Search Results

Search found 4860 results on 195 pages for 'sudo petruza'.

Page 74/195 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• Grub doesn't show both Ubuntu installations

  - by jackweirdy

  I have a laptop with Ubuntu 12.04 LTS installed as the main OS. The other day I installed Ubuntu-Studio (version 12.04) into another partition on the machine. The installation went great and when the machine booted, the grub menu popped up and I could see the option for Ubuntu Studio and the vanilla Ubuntu OS'. The problem was that this version of grub, installed by the Studio installer, didn't look great and insisted on putting Studio at the top of the list, and therefore as the main OS to boot. I use the standard Ubuntu more often, so I booted into that and ran sudo grub-install dev/sda. That worked OK and now Ubuntu boots as normal. Only problem is that the Grub menu doesn't show up and doesn't give me a chance to choose the other OS. Running sudo os-prober shows that it can find ubuntu studio, it doesn't give me a chance to boot it. Any ideas as to how I can fix this problem? Cheers in advance. EDIT: followed instructions here and saw the boot menu, but the only boot options present were for the standard installation of Ubuntu.

  Read the article

• Ubuntu Server 13.10 can't mount hard drive that is on my router

  - by Keytachi626

  So I am working currently with my Ubuntu server which I have it on my laptop at the moment so I can test out how to work with the server OS. I have it up and running with samba, openSSH, webmin, and plexmedia server. My problem is that I can't seem to get the server to get to the router hard drive. I have a TP-link wdr3500. The format of the hard drive is a FAT32. What I've tried: install cifs. sudo vi /etc/fstab Type out \\ \tplinklogin.net\volume1 \mnt\media cifs guest 0 0 I have also tried out \\\192.168.0.1\volume1 \mnt\media cifs guest 0 0 But then when I go to terminal and do sudo mount -a, I usually get a error saying wrong fs type, bad option, bad superblock on //ipaddress/dns/volume1 , missing codepage or helper program, or other error. But in dmesg it will say unable to determine destination address. So am I doing something wrong here? I can't install the hard drive on to my laptop since my family is constantly using it to transfer data back and forth on it and they get mad at me if I just take it away.

  Read the article

• Google earth will not reinstall

  - by chad

  I was trying to perform the the fix found at this link http://www.omgubuntu.co.uk/2012/01/how-to-make-google-earth-look-native-in-ubuntu It requires you to delete certain files from the /opt/google/earth/free folder and then add some new ones that you download. I deleted the files but the links to download the new ones were unusable. I was using gksudo nautilus so trash was disabled meaning I could not restore the files I had deleted. I the tried to go to the Google Earth website and reinstall it. I downloaded the .deb but when I tried to install it it gav me an error message saying "cannot install ia32-libs" I tried installing this via terminal and it gave me an error message saying chad@chad-Lenovo-G570:~$ sudo apt-get install ia32-libs [sudo] password for chad: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: ia32-libs : Depends: ia32-libs-multiarch E: Unable to correct problems, you have held broken packages. How do I fix this? Now I am stuck without a functioning Google Earth. How can I fix this?

  Read the article

• Ubuntu 13.10 Installing MariaDB

  - by Ecaz

  I have tried everything to install MariaDB on this clean Ubuntu installation but I keep getting this error, Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-5.5 (= 5.5.33a+maria-1~saucy) but it is not going to be installed E: Unable to correct problems, you have held broken packages. I have followed this guide to try and install it, http://www.unixmen.com/install-lemp-server-nginx-mysql-mariadb-php-ubuntu-13-10-server/ And I have also followed the "official" guide on the MariaDB downloads page for 13.10 https://downloads.mariadb.org/mariadb/repositories/ But nothing seems to be working. Edit 1 I have tried both How do I resolve unmet dependencies? and How to install MariaDB? but it still gives me the error I posted above. It's a fresh Ubuntu install with hardly anything installed. Edit 2 All the check boxes are ticket in Updates. I ran: sudo apt-get update && sudo apt-get -f install mariadb-server-5.5"=5.5.33a+maria-1~saucy" And it gave me this error: The following packages have unmet dependencies: mariadb-server-5.5 : Depends: mariadb-client-5.5 (>= 5.5.33a+maria-1~saucy) but it is not going to be installed Depends: mariadb-server-core-5.5 (>= 5.5.33a+maria-1~saucy) but it is not going to be installed E: Unable to correct problems, you have held broken packages.

  Read the article

• Host is unreacheble with static networking configuration via /etc/network/interfaces while GUI NetworkManager is ok

  - by Riccardo

  I have some trouble setting-up the network interface using the static IP configuration. I run ubuntu 12.04 kernel 3.11.0-22 with the back-ports enabled. I followed these instructions from help.ubuntu.com but there seems to exist some conflict between the GUI approach (NetworkManager) and the command line approach. $ sudo nano /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.1.1.50 gateway 10.1.1.10 netmask 255.255.255.0 dns-nameservers 192.168.3.45 192.168.8.10 $ sudo /etc/init.d/networking restart I than try to ping for example google.com ping -c 3 www.google.com the response is that the host is unreachable. The icon on the top right of the desktop says: wired network disconnected. If I work using the GUI approach (Edit Connections and so on...) all works great. Can same one explain to me where I wrong? $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 90:e6:ba:07:4a:77 inet addr:10.1.1.50 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::92e6:baff:fe07:4a77/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:39619 errors:0 dropped:0 overruns:0 frame:0 TX packets:18520 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:19030895 (19.0 MB) TX bytes:2768769 (2.7 MB) $ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0

  Read the article

• Can't install Apache 2.2.22 on Ubuntu 13.10

  - by B18C1

  My work environment requires Apache 2.2.22 instead of the latest version of 2.4. My machine is currently running Ubuntu 13.10. When I use Synaptic or apt-get it will not allow me to choose an older version of Apache than 2.4. So my question is, how can I force an install of Apache 2.2.22 on Ubuntu 13.10 using Synaptic or apt-get. When I do try to specify the version I get the following: sudo apt-get install apache2=2.2.22-1ubuntu1 [sudo] password for b18c1: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: apache2 : Depends: apache2-mpm-worker (= 2.2.22-1ubuntu1) but it is not going to installed or apache2-mpm-prefork (= 2.2.22-1ubuntu1) but it is not going to be installed or apache2-mpm-event (= 2.2.22-1ubuntu1) but it is not going to be installed or apache2-mpm-itk (= 2.2.22-1ubuntu1) but it is not going to be installed Depends: apache2.2-common (= 2.2.22-1ubuntu1) but it is not going to be installed E: Unable to correct problems, you have held broken packages.

  Read the article

• SD Card Reader not working in Ubuntu 12.04

  - by tripkane

  I have a read many other posts on this issue and believe that Ubuntu 12.04 is not even recognizing my SD Card Reader as just that: Computer Model: Metabox (Australian builder of Clevo laptops) / Clevo P150EM OS: Ubuntu 12.04 (64 Bit) CPU: Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz HD: 120GB Intel 550/520MB/s SSD According to the people who built my computer, the specs of the SD Card reader in my comp are as follows: Manufacture: Realtek Semiconduct Corp. Location: PCI bus 3 Hardware ID: PCI\Ven_10EC&DEV_5289&SUBSYS_51051558 Physical device object name: \Device\NTPNP_PCI0015 Here are the relevant outputs of the following commands run from the terminal: sudo lshw *-generic UNCLAIMED description: Unassigned class product: Realtek Semiconductor Co., Ltd. vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list configuration: latency=0 resources: memory:f6a00000-f6a0ffff sudo lspci -v -nn 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5289] (rev 01) Subsystem: CLEVO/KAPOK Computer Device [1558:5105] Flags: bus master, fast devsel, latency 0, IRQ 4 Memory at f6a00000 (32-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [b0] MSI-X: Enable- Count=1 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00 Does the unassigned details of these outputs mean that Ubunutu desn't know that the SD Card Reader is one and what do with it? and if so how should I go about fixing it?? Cheers ;)

  Read the article

• Fix Package is in a very bad inconsistent state

  - by Benjamin Piller

  I can't update my system because it freezes while installing a third-party update (zramswap-enabler)!! Sometimes I get the following message in Update manager: Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message: E:The package zramswap-enabler needs to be reinstalled, but I can't find an archive for it. I tried to remove the zramswap-enabler, but it's impossible because I get the following message: dpkg: error processing zramswap-enabler (--remove): Package is in a very bad inconsistent state - you should reinstall it before attempting a removal. Errors were encountered while processing: zramswap-enabler E: Sub-process /usr/bin/dpkg returned an error code (1) Actually i would really reinstall that package, but it is unable to do it! If i remove this third-party PPA then the system is warning me about a very very serious problem. So why can i not install/reinstall/remove/update this package and why freezes the updater if i try to update? -S O L U T I O N-: Okay! Finally i found the solution for this Problem! Step 1. Make sure that your PPA is correctly Step 2. Remove the broken package via the following command: sudo dpkg --remove --force-remove-reinstreq zramswap-enabler Step 3. install the package again (sudo apt-get install zramswap-enabler) Step 4. After restart (not necessary) you are able to install the updates correctly! Actually you can fix any "Package is in a very bad inconsistent state” Issues with this solution!!!

  Read the article

• Burned CD-R are not identical to the input iso image, why?

  - by Grumbel

  I have the issue that sometimes when I burn an iso image to a CD-R with: sudo wodim -v driveropts=burnfree -data dev=/dev/scd0 input.iso And then read it back out again with: sudo dd if=/dev/cdrom of=output.iso dd: reading `/dev/cdrom': Input/output error ... That I end up with two iso images that are not identical, namely the output.iso is missing 2048 bytes at the end. When I however mount the iso image or CD-R and compare the actual files on the mountpoint, both are identical. Is that expected behavior or is that an actually incorrect burn of the data? And if its expected, how can I verify that the burn process was successful? The reason why I ask in the first place is that it seems to be reproducible behavior, certain iso images come out 2048 bytes short, even on repeated burns, but all burned CD-Rs are under themselves identical. Also what is the reason behind the: dd: reading `/dev/cdrom': Input/output error As it happens always, I assume it is normal, but what is the technical reason behind it? I assume CDs don't allow the device to detect the size directly, so dd reads till it encounters the end the hard way. Edit: User karol on superusers.com mentioned that both the size issue and the read error are the result of using -tao (default) in wodim instead of -dao mode. I couldn't yet test it, but it sounds like the most plausible explanation so far.

  Read the article

• Problems with mounting .ISO files

  - by user89599

  I'm using Precise, with GNOME. I've attempted to install some retro, multi-cd games (KOTOR1) via .ISO images and WINE, but I can't get the ISO's to mount correctly. First I tried GMountISO, which showed a read-only warning but worked - until I went to unmount. When the installation program asked for CD 2 I couldn't unmount from the /cdrom folder because neither GMountISO or umount from terminal could detect the mount. After a reboot, I changed to GISOMount (different somehow, I guess?), but when I attempt to mount the ISO I get an error window explaining the syntax of the mount command and, which is also what I get when I attempt to use mount from terminal. After checking /media from terminal on a lark I see the disc mounted there twice over, but umount won't recognize it, even when I specify the full path sudo umount /media/KOTOR_1.iso. It cleared up upon reboot. Can someone please assist? UPDATE :: Thanks for the quick response. What's weird, is the images are like stuck in limbo... I'll show you: sc@sc-HP-110-3700:/media$ ls cdrom KOTOR_1(0)(vcd) KOTOR_1(vcd) sc@sc-HP-110-3700:/media$ cd cdrom sc@sc-HP-110-3700:/media/cdrom$ ls sc@sc-HP-110-3700:/media/cdrom$ cd .. sc@sc-HP-110-3700:/media$ umount KOTOR_1(vcd) bash: syntax error near unexpected token `(' sc@sc-HP-110-3700:/media$ umount KOTOR_1.ISO umount: KOTOR_1.ISO is not mounted (according to mtab) sc@sc-HP-110-3700:/media$ sudo umount -a umount: /run/shm: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) umount: /run: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) umount: /dev: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) umount: /: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) sc@sc-HP-110-3700:/media$

  Read the article

• nano syntax highlighting not working for all languages

  - by Dejan

  I have a funny situation where I am unable to add custom highlighting definitions to my nano text editor. The funny thing is that the predefined work like a charm and can be edited. But I have created a new one for js with $ sudo touch js.nanorc $ sudo nano js.nanorc my current js.nanorc looks like this: syntax "JavaScript" "\.js$" color blue "\<[-+]?([1-9][0-9]*|0[0-7]*|0x[0-9a-fA-F]+)([uU][lL]?|[lL][uU]?)?\>" color blue "\<[-+]?([0-9]+\.[0-9]*|[0-9]*\.[0-9]+)([EePp][+-]?[0-9]+)?[fFlL]?" color blue "\<[-+]?([0-9]+[EePp][+-]?[0-9]+)[fFlL]?" color brightblue "[A-Za-z_][A-Za-z0-9_]*[[:space:]]*[(]" color black "[(]" color cyan "\<(break|case|catch|continue|default|delete|do|else|finally)\>" color cyan "\<(for|function|get|if|in|instanceof|new|return|set|switch)\>" color cyan "\<(switch|this|throw|try|typeof|var|void|while|with)\>" color cyan "\<(null|undefined|NaN)\>" color brightcyan "\<(true|false)\>" color green "\<(Array|Boolean|Date|Enumerator|Error|Function|Math)\>" color green "\<(Number|Object|RegExp|String)\>" color red "[-+/*=<>!~%?:&|]" color magenta "/[^*]([^/]|(\\/))*[^\\]/[gim]*" color yellow ""(\\.|[^"])*"|'(\\.|[^'])*'" color magenta "\\[0-7][0-7]?[0-7]?|\\x[0-9a-fA-F]+|\\[bfnrt'"\?\\]" color brightblack "(^|[[:space:]])//.*" color brightblack start="/\*" end="\*/" color brightwhite,cyan "TODO:?" color ,green "[[:space:]]+$" color ,red " +" If anyone can see the problem then please tel me

  Read the article

• Ubuntu 13.10 Installing MariaDB when Apt reports MariaDB has unmet dependencies or broken packages

  - by Ecaz

  I have tried everything to install MariaDB on this clean Ubuntu installation but I keep getting this error, Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: mariadb-server : Depends: mariadb-server-5.5 (= 5.5.33a+maria-1~saucy) but it is not going to be installed E: Unable to correct problems, you have held broken packages. I have followed this guide to try and install it, http://www.unixmen.com/install-lemp-server-nginx-mysql-mariadb-php-ubuntu-13-10-server/ And I have also followed the "official" guide on the MariaDB downloads page for 13.10 https://downloads.mariadb.org/mariadb/repositories/ But nothing seems to be working. Edit 1 I have tried both How do I resolve unmet dependencies? and How to install MariaDB? but it still gives me the error I posted above. It's a fresh Ubuntu install with hardly anything installed. Edit 2 All the check boxes are ticket in Updates. I ran: sudo apt-get update && sudo apt-get -f install mariadb-server-5.5"=5.5.33a+maria-1~saucy" And it gave me this error: The following packages have unmet dependencies: mariadb-server-5.5 : Depends: mariadb-client-5.5 (>= 5.5.33a+maria-1~saucy) but it is not going to be installed Depends: mariadb-server-core-5.5 (>= 5.5.33a+maria-1~saucy) but it is not going to be installed E: Unable to correct problems, you have held broken packages.

  Read the article

• How can I roll back xserver-xorg-core and xserver-common?

  - by Ville Sundberg

  A recent update to Xorg broke my desktop, which now looks like this: http://i.imgur.com/PbBxh.jpg In short, the desktop background is not updating on the secondary display. (And if there is no secondary display, the primary display background stops updating.) Looking into the history, I found that this happened right after upgrading two packages: xserver-xorg-core xserver-common These were upgraded to 1.9.0-0ubuntu7.3. I'd like to downgrade these packages. How do I do that? I've checked that both have another version in the maverick repo: xserver-xorg-core: Installed: 2:1.9.0-0ubuntu7.3 Candidate: 2:1.9.0-0ubuntu7.3 Version table: *** 2:1.9.0-0ubuntu7.3 0 500 http://fi.archive.ubuntu.com/ubuntu/ maverick-updates/main amd64 Packages 100 /var/lib/dpkg/status 2:1.9.0-0ubuntu7 0 500 http://fi.archive.ubuntu.com/ubuntu/ maverick/main amd64 Packages However, apt won't let me downgrade them: ville@fluxx ~ % sudo apt-get install xserver-common=2:1.9.0-0ubuntu7 xserver-xorg-core=2:1.9.0-0ubuntu7 The following packages have unmet dependencies: xserver-xorg-core : Depends: xserver-xorg but it is not going to be installed E: Broken packages And this is the reason: ville@fluxx ~ % sudo apt-get install xserver-common=2:1.9.0-0ubuntu7 xserver-xorg-core=2:1.9.0-0ubuntu7 xserver-xorg-core The following packages have unmet dependencies: xserver-xorg-core : Depends: xserver-common (>= 2:1.9.0-0ubuntu7.3) but 2:1.9.0-0ubuntu7 is to be installed E: Broken packages Am I out of options here?

  Read the article

• Wireless shows up as disabled, how can I get it working?

  - by Lazer

  $ sudo iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off pan0 no wireless extensions. $ This is what pops up when I click the two computers icon What should I do to get Wifi working on this machine? $ sudo ifconfig wlan0 up SIOCSIFFLAGS: No such file or directory $ $ lspci | tail 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series] 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) $

  Read the article

• Wireless shows up as disabled, how can I get it working?

  - by Lazer

  $ sudo iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off pan0 no wireless extensions. $ This is what pops up when I click the two computers icon What should I do to get Wifi working on this machine? $ sudo ifconfig wlan0 up SIOCSIFFLAGS: No such file or directory $ $ lspci | tail 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series] 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) $

  Read the article

• NTFS partitions mount as root instead of user as set in /etc/fstab

  - by G1bs0n

  I recently upgraded a server to Ubuntu 12.04 with a fresh install and my NTFS partitions won't mount as user at boot but I can mount them as user manually from the console with $ sudo mount -a. Using ntfsfix reports no problems and chkdisk sees nothing wrong under Windows 7. Are the drives not ready to be mounted at boot and default to root instead of user for some reason? Here is my /etc/fstab: UUID=E4E6B30CE6B2DDCC /media/Bowles ntfs-3g defaults,uid=1000,gid=1000,umask=022 0 0 UUID=A040C42340C3FDD2 /media/Burroughs ntfs-3g defaults,uid=1000,gid=1000,umask=022 0 0 UUID=EA022C73022C46C3 /media/DoctorGonzo ntfs-3g defaults,uid=1000,gid=1000,umask=022 0 0 UUID=BA425A384259FA19 /media/Geist ntfs-3g defaults,uid=1000,gid=1000,umask=022 0 0 UUID=E87CFAE57CFAAE06 /media/DouglasAdams ntfs-3g defaults,uid=1000,gid=1000,umask=022 0 0 Here is the output of ls -l after boot: drwxr-xr-x 1 xbmc xbmc 4096 Oct 31 21:46 Bowles drwxrwxr-x 1 root users 8192 Oct 31 21:46 Burroughs drwxrwxr-x 1 root users 4096 Oct 28 21:45 DoctorGonzo drwxrwxr-x 1 root users 12288 Oct 31 19:56 DouglasAdams drwxrwxr-x 1 root users 4096 Nov 3 01:03 Geist If I unmount and mount again with $ sudo mount -a from console, the output of ls -l: drwxr-xr-x 1 xbmc xbmc 4096 Oct 31 21:46 Bowles drwxr-xr-x 1 xbmc xbmc 8192 Oct 31 21:46 Burroughs drwxr-xr-x 1 xbmc xbmc 4096 Oct 28 21:45 DoctorGonzo drwxr-xr-x 1 xbmc xbmc 12288 Oct 31 19:56 DouglasAdams drwxr-xr-x 1 xbmc xbmc 4096 Nov 3 01:03 Geist Update I was fooling myself, I had a custom udev rule set up to auto-mount file systems by label for USB drives, borrowed from here, but didn't update the rule to accommodate for my additional hard drives. Updating the rule to auto-mount only drives after /dev/sde solved my problem. Thank you again for your reply cartoonist.

  Read the article

• Ubuntu 12.04 problem with E160 huawei - can't detect the device and freezing system

  - by Matt

  I have just installed 12.04 and plugged in E160 and nothing happened - modem doesn't mount. I have found this solution : Ubuntu does not mount some Huawei devices due to bugs, problems etc. See if these work: 1st option: Connect the USB modem. After 10 seconds, type this in a terminal window: lsusb The output will be like this: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd. Bus 004 Device 002: ID 413c:3016 Dell Computer Corp. Optical 5-Button Wheel Mouse Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 005: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 002 Device 004: ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth Bus 002 Device 003: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The device is a Huawei modem, so let's look at the output. The relevant entry is: Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd Hence, you must type: sudo modprobe usbserial vendor=0x12d1 product=0x140b 2nd option Download usb-modeswitch and usb-modeswitch-data packages from packages.ubuntu.com. Install them through the command: sudo dpkg -i usb-modeswitch*.deb 3rd option Try a combination of both. but with no result. The modem is still not detected. I've tried to add a new connection but the system can't see my device in setup dialogue. Also I have noticed that when I open eg. terminal and try to type sth, the system freezes for a while.. Thanks for help!

  Read the article

• Firefox on wine crashes on startup on Ubuntu

  - by Iam Zesh

  First, let's explain why I want Firefox under wine, and not the Firefox that is shipped out of the box with Ubuntu. I want to use Firefox under wine because I want to use the Widevine addon, which is "at this time not available for linux". Here is what I did so far to install and use Firefox on wine. On Ubuntu 12.04 LTS, I just installed wine like that: sudo apt-get update; sudo apt-get install wine Then I downloaded the windows installer for Firefox from the mozilla website. I ran the Firefox Setup 25.0.exe file with wine but at the end of the install process when launching Firefox, I got a window notifying me that the program at crashed. I ran Firefox from the command line with wine, to get an idea of what could have went wrong: wine /home/myUser/.wine/drive_c/Program\ Files/Mozilla\ Firefox/firefox.exe fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:process:SetProcessDEPPolicy (1): stub fixme:iphlpapi:NotifyAddrChange (Handle 0x368e8fc, overlapped 0x368e8e0): stub fixme:winsock:WSCGetProviderPath ({e70f1aa0-ab8b-11cf-8ca3-00805f48a192} 0x44fe6f8 0x44fe6b8 0x44fe6e4) Stub! fixme:advapi:RegisterTraceGuidsW (0x1b0e290, 0x39ead80, {509962e0-406b-46f4-99ba-5a009f8d2225}, 3, 0x3974d00, (null), (null), 0x39eadb0,): stub fixme:winsock:WSCGetProviderPath ({e70f1aa0-ab8b-11cf-8ca3-00805f48a192} 0x44fe6f8 0x44fe6b8 0x44fe6e4) Stub! fixme:winsock:WSCGetProviderPath ({11058240-be47-11cf-95c8-00805f48a192} 0x44fe6f8 0x44fe6b8 0x44fe6e4) Stub! fixme:winsock:WSCGetProviderPath ({11058241-be47-11cf-95c8-00805f48a192} 0x44fe6f8 0x44fe6b8 0x44fe6e4) Stub! fixme:winsock:WSCGetProviderPath ({11058241-be47-11cf-95c8-00805f48a192} 0x44fe6f8 0x44fe6b8 0x44fe6e4) Stub! fixme:ntdll:NtLockFile I/O completion on lock not implemented yet fixme:advapi:SetNamedSecurityInfoW L"C:\\users\\myUser\\Application Data\\Mozilla\\Firefox\\Profiles\\cn4oy6kh.default\\extensions.ini" 1 536870916 (nil) (nil) 0x13d40c (nil) fixme:imm:ImmReleaseContext (0x20022, 0x13e850): stub fixme:win:EnumDisplayDevicesW ((null),0,0x32ee18,0x00000000), stub! fixme:shell:ApplicationAssociationRegistration_QueryCurrentDefault (0x143b50)->(L"webcal", 1, 1, 0x32c7a0) fixme:shell:ApplicationAssociationRegistration_QueryCurrentDefault (0x143b50)->(L"ircs", 1, 1, 0x32c7a0) fixme:shell:ApplicationAssociationRegistration_QueryCurrentDefault (0x143b50)->(L"mailto", 1, 1, 0x32c7a0) fixme:shell:ApplicationAssociationRegistration_QueryCurrentDefault (0x143b50)->(L"irc", 1, 1, 0x32c7a0) fixme:alsa:AudioSessionControl_SetGroupingParam (0x153050)->({7b0a93ee-05e7-4576-9cc5-64fdf201f303}, (null)) - stub fixme:alsa:AudioSessionControl_SetGroupingParam (0x153050)->({00000000-0000-0000-0000-000000000000}, (null)) - stub fixme:alsa:AudioSessionControl_UnregisterAudioSessionNotification (0x153050)->(0x6311880) - stub wine: Call from 0x7b839cf2 to unimplemented function dwmapi.dll.DwmGetCompositionTimingInfo, aborting fixme:dbghelp:elf_search_auxv can't find symbol in module Unfortunately I don't know what to do from there on...

  Read the article

• USB drives not recognized all of a sudden

  - by Siddharth

  I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. lsusb results Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful. Thanks.

  Read the article

• missing libjpeg.so.62 from ia32 shared library

  - by user170200

  I am trying to install a chemical/molecular biology modeling program called Molsoft ICM-Pro. Initially after downloading the program and trying to open, it gave me error messages that I was missing shared libraries, and after talking with my network administrator he recommended I install the ia32 shared libraries using sudo apt-get install ia32-libs Which gives sudo apt-get install ia32-libs Reading package lists... Done Building dependency tree Reading state information... Done ia32-libs is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. so I am assuming the libraries installed correctly, but now when I try to run the program I get this error: ubuntu:/home/reilly/icmd icm icm: error while loading shared libraries: libjpeg.so.62: cannot open shared object file: No such file or directory So my question is, where can I get the library containing libjpeg.so.62? Additionally, I was told I would need libXmu.so.6 and libtiff.so.3 . Is there a shared library that could be missing that would contain these files? I am an ubuntu noob, so sorry if the information I provided was unclear. Any help would be immensely appreciated! btw I am using ubuntu 12.04 dual boot with windows on an HP pavilion dv6

  Read the article

• Package manager borked with gforge

  - by Leif Andersen

  I've been having a problem with the package manager. I seemed to have installed gforge, partially, but it keeps giving me errors whenever I install something. (Note that the thing I'm trying to install actually does get installed, but there is always an error returned). Here it is: Creating /etc/gforge/httpd.conf Creating /etc/gforge/httpd.secrets Creating /etc/gforge/local.inc Creating other includes invoke-rc.d: unknown initscript, /etc/init.d/postgresql-8.4 not found. dpkg: error processing gforge-db-postgresql (--configure): subprocess installed post-installation script returned error exit status 100 Errors were encountered while processing: gforge-db-postgresql E: Sub-process /usr/bin/dpkg returned an error code (1) When I try to remove it with: sudo apt-get purge gforge-common I get this: Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: gforge-common* gforge-db-postgresql* 0 upgraded, 0 newly installed, 2 to remove and 9 not upgraded. 1 not fully installed or removed. After this operation, 5,853kB disk space will be freed. Do you want to continue [Y/n]? (Reading database ... 717305 files and directories currently installed.) Removing gforge-db-postgresql ... Replacing config file /etc/postgresql/8.4/main/pg_hba.conf with new version invoke-rc.d: unknown initscript, /etc/init.d/postgresql-8.4 not found. dpkg: error processing gforge-db-postgresql (--purge): subprocess installed pre-removal script returned error exit status 100 Removing gforge-common ... Purging configuration files for gforge-common ... Processing triggers for man-db ... Errors were encountered while processing: gforge-db-postgresql E: Sub-process /usr/bin/dpkg returned an error code (1) And it complains until I do a: sudo apt-get install -f At which point gforge is re-installed. I'm out of ideas, does anyone else have any other ideas with what might be wrong, and more importantly, how I can fix it? Thank you.

  Read the article

• How to Set Ubuntu 12.04 to it's factory settings like when u first installed it?

  - by Cameron

  Well, this is a simple answered question, from the title, but my real problem is hard af. I have set ubuntu to use root, then it wouldn't let me log into the admin account only root and guest I deleted the admin account, remade another, then attempted to disable root account. This failed - I messed up the password, the original password was "root" I also didn't set a password for my new admin account, so It says it has one, whats the default password for it? I can't moderate my ubuntu system at all now. I have tried to drop to cmd shell thing, it asks for the root password, i type 'root' and any other possible passwords, it doesn't work. To reset ubuntu to factory settings i have found that i could enter the following code: sudo dpkg-reconfigure -phigh -a sudo Requires admin password, that I cant find out without root password and I don;t know. My goal is to try to fix this without remaking a bootable usb for ubuntu, because I lost the one i made for this. so If i can't, please say so. If you can help thanks!

  Read the article

• Ubuntu and bumblebee and intel problem

  - by LnxSlck

  I have a brain teaser that i can't solve. When 12.04 (64bits) came out, i did a fresh install and then installed bumblebee with: sudo add-apt-repository ppa:bumblebee/stable sudo apt-get install bumblebee bumblebee-nvidia And Ubuntu recognized (System Settings - Details) Intel Card for primary card, and i could launch applications with optirun. I have: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 520MX] (rev ff) Now, a few days back, i did the exact same thing, installed from the same DVD everything the same, installed bumblebee the same way. Nvidia with Optirun works fine, but Ubuntu doesn't have 3D effects: root@deathstar:~# optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 520MX/PCIe/SSE2 OpenGL version string: 4.2.0 NVIDIA 295.40 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no I never did anything to install Intel drivers (except installing mesa-utils), before bumblebee got everything working, but now i can't get Ubuntu to get Unity with 3D. Can someone help me please get Unity 3d working? Your help will be much appreciated

  Read the article

• Request Tracker 4.x on Ubuntu 12.04

  - by rihatum

  I have a Ubuntu 12.04 server installed on my machine. I am trying to install request-tracker4. Here's what I have done so far : a) Installed request-tracker via "sudo apt-get install request-tracker4" b) I then tried configuring RT_SiteConfig.pm in /etc/request-tracker4 but then ran into problems in populating the MySQL database. c) I then did sudo dpkg-reconfigure request-tracker4 d) It solved my problems of not being able to populate / setup mysql etc. e) Now, I am trying to setup rt under www.mydomain.com/rt I have read various how-to's and bestpractical's own guides but I am not very much a expert in Apache configurations so stuck. My Current Ubuntu 12.04 server setup: Apache2, Fastcgi installed (checked in /etc/apache2/mods-enabled Web Server document root is default /var/www/ Web user www-data Question is : 1 ) Where and What shall I put in Apache configuration to start using RT via the web-interface ? I have seen two files in /etc/request-tracker4/ apache2-fastcgi.conf and apache2-fcgid.conf I even tried making a ln -s apache2-fastcgi.conf /etc/apache2/conf.d but when I tried opening that file in root while in the conf.d directory it said too many levels. Any request tracker experts on ubuntu ?:-) Your help will be very useful and appreciated Thanks Please let me know if you need further info !

  Read the article

• USB Device first mounted as root, then by user

  - by Petr Marek

  When I connect my Kindle, it shows up as an usb0 media, which I can read but not write (owner = root). However, if I do sudo umount /media/usb0, usb0 gets unmounted and a Kindle media gets mounted properly (is writable etc.). What can cause such strange behavior? It's not only with Kindle, but with Flash drives etc. as well. My /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda2 during installation UUID=595815c2-d882-4ec8-a2cd-cce70471167c / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda6 during installation #UUID=1340a336-66ca-4743-a6e4-41a307af2dda /boot ext4 defaults 0 3 # swap was on /dev/sda5 during installation UUID=afa49f1d-d505-4166-82a2-2f44548a48c6 none swap sw 0 0 UUID=deb86039-528a-45f3-b5f9-ce528740c94e /data_hdd ext4 defaults 0 2 My groups: petr@sova:~$ groups petr petr : petr adm cdrom sudo dip plugdev fuse lpadmin sambashare bumblebee

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >