Search Results

Search found 9208 results on 369 pages for 'space monkey'.

Page 74/369 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

  • Missing MB on a GPT partioned SSD

    - by pisswillis
    I recently installed Arch Linux on an Intel 40GB SSD. I used GPT for partioning (via GNU parted) and created the following partions: /dev/sda1 : 1 MB, no FS, flag=bios_grub /dev/sda2 : 30MB, /boot, ext2, flag=boot /dev/sda3 : 20GB, /home, ext4 /dev/sda4 : ~20GB, /, ext4 After struggling to install grub2 from the livecd environment (which I finally did via grub-install /dev/sda --root-directory=/mnt/ --no-floppy --force) I got a working system. However, when I was inspecting disk usage with df I noticed that my home partition had around 170MB of used space on it. This surprised me because the only things on /home were one users .bashrc, .bash_history, and .lesshst. du confirmed that there was only a few KB of space being used on /home. Why does df report approximately 170MB being used when du does not? Is this space "gone forever", or can I regain it by repartioning and/or reinstalling? When I installed grub2 it said something along the lines of "your embed area is too small", and that I could "use BLOCKLISTS, but BLOCKLISTS are UNRELIABLE". In the end the only way I could get a system booting from the SSD was to use blocklists via the grub-install --force flag. Is this related to the mysterious missing 170MB? Thanks

    Read the article

  • mysqld crashes on any statement

    - by ??iu
    I restarted my slave to change configuration settings to skip reverse hostname lookup on connecting and to enable the slow query log. I edited /etc/my.cnf making only these changes, then restarted mysqld with /etc/init.d/mysql restart All appeared to be well but when I connect to msyqld remotely or locally though it connects okay a slight problem is that mysqld crashes whenever you try to issue any kind of statement. The client looks like: Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 Server version: 5.1.31-1ubuntu2-log Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> show tables; ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... Connection id: 1 Current database: mydb ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away Bus error The mysqld error log looks like: 101210 16:35:51 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:35:51 InnoDB: Assertion failure in thread 140245598570832 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:35:51 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=3 max_threads=600 threads_connected=3 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18209220 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f8d791580d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f902a76a080] /lib/libc.so.6(gsignal+0x35) [0x7f90291f8fb5] /lib/libc.so.6(abort+0x183) [0x7f90291fabc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f902a7623ba] /lib/libc.so.6(clone+0x6d) [0x7f90292abfcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18213c70 = thd->thread_id=3 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:35:51 mysqld_safe Number of processes running now: 0 101210 16:35:51 mysqld_safe mysqld restarted InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 101210 16:35:54 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 101210 16:35:56 InnoDB: Started; log sequence number 456 143528628 101210 16:35:56 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 16:35:56 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 16:35:56 [Note] Event Scheduler: Loaded 0 events 101210 16:35:56 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 16:36:11 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:36:11 InnoDB: Assertion failure in thread 139955151501648 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:36:11 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18588720 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f49d916f0d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f4c8a73f080] /lib/libc.so.6(gsignal+0x35) [0x7f4c891cdfb5] /lib/libc.so.6(abort+0x183) [0x7f4c891cfbc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f4c8a7373ba] /lib/libc.so.6(clone+0x6d) [0x7f4c89280fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18599950 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:36:11 mysqld_safe Number of processes running now: 0 101210 16:36:11 mysqld_safe mysqld restarted The config is [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] innodb_file_per_table innodb_buffer_pool_size=10G innodb_log_buffer_size=4M innodb_flush_log_at_trx_commit=2 innodb_thread_concurrency=8 skip-slave-start server-id=3 # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /DB2/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 128K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 600 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 32M # skip-federated slow-query-log skip-name-resolve Update: I followed the instructions as per http://dev.mysql.com/doc/refman/5.1/en/forcing-innodb-recovery.html and set innodb_force_recovery = 4 and the logs are showing a different error but the behavior is still the same: 101210 19:14:15 mysqld_safe mysqld restarted 101210 19:14:19 InnoDB: Started; log sequence number 456 143528628 InnoDB: !!! innodb_force_recovery is set to 4 !!! 101210 19:14:19 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 19:14:19 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 19:14:19 [Note] Event Scheduler: Loaded 0 events 101210 19:14:19 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 19:14:32 InnoDB: error: space object of table mydb/__twitter_friend, InnoDB: space id 1602 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/access_request, InnoDB: space id 1318 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/activity, InnoDB: space id 1595 did not exist in memory. Retrying an open. 101210 19:14:32 - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x1753c070 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f7a0b5800d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f7cbc350080] /usr/sbin/mysqld(ha_innobase::innobase_get_index(unsigned int)+0x46) [0x77c516] /usr/sbin/mysqld(ha_innobase::innobase_initialize_autoinc()+0x40) [0x77c640] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x3f3) [0x781f23] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f7cbc3483ba] /lib/libc.so.6(clone+0x6d) [0x7f7cbae91fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x1754d690 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash.

    Read the article

  • Unexpected(?) high 'wasted' memory in memcached

    - by Nanne
    Looking at our memcached stats I think I have found an issue I was not aware of before. It seems that we have a strangely high amount of wasted space. I checked with phpmemcacheadmin for a change, and found this image staring at me: Now I was under the impression that the worst-case scenario would be that there is 50% waste, although I am the first to admit not knowing all the details. I have read - amongst others- this page which is indeed somewhat old, but so is our version of memcached. I think I do understand how the system works (e.g.) I believe, but I have a hard time understanding how we could get to 76% wasted space. The eviction rate that phpmemcacheadmin shows is 2 ev/s, so there is some problem here. The primary question is: what can I do to fix this. I could throw more memory at it (there is some extra available I think), maybe I should fiddle with the slab config (is that even possible with this version?), maybe there are other options? Upgrading the memcached version is not a quickly available option. The secondairy question, out of curiosity, is of course if the rate of 75% (and rising) wasted space is expected, and if so, why. System: This is currently not something I can do anything about, I know the memcached version isn't the newest, but these are the cards I've been dealt. Memcached 1.4.5 Apache 2.2.17 PHP 5.3.5

    Read the article

  • How do I batch-downsize images on linux, while keeping small images small?

    - by Gabriel
    I have a whole lot of photos and it's time to clean up the mess and free some disk space. I know mogrify is great to batch-resize things down. The problem is, in some directories I have small images mixed with the big ones. I'd like to batch-downsize all the big one but not upsize the small ones. As an example, I have a rep with tens of MBs-pictures in the 3000x2000s. Some of them I have already downsized so I could email them. They may be 1024x768. I'd like to downsize the big ones to 1600x1200, a disk-space-to-quality tradeoff I like. But then, with mogrify or convert, the small ones will be upsized, which would be a waste of disk space. I found some tricky ways to use identify with cut and some scripting to filter the small pics out and mogrify the others, but man, there's got a way to tell mogrify not to upsize my pics... How ? Is there some other tool better suited ?

    Read the article

  • Regarding partitions for dual-booting Ubuntu with pre-existing Windows 7

    - by Shasteriskt
    I have zero actual experience with configuring disk partitions and the stuff I have read for the past few hours have been confusing me a bit, so please bear with me. First of all, I'd like to explain what I'm setting to achieve: Windows 7 with: C:\ Windows 7 (pre-existing installation) D:\ Data (Already exists and has files already) Ubuntu 11 - Does not exist yet, but I already have a LiveCD in hand. \root directory for Ubuntu \home on its own partition I plan \swap on its own partition with around 8GB Here is the current situation: I have a single 500 GB hard-disk with Windows 7 x64 installed, and the current partition schemes is as follows: System Reserved: 100 MB (Primary, Active) C: 100 GB - Where Windows 7 is installed (Primary) D: 365 GB - Where my files are located, LOTS of free space (Primary) Now, I would like to shrink my D: drive and create around 40 GB of unallocated disk space for the Ubuntu installation, but here what's confusing me a bit: I'm thinking I would create an extended partition and subdivide it into 3 logical partitions for the Ubuntu setup I had in mind. (If you think my setup is a bad idea, please let me know & why. I also hope you can suggest a better one...) I am aware that I can only have up to 4 primary partitions, or 3 primary partitions with 1 extended parition max. Now, does the System Recovery portion count as one primary partition? I'm really new to these things and it is totally unclear to me. In shrinking my D: drive using Windows 7's Disk Management tool, I would get an unallocated free space which I don't know how to make an extended partition from. It seems like I can only create a primary partition from it, not an extended one. How do I go about it? (I'd also like to note, if it is of any importance, that I am trying to avoid using the option to install Ubuntu alongside Windows, and much rather prefer using the custom install where I can specify which drives I wish to use and stuff. Somehow I feel its safer that way.)

    Read the article

  • Disk doesn't contain a valid partition table

    - by Jeevan Dongre
    I was running a m1.small instance ec2 ubuntu instance. I was running out of disk space, so I upgraded my instance to medium. When I upgraded I actually got 429.5 GB of space and after that I added 10 gb of volume too. When I run the "sudo fdisk -l" command I got this results. Disk /dev/sda1: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda1 doesn't contain a valid partition table Disk /dev/sda2: 429.5 GB, 429461078016 bytes 255 heads, 63 sectors/track, 52212 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda2 doesn't contain a valid partition table Disk /dev/sdf: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 sda1 is the primary parition and sda2 is what I got added upgrading my system to medium. But the problem persists, I am not able to pull the code from git, it is giving me this error. remote: Counting objects: 409, done. remote: Compressing objects: 100% (236/236), done. fatal: write error: No space left on device fatal: index-pack failed

    Read the article

  • Live Messenger SimilarityTable2 file

    - by adrianbanks
    I am trying to free up some space on my laptop's hard disk and am using a tool (SpaceMonger) that will show me a treemap of the whole disk. The problem I have comes from Live Messenger's SimilarityTable2 file. I have no idea what it is for, but I know that it is a sparse file, meaning that it shows as taking up 8GB of disk space, but actually only takes up 132KB of space on disk. The problem is that because SpaceMonger thinks this file is 8GB, it swamps the other files and takes up most of the treemap, making it hard to see the other files that really are large. Is this file safe to delete? If not, how do I make its actual size on disk match its reserved size? If that's not possible, how can I make SpaceMonger (or another treemap tool) use the real size of the file and not the reserved size? EDIT: I've just realised that I have some NTFS junctions set up, meaning that the same set of directories appear twice. Is there any way to stop this happening as well?

    Read the article

  • What does it mean to install two OS's alongside each other?

    - by Josh
    I currently have Windows 7 installed on my PC. However, I just tried out Ubuntu via booting from a disc and I love it. I want to install it onto my HDD, but I don't want to get rid of Windows 7. I know HOW to do this, but I am a little unsure what the consequences might be. What does it mean to install Ubuntu alongside Windows? Do they share the same resources? Also, I have my HDD already partitioned into two sections, a 70 GB section where Windows is installed and then another 400 GB section where all my data is stored. There is currently 26 GB free on the 70GB partition. I know Ubuntu doesn't take up much space. However, if I install Ubuntu in that space, will I still be able to install programs on Windows in the future? My main concern is that I am going to short-change my hard drive space for future installations. EDIT: I guess another big question I have is if I install a program on one OS, will the other be able to use it?

    Read the article

  • How to start MSSQL Server with corrupt model db

    - by Jordan McGuigan
    After moving some databases around (restoring, deleting, etc) we experienced an issue creating new databases. Specifically, When trying to create a new database MSSQL Server it failed because the "The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run". As some online solutions suggested, we tried to Start and Stop the MSSQL Service. Service would not restart because "Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive" (FYI: the drive has 100gb of free space). Tried restarting the machine the MSSQL Server is running on. When the server came back online, we received the same error. We have tried deleting tempdb.mdf and restoring the modeldb from the templates folder, but neither of these solved the issue. We are unable to connect to the database, even in single user mode. Many of the online solutions have us running SQL commands against the server, but we are unable to connect (even in single user mode) to the DB to run commands against the server. Specific error messages: Database 'model' cannot be opened. It is in the middle of a restore. (Microsoft SQL Server, Error: 927) The SQL Server (MSSQLSERVER) service is starting. The SQL Server (MSSQLSERVER) service could not be started. A service specific error occurred: 1814. We need the server up and running again ASAP.

    Read the article

  • Using multiple USB webcams in Linux

    - by rachelderp
    Running more than one USB webcam in Debian/Linux results in the the following error: libv4l2: error turning on stream: No space left on device VIDIOC_STREAMON: No space left on device What initially seemed to be a programming issue in OpenCV turned into a quest for a mysterious hardware/software problem after the same errors were produced by running cheese and xawtv. Apparently it's caused by webcams requesting all the available bandwidth on the USB host controller. With that in mind I decided to run wireshark and capinfos to see just how much bandwidth a single camera used. 4 megabits per second at 320x240 14 megabits per second at 640x480 32 megabits per second at 1920x1080 Interesting! That might explain why two cameras at 320x240 work but any higher resolution fails. It's as if my USB controller is only operating at USB 1 speeds, yet lsusb shows both webcams belonging to a device which supposedly supports 480 megabits per second. One solution proposed forcing the webcams to calculate their bandwidth usage instead of requesting their maximum by running the following commands: sudo rmmod uvcvideo sudo modprobe uvcvideo quirks=128 Unfortunately that made no difference, so I decided to try another solution. A post on StackOverflow suggested telling my webcams to use a lower FPS or compressed video format like MJPEG, but after running v4lctl list it doesn't appear either of my webcams support changing their video mode. And that's where I'm stuck. Why would two webcams operating well below the maximum speed of USB 2 would produce this error? ps: It's not a disk space issue, df displays no change when the webcams are started. pps: If it makes a difference, here's the output of lsusb

    Read the article

  • Can't create system image. 0x80780119 error after upgrade from 8 to 8.1

    - by cichy202
    I have upgraded my Windows 8 PC to 8.1 yesterday and it seemed like everything is working fine until I tried to create System Image. I got an error 0x80780119 saying that there is to little space on one of the partitions. I started looking into this problem and indeed one of the partitions does not meet the requirements. There are following partitions on my drive: DISKPART> list partition Partition ### Type Size Offset ------------- ---------------- ------- ------- Partition 1 Recovery 300 MB 1024 KB Partition 2 System 100 MB 301 MB Partition 3 Reserved 128 MB 401 MB Partition 4 Primary 74 GB 529 MB Partition 5 Primary 390 GB 75 GB Partition 1 has only 13MB free space. Partition 2 has 70MB free space, partition 3 is MSFTRES, partition 4 is my C drive with around 35GB free and partition 5 is not included in system image. Partitions were create like this during installation of Windows 8 - clean install from scratch. I am using UEFI so the drive is GPT formatted. So I thought, OK I can resize my C drive a little, move the partitions and expand the 1st one. I tried using GParted but it is not able to move the MSFTRES partition. It does not recognize the file system on it. So the question is: Is it possible to "clean up" the 1st partition in anyway? If not, is there anything special about MSFTRES partition? Or can I just remove it and create it a little further and just flag it as msftres with GParted?

    Read the article

  • Killing a process which ran for a lot of time or is using a lot of memory

    - by Vedant Terkar
    I am not sure whether this question belong to Stack Overflow or here, but here we go. I am designing a online 'C' compiler, which will compile and invoke the program if compilation succeeded. So here is code which I am using for that: $str=shell_exec("gcc path/to/file.c -o path/to/file.exe 2>&1"); if(file_exists("path/to/file.exe")){ $res=shell_exec("path/to/file.exe <inputfile 2>&1"); echo $res; } This Seems to work fine with simple program files. But When file.c That is the source code entered contains Infinite loop then This script crashes the server and utilizes a lot of memory and time. So here is my question: Is There any way to detect for how much time does the process file.exe is Running? How Much Space is Utilized by that process that is file.exe? Is There any way to kill the process file.exe if space and time utilization increases beyond certain limit? That Mean if we allocate time of 2.5sec and space of 40Mb at max for that process file.exe and if any one of those 2 constraints is violated then we should display appropriate error message to client Is it possible? I am Using WAMP (Windows 7).

    Read the article

  • How can I extend / create a new partition from the following setup?

    - by Kiada
    I'm a little unsure what to do in this situation. When I try to create a new simple volume from the unallocated space I get an error because I already have 4 partitions. I have no option to extend either my C:\ primary partition or the E:\ logical drive. C:\ - Gaming Win7 install. D:\ - Storage Unallocated Space - Would somehow like to install OSX on a partition from this space. E:\ - Software Development Win7 install. I:\ - Ignore this. It's an external 1TB HDD. Do I have any options that do not involve formatting / losing information on either C:\ or E:\? Thank you. Link to visual disk partitioning setup image. Edit: A bit more information regarding partitions. Firstly, the image linked above is a screenshot of Windows 7 partitioning tool, easier to read than text I guess! H:\ System Reserved: 100MB NTFS C:\ 244 GB NTFS Healthy (Page File, Primary Partition) D:\ 294 GB NTFS Healthy (Primary Partition) E:\ 100 GB NTFS Healthy (Boot, Page File, Crash Dump, Logical Drive) Unallocated 292 GB Hope this helps :)

    Read the article

  • Restore only one partition of Windows Backup

    - by VitoShadow
    I have a MacBook Pro with an HD partitioned. This HD was divided in two partitions: the first was about 650 GB, with OS X installed, and the second one (created with BootCamp Assistant) was about 100 GB, with Windows 7 installed. I needed more space for Windows, so I decided to backup the Windows partition using the Windows backup tool, from Control Panel. I created an image of my partition, stored it in an external HD, and now I'm trying to use it. In order to give more space to Windows, I formatted the HD, and recreate a new partition table, with the first partition of about 250 GB (with OS X) and the second of the exactly size of the previous partition in which was installed Windows (about 100 GB); thre rest was empty space. In the second, I tried to restore the Windows backup. I plugged in the Windows Installation CD (with the HD with the backup connected to the computer), and select the option "Repair your computer". Then, I choose the image of the backup (automatically recognized), and I try to restore it. The problem is that now the System Recovery Tool wants to format all the HD, in order to install only Windows! In this way, I should lose everything, also the MacOS partition! Is there a way to install the backup only in the Windows partition?

    Read the article

  • build error with boost spirit grammar (boost 1.43 and g++ 4.4.1)

    - by lurscher
    I'm having issues getting a small spirit/qi grammar to compile. The build stack trace is fugly enought to not make any sense to me (despite some assertion_failed i could notice in there but that didn't brought much information) the input grammar header: inputGrammar.h #include <boost/config/warning_disable.hpp> #include <boost/spirit/include/qi.hpp> #include <boost/spirit/include/phoenix_core.hpp> #include <boost/spirit/include/phoenix_operator.hpp> #include <boost/spirit/include/phoenix_fusion.hpp> #include <boost/spirit/include/phoenix_stl.hpp> #include <boost/fusion/include/adapt_struct.hpp> #include <boost/variant/recursive_variant.hpp> #include <boost/foreach.hpp> #include <iostream> #include <fstream> #include <string> #include <vector> namespace sp = boost::spirit; namespace qi = boost::spirit::qi; using namespace boost::spirit::ascii; //using namespace boost::spirit::arg_names; namespace fusion = boost::fusion; namespace phoenix = boost::phoenix; using phoenix::at_c; using phoenix::push_back; template< typename Iterator , typename ExpressionAST > struct InputGrammar : qi::grammar<Iterator, ExpressionAST(), space_type> { InputGrammar() : InputGrammar::base_type( block ) { tag = sp::lexeme[+(alpha) [sp::_val += sp::_1]];//[+(char_ - '<') [_val += _1]]; block = sp::lit("block") [ at_c<0>(sp::_val) = sp::_1] >> "(" >> *instruction[ push_back( at_c<1>(sp::_val) , sp::_1 ) ] >> ")"; command = tag [ at_c<0>(sp::_val) = sp::_1] >> "(" >> *instruction [ push_back( at_c<1>(sp::_val) , sp::_1 )] >> ")"; instruction = ( command | tag ) [sp::_val = sp::_1]; } qi::rule< Iterator , std::string() , space_type > tag; qi::rule< Iterator , ExpressionAST() , space_type > block; qi::rule< Iterator , ExpressionAST() , space_type > function_def; qi::rule< Iterator , ExpressionAST() , space_type > command; qi::rule< Iterator , ExpressionAST() , space_type > instruction; }; the test build program: i seems the build fails at qi::phrase_parse, i am using boost 1.43 and g++ 4.4.1 #include <iostream> #include <string> #include <vector> using namespace std; //my grammar #include <InputGrammar.h> struct MockExpressionNode { std::string name; std::vector< MockExpressionNode > operands; typedef std::vector< MockExpressionNode >::iterator iterator; typedef std::vector< MockExpressionNode >::const_iterator const_iterator; iterator begin() { return operands.begin(); } const_iterator begin() const { return operands.begin(); } iterator end() { return operands.end(); } const_iterator end() const { return operands.end(); } bool is_leaf() const { return ( operands.begin() == operands.end() ); } }; BOOST_FUSION_ADAPT_STRUCT( MockExpressionNode, (std::string, name) (std::vector<MockExpressionNode>, operands) ) int const tabsize = 4; void tab(int indent) { for (int i = 0; i < indent; ++i) std::cout << ' '; } template< typename ExpressionNode > struct ExpressionNodePrinter { ExpressionNodePrinter(int indent = 0) : indent(indent) { } void operator()(ExpressionNode const& node) const { cout << " tag: " << node.name << endl; for (int i=0 ; i < node.operands.size() ; i++ ) { tab( indent ); cout << " arg "<<i<<": "; ExpressionNodePrinter(indent + 2)( node.operands[i]); cout << endl; } } int indent; }; int test() { MockExpressionNode root; InputGrammar< string::const_iterator , MockExpressionNode > g(); std::string litA = "litA"; std::string litB = "litB"; std::string litC = "litC"; std::string litD = "litD"; std::string litE = "litE"; std::string litF = "litF"; std::string source = litA+"( "+litB+" ,"+litC+" , "+ litD+" ( "+litE+", "+litF+" ) "+ " )"; string::const_iterator iter = source.begin(); string::const_iterator end = source.end(); bool r = qi::phrase_parse( iter , end , g , root , space ); ExpressionNodePrinter< MockExpressionNode > np; np( root ); }; int main() { test(); } finally, the build error is the following: /usr/bin/make -f nbproject/Makefile-linux_amd64_devel.mk SUBPROJECTS= .build-conf make[1]: se ingresa al directorio `/home/mineq/NetBeansProjects/InputParserTests' /usr/bin/make -f nbproject/Makefile-linux_amd64_devel.mk dist/linux_amd64_devel/GNU-Linux-x86/vpuinputparsertests make[2]: se ingresa al directorio `/home/mineq/NetBeansProjects/InputParserTests' mkdir -p build/linux_amd64_devel/GNU-Linux-x86 rm -f build/linux_amd64_devel/GNU-Linux-x86/tests_main.o.d g++ `llvm-config --cxxflags` `pkg-config --cflags unittest-cpp` `pkg-config --cflags boost-1.43` `pkg-config --cflags boost-coroutines` -c -g -I../InputParser -MMD -MP -MF build/linux_amd64_devel/GNU-Linux-x86/tests_main.o.d -o build/linux_amd64_devel/GNU-Linux-x86/tests_main.o tests_main.cpp from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto.hpp:16, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp: In function ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’: In file included from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/detail/parse_auto.hpp:14, /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:99: error: no matching function for call to ‘assertion_failed(mpl_::failed************ (boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]::error_invalid_expression::************)(InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode> (*)()))’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:100: error: no matching function for call to ‘assertion_failed(mpl_::failed************ (boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]::error_invalid_expression::************)(MockExpressionNode))’ from /home/mineq/third_party/boost_1_43_0/boost/proto/proto.hpp:12, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/support/meta_compiler.hpp:17, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/meta_compiler.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/action/action.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/action.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:14, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/proto/detail/expr0.hpp: At global scope: /home/mineq/third_party/boost_1_43_0/boost/proto/proto_fwd.hpp: In instantiation of ‘boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()>, 0l>’: In file included from /home/mineq/third_party/boost_1_43_0/boost/proto/core.hpp:13, /home/mineq/third_party/boost_1_43_0/boost/utility/enable_if.hpp:59: instantiated from ‘boost::disable_if<boost::proto::result_of::is_expr<boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()>, 0l>, void>, void>’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/support/meta_compiler.hpp:200: instantiated from ‘boost::spirit::result_of::compile<boost::spirit::qi::domain, InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), boost::fusion::unused_type, void>’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:107: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/proto/detail/expr0.hpp:64: error: field ‘boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()>, 0l>::child0’ invalidly declared function type from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto.hpp:16, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp: In function ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’: In file included from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/detail/parse_auto.hpp:14, /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:107: error: request for member ‘parse’ in ‘boost::spirit::compile [with Domain = boost::spirit::qi::domain, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()](((InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode> (&)())((InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode> (*)())expr)))’, which is of non-class type ‘InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>()’ from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi.hpp:15, from /home/mineq/third_party/boost_1_43_0/boost/spirit/include/qi.hpp:16, from ../InputParser/InputGrammar.h:12, from tests_main.cpp:14: /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/skip_over.hpp: In function ‘void boost::spirit::qi::skip_over(Iterator&, const Iterator&, const T&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, T = boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]::skipper_type]’: In file included from /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/auto/auto.hpp:19, /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:112: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, boost::spirit::qi::skip_flag::enum_type, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::proto::exprns_::expr<boost::proto::tag::terminal, boost::proto::argsns_::term<boost::spirit::tag::char_code<boost::spirit::tag::space, boost::spirit::char_encoding::ascii> >, 0l>]’ /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/parse.hpp:125: instantiated from ‘bool boost::spirit::qi::phrase_parse(Iterator&, Iterator, const Expr&, const Skipper&, Attr&) [with Iterator = __gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, Expr = InputGrammar<__gnu_cxx::__normal_iterator<const char*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, MockExpressionNode>(), Skipper = MockExpressionNode, Attr = const boost::spirit::ascii::space_type]’ tests_main.cpp:206: instantiated from here /home/mineq/third_party/boost_1_43_0/boost/spirit/home/qi/skip_over.hpp:27: error: ‘const struct MockExpressionNode’ has no member named ‘parse’ make[2]: *** [build/linux_amd64_devel/GNU-Linux-x86/tests_main.o] Error 1 make[2]: se sale del directorio `/home/mineq/NetBeansProjects/InputParserTests' make[1]: *** [.build-conf] Error 2 make[1]: se sale del directorio `/home/mineq/NetBeansProjects/InputParserTests' make: *** [.build-impl] Error 2 BUILD FAILED (exit value 2, total time: 1m 48s)

    Read the article

  • How to find long running transactions in Websphere MQ Series?

    - by raistlin
    In a J2EE environment the MQ server log shows the following: Process(954584.5) User(mqm) Program(amqzmuc0) AMQ7469: Transactions rolled back to release log space. .... While increasing the logfile size/space might be a temporary solution, the definitive solution must be to identify the culprit process/queue that causes this long transaction. Is there any solution/tool for this? Note: MQ is used via JMS only

    Read the article

  • How do you adjust the frame or vertical alignment of a UIBarButtonItem contained by a UIToolbar inst

    - by akaii
    Horizontal positioning of UIBarButtonItems is no problem, I can simply pad the space with fixed/flexible space items. However, I can't seem to adjust the toolbar item vertically. UIToolbar has no alignment property, and UIBarButtonItem has no way of setting its frame. I need to do this because we're using a mix of custom icons created using initWithImage, and standard icons created with initWithBarButtonSystemItem. The custom icons aren't being centered properly (they're offset upwards, relative to the system icons, which are centered properly), so the toolbar looks awkward.

    Read the article

  • Do fluent interfaces violate the Law of Demeter?

    - by Jakub Šturc
    The wikipedia article about Law of Demeter says: The law can be stated simply as "use only one dot". However a simple example of a fluent interface may look like this: static void Main(string[] args) { new ZRLabs.Yael.Pipeline("cat.jpg") .Rotate(90) .Watermark("Monkey") .RoundCorners(100, Color.Bisque) .Save("test.png"); } So does this goes together?

    Read the article

  • TreeView Root Node Style

    - by ScG
    I have a tree view <asp:TreeView ID="TreeView1" runat="server" DataSourceID="SiteMapDataSource1" ShowExpandCollapse="False"> </asp:TreeView> As you can see, root node is hidden. However when the treenode gets rendered, there is a whitespace to the left of each leafnode. This is probably because the root node is hidden but is taking up space. How do i remove that white space.

    Read the article

  • How to read values from file. tokenizer

    - by user69514
    I have a file in which each line contains two numbers. The problem is that the two number are separated by a space, but the space can be any number of blank spaces. either one, two, or more. I want to read the line and store each of the numbers in a variable, but I'm not sure how to tokenize it. i.e 1 5 3 2 5 6 3 4 83 54 23 23 32 88 8 203

    Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >