Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 737/778 | < Previous Page | 733 734 735 736 737 738 739 740 741 742 743 744  | Next Page >

  • USB ports causing Wireless and Mobile Phone tethering drop out

    - by chrolli
    I have a problem with my USB ports and I can't seem to pinpoint the problem. I'm hoping that I can get some idea as to how to troubleshoot my problem. Problem description: I recently bought a USB Wireless Adapter in order to connect my Desktop PC to the WLAN. The dongle keeps dropping off connection regularly on average once a minute. And the connection is slow. What I've tried: I installed a network scanner to determine signal strength. The PC/adapter combo is getting about 70% signal strength. I have a laptop that has an internal Wireless adapter. I moved the laptop near the location of the PC. The signal strength was above 90%. I installed the USB adapter on the laptop. I placed the laptop near the location of the PC. The signal strength was above 80%. And there is no drop out issue. I've isolated the problem to be on the PC. I used internet tethering on my mobile phone in order to test the USB ports. I get the same problem, themobile phone keeps dropping in and out. I plugged the adapter and phone on all USB ports, and it is still dropping out on all ports. I've isolated the problem to be the Motherboard, USB hub. I updated the BIOS, and USB driver. Still dropping out. I noticed that when I used the mobile phone tethering method, the phone (iphone 5) is guarenteed to drop out and does not appear to charge if I jiggle the the 8-pin connector on the base of the phone. If I push the pin tightly on the phone, the phone starts charging, as soon as I let go, it stops and drops out from the PC. This is strange because this doesn't happen when it is plugged to the powerboard. Which means that the 8 pin connector is fine. I'm not sure what the problem is. I assume that it is to do with the USB ports not supplying enough power which in turn causes the devices to intermittently drop out. The reason I say this is because the USB cable works fine when plugged into a powerboard with enough power supplied to the phone. Only when it is plugged into the USB port on the PC, does it drop out. My motherboard is Asus P8z68-v le. My Wireless adapter is the D-link DWA131. I can't seem to find any settings in the BIOS to increase the south bridge voltage so as to supply more power to the USB ports. Although this problem only occurs when I'm trying to hook up to a device supplying internet connection. My USB HDD, Flash drives, and Mouse and Key are working fine! Any suggestions please?

    Read the article

  • Globe SSL with NGINX SSL certificate problem, please help

    - by PartySoft
    Hello, I have a big problem with installing a certificat for nginx (same happends with apache though) I have 3 files __domain_com.crt __domain_com.ca-bundle and ssl.key. I tried to append cat __domain_com.crt __leechpack_com.ca-bundle bundle.crt but if I do it like this i get an error: [emerg]: SSL_CTX_use_certificate_chain_file("/etc/nginx/__leechpack_com.crt") failed (SSL: error:0906D066:PEM routines:PEM_read_bio:bad end line error:140DC009:SSL routines:SSL_CTX_use_certificate_chain_file:PEM lib) And that's because the delimiters of the certificates arren't separated. ZqTjb+WBJQ== -----END CERTIFICATE----------BEGIN CERTIFICATE----- MIIE6DCCA9CgAwIBAgIQdIYhlpUQySkmKUvMi/gpLDANBgkqhkiG9w0BAQUFADBv If i separate them with an enter between certificated it will at least start but i will get the same warning from Firefox: This Connection is Untrusted You have asked Firefox to connect securely to domain.com, but we can't confirm that your connection is secure. The concatenate solution it is given by Globe SSL and the NGINX site but it doesn't work. I think the bundle is ignored though. http://customer.globessl.com/knowledgebase/55/Certificate-Installation--Nginx.html http://nginx.org/en/docs/http/configuring_https_servers.html#chains%20http://wiki.nginx.org/NginxHttpSslModule if i do openssl s_client -connect down.leechpack.com:443 CONNECTED(00000003) depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=27:certificate not trusted verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=21:unable to verify the first certificate verify return:1 --- Certificate chain 0 s:/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com i:/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA 1 s:/C=US/O=Globe Hosting, Inc./OU=GlobeSSL DV Certification Authority/CN=GlobeSSL CA i:/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root --- Server certificate -----BEGIN CERTIFICATE----- MIIFQzCCBCugAwIBAgIQRnpCmtwX7z7GTla0QktE6DANBgkqhkiG9w0BAQUFADBl MQswCQYDVQQGEwJSTzEuMCwGA1UEChMlR0xPQkUgSE9TVElORyBDRVJUSUZJQ0FU SU9OIEFVVEhPUklUWTEmMCQGA1UEAxMdR0xPQkUgU1NMIERvbWFpbiBWYWxpZGF0 ZWQgQ0EwHhcNMTAwMjExMDAwMDAwWhcNMTEwMjExMjM1OTU5WjCBjTEhMB8GA1UE CxMYRG9tYWluIENvbnRyb2wgVmFsaWRhdGVkMSgwJgYDVQQLEx9Qcm92aWRlZCBi eSBHbG9iZSBIb3N0aW5nLCBJbmMuMSQwIgYDVQQLExtHbG9iZSBTdGFuZGFyZCBX aWxkY2FyZCBTU0wxGDAWBgNVBAMUDyoubGVlY2hwYWNrLmNvbTCCASIwDQYJKoZI hvcNAQEBBQADggEPADCCAQoCggEBAKX7jECMlYEtcvqVWQVUpXNxO/VaHELghqy/ Ml8dOfOXG29ZMZsKUMqS0jXEwd+Bdpm31lBxOALkj8o79hX0tspLMjgtCnreaker 49y62BcjfguXRFAaiseXTNbMer5lDWiHlf1E7uCoTTiczGqBNfl6qSJlpe4rYBtq XxBAiygaNba6Owghuh19+Uj8EICb2pxbJNFfNzU1D9InFdZSVqKHYBem4Cdrtxua W4+YONsfLnnfkRQ6LOLeYExHziTQhSavSv9XaCl9Zqzm5/eWbQqLGRpSJoEPY/0T GqnmeMIq5M35SWZgOVV10j3pOCS8o0zpp7hMJd2R/HwVaPCLjukCAwEAAaOCAcQw ggHAMB8GA1UdIwQYMBaAFB9UlnKtPUDnlln3STFTCWb5DWtyMB0GA1UdDgQWBBT0 8rPIMr7JDa2Xs5he5VXAvMWArjAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIw ADAdBgNVHSUEFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIwVQYDVR0gBE4wTDBKBgsr BgEEAbIxAQICGzA7MDkGCCsGAQUFBwIBFi1odHRwOi8vd3d3Lmdsb2Jlc3NsLmNv bS9kb2NzL0dsb2JlU1NMX0NQUy5wZGYwRgYDVR0fBD8wPTA7oDmgN4Y1aHR0cDov L2NybC5nbG9iZXNzbC5jb20vR0xPQkVTU0xEb21haW5WYWxpZGF0ZWRDQS5jcmww dwYIKwYBBQUHAQEEazBpMEEGCCsGAQUFBzAChjVodHRwOi8vY3J0Lmdsb2Jlc3Ns LmNvbS9HTE9CRVNTTERvbWFpblZhbGlkYXRlZENBLmNydDAkBggrBgEFBQcwAYYY aHR0cDovL29jc3AuZ2xvYmVzc2wuY29tMCkGA1UdEQQiMCCCDyoubGVlY2hwYWNr LmNvbYINbGVlY2hwYWNrLmNvbTANBgkqhkiG9w0BAQUFAAOCAQEAB2Y7vQsq065K s+/n6nJ8ZjOKbRSPEiSuFO+P7ovlfq9OLaWRHUtJX0sLntnWY1T9hVPvS5xz/Ffl w9B8g/EVvvfMyOw/5vIyvHq722fAAC1lWU1rV3ww0ng5bgvD20AgOlIaYBvRq8EI 5Dxo2og2T1UjDN44GOSWsw5jetvVQ+SPeNPQLWZJS9pNCzFQ/3QDWNPOvHqEeRcz WkOTCqbOSZYvoSPvZ3APh+1W6nqiyoku/FCv9otSCtXPKtyVa23hBQ+iuxqIM4/R gncnUKASi6KQrWMQiAI5UDCtq1c09uzjw+JaEzAznxEgqftTOmXAJSQGqZGd6HpD ZqTjb+WBJQ== -----END CERTIFICATE----- subject=/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com issuer=/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA --- No client certificate CA names sent --- SSL handshake has read 3313 bytes and written 343 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 5F9C8DC277A372E28A4684BAE5B311533AD30E251369D144A13DECA3078E067F Session-ID-ctx: Master-Key: 9B531A75347E6E7D19D95365C1208F2ED37E4004AA8F71FC614A18937BEE2ED9F82D58925E0B3931492AD3D2AA6EFD3B Key-Arg : None Start Time: 1288618211 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) ---

    Read the article

  • Windows Server 2008 - one MAC Address, assign multiple external IP's to VirtualBoxes running as guests on host

    - by Sise
    Couldn't find any help @ google or here. The scenario: Windows Server 2008 Std x64 on i7-975, 12 GB RAM. The server is running in a data centre. One hardware NIC - RealTek PCIe GBE - one MAC Address. The data centre provides us 4 static external IP's. The first is assigned to the host by default of course. I have ordered all 4 IP's, the data centre can assign the available IP's to the physical MAC address of the given NIC only. This means one NIC, one MAC Address, 4 IP's. Everything works fine so far. Now, what I would like to have: Installed VirtualBox with 1-3 guests running, each gets it's own external IP assigned. Each of it should be an standalone Win Server 2008. It looks like the easiest way would be to put the guests into an virtual subnet and routing all data coming to the 2nd till 4th external IP through to this guests using there subnet IP's. I have been through the VirtualBox User Manuel regarding networking. What's not working: I can't use bridged networking without anything else, because the IP's are assigned to the one MAC address only. I can't use NAT networking because it does not allow access from outside or the host to the guest. I do not wanna use port forwarding. Host-only networking itself would not allow internet access, by sharing the default internet connection of the host, internet is granted from the guest to the outside but not from outside or the host to the guest. InternalNetworking is not really an option here. What I have tried is to create an additional MS Loopback adapter for a routed subnet, where the Vbox guests are in, now the idea was to NAT the internet connection to the loopback 'subnet'. But I can't ping the gateway from the guests. By using route command in the command shell or RRAS (static route, NAT) I didn't get there as well. Solutions like the following do work for the one way, but not for the way back: For your situation, it might be best to use the Host-Only adapter for ICS. Go to the preferences of VB itself and select network. There you can change the configuration for the interface. Set the IP address to 192.168.0.1, netmask 255.255.255.0. Disable the DHCP server if it isn't already and that's it. Now the Guest should get an IP from Windows itself and be able to get onto the internet, while you can also access the Host. Slowly I'm pretty stucked with this topic. There is a possibility I've just overlooked something or just didn't getting it by trying, especially using RRAS, but it's kinda hard to find useful howto's or something in the web. Thanks in advance! Best regards, Simon

    Read the article

  • OpenVPN Clients using server's connection (with no default gateway)

    - by Branden Martin
    I wanted an OpenVPN server so that I could create a private VPN network for staff to connect to the server. However, not as planned, when clients connect to the VPN, it's using the VPN's internet connection (ex: when going to whatsmyip.com, it's that of the server and not the clients home connection). server.conf local <serverip> port 1194 proto udp dev tun ca ca.crt cert x.crt key x.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 9 client.conf client dev tun proto udp remote <srever> 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert x.crt key x.key ns-cert-type server comp-lzo verb 3 Server's route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 69.64.48.0 * 255.255.252.0 U 0 0 0 eth0 default static-ip-69-64 0.0.0.0 UG 0 0 0 eth0 default static-ip-69-64 0.0.0.0 UG 0 0 0 eth0 default static-ip-69-64 0.0.0.0 UG 0 0 0 eth0 Server's IP Tables Chain INPUT (policy ACCEPT) target prot opt source destination fail2ban-proftpd tcp -- anywhere anywhere multiport dports ftp,ftp-data,ftps,ftps-data fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:20000 ACCEPT tcp -- anywhere anywhere tcp dpt:webmin ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT tcp -- anywhere anywhere tcp dpt:www ACCEPT tcp -- anywhere anywhere tcp dpt:imaps ACCEPT tcp -- anywhere anywhere tcp dpt:imap2 ACCEPT tcp -- anywhere anywhere tcp dpt:pop3s ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 ACCEPT tcp -- anywhere anywhere tcp dpt:ftp-data ACCEPT tcp -- anywhere anywhere tcp dpt:ftp ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain fail2ban-proftpd (1 references) target prot opt source destination RETURN all -- anywhere anywhere Chain fail2ban-ssh (1 references) target prot opt source destination RETURN all -- anywhere anywhere My goal is that clients can only talk to the server and other clients that are connected. Hope I made sense. Thanks for the help!

    Read the article

  • Windows 2008 R2 CA and auto-enrollment: how to get rid of >100,000 issued certificates?

    - by HopelessN00b
    The basic problem I'm having is that I have 100,000 useless machine certificates cluttering up my CA, and I'd like to delete them, without deleting all certs, or time jumping the server ahead, and invalidating some of the useful certs on there. This came about as a result of accepting a couple defaults with our Enterprise Root CA (2008 R2) and using a GPO to auto-enroll client machines for certificates to allow 802.1x authentication to our corporate wireless network. Turns out that the default Computer (Machine) Certificate Template will happily allow machines to re-enroll instead of directing them to use the certificate they already have. This is creating a number of problems for the guy (me) who was hoping to use the Certificate Authority as more than a log of every time a workstation's been rebooted. (The scroll bar on the side is lying, if you drag it to the bottom, the screen pauses and loads the next few dozen certs.) Does anyone know how to DELETE 100,000 or so time-valid, existing certificates from a Windows Server 2008R2 CA? When I go to delete a certificate now, now, I get an error that it cannot be delete because it's still valid. So, ideally, some way to temporarily bypass that error, as Mark Henderson's provided a way to delete the certificates with a script once that hurdle is cleared. (Revoking them is not an option, as that just moves them to Revoked Certificates, which we need to be able to view, and they can't be deleted from the revoked "folder" either.) Update: I tried the site @MarkHenderson linked, which is promising, and offers much better certificate manageability, buts still doesn't quite get there. The rub in my case seems to be that the certificates are still "time-valid," (not yet expired) so the CA doesn't want to let them be deleted from existence, and this applies to revoked certs as well, so revoking them all and then deleting them won't work either. I've also found this technet blog with my Google-Fu, but unfortunately, they seemed to only have to delete a very large number of certificate requests, not actual certificates. Finally, for now, time jumping the CA forward so the certificates I want to get rid of expire, and therefore can be deleted with the tools at the site Mark linked is not a great option, as would expire a number of valid certificates we use that have to be manually issued. So it's a better option than rebuilding the CA, but not a great one.

    Read the article

  • Netdom to restore machine secret

    - by icelava
    I have a number of virtual machines that have not been switched on for over a month, and some others which have been rolled back to an older state. They are members of a domain, and have expired their machine secrets; thus unable to authenticate with the domain any longer. Event Type: Warning Event Source: LSASRV Event Category: SPNEGO (Negotiator) Event ID: 40960 Date: 14/05/2009 Time: 10:24:54 AM User: N/A Computer: TFS2008WDATA Description: The Security System detected an authentication error for the server ldap/iceland.icelava.home. The failure code from authentication protocol Kerberos was "The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)". For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: c000006d Event Type: Warning Event Source: LSASRV Event Category: SPNEGO (Negotiator) Event ID: 40960 Date: 14/05/2009 Time: 10:24:54 AM User: N/A Computer: TFS2008WDATA Description: The Security System detected an authentication error for the server cifs/iceland.icelava.home. The failure code from authentication protocol Kerberos was "The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)". For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: c000006d Event Type: Error Event Source: NETLOGON Event Category: None Event ID: 3210 Date: 14/05/2009 Time: 10:24:54 AM User: N/A Computer: TFS2008WDATA Description: This computer could not authenticate with \\iceland.icelava.home, a Windows domain controller for domain ICELAVA, and therefore this computer might deny logon requests. This inability to authenticate might be caused by another computer on the same network using the same name or the password for this computer account is not recognized. If this message appears again, contact your system administrator. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: c0000022 So I try to use netdom to re-register the machine back to the domain C:\Documents and Settings\Administrator>netdom reset tfs2008wdata /domain:icelava /UserO:enterpriseadmin /PasswordO:mypassword Logon Failure: The target account name is incorrect. The command failed to complete successfully. But have not been successful. I wonder what else needs to be done?

    Read the article

  • Issue with VMWare vSphere and NFS: re occurring apd state

    - by Bastian N.
    I am experiencing issues with VMWare vSphere 5.1 and NFS storage on 2 different setups, which result in an "All Path Down" state for the NFS shares. This first happened once or twice a day, but lately it occurs much more frequent, as specially when Acronis Backup jobs are running. Setup 1 (Production): 2 ESXi 5.1 hosts (Essentials Plus) + OpenFiler with NFS as storage Setup 2 (Lab): 1 ESXi 5.1 host + Ubuntu 12.04 LTS with NFS as storage Here is an example from the vmkernel.log: 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 248: APD Timer started for ident [987c2dd0-02658e1e] 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 395: Device or filesystem with identifier [987c2dd0-02658e1e] has entered the All Paths Down state. 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 846: APD Start for ident [987c2dd0-02658e1e]! 2013-05-28T08:07:37.485Z cpu0:2052)NFSLock: 610: Stop accessing fd 0x410007e4cf28 3 2013-05-28T08:07:37.485Z cpu0:2052)NFSLock: 610: Stop accessing fd 0x410007e4d0e8 3 2013-05-28T08:07:41.280Z cpu1:2049)StorageApdHandler: 277: APD Timer killed for ident [987c2dd0-02658e1e] 2013-05-28T08:07:41.280Z cpu1:2049)StorageApdHandler: 402: Device or filesystem with identifier [987c2dd0-02658e1e] has exited the All Paths Down state. 2013-05-28T08:07:41.281Z cpu1:2049)StorageApdHandler: 902: APD Exit for ident [987c2dd0-02658e1e]! 2013-05-28T08:07:52.300Z cpu1:3679)NFSLock: 570: Start accessing fd 0x410007e4d0e8 again 2013-05-28T08:07:52.300Z cpu1:3679)NFSLock: 570: Start accessing fd 0x410007e4cf28 again As long as the issue occurred once or twice a day it really wasn't a problem, but now this issue has impact on the VMs. The VMs get slow or even hang, resulting in a reset through vCenter in the production environment. I searched the web extensively and asked in forums, but till now nobody was able to help me. Based on blog posts and VMWare KB articles I tried the following NFS settings: Net.TcpipHeapSize = 32 Net.TcpipHeapMax = 128 NFS.HartbeatFrequency = 12 NFS.HartbeatMaxFailures = 10 NFS.HartbeatTimeout = 5 NFS.MaxQueueDepth = 64 Instead of NFS.MaxQueueDepth = 64 I already tried other settings like NFS.MaxQueueDepth = 32 or even NFS.MaxQueueDepth = 1. Unfortunately without any luck. It would be great if someone could help me on this issue. It is really annoying. Thanks in advance for all the help. [UPDATE] As I explained in the comment below, here is the network setup: On the production setup the NFS traffic is bound to a separate VLAN with ID 20. I am using a HP 1810 24 Port Switch. The OpenFiler system is connected to the VLAN with 4 Intel GbE NICs with dynamic LACP. The ESXis both have 4 Intel GbE NICs using 2 static LACP trunks containing 2 NICs each. One pair is connected to the regular LAN and the other one to the VLAN 20. And here is a screenshot of the vSwitch: Switch configuration: Port configuration: On the lab setup its a single Intel NIC on each side without VLAN, but with different IP subnet.

    Read the article

  • Linux Mint 14 severe overheating

    - by agvares
    I've tried switching to Mint (it was Mint 12) about 6 months ago, but failed to do it due to enormous overheating which made it virtually impossible to run any applications more complex than Gedit. Time had passed, and now I'm back again with Mint 14, but feeling way more determined. What I face are the following issues: 1) Great overheating (and by great I mean that just by doing nothing my CPU temp is floating around 70-75 C, which I find a lot) 2) Running multiple applications (let's say Chrome, Skype and Pidgin) results in critical overheating and immediate shutdown of the system 3) Due to the stuff listed above, my battery drains in about 10-15 minutes, pretty much turning my laptop into a crippled desktop machine I've got a HP-dv6 laptop (i7, 6gb RAM, dual graphics) Here's the output of lspci: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0d:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 13:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01) 19:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) what i've tried to do already: 1) I've edited my grub file to add some "splash" arguments there 2) Installed jupiter and powertop 3) Tried to upgrade to newer kernels (up to 3.8), btw running anything newer than 3.5 results in both resolution and wi-fi detection fail 4) Read lots of forum threads devoted to the topic So, my question is simple: What else might I do to become finally able to use Mint as my default OS without the risk of being burned alive by the CPU heat?

    Read the article

  • Is dual-booting an OS more or less secure than running a virtual machine?

    - by Mark
    I run two operating systems on two separate disk partitions on the same physical machine (a modern MacBook Pro). In order to isolate them from each other, I've taken the following steps: Configured /etc/fstab with ro,noauto (read-only, no auto-mount) Fully encrypted each partition with a separate encryption key (committed to memory) Let's assume that a virus infects my first partition unbeknownst to me. I log out of the first partition (which encrypts the volume), and then turn off the machine to clear the RAM. I then un-encrypt and boot into the second partition. Can I be reasonably confident that the virus has not / cannot infect both partitions, or am I playing with fire here? I realize that MBPs don't ship with a TPM, so a boot-loader infection going unnoticed is still a theoretical possibility. However, this risk seems about equal to the risk of the VMWare/VirtualBox Hypervisor being exploited when running a guest OS, especially since the MBP line uses UEFI instead of BIOS. This leads to my question: is the dual-partitioning approach outlined above more or less secure than using a Virtual Machine for isolation of services? Would that change if my computer had a TPM installed? Background: Note that I am of course taking all the usual additional precautions, such as checking for OS software updates daily, not logging in as an Admin user unless absolutely necessary, running real-time antivirus programs on both partitions, running a host-based firewall, monitoring outgoing network connections, etc. My question is really a public check to see if I'm overlooking anything here and try to figure out if my dual-boot scheme actually is more secure than the Virtual Machine route. Most importantly, I'm just looking to learn more about security issues. EDIT #1: As pointed out in the comments, the scenario is a bit on the paranoid side for my particular use-case. But think about people who may be in corporate or government settings and are considering using a Virtual Machine to run services or applications that are considered "high risk". Are they better off using a VM or a dual-boot scenario as I outlined? An answer that effectively weighs any pros/cons to that trade-off is what I'm really looking for in an answer to this post. EDIT #2: This question was partially fueled by debate about whether a Virtual Machine actually protects a host OS at all. Personally, I think it does, but consider this quote from Theo de Raadt on the OpenBSD mailing list: x86 virtualization is about basically placing another nearly full kernel, full of new bugs, on top of a nasty x86 architecture which barely has correct page protection. Then running your operating system on the other side of this brand new pile of shit. You are absolutely deluded, if not stupid, if you think that a worldwide collection of software engineers who can't write operating systems or applications without security holes, can then turn around and suddenly write virtualization layers without security holes. -http://kerneltrap.org/OpenBSD/Virtualization_Security By quoting Theo's argument, I'm not endorsing it. I'm simply pointing out that there are multiple perspectives here, so I'm trying to find out more about the issue.

    Read the article

  • why can't I open a port on Win 7? is it the app's fault?

    - by rjnagle
    I am having problems opening a port from one Windows PC on my local network. On Windows 7 computer ("Computer A") I running Calibre, an ebook management program that has something called an "ebook content server" . In essence, it serves via the web a content catalog. From Computer A, I can access the content server on localhost. ie. http://127.0.0.1:8787 calls up the content server successfully. With ipconfig I have confirmed that its local IP address is 192.168.1.106 From Computer B (a Vista Machine) I can ping 192.168.1.106 I have tried opening/editing a port in the Windows Firewall several times. In Windows firewall -- Allowed Programs in Control Panel, I see a listing for Calibre (with both Home/Work and PUblic checked) In details, I see Name: Calibre, Port Number 8787, Protocol TCP If I use the Advanced Security configuration screen for the firewall, I created an Inbound Rule on Computer A for Calibre (with the settings I indicated). If I run this command line on Computer A, I see: netstat -a -n TCP 0.0.0.0:554 0.0.0.0:0 LISTENING TCP 0.0.0.0:664 0.0.0.0:0 LISTENING TCP 0.0.0.0:2869 0.0.0.0:0 LISTENING TCP 0.0.0.0:3306 0.0.0.0:0 LISTENING TCP 0.0.0.0:5357 0.0.0.0:0 LISTENING TCP 0.0.0.0:6570 0.0.0.0:0 LISTENING TCP 0.0.0.0:6580 0.0.0.0:0 LISTENING TCP 0.0.0.0:8787 0.0.0.0:0 LISTENING TCP 0.0.0.0:10243 0.0.0.0:0 LISTENING TCP 192.168.1.106:63020 74.125.227.51:80 TIME_WAIT TCP [::]:80 [::]:0 LISTENING TCP [::]:135 [::]:0 LISTENING TCP [::]:443 [::]:0 LISTENING TCP [::]:445 [::]:0 LISTENING TCP [::]:554 [::]:0 LISTENING TCP [::]:2869 [::]:0 LISTENING TCP [::]:5357 [::]:0 LISTENING TCP [::]:6570 [::]:0 LISTENING TCP [::]:6580 [::]:0 LISTENING TCP [::]:10243 [::]:0 LISTENING TCP [::]:49152 [::]:0 LISTENING TCP [::]:49153 [::]:0 LISTENING TCP [::]:49154 [::]:0 LISTENING TCP [::]:49155 [::]:0 LISTENING TCP [::]:49170 [::]:0 LISTENING And lots of other junk, but this seems relevant, I see port 80 is open (I run xampp apache web server for windows on Machine A) This is the only time I see port 8787 referenced from the netstat commmand. From Windows Computer B, I can, ping 192.168.1.106 and even view http://drupal.local (on Computer A) and http://192.168.1.106/ (which goes to the Xampp config screen on Computer A). But I cannot access via Computer B htttp://192.168.1.106:8787 or htttp://computerhosta:8787 So what is going wrong? Is this a problem with the Calibre application or have I incorrectly opened the port? What things could possibly interfere with the opening of this port? On a sidenote, I have tried using telnet from Computer B to see if port 80 or 8787 is open for 192.168.1.106. I get no reply for either one. Thanks.

    Read the article

  • SQL Server 2008 R2 upgrade fails on upgrade rule check

    - by Tim
    I'm trying to upgrade an evaluation instance of SQL Server 2008 to a fully licensed instance of SQL Server 2008 R2. I made it most of the way through the installer, but I'm getting stopped at the Upgrade Rules page - the SQL Server Analysis Services Upgrade Service Functional Check is failing. The specific error I get: Rule "SQL Server Analysis Services Upgrade Service Functional Check" failed. The current instance of the SQL Server Analysis Services service cannot be upgraded because the Analysis Services service is disabled or not online. Please start the service and then run the upgrade rules check again. Simple enough - just need to start the service. Here's where it gets troublesome. When I open Services and go to start the SQL Server Analysis Services (MSSQLSERVER) service, it provides me the following message: The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. Trying from the command line as Administrator yields: PS C:\Windows\System32 net start MSSQLServerOLAPService The SQL Server Analysis Services (MSSQLSERVER) service is starting... The SQL Server Analysis Services (MSSQLSERVER) service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534. I've tried changing the logon setting of this service to Administrator, a user with admin privileges, and both the Local System and Network Service accounts - nothing works. In addition, when I look at the service through the SQL Server Configuration Manager (also run as Administrator), attempting to change the logon setting for the service results in the message: The server threw an exception. [0x80010105] I have no need for analysis services themselves - all I need is for this one service to be running long enough to do the R2 upgrade, then it can shut down again. Any thoughts on how to get the Analysis Services service running? Update: Checking the event log, I found an error logged to the Application log from the MSSQLServerOLAPService. It has event ID 0, task category (289), and says: The service cannot be started: XML parsing failed at line 1, column 4: Unrecognized input signature.

    Read the article

  • Layer 3 switch routing

    - by Yoshiwaan
    I need help moving over to using our layer 3 switch as the inter vlan routing device rather than our cisco router. I've mostly got it working but I've got stuck near the end and need some advice (I think I just need a bit of education on the subject really). Cur I have a Dell PowerConnect 7048 connecting to a Cisco 1841 router. I've got a few key excerpts from the configs to provide the key information. On the powerconnect I have the following: ip routing ip default-gateway 172.31.14.1 ip route 0.0.0.0 0.0.0.0 172.31.14.1 253 ! interface vlan 1 ip address 172.31.14.254 255.255.255.0 exit interface vlan 2 ip address 172.31.19.254 255.255.255.0 exit interface vlan 4 ip address 172.31.16.254 255.255.255.0 ! interface Gi1/0/1 description 'Link to L7Router01' switchport mode trunk switchport trunk allowed vlan except 3,7-4093 exit ! and on the Cisco the following: interface FastEthernet0/0 ip address 172.31.14.1 255.255.255.0 ip nat inside ip virtual-reassembly ! interface FastEthernet0/0.2 description Accounts VLAN encapsulation dot1Q 2 ip address 172.31.19.1 255.255.255.0 ip nat inside ip virtual-reassembly ! interface FastEthernet0/0.4 description Voice VLAN encapsulation dot1Q 4 ip address 172.31.16.1 255.255.255.0 ip nat inside ip virtual-reassembly ! So what I'm doing is moving clients over so that their default gateway is a 172.31.x.254 address rather than a 172.31.x.1 address. This works great for inter-vlan routing, I have no issues with this. The switch can also access the router no worries, and users on the 172.31.14.0/24 network can access all interfaces and sub-interfaces on the router, including 172.31.14.1. They can also access all of the interfaces that the router connects off to, no worries there. The problem I have is that users on the 172.31.16.0/24 and 172.31.19.0/24 subnets cannot access either 172.31.14.1 or any of the subnets the router connects to. They can, however, connect to BOTH of the sub interfaces on the router from either subnet. What am I missing here? Why can't the vlans connect to the non-sub interface on the router? Are tagged packets being sent to this interface?

    Read the article

  • Ubuntu 12.10 Clock is wrong

    - by mardavi
    I have an issue with Ubuntu Quantal, as it shows the wrong time. It is completely messy, the right time from time.is now is 09.43 and my clock shows 17.48. I am using ntp service and I already checked the timezone and it is correct. I also checked the hardware clock through sudo hwclock --showsudo dpkg-reconfigure tzdata and this is right too. I also tried sudo dpkg-reconfigure tzdata but with bad luck. What else can I try? As asked, here my /etc/ntp.conf # /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help driftfile /var/lib/ntp/ntp.drift # Enable this if you want statistics to be logged. #statsdir /var/log/ntpstats/ statistics loopstats peerstats clockstats filegen loopstats file loopstats type day enable filegen peerstats file peerstats type day enable filegen clockstats file clockstats type day enable # Specify one or more NTP servers. # Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board # on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for # more information. server 0.ubuntu.pool.ntp.org server 1.ubuntu.pool.ntp.org server 2.ubuntu.pool.ntp.org server 3.ubuntu.pool.ntp.org server time.nist.gov # Use Ubuntu's ntp server as a fallback. server ntp.ubuntu.com # Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for # details. The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions> # might also be helpful. # # Note that "restrict" applies to both servers and clients, so a configuration # that might be intended to block requests from certain clients could also end # up blocking replies from your own upstream servers. # By default, exchange time with everybody, but don't allow configuration. restrict -4 default kod notrap nomodify nopeer noquery restrict -6 default kod notrap nomodify nopeer noquery # Local users may interrogate the ntp server more closely. restrict 127.0.0.1 restrict ::1 # Clients from this (example!) subnet have unlimited access, but only if # cryptographically authenticated. #restrict 192.168.123.0 mask 255.255.255.0 notrust # If you want to provide time to your local subnet, change the next line. # (Again, the address is an example only.) #broadcast 192.168.123.255 # If you want to listen to time broadcasts on your local subnet, de-comment the # next lines. Please do this only if you trust everybody on the network! #disable auth #broadcastclient In addition, the ntp service was not running when I turned on my laptop today.

    Read the article

  • configure squid3 to set up a web proxy in ubuntu12.04

    - by Gnijuohz
    I am in a LAN and have to use a proxy given to access the web in a very limited way. I can't even use google, github.com or SE sites. However I can use ssh to log into a server, which I have root access so basically I can do anything I want with it. So I was thinking that maybe I could use that server as a proxy so I can visit sites through it. I tested it using ssh -vT [email protected] which gave a proper response. And In my computer I can't do this. Also I tried downloading something from the gun.org using wget, which can't be done in my computer too. And it succeeded on that server. I don't know if that's enough to say that this server have full access to the Internet. But I assumed so and I installed squid3 on it. After trying some while, I failed to get it working. I got this after I run squid3 -k parse 2012/07/06 21:45:18| Processing Configuration File: /etc/squid3/squid.conf (depth 0) 2012/07/06 21:45:18| Processing: acl manager proto cache_object 2012/07/06 21:45:18| Processing: acl localhost src 127.0.0.1/32 ::1 2012/07/06 21:45:18| Processing: acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 2012/07/06 21:45:18| Processing: acl localnet src 10.1.0.0/16 # RFC1918 possible internal network 2012/07/06 21:45:18| Processing: acl SSL_ports port 443 2012/07/06 21:45:18| Processing: acl Safe_ports port 80 # http 2012/07/06 21:45:18| Processing: acl Safe_ports port 21 # ftp 2012/07/06 21:45:18| Processing: acl Safe_ports port 443 # https 2012/07/06 21:45:18| Processing: acl Safe_ports port 70 # gopher 2012/07/06 21:45:18| Processing: acl Safe_ports port 210 # wais 2012/07/06 21:45:18| Processing: acl Safe_ports port 1025-65535 # unregistered ports 2012/07/06 21:45:18| Processing: acl Safe_ports port 280 # http-mgmt 2012/07/06 21:45:18| Processing: acl Safe_ports port 488 # gss-http 2012/07/06 21:45:18| Processing: acl Safe_ports port 591 # filemaker 2012/07/06 21:45:18| Processing: acl Safe_ports port 777 # multiling http 2012/07/06 21:45:18| Processing: acl CONNECT method CONNECT 2012/07/06 21:45:18| Processing: http_port 3128 transparent vhost vport 2012/07/06 21:45:18| Starting Authentication on port [::]:3128 2012/07/06 21:45:18| Disabling Authentication on port [::]:3128 (interception enabled) 2012/07/06 21:45:18| Disabling IPv6 on port [::]:3128 (interception enabled) 2012/07/06 21:45:18| Processing: cache_mem 1000 MB 2012/07/06 21:45:18| Processing: cache_swap_low 90 2012/07/06 21:45:18| Processing: coredump_dir /var/spool/squid3 2012/07/06 21:45:18| Processing: refresh_pattern ^ftp: 1440 20% 10080 2012/07/06 21:45:18| Processing: refresh_pattern ^gopher: 1440 0% 1440 2012/07/06 21:45:18| Processing: refresh_pattern -i (/cgi-bin/|?) 0 0% 0 2012/07/06 21:45:18| Processing: refresh_pattern (Release|Packages(.gz)*)$ 0 20% 2880 2012/07/06 21:45:18| Processing: refresh_pattern . 0 20% 4320 2012/07/06 21:45:18| Processing: ipcache_high 95 2012/07/06 21:45:18| Processing: http_access allow all I deleted some allow and deny rules and added http_access allow all so that all the request would be allowed. After configuring my computer, I got this error: Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect. And the log in the server showed that my TCP requests had all been denied. So, first of all, is what I am trying to do achievable? If so, how to configure the squid in the server so that I use it as a proxy to surf the Internet? My computer and the server both run Ubuntu11.04. Thanks for any help~

    Read the article

  • How is incoming SMTP mail being delivered despite blocked port

    - by Josh
    I setup a MX mail server, everything works despite port 25 being blocked, I'm stumped as to why I am able to receive email with this setup, and what the consequences might be if I leave it this way. Here are the details: Connections to SMTP over port 25 and 587 both reliably connect over my local network. Connections to SMTP over port 25 are blocked from external IPs (the ISP is blocking the port). Connections to Submission SMTP over port 587 from external IPs are reliable. Emails sent from gmail, yahoo, and a few other addresses all are being delivered. I haven't found an email provider that fails to deliver mail to my MX. So, with port 25 blocked, I am assuming other MTA servers fallback to port 587, otherwise I can't imagine how the mail is received. I know port 25 shouldn't be blocked, but so far it works. Are there mail servers that this will not work with? Where can I find more about how this is working? -- edit More technical detail, to validate that I'm not missing something silly. Obviously in the transcript below I've replaced my actual domain with example.com. # DNS MX record points to the A record. $ dig example.com MX +short 1 example.com $ dig example.com A +short <Public IP address> # From a public server (not my ISP hosting the mail server) # We see port 25 is blocked, but port 587 is open $ telnet example.com 25 Trying <public ip>... telnet: Unable to connect to remote host: Connection refused # Let's try openssl $ openssl s_client -starttls smtp -crlf -connect example.com:25 connect: Connection refused connect:errno=111 # Again from a public server, we see port 587 is open $ telnet example.com 587 Trying <public ip>... Connected to example.com. Escape character is '^]'. 220 example.com ESMTP Postfix ehlo example.com 250-example.com 250-PIPELINING 250-SIZE 10485760 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250-DSN 250-BINARYMIME 250 CHUNKING quit 221 2.0.0 Bye Connection closed by foreign host. Here is a portion from the mail log when receiving a message from gmail: postfix/postscreen[93152]: CONNECT from [209.85.128.49]:48953 to [192.168.0.10]:25 postfix/postscreen[93152]: PASS NEW [209.85.128.49]:48953 postfix/smtpd[93160]: connect from mail-qe0-f49.google.com[209.85.128.49] postfix/smtpd[93160]: 7A8C31C1AA99: client=mail-qe0-f49.google.com[209.85.128.49] The log shows that a connection was made to the local IP on port 25 (I'm not doing any port mapping, so it is port 25 on the public IP too). Seeing this leads me to hypothesize that the ISP block on port 25 only occurs when a connection is made from an IP address that is not known to be a mail server. Any other theories?

    Read the article

  • Logitech Optical Mouse Frozen In Middle of Windows XP Pro Screen

    - by Code Sherpa
    I have a Logitech Optical Mouse/Keyboard. I have been using them just fine with the system drivers for almost a year now. I recently updated my Kaspersky software and rebooted. Now the mouse is frozen in the middle of my screen. I am not able to login to the Windows XP Pro box that has the frozen mouse (because i can't work the mouse) but am able to remote desktop to this computer. Things I know / have tried: When I boot on the problem computer, I am able to use the keyboard, but not the mouse. I have installed the latest version of Logitech's SetPoint (with the updated drivers) on the problem computer (via remote desktop) and that didn't seem to matter. I bought new batteries for the mouse and that didn't matter. I have tried the mouse/keyboard on another computer and the mouse works just fine there. My suspicion is that the Kaspersky install has overwritten a driver of some sort. Things I have not done (and would appreciate detailed steps if you feel this is the way to go): 1) Uninstalled all the mouse drivers on the machine and reboot. Then, reinstall. Note: When I get to the Device Manager I don't see an option for Human Interface Devices (where the mouse device is). Here are my options: Computer, Disk Drives, DVD/CD-Rom drives, Floppy controllers, IDE ATA/ATAPI, Imaging devices, Network Adapters, Other devices, Ports, Processors, Sound, video, and gaming, System devices, USB controllers. Also, I should point out that Video Controller is the only thing under Other devices and it has a yellow exclamation mark. The same is true for all the items under Universal Serial Bus controllers. I think this means I have to update my BIOS but, since my mouse was working just fine without doing that, I don't think that is my problem. So, how do I get to my Mouse Device? 2) Update my BIOS. Note: As pointed out above, I don't think this matters as my mouse was working just fine under my computer's current BIOS version. Thanks for your help.

    Read the article

  • Virtual Machine with Bridged Adapter to Centos not accepting ssh from host machine [migrated]

    - by javadba
    I have a bridged connection on VirtualBox from os/x 10.8.5 host to Centos 5.8 client. But I suspect this is more of a general issue than specific to the host and precise version of linux. Shown below are the networking info from the VirtualBox and from within the guest sshd is running on port 22: [root@oracle-linux ~]# ps -ef | grep sshd | grep -v grep root 3103 1 0 20:22 ? 00:00:00 /usr/sbin/sshd root 14994 3103 0 21:23 ? 00:00:00 sshd: root@pts/1 Port 22 listening: [root@oracle-linux ~]# netstat -an | grep 22 | grep tcp | grep LIST tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Here are ip addresses, still on the guest os: [root@oracle-linux ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b9:e5:79 brd ff:ff:ff:ff:ff:ff inet 10.0.15.100/24 brd 10.0.15.255 scope global eth0 inet6 fe80::a00:27ff:feb9:e579/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b4:86:8a brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global eth1 inet6 fe80::a00:27ff:feb4:868a/64 scope link valid_lft forever preferred_lft forever [root@oracle-linux ~]# I can ssh to the guest from the guest: root@oracle-linux ~]# ssh 10.0.3.15 The authenticity of host '10.0.3.15 (10.0.3.15)' can't be established. RSA key fingerprint is ef:08:19:72:95:4d:e5:28:af:f3:6f:54:07:84:ba:04. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.3.15' (RSA) to the list of known hosts. [email protected]'s password: Last login: Mon Oct 21 21:24:12 2013 from 10.0.15.100 But can NOT ssh from the host to the guest: 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection Here is bridged connection infO; BTW I looked into other answers, and one of them mentioned doing service iptables stop That did not help. Adapter 2 is a NAT, shown below In case NAT is causing any issues, i shut it down and restarted networking. [root@oracle-linux ~]# /etc/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: Still No joy.. 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection

    Read the article

  • How to solve/disable spam sending with my postfix server on linux

    - by Dukla
    I am quite new in setting up e-mail server on linux - I barely set up the whole think to get it working and connected it with my domain and php script which uses PHPMailer 5.2.1. In my setting I am using smtp server from my web provider (domain) and all e-mail which are not defined (trash) are sent on one simple address like I have address [email protected]. So when somebody will send email to [email protected] it will be forwarded again to [email protected] even in case of failure. I am receiving emails like: Hi. This is the qmail-send program at comercio.interone.com.br. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[email protected]>: Sorry, no mailbox here by that name. (#5.1.1) --- Below this line is a copy of the message. Return-Path: <[email protected]> Received: (qmail 49156 invoked from network); 25 Jun 2012 07:34:57 -0300 Received: from unknown (HELO S0106602ad08df877.no.shawcable.net) (70.66.34.103) by hosting.interone.com.br with SMTP; 25 Jun 2012 07:34:57 -0300 Message-Id: <20120625034039.B45C12DCC3B13A22F261@GANDERTO-015445> From: Ezra Whitehead <[email protected]> To: toa <[email protected]> Reply-To: Jamey Mcconnell <[email protected]> Subject: Welcome toa Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Visit our shop http://44090.medicneed.ru/ 113B726C73560AA41A68163AA474D5F1476 0225770686522678 As you can see there is line From: Ezra Whitehead <[email protected]> I am sure I did not send this email from my domain.com with some Davis8FB name and some russian page. This is just one of many and only NOT-delivered e-mails - there can be much more which has been sent successfully! What do I have wrong in my settings? How can I make it right? What should I do to prevent these messages to send? Where should I look? Thank you all.

    Read the article

  • How to troubleshoot performance issues of PHP, MySQL and generic I/O

    - by jbx
    I have a WordPress based website running on a shared hosting. Its response time is very decent (around 2s to retrieve the HTML page and 5s to load all the resources). I was planning to move it to a dedicated virtual server (Ubuntu 12.04 LTS), which should theoretically improve things and make them more consistent given its not shared. However I observed severe performance degredation, with the page taking 10seconds to be generated. I ruled out network issues by editing /etc/hosts on the server and mapping the domain to 127.0.0.1. I used the Apache load tester ab to get the HTML, so JS, CSS and images are all excluded. It still took 10 seconds. I have Zpanel installed on the server which also uses MySQL, and its pages come up quite fast (1.5s) and also phpMyAdmin. Performing some queries on the wordpress database directly through phpMyAdmin returns them quite fast too, with query times in the 10 to 30 millisecond region. Memory is also sufficient, with only 800Mb being used of the 1Gb physical memory available, so it doesn't seem to be a swap issue either. I have also installed APC to try to improve the PHP performance, but it didn't have any effect. What else should I look for? What could be causing this degradation in performance? Could it be some kind of I/O issue since I am running on a cloud based virtual server? I wish to be able to raise the issue with my provider but without showing actual data from some diagnosis I am afraid he will just blame my application. UPDATE with sar output (every second) when I did an HTTP request: 02:31:29 CPU %user %nice %system %iowait %steal %idle 02:31:30 all 0.00 0.00 0.00 0.00 0.00 100.00 02:31:31 all 2.22 0.00 2.22 0.00 0.00 95.56 02:31:32 all 41.67 0.00 6.25 0.00 2.08 50.00 02:31:33 all 86.36 0.00 13.64 0.00 0.00 0.00 02:31:34 all 75.00 0.00 25.00 0.00 0.00 0.00 02:31:35 all 93.18 0.00 6.82 0.00 0.00 0.00 02:31:36 all 90.70 0.00 9.30 0.00 0.00 0.00 02:31:37 all 71.05 0.00 0.00 0.00 0.00 28.95 02:31:38 all 14.89 0.00 10.64 0.00 2.13 72.34 02:31:39 all 2.56 0.00 0.00 0.00 0.00 97.44 02:31:40 all 0.00 0.00 0.00 0.00 0.00 100.00 02:31:41 all 0.00 0.00 0.00 0.00 0.00 100.00 My suspicion that this comes from I/O related issue is also because a caching plugin I use to reduce the amount of queries to the database, by precompiling PHP pages is actually making things worse instead of better. It seems that file access is making things worse instead.

    Read the article

  • How to add an iptables rule with source IP address

    - by ???
    I have a bash script that starts with this: if [[ $EUID -ne 0 ]]; then echo "Permission denied (are you root?)." exit 1 elif [ $# -ne 1 ] then echo "Usage: install-nfs-server <client network/CIDR>" echo "$ bash install-nfs-server 192.168.1.1/24" exit 2 fi; I then try to add the iptables rules for NFS as follows: iptables -A INPUT -i eth0 -p tcp -s $1 --dport 111 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 111 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p udp -s $1 --dport 111 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 111 -m state --state ESTABLISHED -j ACCEPT service iptables save service iptables restart I get the error: Try iptables -h' or 'iptables --help' for more information. Bad argument111' Try iptables -h' or 'iptables --help' for more information. Bad argument111' Saving firewall rules to /etc/sysconfig/iptables: ^[[60G[^[[0;32m OK ^[[0;39m]^M Flushing firewall rules: ^[[60G[^[[0;32m OK ^[[0;39m]^M Setting chains to policy ACCEPT: filter ^[[60G[^[[0;32m OK ^[[0;39m]^M Unloading iptables modules: ^[[60G[^[[0;32m OK ^[[0;39m]^M Applying iptables firewall rules: ^[[60G[^[[0;32m OK ^[[0;39m]^M Loading additional iptables modules: ip_conntrack_netbios_ns ^[[60G[^[[0;32m OK ^[[0;39m]^M When I open /etc/sysconfig/iptables these are the rules: # Generated by iptables-save v1.3.5 on Mon Mar 26 08:00:42 2012 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [466:54208] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A OUTPUT -o eth0 -p tcp -m tcp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m state --state NEW -m udp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -p icmp -m icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -p esp -j ACCEPT -A RH-Firewall-1-INPUT -p ah -j ACCEPT -A RH-Firewall-1-INPUT -d 224.0.0.251 -p udp -m udp --dport 5353 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited COMMIT # Completed on Mon Mar 26 08:00:42 2012 ~ "/etc/sysconfig/iptables" 32L, 1872C I've also tried: iptables -I RH-Firewall-1-INPUT 1 -m state --state NEW -m tcp -p tcp --source $1 --dport 111 -j ACCEPT iptables -I RH-Firewall-1-INPUT 2 -m udp -p udp --source $1 --dport 111 -j ACCEPT

    Read the article

  • DNS and DHCP dies after ~2 days of use on ClearOS

    - by TheLQ
    I'm using ClearOS (based on CentOS, so any info specific to it should apply here) as a gateway, DHCP, and DNS server. I had this server running perfectly for a month or two before replacing it with another server. However due DNS and DHCP failing 2 days in and a host of other performance issues (the box was a little underpowered), I changed back to the origional server. However 2 days in DHCP and DNS are failing again, and I'm out of idea's on why. In both cases to my knowledge no network or server changes occurred after installation. Right after installing (and at least a day in) DNS and DHCP was working just fine. However later (Day 2) I get a call saying their internet is down (translation: Nobody can get to websites because DNS is down) I've tried to fix the problem by checking if the dnsmasq is even running (it is), restarting the service, and restarting the server to no effect. I do have two internal servers that have static DHCP leases but one's lease must of expired as I can't connect to it anymore. I'm hesitant to do any dhcp testing on the last server as I'll not be able to connect to it anymore. Is there anything anyone can think of on why DNS and DHCP would fail 2 days in to running perfectly? More info: Running dnsmasq in debug mode. This is all that's displayed even when running nslookup quackwall. I'm not sure though if nslookup commands should show up in the log [root@quackwall ~]# /usr/sbin/dnsmasq -dq dnsmasq: started, version 2.49 cachesize 150 dnsmasq: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP dnsmasq-dhcp: DHCP, IP range 10.0.0.100 -- 10.0.0.254, lease time 12h dnsmasq: reading /etc/resolv.conf dnsmasq: using nameserver 74.128.17.114#53 dnsmasq: using nameserver 74.128.19.102#53 dnsmasq: read /etc/hosts - 5 addresses dnsmasq-dhcp: read /etc/ethers - 2 addresses On the other server DNS and the Gateway are all configured correctly (10.0.0.2 is quackwall) lordquackstar@quackgame:~$ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.0.0.0 0.0.0.0 255.255.240.0 U 0 0 0 eth0 0.0.0.0 10.0.0.2 0.0.0.0 UG 0 0 0 eth0 lordquackstar@quackgame:~$ cat /etc/resolv.conf nameserver 10.0.0.2 domain highwow.lan search highwow.lan

    Read the article

  • Ubuntu Newbie Needs Assistance!!

    - by Steve Greene
    New Ubuntu User Needs Help!- version 9.10 does not communicate with laptop Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, even when sitting directly under the wireless router at the local library (literally), which puts out a wickedly-fast signal that my Windows Vista OS auto-detects and immediately connects to. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all, even though I am only a few feet from the router. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I desparately wish to convert to Ubuntu. I used Mac for ten years, and then Windows for ten years. Now, after 20 years, I want to live out my days as an open-source Ubuntu fanatic. I am ready to give the old status quo the boot! I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch so that I can move on in total Ubuntu bliss? My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System. I am running Windows Vista Home Basic, Service Pack 2. My current email is [email protected] if you have a workable solution that does not require programmer status to implement. Surely this must be a simple fix that I simply am overlooking, but being the new guy on the block, I have yet to be enlightened. Thanks for your help in coming up to speed!! Steve Wanna' be Ubuntu Fanatic "If you're not living on the edge, you're taking up too much space."

    Read the article

  • Root directory permissions on Mac OS X 10.6?

    - by Agos
    Hi, I was wondering if it's normal that the root directory / should be owned by “root”. I get asked for my password every time I want to do something there (e.g. save a file, create a directory) and I don't remember this happening before (though this may just be my faulty memory). Here's the relevant terminal output: MacBook:~ ago$ ls -lah / total 37311 drwxr-xr-x@ 35 root staff 1,2K 22 Mar 12:34 . drwxr-xr-x@ 35 root staff 1,2K 22 Mar 12:34 .. -rw-rw-r--@ 1 root admin 21K 22 Mar 10:21 .DS_Store drwx------ 3 root admin 102B 28 Feb 2008 .Spotlight-V100 d-wx-wx-wt 2 root admin 68B 31 Ago 2009 .Trashes -rw-r--r--@ 1 ago 501 45K 23 Gen 2008 .VolumeIcon.icns srwxrwxrwx 1 root staff 0B 22 Mar 12:34 .dbfseventsd ---------- 1 root admin 0B 23 Giu 2009 .file drwx------ 27 root admin 918B 22 Mar 10:55 .fseventsd -rw-r--r--@ 1 ago admin 59B 30 Ott 2007 .hidden -rw------- 1 root wheel 320K 30 Nov 11:42 .hotfiles.btree drwxr-xr-x@ 2 root wheel 68B 18 Mag 2009 .vol drwxrwxr-x+ 276 root admin 9,2K 19 Mar 18:28 Applications drwxrwxr-x@ 21 root admin 714B 14 Nov 12:01 Developer drwxrwxr-t+ 74 root admin 2,5K 18 Dic 22:14 Library drwxr-xr-x@ 2 root wheel 68B 23 Giu 2009 Network drwxr-xr-x 4 root wheel 136B 13 Nov 17:49 System drwxr-xr-x 6 root admin 204B 31 Ago 2009 Users drwxrwxrwt@ 4 root admin 136B 22 Mar 12:35 Volumes drwxr-xr-x@ 39 root wheel 1,3K 13 Nov 17:44 bin drwxrwxr-t@ 2 root admin 68B 23 Giu 2009 cores dr-xr-xr-x 3 root wheel 5,1K 17 Mar 11:29 dev lrwxr-xr-x@ 1 root wheel 11B 31 Ago 2009 etc -> private/etc dr-xr-xr-x 2 root wheel 1B 17 Mar 11:30 home drwxrwxrwt@ 3 root wheel 102B 31 Ago 2009 lost+found -rw-r--r--@ 1 root wheel 18M 3 Nov 19:40 mach_kernel dr-xr-xr-x 2 root wheel 1B 17 Mar 11:30 net drwxr-xr-x@ 3 root admin 102B 24 Nov 2007 opt drwxr-xr-x@ 6 root wheel 204B 31 Ago 2009 private drwxr-xr-x@ 64 root wheel 2,1K 13 Nov 17:44 sbin lrwxr-xr-x@ 1 root wheel 11B 31 Ago 2009 tmp -> private/tmp drwxr-xr-x@ 17 root wheel 578B 12 Set 2009 usr lrwxr-xr-x@ 1 root wheel 11B 31 Ago 2009 var -> private/var Are these ownerships / permissions ok? Should I chmod/chown something? Thanks in advance

    Read the article

  • Slow Memcached: Average 10ms memcached `get`

    - by Chris W.
    We're using Newrelic to measure our Python/Django application performance. Newrelic is reporting that across our system "Memcached" is taking an average of 12ms to respond to commands. Drilling down into the top dozen or so web views (by # of requests) I can see that some Memcache get take up to 30ms; I can't find a single use of Memcache get that returns in less than 10ms. More details on the system architecture: Currently we have four application servers each of which has a memcached member. All four memcached members participate in a memcache cluster. We're running on a cloud hosting provider and all traffic is running across the "internal" network (via "internal" IPs) When I ping from one application server to another the responses are in ~0.5ms Isn't 10ms a slow response time for Memcached? As far as I understand if you think "Memcache is too slow" then "you're doing it wrong". So am I doing it wrong? Here's the output of the memcache-top command: memcache-top v0.7 (default port: 11211, color: on, refresh: 3 seconds) INSTANCE USAGE HIT % CONN TIME EVICT/s GETS/s SETS/s READ/s WRITE/s cache1:11211 37.1% 62.7% 10 5.3ms 0.0 73 9 3958 84.6K cache2:11211 42.4% 60.8% 11 4.4ms 0.0 46 12 3848 62.2K cache3:11211 37.5% 66.5% 12 4.2ms 0.0 75 17 6056 170.4K AVERAGE: 39.0% 63.3% 11 4.6ms 0.0 64 13 4620 105.7K TOTAL: 0.1GB/ 0.4GB 33 13.9ms 0.0 193 38 13.5K 317.2K (ctrl-c to quit.) ** Here is the output of the top command on one machine: ** (Roughly the same on all cluster machines. As you can see there is very low CPU utilization, because these machines only run memcache.) top - 21:48:56 up 1 day, 4:56, 1 user, load average: 0.01, 0.06, 0.05 Tasks: 70 total, 1 running, 69 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.3%st Mem: 501392k total, 424940k used, 76452k free, 66416k buffers Swap: 499996k total, 13064k used, 486932k free, 181168k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 6519 nobody 20 0 384m 74m 880 S 1.0 15.3 18:22.97 memcached 3 root 20 0 0 0 0 S 0.3 0.0 0:38.03 ksoftirqd/0 1 root 20 0 24332 1552 776 S 0.0 0.3 0:00.56 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 4 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0 5 root 20 0 0 0 0 S 0.0 0.0 0:00.02 kworker/u:0 6 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0.0 0.0 0:00.62 watchdog/0 8 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 cpuset 9 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper ...output truncated...

    Read the article

  • Excessive CPU Utilization for Bind 9.8.1 `named` processes

    - by justinzane
    I just noticed that named is eating vast amounts of CPU time for a very small network with only a few domains. Can someone help me determine what is misconfigured, please? Or how to debug this. top top - 14:13:08 up 25 days, 14:16, 1 user, load average: 1.04, 1.04, 1.05 Tasks: 149 total, 1 running, 148 sleeping, 0 stopped, 0 zombie %Cpu(s): 17.3 us, 4.3 sy, 0.0 ni, 78.2 id, 0.1 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem: 2042776 total, 1347916 used, 694860 free, 249396 buffers KiB Swap: 3976080 total, 30552 used, 3945528 free, 574164 cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 17445 bind 20 0 244m 42m 3124 S 99.4 2.2 2345:03 named rndc stats +++ Statistics Dump +++ (1352931389) ++ Incoming Requests ++ 65869 QUERY ++ Incoming Queries ++ 31809 A 241 NS 3 CNAME 27455 SOA 276 PTR 123 MX 462 TXT 5400 AAAA 7 A6 1 DS 14 DNSKEY 15 SPF 55 AXFR 8 ANY ++ Outgoing Queries ++ [View: internal] 22206 A 509 NS 10 SOA 25 PTR 12 MX 524 TXT 4851 AAAA 62 DNSKEY 19 SPF 3157 DLV [View: external] 87 A 2 NS 80 AAAA 120 DNSKEY 7 DLV [View: _bind] ++ Name Server Statistics ++ 65869 IPv4 requests received 27670 requests with EDNS(0) received 112 TCP requests received 65652 responses sent 20 truncated responses sent 27670 responses with EDNS(0) sent 62920 queries resulted in successful answer 37117 queries resulted in authoritative answer 28482 queries resulted in non authoritative answer 7 queries resulted in referral answer 591 queries resulted in nxrrset 53 queries resulted in SERVFAIL 2081 queries resulted in NXDOMAIN 14530 queries caused recursion 162 duplicate queries received 55 requested transfers completed ++ Zone Maintenance Statistics ++ 109536 IPv4 notifies sent ++ Resolver Statistics ++ [Common] [View: internal] 29362 IPv4 queries sent 2013 IPv6 queries sent 28531 IPv4 responses received 4209 NXDOMAIN received 6 SERVFAIL received 31 FORMERR received 32 EDNS(0) query failures 3359 query retries 836 query timeouts 5348 IPv4 NS address fetches 3271 IPv6 NS address fetches 83 IPv4 NS address fetch failed 2779 IPv6 NS address fetch failed 17421 DNSSEC validation attempted 12731 DNSSEC validation succeeded 4690 DNSSEC NX validation succeeded 21104 queries with RTT 10-100ms 7418 queries with RTT 100-500ms 3 queries with RTT 500-800ms 1 queries with RTT 800-1600ms [View: external] 192 IPv4 queries sent 104 IPv6 queries sent 192 IPv4 responses received 2 NXDOMAIN received 104 query retries 44 IPv4 NS address fetches 44 IPv6 NS address fetches 1 IPv4 NS address fetch failed 1 IPv6 NS address fetch failed 4 DNSSEC validation attempted 3 DNSSEC validation succeeded 1 DNSSEC NX validation succeeded 152 queries with RTT 10-100ms 40 queries with RTT 100-500ms [View: _bind] ++ Cache DB RRsets ++ [View: internal (Cache: internal)] 2007 A 652 NS 131 CNAME 1 MX 32 TXT 421 AAAA 28 DS 244 RRSIG 110 NSEC 3 DNSKEY 2 !A 2 !TXT 89 !AAAA 2 !SPF 14 !DLV 148 NXDOMAIN [View: external (Cache: external)] 55 A 12 NS 34 AAAA 2 DS 10 RRSIG 1 DNSKEY [View: _bind (Cache: _bind)] ++ Socket I/O Statistics ++ 82958 UDP/IPv4 sockets opened 2118 UDP/IPv6 sockets opened 4 TCP/IPv4 sockets opened 1 TCP/IPv6 sockets opened 82956 UDP/IPv4 sockets closed 2117 UDP/IPv6 sockets closed 58 TCP/IPv4 sockets closed 15 UDP/IPv4 socket bind failures 2117 UDP/IPv6 socket connect failures 29554 UDP/IPv4 connections established 59 TCP/IPv4 connections accepted 2117 UDP/IPv6 send errors 5 UDP/IPv4 recv errors ++ Per Zone Query Statistics ++ --- Statistics Dump --- (1352931389)

    Read the article

< Previous Page | 733 734 735 736 737 738 739 740 741 742 743 744  | Next Page >