not walkable. MAX_F_VALUE set. ----------------------------------------------------- PASS: 4 | C1: 182 | C2: 184 | C3: 182 | C4: 999 UP + LEFT SIMILAR Going UP Tile(12.000000,5.000000) not walkable. MAX_F_VALUE set. ----------------------------------------------------- PASS: 5 | C1: 191 | C2: 173 | C3: 191 | C4: 999 C2 < ALL Tile(12.000000,6.000000) not walkable. MAX_F_VALUE set. ----------------------------------------------------- PASS: 6 | C1: 182 | C2: 184 | C3: 182 | C4: 999 UP + LEFT SIMILAR Going UP Tile(12.000000,5.000000) not walkable. MAX_F_VALUE set. ----------------------------------------------------- PASS: 7 | C1: 191 | C2: 173 | C3: 191 | C4: 999 C2 < ALL Tile(12.000000,6.000000) not walkable. MAX_F_VALUE set. ----------------------------------------------------- PASS: 8 | C1: 182 | C2: 184 | C3: 182 | C4: 999 UP + LEFT SIMILAR Going LEFT ----------------------------------------------------- PASS: 9 | C1: 191 | C2: 193 | C3: 193 | C4: 173 C4 < ALL Tile(12.000000,6.000000) not walkable. MAX_F_VALUE set. ----------------------------------------------------- PASS: 10 | C1: 182 | C2: 184 | C3: 182 | C4: 999 UP + LEFT SIMILAR Going LEFT ----------------------------------------------------- Its always going after the cheapest F value, which seems to be wrong. If someone could point me to the right direction I'd be thankful. Regards, bryan226

Read the article

Probation is Over: PASS Board Year 1, Q2

- by Denise McInerney

Though it's not always official every job begins with a probation period. You start out with lots of questions and every day you find out how much more you have to learn. Usually after a few months you discover that you can actually answer some questions and have at least an idea of what you are supposed to be doing. Now at the end of my second quarter on the "job" of serving on the PASS Board I have reached that point. My probation period is over. The last three months were busy for the entire Board with the budget process, an in-person meeting and moving forward with PASS Global Growth plans. I had also set a specific goal for myself for my 2nd quarter: to see the Board to adopt a Code of Conduct for the PASS Summit. Code of Conduct When I ran for the Board I included my desire to see PASS establish a code of conduct in my campaign platform. I was motivated to do this for a few reasons. Other technical conferences have had incidents of harassment. Most of these did not have a policy in place prior to having a problem, though several conference organizers have since adopted anti-harassment policies or codes of conduct. I felt it would be in PASS' interest to establish a policy so we would be prepared should there be an incident. "This is Community" Adopting a code of conduct would reinforce our community orientation and send a message about the positive character of the Summit. PASS is a leader among technical organizations for its promotion and support of women. Adopting a code of conduct would further demonstrate our leadership in this area. After researching similar polices from other organizations I published a first draft in April. I solicited feedback from the Board, HQ staff and some PASS members. Incorporating that feedback I presented version 4 at the May Board meeting, where we had a good discussion. You can read the meeting minutes for details. I incorporated points from the Board discussion as well as feedback from a legal review to produce a final version which has been submitted to the Board. It will be discussed at the Board meeting July 12. You can read the full text at the end of this post. Virtual Chapters In the first quarter we started ramping up marketing support for the Virtual Chapters. Since then each edition of the Connector has highlighted a different VC to help get out the message about the variety of eductional opporutnities that are offered. These VC profiles will continue in the coming months. I was very pleased to welcome the new DBA Fundamentals VC which is geared toward new DBAs, people who are considering entering the field and those transitioning from a different IT role. Thanks to the contributions of Erin Stellato, Michelle Nalliah and Karla Landrum we published a "Virtual Chapter Guidebook". This document includes great advice on how to build and promote a VC. It's also a reference for how things work, from budgets to webinar hosting. I think this document will be extremely valuable to all our VC leaders and am grateful to those who put it together. Board Meeting/SQL Rally The Board met in May in Dallas. Among the items discussed were Global Growth, the budget, future events and the upcoming elections. We covered a lot of ground in two days and I will again refer you to the meeting minutes for details. The meeting schedule allowed us to participate in the SQL Rally networking events and one full day of the conference. I enjoyed having the opportunity to meet and talk with many PASS members. And my hat is off to the SQL Rally organizers who put on an outstanding event. Global Growth PASS has undertaken a major intitiative to reach and engage SQL Server professionals around the world. This Global Growth plan is ambitious and will have a significant impact on the strategic direction of the organization. We have been reaching out to the community for feedback, including hosting Twitter chats and live Town Hall meetings. I co-hosted two of these events and appreciated hearing the different perspectives of the people who participated If you have not done so I encourage you to read about the Global Growth vision and proposed governance changes and submit your feedback. FY13 Budget July 1 is the beginning of PASS' fiscal year, which makes the end of June the deadline for approving a budget. Each director submits a budget for his or her portfolio. For the Virtual Chapter portfolio I focused on how we can allocate resources to grow the VCs. Budgeting is a give-and-take process, and while I didn't get everything I asked for I'm pleased the FY13 budget includes a significant increase in financial support for the Virtual Chapters. Many people put a lot of work into the budget, but no two people deserve credit more than VP of Finance Douglas McDowell and Accounting Manager Sandy Cherry. Thanks to both of them for getting us across the goal line on time. SQL Saturday I attended SQL Saturdays in Orange Co. CA and Phoenix. It's always inspiring to see the enthusiasm in the community for learning and networking. These events are successful due to the hard work of many volunteers. Thanks to the organizers in both cities for all your efforts. Next Up This quarter we'll be gearing up plans for the VCs at the Summit and exploring ways the VCs can best support PASS' Global Growth work. I'll also be wrapping up work on the Code of Conduct and attending a Board meeting in September. And I will be at SQL Saturday #144 in Sacramento later this month. Here is the language of the Code of Conduct I have submitted to the Board for consideration: PASS Code of Conduct The PASS Summit provides database professionals from a variety of backgrounds with an opportunity to connect, share and learn. We value the strong sense of community that characterizes this event and we seek to foster an inclusive, professional atmosphere. We are dedicated to providing a harassment-free conference experience for everyone, regardless of gender, race, sexual orientation, disability, physical appearance, religion or any other protected classification. Everyone at the Summit is expected to follow the Code of Conduct. This includes but is not limited to: PASS Staff, Exhibitors, Speakers, Attendees and anyone affiliated with the event. Participants are expected to follow the Code of Conduct at all Summit events, including PASS-sponsored social events. Participant behavior Harassment includes, but is not limited to, offensive verbal comments related to gender, race, sexual orientation, disability, physical appearance, religion, or any other protected classification. Intimidation, threats, stalking, harassing photography or recording, sustained disruption of talks or other events, inappropriate physical contact and unwelcome attention will also be considered harassment. Similarly, sexual, racist, derogatory, threatening or other inappropriate language and imagery are not appropriate for any conference venue, including sessions. Recourse If a participant engages in any conduct that is prohibited under this Code of Conduct, the conference organizers may take any action they deem appropriate, including warning the offender or expelling the offender from the conference. No refunds will be granted to attendees expelled from the Summit due to violations of the Code of Conduct. If you are being harassed, witness harassment, or have any other concerns, please contact a member of conference staff immediately. Conference staff can be identified by their “Headquarters/Staff” shirts and are trained to handle the situation appropriately. A Code of Conduct Committee (CCC) made up of the Executive Manager and three members of the Board of Directors designated by the President will be authorized to take action in response to an incident or behavior that violates the Code of Conduct.

Read the article

Sorting the columns of an HTML table using JQuery

- by nikolaosk

In this post I will show you how easy is to sort the columns of an HTML table. I will use an external library,called Tablesorter which makes life so much easier for developers. ?here are other posts in my blog regarding JQuery.You can find them all here. You can find another post regarding HTML tables and JQuery here. We will demonstrate this with a step by step example. I will use Visual Studio 2012 Ultimate. You can also use Visual Studio 2012 Express Edition. You can also use VS 2010 editions. 1) Launch Visual Studio. Create an ASP.Net Empty Web application. Choose an appropriate name for your application. 2) Add a web form, default.aspx page to the application. 3) Add a table from the HTML controls tab control (from the Toolbox) on the default.aspx page 4) Now we need to download the JQuery library. Please visit the http://jquery.com/ and download the minified version.Then we need to download the Tablesorter JQuery plugin. Please donwload it, here. 5) We need to reference the JQuery library and the external JQuery Plugin. In the head section ? add the following lines. <script src="jquery-1_8_2_min.js" type="text/javascript"></script> <script src="jquery.tablesorter.js" type="text/javascript"></script>6) We need to type the HTML markup, the HTML table and its columns <body> <form id="form1" runat="server"> <div> <h1>Liverpool Legends</h1> <table style="width: 50%;" border="1" cellpadding="10" cellspacing ="10" class="liverpool"> <thead> <tr><th>Defenders</th><th>MidFielders</th><th>Strikers</th></tr> </thead> <tbody> <tr> <td>Alan Hansen</td> <td>Graeme Souness</td> <td>Ian Rush</td> </tr> <tr> <td>Alan Kennedy</td> <td>Steven Gerrard</td> <td>Michael Owen</td> </tr> <tr> <td>Jamie Garragher</td> <td>Kenny Dalglish</td> <td>Robbie Fowler</td> </tr> <tr> <td>Rob Jones</td> <td>Xabi Alonso</td> <td>Dirk Kuyt</td> </tr> </tbody> </table> </div> </form></body> 7) Inside the head section we also write the simple JQuery code. <script type="text/javascript"> $(document).ready(function() { $('.liverpool').tablesorter(); }); </script> 8) Run your application.This is how the HTML table looks before the table is sorted on the basis of the selected column. 9) Now I will click on the Midfielders header.Have a look at the picture below Tablesorter is an excellent JQuery plugin that makes sorting HTML tables a piece of cake. Hope it helps!!!

Read the article

Community Outreach - Where Should I Go

- by Roger Brinkley

A few days ago I was talking to person new to community development and they asked me what guidelines I used to determine the worthiness of a particular event. After our conversation was over I thought about it a little bit more and figured out there are three ways to determine if any event (be it conference, blog, podcast or other social medias) is worth doing: Transferability, Multiplication, and Impact. Transferability - Is what I have to say useful to the people that are going to hear it. For instance, consider a company that has product offering that can connect up using a number of languages like Scala, Grovey or Java. Sending a Scala expert to talk about Scala and the product is not transferable to a Java User Group, but a Java expert doing the same talk with a Java slant is. Similarly, talking about JavaFX to any Java User Group meeting in Brazil was pretty much a wasted effort until it was open sourced. Once it was open sourced it was well received. You can also look at transferability in relation to the subject matter that you're dealing with. How transferable is a presentation that I create. Can I, or a technical writer on the staff, turn it into some technical document. Could it be converted into some type of screen cast. If we have a regular podcast can we make a reference to the document, catch the high points or turn it into a interview. Is there a way of using this in the sales group. In other words is the document purely one dimensional or can it be re-purposed in other forms. Multiplication - On every trip I'm looking for 2 to 5 solid connections that I can make with developers. These are long term connections, because I know that once that relationship is established it will lead to another 2 - 5 from that connection and within a couple of years were talking about some 100 connections from just one developer. For instance, when I was working on JavaHelp in 2000 I hired a science teacher with a programming background. We've developed a very tight relationship over the year though we rarely see each other more than once a year. But at this JavaOne, one of his employees came up to me and said, "Richard (Rick Hard in Czech) told me to tell you that he couldn't make it to JavaOne this year but if I saw you to tell you hi". Another example is from my Mobile & Embedded days in Brasil. On our very first FISL trip about 5 years ago there were two university students that had created a project called "Marge". Marge was a Bluetooth framework that made connecting bluetooth devices easier. I invited them to a "Sun" dinner that evening. Originally they were planning on leaving that afternoon, but they changed their plans recognizing the opportunity. Their eyes were as big a saucers when they realized the level of engineers at the meeting. They went home started a JUG in Florianoplis that we've visited more than a couple of times. One of them went to work for Brazilian government lab like Berkley Labs, MIT Lab, John Hopkins Applied Physicas Labs or Lincoln Labs in the US. That presented us with an opportunity to show Embedded Java as a possibility for some of the work they were doing there. Impact - The final criteria is how life changing is what I'm going to say be to the individuals I'm reaching. A t-shirt is just a token, but when I reach down and tug at their developer hearts then I know I've succeeded. I'll never forget one time we flew all night to reach Joan Pasoa in Northern Brazil. We arrived at 2am went immediately to our hotel only to be woken up at 6 am to travel 2 hours by car to the presentation hall. When we arrived we were totally exhausted. Outside the facility there were 500 people lined up to hear 6 speakers for the day. That itself was uplifting. I delivered one of my favorite talks on "I have passion". It was a talk on golf and embedded java development, "Find your passion". When we finished a couple of first year students came up to me and said how much my talk had inspired them. FISL is another great example. I had been about 4 years in a row. FISL is a very young group of developers so capturing their attention is important. Several of the students will come back 2 or 3 years later and ask me questions about research or jobs. And then there's Louis. Louis is one my favorite Brazilians. I can only describe him as a big Brazilian teddy bear. I see him every year at FISL. He works primarily in Java EE but he's attended every single one of my talks over the last 4 years. I can't tell you why, but he always greets me and gives me a hug. For some reason I've had a real impact. And of course when it comes to impact you don't just measure a presentation but every single interaction you have at an event. It's the hall way conversations, the booth conversations, but more importantly it's the conversations at dinner tables or in the cars when you're getting transported to an event. There's a good story that illustrates this. Last year in the spring I was traveling to Goiânia in Brazil. I've been there many times and leaders there no me well. One young man has picked me up at the airport on more than one occasion. We were going out to dinner one evening and he brought his girl friend along. One thing let to another and I eventually asked him, in front of her, "Why haven't you asked her to marry you?" There were all kinds of excuses and she just looked at him and smiled. When I came back in December for JavaOne he came and sought me. "I just want to tell you that I thought a lot about what you said, and I asked her to marry me. We're getting married next Spring." Sometimes just one presentation is all it takes to make an impact. Other times it takes years. Some impacts are directly related to the company and some are more personal in nature. It doesn't matter which it is because it's having the impact that matters.

Read the article

Unlocking Productivity

- by Michael Snow

Unlocking Productivity in Life Sciences with Consolidated Content Management by Joe Golemba, Vice President, Product Management, Oracle WebCenter As life sciences organizations look to become more operationally efficient, the ability to effectively leverage information is a competitive advantage. Whether data mining at the drug discovery phase or prepping the sales team before a product launch, content management can play a key role in developing, organizing, and disseminating vital information. The goal of content management is relatively straightforward: put the information that people need where they can find it. A number of issues can complicate this; information sits in many different systems, each of those systems has its own security, and the information in those systems exists in many different formats. Identifying and extracting pertinent information from mountains of farflung data is no simple job, but the alternative—wasted effort or even regulatory compliance issues—is worse. An integrated information architecture can enable health sciences organizations to make better decisions, accelerate clinical operations, and be more competitive. Unstructured data matters Often when we think of drug development data, we think of structured data that fits neatly into one or more research databases. But structured data is often directly supported by unstructured data such as experimental protocols, reaction conditions, lot numbers, run times, analyses, and research notes. As life sciences companies seek integrated views of data, they are typically finding diverse islands of data that seemingly have no relationship to other data in the organization. Information like sales reports or call center reports can be locked into siloed systems, and unavailable to the discovery process. Additionally, in the increasingly networked clinical environment, Web pages, instant messages, videos, scientific imaging, sales and marketing data, collaborative workspaces, and predictive modeling data are likely to be present within an organization, and each source potentially possesses information that can help to better inform specific efforts. Historically, content management solutions that had 21CFR Part 11 capabilities—electronic records and signatures—were focused mainly on content-enabling manufacturing-related processes. Today, life sciences companies have many standalone repositories, requiring different skills, service level agreements, and vendor support costs to manage them. With the amount of content doubling every three to six months, companies have recognized the need to manage unstructured content from the beginning, in order to increase employee productivity and operational efficiency. Using scalable and secure enterprise content management (ECM) solutions, organizations can better manage their unstructured content. These solutions can also be integrated with enterprise resource planning (ERP) systems or research systems, making content available immediately, in the context of the application and within the flow of the employee’s typical business activity. Administrative safeguards—such as content de-duplication—can also be applied within ECM systems, so documents are never recreated, eliminating redundant efforts, ensuring one source of truth, and maintaining content standards in the organization. Putting it in context Consolidating structured and unstructured information in a single system can greatly simplify access to relevant information when it is needed through contextual search. Using contextual filters, results can include therapeutic area, position in the value chain, semantic commonalities, technology-specific factors, specific researchers involved, or potential business impact. The use of taxonomies is essential to organizing information and enabling contextual searches. Taxonomy solutions are composed of a hierarchical tree that defines the relationship between different life science terms. When overlaid with additional indexing related to research and/or business processes, it becomes possible to effectively narrow down the amount of data that is returned during searches, as well as prioritize results based on specific criteria and/or prior search history. Thus, search results are more accurate and relevant to an employee’s day-to-day work. For example, a search for the word "tissue" by a lab researcher would return significantly different results than a search for the same word performed by someone in procurement. Of course, diverse data repositories, combined with the immense amounts of data present in an organization, necessitate that the data elements be regularly indexed and cached beforehand to enable reasonable search response times. In its simplest form, indexing of a single, consolidated data warehouse can be expected to be a relatively straightforward effort. However, organizations require the ability to index multiple data repositories, enabling a single search to reference multiple data sources and provide an integrated results listing. Security and compliance Beyond yielding efficiencies and supporting new insight, an enterprise search environment can support important security considerations as well as compliance initiatives. For example, the systems enable organizations to retain the relevance and the security of the indexed systems, so users can only see the results to which they are granted access. This is especially important as life sciences companies are working in an increasingly networked environment and need to provide secure, role-based access to information across multiple partners. Although not officially required by the 21 CFR Part 11 regulation, the U.S. Food and Drug Administraiton has begun to extend the type of content considered when performing relevant audits and discoveries. Having an ECM infrastructure that provides centralized management of all content enterprise-wide—with the ability to consistently apply records and retention policies along with the appropriate controls, validations, audit trails, and electronic signatures—is becoming increasingly critical for life sciences companies. Making the move Creating an enterprise-wide ECM environment requires moving large amounts of content into a single enterprise repository, a daunting and risk-laden initiative. The first key is to focus on data taxonomy, allowing content to be mapped across systems. The second is to take advantage new tools which can dramatically speed and reduce the cost of the data migration process through automation. Additional content need not be frozen while it is migrated, enabling productivity throughout the process. The ability to effectively leverage information into success has been gaining importance in the life sciences industry for years. The rapid adoption of enterprise content management, both in operational processes as well as in scientific management, are clear indicators that the companies are looking to use all available data to be better informed, improve decision making, minimize risk, and increase time to market, to maintain profitability and be more competitive. As more and more varieties and sources of information are brought under the strategic management umbrella, the ability to divine knowledge from the vast pool of information is increasingly difficult. Simple search engines and basic content management are increasingly unable to effectively extract the right information from the mountains of data available. By bringing these tools into context and integrating them with business processes and applications, we can effectively focus on the right decisions that make our organizations more profitable. More Information Oracle will be exhibiting at DIA 2012 in Philadelphia on June 25-27. Stop by our booth Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} (#2825) to learn more about the advantages of a centralized ECM strategy and see the Oracle WebCenter Content solution, our 21 CFR Part 11 compliant content management platform.

Read the article

Corsair Hackers Reboot

It wasn't easy for me to attend but it was absolutely worth to go. The Linux User Group of Mauritius (LUGM) organised another get-together for any open source enthusiast here on the island. Strangely named "Corsair Hackers Reboot" but it stands for a positive cause: "Corsair Hackers Reboot Event A collaborative activity involving LUGM, UoM Computer Club, Fortune Way Shopping Mall and several geeks from around the island, striving to put FOSS into homes & offices. The public is invited to discover and explore Free Software & Open Source." And it was a good opportunity for me and the kids to visit the east coast of Mauritius, too. Perfect timing It couldn't have been better... Why? Well, for two important reasons (in terms of IT): End of support for Microsoft Windows XP - 08.04.2014 Release of Ubuntu 14.04 Long Term Support - 17.04.2014 Quite funnily, those two IT dates weren't the initial reasons and only during the weeks of preparations we put those together. And therefore it was even more positive to promote the use of Linux and open source software in general to a broader audience. Getting there ... Thanks to the new motor way M3 and all the additional road work which has been completed recently it was very simple to get across the island in a very quick and relaxed manner. Compared to my trips in the early days of living in Mauritius (and riding on a scooter) it was very smooth and within less than an hour we hit Centrale de Flacq. Well, being in the city doesn't necessarily mean that one has arrived at the destination. But thanks to modern technology I had a quick look on Google Maps, and we finally managed to get a parking behind the huge bus terminal in Flacq. From there it was just a short walk to Fortune Way. The children were trying to count the number of buses... Well, lots and lots of buses - really impressive actually. What was presented? There were different areas set up. Right at the entrance one's attention was directly drawn towards the elevated hacker's stage. Similar to rock stars performing their gig there was bunch of computers, laptops and networking equipment in order to cater the right working conditions for coding/programming challenge(s) on the one hand and for the pen-testing or system hacking competition on the other hand. Personally, I was very impresses that actually Nitin took care of the pen-testing competition. He hardly started one year back with Linux in general, and Kali Linux specifically. Seeing his personal development from absolute newbie to a decent Linux system administrator within such a short period of time, is really impressive. His passion to open source software made him a living. Next, clock-wise seen, was the Kid's Corner with face-painting as the main attraction. Additionally, there were numerous paper print outs to colour. Plus a decent workstation with the educational suite GCompris. Of course, my little ones were into that. They already know GCompris since a while as they are allowed to use it on an IGEL thin client terminal here at home. To simplify my life, I set up GCompris as full-screen guest session on the server, and they can pass the login screen without any further obstacles. And because it's a thin client hooked up to a XDMCP remote session I don't have to worry about the hardware on their desk, too. The next section was the main attraction of the event: BYOD - Bring Your Own Device Well, compared to the usual context of BYOD the corsairs had a completely different intention. Here, you could bring your own laptop and a team of knowledgeable experts - read: geeks and so on - offered to fully convert your system on any Linux distribution of your choice. And even though I came later, I was told that the USB pen drives had been in permanent use. From being prepared via dd command over launching LiveCD session to finally installing a fresh Linux system on bare metal. Most interestingly, I did a similar job already a couple of months ago, while upgrading an existing Windows XP system to Xubuntu 13.10. So far, the female owner is very happy and enjoys her system almost every evening to go shopping online, checking mails, and reading latest news from the Anime world. Back to the Hackers event, Ish told me that they managed approximately 20 conversion during the day. Furthermore, Ajay and others gladly assisted some visitors with some tricky issues and by the end of the day you can call is a success. While I was around, there was a elderly male visitor that got a full-fledged system conversion to a Linux system running completely in French language. A little bit more to the centre it was Yasir's turn to demonstrate his Arduino hardware that he hooked up with an experimental electrical circuit board connected to an LCD matrix display. That's the real spirit of hacking, and he showed some minor adjustments on the fly while demo'ing the system. Also, very interesting there was a thermal sensor around. Personally, I think that platforms like the Arduino as well as the Raspberry Pi have a great potential at a very affordable price in order to bring a better understanding of electronics as well as computer programming to a broader audience. It would be great to see more of those experiments during future activities. And last but not least there were a small number of vendors. Amongst them was Emtel - once again as sponsor of the general internet connectivity - and another hardware supplier from Riche Terre shopping mall. They had a good collection of Android related gimmicks, like a autonomous web cam that can convert any TV with HDMI connector into an online video chat system given WiFi. It's actually kind of awesome to have a Skype or Google hangout video session on the big screen rather than on the laptop. Some pictures of the event LUGM: Great conversations on Linux, open source and free software during the Corsair Hackers Reboot LUGM: Educational workstation running GCompris suite attracted the youngest attendees of the day. Of course, face painting had to be done prior to hacking... LUGM: Nadim demoing some Linux specifics to interested visitors. Everyone was pretty busy during the whole day LUGM: The hacking competition, here pen-testing a wireless connection and access point between multiple machines LUGM: Well prepared workstations to be able to 'upgrade' visitors' machines to any Linux operating system Final thoughts Gratefully, during the preparations of the event I was invited to leave some comments or suggestions, and the team of the LUGM did a great job. The outdoor banner was a eye-catcher, the various flyers and posters for the event were clearly written and as far as I understood from the quick chats I had with Ish, Nadim, Nitin, Ajay, and of course others all were very happy about the event execution. Great job, LUGM! And I'm already looking forward to the next Corsair Hackers Reboot event ... Crossing fingers: Very soon and hopefully this year again :) Update: In the media The event had been announced in local media, too. L'Express: Salon informatique: Hacking Challenge à Flacq

Read the article

Combining Shared Secret and Username Token – Azure Service Bus

- by Michael Stephenson

As discussed in the introduction article this walkthrough will explain how you can implement WCF security with the Windows Azure Service Bus to ensure that you can protect your endpoint in the cloud with a shared secret but also flow through a username token so that in your listening WCF service you will be able to identify who sent the message. This could either be in the form of an application or a user depending on how you want to use your token. Prerequisites Before going into the walk through I want to explain a few assumptions about the scenario we are implementing but to keep the article shorter I am not going to walk through all of the steps in how to setup some of this. In the solution we have a simple console application which will represent the client application. There is also the services WCF application which contains the WCF service we will expose via the Windows Azure Service Bus. The WCF Service application in this example was hosted in IIS 7 on Windows 2008 R2 with AppFabric Server installed and configured to auto-start the WCF listening services. I am not going to go through significant detail around the IIS setup because it should not matter in relation to this article however if you want to understand more about how to configure WCF and IIS for such a scenario please refer to the following paper which goes into a lot of detail about how to configure this. The link is: http://tinyurl.com/8s5nwrz The Service Component To begin with let's look at the service component and how it can be configured to listen to the service bus using a shared secret but to also accept a username token from the client. In the sample the service component is called Acme.Azure.ServiceBus.Poc.UN.Services. It has a single service which is the Visual Studio template for a WCF service when you add a new WCF Service Application so we have a service called Service1 with its Echo method. Nothing special so far!.... The next step is to look at the web.config file to see how we have configured the WCF service. In the services section of the WCF configuration you can see I have created my service and I have created a local endpoint which I simply used to do a little bit of diagnostics and to check it was working, but more importantly there is the Windows Azure endpoint which is using the ws2007HttpRelayBinding (note that this should also work just the same if your using netTcpRelayBinding). The key points to note on the above picture are the service behavior called MyServiceBehaviour and the service bus endpoints behavior called MyEndpointBehaviour. We will go into these in more detail later. The Relay Binding The relay binding for the service has been configured to use the TransportWithMessageCredential security mode. This is the important bit where the transport security really relates to the interaction between the service and listening to the Azure Service Bus and the message credential is where we will use our username token like we have specified in the message/clientCrentialType attribute. Note also that we have left the relayClientAuthenticationType set to RelayAccessToken. This means that authentication will be made against ACS for accessing the service bus and messages will not be accepted from any sender who has not been authenticated by ACS. The Endpoint Behaviour In the below picture you can see the endpoint behavior which is configured to use the shared secret client credential for accessing the service bus and also for diagnostic purposes I have included the service registry element. Hopefully if you are familiar with using Windows Azure Service Bus relay feature the above is very familiar to you and this is a very common setup for this section. There is nothing specific to the username token implementation here. The Service Behaviour Now we come to the bit with most of the username token bits in it. When you configure the service behavior I have included the serviceCredentials element and then setup to use userNameAuthentication and you can see that I have created my own custom username token validator. This setup means that WCF will hand off to my class for validating the username token details. I have also added the serviceSecurityAudit element to give me a simple auditing of access capability. My UsernamePassword Validator The below picture shows you the details of the username password validator class I have implemented. WCF will hand off to this class when validating the token and give me a nice way to check the token credentials against an on-premise store. You have all of the validation features with a non-service bus WCF implementation available such as validating the username password against active directory or ASP.net membership features or as in my case above something much simpler. The Client Now let's take a look at the client side of this solution and how we can configure the client to authenticate against ACS but also send a username token over to the service component so it can implement additional security checks on-premise. I have a console application and in the program class I want to use the proxy generated with Add Service Reference to send a message via the Azure Service Bus. You can see in my WCF client configuration below I have setup my details for the azure service bus url and am using the ws2007HttpRelayBinding. Next is my configuration for the relay binding. You can see below I have configured security to use TransportWithMessageCredential so we will flow the username token with the message and also the RelayAccessToken relayClientAuthenticationType which means the component will validate against ACS before being allowed to access the relay endpoint to send a message. After the binding we need to configure the endpoint behavior like in the below picture. This is the normal configuration to use a shared secret for accessing a Service Bus endpoint. Finally below we have the code of the client in the console application which will call the service bus. You can see that we have created our proxy and then made a normal call to a WCF service but this time we have also set the ClientCredentials to use the appropriate username and password which will be flown through the service bus and to our service which will validate them. Conclusion As you can see from the above walkthrough it is not too difficult to configure a service to use both a shared secret and username token at the same time. This gives you the power and protection offered by the access control service in the cloud but also the ability to flow additional tokens to the on-premise component for additional security features to be implemented. Sample The sample used in this post is available at the following location: https://s3.amazonaws.com/CSCBlogSamples/Acme.Azure.ServiceBus.Poc.UN.zip

Read the article

CodePlex Daily Summary for Thursday, September 06, 2012

CodePlex Daily Summary for Thursday, September 06, 2012Popular Releasesmenu4web: menu4web 0.4.1 - javascript menu for web sites: This release is for those who believe that global variables are evil. menu4web has been wrapped into m4w singleton object. Added "Vertical Tabs" example which illustrates object notation.WinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.1: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...iPDC - Free Phasor Data Concentrator: iPDC-v1.3.1: iPDC suite version-1.3.1, Modifications and Bug Fixed (from v 1.3.0) New User Manual for iPDC-v1.3.1 available on websites. Bug resolved : PMU Simulator TCP connection error and hang connection for client (PDC). Now PMU Simulator (server) can communicate more than one PDCs (clients) over TCP and UDP parallely. PMU Simulator is now sending the exact data frames as mentioned in data rate by user. PMU Simulator data rate has been verified by iPDC database entries and PMU Connection Tes...Microsoft SQL Server Product Samples: Database: AdventureWorks OData Feed: The AdventureWorks OData service exposes resources based on specific SQL views. The SQL views are a limited subset of the AdventureWorks database that results in several consuming scenarios: CompanySales Documents ManufacturingInstructions ProductCatalog TerritorySalesDrilldown WorkOrderRouting How to install the sample You can consume the AdventureWorks OData feed from http://services.odata.org/AdventureWorksV3/AdventureWorks.svc. You can also consume the AdventureWorks OData fe...Desktop Google Reader: 1.4.6: Sorting feeds alphabetical is now optional (see preferences window)DotNetNuke® Community Edition CMS: 06.02.03: Major Highlights Fixed issue where mailto: links were not working when sending bulk email Fixed issue where uses did not see friendship relationships Problem is in 6.2, which does not show in the Versions Affected list above. Fixed the issue with cascade deletes in comments in CoreMessaging_Notification Fixed UI issue when using a date fields as a required profile property during user registration Fixed error when running the product in debug mode Fixed visibility issue when...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.65: Fixed null-reference error in the build task constructor.Active Forums for DotNetNuke CMS: Active Forums 5.0.0 RC: RC release of Active Forums 5.0.Droid Explorer: Droid Explorer 0.8.8.7 Beta: Bug in the display icon for apk's, will fix with next release Added fallback icon if unable to get the image/icon from the Cloud Service Removed some stale plugins that were either out dated or incomplete. Added handler for *.ab files for restoring backups Added plugin to create device backups Backups stored in %USERPROFILE%\Android Backups\%DEVICE_ID%\ Added custom folder icon for the android backups directory better error handling for installing an apk bug fixes for the Runn...BI System Monitor: v2.1: Data Audits report and supporting SQL, and SSIS package Environment Overview report enhancements, improving the appearance, addition of data audit finding indicators Note: SQL 2012 version coming soon.Hidden Capture (HC): Hidden Capture 1.1: Hidden Capture 1.1 by Mohsen E.Dawatgar http://Hidden-Capture.blogfa.comExt Spec: Ext Spec 0.2.1: Refined examples and improved distribution options.The Visual Guide for Building Team Foundation Server 2012 Environments: Version 1: --Nearforums - ASP.NET MVC forum engine: Nearforums v8.5: Version 8.5 of Nearforums, the ASP.NET MVC Forum Engine. New features include: Built-in search engine using Lucene.NET Flood control improvements Notifications improvements: sync option and mail body View Roadmap for more details webdeploy package sha1 checksum: 961aff884a9187b6e8a86d68913cdd31f8deaf83WiX Toolset: WiX Toolset v3.6: WiX Toolset v3.6 introduces the Burn bootstrapper/chaining engine and support for Visual Studio 2012 and .NET Framework 4.5. Other minor functionality includes: WixDependencyExtension supports dependency checking among MSI packages. WixFirewallExtension supports more features of Windows Firewall. WixTagExtension supports Software Id Tagging. WixUtilExtension now supports recursive directory deletion. Melt simplifies pure-WiX patching by extracting .msi package content and updating .w...Iveely Search Engine: Iveely Search Engine （0.2.0）: ????ISE?0.1.0??，?????，ISE?0.2.0?????????，???????，????????20???follow?ISE，????，??ISE??????????，??????????，?????????，?????????0.2.0??????，??????????。 Iveely Search Engine ?0.2.0?????????“??????????”，??????，?????????，???????，???????????????????，????、????????????。???0.1.0????????????： 1. ??“????” ??。??????????，?????????，???????????????????。??：????????，????????????，??????????????????。??????。 2. ??“????”??。?0.1.0??????，???????，???????????????，?????????????，????????，?0.2.0?，???????...GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.DotNetNuke® Form and List: 06.00.04: DotNetNuke Form and List 06.00.04 Don't forget to backup your installation before upgrade. Changes in 06.00.04 Fix: Sql Scripts for 6.003 missed object qualifiers within stored procedures Fix: added missing resource "cmdCancel.Text" in form.ascx.resx Changes in 06.00.03 Fix: MakeThumbnail was broken if the application pool was configured to .Net 4 Change: Data is now stored in nvarchar(max) instead of ntext Changes in 06.00.02 The scripts are now compatible with SQL Azure, tested in a ne...Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.New ProjectsAny-Service: AnyService is a .net 4.0 Windows service shell. It hosts any windows application in non-gui mode to run as a service.BabyCloudDrives - the multi cloud drive desktop's application: wpf ????BLACK ORANGE: Download The HPAD TEXT EDITOR and use it Wisely.. CodePlex New Release Checker: CodePlex New Release Checker is a small library that makes it easy to add, "New Version Available!" functionality to your CodePlex project.Collect: ????????！CSVManager: CSV??CSV?????，????CSV??，??????Exam Project: My Exam Project. Computer Vision, C and OpenCV-FTP: Hey guys thanks for checking out my ftp!Haushaltsbuch: 1ModMaker.Lua: ModMaker.Lua is an open source .NET library that parses and executes Lua code.MyJabbr: MyJabbr netduinoscope: Design shield and software to use netduino as oscilloscopeNetSurveillance Web Application: Net Surveillance Web ApplicationNiconicoApiHelper: ????API?????????OStega: A simple library for encrypt text into an bmp or png image.OURORM: ormTFS Cloud Deployment Toolkit: The TFS Cloud Deployment Toolkit is a set of tools that integrate with TFS 2010 to help manage configuration and deployment to various remote environments.The Visual Guide for Building Team Foundation Server 2012 Environments: A step-by-step guide for building Team Foundation Server 2012 environments that include SharePoint Server 2010, SQL Server 2012, Windows Server 2012 and more!WinRT LineChart: An attempt at creating an usable LineChart for everyone to use in his/her own Windows 8 Apps

Read the article

General Purpose ASP.NET Data Source Control

- by Ricardo Peres

OK, you already know about the ObjectDataSource control, so what’s wrong with it? Well, for once, it doesn’t pass any context to the SelectMethod, you only get the parameters supplied on the SelectParameters plus the desired ordering, starting page and maximum number of rows to display. Also, you must have two separate methods, one for actually retrieving the data, and the other for getting the total number of records (SelectCountMethod). Finally, you don’t get a chance to alter the supplied data before you bind it to the target control. I wanted something simple to use, and more similar to ASP.NET 4.5, where you can have the select method on the page itself, so I came up with CustomDataSource. Here’s how to use it (I chose a GridView, but it works equally well with any regular data-bound control): 1: <web:CustomDataSourceControl runat="server" ID="datasource" PageSize="10" OnData="OnData" /> 2: <asp:GridView runat="server" ID="grid" DataSourceID="datasource" DataKeyNames="Id" PageSize="10" AllowPaging="true" AllowSorting="true" /> The OnData event handler receives a DataEventArgs instance, which contains some properties that describe the desired paging location and size, and it’s where you return the data plus the total record count. Here’s a quick example: 1: protected void OnData(object sender, DataEventArgs e) 2: { 3: //just return some data 4: var data = Enumerable.Range(e.StartRowIndex, e.PageSize).Select(x => new { Id = x, Value = x.ToString(), IsPair = ((x % 2) == 0) }); 5: e.Data = data; 6: //the total number of records 7: e.TotalRowCount = 100; 8: } Here’s the code for the DataEventArgs: 1: [Serializable] 2: public class DataEventArgs : EventArgs 3: { 4: public DataEventArgs(Int32 pageSize, Int32 startRowIndex, String sortExpression, IOrderedDictionary parameters) 5: { 6: this.PageSize = pageSize; 7: this.StartRowIndex = startRowIndex; 8: this.SortExpression = sortExpression; 9: this.Parameters = parameters; 10: } 11: 12: public IEnumerable Data 13: { 14: get; 15: set; 16: } 17: 18: public IOrderedDictionary Parameters 19: { 20: get; 21: private set; 22: } 23: 24: public String SortExpression 25: { 26: get; 27: private set; 28: } 29: 30: public Int32 StartRowIndex 31: { 32: get; 33: private set; 34: } 35: 36: public Int32 PageSize 37: { 38: get; 39: private set; 40: } 41: 42: public Int32 TotalRowCount 43: { 44: get; 45: set; 46: } 47: } As you can guess, the StartRowIndex and PageSize receive the starting row and the desired page size, where the page size comes from the PageSize property on the markup. There’s also a SortExpression, which gets passed the sorted-by column and direction (if descending) and a dictionary containing all the values coming from the SelectParameters collection, if any. All of these are read only, and it is your responsibility to fill in the Data and TotalRowCount. The code for the CustomDataSource is very simple: 1: [NonVisualControl] 2: public class CustomDataSourceControl : DataSourceControl 3: { 4: public CustomDataSourceControl() 5: { 6: this.SelectParameters = new ParameterCollection(); 7: } 8: 9: protected override DataSourceView GetView(String viewName) 10: { 11: return (new CustomDataSourceView(this, viewName)); 12: } 13: 14: internal void GetData(DataEventArgs args) 15: { 16: this.OnData(args); 17: } 18: 19: protected virtual void OnData(DataEventArgs args) 20: { 21: EventHandler<DataEventArgs> data = this.Data; 22: 23: if (data != null) 24: { 25: data(this, args); 26: } 27: } 28: 29: [Browsable(false)] 30: [DesignerSerializationVisibility(DesignerSerializationVisibility.Visible)] 31: [PersistenceMode(PersistenceMode.InnerProperty)] 32: public ParameterCollection SelectParameters 33: { 34: get; 35: private set; 36: } 37: 38: public event EventHandler<DataEventArgs> Data; 39: 40: public Int32 PageSize 41: { 42: get; 43: set; 44: } 45: } Also, the code for the accompanying internal – as there is no need to use it from outside of its declaring assembly - data source view: 1: sealed class CustomDataSourceView : DataSourceView 2: { 3: private readonly CustomDataSourceControl dataSourceControl = null; 4: 5: public CustomDataSourceView(CustomDataSourceControl dataSourceControl, String viewName) : base(dataSourceControl, viewName) 6: { 7: this.dataSourceControl = dataSourceControl; 8: } 9: 10: public override Boolean CanPage 11: { 12: get 13: { 14: return (true); 15: } 16: } 17: 18: public override Boolean CanRetrieveTotalRowCount 19: { 20: get 21: { 22: return (true); 23: } 24: } 25: 26: public override Boolean CanSort 27: { 28: get 29: { 30: return (true); 31: } 32: } 33: 34: protected override IEnumerable ExecuteSelect(DataSourceSelectArguments arguments) 35: { 36: IOrderedDictionary parameters = this.dataSourceControl.SelectParameters.GetValues(HttpContext.Current, this.dataSourceControl); 37: DataEventArgs args = new DataEventArgs(this.dataSourceControl.PageSize, arguments.StartRowIndex, arguments.SortExpression, parameters); 38: 39: this.dataSourceControl.GetData(args); 40: 41: arguments.TotalRowCount = args.TotalRowCount; 42: arguments.MaximumRows = this.dataSourceControl.PageSize; 43: arguments.AddSupportedCapabilities(DataSourceCapabilities.Page | DataSourceCapabilities.Sort | DataSourceCapabilities.RetrieveTotalRowCount); 44: arguments.RetrieveTotalRowCount = true; 45: 46: if (!(args.Data is ICollection)) 47: { 48: return (args.Data.OfType<Object>().ToList()); 49: } 50: else 51: { 52: return (args.Data); 53: } 54: } 55: } As always, looking forward to hearing from you!

Read the article

Why people don't patch and upgrade?!?

- by Mike Dietrich

Discussing the topic "Why Upgrade" or "Why not Upgrade" is not always fun. Actually the arguments repeat from customer to customer. Typically we hear things such as: A PSU or Patch Set introduces new bugs A new PSU or Patch Set introduces new features which lead to risk and require application verification Patching means risk Patching changes the execution plans Patching requires too much testing Patching is too much work for our DBAs Patching costs a lot of money and doesn't pay out And to be very honest sometimes it's hard for me to stay calm in such discussions. Let's discuss some of these points a bit more in detail. A PSU or Patch Set introduces new bugsWell, yes, that is true as no software containing more than some lines of code is bug free. This applies to Oracle's code as well as too any application or operating system code. But first of all, does that mean you never patch your OS because the patch may introduce new flaws? And second, what is the point of saying "it introduces new bugs"? Does that mean you will never get rid of the mean issues we know about and we fixed already? Scroll down from MOS Note:161818.1 to the patch release you are on, no matter if it's 10.2.0.4 or 11.2.0.3 and check for the Known Issues And Alerts.Will you take responsibility to know about all these issues and refuse to upgrade to 11.2.0.4? I won't. A new PSU or Patch Set introduces new featuresOk, we can discuss that. Offering new functionality within a database patch set is a dubious thing. It has advantages such as in 11.2.0.4 where we backported Database Redaction to. But this is something you will only use once you have an Advanced Security license. I interpret that statement I've heard quite often from customers in a different way: People don't want to get surprises such as new behaviour. This certainly gives everybody a hard time. And we've had many examples in the past (SESSION_CACHED_CURSROS in 10.2.0.4, _DATAFILE_WRITE_ERRORS_CRASH_INSTANCE in 11.2.0.2 and others) where those things weren't documented, not even in the README. Thanks to many friends out there I learned about those as well. So new behaviour is the topic people consider as risky - not really new features. And just to point this out: A PSU never brings in new features or new behaviour by definition! Patching means riskDoes it really mean risk? Yes, there were issues in the past (and sometimes in the present as well) where a patch didn't get installed correctly. But personally I consider it way more risky to not patch. Keep that in mind: The day Oracle publishes an PSU (or CPU) containing security fixes all the great security experts out there go public with their findings as well. So from that day on even my grandma can find out about those issues and try to attack somebody. Now a lot of people say: "My database does not face the internet." And I will answer: "The enemy is sitting already behind your firewalls. And knows potentially about these things." My statement: Not patching introduces way more risk to your environment than patching. Seriously! Patching changes the execution plansDo they really? I agree - there's a very small risk for this happening with Patch Sets. But not with PSUs or CPUs as they contain no optimizer fixes changing behaviour (but they may contain fixes curing wrong-query-result-bugs). But what's the point of a changing execution plan? In Oracle Database 11g it is so simple to be prepared. SQL Plan Management is a free EE feature - so once that occurs you'll put the plan into the Plan Baseline. Basta! Yes, you wouldn't like to get such surprises? Than please use the SQL Performance Analyzer (SPA) from Real Application Testing and you'll detect that easily upfront in minutes. And not to forget this, a plan change can also be very positive!Yes, there's a little risk with a database patchset - and we have many possibilites to detect this before patching. Patching requires too much testingWell, does it really? I have seen in the past 12 years how people test. There are very different efforts and approaches on this. I have seen people spending a hell of money on licenses or on project team staffing. And I have seen people sailing blindly without any tests just going the John-Wayne-approach.Proper tools will allow you to test easily without too much efforts. See the paragraph above. We have used Real Application Testing in so many customer projects reducing the amount of work spend on testing by over 50%. But apart from that at some point you will have to stop testing. If you don't you'll get lost and you'll burn money. There's no 100% guaranty. You will have to deal with a little risk as reaching the final 5% of certainty will cost you the same as it did cost to reach 95%. And doing this will lead to abnormal long product cycles that you'll run behind forever. And this will cost even more money. Patching is too much work for our DBAsPatching is a lot of work. I agree. And it's no fun work. It's boring, annoying. You don't learn much from that. That's why you should try to automate this task. Use the Database's Lifecycle Management Pack. And don't cry about the fact that it costs money. Yes it does. But it will ease the process and you'll save a lot of costs as you don't waste your valuable time with patching. Or use Oracle Database 12c Oracle Multitenant and patch either by unplug/plug or patch an entire container database with all PDBs with one patch in one task. We have customer reference cases proofing it saved them 75% of time, effort and cost since they've used Lifecycle Management Pack. So why don't you use it? Patching costs a lot of money and doesn't pay outWell, see my statements in the paragraph above. And it pays out as flying with a database with 100 known critical flaws in it which are already fixed by Oracle (such as in the Oct 2013 PSU for Oracle Database 12c) will cost ways more in case of failure or even data loss. Bet with me? Let me finally ask you some questions. What cell phone are you using and which OS does it run? Do you have an iPhone 5 and did you upgrade already to iOS 7.0.3? I've just encountered on mine that the alarm (which I rely on when traveling) has gotten now a dependency on the physical switch "sound on/off". If it is switched to "off" physically the alarm rings "silently". What a wonderful example of a behaviour change coming in with a patch set. Will this push you to stay with iOS5 or iOS6? No, because those have security flaws which won't be fixed anymore. What browser are you surfing with? Do you use Mozilla 3.6? Well, congratulations to all the hackers. It will be easy for them to attack you and harm your system. I'd guess you have the auto updater on. Same for Google Chrome, Safari, IE. Right? -Mike The T.htmtableborders, .htmtableborders td, .htmtableborders th {border : 1px dashed lightgrey ! important;} html, body { border: 0px; } body { background-color: #ffffff; } img, hr { cursor: default }

Read the article

Protecting Cookies: Once and For All

- by Your DisplayName here!

Every once in a while you run into a situation where you need to temporarily store data for a user in a web app. You typically have two options here – either store server-side or put the data into a cookie (if size permits). When you need web farm compatibility in addition – things become a little bit more complicated because the data needs to be available on all nodes. In my case I went for a cookie – but I had some requirements Cookie must be protected from eavesdropping (sent only over SSL) and client script Cookie must be encrypted and signed to be protected from tampering with Cookie might become bigger than 4KB – some sort of overflow mechanism would be nice I really didn’t want to implement another cookie protection mechanism – this feels wrong and btw can go wrong as well. WIF to the rescue. The session management feature already implements the above requirements but is built around de/serializing IClaimsPrincipals into cookies and back. But if you go one level deeper you will find the CookieHandler and CookieTransform classes which contain all the needed functionality. public class ProtectedCookie { private List<CookieTransform> _transforms; private ChunkedCookieHandler _handler = new ChunkedCookieHandler(); // DPAPI protection (single server) public ProtectedCookie() { _transforms = new List<CookieTransform> { new DeflateCookieTransform(), new ProtectedDataCookieTransform() }; } // RSA protection (load balanced) public ProtectedCookie(X509Certificate2 protectionCertificate) { _transforms = new List<CookieTransform> { new DeflateCookieTransform(), new RsaSignatureCookieTransform(protectionCertificate), new RsaEncryptionCookieTransform(protectionCertificate) }; } // custom transform pipeline public ProtectedCookie(List<CookieTransform> transforms) { _transforms = transforms; } public void Write(string name, string value, DateTime expirationTime) { byte[] encodedBytes = EncodeCookieValue(value); _handler.Write(encodedBytes, name, expirationTime); } public void Write(string name, string value, DateTime expirationTime, string domain, string path) { byte[] encodedBytes = EncodeCookieValue(value); _handler.Write(encodedBytes, name, path, domain, expirationTime, true, true, HttpContext.Current); } public string Read(string name) { var bytes = _handler.Read(name); if (bytes == null || bytes.Length == 0) { return null; } return DecodeCookieValue(bytes); } public void Delete(string name) { _handler.Delete(name); } protected virtual byte[] EncodeCookieValue(string value) { var bytes = Encoding.UTF8.GetBytes(value); byte[] buffer = bytes; foreach (var transform in _transforms) { buffer = transform.Encode(buffer); } return buffer; } protected virtual string DecodeCookieValue(byte[] bytes) { var buffer = bytes; for (int i = _transforms.Count; i > 0; i—) { buffer = _transforms[i - 1].Decode(buffer); } return Encoding.UTF8.GetString(buffer); } } HTH

Read the article

WIF, ADFS 2 and WCF–Part 2: The Service

- by Your DisplayName here!

OK – so let’s first start with a simple WCF service and connect that to ADFS 2 for authentication. The service itself simply echoes back the user’s claims – just so we can make sure it actually works and to see how the ADFS 2 issuance rules emit claims for the service: [ServiceContract(Namespace = "urn:leastprivilege:samples")] public interface IService { [OperationContract] List<ViewClaim> GetClaims(); } public class Service : IService { public List<ViewClaim> GetClaims() { var id = Thread.CurrentPrincipal.Identity as IClaimsIdentity; return (from c in id.Claims select new ViewClaim { ClaimType = c.ClaimType, Value = c.Value, Issuer = c.Issuer, OriginalIssuer = c.OriginalIssuer }).ToList(); } } The ViewClaim data contract is simply a DTO that holds the claim information. Next is the WCF configuration – let’s have a look step by step. First I mapped all my http based services to the federation binding. This is achieved by using .NET 4.0’s protocol mapping feature (this can be also done the 3.x way – but in that scenario all services will be federated): <protocolMapping> <add scheme="http" binding="ws2007FederationHttpBinding" /> </protocolMapping> Next, I provide a standard configuration for the federation binding: <bindings> <ws2007FederationHttpBinding> <binding> <security mode="TransportWithMessageCredential"> <message establishSecurityContext="false"> <issuerMetadata address="https://server/adfs/services/trust/mex" /> </message> </security> </binding> </ws2007FederationHttpBinding> </bindings> This binding points to our ADFS 2 installation metadata endpoint. This is all that is needed for svcutil (aka “Add Service Reference”) to generate the required client configuration. I also chose mixed mode security (SSL + basic message credential) for best performance. This binding also disables session – you can control that via the establishSecurityContext setting on the binding. This has its pros and cons. Something for a separate blog post, I guess. Next, the behavior section adds support for metadata and WIF: <behaviors> <serviceBehaviors> <behavior> <serviceMetadata httpsGetEnabled="true" /> <federatedServiceHostConfiguration /> </behavior> </serviceBehaviors> </behaviors> The next step is to add the WIF specific configuration (in <microsoft.identityModel />). First we need to specify the key material that we will use to decrypt the incoming tokens. This is optional for web applications but for web services you need to protect the proof key – so this is mandatory (at least for symmetric proof keys, which is the default): <serviceCertificate> <certificateReference storeLocation="LocalMachine" storeName="My" x509FindType="FindBySubjectDistinguishedName" findValue="CN=Service" /> </serviceCertificate> You also have to specify which incoming tokens you trust. This is accomplished by registering the thumbprint of the signing keys you want to accept. You get this information from the signing certificate configured in ADFS 2: <issuerNameRegistry type="...ConfigurationBasedIssuerNameRegistry"> <trustedIssuers> <add thumbprint="d1 … db" name="ADFS" /> </trustedIssuers> </issuerNameRegistry> The last step (promised) is to add the allowed audience URIs to the configuration – WCF clients use (by default – and we’ll come back to this) the endpoint address of the service: <audienceUris> <add value="https://machine/soapadfs/service.svc" /> </audienceUris> OK – that’s it – now we have a basic WCF service that uses ADFS 2 for authentication. The next step will be to set-up ADFS to issue tokens for this service. Afterwards we can explore various options on how to use this service from a client. Stay tuned… (if you want to have a look at the full source code or peek at the upcoming parts – you can download the complete solution here)

Read the article

D2K to OA Framework Transition

- by PRajkumar

What is the difference between D2K form and OA Framework? It is a very innocent but important question for someone that desires to make transition from D2K to OA Framework. I hope you have already read and implemented OA Framework Getting Started. I will re-visit my own experience of implementing HelloWorld program in "OA Framework". When I implemented HelloWorld a year ago, I had no clue as to what I was doing & why I was doing those steps. I merely copied the steps from Oracle Tutorial without understanding them. Hence in this blog, I will try to explain in simple manner the meaning of OA Framework HelloWorld Program and compare the steps to D2K form [where possible]. To keep things simple, only basics will be discussed. Following key Steps were needed for HelloWorld Step 1 Create a new Workspace and a new Project as dictated by Oracle's tutorial. When defining project, you will specify a default package, which in this case was oracle.apps.ak.hello This means the following: - ak is the short name of the Application in Oracle [means fnd_applications.short_name] hello is the name of your project Step 2 Next, you will create a OA Page within hello project Think OA Page as the fmx file itself in D2K. I am saying so because this page gets attached to the form function. This page will be created within hello project, hence the package name oracle.apps.ak.hello.webui Note the webui, it is a convention to have page in webui, means this page represents the Web User Interface You will assign the default AM [OAApplicationModule]. Think of AM "Connection Manager" and "Transaction State Manager" for your page I can't co-relate this to anything in D2k, as there is no concept of Connection Pooling and that D2k is not stateless. Reason being that as soon as you kick off a D2K Form, it connects to a single session of Oracle and sticks to that single Oracle database session. So is not the case in OAF, hence AM is needed. Step 3 You create Region within the Page. · Region is what will store your fields. Text input fields will be of type messageTextInput. Think of Canvas in D2K. You can have nested regions. Stacked Canvas in D2K comes the closest to this component of OA Framework Step 4 Add a button to one of the nested regions The itemStyle should be submitButton, in case you want the page to be submitted when this button is clicked There is no WHEN-BUTTON-PRESSED trigger in OAF. In Framework, you will add a controller java code to handle events like Form Submit button clicks. JDeveloper generates the default code for you. Primarily two functions [should I call methods] will be created processRequest [for UI Rendering Handling] and processFormRequest Think of processRequest as WHEN-NEW-FORM-INSTANCE, though processRequest is very restrictive. Note What is the difference between processRequest and processFormRequest? These two methods are available in the Default Controller class that gets created. processFormRequest This method is commonly used to react/respond to the event that has taken place, for example click of a button. Some examples are if(oapagecontext.getParameter("Cancel") != null) (Do your processing for Cancellation/ Rollback) if(oapagecontext.getParameter("Submit") != null) (Do your validations and commit here) if(oapagecontext.getParameter("Update") != null) (Do your validations and commit here) In the above three examples, you could be calling oapagecontext.forwardImmediately to re-direct the page navigation to some other page if needed. processRequest In this method, usually page rendering related code is written. Effectively, each GUI component is a bean that gets initialised during processRequest. Those who are familiar with D2K forms, something like pre-query may be written in this method. Step 5 In the controller to access the value in field "HelloName" the command is String userContent = pageContext.getParameter("HelloName"); In D2k, we used :block.field. In OAFramework, at submission of page, all the field values get passed into to OAPageContext object. Use getParameter to access the field value To set the value of the field, use OAMessageTextInputBean field HelloName = (OAMessageTextInputBean)webBean.findChildRecursive("HelloName"); fieldHelloName.setText(pageContext,"Setting the default value" ); Note when setting field value in controller: Note 1. Do not set the value in processFormRequest Note 2. If the field comes from View Object, then do not use setText in controller Note 3. For control fields [that are not based on View Objects], you can use setText to assign values in processRequest method Lets take some notes to expand beyond the HelloWorld Project Note 1 In D2K-forms we sort of created a Window, attached to Canvas, and then fields within that Canvas. However in OA Framework, think of Page being fmx/Window, think of Region being a Canvas, and fields being within Regions. This is not a formal/accurate understanding of analogy between D2k and Framework, but is close to being logical. Note 2 In D2k, your Forms fmb file was compiled to fmx. It was fmx file that was deployed on mid-tier. In case of OAF, your OA Page is nothing but a XML file. We call this MDS [meta data]. Whatever name you give to "Page" in OAF, an XML file of the same name gets created. This xml file must then be loaded into database by using XML Importer command. Note 3 Apart from MDS XML file, almost everything else is merely deployed to your mid-tier. Usually this is underneath $JAVA_TOP/oracle/apps/../.. All java files will go underneath java top/oracle/apps/../.. etc. Note 4 When building tutorial, ignore the steps for setting "Attribute Sets". These are not mandatory. Oracle might just have developed their tutorials without including these. Think of these like Visual Attributes of D2K forms Note 5 Controller is where you will write any java code in OA Framework. You can create a Controller per Page or have a different Controller for each of the Regions with the same Page. Note 6 In the method processFormRequest of the Controller, you can access the values of the page by using notation pageContext.getParameter("<fieldname here>"). This method processFormRequest is executed when the OAF Screen/Page is submitted by click of a button. Note 7 Inside the controller, all the Database Related interactions for example interaction with View Objects happen via Application Module. But why so? Because Application Module Manages the transaction state of the Application. OAApplicationModuleImpl oaapplicationmoduleimpl = OAApplicationModuleImpl)oapagecontext.getApplicationModule(oawebbean); OADBTransaction oadbtransaction = OADBTransaction)oaapplicationmoduleimpl.getDBTransaction(); Note 8 In D2K, we have control block or a block based on database view. Similarly, in OA Framework, if the field does not have view Object attached, then it is like a control field. Hence in HelloWorld example, field HelloName is a control field [in D2K terminology]. A view Object can either be based on a view/table, synonym or on a SQL statement. Note 9 I wish to access the fields in multi record block that is based on view Object. Can I do this in Controller? Sure you can. To traverse through those records, do the below · Get the reference to the View Object using (OAViewObject)oapagecontext.getApplicationModule(oawebbean).findViewObject("VO Name Here") · Loop through the records in View Objects using count returned from oaviewobject.getFetchedRowCount() · For each record, fetch the value of the fields within the loop as oracle.jbo.Row row = oaviewobject.getRowAtRangeIndex(loop index here); (String)row.getAttribute("Column name of VO here ");

Read the article

Building an OpenStack Cloud for Solaris Engineering, Part 1

- by Dave Miner

One of the signature features of the recently-released Solaris 11.2 is the OpenStack cloud computing platform. Over on the Solaris OpenStack blog the development team is publishing lots of details about our version of OpenStack Havana as well as some tips on specific features, and I highly recommend reading those to get a feel for how we've leveraged Solaris's features to build a top-notch cloud platform. In this and some subsequent posts I'm going to look at it from a different perspective, which is that of the enterprise administrator deploying an OpenStack cloud. But this won't be just a theoretical perspective: I've spent the past several months putting together a deployment of OpenStack for use by the Solaris engineering organization, and now that it's in production we'll share how we built it and what we've learned so far.In the Solaris engineering organization we've long had dedicated lab systems dispersed among our various sites and a home-grown reservation tool for developers to reserve those systems; various teams also have private systems for specific testing purposes. But as a developer, it can still be difficult to find systems you need, especially since most Solaris changes require testing on both SPARC and x86 systems before they can be integrated. We've added virtual resources over the years as well in the form of LDOMs and zones (both traditional non-global zones and the new kernel zones). Fundamentally, though, these were all still deployed in the same model: our overworked lab administrators set up pre-configured resources and we then reserve them. Sounds like pretty much every traditional IT shop, right? Which means that there's a lot of opportunity for efficiencies from greater use of virtualization and the self-service style of cloud computing. As we were well into development of OpenStack on Solaris, I was recruited to figure out how we could deploy it to both provide more (and more efficient) development and test resources for the organization as well as a test environment for Solaris OpenStack.At this point, let's acknowledge one fact: deploying OpenStack is hard. It's a very complex piece of software that makes use of sophisticated networking features and runs as a ton of service daemons with myriad configuration files. The web UI, Horizon, doesn't often do a good job of providing detailed errors. Even the command-line clients are not as transparent as you'd like, though at least you can turn on verbose and debug messaging and often get some clues as to what to look for, though it helps if you're good at reading JSON structure dumps. I'd already learned all of this in doing a single-system Grizzly-on-Linux deployment for the development team to reference when they were getting started so I at least came to this job with some appreciation for what I was taking on. The good news is that both we and the community have done a lot to make deployment much easier in the last year; probably the easiest approach is to download the OpenStack Unified Archive from OTN to get your hands on a single-system demonstration environment. I highly recommend getting started with something like it to get some understanding of OpenStack before you embark on a more complex deployment. For some situations, it may in fact be all you ever need. If so, you don't need to read the rest of this series of posts!In the Solaris engineering case, we need a lot more horsepower than a single-system cloud can provide. We need to support both SPARC and x86 VM's, and we have hundreds of developers so we want to be able to scale to support thousands of VM's, though we're going to build to that scale over time, not immediately. We also want to be able to test both Solaris 11 updates and a release such as Solaris 12 that's under development so that we can work out any upgrade issues before release. One thing we don't have is a requirement for extremely high availability, at least at this point. We surely don't want a lot of down time, but we can tolerate scheduled outages and brief (as in an hour or so) unscheduled ones. Thus I didn't need to spend effort on trying to get high availability everywhere.The diagram below shows our initial deployment design. We're using six systems, most of which are x86 because we had more of those immediately available. All of those systems reside on a management VLAN and are connected with a two-way link aggregation of 1 Gb links (we don't yet have 10 Gb switching infrastructure in place, but we'll get there). A separate VLAN provides "public" (as in connected to the rest of Oracle's internal network) addresses, while we use VxLANs for the tenant networks. One system is more or less the control node, providing the MySQL database, RabbitMQ, Keystone, and the Nova API and scheduler as well as the Horizon console. We're curious how this will perform and I anticipate eventually splitting at least the database off to another node to help simplify upgrades, but at our present scale this works.I had a couple of systems with lots of disk space, one of which was already configured as the Automated Installation server for the lab, so it's just providing the Glance image repository for OpenStack. The other node with lots of disks provides Cinder block storage service; we also have a ZFS Storage Appliance that will help back-end Cinder in the near future, I just haven't had time to get it configured in yet.There's a separate system for Neutron, which is our Elastic Virtual Switch controller and handles the routing and NAT for the guests. We don't have any need for firewalling in this deployment so we're not doing so. We presently have only two tenants defined, one for the Solaris organization that's funding this cloud, and a separate tenant for other Oracle organizations that would like to try out OpenStack on Solaris. Each tenant has one VxLAN defined initially, but we can of course add more. Right now we have just a single /24 network for the floating IP's, once we get demand up to where we need more then we'll add them.Finally, we have started with just two compute nodes; one is an x86 system, the other is an LDOM on a SPARC T5-2. We'll be adding more when demand reaches the level where we need them, but as we're still ramping up the user base it's less work to manage fewer nodes until then.My next post will delve into the details of building this OpenStack cloud's infrastructure, including how we're using various Solaris features such as Automated Installation, IPS packaging, SMF, and Puppet to deploy and manage the nodes. After that we'll get into the specifics of configuring and running OpenStack itself.

Read the article

CodePlex Daily Summary for Sunday, September 29, 2013

CodePlex Daily Summary for Sunday, September 29, 2013Popular ReleasesAudioWordsDownloader: AudioWordsDownloader 1.1 build 88: New features -------- list of words (mp3 files) is available upon typing when a download path is defined list of download paths is added paths history settings added Bug fixed ----- case mismatch in word search field fixed path not exist bug fixed when history has been used path, when filled from dialog, not stored refresh autocomplete list after path change word sought is deleted when path is changed at the end sought word list is deleted word list not refreshed download end...Activity Viewer 2012: Activity Viewer 2012 V 5.0.0.3: Planning to add new features: 1. Import/Export rules 2. Tabular mode multi servers connections.Tweetinvi a friendly Twitter C# API: Alpha 0.8.3.0: Version 0.8.3.0 emphasis on the FIlteredStream and ease how to manage Exceptions that can occur due to the network or any other issue you might encounter. Will be available through nuget the 29/09/2013. FilteredStream Features provided by the Twitter Stream API - Ability to track specific keywords - Ability to track specific users - Ability to track specific locations Additional features - Detect the reasons the tweet has been retrieved from the Filtered API. You have access to both the ma...AcDown?????: AcDown????? v4.5: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.5 ???? AcPlay????????v3.5 ????????，???????????30% ?? ???????GoodManga.net???? ?? ?????????? ?? ??Acfun?????????? ??Bilibili??????????? ?????????flvcd???????? ??SfAcg????????????? ???????????? ???????????????? ????32...OfflineBrowser: Release v1.2: This release includes some multi-threading support, a better progress bar, more JavaScript fixes, and a help system. This release is also portable (can run with no issues from a flash drive).CtrlAltStudio Viewer: CtrlAltStudio Viewer 1.0.0.34288 Release: This release of the CtrlAltStudio Viewer includes the following significant features: Stereoscopic 3D display support. Based on Firestorm viewer 4.4.2 codebase. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-0-0-34288-release Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or supported by Linden Lab, the makers of ...CrmSvcUtil Generate Attribute Constants: Generate Attribute Constants (1.0.5018.28159): Built against version 5.0.15 of the CRM SDK Fixed issue where constant for primary key attribute was being duplicated in all entity classes Added ability to override base class for entity classesC# Intellisense for Notepad++: Release v1.0.6.0: Added support for classless scripts To avoid the DLLs getting locked by OS use MSI file for the installation.CS-Script for Notepad++: Release v1.0.6.0: Added support for classless scripts To avoid the DLLs getting locked by OS use MSI file for the installation.SimpleExcelReportMaker: Serm 0.02: SourceCode and SampleMagick.NET: Magick.NET 6.8.7.001: Magick.NET linked with ImageMagick 6.8.7.0. Breaking changes: - ToBitmap method of MagickImage returns a png instead of a bmp. - Changed the value for full transparency from 255(Q8)/65535(Q16) to 0. - MagickColor now uses floats instead of Byte/UInt16.Media Companion: Media Companion MC3.578b: With the feedback received over the renaming of Movie Folders, and files, there has been some refinement done. As well as I would like to introduce Blu-Ray movie folder support, for Pre-Frodo and Frodo onwards versions of XBMC. To start with, Context menu option for renaming movies, now has three sub options: Movie & Folder, Movie only & Folder only. The option Manual Movie Rename needs to be selected from Movie Preferences, but the autoscrape boxes do not need to be selected. Blu Ray Fo...WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen v2.1.3.api release: This is for the brave at heart, this is the maint release to update to the new movie api. please send feedback on fix requests.FFXIV Crafting Simulator: Crafting Simulator 2.3: - Major refactoring of the code behind. - Added a current durability and a current CP textbox.DNN CMS Platform: 07.01.02: Major HighlightsAdded the ability to manage the Vanity URL prefix Added the ability to filter members in the member directory by role Fixed issue where the user could inadvertently click the login button multiple times Fixed issues where core classes could not be used in out of process cache provider Fixed issue where profile visibility submenu was not displayed correctly Fixed issue where the member directory was broken when Convert URL to lowercase setting was enabled Fixed issu...Rawr: Rawr 5.4.1: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Sample MVC4 EF Codefirst Architecture: RazMVCWebApp ver 1.1: Signal R sample is added.CODE Framework: 4.0.30923.0: See change notes in the documentation section for details on what's new. Note: If you download the class reference help file with, you have to right-click the file, pick "Properties", and then unblock the file, as many browsers flag the file as blocked during download (for security reasons) and thus hides all content.JayData -The unified data access library for JavaScript: JayData 1.3.2 - Indian Summer Edition: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like WebAPI, OData, MongoDB, WebSQL, SQLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with KendoUI, Angular.js, Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video KendoUI examples: JayData example site Examples for map integration JayData example site What's new in JayData 1.3.2 - Indian Summer Edition For detai...ZXing.Net: ZXing.Net 0.12.0.0: sync with rev. 2892 of the java version new PDF417 decoder improved Aztec decoder global speed improvements direct Kinect support for ColorImageFrame better Structured Append support many other small bug fixes and improvementsNew ProjectsCACHEDB: CLIENT-DATABASE || CLIENT_CACHEDB-DATABASEClassic WiX Burn Theme: A WiX Burn theme inspired by the classic WiX wizard user interface.CryptStr.Fody: A post-build weaver that encrypts literal strings in your .NET assemblies without breaking ClickOnce.Easy Code: A setting framework.EduSoft: This is a school eg.GameStuff: GameStuff is a library of Physics and Geometrics concepts for video game. Nekora Test Project: Nekora test projectPopCorn Console Game: Simple console gameRadioController: This project started from people installing Tablets in Mustangs. You would typically loose most control of the radio. This projects brings that back!Random searcher i pochodne: Wyszukiwarka plików multimedialnych i czego dusza zapragnie.SporkRandom: A .NET (C#, Visual Basic) interface for the true random number generator service of random.org

Search Results

Search found 19393 results on 776 pages for 'reference count'.

Page 731/776 | < Previous Page | 727 728 729 730 731 732 733 734 735 736 737 738 | Next Page >

- by user3215

- by user1332755

- by Chris Skardon

- by anirudha

- by andrewbrust

- by theo.spears

- by Joe Lamantia

- by Bill Osuch

- by Mat Keep

- by Charles Young

- by bryan226

- by Denise McInerney

- by nikolaosk

- by Roger Brinkley

- by Michael Snow

- by Michael Stephenson

- by Ricardo Peres

- by Mike Dietrich

- by Your DisplayName here!

- by Your DisplayName here!

- by PRajkumar

- by Dave Miner

< Previous Page | 727 728 729 730 731 732 733 734 735 736 737 738 | Next Page >