Search Results

Search found 4141 results on 166 pages for 'router'.

Page 70/166 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• How can i access windows XP remote desktop on private IP from internet?

  - by Jennie

  So the machine is behind a DSL router on a private IP so that it can not receive inbound requests. I want to know: Is there anyway to setup the router NAT (i highly doubt it supports one to one port mapping) without disturbing other users on the same router. I have another machine on internet which has public IP on it without any firewall. Can i use this machine as a relay server so that to initiate the connection, the XP machine send an outbound request and this relay server makes my connection through and then i can access my machine on pvt ip without any problem. Please tell??

  Read the article

• Port Forwarding for Remote Desktop

  - by Vaibhav Bajpai

  I have two Mac notebooks at home, I have assigned them static private IPs. I have also set my router to a DynDNS address, which updates everytime my router gets a new public IP. I have enabled Screen Sharing on both notebooks. I can successfully goto my router webpage using the DynDNS address. I understand I need to port-forward to get Screen Sharing to work from outside. Lets assume, notebooks have private IP 192.168.1.2 and 192.168.1.3 I am kind of lost here, would appreciate some help (I need to be able remote desktop to both notebooks)

  Read the article

• switch duplicates packets and forward in two route

  - by sami

  there is a network including a router, two hosts and a switch which connects hosts to router. i have a virtual machine on my system. the network adapter is set to act as bridge. so the virtual machine and real OS are my 2 hosts on different LAN. they use one network card and are connected to a switch. when each of host send a packet to the other one, the switch duplicate the packet and forward it to both router and the other host. how can I solve the duplicate packet problem? Thanks.

  Read the article

• Dynamic to static internal IP address (Snow Leopard server)

  - by bac

  I purchased a new Mac mini server, since my old iMac, which was a server pretty much died. My problem is this. How do I change my internal IP address for my mac mini server to a static address, like 192.168.0.2? Before you guys harp on me, my old server was running Ubuntu Hardy and I only had to map the IP address in the router, which would automatically assign the reserved address through DHCP. Now, I know things are different between the two, but my problem is that the mac is not accepting the assigned IP address or the router just is not assigning. However, every time I have manually changed it on the Mac to an address of my choice, it takes the computer off the Internet. My router is a NetGear WTG624 v2, I believe. I need this to work, so I can utilize Dynamic DNS.

  Read the article

• Connecting a print/file server with no wired access

  - by PeanutsMonkey

  We currently have a printer server which also serves as a file server. The server is located on premise however is not close to any wired access point i.e. a patch panel or point. The server also requires access to the Internet as it transmits files across. We have a wireless modem and a wireless router. I can run a cable between the server and wireless router. How can I have the wireless router communicate with the wireless modem? If the operating system of the server is concerned, it is running Windows Server 2003.

  Read the article

• Remotedesktop to windows 2008 server with 2 nics

  - by The_Mo

  Hi I have 2 NICs on a Windows 2008 R2 Server. nic1 with ip address 192.168.2.1 with gatewaty 192.168.2.254 and nic2 with ip address 10.96.6.253 with no gateway. The windows 2008 server is connected to a router which is connnected to another router so if I want to connect to the windows 2008 server I use 192.168.0.31 because it is forwarded. If I use remote desktop to connect to that machine I use 192.168.0.31 and that works well, but the server has a seccond nic and I want to be able to connect with a remotedesktop to nic2. Any help appreciated! [server windows 2008 r2 192.168.2.1] -- [router 192.168.2.254/192.168.0.31] -- [my computer 192.168.0.13 gateway 192.168.0.254]

  Read the article

• routing weirdness - traceroute 'vanishes' en route

  - by The Journeyman geek

  I'm attempting to set up one of my boxes as a server (again), but i'm having some odd connection issues- the box itself connects fine to the internet, but trying to connect to my external ip address seems to result in the trace getting 'lost' partway. http://pastebin.com/HCQAGbvn - this is a traceroute from another system that's connected to another ISP - starhub is my own one, while i have another system that i have access to on singtel. I'm wondering if my ISP is messing around with routing, or is something very odd going on. As you note, the traceroute dosen't reach me, but if it helps, i use a dd-wrt router. edit: Facepalmishly, turning the firewall on my router on and off fixed it. I don't get why it dropped off at different ip addresses each time, or why the router set it self to block.. everything, or why it affected the ipv6 tunnel as well.

  Read the article

• Wireless only connects to Google

  - by dmanxiii

  I am using a netgear wireless router to connect to create a wireless network. When connected to the router via an Ethernet cable everything works correctly. When connecting to the router via wireless only Google can be accessed. I've done searches via Google using random words to make sure that it is not a cached page, and these all work. However, trying to connect to any non Google domain the page fails to load. I've accessed the connection with two different laptops, both are running Windows Vista. The network connection is strong on both, but the issue persists for both. Edit: I have configured the wireless networks name and password, and connect to that using the credentials I have defined. I am sure I am not connecting to a neighbors wireless network. Edit2: Typing in the direct IP address for CNN.com ( http://157.166.255.19 ) would not resolve.

  Read the article

• Access port on machine by connecting to other machine via SSH?

  - by piquadrat

  I have to access my home router's web interface on port 80. Unfortunately, the only way into the network I have at the moment is SSH to another machine on the same network. me ---|---SSH Box----Home Router My Google foo seems to have abandoned me, I couldn't didn't find anything helpful. Any ideas? Thanks! To clarify: I'm not at home right now. I do however have access to one machine on the network (a QNAP NAS) over SSH. I need to access the home router web interface on port 80 from my notebook which is outside of the home network.

  Read the article

• How to show what proxies/firewalls are enabled on Windows XP?

  - by Stephen Melrose

  Hi, I'm trying to fix a Windows XP PC that is having a strange problem. The computer can't seem to connect to the internet, even though an internet connection is present. The router and internet is working fine as I've connected a laptop to it via LAN and wireless and both worked fine. The PC in question is connected to the router as it has an IP from the DHCP. The problem is I can't connect to nor ping any internet address from the PC. I can't even connect to the router admin itself. I've tried both LAN ports in the PC, same problem and both. I'm assuming there's a proxy or firewall on the PC stopping the connections, I just don't know how to find them or see which one is causing the issue. So my question is how do I on Windows XP display the system proxy settings and/or any firewalls that are running? Cheers.

  Read the article

• Is it possible to host a web server from behind a NAT

  - by iamrohitbanga

  My PC is behind a NAT router that has a public IP address. If I want to host a website then I believe I need a domain name which I can purchase from some site which would pledge to resolve all DNS requests for that domain name and send the IP address of my NAT router (assuming I do not want to host my domain name on their servers). Now I want to host a web server on my computer. What changes should be done to the NAT router's configuration to forward all HTTP requests for example.com to my PC in the internal network. Is the above strategy correct? Is it commonly used?

  Read the article

• Can't Remote into Windows Server

  - by Brian

  Hello, I have a Dell server wired into the router. I was able to connect to it with my laptop (laptop is wireless) before my router died. My verizon router went kaput, and I got everything else back up and running on the wireless network other than the remoting in feature, even though I can access the server through windows explorer just fine. Any ideas why? What do I need to check? UPDATE: Interesting scenario, Network Discovery is off; I turn it on and save, but for some reason, even after that, network discovery is turning itself off... no idea why that is happening? Thanks.

  Read the article

• Linking two networks that have a common device

  - by Serban Razvan

  I recently bought a Samsung Smart TV having in mind to connect it to the Internet. Because my router is very far from it and not wanting to buy an expensive wireless for the TV, I created a homemade solution. I have the laptop (an smartphone and the PC) connected to the router which is connected to the internet. I shared the laptop's wireless connection to the ethernet port which I connected to the TV. So far, the TV is connected to the internet, but is there any way to make him part of the router's network instead of the 2 devices network (the laptop and the TV)?

  Read the article

• Proxying/Tunneling IPSec traffic via netcat or SOCKS?

  - by MattC

  I have a client that is using a SonicWall router as their VPN concentrator. I downloaded the client software and set up the router as a peer. My issue is that my company uses a dual DMZ setup, meaning we have an interior firewall, then a bunch of DMZ servers, then an external firewall, then finally the telco router. In this setup, the interior firewall has no way to communicate with the exterior firewall since they are on two totally separate subnets. The communication occurs through the servers that straddle the networks. In this case, I need some way to forward the ISAKMP/IPSec traffic from my desktop out to the Internet. My usual trick of using netcat on the intermediate proxy server doesn't work here since it's not TCP/UDP traffic as far as I can tell. All of my previous experience with VPN's have been using SSL-based VPN's which are clearly very easily proxy-able. Any help would be appreciated, thanks!

  Read the article

• Dns works, can ping, but cannot load web pages in browser

  - by user1224595

  Yesterday I changed routers, and my desktop computer started acting up. I could ping websites, and nslookup was able to resolve names to addresses, but neither chrome, firefox, nor ie could load any webpages. None of my other computers connected to the same wireless router have any problems. I connect my desktop to the router through a cheap wifi dongle. I did a wireshark capture of the browser request, and I have uploaded the pcap here. https://drive.google.com/file/d/0B7AsPdhWc-SwbTV0bUJLQXo4UUE/edit?usp=sharing One strange thing I noticed was the spamming of ssdp packets. I am not super familiar with networking, but it seems that it is not a problem with the router, as dns works, and so does dhcp (the desktop is assigned an address correctly). Any help would be appreciated.

  Read the article

• Using m0n0wall in a VM for testing.

  - by tombull89

  I'd like to use m0n0wall inside a (VirtualBox) VM to play about with and see what it can do. Ultimately the goal is to have a number of virtual machines connected to a internal virtual network which goes through to the m0n0wall VM, and then the m0n0wall box connected to the internet through NAT or a bridged addaptor on my host machine. I can find out how to set the LAN and WAN addresses, but this seems to be only for using m0n0wall as a router intead of attached to another router. Let's see if I can diagram this: [Virtual Machine]---Internal (VM Only) Network ---[m0n0wall VM]---Bridged/NAT Addaptor---["real" router]---Internet. Can anybody suggest how I should do this or am I thinking m0n0wall isn't meant to be used like this?

  Read the article

• Iptables: masquarading and routing

  - by nixnotwin

  I have a WAN router which is linked to isp over a /30 WAN subnet. But it also servers as a router to a /29 local public WAN subnet which is connected to few of my servers. The traffic from /29 gets routed to ISP via /30 subnet. For a wired reason I want to masqarade (NAT) the interface which has /30 ip. So the interface with /30 ip should appear as masquaraded for my 192.168.1.0/24 network and it also should act as a normal non-NAT router for my WAN public subnet /29. Can this be done with iptables on a Linux machine?

  Read the article

• Can't connect printer wirelessly to linksys wrt54g using WPS

  - by Mark J Seger

  I've already blown over 1/2 day on this. I keep checking and rechecking my router settings and they agree with what the documentation says for my brand new HP4620 printer. Supposedly I just tell the router to listen for connections and tell the printer to connect. It fails every time! Further, I have also read some opinions that when things are not configured correctly the linksys will disable WPS and it looks like that's happening as well. Further, it's causing other wireless devices in my house to lose there connectivity until I re-enable WPA networking on the router. Has anyone been here before? This is driving me crazy... -mark

  Read the article

• Ubuntu 12.04 Transparent proxy gateway

  - by user146536

  i have a ubuntu server which i want to use as a transparent proxy, (i have no issue setting up squid, just the iptables. The server only has one network interface. The server sits on the same subnet as the router which is the current gateway to the internet for clients, i want to simply set the gateway on the clients pointing at the transparent proxy which in turn forwards the requests to the router and off to the internet. See me diagram, can anybody offer to help with the iptables configuration to achieve this scenario? subnet mask /22 Router(10.4.12.1) Transparent Proxy (eth0, 10.4.12.2) | | +----+----+---------+----+----+ | | | | Comp1(10.4.12.6) Comp2(10.4.12.5) Comp3(10.4.12.4) Comp4(10.4.12.3) Thanks

  Read the article

• Unable to ping between subnets and out to internet

  - by battlemidget

  My setup is Modem - Linksys router - Laptop with 2 devices (wlan0/eth0) - desktop machine Router is 192.168.1.1 gateway to the internet Laptop wlan0 is 192.168.1.4 with a gw of 192.168.1.1 Laptop eth0 is 192.168.2.254 which acts as a second gateway desktop is 192.168.2.100 On laptop i've setup ip_forward to 1, and have inserted 2 iptables rules -A FORWARD -i eth0 -o wlan0 -j ACCEPT -A FORWARD -i wlan0 -o eth0 -j ACCEPT The laptop can ping outside the network (i,e, yahoo.com) it can not ping 192.168.2.100. The desktop can ping 192.168.2.254 but nothing outside the network or 192.168.1.0 subnet. On laptop ip route show lists: 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.254 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.4 127.0.0.0/8 dev lo scope link default via 192.168.1.1 dev wlan0 What am I missing to make my desktop go through the laptop in order to access the router which provides access to the internet? Thanks

  Read the article

• Uploading to YouTube makes all browser tabs and devices disconnect

  - by fabsenet

  Whenever I upload a video to YouTube all other browser tabs behave like there is no connection at all. It even affects my phone and other computers on the network therefor I think it has to do with my router. When the upload is done everything works normally again. I never observed this behavior with any other upload. My router is a Fritz!Box 7390 and my uploading PC is connected through a 1000mb/s switch (wired) to the router. Uploading through another browser does not change anything. I understand that other sites become slow as the network resources are limited, but stopping altogether feels wrong. speed.io measures for my internet connection: 40.894 Kbit/s down, 2.685 Kbit/s up, 29 ms ping, 2.048 con/m connects

  Read the article

• Combine VPN bandwith over two or more WAN connections? Load balancing?

  - by mistrfu

  Imagine you only have DSL with 5mbps Down and 2mbps Up. Is it possible to have 10 of these for example and combine them in a way that would increase the upstrean bandwidth to one server? In my head it works like this: intranet with one gateway/router router connected to multi wan load ballancer on each ballancer wan port router with vpn clinet set up, tunneling to a server ?some? software on the server in cloud joining all these connection into one interface again I would need this mostly for big uploads to a server, downlink to the office is not that important at all. Does it even make sense? I drew an image to clarify.

  Read the article

• How do I set up my home server to go directly to a port other than 80

  - by Kevin

  I'm using dyndns, a lynksis wt54g router, and tomcat 7 with spring to set up a web server. This is my first time to attempt this. I'm sure this is a very common question, but I don't know enough to find the answer after quite a bit searching. Dyndns is successfully forwarding to my ip. The main problem is, the router admin login is coming up when my url is used. I'm hosting my site on port 8080. I have port forwarding set up for port 8080 but my request times out when I attempt to use my url like this www.myurl1234.com:8080. I don't want users to have to type the port anyway. I also tried changing the management port to 82 and hosting on port 80, but I still get the router admin login when I use my url. Where am I going wrong? Can I set it up so that www.myurl1234.com goes straight to port 8080?

  Read the article

• RDC not working from outside

  - by Cotten

  I've set up Remote Connection according to : http://windows.microsoft.com/is-IS/windows7/allow-remote-desktop-connections-from-outside-your-home-network That is, Allow remote connections to the computer you want to access. Make sure Remote Desktop is able to communicate through your firewall. Find the IP address of the computer on your home network that you want to connect to. Open your router's configuration screen and forward TCP port 3389 to the destination computer's IP address. Find your router's public IP address so that Remote Desktop can find it on the Internet. When I'm inside the LAN, RDC works flawlessly. When I try to connect to the ip given by my ISP it cannot connect. I've setup port forwarding for 3389 on my netgear router. Thanks!

  Read the article

• Tool to allow Kerberos Authenticated users to modify Firewall settings

  - by Lars Hanke

  I run a firewall on a central router. Recently, several users want to use Skype. Since firewalling Skype virtually means to switch the firewall off, I consider to allow users to temporarily punch holes for their system. Since the users have no accounts on the router, I consider using Kerberos for authentication and authorization. The router is a Debian Squeeze box, with minimal configuration, i.e. no web-server, database or similar gimmicks. Does anyone know an existing solution, which could be used for that purpose? Or does anybody know easy to use and well documented frameworks in say Perl, Python, C, C++, ... making the set-up of a Kerberos authenticated Client and Server application really simple?

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >