Search Results

Search found 4141 results on 166 pages for 'router'.

Page 74/166 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• Make a temp network.

  - by giodamelio

  I have a XAMPP test server running on my Windows Vista laptop. I also have a small wireless router. I would like be able to create a small temp network that could broadcast that network so any other computers connected to the wifi can go to localhost/ or an internal ip address and view my server. The router will not be able to be connected to the internet, but I don't see how that would make a difference Thanks giodamelio

  Read the article

• Routing between same network

  - by user1389735

  Hi In this scenario there is point -to point serial connection between R6 and R7 , there is router R10 whose interface F0/0 is having ip address of 10.1.1.2/24 and there is a host machine (R9) with ip address 10.1.1.1/24 which is running an application, My problem is that Application on R9 will only work when it will get its Gateway as 10.1.1.1/24 which is of router (R10) , is there any way i can make R6 and R7 transparent for R9 and R10, Or any type of routing using GRE / Route-map or any other way. Thanks in advace

  Read the article

• Addition of an Extra link to an existing link.

  - by Lawdricky

  I would like to know how to configure a extra link to my Mikrotik Routern or Cisco 3800 series router.In my office our bandwidth is 1mb, which is insufficient.But an extra 4mb was made available to us by a different ISP/hub.How do we integrate this new link into our existing link to boost our bandwidth (N.B it uses a private IP)?Our router has 2 interfaces:1 to the modem n the other to the switch.Kindly reply asap.

  Read the article

• How do the routers communicate with each other ?

  - by Berkay

  Let's say that i want make a request a to a web page which is hosted in Europe (i live in USA).My packets only consist the IP address of the web page, first the domain name to ip address transformation is done, then my packets start their journey through to europe. i assume that MAC addresses never used in this situation? are they? First, my packets deal with many routers on way how these routers communicate with each other?, are router addresses added to my packet headers ? Second, is there a specific path router to router comminication or which conditions affect this route? Third to cross the Atlantic Ocean, are cables used or... ?

  Read the article

• Generating Component SEF URLs in Joomla

  - by Jarrod

  I have a custom Joomla component and a router for building my SEF URL's for use within the site, and everything is usually shiny - internally, all of my links look and act fantastic. I recently route a controller action that sends a list of links through email, and I've noticed that my URLs are coming out.... funky - hopefully someone can tell me why. Usually, my router generates an internal link that looks like this: http://localhost/Registry/calendar/265889635/Some-Long-Boring-Event However, when I send an email and preparing the same URL through the same router I get: http://localhost/Registry/Registry/component/calendar/569555803/Some-Long-Boring-Event Has anybody run into this issue before?

  Read the article

• WCF MustUnderstand headers are not understood

  - by raghur

  Hello everyone, I am using a Java Web Service which is developed by one of our vendor which I really do not have any control over it. I have written a WCF router which the client application calls it and the router sends the message to the Java Web Service and returns the data back to the client. The issue what I am encountering is, I am successfully able to call the Java web service from the WCF router, but, I am getting the following exceptions back. Router config file is as follows: <customBinding> <binding name="SimpleWSPortBinding"> <!--<reliableSession maxPendingChannels="4" maxRetryCount="8" ordered="true" />--> <!--<mtomMessageEncoding messageVersion ="Soap12WSAddressing10" ></mtomMessageEncoding>--> <textMessageEncoding maxReadPoolSize="64" maxWritePoolSize="16" messageVersion="Soap12WSAddressing10" writeEncoding="utf-8" /> <httpTransport manualAddressing="false" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" allowCookies="false" authenticationScheme="Anonymous" bypassProxyOnLocal="true" keepAliveEnabled="true" maxBufferSize="65536" transferMode="Buffered" unsafeConnectionNtlmAuthentication="false"/> </binding> </customBinding> Test client config file <customBinding> <binding name="DocumentRepository_Binding_Soap12"> <!--<reliableSession maxPendingChannels="4" maxRetryCount="8" ordered="true" />--> <!--<mtomMessageEncoding messageVersion ="Soap12WSAddressing10" ></mtomMessageEncoding>--> <textMessageEncoding maxReadPoolSize="64" maxWritePoolSize="16" messageVersion="Soap12WSAddressing10" writeEncoding="utf-8"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> </textMessageEncoding> <httpTransport manualAddressing="false" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" allowCookies="false" authenticationScheme="Anonymous" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" keepAliveEnabled="true" maxBufferSize="65536" proxyAuthenticationScheme="Anonymous" realm="" transferMode="Buffered" unsafeConnectionNtlmAuthentication="false" useDefaultWebProxy="true" /> </binding> </customBinding> If I use the textMessageEncoding I am getting <soap:Text xml:lang="en">MustUnderstand headers: [{http://www.w3.org/2005/08/addressing}To, {http://www.w3.org/2005/08/addressing}Action] are not understood.</soap:Text> If I use mtomMessageEncoding I am getting The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature session shutdown or an internal server error. My Router class is as follows: [ServiceBehavior(InstanceContextMode = InstanceContextMode.Single, ConcurrencyMode = ConcurrencyMode.Multiple, AddressFilterMode = AddressFilterMode.Any, ValidateMustUnderstand = false)] public class EmployeeService : IEmployeeService { public System.ServiceModel.Channels.Message ProcessMessage(System.ServiceModel.Channels.Message requestMessage) { ChannelFactory<IEmployeeService> factory = new ChannelFactory<IEmployeeService>("client"); factory.Endpoint.Behaviors.Add(new MustUnderstandBehavior(false)); IEmployeeService proxy = factory.CreateChannel(); Message responseMessage = proxy.ProcessMessage(requestMessage); return responseMessage; } } The "client" in the above code under ChannelFactory is defined in the config file as: <client> <endpoint address="http://JavaWS/EmployeeService" binding="wsHttpBinding" bindingConfiguration="wsHttp" contract="EmployeeService.IEmployeeService" name="client" behaviorConfiguration="clientBehavior"> <headers> </headers> </endpoint> </client> Really appreciate your kind help. Thanks in advance, Raghu

  Read the article

• Maximize Your Quadcopter’s Range with a Wi-Fi Repeater

  - by Jason Fitzpatrick

  The majority of commercial quadcopters use Wi-Fi for remote control and suffer from a fairly limited range. This simple hack uses an Wi-Fi router as an extender to radically expand the range of your copter. There’s no heavy modification or code tweaking required, all you need is a power source for the router and the ability to set it up as a repeater. The extra signal boost provided by the repeater extends the range from an average of 50 meters to over 250 meters. Check out the video above to see it in action. If you’re looking for a more dependable but more labor intensive way to extend the range of your copter, you can also retrofit it with a traditional radio-controlled remote. [via Hack A Day] HTG Explains: Is UPnP a Security Risk? How to Monitor and Control Your Children’s Computer Usage on Windows 8 What Happened to Solitaire and Minesweeper in Windows 8?

  Read the article

• java.rmi.UnmarshalException: unable to pull client classes by server

  - by andrews

  Hi, I have an RMI client/server set-up on two machines that works fine in a simple situation when the server doesn't require a client-side defned class. However, when I need to use a class defined on the client side I am unable to have the server unmarshall those classes. I suspect this is an issue with my java.rmi.server.codebase property that I pass in as argument to the client app. I followed Sun's RMI Tutorial trail and I think I have followed the steps exactly except that I don't specify a classpath argument when executing client and server because they execute in the directory right above the root package directory (however I tried that too with no effect). The exceptions I get when attempting to execute the different client-side combinations described in detail below are all the same: RmiServer exception: java.rmi.ServerException: RemoteException occurred in server thread; nested exception is: java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is: java.lang.ClassNotFoundException: test.MyTask at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:353) at sun.rmi.transport.Transport$1.run(Transport.java:177) at java.security.AccessController.doPrivileged(Native Method) at sun.rmi.transport.Transport.serviceCall(Transport.java:173) at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:553) at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:808) at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:667) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) at java.lang.Thread.run(Thread.java:636) at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:255) at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:233) at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:142) at java.rmi.server.RemoteObjectInvocationHandler.invokeRemoteMethod(RemoteObjectInvocationHandler.java:178) at java.rmi.server.RemoteObjectInvocationHandler.invoke(RemoteObjectInvocationHandler.java:132) at $Proxy0.execute(Unknown Source) at test.myClient.main(myClient.java:32) The details are: My client/server rmi is set up over a home network behind a router. The router is assigned to a static ip address I will call myhostname. Appropriate port-mapping is set-up in the router that points to the right machines. role, machine, os, ip-address: server, venice, linux ubuntu 9.10, 10.0.1.2 client, naples, mac os x leopard, 10.0.1.4 I startup the server side as follows inside /home/andrews/workspace/epsilon/bin: 1 starting registry on the default port 1099: venice% rmiregistry & 2 starting web-server on port 2001 pointing to code base for common interfaces: venice% java webserver/ClassFileServer 2001 /home/andrew/workspace/epsilon/bin 3 starting server app (main class in test/myServer) which registers the server object: venice% java -Djava.rmi.server.codebase="http://myhostname:2001/" -Djava.security.policy=server.policy -Djava.rmi.server.hostname=myhostname test/myServer & Now the client side inside /Users/andrews/Development/Java/workspace/epsilon/bin: 1 start a local web server that can server client-side classes to the server (not sure if this is needed, but I added I tried it, and still no success; I have added port-mapping to the router for 2001 to venice, for 2002 to naples) naples$ java webserver/ClassFileServer 2002 /Users/andrews/Development/Java/workspace/epsilon/bin/ Trying to run the client (note: I don't specify the -cp argument because client executes right above the root package directory): 1 try #1 using an http hostname naples$ java -Djava.rmi.server.codebase=http://10.0.1.4:2002/ -Djava.security.policy=client.policy test.myClient myhostname Note 1: the myhostname argument at the end is passed-in to the client so that it resolves to server's rmi hostname. Note 2: I tried using localhost:2002 instead of 10.0.1.4:2002 too. Note 3: I tried using myhostname:2002 since myhostname is assigned to the router and I have proper port-mapping set-up, this address should resolve to naples and not venice 2 try #2: naples$ java -Djava.rmi.server.codebase=file:/Users/andrews/Development/Java/workspace/epsilon/bin/ -Djava.security.policy=client.policy test.myClient myhostname Note 1: the code base url format is correct, I created a small program to convert current file directory path into a url and used that. using file:///Users... has same effect. Other notes: 1 my server and client policy files correctly specify the path, as I've tested this setup with good and bad paths, and getting a security exception for bad path 2 this setup works if I don't use client-side defined objects, the client connects correctly to the server and the server executes. 3 when I place the client-side class on the server in the server's classpath, all executes fine. All help is appreciated.

  Read the article

• UBUNTU 12.04 Networking

  - by Fr. Lawrence winslow

  I have installed UBUNTU 12.04 on my Athlon 64-bit Desktop (2GB Memory) in a dual-boot with Win XP. The machine is hardwired to my D-Link N router which uses a DSL Modem to access the Internet. My Home Network was established in the router via the XP machine. When I boot UBUNTU I am able to access the Internet via this set-up but I can neither access the home network nor see the three other laptop computers (wireless access) on the network. These others are running Win Vista, Win 7, and UBUNTU 10.04 (this latter accesses the home network normally). All are visible and accessible when XP is running. I would appreciate thoughts as I am seriously thinking about changing all the computers to UBUNTU but do need to be able to operate the network.

  Read the article

• HTG Explains: Understanding Routers, Switches, and Network Hardware

  - by Jason Fitzpatrick

  Today we’re taking a look at the home networking hardware: what the individual pieces do, when you need them, and how best to deploy them. Read on to get a clearer picture of what you need to optimize your home network. When do you need a switch? A hub? What exactly does a router do? Do you need a router if you have a single computer? Network technology can be quite an arcane area of study but armed with the right terms and a general overview of how devices function on your home network you can deploy your network with confidence. HTG Explains: Understanding Routers, Switches, and Network Hardware How to Use Offline Files in Windows to Cache Your Networked Files Offline How to See What Web Sites Your Computer is Secretly Connecting To

  Read the article

• Making a bash script that reconnect to AP when connection lost

  - by Alexander

  I'm facing problems with WIFI on ubuntu i tried to update the system but still the same what happens is that i suddenly lose the connection with my router and when i press on the WIFI bar the system won't detect any APs i have to uncheck "enable WIFI" option ,then re check it so it work,it automatically reconnect. I'm thinking of making a bash script that detects when the pc is disconnected from the router for any reason, and when it is disconnected it disable then enable the wifi. i mean like automating resetting the connection that possible ? i guess i must use this nmcli nm wifi off nmcli nm wifi on but how can i make the script know if the PC is disconnected from the WIFI ?

  Read the article

• Critical Links: A small business IP PBX player to watch

  Combines VoIP with Wi-Fi router, network storage, and more&#151;with a special model designed expressly for the SOHO market.

  Read the article

• wakeonlan from remote host

  - by takeshin

  I have setup wake on lan service on my server. Everything works fine on local area network: root@server$: poweroff user@local$ wakeonlan AA:BB:CC:DD:EE:FF and the server wakes up. AA:BB:CC:DD:EE:FF is a MAC address of my server, which has IP 192.168.1.2 and hostname: example.com. It is connected to the router, which has IP 192.168.1.1 (public: xxx.xxx.xxx.xxx) When the server is up, I can ping: ping example.com or login via ssh: ssh [email protected] So far, so good. Now I'm able to wake the server up from local area, but how to wake the server from the remote location? I tried: user@local$ wakeonlan -i xxx.xxx.xxx.xxx AA:BB:CC:DD:EE:FF, but it does not work (nothing happens;). Do I have to configure my router somehow to forward magic packets? How?

  Read the article

• Can't ping Ubuntu laptop from my LAN

  - by oskar

  My laptop has Ubuntu 10.10 and is connected to my router with full internet access, yet I can't ping it from other computers on my LAN. I tried the following: I can successfully ping those other computers from my Ubuntu laptop, so I didn't accidentally connect to someone else's network. I can successfully ping my Ubuntu laptop from itself, though I don't know if that means anything. I haven't messed with iptables at all, so it currently doesn't have any rules set that would cause it to reject anything. I made a DHCP reservation for my laptop's MAC address in my router to make sure I was always using the correct IP address. Please note that I am using a "command line only" install of Ubuntu, so I can't use any GUI network config tools. The reason I want to ping it is because I am trying to run an NFS server on the laptop, yet despite correctly setting it up I cannot access the NFS volume on another computer because it isn't even visible on the network right now.

  Read the article

• Can't ping Ubuntu laptop from my LAN

  - by oskar

  My laptop has Ubuntu 10.10 and is connected to my router with full internet access, yet I can't ping it from other computers on my LAN. I tried the following: I can successfully ping those other computers from my Ubuntu laptop, so I didn't accidentally connect to someone else's network. I can successfully ping my Ubuntu laptop from itself, though I don't know if that means anything. I haven't messed with iptables at all, so it currently doesn't have any rules set that would cause it to reject anything. I made a DHCP reservation for my laptop's MAC address in my router to make sure I was always using the correct IP address. Please note that I am using a "command line only" install of Ubuntu, so I can't use any GUI network config tools. The reason I want to ping it is because I am trying to run an NFS server on the laptop, yet despite correctly setting it up I cannot access the NFS volume on another computer because it isn't even visible on the network right now.

  Read the article

• UPnP with ushare to an xbox 360 arcade

  - by josephdavidrich115

  I am looking for sharing things like a folder with ushare. I got the program running with xbox to play the music but it crashes through a song. Does anyone know how to fix it? My router is echolife (it came with the talktalk broadband). It looks like a picture frame you find it if you live in the UK. Just want to ask if it can be fixed or if it is a router problem. Do I need to configure anything in ushare?

  Read the article

• How to configure Xchat and IRC server to transfer files?

  - by takeshin

  How do I configure Xchat to send files? My setup: hardware router: xxx.xxx.xxx.xxx example.com | Ubuntu Server with IRC server: 192.168.1.2 Local machines: 192.168.1.x My aim is to allow to send files between the local machines. By now, they are able to talk on the local IRC channel. which ports do I need to open on the router? what do I need to configure on the server? how to configure XChat on the clients? how to troubleshoot/debug the problems?

  Read the article

• How to share internet connection and making the client accessible over the lan

  - by Dario Silva Moran

  I've a Pc with Ubuntu 14.04 connected to a linkys router through wlan0, and I'd like to share internet connection to an AVR with ethernet port. This is pretty simple if only internet connection is required for the AVR: actually, creating an ethernet connection as "Shared with other computers" and setting up the AVR IP configuration to use DHCP works just fine, but that makes a private class A lan between those two; of course ip addresses are not in the range of the LAN the router is managing. So, I tried with static ip on both sides (Ubuntu eth0 and AVR ip). Tried many combinations, none of them work to provide Internet access to the AVR and at the same time make the AVR accessible over the network through his static ip address (say, 192.168.0.110). Any tips around to share??

  Read the article

• BSNL Routers: Default Username and Password To Access Admin Interface

  - by Gopinath

  Problem You have BSNL broadband set up at home and everything is working fine. But one fine day you something went wrong or you would like to change the properties of your BSNL modem by logging in to the admin user interface of your modem. What is the default username and password to login to BSNL Router user interface? Solution Here are the default username, password to access your BSNL router admin interface URL: http://192.168.1.1/ Username: admin Password: admin Note: The above username and password are the default ones that works with all the BSNL routers until unless someone has changed them. This article titled,BSNL Routers: Default Username and Password To Access Admin Interface, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Review: 8 Great Linux Routers, from SOHO to Enterprise

  Eric Geier rounds up eight Linux router projects with a little something for everyone, from Internet gateways for home users to enterprise Cisco replacements.

  Read the article

• LAN visibility and network sharing

  - by takeshin

  I have two Ubuntu machines with wifi network cards configured as DHCP interfaces. machine1: inet addr:192.168.168.105 Bcast:192.168.168.255 Mask:255.255.255.0 Gateway: 192.168.168.252 machine2: inet addr:192.168.168.104 Bcast:192.168.168.255 Mask:255.255.255.0 Gateway: 192.168.168.252 They are connected to the router: inet addr: 192.168.168.252 Internet connection from the router is accessible on both of the machines. How to share files between those two? I have already tried few ways (eg. samba), but it looks like the machines are not visible to each other: @machine1$: ping 192.168.168.104 From 192.168.168.105 icmp_seq=1 Destination Host Unreachable What do I need to configure? Apparmor? Firewall?

  Read the article

• Nodes can't connect to server after bootstrap

  - by user84471

  I installed maas and I was able to add nodes and they became in ready state. I executed: juju bootstrap And then one of my nodes is waking up and I receive this message on server (after juju status): And this message is shown on node after it wakes up: I am doing this several times and each time I receive the same result. I think something is wrong with my network. It look like this: internet <-> router <-> switch <-> nodes | |<----->server Router is used as a DHCP Server. It's ip is 192.168.0.1 - it's my default gateway. When I was installing maas server I installed dnsmasq and I have used as a range 192.168.0.5-192.158.0.200 and for gateway I used 192.168.0.1 and for domain I used nothing. I was able to add nodes without problems. What maybe the problem not letting nodes to connect to maas server?

  Read the article

• Ubuntu 10.04, I cannot get my computer to connect to the internet

  - by Jared Isaacson

  So at first I was unable to get my Belkin Surf & Share usb to install on my computer, so then I plugged my computer directly into my router and my computer won't acknowledge any connection. I know very little about how to use ubuntu, please help me. What I do know is: I'm using Ubuntu 10.04 Lucid Lynx In my 'edit connections', I go into 'wired' tab, select "wired connection 1" then 'edit' it brings up 4 tab options: Wired (I input the MAC address that's printed on the bottom of my router, MTU is set to automatic) 802.1x Security (currently: not checked) IPv4 Settings (currently: Automatic (DHCP) addresses only) IPv6 Settings (currently: Automatic)

  Read the article

• How can I host a website on a dynamically-assigned IP address?

  - by nick

  I recently upgraded my internet to the point that it is much faster and more reliable than my current webhost. I would like to move my current domain to be hosted at home, but my IP address is dynamic. As far as I know, I only get a new IP when I restart my modem and or router (which is almost never) or when cable one (my ISP) pushes out a firmware update (rarely). There are a few ways I can see doing this: Convince my ISP to give me a static IP Assign my router my current IP to force a static IP (which might work?) Set my DNS record to my current IP address and update it on the rare occasions that it changes. Obviously I'm hoping that the first one works, but I don't want to pay a lot of extra money (if that's what it takes) to get a static IP address. Which of these options will work most reliably?

  Read the article

• Slow internet browsing in Ubuntu

  - by Mark

  I have a dual boot set up with windows and ubuntu, when I'm using windows internet browsing is a lot faster than when I'm using ubuntu and I don't know why. It's like there's just a big latency rather than the maximum speed is lower, there's a big delay before anything happens when using Ubuntu, it happens with all websites all the time. I've never configured the internet connection because it just worked straight away. I have broadband connection through a router shared with some other computers, when we set up the router and internet connection everything was done with windows. Any ideas on what I could do to fix this? Thanks to anyone who replies.

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >